500HP High Voltage Non Contact Proximity Detector
Kusam Meco 500HP High Voltage Non Contact Proximity Detector
- Model No. : 500HP
- Product Description : High Voltage Non Contact Proximity Detector
- System Voltage : 500KV
- Power : 3x1.5V "C" Batteries More Details
As per Kusam Meco's policy
on orders above Rs. 1,000
Frequently bought together
Sealed by “0” rings
8 Voltage Settings : 275 HP : 240VAC, 2KV, 6KV, 11KV, 22KV, 33KV, 132KV and 275KV.
500 HP : 240 Vac, 3.3 KV, 11 KV, 22 KV, 33 KV, 66 KV, 110 KV, 220 KV, 330 KV, 500 KV
High bright LEDs visual indication.
Easy to prove method.
Self test selection.
Use 3 x 1.5V “C” batteries.
High impact nylon casing.
Non-contact work by proximity
Compatible with most link sticks
Light weight, robust, & compact
Suitable for indoor and outdoor use.
Detect low voltage on any systems.
Easy access to batteries
No special parts needed
Simple and efficient to use
Weight : Approx. 500g.
Meets EN61000-3-2, EN61000-3-3, EN61326-1, EN55011, EN61000-4-2, EN61000-4-3,
EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-11
The 275HP / 500 HP is a high voltage proximity detector. It has eight voltage detection settings from 240Vac to 275KVac / 500 KV AC. The 275HP / 500 HP consists of an internal pickup sensor plate, a sensitivity selector, a visual and a sound annunciator. With the 275HP / 500 HP, physical contact with electrical conductors is not necessary when testing for live lines. This tester works by proximity.
Its sensor senses the radiated field which surrounds live conductors. Radiated field strength increases with voltage and decreases quickly with distance or earth shielding. The radiated field from a cable of closely bunched conductors supplied by three phase power tends to cancel (See “Limitations of use” paragraph). Detecting distance of a 250Vac single live wire is approximately 10cm. With a bunched neutral and earth cable, as in a flexible cable, the distance is reduced to 5cm.
Some of the typical uses are : identify and check live cables; find fault in flexible cables; check earth equipment; service neon lightning; trace live wires; check high frequency radiation; detect residual or induced voltages. For example, faults in damaged flexible cables are found by applying low voltage to each conductor. Earthing the remainder and moving the tester along the cable until the change in condition is obtained. (Flexible cables which are used in mining and building industries, are readily repairable when the break in the cable is located.)
When testing for high voltage, the rotary switch (attenuator) is used to identify and differentiate various HV live cables. The tester must be used in conjunction with a long and insulating rod when measuring high voltage (KV). However, the 275HP is a non-contact tester and it is advised that the tester should never come into contact with cables (KV) as this tester is merely a non-contact AC proximity tester.
Checking or proofing the tester is easy. Switch the sensitivity to 240V and place the dome against a low voltage live conductor or rub the dome with a cloth or against an item of clothing as this generates a static DC which triggers the detection of circuit. The light and beeper should go “on” as if a live wire is being.
This Item is Non-Returnable
Price per piece : Rs. 10,613 (10.35 % OFF)