Thank you !!

Your Free Gift is Awaiting in your Inbox

Home IT & Electronics Network Components Routers & Access Point Aruba Access Point IAP-225 Series220

Aruba Access Point IAP-225 Series220

Name: Aruba Access Point IAP-225 Series220
Brand: Aruba
SKU: ITE.ROU.14593521
Price: 76082 INR
Availability: OutOfStock

by Aruba

Earn upto 200 IB coinsi

★ ★ ★ ★

Features
Brand Name :	Aruba
Model No :	IAP-225
Type of Product :	Access Point
Wireless Standards :	AP type: Indoor, dual radio, 5 GHz 802.11ac and 2.4 GHz 802.11n In addition to 802.11n data rates, the 2.4-GHz radio supports 802.11ac data rates using 256-QAM modulation. This gives TurboQAM-enabled clients a 33% boost above the maximum supported data rate. Software-configurable dual radio supports 5 GHz and 2.4 GHz 3×3 MIMO with three spatial streams and up to 1.3 Gbps wireless data rate Supported frequency band (country-specific restrictions apply): 2.4000 GHz to 2.4835 GHz 5.150 to 5.250 GHz 5.250 to 5.350 GHz 5.470 to 5.725 GHz 5.725 to 5.850 GHz Available channels: Dependent upon configured regulatory domain Dynamic frequency selection (DFS) optimizes the use of available RF spectrum Supported radio technologies: 802.11b: Direct-sequence spread-spectrum (DSSS) 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM) 802.11n/ac: 3×3 MIMO with up to three spatial streams Supported modulation types: 802.11b: BPSK, QPSK, CCK 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM 802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM Transmit power: Configurable in increments of 0.5 dBm Maximum (aggregate, conducted total) transmit power (limited by local regulatory requirements): 2.4-GHz band: +23 dBm 5-GHz bands: +23 dBm Advanced cellular coexistence (ACC) feature to effectively deal with interference from cellular systems Maximum ratio combining (MRC) for improved receiver performance Cyclic delay diversity (CDD) for improved downlink RF performance Short guard interval for 20-MHz, 40-MHz and 80-MHz channels Space-time block coding (STBC) for increased range and improved reception Low-density parity check (LDPC) for high-efficiency error correction and increased throughput Transmit beam-forming (TxBF) for increased reliability in signal delivery Supported data rates (Mbps): 802.11b: 1, 2, 5.5, 11 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 802.11n: 6.5 to 450 (MCS0 to MCS23) 802.11ac: 6.5 to 1,300 (MCS0 to MCS9, NSS = 1 to 3) 802.11n high-throughput (HT) support: HT 20/40 802.11ac very high throughput (VHT) support: VHT 20/40/80 802.11n/ac packet aggregation: A-MPDU, A-MSDU
Dimension :	203x203x54 mm
Operating Humidity :	5% to 93% non-condensing
More Details

More Aruba Routers & Access Point More Routers & Access Point Router Buying Guide

Warranty
As per Aruba's policy
100% Original
Products
Free Shipping
on orders above Rs. 1,000
Secure
Payments
100% buyer
Protection
EARN
IB Coins

Ultra-fast 220-series 802.11ac APs offer the highest performance in high-density environments and can be managed by a Mobility Controller or deployed in controllerless Aruba Instant mode.

Operating at 1.3 Gbps in the 5-GHz band and 600 Mbps in the 2.4-GHz band, these three-stream APs are up to three-times faster than 802.11n APs.

The AP-225 and IAP-225 have six integrated omni-directional downtilt antennas, while the AP-224 and IAP-224 feature three RP-SMA connectors for external dual-band antennas.

Not just faster, smarter

With AppRF^TM and ClientMatch^TM, 210-series APs protect business-critical apps and eliminate sticky clients while roaming.

Friendly to Aruba Bluetooth Beacons

Connect Aruba Beacons to any 210-series USB port to deliver indoor location services that can be centrally managed.

Two hands better than one

A second Gigabit Ethernet port on the 220 series doubles the network backhaul capacity and acts as a redundant link.

Disclaimer: The above item can be returned only if found dead on arrival. Industrybuying does not bear any responsibility for any concerns you may experience with the purchased item thereafter. Please contact the manufacturer should you encounter any problems with the product

Buy Aruba Access Point IAP-225 Series220 online in India at wholesale rates. If you have been looking for Aruba Access Point IAP-225 Series220 dealers, your search ends here as you can get the best Aruba Access Point IAP-225 Series220 distributors in top cities such as Delhi NCR, Mumbai, Chennai, Bengaluru, Kolkata, Chennai, Pune, Jaipur, Hyderabad and Ahmedabad. You can purchase Aruba Access Point IAP-225 Series220 of the finest quality and rest assured to get the best in terms of both durability and performance. If you are bothered about the Aruba Access Point IAP-225 Series220 prices, you can be totally sure to get the best rates as Industrybuying brings you genuine Aruba Access Point IAP-225 Series220 rates and quality assured products only from the best of brands with exclusive brand discounts you won’t find anywhere else. Procure Aruba Access Point IAP-225 Series220 today and avail the best offers on your purchase.

SKU

: ITE.ROU.14593521

Model No

: IAP-225

Type of Product

: Access Point

Wireless Standards

: AP type: Indoor, dual radio, 5 GHz 802.11ac and 2.4 GHz 802.11n In addition to 802.11n data rates, the 2.4-GHz radio supports 802.11ac data rates using 256-QAM modulation. This gives TurboQAM-enabled clients a 33% boost above the maximum supported data rate. Software-configurable dual radio supports 5 GHz and 2.4 GHz 3×3 MIMO with three spatial streams and up to 1.3 Gbps wireless data rate Supported frequency band (country-specific restrictions apply): 2.4000 GHz to 2.4835 GHz 5.150 to 5.250 GHz 5.250 to 5.350 GHz 5.470 to 5.725 GHz 5.725 to 5.850 GHz Available channels: Dependent upon configured regulatory domain Dynamic frequency selection (DFS) optimizes the use of available RF spectrum Supported radio technologies: 802.11b: Direct-sequence spread-spectrum (DSSS) 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM) 802.11n/ac: 3×3 MIMO with up to three spatial streams Supported modulation types: 802.11b: BPSK, QPSK, CCK 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM 802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM Transmit power: Configurable in increments of 0.5 dBm Maximum (aggregate, conducted total) transmit power (limited by local regulatory requirements): 2.4-GHz band: +23 dBm 5-GHz bands: +23 dBm Advanced cellular coexistence (ACC) feature to effectively deal with interference from cellular systems Maximum ratio combining (MRC) for improved receiver performance Cyclic delay diversity (CDD) for improved downlink RF performance Short guard interval for 20-MHz, 40-MHz and 80-MHz channels Space-time block coding (STBC) for increased range and improved reception Low-density parity check (LDPC) for high-efficiency error correction and increased throughput Transmit beam-forming (TxBF) for increased reliability in signal delivery Supported data rates (Mbps): 802.11b: 1, 2, 5.5, 11 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 802.11n: 6.5 to 450 (MCS0 to MCS23) 802.11ac: 6.5 to 1,300 (MCS0 to MCS9, NSS = 1 to 3) 802.11n high-throughput (HT) support: HT 20/40 802.11ac very high throughput (VHT) support: VHT 20/40/80 802.11n/ac packet aggregation: A-MPDU, A-MSDU

Dimension

: 203x203x54 mm

Operating Humidity

: 5% to 93% non-condensing

Power Supply

: Worst-case power consumption from the AP (excluding power drawn by an attached USB device): In restricted mode (PoE): 13.5 watts In unrestricted mode (PoE): 17 watts In unrestricted mode (DC): 15.5 watts Power sources sold separately Direct DC source: 12 Vdc nominal, +/- 5% Power over Ethernet (PoE): 48 Vdc (nominal) 802.3af or 802.3at-compliant source Efficient mode PoE – power save with 802.3af PoE and limited functionality on 2.4 GHz USB port disabled Second Ethernet port disabled 2.4-GHz 802.11n radio in 1×3:1SS mode Unrestricted functionality with 802.3at PoE+

Series

: 220 series

Operating Temperature

: 0° C to +50° C (+32° F to +122° F)

Storage Temperature

: -40° C to +70° C (-40° F to +158° F)

Weight

: 750 g

Interface

: Two 10/100/1000BASE-T Ethernet network interfaces (RJ-45) Auto-sensing link speed and MDI/MDX PoE-PD: 48 Vdc 802.3af PoE or 802.3at PoE+ DC power interface, accepts 1.7/4.0mm center-positive circular plug with 9.5 mm length USB 2.0 port (Type A connector) Serial console interface (RJ-45, TTL levels) Visual indicators (LEDs): Power/system status Ethernet link status (2x; ENET0, ENET1) Radio status (2x; RAD0, RAD1) Kensington security slot Reset button

Certification

: CB Scheme Safety, cTUVus UL2043 plenum rating Wi-Fi Alliance certified 802.11a/b/g/n/ac CB Scheme Safety, cTUVusWi-Fi Alliance-certified 802.11a/b/g/n/ac

Mounting

: Included with AP: Mounting brackets (2) for attaching to 9/16-inch or 15/16-inch T-bar drop-tile ceiling Optional mounting kits: AP-220-MNT-C2: Aruba 220 series AP mount kit contains two ceiling-grid rail adapters for Interlude and Silhouette style rails. AP-220-MNT-W1: Aruba 220 series AP mount kit contains one flat-surface wall/ceiling mount bracket. AP-220-MNT-W3: Aruba 220 series AP mount kit contains one flat-surface wall/ceiling secure mount cradle

Specifications

: AP-225 and IAP-225 2.4-GHz (600 Mbps max) and 5-GHz (1.3 Gbps max) radios, each with 3×3 MIMO and three integrated omni-directional downtilt antennas AP-224 and IAP-224 2.4-GHz (600 Mbps max) and 5-GHz (1.3 Gbps max) radios, each with 3×3 MIMO and three combined, diplexed external antenna connectors

Antenna Type

: AP-224: Three RP-SMA connectors for external dual-band antennas AP-225: Six integrated down-tilt omni-directional antennas for 3×3 MIMO with maximum antenna gain of 3.5 dBi in 2.4 GHz and 4.5 dBi in 5 GHz. Built-in antennas are optimized for horizontal ceiling mounted orientation of AP-225.

Regulator

: FCC/Industry of Canada CE Marked R&TTE Directive 1999/5/EC Low Voltage Directive 2006/95/EC EN 300 328 EN 301 489 EN 301 893 UL/IEC/EN 60950 EN 60601-1-1, EN60601-1-2 For more country-specific regulatory information and approvals, please see your Aruba representative.