For any query, email us at or call us on +91 8448449073
Home Adhesives Sealants and Tape Cyanoacrylate Adhesives

Cyanoacrylate Adhesives

(1-60 products of 153)
Rs. 83 Rs. 60 / Piece
MOQ- 10.0 Pieces
Rs. 428 Rs. 399
Pack of 20 Grams
Rs. 3,879 Rs. 2,880 / Piece
Rs. 23,578 Rs. 16,800 / Piece
Rs. 413 Rs. 308 / Piece
MOQ- 5.0 Pieces
Rs. 3,888 Rs. 2,880 / Piece
Rs. 1,908 Rs. 1,480 / Piece
Rs. 2,946 Rs. 2,180 / Piece
Rs. 38,973 Rs. 29,900 / Piece
Rs. 130 Rs. 84 / Piece
MOQ- 12.0 Pieces
Rs. 88 Rs. 72 / Piece
MOQ- 10.0 Pieces
Rs. 3,534 Rs. 2,990 / Piece

Buy Cyanoacrylate Adhesives Online At Industrybuying

Cyanoacrylate is a swift and strong bonding clear adhesive with a quick-drying essence. Once it is cured it alters in the state of polymer resin, otherwise, it remains in the monomer form, when uncured. Some of the Key Features are:

  • 0.015mm to 0.5mm is the standard gap-fill range for cyanoacrylates.
  • The Temperature resistance varies from -55 to +250°C.
  • Wicking grade to thixotropic no flow gel is the basic Viscosity range.



The major classes of Cyanoacrylate are:

1. Methyl 2-Cyanoacrylate

2. Ethyl 2-Cyanoacrylate (Superglue)

3. N-butyl Cyanoacrylate

4. 2-Octyl Cyanoacrylate (Used for medical purposes)



In simple terms, curing can be defined as the chemical reaction process, where Cyanoacrylate changes its form. Strengthening and toughening of the chemical substance linkage, takes place at particular temperatures and humidity levels. It can be facilitated by UV lights, radiation, heat, and moisture. The bond formed is uncompromisingly rigid justifying its optional yet famous name, ‘Super Glue’. 



Strong adhesives are entailed with several potential problems that can be caused if not conformed in a precautionary way. Some primary problems can be-

1. A Lack of bonding between the surfaces and glue. This can majorly emerge due to a lack of moisture present on some surfaces and can work out if a thin layer of water is applied to the texture before initiating the curing process. This method might not work with all cases such as on heat-resistant plastic surfaces. In such cases, epoxy resin can be used for binding.

2. A strong bond with disfavored surfaces, for example, wrong boards, and workers' skin. Acetone can be used to reduce the bond, eliminating glue residue from unwanted spots.



Sometimes, it seems impossible to reach small surfaces or gaps, or certain delicate surfaces that certainly require a tiny proportion of glue or a very strategic application. In such circumstances, a precision needle can be used, it is a disposable needle of high quality and low cost, that comes with many fixtures.  It is used with the Luer lock adapter, which then can be connected with the glue bottle allowing a clean and convenient way of dispensing the glue.



Hybrid Cyanoacrylate provides sound structural strength and elasticity to other adhesives. It provides more manageable bonding of ragged surfaces by its extraordinary gap-filling qualities, whereas Low viscosity cyanoacrylate adhesives fail to fulfil this. Stating an example, The Loctite Cyanoacrylate Epoxy Hybrid Structural Adhesive is a two-part cyanoacrylate epoxy combination, and Loctite Two-Part Gel is a urethane cyanoacrylate. These take a longer curing time. 



1. What is the shelf life of Cyanoacrylate? 

The shelf life of Cyanoacrylate depends on the type of product, the setting of the manufacturing unit, and its storehouse. Generally, it works for 12 months if unopened and around four to eight weeks if opened. This timeline commonly goes for most cyanoacrylate products.


2. What is the average cure time of Cyanoacrylate Adhesives?

This entirely hinges on the surface you are operating on, but commonly for fixtures, it takes 5 to 90 seconds, and for accurate curing 8 to 24 hours.


3. How to prepare a surface before the application of Cyanoacrylate Adhesives?

For a perfect application, a downright clean surface is a must. So focus on removing dust, dirt, and oil, and clean the surface, ensuring it is tidied with a little bit of moisture. If the surface is dusty and dry, no bond can be formed since it requires some amount of moisture to form a tight chain with the surface, shaping a strong bond between glue and surface.


4. Is it possible to glue flexible surfaces and rubber?

In such cases, movements might disassemble the sealant so it is suggested to use a flexible glue type with the rubber additives for better application.


5. What to do if fingers accidentally get glued?

Acetone is the best alternative in such cases but it can also be scrapped away with the help of a little force, for example, you can use a pen or pencil or similar object to put a little pressure between the glued fingers diluting the bond.


6. How to remove super glue from surfaces?

Removing super glue can be a tricky task. It can be removed with a special cyanoacrylate remover, a solvent, but it should be done with excessive sustenance as it can adversely affect the plastic or the surface as well. Or it can be removed with prolonged soaking, it is not a time-efficient method but it certainly is a mild option, soak the surface with soap and water for several hours, and it will eventually soften the glue, so that it can easily be scuffed off the cover.


7. Is it possible to glue porous surfaces like paper or leather?

Cyanoacrylate works best for porous surfaces to fill in the small gaps and surfaces.


8. When should we use a primer with Cyanoacrylate Adhesives?

A primer supports the texture for acceptable gluing, these are primarily used on inactive surfaces along with the guidance material. To note, primers are not necessarily efficacious on all surfaces; therefore it is advised to confer manufacturers manual.


Top Selling  Cyanoacrylate Adhesives on



S. No


Market Price

Industrybuying Price


 Loctite 454 Instant Adhesive 20 gm

Rs. 824

Rs. 801


Loctite 480 Instant Adhesive 20 gm




Loctite 425 Instant Adhesive surface Curing Threadlocker 20

Rs. 1,441

Rs. 1,083

4 Mxbon B684 Cyanoacrylate Adhesive 20 gm 

Rs. 400

Rs. 372


Fevikwik 203 Cyanoacrylate Adhesive - 20gm (Pack of 3)  Rs.380

Rs. 208


Loctite Sicomet Instant Adhesive 20 gm




Loctite Instant Adhesive

Rs. 1,310

Rs. 1,260


CRC 30383 Instant Adhesive 500ml

Rs. 692

Rs. 665



Please share your feedback and help us improve!

Thank You

for your valuable feedback

Please enter your e-mail address and we will send you a confirmation mail to reset your password.

Forgot Password

Reset Password

Your password has been reset successfully.
To sign in with your new password,

Do you want to add Nestle 3 Options Coffee Tea Vending Machine to cart?
Enter Details for faster checkout

Sign In with your Industrybuying Account
Thanks for submitting your feedback! Rate recent shopping experiences

Rate your shopping experience

Based on shopping experience of how likely are you to recommend industrybuying to a friend or colleague?

Not at all
May be
Yes, for Sure!
Thanks for submitting your feedback!