For any query, email us at or call us on +91 8448449073
Home Pneumatics Vacuum Pumps

Vacuum Pumps

(1-7 products of 7)

Buy Vacuum Pumps Online At Industrybuying


A Vacuum Pump is an equipment that pushes gas or air molecules out of a sealed chamber to create a partial or low-pressure vacuum. A vacuum is a situation in which the chamber pressure is lower than that of the surrounding atmosphere or systems. Absolute vacuum, on the other hand, has a pressure of 0 Pa and is devoid of gas molecules.


Atmospheric pressure is one of the most important components for the working of a Vacuum Pump. The weight of air molecules creates this pressure that decreases at greater altitudes. The operation of equipment, particularly vacuum pumps, is influenced by air pressure or atmospheric pressure. As molecules travel from high to low places to fill a space, pressure strives to equalise, a process that is based on the idea of pushing molecules.


All Vacuum Pumps have the same goal: to turn energy into pressure. The amount of energy required to operate a pump varies with air pressure. The more air pressure there is, the more efficiently a Vacuum Pump can operate. Because atmospheric pressure is so critical to Vacuum Pump efficiency, it's a big influence in the cost of running one. It varies depending on temperature, humidity, and altitude.


Application of Vacuum Pumps

The following are some of the Vacuum Pump's applications.


These Pumps are employed in a variety of industrial and scientific procedures, including sophisticated plastic moulding, vacuum tubes, CRTs, electric lamp manufacturing, semiconductor processing, dry etch, notably ion implant, and ALD, PVD, CVD, and PECVD photolithography deposition, among others.


The Vacuum Pump is employed to keep mechanical devices in place. These Pumps, for example, can be mounted to the engine in hybrid and diesel vehicles. This pump can be used to power car components such as hydraulic brakes, dampers, throttle drivers, and door locks, among other things. The source of vacuum is typically employed to drive gyroscopes within a variety of flight instruments, and these pumps are used in an aircraft.


Advantages of Using Vacuum Pumps

The following are some of the benefits of Vacuum Pumps:


  1. These Pumps are used for suction and transport waste from a mining camp.
  2. These include spill prevention as well as odour control capabilities, allowing for convenient and safe transport of bio-solids products.
  3. The primary goal of these Pumps is to securely transport hazardous chemicals and prevent deadly waste from entering the environment.
  4. They remove waste quickly and from clogged drains, which saves time and allows the operation to be completed sooner.
  5. These are commonly found in power jets, tipping tanks, and rear doors, and are suitable for a wide range of applications.


Disadvantages of Using Vacuum Pumps

Every piece of equipment can falter. The main risk while using a Vacuum Pump is of spillage. There are certain obvious disadvantages of Vacuum Pumps listed below:


1. If the equipment fails, place the pump on the spill tray to contain oil spillage.

2. Place any glassware under Vacuum Pumps to protect it.

3. Make sure all Vacuum Pump belt systems are guarded physically.

4. Defects in electrical cords and switches must be avoided.

5. Don't put Pumps in a receptacle that isn't well-ventilated or enclosed.

6. Never operate a Pump near flammable materials.

7. Use the proper Vacuum tubing and replace any that are worn out.

8. To avoid exposure to chemicals, use engineering controls

9. Make sure the pump oil is compatible with the vapours that will travel through it (i.e., don't use hydrocarbon pump oil with oxidising gases or vapours).

10. To avoid putting oil into the system, close the valve between the vessel and the Pump before turning it off.

11. Ascertain that no fumes or vapours will harm the Pump.

12. Check for obstruction if cold traps are utilised.

13. Check the oil level and replace it if needed. When the oil starts to turn a dark brown hue, it's time to change it.

14. To prevent oil loss, an oil mist separator can be employed.

15. People in the spill's immediate vicinity should be warned.

16. If the spilled material is flammable, switch off all sources of ignition and heat. Turn off all other switches and don't light the bunsen burners.

17. If feasible, open the windows on the outside.

18. Protect yourself with safety goggles, gloves, and a long-sleeve lab coat.

19. Avoid inhaling spilled vapours.

20. Contain the spill as much as possible in a small area.

21. Do not pour spilled liquid down the drain.

22. To absorb spills, use the proper spill kits/sorbents. Place all contaminated goods and residues in a container.

21. Assist injured or polluted people and keep them out of harm's way.

22. If the spilled material is flammable, switch off all sources of ignition and heat. Turn off all other switches and don't light the Bunsen burners.

23. Shut any doors leading to the affected area.

24. Put up signs to keep people out of the area.

25. Have someone on hand who is familiar with the situation and the laboratory to assist emergency responders.


Top-Selling Brands of Vacuum Pumps at Industrybuying 

Tarson, Z Premium, Falcon, Tanco, Scientech, Rex, Kirloskar, Rothenberger, Axiva, Invento and various other leading brands are available at Industrybuying with affordable prices. 

Leading Brands Providing Vacuum Pumps at Industrybuying


S. No


Market Price

Industrybuying Price


Tarson TM Vacuum Pump 7010 Rockyvac 300




Tarson TM Vacuum Pump 7011 Rockyvac 400




Tanco VPO- 45 Diaphragm Vacuum Pump




Axiva AXICHEM 410 Axichem Vacuum Pump




Tanco PLT-250 Capacity 280 ml Mono Block Vacuum Pump




Axiva V300 Oil Free Vacuum Pumps For Laboratory




Frequently Asked Questions

1. What are Vacuum Pumps designed for?

Vacuum Pumps are designed to evacuate and condense gases, as well as maintain continuous low pressures suitable for vacuum furnaces. Vacuum pumps can also be used in testing new products or material samples.


2. Where can Vacuum Pumps be used?

Vacuum Pump, designed for use in multiple applications like refrigeration, automotive and many more. It will deliver a stable high performance with quick start-up that can handle heavy duty applications.


Please share your feedback and help us improve!

Thank You

for your valuable feedback

Please enter your e-mail address and we will send you a confirmation mail to reset your password.

Forgot Password

Reset Password

Your password has been reset successfully.
To sign in with your new password,

Do you want to add Nestle 3 Options Coffee Tea Vending Machine to cart?
Enter Details for faster checkout

Sign In with your Industrybuying Account
Thanks for submitting your feedback! Rate recent shopping experiences

Rate your shopping experience

Based on shopping experience of how likely are you to recommend industrybuying to a friend or colleague?

Not at all
May be
Yes, for Sure!
Thanks for submitting your feedback!