Invento 5V-10V 20kg Load Cell Digital Electronic Kitchen Weighing Scale Sensor ISC 1466-2

Invento Load Cell Digital Portable Electronic Kitchen Scale Weighing Sensor is a special type of sensor that can accurately measure force, weight, or tension. The HX711 breakout board works with the load cell to convert this measurement into an accurate digital output that can be read by a microcontroller or other device. The HX711 breakout board has four pins: power, ground, data in, and data out. It requires 5 volts DC at up to 100 milliamps, and it generates a square wave signal on its data out pin. The Invento Load Cell Digital Portable Electronic Kitchen Scale Weight Weighing Sensor For Scale comes with 22 cm wires attached to its load cell and four holes drilled into the side of its plastic casing. These holes are threaded for M4 screws and spaced 15 mm apart. The wires from the load cell are soldered to the HX711 breakout board so that the pins labeled E+, E-, A+, and A- correspond to the red wire of the load cell, black wire of the load cell, green wire of the load cell, and white wire of the load cell respectively.

The load cell is made from aluminum alloy with strain gauges pre-attached. The resulting weight and force sensor is mounted onto the underside of the weighing platform and is sensitive enough to detect very small changes in weight. A sophisticated circuit board converts the analog signal output by the load cell into digital signals that can then be used by computers or other devices to measure weight. The load cell comes with 22 cm (8.5 in) wires pre-attached with strain reliefs that allow you to connect directly to standard 4-pin 0.1" pitch header connectors commonly found on measuring devices such as an HX711 or Arduino Zero. The wires are long enough that they will reach standard breadboards, but they will not reach through multiple layers of breadboards or shields.

Features:

• Load cell：Sturdy aluminum alloy construction with strain gauges pre-attached with strain relieved wires.
• Load cell specs: 22 cm (8.5 in) wire leads pre-attached. Dimensions 12.7 mm high, 12.7 mm wide, 80 mm long (0.5 in x 0.5 in x 3.15 in). 4 mounting holes, 15 mm spacing on each side. One both holes tapped M4 thread, the other side both holes tapped M5 thread.
• 5-10V drive voltage applied, the force is directly output as a voltage change signal.
• Connection (to HX711): Red to E+ ; Black to E- ; Green to A+ ; White to A-

Buy Invento 5V-10V 20kg Load Cell Digital Electronic Kitchen Weighing Scale Sensor ISC 1466-2 online in India at wholesale rates. If you have been looking for Invento 5V-10V 20kg Load Cell Digital Electronic Kitchen Weighing Scale Sensor ISC 1466-2 dealers, your search ends here as you can get the best Invento 5V-10V 20kg Load Cell Digital Electronic Kitchen Weighing Scale Sensor ISC 1466-2 distributors in top cities such as Delhi NCR, Mumbai, Chennai, Bengaluru, Kolkata, Chennai, Pune, Jaipur, Hyderabad and Ahmedabad. You can purchase Invento 5V-10V 20kg Load Cell Digital Electronic Kitchen Weighing Scale Sensor ISC 1466-2 of the finest quality and rest assured to get the best in terms of both durability and performance. If you are bothered about the Invento 5V-10V 20kg Load Cell Digital Electronic Kitchen Weighing Scale Sensor ISC 1466-2 prices, you can be totally sure to get the best rates as Industrybuying brings you genuine Invento 5V-10V 20kg Load Cell Digital Electronic Kitchen Weighing Scale Sensor ISC 1466-2 rates and quality assured products only from the best of brands with exclusive brand discounts you won’t find anywhere else. Procure Invento 5V-10V 20kg Load Cell Digital Electronic Kitchen Weighing Scale Sensor ISC 1466-2 today and avail the best offers on your purchase.