Astral 1L White Trubuild - BWP 222 Binder Waterproofer M003801042

• Trubuild BWP-222 (Binder & Waterproofer) is an acrylic co-polymer emulsion which is used as bonding agent for new substrate to old substrates and as cement mortar modifier which gives an excellent bond to old and new concrete. If added in concrete, it increases the tensile and flexural strength and life of concrete. If it is mix with cement to make a slurry then it can be used as waterproofing coating.
• Trubuild BWP-222 is a two component water based product that contains a modified acrylic polymer system which will cure at low temperatures (below 20°C). It has been designed for use as a bonding agent in most substrates such as concrete, masonry or brickwork where there is no movement or expansion between these materials.

Applications

• TRUBUILD BWP-222 is a two component epoxy resin based high performance concrete repair mortar. It is used for different concrete repair application like spalled concrete, floor, columns, beams, slab and parapet etc.
• It is also used as an additive for repair mortar which gives a bonding strength of more than 15 MPa.
• It is also used for priming of re-enforced steel bars to make them corrosion free and to prevent corrosion in fresh water tanks and pipelines.

Advantages

• TRUBUILD BWP-222 is a water proofing admixture that is made up of polyester polyol. It is compatible with all common cements and works as a dust proof sealer.
• The main features of this product are:
• Free from chloride content
• Single component product and easy to use due to its low viscosity
• It improves the strength as well as water proofing of cement which ultimate increases durability as well as flexural strength of cement & cementitious compositions
• It is compatible with all common cements and works as a dust proof sealer

How to use

Surface Preparation

• The surface should be clean and dried before application. It should be free from dust, unsound material, loose plaster, oil, paint, grease, algae and corrosion deposits.
• If the surface is dirty or greasy, it must be cleaned with a suitable solvent. In case of oily surfaces, it is recommended to wash down the surface with water first in order to remove any oil residue.

Steel Priming for reinforcement

• The key to a successful repair is the preparation of the surface. The surface should be completely soaked with water and then make slurry of 1:1 ratio of Trubuild BWP and cement and apply one coat on exposed steel and allow it to dry. After initial drying of first coat, second cost is to be done and then again allow it to dry. The repair or top mortar application should be carried out when then slurry coating is still tacky. Same slurry can be used for achieving water proofing.
• The product is designed for priming of reinforced steel all corroded steel should be exposed fully and all loose scale and corrosion deposits will remove

Bonding Slurry Coat

• Trubuild BWP-222 is an admixture for bonding slurry coat mix, it acts as a water proofing additive with cement to give waterproofing. It is used in commercial and industrial concrete applications.
• It is also used in marine concrete applications such as dock pilings where extra bonding is required.
• Trubuild BWP-222 can also be used as a bonding agent for mortar mixes, with or without the addition of Portland cement.

Render & Mortars

• Trubuild BWP-222 is a cement based product for rendering and patching repair mortar application.
• For render and patching repair mortar application quantities are to be mix (Cement: 50 kg, Sand: 150 kg, Trubuild BWP: 20 Ls & Sufficient water to get required consistency)
• Trubuild BWP-222 is a ready mixed, quick setting, self leveling concrete repair mortar which can be used for repairing concrete surfaces such as driveways, patios and paths. The product offers excellent adhesion to most common building materials including concrete, tarmacadam and brickwork depending on the surface preparation. The mix is easy to use by hand or mechanical mixing equipment.

As Curing Agent

• Trubuild BWP-222 is a water pumpable calcium sulfoaluminate based compound, containing chromium and zinc. It acts as curing agent by preventing the rapid loss of water from the concrete during initial curing period. In drastic drying conditions it give added curing advantages.

Buy Astral 1L White Trubuild - BWP 222 Binder Waterproofer M003801042 online in India at wholesale rates. If you have been looking for Astral 1L White Trubuild - BWP 222 Binder Waterproofer M003801042 dealers, your search ends here as you can get the best Astral 1L White Trubuild - BWP 222 Binder Waterproofer M003801042 distributors in top cities such as Delhi NCR, Mumbai, Chennai, Bengaluru, Kolkata, Chennai, Pune, Jaipur, Hyderabad and Ahmedabad. You can purchase Astral 1L White Trubuild - BWP 222 Binder Waterproofer M003801042 of the finest quality and rest assured to get the best in terms of both durability and performance. If you are bothered about the Astral 1L White Trubuild - BWP 222 Binder Waterproofer M003801042 prices, you can be totally sure to get the best rates as Industrybuying brings you genuine Astral 1L White Trubuild - BWP 222 Binder Waterproofer M003801042 rates and quality assured products only from the best of brands with exclusive brand discounts you won’t find anywhere else. Procure Astral 1L White Trubuild - BWP 222 Binder Waterproofer M003801042 today and avail the best offers on your purchase.