Knifing Paste Filler

Trubuild CFP 525 is a cement-based polymer modified powder material for filling cracks in plastered surface. It is composed of cement, select aggregates, polymer & additives which requires on site addition of water only. Cracks filled with Trubuild CFP-525 enhance the subsequent paintings quality and life. Trubuild CFP 525 can be used to fill both vertical and horizontal cracks in the plaster. The filler must be applied using a panner with flex head, CrV steel. Applications Trubuild CFP 525 is a flexible, fast setting, high strength self-leveling compound for interior and exterior application. It is ideal for filling voids, leveling joints, and repairing cracks and other surfaces. To fill static cracks of 3 to 5 mm. To level undulation on un plastered or plaster celling’s and walls prior to painting. To provide smooth finish to brick, stone, and concrete For crack filling – Fill the mixed paste into the crack by spatula or putty knife blade. Fill excess material and tool it by putty knife blade pressing against crack so that air voids get filled. By wet finger tool the surface of material in to a concave nature by pressing against joint edges For Surface levelling – The mixed smooth paste should be applied by painter blade on the dampened wall or ceiling. The material should be applied at the desired thickness in bottom- to -up fashion to avoid blade marks. For multiple coat applications the previous coat should be allowed to cure for minimum 6 hrs. The subsequent coat should be at the right angle to the previous coat Advantages Trubuild CFP 525 is a high quality, fast setting cement based paintable screed that provides a smooth, level and durable finish. The product is suitable for use on internal and external floors, particularly where heavy traffic is expected. The product offers the following benefits: Adhesion - Strong adhesion to common building substrates Easy to use - It is a do it yourself product & requires only onsite addition of water Requires only addition of water on - site at the time of usages. As surface leveller before painting it reduces paint consumption and increases the life of the paint making it economical How to Use Trubuild CFP-525 is an advanced polymer modified bitumen based repair material. It is a polymeric blend that combines the properties of bitumen with polymers. The product has high adhesion, flexibility and durability. The product is designed to be used in various applications like filling deep holes, cracks and fissures, sealing joints and edges etc. Trubuild CFP-525 can be applied on various surfaces including concrete, asphalt and masonry surfaces. The product works well in high temperature conditions up to 95°C (200°F). Restriction of Usage Trubuild CFP-525 is for static joint filling only. Suitable for cracks less than 5mm width It does not accommodate any movements and thus it is not suitable for dynamic cracks For outside use the Trubuild CFP-525 must be coated over with exterior paint to prevent water penetration Trubuild CFP-525 is easy to mix, apply and clean up with water. No special tools or equipment are required for application.

Astral White Trubuild - CFP 425 Crack Filler Paste" is a product manufactured by Astral, a company specializing in construction and building materials. As a crack filler paste, CFP 425 is designed to repair cracks and imperfections in various surfaces such as concrete, masonry, plaster, and drywall. The "White" designation suggests that this crack filler paste is colored white, which can be advantageous for achieving a uniform appearance, particularly when used on surfaces that will be painted or finished. Trubuild indicates that it's part of Astral's range of construction products, known for their quality and reliability.