• Home /
• Adhesives Sealants and Tape /
• Structural Adhesives

Have a question? Call us now at +91 9650660070

Structural Adhesives

Showing 36 out of 36 products

Sort by

Recommended New Price : Low to High Price : High to Low

Ships within 24 hrs

Hilti HIT-RE 10 Injectable Mortar

By Hilti

₹4,148  

Features The economical injection mortar solution that can replace virtually all grout fastenings Suitable for post-installed rebar and concrete anchoring applications in accordance with Hilti technical data Compatible with Hilti’s full range of accessories (e.g. cordless electric dispenser, steel brushes, piston plug) Available in 580 ml hard cartridge, suitable for use under severe on-site conditions Allows flexible installation due to the long working time Applications Substitution of misplaced/missing rebar Connection of secondary post-installed rebar (e.g. staircases, upstands) Renovation/upgrading of post-installed rebar Rebar dowelling Anchoring non-structural secondary steel elements (e.g. columns, beams)

Add to Cart Buy Now

Ships within 24 hrs

Hilti HIT-HY 170 Adhesive Anchor Injectable Mortar 500 ml, 2132024

By Hilti

₹3,539   ₹5,434

You save ₹1,895!

34.87% OFF

Injection Mortar are ideal for anchoring structural steel connections (e.g. steel columns, beams), and anchoring secondary steel structures (e.g. racking, guard rails, sound barriers). Our adhesive anchors can be used in concrete and retrofitting reinforced concrete buildings as well as strengthening concrete connections with post-installed rebar.

Add to Cart Buy Now

Ships within 24 hrs

Hilti RE500 V4 (500ML) Injection Mortar

By Hilti

₹14,159  

Injection Mortar are ideal for anchoring structural steel connections (e.g. steel columns, beams), and anchoring secondary steel structures (e.g. racking, guard rails, sound barriers). Our adhesive anchors can be used in concrete and retrofitting reinforced concrete buildings as well as strengthening concrete connections with post-installed rebar.

Add to Cart Buy Now

Ships within 3 days

PIONEER Builder Bond 384 g High Strength Adhesive

By PIONEER

Pack of 24 piece

₹1,887 - ₹6,371

PIONEER Builder Bond is a high-strength, synthetic rubber-based construction adhesive designed for heavy-duty bonding across a wide range of materials. Packaged in a convenient 384 g cartridge, it delivers powerful adhesion for both interior and exterior applications, making it ideal for use on wood, metal, plastics, ceramic tiles, EPS foam, gypsum board, and more. Its thixotropic consistency ensures easy application, even on vertical surfaces, with excellent initial tack and strong green strength. This adhesive provides flexibility, slump resistance, and long-lasting durability, adapting well to material movement without compromising the bond. Once cured, it can be painted over for a neat, professional finish. Whether you're fixing cornices, securing mirrors, bonding door strips, or installing panels, PIONEER Builder Bond offers a reliable and efficient solution for construction and renovation tasks.

Type of Product : High Strength Adhesive

Model No : Builder Bond

Packaging Size : 384 g

Flexibility : Flexible, Non-Drip/Non-Sag Formulation, Eliminating The Need for Screws and Nails.

Tack Free Time : 5-8 Minutes at 24°C-33°C.

Explore other Variants (2)

Related Searches

hilti chemical fixing and mortars

fischer chemical fixing and mortars

selsil acrylic adhesives

Ships within 5 days

Fischer FIS EP 585 S Injection Mortar - 553514

By Fischer

₹3,047  

Fischer 585 ml Epoxy Injection Mortar FIS EP 585 S is a quick-curing job-site grade, mortar mix designed for the repair and restoration of concrete, stone or masonry. It's also used as a waterproofing compound in concrete foundations, subfloors and exterior walls. This epoxy can be used to fill wide gaps up to 12 inches deep. Fischer 585 ml Epoxy Injection Mortar is a two-component, thixotropic, polyamide epoxy injection mortar specifically designed for filling hollow sections of concrete and masonry members. These mortars are waterproof, have a high chemical resistance, and are resistant to acids and alkalies. The mortar can be used as a gap-filling compound as well as a shear transfer system that has been designed to withstand the effects of cyclic loading.
This product comes in 3 different colors: gray, black and brown. It is available in various packaging options, including 528 cm3 plastic containers with one-way valve; 1 liter plastic containers with one-way valve; 2 liter plastic containers with one-way valve; 5 liter plastic containers with one-way valve; 15 liter plastic containers with one-way valve; 30 liter plastic containers with one-way valve; and 454 ml cartridges.
Fischer 585 ml Epoxy Injection Mortar is a polymer modified epoxy injection mortar. It is a high performance mortar for use in concrete, masonry and steel structures to enhance the bond between dissimilar materials. The material resists hydrolysis and chemical attack and has low permeability. Fischer 585 ml Epoxy Injection Mortar offers superior adhesion properties in the presence of organic salts. It is suitable for use where high resistance to corrosion is required or where there are frequent changes in temperature or humidity.

Add to Cart Buy Now

Ships within 3 days

CANDORR Chemical Anchoring Cartridge Pure Epoxy Resin 400 ml, SR500

By CANDORR

₹2,477   ₹2,659

You save ₹182!

6.85% OFF

The CANDORR Chemical Anchoring Cartridge, SR500, is a top-of-the-line solution designed to provide unmatched strength and durability in anchoring applications. With a generous 400 ml capacity, this cartridge contains a high-quality pure epoxy resin, making it a superior choice for critical fastening tasks in construction and industrial settings. The pure epoxy resin formulation of the SR500 cartridge sets it apart, offering exceptional bonding properties that ensure a reliable and long-lasting connection. Epoxy is renowned for its ability to create strong and rigid bonds, making it an ideal choice for applications where structural integrity and load-bearing capacity are paramount. The 400 ml size of the cartridge strikes a balance between providing sufficient material for larger projects and maintaining ease of handling. This capacity is particularly advantageous in scenarios where a significant amount of anchoring material is required for a secure and robust installation. The CANDORR SR500 Chemical Anchoring Cartridge is suitable for a wide range of applications, including securing threaded rods, bolts, and other fixtures into concrete or masonry. Its versatility makes it an essential tool for professionals in the construction and industrial sectors who demand high-performance anchoring solutions. The user-friendly design of the cartridge ensures straightforward and precise application. Compatible with dispensing tools, the SR500 allows for controlled and efficient dispensing of the epoxy resin, ensuring accurate placement and optimal results in every use. In summary, the CANDORR Chemical Anchoring Cartridge, SR500, with its pure epoxy resin formulation, substantial 400 ml capacity, and user-friendly application, stands as a superior choice for professionals seeking unparalleled strength and reliability in their anchoring projects.

Add to Cart Buy Now

Ships within 5 days

Fischer FIS EM PLUS Injection Mortar

By Fischer

₹5,427 - ₹5,663

You save ₹1,924!

25.36% OFF

The Fischer FIS EM Plus Injection Mortar is a high-performance, epoxy-based chemical anchoring system designed for demanding structural applications. It provides exceptional load-bearing capacity and long-term reliability in cracked and non-cracked concrete, natural stone, and reinforcement connections. Formulated with advanced epoxy resin technology, FIS EM Plus ensures superior bond strength, minimal shrinkage, and excellent chemical and temperature resistance, making it suitable for indoor and outdoor installations. The slow-curing formulation allows for precise adjustment and deep embedment of anchor rods or rebar, ensuring maximum stability and safety. Ideal for heavy-duty applications such as steel structures, column bases, industrial machinery, and retrofitting works, it can be used in dry, wet, or water-filled holes. Its cartridge system allows for clean, controlled dispensing and easy application with standard injection tools. The Fischer FIS EM Plus Injection Mortar represents durability, strength, and professional reliability for critical anchoring and rebar connections in modern construction.

Type of Product : Injectable Mortar

Suitable For : Concrete C20/25 to C50/60, cracked and non-cracked

Packaging Type : Cartridge

Application : Post-installed rebar connections, Jointers for concrete layers, Rim beam anchorings, Seismic applications

Language : DE, EN, FR, NL, ES, PT

Approval : DIBt, ETA

Explore other Variants (2)

Ships within 5 days

LOCTITE AA 352 Light Cure Adhesive

By LOCTITE

₹2,477 - ₹7,905

Loctite AA 352 Light Cure Adhesive represents an advanced solution for rapid bonding and fixing of components in industrial, automotive, and manufacturing applications. Renowned for its exceptional strength, reliability, and versatility, this adhesive offers a reliable solution for bonding a wide range of substrates, including metals, plastics, glass, and ceramics. At the core of its effectiveness lies its advanced formulation, meticulously engineered to provide rapid bonding under UV or visible light. Loctite AA 352 cures rapidly when exposed to light, allowing for fast assembly and minimizing downtime in production processes. One of the key features of Loctite AA 352 is its versatility and ease of use. Its low viscosity ensures easy dispensing and penetration into tight spaces, while its rapid curing time allows for quick assembly and minimal fixture time. This makes it suitable for both manual and automated assembly processes, enhancing productivity and efficiency in manufacturing operations. Loctite AA 352 is characterized by its high shear and peel strength, providing reliable bonding solutions for a wide range of applications, from bonding metal brackets in automotive assemblies to bonding plastic components in electronics. Its excellent gap-filling properties make it ideal for bonding uneven or irregular surfaces, ensuring uniform adhesion and maximizing bond strength. Furthermore, Loctite AA 352 exhibits excellent resistance to moisture, chemicals, and temperature extremes, ensuring long-term durability and reliability in harsh environments. This resistance enhances the longevity of bonded assemblies, reducing the need for frequent maintenance or reapplication.

Type of Product : Light Cure Adhesive

Model No : LOCTITE AA 352

Explore other Variants (2)

Ships within 3 days

Stanvac Firex EC 43 5 Kg Grey Fire Radiant Paint

By Stanvac

Pack of 5 kilogram

₹10,029  

Stanvac Firex EC 43 5 Kg Grey Fire Radiant Paint is a high-performance, fire-resistant coating designed to provide superior protection against heat and fire hazards. This specially formulated paint is ideal for application on steel structures, walls, ceilings, and other surfaces exposed to extreme temperatures. The grey finish offers a clean and professional appearance, while the paint's unique radiant heat barrier ensures that surfaces remain cool even under intense fire conditions, making it suitable for both industrial and commercial environments.The 5 kg container provides sufficient coverage for larger projects, making it perfect for contractors and maintenance teams. Once applied, the Stanvac Firex EC 43 forms a durable, long-lasting protective layer that enhances fire safety by reducing heat transfer and minimizing the risk of fire spreading. It is highly resistant to high temperatures and can withstand the effects of constant exposure to radiant heat, ensuring the integrity of structural components over time. With its easy application, exceptional durability, and reliable performance, this fire radiant paint is an essential choice for enhancing fire protection and safety in any setting.

Add to Cart Buy Now

Ships within 4 days

Soudal 290 ml White Fix All High Tack Bonding and Construction Adhesive, 524 (Pack of 24 Pcs)

By Soudal

Pack of 24 piece

₹14,159  

The Soudal 290 ml White Fix All High Tack Bonding and Construction Adhesive is a high-performance adhesive solution designed for demanding bonding and construction applications. Each tube contains 290 milliliters of this powerful adhesive, and it is available in a pack of 24 tubes, providing ample supply for both large-scale projects and regular use. The white color of the adhesive offers a clean, professional finish that is aesthetically pleasing and versatile for various construction and repair tasks.
This adhesive is formulated to deliver superior bonding strength to a wide range of substrates, including wood, metal, concrete, masonry, and plastics. The high tack formulation ensures an immediate, strong grip upon application, which is essential for both vertical and horizontal surfaces. This initial grab is particularly useful for ensuring materials stay in place during the curing process, reducing the need for additional support or clamping.
Durability is a key feature of this Fix All adhesive. It is engineered to withstand various environmental conditions, including exposure to moisture, UV rays, and temperature fluctuations. This resilience makes it suitable for both indoor and outdoor applications, where it maintains its strength and performance over time without peeling, cracking, or degrading.
The adhesive also offers ease of application. Its smooth, workable consistency allows for precise application and a professional finish with minimal effort. The quick curing time facilitates faster project completion, reducing overall waiting times and allowing users to move on to subsequent tasks more efficiently.
In summary, the Soudal 290 ml White Fix All High Tack Bonding and Construction Adhesive combines exceptional bonding strength, durability, and ease of use, making it an ideal choice for a wide range of construction and repair tasks. The pack of 24 tubes ensures a practical and economical solution for extensive projects or regular maintenance needs.

Add to Cart Buy Now

Ships within 4 days

PIONEER Builders Bond Construction Adhesive

By PIONEER

Pack of 24 piece

₹6,725 - ₹6,725

PIONEER Builders Bond Construction Adhesive is a high-performance, rubber-based adhesive formulated for strong, long-lasting bonds in demanding construction applications. It is ideal for securing materials like wood, metal, plastic, ceramic tiles, gypsum board, and foam panels. The thick, non-sag consistency allows for clean and precise vertical or overhead application, making it perfect for both interior and exterior projects. With excellent initial tack and strong bonding power, this adhesive reduces or eliminates the need for screws and nails. Its flexibility allows it to withstand structural movement, while the cured adhesive can be painted over for a smooth, professional finish. Whether used for panel installation, decorative elements, or general repairs, PIONEER Builders Bond delivers reliable performance in every project.

Suitable For : Bonds Wood, Concrete, Cement Board, Metals, Masonry, Ceramics And Glass

Shelf Life : 12 Months

Type of Product : Construction Adhesive

Packaging Type : Cartridge

Model Name : Builders Bond

Working Time : 5-6 Hours

Item Form : Liquid

Explore other Variants (1)

Ships within 5 days

Fischer FIS EB 390 S Injection Mortar - 534984

By Fischer

₹4,011  

Fischer's EB 390 S is a flexible, solvent-free, cold curing epoxy injection mortar designed to fill voids and cracks in machinery and equipment. The fast setting epoxy injection mortar is easy to use and cures quickly at room temperature. Fischer EB 390 S is suitable for filling cavities in motors, compressors, pumps and fans. When it comes to the construction of heavy steel constructions, consoles, silo installations and tall shelving, there are very few products that can live up to the function and performance of FIS EB 390 S Injection Mortar Epoxy Injection Mortar. This high-performance product allows for concrete repairs from C20/20 to C50/60, cracks and non-cracked. The product was developed based on a special, patented formula and is available in a range of delivery systems, including cartridges, which makes it extremely easy to transport and handle. FIS EB 390 S is highly flexible and can be used in various situations that require high tensile strength or brittle resistance. It's also resistant to chemicals and has low shrinkage for optimal results. When combined with FIS MR Plus Concrete C20/20 to C50/60, cracks and non-cracked it can provide a long-lasting solution for all your injection mortar needs.

Add to Cart Buy Now

Ships within 3 days

Opti Construction Adhesive Optibond Nailfree Cartridge 390 g

By Opti

Pack of 24 piece

₹282 - ₹5,663

The Opti Construction Adhesive Optibond Nailfree Cartridge, a premium solution from the renowned brand Opti in the Acrylic Adhesives category. This 390g cartridge is designed for high-strength bonding applications, eliminating the need for nails or screws. Its solvent-resistant formulation ensures durability and longevity, making it ideal for industrial-grade projects. Whether you're working with metal, ACP sheets, or aluminum, this adhesive provides a reliable and efficient bonding experience. Manufactured in India by Hamsons Trading, the product adheres to industrial-grade standards, ensuring quality and performance. The Opti Construction Adhesive Optibond Nailfree Cartridge comes in a convenient cartridge packaging, allowing for easy application and minimal waste. Its high-strength formula is particularly suited for applications in the ACP sheet and aluminum industries, where strong and lasting bonds are crucial. The adhesive's solvent resistance adds an extra layer of reliability, ensuring that bonded materials withstand various environmental factors. As a product under the trusted Opti brand, it guarantees consistency and excellence in every application.

Size : 390 g

Type of Product : Construction Adhesive Optibond Nailfree Cartridge

Packaging Type : Cartridge

Grade Standard : Industrial

Usage/Application : Metal

Strength : High

Application Industry : ACP Sheet, aluminium

Chemical Resistant : Solvent

Explore other Variants (2)

Ships within 3 days

Soudal 390 g Crème Superbond Mirror Ashesive, 502 (Pack of 24 Pcs)

By Soudal

Pack of 24 piece

₹5,545  

Soudal's 390 g Crème Superbond Mirror Adhesive, available in a pack of 24 pieces, stands out as an exceptional solution for professionals and enthusiasts in need of a high-quality adhesive tailored specifically for mirror installations. This product reflects Soudal's dedication to providing innovative and reliable adhesive solutions that meet the demanding requirements of the construction and design industry.
The 390 g size of the Crème Superbond Mirror Adhesive offers a substantial quantity for multiple mirror installation projects, catering to both large-scale construction endeavors and smaller individual installations. The ample supply ensures that users have a sufficient quantity to complete various projects without interruption, while the crème color complements the installation of mirrors, creating an aesthetically appealing final finish.
At the core of the Crème Superbond Mirror Adhesive's effectiveness is its advanced formulation, specifically designed to provide exceptional adhesion and support for mirror installations. This adhesive offers a high bond strength, ensuring that mirrors remain securely in place even in challenging conditions, contributing to the structural integrity and longevity of the installation. Its formulation allows for precise and controlled application, crucial for achieving accurate and stable mirror placements.
Furthermore, the Crème Superbond Mirror Adhesive exhibits excellent resistance to environmental factors such as moisture, temperature variations, and vibrations, ensuring that the mirrors remain firmly attached and stable over time. The adhesive's resistance to the aging effects of UV radiation and chemicals further adds to its reliability, making it suitable for both interior and exterior mirror installations.
The pack of 24 pieces provides users with a consistent supply of this premium adhesive, offering convenience and cost-effectiveness for various mirror projects. Additionally, the multipack provision ensures that users have an ample stock of this reliable adhesive, allowing for efficient completion of projects without the need for frequent restocking.
In summary, Soudal's 390 g Crème Superbond Mirror Adhesive, available in a pack of 24 pieces, embodies excellence in adhesive solutions tailored for mirror installations. Its advanced formulation, high adhesion strength, and resistance to environmental challenges, combined with the convenience of a multipack, position it as a top choice for professionals and enthusiasts seeking reliable and high-performance adhesive for a wide range of mirror installation projects.

Add to Cart Buy Now

Ships within 5 days

Fischer Injection Mortar FIS EM 390 S

By Fischer

₹3,775   ₹4,720

You save ₹945!

20.02% OFF

The powerful injection mortar for rebar connections and cracked concrete.
Building Material:
Approved for anchorings in: Concrete C20/25 to C50/60, cracked and non-cracked
Also suitable for: Natural stone with dense structure
Advantages:
High bond strengths and minor mortar shrinkage allow maximum load application in cracked and non-cracked concrete, even with large threaded rod diameters of up to M30.
Variable anchorage depths from 4x to 20x the threaded rod diameter allow for ideal adaptation to the load to be applied, and ensure an optimised installation time and use of materials.
FIS EM is also approved for diamond-drilled and water-filled drill holes, thus ensuring more flexibility on the construction site.
The Epoxy mortar FIS EM is approved for seismic applications C1, C2, which ensures safety even under extreme conditions.
Applications:
Heavy steel constructions
Silo installations
Tall shelving
Sound barriers
Jointers for concrete layers
Rim beam anchorings
Anchorings in diamond-drilled drill holes
Fixings in waterfilled drill holes
Seismic applications
Functioning:
The injection system, comprising the epoxy resin mortar FIS EM combined with the FIS A threaded rod, is suitable for pre-positioned and push-through installation.
Resin and hardener are stored in two separate chambers and are not mixed and activated until extrusion through the injection capsule in the static mixer.
The mortar is injected bubble-free from the drill hole base.
The mortar bonds the entire surface of the anchor rod with the drill hole wall and seals off the drill hole.
The anchor rod is set manually by lightly rotating it until it reaches the drill hole base.
During push-through installation, the annular gap between the anchor rod and attachment is filled with FIS EM.

Add to Cart Buy Now

Ships within 5 days

Fischer FIS SB 585 S Injection Mortar - 519452

By Fischer

₹5,339  

Fischer 585 ml Injection Mortar FIS SB 585 S is a high-grade, fast-setting mortar, tested for use as an injection mortar in small openings. It provides excellent binding strength and its elasticity ensures optimum conformity of the two facing materials. This product is designed for the single batch mixing of lightweight decorative mortars. It combines good workability with outstanding handling properties during application. Fischer 585 ml Injection Mortar is a two-component, thixotropic, polyamide injection mortar specifically designed for filling hollow sections of concrete and masonry members. These mortars are waterproof, have a high chemical resistance, and are resistant to acids and alkalies. The mortar can be used as a gap-filling compound as well as a shear transfer system that has been designed to withstand the effects of cyclic loading.
This product comes in 3 different colors: gray, black and brown. It is available in various packaging options, including 528 cm3 plastic containers with one-way valve; 1 liter plastic containers with one-way valve; 2 liter plastic containers with one-way valve; 5 liter plastic containers with one-way valve; 15 liter plastic containers with one-way valve; 30 liter plastic containers with one-way valve; and 454 ml cartridges.
Fischer 585 ml Injection Mortar is a polymer modified injection mortar. It is a high performance mortar for use in concrete, masonry and steel structures to enhance the bond between dissimilar materials. The material resists hydrolysis and chemical attack and has low permeability. Fischer 585 ml Injection Mortar offers superior adhesion properties in the presence of organic salts. It is suitable for use where high resistance to corrosion is required or where there are frequent changes in temperature or humidity.

Add to Cart Buy Now

Ships within 5 days

LOCTITE HY 4090 Hybrid Adhesives

By LOCTITE

₹2,241 - ₹10,855

Loctite HY 4090 Hybrid Adhesive represents a cutting-edge solution in the realm of bonding technology, fusing the benefits of cyanoacrylate and epoxy adhesives into one versatile product. Renowned for its exceptional strength, durability, and versatility, this hybrid adhesive offers a reliable bonding solution for a diverse range of substrates and applications in industrial, automotive, and manufacturing sectors. At the heart of its effectiveness lies its innovative hybrid formulation, meticulously engineered to deliver superior bonding performance across various materials, including metals, plastics, composites, and rubbers. Loctite HY 4090 combines the rapid curing speed of cyanoacrylate adhesives with the high strength and toughness of epoxy adhesives, resulting in robust bonds that withstand impact, vibration, and thermal cycling. One of the standout features of Loctite HY 4090 is its versatility and ease of use. Its low viscosity ensures easy dispensing and penetration into tight spaces, while its extended open time allows for precise positioning of parts before curing. This makes it suitable for both manual and automated assembly processes, enhancing productivity and efficiency in manufacturing operations.

Type of Product : Hybrid Adhesives

Model No : LOCTITE HY 4090

Explore other Variants (2)

Ships within 5 days

Fischer Injection Mortar FIS EM 585 S

By Fischer

₹4,837   ₹5,900

You save ₹1,063!

18.02% OFF

The powerful injection mortar for rebar connections and cracked concrete.
Building Material:
Approved for anchorings in: Concrete C20/25 to C50/60, cracked and non-cracked
Also suitable for: Natural stone with dense structure
Advantages:
High bond strengths and minor mortar shrinkage allow maximum load application in cracked and non-cracked concrete, even with large threaded rod diameters of up to M30.
Variable anchorage depths from 4x to 20x the threaded rod diameter allow for ideal adaptation to the load to be applied, and ensure an optimised installation time and use of materials.
FIS EM is also approved for diamond-drilled and water-filled drill holes, thus ensuring more flexibility on the construction site.
The Epoxy mortar FIS EM is approved for seismic applications C1, C2, which ensures safety even under extreme conditions.
Applications:
Heavy steel constructions
Silo installations
Tall shelving
Sound barriers
Jointers for concrete layers
Rim beam anchorings
Anchorings in diamond-drilled drill holes
Fixings in waterfilled drill holes
Seismic applications
Functioning:
The injection system, comprising the epoxy resin mortar FIS EM combined with the FIS A threaded rod, is suitable for pre-positioned and push-through installation.
Resin and hardener are stored in two separate chambers and are not mixed and activated until extrusion through the injection capsule in the static mixer.
The mortar is injected bubble-free from the drill hole base.
The mortar bonds the entire surface of the anchor rod with the drill hole wall and seals off the drill hole.
The anchor rod is set manually by lightly rotating it until it reaches the drill hole base.
During push-through installation, the annular gap between the anchor rod and attachment is filled with FIS EM.

Add to Cart Buy Now

Ships within 4 days

Polygum 60 Kg Extrabonding Adhesive for Heavy Duty Furnitures, 50-55 sq.ft/Kg Coverage and 200-300 Poise Viscosity

By Polygum

Pack of 60 kilogram

₹11,091  

Polygum 60 Kg Extrabonding Adhesive for Heavy Duty Furnitures, 50-55 sq.ft/Kg Coverage and 200-300 Poise Viscosity is formulated for demanding structural bonding applications. The higher viscosity range of 200-300 poise enhances gap-filling capability and film build, supporting strong interfacial cohesion in heavy-duty assemblies. With coverage of 50-55 sq.ft per kilogram, it balances strength and application efficiency. Polygum 60 Kg Extrabonding Adhesive for Heavy Duty Furnitures, 50-55 sq.ft/Kg Coverage and 200-300 Poise Viscosity is suitable for load-bearing furniture, thick laminates, and engineered wood constructions. The robust adhesive matrix ensures high bond integrity under mechanical stress and routine operational loads. Designed for industrial woodworking units, it delivers dependable curing characteristics and sustained adhesion performance in structurally intensive applications.

Add to Cart Buy Now

Ships within 3 days

LOCTITE AA 326 Fast Fixture Structural Adhesive

By LOCTITE

₹1,533 - ₹9,675

Loctite 326 Fast Fixture Structural Adhesive is a high-performance adhesive engineered for rapid bonding and fixing of components in industrial, automotive, and manufacturing applications. Renowned for its exceptional strength, reliability, and versatility, this adhesive offers a reliable solution for bonding a wide range of substrates, including metals, plastics, composites, and ceramics. At the core of its effectiveness lies its advanced formulation, meticulously engineered to provide rapid bonding and fixture times while delivering robust and durable bonds. Loctite 326 cures rapidly under UV light or visible light, allowing for fast assembly and minimizing downtime in production processes. One of the key features of Loctite 326 is its versatility and ease of use. Its low viscosity ensures easy dispensing and penetration into tight spaces, while its rapid curing time allows for quick assembly and minimal fixture time. This makes it suitable for both manual and automated assembly processes, enhancing productivity and efficiency in manufacturing operations. Loctite 326 is characterized by its high shear and peel strength, providing reliable bonding solutions for a wide range of applications, from bonding metal brackets in automotive assemblies to bonding plastic components in electronics. Its excellent gap-filling properties make it ideal for bonding uneven or irregular surfaces, ensuring uniform adhesion and maximizing bond strength.

Type of Product : Fast Fixture Structural Adhesive

Model No : LOCTITE AA 326

Explore other Variants (2)

Ships within 3 days

Selsil 23 Exterior Acrylic Polymer White 450 g (Pack of 25)

By Selsil

Pack of 25 piece

₹3,539  

Selsil 23 Exterior Acrylic Polymer White 450 g is a top-quality sealing solution designed for a variety of outdoor applications. This durable acrylic polymer is ideal for sealing and bonding materials such as wood, metal, and masonry, providing a reliable barrier against the elements. With excellent resistance to UV rays, moisture, and weathering, it is perfect for projects that require long-lasting performance in exterior settings. Each 450 g tube offers sufficient product for efficient application, making it a practical choice for both professional and DIY use.This pack of 25 ensures that you have an ample supply of Selsil 23 to tackle larger projects or multiple smaller tasks. The white formulation provides a clean and professional finish that integrates seamlessly with various surfaces, enhancing the aesthetic appeal of your work. With quick-drying properties, this acrylic polymer allows for rapid completion without compromising quality. Once cured, it forms a flexible and waterproof seal that withstands cracking and peeling over time. Whether you're involved in maintenance, renovations, or new constructions, Selsil 23 offers the durability and versatility needed to protect and enhance your outdoor projects, ensuring lasting results and satisfaction.

Add to Cart Buy Now

Ships within 3 days

Selsil 20 Interior Acrylic Polymer White 500 g for Aluminium, Glass, Metal (Pack of 25)

By Selsil

Pack of 25 piece

₹3,303  

Selsil 20 500 g Interior Silicone Polymer is a high-quality sealing solution designed specifically for interior applications involving aluminum, glass, glazed ceramic, and metal surfaces. This versatile silicone polymer offers exceptional adhesion and flexibility, making it ideal for a variety of projects, from sealing joints and gaps to bonding materials securely. Each 500 g tube provides a substantial amount of product, ensuring you have enough to complete multiple tasks efficiently.This pack of 25 is perfect for contractors, builders, or DIY enthusiasts looking for a reliable sealing solution. Selsil 20 is formulated to resist moisture, making it suitable for wet environments such as kitchens and bathrooms. Its clear finish allows for seamless integration with various surfaces, maintaining the aesthetic appeal of your projects. The silicone polymer cures to form a durable, waterproof seal that remains flexible over time, preventing cracking or shrinkage. Whether you’re working on renovations or new constructions, Selsil 20 delivers long-lasting performance and versatility, ensuring that your sealing needs are met with quality and reliability.

Add to Cart Buy Now

Ships within 3 days

Selsil 20 Interior 500 g Brown Acrylic Polymer (Pack of 25)

By Selsil

Pack of 25 piece

₹3,657  

Selsil 20 Interior 500 g Brown Acrylic Polymer (Pack of 25) is a premium-quality coating designed for interior applications, offering both protective and aesthetic benefits. This versatile Brown acrylic polymer is perfect for use on a variety of indoor surfaces such as walls, ceilings, wood, and concrete. It provides excellent adhesion and creates a smooth, durable finish that resists wear and tear. Ideal for areas exposed to frequent use or moisture, Selsil 20 helps protect against staining, dirt accumulation, and minor impacts while maintaining a fresh and attractive appearance.Packaged in 500 g cans, this pack of six ensures sufficient coverage for multiple rooms or projects, making it a cost-effective solution for contractors and DIY enthusiasts. The polymer is easy to apply, dries quickly, and forms a flexible, long-lasting protective layer. Its Brown color offers a sleek, modern look that is perfect for both functional and decorative purposes in homes, offices, or commercial spaces. Whether you're looking to enhance the appearance of your interior surfaces or protect them from everyday wear, Selsil 20 Interior Acrylic Polymer guarantees reliable, high-quality results.

Add to Cart Buy Now

Ships within 3 days

Selsil 20 Interior 500 g Black Acrylic Polymer (Pack of 25)

By Selsil

Pack of 25 piece

₹3,303  

Selsil 20 Interior 500 g Black Acrylic Polymer (Pack of 25) is a premium-quality coating designed for interior applications, offering both protective and aesthetic benefits. This versatile black acrylic polymer is perfect for use on a variety of indoor surfaces such as walls, ceilings, wood, and concrete. It provides excellent adhesion and creates a smooth, durable finish that resists wear and tear. Ideal for areas exposed to frequent use or moisture, Selsil 20 helps protect against staining, dirt accumulation, and minor impacts while maintaining a fresh and attractive appearance.Packaged in 500 g cans, this pack of six ensures sufficient coverage for multiple rooms or projects, making it a cost-effective solution for contractors and DIY enthusiasts. The polymer is easy to apply, dries quickly, and forms a flexible, long-lasting protective layer. Its black color offers a sleek, modern look that is perfect for both functional and decorative purposes in homes, offices, or commercial spaces. Whether you're looking to enhance the appearance of your interior surfaces or protect them from everyday wear, Selsil 20 Interior Acrylic Polymer guarantees reliable, high-quality results.

Add to Cart Buy Now

Ships within 3 days

Selsil 23 Exterior 450 g Black Acrylic Polymer (Pack of 25)

By Selsil

Pack of 25 piece

₹3,539  

Selsil 23 Exterior 450 g Black Acrylic Polymer (Pack of 25) is a high-performance coating designed to provide exceptional durability and protection for a variety of outdoor surfaces. This black acrylic polymer is ideal for exterior applications, offering excellent adhesion to surfaces like concrete, wood, metal, and brick. Its weather-resistant properties ensure long-lasting performance, protecting surfaces from UV rays, moisture, and extreme temperatures. The Selsil 23 is perfect for sealing, waterproofing, and enhancing the aesthetics of outdoor spaces, including roofs, facades, and other exposed areas.Each 450 g can in this pack of six offers ample coverage for large-scale projects, making it an ideal solution for contractors and maintenance professionals. The black finish provides a clean and uniform appearance, while the polymer's flexibility allows it to expand and contract with temperature changes, preventing cracking or peeling over time. Whether used for decorative or protective purposes, Selsil 23 Exterior Acrylic Polymer ensures high-quality results with excellent resistance to environmental factors. Its versatile application and reliable performance make it an essential choice for any outdoor sealing or waterproofing needs.

Add to Cart Buy Now

Ships within 10 days

LOCTITE AA 324 High Impact Structural Adhesive

By LOCTITE

Bottle of 250 ml

₹1,415 - ₹6,253

Loctite AA 324 Fast Fixture Structural Adhesive stands out as a high-performance adhesive designed for rapid bonding and fixing of components in industrial, automotive, and manufacturing applications. Renowned for its exceptional strength, reliability, and versatility, this adhesive offers a reliable solution for bonding a wide range of substrates, including metals, plastics, composites, and ceramics. At the core of its effectiveness lies its advanced formulation, engineered to provide rapid bonding and fixture times while delivering robust and durable bonds. Loctite AA 324 cures quickly under UV light or visible light, allowing for fast assembly and minimizing downtime in production processes. One of the key features of Loctite AA 324 is its versatility and ease of use. Its low viscosity ensures easy dispensing and penetration into tight spaces, while its rapid curing time allows for quick assembly and minimal fixture time. This makes it suitable for both manual and automated assembly processes, enhancing productivity and efficiency in manufacturing operations.

Physical Form : Liquid

Type of Product : High Impact Structural Adhesive

Model No : LOCTITE AA 324

Cure Type : Room Temperature (Ambient) Cure

Explore other Variants (2)

Ships within 12 days

Hilti Hit-RE 500 V4 Epoxy Anchor Injectable Mortar

By Hilti

₹9,557 - ₹12,979

The Hilti Hit-RE 500 V4 Epoxy Anchor Injectable Mortar is a high-performance anchoring solution designed for heavy-duty applications in concrete and masonry. This injectable mortar is part of Hilti's renowned HIT-RE 500 system, known for its reliability and strength. The V4 formulation ensures enhanced performance, making it suitable for critical anchoring situations where high load capacity and durability are required. This epoxy anchor mortar offers easy and convenient application, thanks to its injectable format. It can be used with standard dispensing tools, making installation quick and efficient. The mortar cures to form a strong bond with the base material, providing reliable anchoring for structural elements such as columns, beams, and equipment. Its high bond strength and resistance to environmental conditions make it ideal for both indoor and outdoor applications. The Hilti Hit-RE 500 V4 Epoxy Anchor Injectable Mortar is suitable for use in a wide range of temperatures, making it versatile for various construction projects. It complies with the latest international standards for anchoring performance, ensuring that it meets the requirements for safety and reliability. Whether used in new construction or retrofitting existing structures, this epoxy anchor mortar provides a durable and dependable anchoring solution.

Type of Product : Injectable Mortar

Base Material : Non-cracked and Cracked Concrete

Compatible Surface : Dry, Wet

PROFIS Software : Yes

Package Contains : 1x Foil Pack, 2x Mixer, 1x Mixer Extension

Storage Temperature Range : 5 - 25 °C

Working temperature range : -40 - 75 °C

Approvals : ETA, Fire

Cleaning procedures : Automatic cleaning (SafeSet hollow drill bit), Compressed-air cleaning, Manual cleaning

Explore other Variants (2)

Ships within 12 days

Hilti Hit-HY 200-R V3 Adhesive Anchor Injectable Mortar

By Hilti

₹7,905 - ₹10,029

The Hilti Hit-HY 200-R V3 Adhesive Anchor Injectable Mortar is a high-performance anchoring solution designed for a wide range of applications in concrete and masonry structures. This advanced mortar offers exceptional strength and reliability, making it ideal for demanding construction projects where structural integrity is paramount. The Hit-HY 200-R V3 features a hybrid mortar formulation that combines the benefits of both epoxy and cementitious mortars. This results in a versatile adhesive that offers excellent load-bearing capacity and durability, even in challenging conditions. One of the key features of the Hit-HY 200-R V3 is its ease of use. The mortar comes in a convenient cartridge that can be easily dispensed using a standard caulking gun, making installation quick and efficient. Once dispensed, the mortar has a long open time, allowing for precise placement of anchors before it sets. The Hit-HY 200-R V3 is also designed with safety in mind. It is solvent-free and has a low odor, making it safe to use in enclosed or poorly ventilated areas. Additionally, the mortar is ETA-approved for use in seismic conditions, providing added assurance of its reliability and performance.

Type of Product : Injectable Mortar

Color : Red, White

Base Material : Non-cracked and Cracked Concrete

Compatible Surface : Dry, Wet

PROFIS Software : Yes

Package Contains : 1x Foil Pack, 2x Mixer, 1x Mixer Extension

Class : Ultimate

Storage Temperature Range : 5 - 25 °C

Working temperature range : -40 - 120 °C

Approvals : ETA, ICC-ES report (concrete)

Cleaning procedures : Compressed-Air Cleaning, Manual Cleaning

Explore other Variants (2)

Ships within 12 days

Hilti HIT-RE 100 Epoxy Anchor Injectable Mortar 500 ml, 2123386

By Hilti

₹7,304  

Hilti Injectable Mortar emerges as an economical and versatile solution, poised to replace a wide range of grout fastenings in diverse construction applications. This innovative mortar solution, developed by Hilti, reflects the brand's commitment to providing efficient and reliable construction materials. Designed to offer a cost-effective alternative to traditional grouting methods, this injectable mortar is particularly advantageous for post-installed rebar and concrete anchoring applications, aligning seamlessly with Hilti's technical data and specifications. The versatility of Hilti's Injectable Mortar is a key highlight, as it caters to a spectrum of construction needs, making it a valuable resource for professionals across the industry. The formulation of the mortar is engineered to meet the stringent requirements of post-installed rebar and concrete anchoring, ensuring a secure and durable connection in various structural elements. This solution's economic advantages extend beyond its initial cost-effectiveness. By providing a reliable alternative to conventional grout fastenings, Hilti Injectable Mortar contributes to enhanced efficiency in construction projects. The streamlined injection process minimizes installation time, offering a practical solution for time-sensitive projects without compromising on the integrity of the anchoring application. Moreover, the compatibility of this injectable mortar with Hilti's technical data underscores its reliability and compliance with industry standards. Professionals can confidently rely on Hilti Injectable Mortar for its efficacy in post-installed rebar and concrete anchoring, recognizing it as a dependable and economical choice in the ever-evolving landscape of construction materials.

Add to Cart Buy Now

Ships within 12 days

Hilti HIT-MM PLUS Adhesive Anchor Injectable Mortar 330 ml Cartridge, 2031079

By Hilti

₹2,938  

Hilti Injectable Mortar emerges as an economical and versatile solution, poised to replace a wide range of grout fastenings in diverse construction applications. This innovative mortar solution, developed by Hilti, reflects the brand's commitment to providing efficient and reliable construction materials. Designed to offer a cost-effective alternative to traditional grouting methods, this injectable mortar is particularly advantageous for post-installed rebar and concrete anchoring applications, aligning seamlessly with Hilti's technical data and specifications. The versatility of Hilti's Injectable Mortar is a key highlight, as it caters to a spectrum of construction needs, making it a valuable resource for professionals across the industry. The formulation of the mortar is engineered to meet the stringent requirements of post-installed rebar and concrete anchoring, ensuring a secure and durable connection in various structural elements. This solution's economic advantages extend beyond its initial cost-effectiveness. By providing a reliable alternative to conventional grout fastenings, Hilti Injectable Mortar contributes to enhanced efficiency in construction projects. The streamlined injection process minimizes installation time, offering a practical solution for time-sensitive projects without compromising on the integrity of the anchoring application. Moreover, the compatibility of this injectable mortar with Hilti's technical data underscores its reliability and compliance with industry standards. Professionals can confidently rely on Hilti Injectable Mortar for its efficacy in post-installed rebar and concrete anchoring, recognizing it as a dependable and economical choice in the ever-evolving landscape of construction materials.

Add to Cart Buy Now

Ships within 12 days

Hilti Adhesive Anchor ETA, ICC-ES Report (Concrete), 2222131 (Pack of 5)

By Hilti

Pack of 5 piece

₹5,073   ₹5,799

You save ₹726!

12.52% OFF

The Hilti Adhesive Anchor (2222131) is a high-performance bonding solution designed for structural anchoring in concrete. With ETA and ICC-ES certification, this adhesive anchor meets international safety and reliability standards, ensuring secure and long-lasting fastening in both cracked and uncracked concrete. It provides high load-bearing capacity, making it ideal for heavy-duty applications such as structural reinforcements, seismic upgrades, and industrial installations.

Add to Cart Buy Now

Ships within 12 days

Hilti HIT-HY 270 Adhesive Anchor Injectable Mortar 330 ml Cartridge, 2095982

By Hilti

₹6,691  

Hilti Injectable Mortar emerges as an economical and versatile solution, poised to replace a wide range of grout fastenings in diverse construction applications. This innovative mortar solution, developed by Hilti, reflects the brand's commitment to providing efficient and reliable construction materials. Designed to offer a cost-effective alternative to traditional grouting methods, this injectable mortar is particularly advantageous for post-installed rebar and concrete anchoring applications, aligning seamlessly with Hilti's technical data and specifications. The versatility of Hilti's Injectable Mortar is a key highlight, as it caters to a spectrum of construction needs, making it a valuable resource for professionals across the industry. The formulation of the mortar is engineered to meet the stringent requirements of post-installed rebar and concrete anchoring, ensuring a secure and durable connection in various structural elements. This solution's economic advantages extend beyond its initial cost-effectiveness. By providing a reliable alternative to conventional grout fastenings, Hilti Injectable Mortar contributes to enhanced efficiency in construction projects. The streamlined injection process minimizes installation time, offering a practical solution for time-sensitive projects without compromising on the integrity of the anchoring application. Moreover, the compatibility of this injectable mortar with Hilti's technical data underscores its reliability and compliance with industry standards. Professionals can confidently rely on Hilti Injectable Mortar for its efficacy in post-installed rebar and concrete anchoring, recognizing it as a dependable and economical choice in the ever-evolving landscape of construction materials.

Add to Cart Buy Now

Ships within 12 days

Hilti Stone Undercut Anchor Stainless Steel, A4 Externally Threaded, 2179728 (Pack of 5)

By Hilti

Pack of 5 piece

₹5,073   ₹5,889

You save ₹816!

13.86% OFF

The Hilti Stone Undercut Anchor (model 2179728) is a high-performance fixing solution specifically designed for use in stone materials. Made from stainless steel A4, this anchor provides excellent resistance to corrosion, ensuring longevity and reliability even in harsh environments. Its externally threaded design allows for easy installation and secure fastening, making it ideal for applications where a strong and durable hold is needed.

Add to Cart Buy Now

Ships within 30 days

Fischer Epoxy Mortar Construction Rebar Chemical For Concrete C20/25, Cracked & Non-Cracked, EB585

By Fischer

₹3,893  

The Flycutor Fly Killer 50 W Power 800 Sq.ft. Coverage Area High-Voltage Electric Grid System 6.16 Kg, FC220W is an efficient and reliable solution for maintaining a hygienic environment in homes, shops, restaurants, and commercial spaces. Designed to cover up to 800 sq. ft., this electric fly killer uses a powerful high-voltage grid system to instantly eliminate flying insects. Its 50 W power rating ensures consistent performance, while the sturdy construction enhances durability for long-term use. The sleek and professional design blends easily into indoor settings without causing disturbance.
Built for convenience and safety, the Flycutor Fly Killer 50 W Power 800 Sq.ft. Coverage Area High-Voltage Electric Grid System 6.16 Kg, FC220W operates silently and requires minimal maintenance. The optimized grid spacing improves effectiveness while reducing energy consumption. With a balanced weight of 6.16 kg, it offers stable mounting and dependable operation. Ideal for maintaining cleanliness and comfort, this Flycutor insect control device supports a healthier, insect-free environment with dependable results.

Add to Cart Buy Now

Ships within 30 days

Fischer Injection Mortar DE, EN, IT Language 360 Scale Unit, FIS RC II 360 S

By Fischer

₹3,688  

The Fischer Injection Mortar DE, EN, IT Language 360 Scale Unit, FIS RC II 360 S is a high-performance bonding solution designed for secure and durable anchoring in demanding environments. This injection mortar is ideal for use in concrete, brick, and masonry, providing reliable and strong adhesion for anchoring rods, bars, and other fixings. With a 360 ml scale unit, it ensures efficient and controlled application, making it perfect for both small and large construction projects that require precise results.Engineered by the trusted Fischer brand, the Fischer Injection Mortar FIS RC II 360 S offers superior resistance to moisture, chemicals, and temperature fluctuations, ensuring a lasting hold in various conditions. Whether you’re working on structural reinforcement, renovation, or installation tasks, this mortar delivers outstanding reliability and performance. It’s an essential solution for professionals who demand a high-quality, efficient product for their anchoring and fixing needs.

Add to Cart Buy Now

Ships within 30 days

Fischer Injection Mortar, FIS EB

By Fischer

₹3,893 - ₹5,781

The Fischer Injection Mortar FIS EB is a high-quality, epoxy-based chemical anchoring system designed for strong and reliable fixings in concrete, solid masonry, and natural stone. Formulated for heavy-duty applications, it provides exceptional bond strength, durability, and resistance to chemical and environmental influences. The two-component epoxy resin ensures precise mixing and consistent curing, resulting in a high load-bearing connection ideal for structural fixings. Suitable for use with Fischer anchor rods and rebar connections, the FIS EB offers a secure bond even under extreme loads and temperature conditions. Its extended working time allows for easy handling and precise alignment during installation, making it suitable for large or complex projects. The FIS EB Injection Mortar is ideal for anchoring steel structures, columns, railings, and façade systems where maximum safety and performance are required. Combining strength, precision, and reliability, Fischer FIS EB ensures long-term stability in demanding construction environments.

Type of Product : Injection Mortar

Suitable For : Fixing Heavy Loads Indoors & Outdoors

Pack of : 1 Pc

Packaging Type : Cartridge

Language : EN, ES, PT

Approval : ETA-Approval

Explore other Variants (2)

Previous Next

Page 1 of 1 results