Filter

Categories
Price Range
Min Price:
Max Price:
₹
-
₹
Discount
Brands
Promos
Availability
Country of Origin
Express Shipping

Waterproofing

Showing 40 out of 356 products

Sort by
Pack of 1 kilogram
₹612  
Dr. Fixit Dampguard Is a two-component coating composed of epoxy resin, curing agent, inert pigments & properly selected fine fillers, additives in water as a medium. It has an advantage of dilution with water for application over cementitious surfaces. It is used as an internal coating for the waterproofing treatments of water tanks and building walls because it can be applied over damp surfaces, has excellent water resistance, adhesion. hardness, toughness and sets faster similar to solvent-based epoxy formulations.
Specification: Certified by CFTRI as per 21 CFR 175 - 300 of US - FDA
Areas of Application
Waterproofing treatment for RCC water tanks
Internal damp treatments
As putty with OPC- White cement to fill the fine cracks in internal walls
In sterile areas of pharma, food industries & hatcheries.
Features & Benefits
Economical - Water dilutable with high coverage hence economical.
Application advantage - Being water based it can be applied over damp concrete & plaster surfaces and provides excellent water-resistant coating.
Permeability - Reduces water absorption & permeability.
Adhesion - Provides excellent adhesion to all cementitious substrates
Film properties - Forms tough, hard & flexible coating.
Chemical resistant - Excellent resistance to water, salt water, mild acids, alkalis & soap water.
Water pressure - Can be applied from both sides of water pressure.
Toxicity - It is Non-toxic
Eco-friendly - Non-hazardous and non-flammable.
Microbial resistant - Possesses anti-fungal property and is resistant to micro-organisms.
Method of Application
1. SURFACE PREPARATION
Clean the surfaces thoroughly, It should be free from oil, grease, dust, dirt, fungus, and moss.
Thorough wire brushing followed by sanding with emery paper is recommended.
Remove the existing paint. neroo or instant lime. etc. while treating internal damp walls.
2. MIXING
First, stir the Base and Hardener thoroughly In their individual packs to achieve the uniform consistency.
Pour the Base part in appropriate container followed by the Hardener part and mix them thoroughly together into a homogeneous smooth paste.
Dilute the mixed compound with water (In ratio of 1 part Base:1 part Hardener:1 part water) by slow addition and mix it thoroughly until a brushable consistency is obtained.
APPLICATION
Waterproofing of RCC water tanks
Prepare a groove in the crack 1 mm to 5 mm. Clean the dust by washing it with water.
Fill the cracks & grooves with Dr. Fixit Dampguard and cement modified putty & allow it to dry for at least 24 hours.
Apply the first brush coat of mixed of Dr. Fixit Dampguard. Allow drying for 6 to 8 hrs.
Incase of severe dampness problems, apply Dr. Fixit Dampguard - OPC white cement Putty on the entire surface area. Allow it to dry for at least 24 hours.
Apply second brush coat of mixed Dr. Fixit Dampguard. Allow it to cure completely for 24 hours before applying a cement sand plaster on wall or a screed on floors.
Allow it to cure for minimum 3-4 days prior to storage of the water. The treatment of Dr. Fixit Dampguard then must be cleaned with the help of damp cloth or sponge and with plenty of water prior to storage of the water.
Dr. Fixit Dampguard Putty Preparation
Mix Dr. Fixit Dampguard (1 part Base & 1 part Hardener) thoroughly, add 2 parts of Ordinary Portland Cement or white cement and add required amount of water lo get a plaster-like consistency paste.
Precautions & Limitations
Not suitable for rising dampness.
All previous coatings to be completely removed before application of Dr. Fixit Dampguard.
Do not over dilute the product.
Dr. Fixit Dampguard, when applied on exterior surfaces, must be overcoated by weather durable coatings.
Avoid application below 10°C.
Use nylon brush for easy brushability.
Should not be applied on painted surfaces.
Not resistant to acids and alkalis of higher concentrations (usable up to 5% concentration) and for longer period.
Drying & curing time depends on the condition of damp surfaces and temperature.
Before mixing stir the individual packs to achieve uniform consistency.
Bucket of 20 litre
₹2,595 - ₹4,719
The Birla Opus Alldry Wall Fix 4 Waterproofing Paint for Exterior Walls, 936002 is designed to provide a durable protective layer that safeguards outdoor walls against water penetration and weather-related damage. Its advanced formulation creates an effective barrier that prevents moisture ingress, helping maintain the structural integrity and appearance of cement plaster, concrete, and masonry surfaces. This waterproofing paint spreads evenly to form a uniform coating, supporting long-term performance and reducing the risk of dampness, cracks, or surface deterioration caused by exposure to rain and humidity. Engineered for exterior applications, the Alldry Wall Fix 4 Waterproofing Paint enhances surface longevity by offering resistance to environmental wear, including sun, rain, and temperature fluctuations. Its smooth application ensures consistent coverage and an even finish across large wall areas, while also providing a stable base for any subsequent decorative coatings. Suitable for residential, commercial, and industrial buildings, the 936002 model helps protect exterior walls while maintaining a clean and well-prepared surface. It serves as a reliable solution for effective waterproofing and long-lasting wall protection.
green checkFinish Type : Matte
green checkSeries : Alldry
green checkType of Product : Alldry Wall Fix 4
green checkCoverage Area : 40-45 sq ft /L
green checkItem Form : Liquid
green checkColor : WF4 White
green checkDrying Time : 4 to 6 Hours
green checkSuitable For : Exterior Walls
green checkFeatures : Weather Resistant
green checkModel No : 936002
green checkName of Manufacturer/Packer/Importer : Grasim Industries Ltd
green checkColor Code : 9900
green checkPaint Type : Waterproof Coating
Bucket of 10 kilogram
₹1,415 - ₹15,339
IQSolv SeelanShield Waterproof Chemical Liquid Gloss Finish White for Interior & Exterior is a white, gloss-finish waterproofing product intended for surface protection and building maintenance applications. Belonging to the Waterproofing Additives category, this IQSolv formulation is designed for use on compatible interior and exterior surfaces where moisture resistance and a neat finish are important considerations. Its liquid consistency supports application across suitable surfaces in accordance with the prescribed product instructions, while the white colour provides a clean appearance after application. The gloss finish gives the treated surface a distinct sheen, differentiating it from matte-finish waterproofing products. Its defined colour and finish make it suitable for projects requiring a combination of surface treatment and a consistent visual appearance.IQSolv SeelanShield Waterproof Chemical Liquid Gloss Finish White for Interior & Exterior is relevant to residential, commercial and general building maintenance work involving compatible surfaces exposed to moisture. The product's waterproofing focus makes it pertinent to construction and renovation tasks where surface condition and protection from water ingress are key considerations. Its interior and exterior application designation supports its use across suitable areas within and outside buildings, subject to the recommended application method. The white gloss formulation also helps identify this variant within the IQSolv range of waterproofing chemicals. Surface preparation, coverage, drying time and application procedures should be determined according to the product label and technical specifications.
green checkPackaging Type : Bucket
green checkFinish Type : Gloss
green checkMaterial : Acrylic
green checkSeries : SeelanShield
green checkType of Product : Waterproof Chemical
green checkCoverage Area : 50 - 80 Sq Ft (Per Kg)
green checkItem Form : Liquid
green checkColor : White
green checkResistance : Water Resistance
green checkUses For Product : Exterior
green checkChemical Type : Waterproofing Chemical
green checkWaterproof : Yes
green checkSurface Recommendation : ‎Roof, Tile & Wall
Pack of 3 kilogram
₹707   ₹780
You save ₹73!
9.36% OFF
Can of 5 kilogram
₹2,595   ₹4,484
You save ₹1,889!
42.13% OFF
LuminX is a water-based acrylic cross-linked elastomeric Cool roof coating. Its innovative advanced nanotechnology-based formulation offers high solar reflectivity and thermal emittance which significantly reduces the roof temperature where roofs get exposed to intense UV rays in the hottest weather. LuminX works on the cool roof coating technology principle. Its high SRI value ensures that it reflects the maximum amount of heat. Its unique formulation holds well with the surface and offers complete protection with a promise to keep the building cool. Features: This Pack of 10 kg Cover around 350-400 Sqft Area with Double Coat. High Sri Value>122, Micro Fiber Reinforced Waterproofing & Saves Electrical Energy Upto 30 Percent. It is a Solar Reflective Coating, Which Have Ability to Reflects Maximum Amount of UV & Infra-Red Rays. Due to This, It Prevents the Roof from Heating Up During Peak Summer Season Thereby Reduces the Room Temperature. Highest Sri Value of 124, Due to This, It Prevents the Roof from Heating Up During Peak Summer Season Thereby Reduces the Room Temperature. Instruction For Use Open the bucket, Add 20% water in the bucket and stir it throughly. Clean the roof surface & remove the dirt completely. Apply the 1st coat by roller/brush. Wait for 6-8 hours. Apply 2nd coat, After 12 hours, roof is ready.
Can of 20 litre
₹1,297 - ₹20,059
You save ₹3,331!
14.24% OFF
Starshield Star Thermal Shield Solvent 650 °C Heat Protection Paint is a high-performance coating designed for extreme high-temperature applications. Formulated to withstand temperatures up to 650 °C, it provides reliable thermal protection for chimneys, ovens, burning stones, turbines, house boilers, and other industrial or residential heat-exposed surfaces. Its solvent-based composition ensures excellent adhesion to metals, masonry, and refractory materials, forming a durable, heat-resistant layer that prevents surface oxidation, corrosion, and scaling. This makes it ideal for both industrial and domestic high-heat environments. In addition to thermal resistance, Star Thermal Shield protects surfaces from soot, rust, and chemical exposure, extending the life of the substrate while maintaining its structural integrity. Quick-drying and easy to apply with a brush or spray, it offers a smooth, uniform finish suitable for harsh operating conditions. This smart coating ensures safety, durability, and efficiency by reducing heat-induced damage, making it a trusted solution for high-temperature protection and maintenance of critical equipment and structures.
green checkSeries : Star Thermal
green checkType of Product : Heat Protection Paint
green checkCoverage Area : 11.15 - 16.72 sq.m
green checkItem Form : Liquid
green checkColor : Silver
green checkCoverage : 120-180 sq.ft

Ratings and Reviews

5
13 Ratings, 13 Reviews
  • 5
  • 4
  • 3
  • 2
  • 1
  • 13
  • 0
  • 0
  • 0
  • 0

5

• Cool roof paint

Reviewed: 12 Feb, 2024

Excellent offer with first-time gift coupon. I strongly recommend them.

5

• original product

Reviewed: 7 Jul, 2022

Dr fixit very good

5

• Good results

Reviewed: 5 Nov, 2021

No more heating roof, Great result. I am happy

5

• Value for money

Reviewed: 5 Oct, 2021

value for money, gave amazing results.

5

• Satisfactorily results

Reviewed: 13 Aug, 2021

Great product, Satisfactorily results.

Recommended Items
oos-available Ships within 24 hrs
oos-available Ships within 24 hrs
22
Pack of 40 piece
₹110 ₹110
0.01% OFF
sku-leadTime Ships within 2 days
oos-available Ships within 24 hrs
oos-available Ships within 24 hrs
oos-available Ships within 24 hrs
oos-available Ships within 24 hrs
oos-available Ships within 24 hrs
sku-leadTime Ships within 2 days
oos-available Ships within 24 hrs
Browsing History
sku-leadTime Ships within 5 days
sku-leadTime Ships within 7 days
sku-leadTime Ships within 3 days
sku-leadTime Ships within 7 days
sku-leadTime Ships within 15 days

Top Selling Waterproofing Products Price List for November 2026

Product Name Specifications Expected Price Dispatch Time Discount
Dr. Fixit 10 Litre Repellin WR, 103 Color Clear, Yellow | Compatible Material Brick & Stone masonary surfaces ₹7,079 5 days --
Dr Fixit 101 Pidiproof LW+ 100 L Color Wine Red | Dosage 200 ml/50 kg Cement Bag ₹10,029 30 days --
Dr Fixit 196 Bitufix Bitumen Emulsion Paint 20 Litre Color Dark Brown | Compatible Material Concrete Structures ₹3,185 24 hrs --
Dr Fixit 107 Krystalline 25Kg Capacity 25 Kg | Coverage 15-17 sq. ft./ kg in Single Coat ₹3,025 5 days --
Dr Fixit 105 Powder Waterproofing 30Kg Appearance Free flowing powder | Color Off white ₹1,745 5 days --
Dr Fixit 302 Super Latex-20Kg Appearance Free flowing liquid | Color Milky White ₹6,371 7 days --
Dr Fixit 304 Powercrete Acrylic Waterproofing Polymer-50kg Color White | Compatible Material Concrete & Masonary Surfaces ₹15,339 5 days --
GENERIC 300 ml Waterproofing Glue with Brush for Roof Water Leakage Color Transparent | Compatible Material Glass, Ceramic, Plastic, Metal, Rubber ₹96 24 hrs --
ADMIRE PAINTS Dragon Shield Liquid Rubber Coating 1 L White for All Surface Capacity 1 L | Color White ₹660 30 days --
GENERIC 300 ml Waterproofing Glue with Brush for Roof Water Leakage (Pack of 4 Pcs) Color Transparent | Compatible Material Glass, Ceramic, Plastic, Metal, Rubber ₹353 24 hrs --
This data was last updated on 20/11/2026