• Home /
• All Brands /
• Colorado /
• Welding /
• Welding Tools & Accessories

Have a question? Call us now at +91 9650660070

Colorado Welding Tools Accessories

Showing 26 out of 26 products

Sort by

Recommended New Price : Low to High Price : High to Low

Ships within 30 days

Colorado 200A Magnetic Welding Holder

By Colorado

₹577  

The Colorado 200A magnetic welding holder securely holds metal sheets up to 1-1/2" thick with minimal effort. This magnetic welding holder features a four-point clamping system for secure hold during welding. The four 2-1/2" wide x 4-3/8" long nickel plated steel jaws grip the metal from all directions, eliminating slippage and jamming. It also includes a durable L-shaped handle for easy manipulation and a 9/16" diameter by 4-1/4" long carbide tipped swivel base that rotates 360° and is designed to accept a 3/8"-16 thread mounting bolt. This holder has a maximum capacity of 1.25" (1.00" round, 0.25" x 0.50" hole). The holder includes a removable pin for easy adjustment and replacement of the magnets, which are capable of holding up to 15 pounds each. This tool is designed for all kinds of position welding and cutting on flat, round bars and steel plates by using the magnetic principle. The holder has a strong magnetic force, with other advantage such as light weight, safe and convenient to carry out. The Magnetic Welding Holder can be widely used in many industries, including the automobile industry, construction industry, electronics industry, shipbuilding industry and so on. The versatile holder can be attached to any metal surface, including overhead structures, with its strong magnet and can hold up to 1/2". The welding holder has a magnetic base to hold it in place while you weld, and a spring-loaded arm that can hold your work piece at any angle. The arm extends up to 7 inches to give you plenty of room for your project.

Add to Cart Buy Now

Ships within 3 days

Colorado 600A Connector Stud

By Colorado

₹601  

The Colorado 600A Connector Stud is a three-pronged device for connecting the wires of a power supply to the power supply's housing, which is then plugged into an outlet in order to receive electricity. They are also used for terminating the end of an electrical wire that comes from an appliance or device. The name "connector stud" refers to the fact that it is used to connect two wires, such as from two different appliances, together. It allows the wires to be connected but also separated when necessary. It has been used for grounding and power applications in industrial control panels, factory equipment, and farm machinery. This stud is made of high grade steel and it comes with a MIG welded zinc plated finish. It is designed to be used in conjunction with other products, such as crimp nuts and fish tape, to complete a connection. The connector studs are manufactured using a proprietary process employing high impact polymer materials and chemical compounds which allow them to withstand temperatures up to 250 degrees F. It is designed so that the size of the stud is proportional to the size of the outlet box; this proportionality helps avoid overloading a stud with too much force and supports any load placed on it. The stud has a threaded coupler for connecting boxes together and also includes precise instructions for its use. These connectors come in many shapes and sizes, but the most common form is a straight male and female connector that fits together with a threaded interface. This allows for easy connection, but the threaded studs can also be tightened with a wrench to ensure the wire stays put.

Add to Cart Buy Now

Ships within 3 days

Colorado 600A Male Female Connector 

By Colorado

₹435  

The Colorado 600A Male/Female Connector is a connector designed to join two 600A power cords together. The connector will allow the joined cords to be easily disconnected by simply pulling on the release tabs located on both sides of the connector. The design of this connector prevents accidental disconnection by securely holding the connection together when in use. The cable can be used for connecting a solar panel system to an inverter, or connecting solar panels to one another. The connector has two twist-on connectors that can snap on to two other twisted wire ends. It also has a ground wire attached to the bottom. The insulation may be made of either plastic or glass. Both types are used for high voltage, indirect applications. The most common use for this joint is in the electrical distribution industry, and it is typically used to connect medium voltage lines to high voltage lines. It also features a standard locking latch for easy installation, which requires only a single action to engage or disengage the connector. The connector housing is made of polycarbonate plastic, and the contact surface inside the housing is made of highly conductive phosphor bronze. This unit is designed for use in electrical systems that are 600 amps or less and that are below ground level. It utilizes the three-point connection system, which offers both flexibility and support. The connectors are genderless and non-polarized, which makes them versatile. The connectors are also corrosion resistant and can withstand temperatures between -40°F and 260°F.

Add to Cart Buy Now

Ships within 3 days

Colorado 600A Cable Connectors 

By Colorado

₹565  

Colorado 600A cable connectors are the standard for high-voltage power transmission. They are used to connect copper cables in various types of substations, as well as in power plants and large industrial facilities. They also have applications in underground transmission lines, where their durability can be extremely useful. They come in a variety of different sizes, so it is important that you buy the right one for your application. They are made with only the most advanced materials. They feature a solid copper core with a copper-clad steel center pin and a copper-clad housing. The connectors include a jacketing material designed to protect the core from any damage or wear that could occur over time during use. It also keeps the exterior from getting damaged from unintended abrasions at home or on the job site. The outer cover also serves another purpose: it provides an easy grip for technicians who will be working with them on a regular basis. They are used for connecting and disconnecting a variety of electrical cables in applications including data, telephone, security, fire alarm, power and solar. The connectors feature a push-pull locking system with positive detent to ensure connection is secure and reliable. The wire entry is on the bottom of the connector, avoiding accidental disconnection issues that come with other types of connectors. This connector is designed to connect 600A cable in a 2-conductor installation by using a single bolt-washer combination. It is ideal for use in high-power distribution and transmission applications, including mining, industrial, utility and off-grid power generation where high current and voltage are required.

Add to Cart Buy Now

Related Searches

colorado welding tools

Ships within 3 days

Colorado 300A Welding Holder 

By Colorado

₹778  

The 300A Welding Holder is a rugged, portable clamp for holding a grinder or welder during welding. It's capable of holding the heaviest grinders and welders due to its massive cast-iron base and large steel hook. The hook can be opened wider than any other welding holder, making it superior. It has a welded steel base with an aluminum support arm that has a swivel top and an adjustable clamping mechanism. This holder will accommodate pipe from 3/4" to 2". The base clamp is made from a flat piece of steel with a curved bend at one end. It has an opening on one side and has holes where bolts can be screwed through it to secure it to a surface. On top of the flat piece of steel there is another flat piece with a screw hole near the center which goes through the curved bend of the first piece of metal. It also has a swivel that allows you to maneuver your workspace and adjust the angle of your welding at any time. This is perfect for those times when you need to make an adjustment mid-job, like when you're working on something large and need to move it into position or if you need to get better access to an area. These holders are widely used in a variety of applications, including testing of pipeline samples, installation of pipeline equipment and performing other pipeline maintenance activities. The dual-axis design also allows you to weld at any angle between 0 degrees to 360 degrees. This holder will fit almost any pipe size with its adjustable arms.

Add to Cart Buy Now

Ships within 30 days

Colorado Welding Cable-to-Cable Connector 35/50 Size for Inverter Welding Machine

By Colorado

₹400  

The Colorado WELDING CABLE TO CABLE CONNECTOR 3550 SIZE ( CABLE JOINTER ) Inverter Welding Machine, a reliable solution engineered for everyday tasks and professional needs alike. Crafted using high-quality materials, this product offers excellent performance, durability, and ease of use in a variety of settings. Whether for DIY projects or industrial use, it ensures efficient results while adding value to your toolkit or household essentials. Part of the trusted Colorado range in General Hardware & Utility Products, the Colorado WELDING CABLE TO CABLE CONNECTOR 3550 SIZE ( CABLE JOINTER ) Inverter Welding Machine stands out for its user-centric design and dependable quality. Its ergonomic build and smart features make it a go-to choice for customers who prioritize both functionality and longevity. Choose Colorado for tools and accessories that deliver on performance every time.

Add to Cart Buy Now

Ships within 30 days

Colorado 160A CUTTING TORCH 

By Colorado

₹353  

Colorado 160A Cutting Torch is a professional cutting torch used for cutting and welding metals. The torch can be used for cutting and bending metal, glass, ceramic tile, or stone. The torch comes with hoses, a regulator, and two nozzle tips, and it's designed for easy transport from one location to another. It weighs just over 20 pounds and comes with a rubber grip on its handle. This cutting torch can be used for welding jobs as well as for cutting metal sheets. It produces jet flames that range from 1/4" to 2". It can cut through even the toughest metals like steel without any difficulty and with utmost precision. This makes it an ideal tool for use in industries such as construction, shipbuilding, farming, manufacturing, and automobile production etc. The stainless-steel nozzle of this product ensures that it lasts long while keeping rust away from it. The brass hose ensures that the product remains sturdy while also increasing its durability. It is typically used when working with metals such as copper, aluminum, and steel, as well as several types of plastic and fiberglass. The torch has two burners, one to feed oxygen and the other for fuel. The torch is used in both commercial and industrial applications, and can be used in a variety of ways. The torch also features automatic ignition, which allows for more precise control over cutting and heating. he torch has a maximum cutting capacity of 1-7/8” while still being compact enough to fit in the average toolbox, making it a convenient option to have on hand when you need to cut some metal.

Add to Cart Buy Now

Ships within 30 days

Colorado Welder Switch 30 A, 4-Pin Type ON/OFF Switch for Inverter Welding Machine (Pack of 2)

By Colorado

Pack of 2 piece

₹412  

The Colorado Switch 30 Ampere Welder Welding Machine Switch 4-Pin Type ON/Off 2pc Inverter Welding Machine, a reliable solution engineered for everyday tasks and professional needs alike. Crafted using high-quality materials, this product offers excellent performance, durability, and ease of use in a variety of settings. Whether for DIY projects or industrial use, it ensures efficient results while adding value to your toolkit or household essentials. Part of the trusted Colorado range in General Hardware & Utility Products, the Colorado Switch 30 Ampere Welder Welding Machine Switch 4-Pin Type ON/Off 2pc Inverter Welding Machine stands out for its user-centric design and dependable quality. Its ergonomic build and smart features make it a go-to choice for customers who prioritize both functionality and longevity. Choose Colorado for tools and accessories that deliver on performance every time.

Add to Cart Buy Now

Ships within 30 days

Colorado Heavy Duty Welding Holder 600 Amp Big Size for Welding Electrode No. 8 & No. 10 (Pack of 10)

By Colorado

Pack of 10 piece

₹742  

The Colorado WELDING HOLDER HEAVY 600.AMP BIG SIZE USE WELDING ELECTRODE 8.NO & 10 NO Welding Rod (Pack of 10), a reliable solution engineered for everyday tasks and professional needs alike. Crafted using high-quality materials, this product offers excellent performance, durability, and ease of use in a variety of settings. Whether for DIY projects or industrial use, it ensures efficient results while adding value to your toolkit or household essentials. Part of the trusted Colorado range in General Hardware & Utility Products, the Colorado WELDING HOLDER HEAVY 600.AMP BIG SIZE USE WELDING ELECTRODE 8.NO & 10 NO Welding Rod (Pack of 10) stands out for its user-centric design and dependable quality. Its ergonomic build and smart features make it a go-to choice for customers who prioritize both functionality and longevity. Choose Colorado for tools and accessories that deliver on performance every time.

Add to Cart Buy Now

Ships within 30 days

Colorado Insulated Earth Clamp 400 Amp for Inverter Welding Machine

By Colorado

₹459  

The Colorado Insulated Earth Clamp 400 AMP. Inverter Welding Machine, a reliable solution engineered for everyday tasks and professional needs alike. Crafted using high-quality materials, this product offers excellent performance, durability, and ease of use in a variety of settings. Whether for DIY projects or industrial use, it ensures efficient results while adding value to your toolkit or household essentials. Part of the trusted Colorado range in General Hardware & Utility Products, the Colorado Insulated Earth Clamp 400 AMP. Inverter Welding Machine stands out for its user-centric design and dependable quality. Its ergonomic build and smart features make it a go-to choice for customers who prioritize both functionality and longevity. Choose Colorado for tools and accessories that deliver on performance every time.

Add to Cart Buy Now

Ships within 30 days

Colorado 220A Cable Connector

By Colorado

₹518  

The Colorado 220A Cable Connector is a device that helps connect two pieces of cable by clamping them together. The device can take on a variety of sizes from 2 gauge up to 2/0. It has a locking mechanism to prevent the wires from being pulled out of the connector. The connector has an interior diameter of 20 millimeters, and a maximum current rating of 1/4 ampere. It is commonly used to connect pairs of wire together, such as in an electrical project or a home theater installation. This cable connector is manufactured from flexible rubber and natural latex, making it capable of withstanding extreme temperatures and weather conditions while protecting the wires inside from water damage. It is constructed with a metal shell that provides protection against up to 2,200 volts. The shell consists of three parts: the casing, the back, and the base. A cross section of the casing reveals that it consists of six wires for carrying current, as well as two insulated heavy-duty clips. In addition, there are two pairs of openings for fastening or securing the device in place. It is used for making or breaking a circuit connection to the electrical system of an aircraft, and is designed to be connected directly to a plug-in connector on an aircraft. The 220a contains an internal spring-loaded mechanism that allows it to be installed and removed with minimal effort, even when wearing bulky gloves. It is also waterproof, so not to worry about it shorting out due to water or debris buildup.

Add to Cart Buy Now

Ships within 30 days

Colorado 600A Male Connector

By Colorado

₹447  

Colorado 600A Male Connector is a piece of utility device which is used to transfer electricity in the form of alternating current from one place to another. The device has a sturdy construction and can ensure smooth flow of electricity without any interruptions. It is a heavy duty, electrical connector assembly for use with large gauge copper or aluminum wire. This item is compatible with 600A service entrance applications and meets or exceeds the requirements. It consists of a copper pin that is inserted into the wall of the duct and connected to the electrical circuit by a wire. This connector is suitable for both 120 and 240 volt electrical circuits. The 600A Colorado Male Connector has a locking ring that prevents accidental disconnection and provides added strain relief. The 600A male uses a C-Coonector designed specifically to prevent electrical flashovers and arc shielding. The connector system also has an air gap of 1/8", which prevents short circuits caused by impurities in the ground material. It also comes with an adapter ring, which makes it easy to insert the female connector into a panel box without having to remove the cover plate. Another option is the quick disconnect wire end, which allows you to easily attach or detach wires from the male connector without using any tools or cutting any insulation. It best to choose a male connector that includes a gasket or seal on the inside of its housing. This helps prevent water and dust from getting inside where they can cause corrosion over time.

Add to Cart Buy Now

Ships within 30 days

Colorado 600A Welding Holder

By Colorado

Pack of 10 piece

₹766  

The Colorado 600A welding holder is a very sophisticated and well made welding protection device. It is designed to be used by welders who are working with extremely large pieces of metal, and need to be able to access their work easily. The holder is very light weight, weighing in at just under 4 pounds, and can be worn on either the left or right hand. It comes in one size that fits all users. The Welding Table uses 5/8" round tubing for the outside framing and 1" square tubing for the inside framing. The overall frame is made from 3/4" plate steel. The table top itself is made from 1/2" thick industrial grade plastic with a high load capacity of 1000 lbs per square foot. In addition, the welded frame provides added strength so that the table can handle heavy loads up to 2000 lbs. The 6-inch jaw length and the 90-degree angle allow this holder to be used in a variety of applications. This part is constructed from solid steel, providing long lasting durability, and incorporates a powder coat finish that resists rust and corrosion. It comes with a high-quality plastic case for protection during transportation. The six arms hold the rod at a 45 degree angle, which allows for a more natural welding motion. It's made of heavy duty steel with a powder coat finish, and includes a removable lower tray for convenience. The clamp, also made of steel, has a soft padding for added comfort when in use. The clamp is attached to the arm which can be adjusted in length for optimal convenience.

Add to Cart Buy Now

Ships within 30 days

Colorado 600A Electrode Holder 

By Colorado

₹506  

The Colorado 600A Electrode Holder is a great addition to any environment where the power of an arc welder needs to be put to good use. This sturdy device will help you create strong welds and conduct your work with efficiency through its heavy-duty construction and design, which features an adjustable guard and a locking lever for added safety. It also helps in providing a better grip to the electrodes, thus providing a safe application on patients. The product is designed to offer excellent patient comfort during the procedure. The 600A has a solid, sturdy base and flexible arm that bends to accommodate subjects of all shapes and sizes. It can easily be attached to any headgear or cap by means of the included Velcro straps, making it easy to use during sessions. The device can also be easily cleaned with disinfecting wipes or alcohol pads. The electrode holder can be used with a variety of electrodes, including: Disposable Insertable (Pre-gelled or Hydrocolloid), Disposable Insertable (Single Use Plain), Disposable Insertable (Single Use Fancy), and Disc Electrodes. The Electrode Holder snaps onto the Handpiece. The electrode is placed onto the electrode holder. It features a unique, patented locking mechanism that allows the user to hinge the electrodes into place and then lock them in position for use. After the procedure, the electrodes can be unlocked and removed without damaging the holder, which is made of a durable plastic. The arms also allow for easy positioning of the electrodes with minimal effort on the part of the user. The ends of each arm are designed to hold cork-stopper electrical pads, which are included with every holder.

Add to Cart Buy Now

Ships within 30 days

Colorado 300A Electrode Holder 

By Colorado

₹435  

The Colorado 300A Electrode Holder is designed to hold a 300A electrode. This holder is made of sturdy aluminum and has an adjustable clamp that provides a secure fit on the electrode. The holder is ergonomically designed for comfort and ease of use. It has a thumb trigger that enables an operator to grab an electrode quickly without moving the hand from the switch; this feature also allows an operator to grab the electrode with a relaxed grip and hold it during an emergency situation. Each holder comes with three electrodes, two of which are shaped for left-hand holding, and one of which is shaped for right-hand holding. The holder has a dual-sided design that enables use of either the standard 45° angle or a full 90° angle. Its main function is to enable easy electrode positioning during dental procedures. It does this by providing three support points for the electrode: two adjustable nylon straps on the top and bottom, and one Velcro® strap that goes around the headrest—allowing maximum flexibility. The holder measures 1 inch by 1 inch and has two threaded holes in the back for attaching screws. The screw hole on the bottom is slightly larger to allow for easier electrode adjustments. The electrode holder is made of a non-conductive plastic and has a locking mechanism to ensure the electrode does not move during administration. It is filled with a conductive fluid in which the electrode is lowered and raised. The 300A Electrode Holder keeps the electrode level and steady, ensuring proper positioning during scanning.

Add to Cart Buy Now

Ships within 30 days

Colorado 600A Magnetic Clamps Set

By Colorado

Set of 6 piece

₹1,769  

Colorado 600A Magnetic Clamps Set are designed for use in a variety of industrial and commercial applications. They have extra wide jaws that allow them to hold standard 4" x 6" plywood sheets, or 2" x 4" material up to ¾". The magnetic clamps are made from forged steel and do not require any special tools for assembly. They can be used to hold materials together while gluing, drying or clamping. These unique clamps feature a magnetic base that helps to hold the object in place, allowing you to adjust it with ease. The clamped object will also be held securely, even if the magnets are positioned at an angle. They come in different strengths and sizes, which is important because they're used with wires of different thicknesses. It is easy to use as it doesn't need any tool to operate. The magnetic force will hold all the materials you have placed into the clamps in an upright position. The clamps are made from aluminum alloy which makes it very durable and long lasting. The magnetic clamps are made of 16 gauge steel, and they have a soft vinyl coating that protects the surface of your workbench. The smallest clamp has a jaw opening of 1 inch, the medium clamp has a jaw opening of 2 inches, and the larger clamps have jaw openings of 3 inches and 5 inches respectively. The set includes 6 screws for mounting the clamps. They can hold any material up to 3/4" in diameter, making them incredibly versatile. The large clamping face gives you a secure grip and the rubber coating on the handles makes it comfortable to hold and easy to position.

Add to Cart Buy Now

Ships within 30 days

Colorado Plasma Cutter Torch Head Body for Plasma Cutting Machines P80

By Colorado

₹1,651  

The Colorado P80 Straight Shank Torch Body 220 A, an elegant fusion of design and functionality. Wrapped in premium materials and engineered for ergonomic support, this chair is ideal for anyone who spends long hours at a desk. Whether you're working from home or setting up a corporate workspace, it blends effortlessly into any environment while offering lasting comfort. Crafted by Kepler Brooks, a name known for quality and innovation in the Office Chairs category, the Colorado P80 Straight Shank Torch Body 220 A is designed with attention to detail. Featuring an adjustable height mechanism, supportive contours, and a sturdy base, it ensures proper posture and mobility throughout your day. Redefine your work setup with a chair that speaks professionalism and comfort.

Add to Cart Buy Now

Ships within 30 days

Colorado Torch Roller Guide Wheel for Plasma Cutting (Pack of 2)

By Colorado

Pack of 2 piece

₹801  

The Colorado Torch Roller Guide Wheel 450 A (Pack of 2), an elegant fusion of design and functionality. Wrapped in premium materials and engineered for ergonomic support, this chair is ideal for anyone who spends long hours at a desk. Whether you're working from home or setting up a corporate workspace, it blends effortlessly into any environment while offering lasting comfort. Crafted by Kepler Brooks, a name known for quality and innovation in the Office Chairs category, the Colorado Torch Roller Guide Wheel 450 A is designed with attention to detail. Featuring an adjustable height mechanism, supportive contours, and a sturdy base, it ensures proper posture and mobility throughout your day. Redefine your work setup with a chair that speaks professionalism and comfort.

Add to Cart Buy Now

Ships within 30 days

Colorado Ceramic Shield Cap for Plasma Cutter Torch P80 (Pack of 10)

By Colorado

Pack of 10 piece

₹1,037  

The Colorado P80 Ceramic Shield Caps 220 A (Pack of 10), an elegant fusion of design and functionality. Wrapped in premium materials and engineered for ergonomic support, this chair is ideal for anyone who spends long hours at a desk. Whether you're working from home or setting up a corporate workspace, it blends effortlessly into any environment while offering lasting comfort. Crafted by Kepler Brooks, a name known for quality and innovation in the Office Chairs category, the Colorado P80 Ceramic Shield Caps 220 A (Pack of 10) is designed with attention to detail. Featuring an adjustable height mechanism, supportive contours, and a sturdy base, it ensures proper posture and mobility throughout your day. Redefine your work setup with a chair that speaks professionalism and comfort.

Add to Cart Buy Now

Ships within 30 days

Colorado Ceramic Cap 15 cm Width & 5 cm Height for Plasma Cutter Torch, CUT-40

By Colorado

₹695  

The Colorado Ceramic Cap for Plasma Cutter 15 cm Width & 5 cm Height, an elegant fusion of design and functionality. Wrapped in premium materials and engineered for ergonomic support, this chair is ideal for anyone who spends long hours at a desk. Whether you're working from home or setting up a corporate workspace, it blends effortlessly into any environment while offering lasting comfort. Crafted by Kepler Brooks, a name known for quality and innovation in the Office Chairs category, the Colorado Ceramic Cap for Plasma Cutter 15 cm Width & 5 cm Height is designed with attention to detail. Featuring an adjustable height mechanism, supportive contours, and a sturdy base, it ensures proper posture and mobility throughout your day. Redefine your work setup with a chair that speaks professionalism and comfort.

Add to Cart Buy Now

Ships within 30 days

Colorado Welding Machine Cable Plug Big Size Socket 1 Male, 1 Female Connector for Inverter Welding Machine

By Colorado

₹553  

The Colorado BIGG SIZE 35_50 WELDING MACHINE CABLE PLUG SOCKET 1 MALE / 1 FEMALE CONNECTOR I Inverter Welding Machine, a reliable solution engineered for everyday tasks and professional needs alike. Crafted using high-quality materials, this product offers excellent performance, durability, and ease of use in a variety of settings. Whether for DIY projects or industrial use, it ensures efficient results while adding value to your toolkit or household essentials. Part of the trusted Colorado range in General Hardware & Utility Products, the Colorado BIGG SIZE 35_50 WELDING MACHINE CABLE PLUG SOCKET 1 MALE / 1 FEMALE CONNECTOR I Inverter Welding Machine stands out for its user-centric design and dependable quality. Its ergonomic build and smart features make it a go-to choice for customers who prioritize both functionality and longevity. Choose Colorado for tools and accessories that deliver on performance every time.

Add to Cart Buy Now

Ships within 30 days

Colorado Connector Small Size 2 Male, 2 Female for Inverter Welding Machine

By Colorado

₹400  

The Colorado SMALL SIZE 10 _25 CONNECTOR 2 MALE / 2 FEMAIL Inverter Welding Machine, a reliable solution engineered for everyday tasks and professional needs alike. Crafted using high-quality materials, this product offers excellent performance, durability, and ease of use in a variety of settings. Whether for DIY projects or industrial use, it ensures efficient results while adding value to your toolkit or household essentials. Part of the trusted Colorado range in General Hardware & Utility Products, the Colorado SMALL SIZE 10 _25 CONNECTOR 2 MALE / 2 FEMAIL Inverter Welding Machine stands out for its user-centric design and dependable quality. Its ergonomic build and smart features make it a go-to choice for customers who prioritize both functionality and longevity. Choose Colorado for tools and accessories that deliver on performance every time.

Add to Cart Buy Now

Ships within 30 days

Colorado Copper Cable with Big Connector 35/50 Pin Size 5 m Long for Inverter Welding Machine

By Colorado

₹1,651  

The Colorado HOLDER 5 METER LONG COPPER CABLE SIZE WHITH BIGG Connector 35/50 PIN SIZE Inverter Welding Machine, a reliable solution engineered for everyday tasks and professional needs alike. Crafted using high-quality materials, this product offers excellent performance, durability, and ease of use in a variety of settings. Whether for DIY projects or industrial use, it ensures efficient results while adding value to your toolkit or household essentials. Part of the trusted Colorado range in General Hardware & Utility Products, the Colorado HOLDER 5 METER LONG COPPER CABLE SIZE WHITH BIGG Connector 35/50 PIN SIZE Inverter Welding Machine stands out for its user-centric design and dependable quality. Its ergonomic build and smart features make it a go-to choice for customers who prioritize both functionality and longevity. Choose Colorado for tools and accessories that deliver on performance every time.

Add to Cart Buy Now

Ships within 30 days

Colorado A1 Welding Cable Male & Female Wire Connectors for Inverter Welding Machine

By Colorado

₹459  

The Colorado A1 WELDING CABLE Male & Female Welding Cable Wire Connectors Inverter Welding Machine, a reliable solution engineered for everyday tasks and professional needs alike. Crafted using high-quality materials, this product offers excellent performance, durability, and ease of use in a variety of settings. Whether for DIY projects or industrial use, it ensures efficient results while adding value to your toolkit or household essentials. Part of the trusted Colorado range in General Hardware & Utility Products, the Colorado A1 WELDING CABLE Male & Female Welding Cable Wire Connectors Inverter Welding Machine stands out for its user-centric design and dependable quality. Its ergonomic build and smart features make it a go-to choice for customers who prioritize both functionality and longevity. Choose Colorado for tools and accessories that deliver on performance every time.

Add to Cart Buy Now

Ships within 30 days

Colorado Welding Machine Cable Big Size Socket 1 Male, 1 Female, 1 L Key for Inverter Welding Machine

By Colorado

₹542  

The Colorado BIGG SIZE 35.50.WELDING MACHINE CABLE SOCKET 1 MALE / 1 FEMALE / 1 L KEY Inverter Welding Machine, a reliable solution engineered for everyday tasks and professional needs alike. Crafted using high-quality materials, this product offers excellent performance, durability, and ease of use in a variety of settings. Whether for DIY projects or industrial use, it ensures efficient results while adding value to your toolkit or household essentials. Part of the trusted Colorado range in General Hardware & Utility Products, the Colorado BIGG SIZE 35.50.WELDING MACHINE CABLE SOCKET 1 MALE / 1 FEMALE / 1 L KEY Inverter Welding Machine stands out for its user-centric design and dependable quality. Its ergonomic build and smart features make it a go-to choice for customers who prioritize both functionality and longevity. Choose Colorado for tools and accessories that deliver on performance every time.

Add to Cart Buy Now

Ships within 30 days

Colorado Welding Machine Holder 300 Amps Small Size (21 cm) for Inverter Welding Machine

By Colorado

₹471  

The Colorado Welding MACHINE Holder 300amps Small SIZE (21cm) Inverter Welding Machine, a reliable solution engineered for everyday tasks and professional needs alike. Crafted using high-quality materials, this product offers excellent performance, durability, and ease of use in a variety of settings. Whether for DIY projects or industrial use, it ensures efficient results while adding value to your toolkit or household essentials. Part of the trusted Colorado range in General Hardware & Utility Products, the Colorado Welding MACHINE Holder 300amps Small SIZE (21cm) Inverter Welding Machine stands out for its user-centric design and dependable quality. Its ergonomic build and smart features make it a go-to choice for customers who prioritize both functionality and longevity. Choose Colorado for tools and accessories that deliver on performance every time.

Add to Cart Buy Now

Previous Next

Page 1 of 1 results