Have a question? Call us now at +91 9650660070

Contitech Timing Belt

Showing 31 out of 31 products

Sort by

Contitech Timing Belt 80 Teeth 640 mm Length 21 mm Width, CTD 640-8M-21

Ships within 120 days

Contitech Timing Belt Fabric, Polyurethane 21 mm Width 8 mm Pitch 8M Profile (Length: 640 - 1280 mm)

By Contitech

₹24,779 - ₹30,679

The ContiTech Timing Belt Fabric, Polyurethane 21 mm Width 8 mm Pitch 8M Profile (Length: 640 - 1280 mm) is specified for synchronous drive systems requiring a polyurethane belt with a fabric feature. Its 21 mm width and 8 mm tooth pitch provide key dimensions for matching the belt to a compatible pulley arrangement. The 8M profile identifies the tooth-spacing configuration, while the available length range of 640 mm to 1280 mm helps users select a size suited to the drive layout. These details are useful when comparing replacement parts or specifying a belt for machinery assembly. The ContiTech Timing Belt Fabric, Polyurethane 21 mm Width 8 mm Pitch 8M Profile (Length: 640 - 1280 mm) may be suitable for compatible industrial equipment and mechanical systems that rely on coordinated belt-and-pulley movement. Product selection should account for the required belt length, width, tooth pitch, pulley dimensions, and installation conditions. Confirm the fabric and polyurethane construction against the requirements of the intended drive. Checking the existing belt identification and equipment documentation can help prevent sizing errors. Selecting a compatible variant supports appropriate fitting and helps maintain the intended mechanical arrangement.

Type of Product : Timing Belt

Maximum Operating Temperature : +80˚C

Width : 21 mm

Pitch : 8 mm

Minimum Operating Temperature : -40˚C

Profile : 8M

Contitech Timing Belt 135 Teeth 1890 mm Length 68 mm Width, CTD 1890-14M-68

Ships within 120 days

Contitech Timing Belt 135 Teeth 1890 mm Length 68 mm Width, CTD 1890-14M-68

By Contitech

₹2,71,399

Contitech Timing Belt 135 Teeth 1890 mm Length 37 mm Width, CTD 1890-14M-37

Ships within 120 days

Contitech Timing Belt Fabric, Polyurethane 37 mm Width 14 mm Pitch 14M Profile (Length: 1400 - 1890 mm)

By Contitech

₹1,14,459 - ₹1,53,399

The ContiTech Timing Belt Fabric 37 mm Width 14 mm Pitch 14M Profile (Length: 1400 - 1890 mm) is specified for synchronous drive applications requiring a 37 mm wide belt with a 14M profile. The profile indicates a 14 mm tooth pitch, which must correspond to the pulley configuration used in the equipment. Its listed length range of 1400 mm to 1890 mm provides sizing options for compatible drive layouts. The fabric feature is another identifying characteristic, helping distinguish this product from belts with different construction details. These dimensions support product comparison and accurate selection during maintenance or assembly. The ContiTech Timing Belt Fabric 37 mm Width 14 mm Pitch 14M Profile (Length: 1400 - 1890 mm) can be considered for suitable industrial machinery and mechanical systems designed for this belt profile. Before selection, check the pulley tooth pitch, belt width, required length, and available space in the drive assembly. Confirm the fabric construction against the application's specifications and consult the equipment documentation where necessary. Choosing a belt based on the complete set of dimensions helps avoid mismatches during installation. The correct variant should align with the intended drive design and the operating requirements of the machinery.

Type of Product : Timing Belt

Maximum Operating Temperature : +80˚C

Width : 37 mm

Pitch : 14 mm

Minimum Operating Temperature : -40˚C

Profile : 14M

Contitech Timing Belt 135 Teeth 1890 mm Length 20 mm Width, CTD 1890-14M-20

Ships within 120 days

Contitech Timing Belt 135 Teeth 1890 mm Length 20 mm Width, CTD 1890-14M-20

By Contitech

₹79,059

Contitech Timing Belt 150 Teeth 1200 mm Length 36 mm Width, CTD 1200-8M-36

Ships within 120 days

Contitech Timing Belt Fabric, Polyurethane 36 mm Width 8 mm Pitch 8M Profile (Length: 800 - 1200 mm)

By Contitech

₹41,299 - ₹48,379

The ContiTech Timing Belt Fabric, Polyurethane 36 mm Width 8 mm Pitch 8M Profile (Length: 800 - 1200 mm) is designed for compatible timing drive systems that require a 36 mm wide polyurethane belt with a fabric feature. Its 8M profile uses an 8 mm tooth pitch, making profile matching important when pairing the belt with toothed pulleys. The listed length range of 800 mm to 1200 mm provides sizing options for installations designed around these dimensions. The specified width, material, profile, and length help distinguish this belt from other variants in the same product category. The ContiTech Timing Belt Fabric, Polyurethane 36 mm Width 8 mm Pitch 8M Profile (Length: 800 - 1200 mm) can be evaluated for compatible machinery and synchronous transmission arrangements. The belt should be selected according to the complete drive design, including pulley tooth geometry, required belt length, available installation space, and operating conditions. Verify that the fabric construction and polyurethane material meet the needs of the intended application. Checking the equipment documentation and existing belt markings before ordering can help identify the correct replacement. Proper dimensional matching is essential for appropriate fitment and coordinated movement within the drive system.

Type of Product : Timing Belt

Maximum Operating Temperature : +80˚C

Width : 36 mm

Pitch : 8 mm

Minimum Operating Temperature : -40˚C

Profile : 8M

Contitech Timing Belt 150 Teeth 1200 mm Length 12 mm Width, CTD 1200-8M-12

Ships within 120 days

Contitech Timing Belt Fabric, Polyurethane 12 mm Width 8 mm Pitch 8M Profile (Length: 640 - 1200 mm)

By Contitech

₹15,339 - ₹17,699

The ContiTech Timing Belt Fabric, Polyurethane 12 mm Width 8 mm Pitch 8M Profile (Length: 640 - 1200 mm) is a polyurethane timing belt with a fabric feature, intended for compatible synchronous drive arrangements. Its 8M profile specifies an 8 mm tooth pitch, while the 12 mm width defines the belt's lateral dimension. The listed length range of 640 mm to 1200 mm provides a choice of sizes for drive systems designed around these measurements. The stated material and fabric construction help distinguish this product from other timing belts with different materials or surface configurations. The ContiTech Timing Belt Fabric, Polyurethane 12 mm Width 8 mm Pitch 8M Profile (Length: 640 - 1200 mm) can be considered for suitable machinery, conveying mechanisms, and other compatible applications requiring a polyurethane timing belt. Correct engagement depends on matching the belt profile to the pulley teeth and selecting the appropriate belt length and width. Before purchasing, confirm the precise length, pulley compatibility, installation space, and required operating characteristics. Check the product specification to ensure the fabric construction is appropriate for the application. These checks help identify the right belt for maintenance, replacement, or integration into a mechanical drive system.

Type of Product : Timing Belt

Maximum Operating Temperature : +80˚C

Width : 12 mm

Pitch : 8 mm

Minimum Operating Temperature : -40˚C

Profile : 8M

Contitech Timing Belt 90 Teeth 720 mm Length 30 mm Width, 720 8M 30

Ships within 120 days

Contitech Timing Belt Rubber 30 mm Width 8 mm Pitch 8M Profile (Length: 560 - 2800 mm)

By Contitech

₹7,197 - ₹20,059

The ContiTech Timing Belt Rubber 30 mm Width 8 mm Pitch 8M Profile (Length: 560 - 2800 mm) is specified for synchronous mechanical drives requiring a rubber belt with a 30 mm width and an 8M tooth profile. Its 8 mm tooth pitch is an important measurement for matching the belt with compatible pulleys. The stated length range of 560 mm to 2800 mm allows selection across different drive layouts designed around these dimensions. The combination of rubber material, belt width, pitch, and profile helps identify this product when comparing replacement parts or selecting components for machinery. The ContiTech Timing Belt Rubber 30 mm Width 8 mm Pitch 8M Profile (Length: 560 - 2800 mm) may be evaluated for industrial equipment and mechanical transmission systems that use a matching 8M drive arrangement. Before purchasing, confirm the required belt length, pulley tooth geometry, width, and installation measurements. Check the existing belt designation and equipment documentation to avoid confusing it with other 8M variants. The operating conditions and material requirements should also be reviewed before selecting a replacement. These checks help ensure that the chosen belt is dimensionally compatible with the intended machinery.

Type of Product : Timing Belt

Maximum Operating Temperature : +100˚C

Width : 30 mm

Pitch : 8 mm

Minimum Operating Temperature : -20˚C

Profile : 8M

Contitech Timing Belt 90 Teeth 450 mm Length 15 mm Width, 450 5M 15

Ships within 120 days

Contitech Timing Belt Rubber 15 mm Width 5 mm Pitch 5M Profile (Length: 225 - 755 mm)

By Contitech

₹2,477 - ₹4,719

The ContiTech Timing Belt Rubber 15 mm Width 5 mm Pitch 5M Profile (Length: 225 - 755 mm) is designed for compatible synchronous drive systems that use a rubber timing belt with a 5M profile. Its 15 mm width and 5 mm tooth pitch provide essential dimensions for matching the belt with the correct pulleys. The length range of 225 mm to 755 mm makes this variant suitable for consideration in drive arrangements requiring a belt within these specified limits. The rubber material and metric profile help distinguish this belt from polyurethane T-profile products and other rubber belt variants. The ContiTech Timing Belt Rubber 15 mm Width 5 mm Pitch 5M Profile (Length: 225 - 755 mm) may be considered for compatible machinery and mechanical transmission applications designed for a 5M belt drive. Correct selection depends on the belt's length, width, tooth profile, pulley configuration, and installation requirements. Before purchasing, compare these measurements with the equipment specification or existing belt identification. Also verify that the rubber construction meets the application's operating needs. Matching the complete specification rather than choosing by length alone helps reduce fitting issues and supports suitable integration into the drive assembly.

Type of Product : Timing Belt

Maximum Operating Temperature : +100˚C

Width : 15 mm

Pitch : 5 mm

Minimum Operating Temperature : -20˚C

Profile : 5M

Contitech Timing Belt 75 Teeth 375 mm Length 9 mm Width, 375 5M 9

Ships within 120 days

Contitech Timing Belt Rubber 9 mm Width 5 mm Pitch 5M Profile (Length: 225 - 2525 mm)

By Contitech

₹1,887 - ₹5,663

The ContiTech Timing Belt Rubber 9 mm Width 5 mm Pitch 5M Profile (Length: 225 - 2525 mm) is designed for compatible synchronous drives requiring a rubber timing belt with a 9 mm width and a 5M profile. The 5 mm tooth pitch is a defining dimension for matching the belt to compatible toothed pulleys. With a stated length range of 225 mm to 2525 mm, this product offers sizing options for a variety of drive layouts. Its rubber construction and metric profile help distinguish it from polyurethane belts and timing belts with other pitches or widths. The ContiTech Timing Belt Rubber 9 mm Width 5 mm Pitch 5M Profile (Length: 225 - 2525 mm) may be considered for compatible industrial equipment, compact machinery, and mechanical transmission systems designed around the 5M profile. Before purchasing, confirm the required belt length, width, tooth pitch, pulley configuration, and installation requirements. Check the existing belt markings or equipment documentation to ensure the replacement matches the original specification. It is also important to review the operating conditions of the intended application. Proper specification matching helps identify a suitable belt for maintenance, replacement, or machinery assembly.

Type of Product : Timing Belt

Maximum Operating Temperature : +100˚C

Width : 9 mm

Pitch : 5 mm

Minimum Operating Temperature : -20˚C

Profile : 5M

Contitech Timing Belt 1610 mm Length 85 mm Width, 1610-14M-85

Ships within 120 days

Contitech Timing Belt 1610 mm Length 85 mm Width, 1610-14M-85

By Contitech

₹69,619

Contitech Timing Belt 180 Teeth 1440 mm Length 50 mm Width, 1440 8M 50

Ships within 120 days

Contitech Timing Belt Rubber 50 mm Width 8 mm Pitch 8M Profile (Length: 880 - 1440 mm)

By Contitech

₹14,159 - ₹18,879

The ContiTech Timing Belt Rubber 50 mm Width 8 mm Pitch 8M Profile (Length: 880 - 1440 mm) is designed for compatible synchronous drive systems that require a rubber timing belt with a 50 mm width. Its 8M profile uses an 8 mm tooth pitch, which must match the pulley teeth in the intended drive arrangement. The specified length range of 880 mm to 1440 mm provides options for installations requiring belt lengths within these limits. The combination of a wider belt, metric tooth pitch, and rubber construction helps distinguish this product from other timing belt variants. The ContiTech Timing Belt Rubber 50 mm Width 8 mm Pitch 8M Profile (Length: 880 - 1440 mm) can be considered for compatible industrial machinery and mechanical transmission applications. Selection should be based on the complete drive specification, including the required length, belt width, tooth profile, pulley dimensions, and available installation space. Before ordering, compare the product details with the existing belt designation or equipment documentation. Confirm that the rubber construction meets the needs of the intended operating environment. Careful verification helps identify a compatible belt and supports correct fitment in the drive system.

Type of Product : Timing Belt

Maximum Operating Temperature : +100˚C

Width : 50 mm

Pitch : 8 mm

Minimum Operating Temperature : -20˚C

Profile : 8M

Contitech Timing Belt 180 Teeth 1440 mm Length 20 mm Width, 1440 8M 20

Ships within 120 days

Contitech Timing Belt Rubber 20 mm Width 8 mm Pitch 8M Profile (Length: 480 - 2800 mm)

By Contitech

₹4,011 - ₹16,519

The ContiTech Timing Belt Rubber 20 mm Width 8 mm Pitch 8M Profile (Length: 480 - 2800 mm) is intended for synchronous drive systems requiring a rubber timing belt with a 20 mm width. Its 8M profile features an 8 mm tooth pitch, which is important for matching the belt to compatible toothed pulleys. The specified length range of 480 mm to 2800 mm offers different sizing options for drive assemblies with varying belt-path requirements. The rubber material, tooth profile, and dimensional details help distinguish this variant from polyurethane belts and other timing belts available in different widths and lengths. The ContiTech Timing Belt Rubber 20 mm Width 8 mm Pitch 8M Profile (Length: 480 - 2800 mm) can be evaluated for compatible industrial machinery and mechanical transmission applications. Correct belt selection depends on matching the tooth profile, width, required length, and pulley arrangement. Before ordering, review the existing belt markings and equipment specifications to confirm the required dimensions. Consider the application's operating conditions and ensure the selected construction is suitable for the intended use. These checks help identify the correct variant for installation, maintenance, or replacement while supporting compatibility with the existing drive system.

Type of Product : Timing Belt

Maximum Operating Temperature : +100˚C

Width : 20 mm

Pitch : 8 mm

Minimum Operating Temperature : -20˚C

Profile : 8M

Contitech Timing Belt 300 Teeth 1500 mm Length 15 mm Width, 1500 5M 15

Ships within 120 days

Contitech Timing Belt Rubber 15 mm Width 5 mm Pitch 5M Profile (Length: 800 - 2000 mm)

By Contitech

₹4,955 - ₹7,315

The ContiTech Timing Belt Rubber 15 mm Width 5 mm Pitch 5M Profile (Length: 800 - 2000 mm) is intended for synchronous drive systems requiring a rubber timing belt with a 15 mm width and a 5M tooth profile. The 5 mm pitch is a key measurement for ensuring compatibility with the corresponding toothed pulleys. Its length range of 800 mm to 2000 mm provides options for drive layouts requiring longer belt dimensions. The stated material and profile help identify the product when comparing different timing belt types for industrial machinery, equipment servicing, or replacement requirements. The ContiTech Timing Belt Rubber 15 mm Width 5 mm Pitch 5M Profile (Length: 800 - 2000 mm) can be evaluated for compatible machinery and mechanical assemblies that use the specified 5M profile. Before selection, check the required belt length, pulley tooth spacing, belt width, and available installation space. Confirm that the existing drive is designed for this profile and that the rubber material meets the operating requirements. Refer to the equipment documentation or existing belt markings when verifying the part. This approach helps buyers choose the correct variant for the intended application and supports appropriate belt installation.

Type of Product : Timing Belt

Maximum Operating Temperature : +100˚C

Width : 15 mm

Pitch : 5 mm

Minimum Operating Temperature : -20˚C

Profile : 5M

Contitech Timing Belt 1350 mm Length 15 mm Width, 1350 5M 15

Ships within 120 days

Contitech Timing Belt 1350 mm Length 15 mm Width, 1350 5M 15

By Contitech

₹6,961

Contitech Timing Belt 300 Teeth 2400 mm Length 20 mm Width, 2400 8M 20

Ships within 120 days

Contitech Timing Belt 300 Teeth 2400 mm Length 20 mm Width, 2400 8M 20

By Contitech

₹14,159

Contitech Timing Belt 50 Teeth 254 mm Length 9.4 mm Width, 100 XL 037

Ships within 120 days

Contitech Timing Belt Rubber 9.4 mm Width 5.08 mm Pitch XL Profile (Length: 125.4 - 635 mm)

By Contitech

₹766 - ₹1,651

The ContiTech Timing Belt Rubber 9.4 mm Width 5.08 mm Pitch XL Profile (Length: 125.4 - 635 mm) is a rubber timing belt specified for synchronous mechanical drive systems using the XL profile. Its 9.4 mm width and 5.08 mm tooth pitch are key measurements for selecting a belt that matches the corresponding pulley geometry. The stated length range of 125.4 mm to 635 mm provides sizing options for compatible drive arrangements. The XL profile distinguishes this belt from metric 3M, 5M, and 8M variants, making accurate profile identification important when sourcing a replacement. The ContiTech Timing Belt Rubber 9.4 mm Width 5.08 mm Pitch XL Profile (Length: 125.4 - 635 mm) can be considered for compatible machinery and mechanical systems designed for an XL-profile timing belt. Before ordering, verify the required length, belt width, tooth pitch, pulley profile, and mounting arrangement. Check the existing belt identification or equipment specifications to confirm that the XL profile is required. Review the application's operating conditions and material requirements before final selection. Confirming the complete specification helps avoid mismatches and supports proper integration into the intended drive system.

Type of Product : Timing Belt

Maximum Operating Temperature : +100˚C

Width : 9.4 mm

Pitch : 5.08 mm

Minimum Operating Temperature : -20˚C

Profile : XL

Contitech Timing Belt 73 Teeth 182.5 mm Length 6 mm Width, 6 / T2.5 / 182.5 SS

Ships within 120 days

Contitech Timing Belt Polyurethane 6 mm Width 2.5 mm Pitch T2,5 Profile (Length: 120 - 1300 mm)

By Contitech

₹1,769 - ₹7,433

The ContiTech Timing Belt Polyurethane 6 mm Width 2.5 mm Pitch T2,5 Profile (Length: 120 - 1300 mm) is a polyurethane timing belt intended for compatible synchronous drives that require a narrow belt and fine tooth spacing. Its 6 mm width and 2.5 mm pitch identify important dimensions for matching the belt to the corresponding pulley profile. The length range of 120 mm to 1300 mm offers several sizing options for compact or longer drive arrangements designed around this specification. Its polyurethane material and T2,5 profile distinguish it from belts using larger pitches or different construction materials. The ContiTech Timing Belt Polyurethane 6 mm Width 2.5 mm Pitch T2,5 Profile (Length: 120 - 1300 mm) can be evaluated for compatible compact mechanisms, precision equipment, and other systems designed for a matching T2,5 drive. Confirm the required length, tooth profile, width, and pulley dimensions before purchase. Check that the belt's material and construction suit the operating environment and the requirements of the equipment. Where the belt is being replaced, use the existing designation or manufacturer's documentation to verify the correct size. Careful dimensional matching supports proper installation and compatibility with the intended mechanical arrangement.

Type of Product : Timing Belt

Maximum Operating Temperature : +80˚C

Width : 6 mm

Pitch : 2.5 mm

Minimum Operating Temperature : -30˚C

Profile : T2,5

Contitech Timing Belt 102 Teeth 510 mm Length 10 mm Width, 10 / T5 / 510 SS

Ships within 120 days

Contitech Timing Belt Polyurethane 10 mm Width 5 mm Pitch T5 Profile (Length: 365 - 690 mm)

By Contitech

₹2,713 - ₹5,663

The ContiTech Timing Belt Polyurethane 10 mm Width 5 mm Pitch T5 Profile (Length: 365 - 690 mm) is designed for compatible mechanical systems requiring a polyurethane timing belt with a 10 mm width. Its T5 profile features a 5 mm tooth pitch, providing a key dimension for matching the belt with the correct toothed pulleys. The specified length range of 365 mm to 690 mm offers different sizing options for drive assemblies designed around these measurements. Its material, width, pitch, and length provide clear identification details when comparing timing belts for equipment installation or replacement. The ContiTech Timing Belt Polyurethane 10 mm Width 5 mm Pitch T5 Profile (Length: 365 - 690 mm) can be considered for machinery and mechanical assemblies that use a compatible T5 synchronous drive. Correct selection requires more than checking the overall length; the pulley profile, belt width, and installation arrangement must also match. Before ordering, verify the required belt dimensions against the equipment documentation or the existing belt designation. Review the operating conditions and material requirements for the intended application as well. This helps identify a suitable belt variant for the drive system.

Type of Product : Timing Belt

Maximum Operating Temperature : +80˚C

Width : 10 mm

Pitch : 5 mm

Minimum Operating Temperature : -30˚C

Profile : T5

Contitech Timing Belt 156 Teeth 780 mm Length 10 mm Width, 10 / T5 / 780 SS

Ships within 120 days

Contitech Timing Belt Polyurethane 10 mm Width 5 mm Pitch T5 Profile (Length: 700 - 1500 mm)

By Contitech

₹4,011 - ₹10,265

The ContiTech Timing Belt Polyurethane 10 mm Width 5 mm Pitch T5 Profile (Length: 700 - 1500 mm) is intended for compatible synchronous drive arrangements that require a polyurethane belt with a 10 mm width. The T5 profile specifies a 5 mm tooth pitch, which must match the pulley teeth to support correct engagement. With a listed length range of 700 mm to 1500 mm, this variant provides options for drive layouts requiring longer belt dimensions than compact installations. The specified profile and material help distinguish it from other timing belt designs used in mechanical transmission systems. The ContiTech Timing Belt Polyurethane 10 mm Width 5 mm Pitch T5 Profile (Length: 700 - 1500 mm) can be evaluated for suitable industrial machinery, automated mechanisms, and other equipment designed for T5 belt drives. When selecting a belt, consider the complete configuration, including pulley tooth profile, required length, belt width, centre distance, and installation space. Check the material specification against the application's requirements and confirm the correct variant before placing an order. Using the equipment's technical documentation or existing belt markings can help avoid selection errors and support appropriate replacement planning.

Type of Product : Timing Belt

Maximum Operating Temperature : +80˚C

Width : 10 mm

Pitch : 5 mm

Minimum Operating Temperature : -30˚C

Profile : T5

Contitech Timing Belt 168 Teeth 840 mm Length 16 mm Width, 16 / T5 / 840 SS

Ships within 120 days

Contitech Timing Belt Polyurethane 16 mm Width 5 mm Pitch T5 Profile (Length: 505 - 1500 mm)

By Contitech

₹5,663 - ₹12,979

The ContiTech Timing Belt Polyurethane 16 mm Width 5 mm Pitch T5 Profile (Length: 505 - 1500 mm) is designed for synchronous transmission applications requiring a polyurethane belt with a width of 16 mm. The T5 profile has a 5 mm tooth pitch, a defining dimension when choosing a belt for a matching pulley system. Its specified length range of 505 mm to 1500 mm provides options for a variety of drive layouts within the stated limits. These dimensional details help distinguish this product from shorter T5 variants and timing belts with different widths or profiles. The ContiTech Timing Belt Polyurethane 16 mm Width 5 mm Pitch T5 Profile (Length: 505 - 1500 mm) can be considered for compatible mechanical equipment and industrial drive assemblies that use a matching T5 configuration. The selected belt must meet the system's dimensional and operating requirements, including the required length, pulley profile, belt width, and installation arrangement. Check the existing belt identification or equipment specifications before ordering. Confirm the material requirements for the application and ensure the selected variant matches the intended drive. These checks help support appropriate installation and avoid choosing an incompatible belt.

Type of Product : Timing Belt

Maximum Operating Temperature : +80˚C

Width : 16 mm

Pitch : 5 mm

Minimum Operating Temperature : -30˚C

Profile : T5

Contitech Timing Belt 56 Teeth 280 mm Length 16 mm Width, 16 / T5 / 280 SS

Ships within 120 days

Contitech Timing Belt Polyurethane 16 mm Width 5 mm Pitch T5 Profile (Length: 165 - 500 mm)

By Contitech

₹3,893 - ₹7,315

The ContiTech Timing Belt Polyurethane 16 mm Width 5 mm Pitch T5 Profile (Length: 165 - 500 mm) is a polyurethane timing belt specified for synchronous drive systems that use a 16 mm wide belt and a T5 tooth profile. Its 5 mm pitch is a key measurement for matching the belt to compatible pulleys. The length range of 165 mm to 500 mm provides options for compact mechanical assemblies that require belt dimensions within these limits. The product's material, width, pitch, and length help identify the correct variant when reviewing equipment requirements or sourcing replacement components. The ContiTech Timing Belt Polyurethane 16 mm Width 5 mm Pitch T5 Profile (Length: 165 - 500 mm) may be considered for compatible machinery, compact drives, and positioning mechanisms designed for T5 belt engagement. Before selection, verify the exact required length, pulley tooth geometry, belt width, and available installation space. Confirm that polyurethane construction is appropriate for the intended operating conditions. Matching these specifications with the equipment documentation helps avoid incompatibility between the belt and pulley arrangement. Careful selection supports correct fitment and helps maintain the intended movement relationship between the drive components.

Type of Product : Timing Belt

Maximum Operating Temperature : +80˚C

Width : 16 mm

Pitch : 5 mm

Minimum Operating Temperature : -30˚C

Profile : T5

Contitech Timing Belt 42 Teeth 210 mm Length 10 mm Width, 10 / T5 / 210 SS

Ships within 120 days

Contitech Timing Belt Polyurethane 10 mm Width 5 mm Pitch T5 Profile (Length: 150 - 355 mm)

By Contitech

₹2,477 - ₹3,775

The ContiTech Timing Belt Polyurethane 10 mm Width 5 mm Pitch T5 Profile (Length: 150 - 355 mm) is a polyurethane belt intended for compatible synchronous transmission systems. It features a 10 mm width and a T5 profile with a 5 mm tooth pitch. These dimensions are important when matching the belt to the corresponding pulley geometry and required drive arrangement. The available length range of 150 mm to 355 mm makes this variant relevant to compact drive layouts designed around the specified measurements. Its polyurethane material and T5 profile distinguish it from rubber timing belts and other profile types. The ContiTech Timing Belt Polyurethane 10 mm Width 5 mm Pitch T5 Profile (Length: 150 - 355 mm) can be evaluated for compatible machinery, positioning mechanisms, and other equipment using a matching T5 timing belt drive. Before purchasing, verify the exact belt length, tooth pitch, width, pulley compatibility, and installation requirements. Ensure the selected material and construction are suitable for the operating environment and intended use. The length alone is not enough to establish compatibility, so the existing belt designation or equipment documentation should also be checked. Careful selection supports correct fitting and dependable integration into the designed drive system.

Type of Product : Timing Belt

Maximum Operating Temperature : +80˚C

Width : 10 mm

Pitch : 5 mm

Minimum Operating Temperature : -30˚C

Profile : T5

Contitech Timing Belt 104 Teeth 312 mm Length 9 mm Width, HTD 312-3M-09

Ships within 120 days

Contitech Timing Belt Rubber 9 mm Width 3 mm Pitch 3M Profile (Length: 144 - 357 mm)

By Contitech

₹1,415 - ₹1,651

The ContiTech Timing Belt Rubber 9 mm Width 3 mm Pitch 3M Profile (Length: 144 - 357 mm) is specified for synchronous drive systems that require a rubber timing belt with a 9 mm width. Its 3M profile features a 3 mm tooth pitch, providing an important reference for pulley matching. The available length range of 144 mm to 357 mm makes it suitable for consideration in compact drive layouts designed around these measurements. The combination of width, pitch, length, and rubber construction helps identify the correct belt when comparing similar components for equipment maintenance or replacement. The ContiTech Timing Belt Rubber 9 mm Width 3 mm Pitch 3M Profile (Length: 144 - 357 mm) can be evaluated for compatible compact machinery, automated mechanisms, and other applications using a matching 3M timing belt. To ensure compatibility, confirm the exact belt length, pulley tooth profile, required width, and installation dimensions. Review the existing belt designation or equipment documentation before selecting a replacement. The operating conditions should also be considered when checking material suitability. Verifying these specifications helps support proper fitting and alignment with the intended mechanical transmission arrangement.

Type of Product : Timing Belt

Maximum Operating Temperature : +100˚C

Width : 9 mm

Pitch : 3 mm

Minimum Operating Temperature : -20˚C

Profile : 3M

Contitech Timing Belt 58 Teeth 174 mm Length 6 mm Width, HTD 174-3M-06

Ships within 120 days

Contitech Timing Belt Rubber 6 mm Width 3 mm Pitch 3M Profile (Length: 144 - 357 mm)

By Contitech

₹1,014 - ₹1,297

The ContiTech Timing Belt Rubber 6 mm Width 3 mm Pitch 3M Profile (Length: 144 - 357 mm) is a compact rubber timing belt designed for compatible synchronous drive arrangements. Its 6 mm width and 3 mm tooth pitch are important dimensions when matching the belt to the corresponding pulley geometry. The length range of 144 mm to 357 mm provides sizing options for compact mechanisms requiring a belt within these limits. Its rubber material and 3M profile distinguish it from polyurethane T-profile belts and other rubber timing belts with larger tooth pitches. The ContiTech Timing Belt Rubber 6 mm Width 3 mm Pitch 3M Profile (Length: 144 - 357 mm) may be considered for compact machinery and mechanical assemblies designed for a matching 3M belt drive. Before purchase, verify the required length, width, tooth pitch, pulley compatibility, and installation space. Check the existing belt markings or equipment documentation to confirm the correct specification. Ensure that the selected material is appropriate for the operating requirements of the application. Matching these details helps reduce the risk of selecting an incompatible component and supports suitable installation in the intended drive system.

Type of Product : Timing Belt

Maximum Operating Temperature : +100˚C

Width : 6 mm

Pitch : 3 mm

Minimum Operating Temperature : -20˚C

Profile : 3M

Contitech Timing Belt 120 Teeth 960 mm Length 30 mm Width, 960 8M 30 CXP

Ships within 120 days

Contitech Timing Belt 30 mm Width 8 mm Pitch 8M Profile (Length: 480 - 2800 mm)

By Contitech

₹7,079 - ₹24,779

The ContiTech Timing Belt 30 mm Width 8 mm Pitch 8M Profile (Length: 480 - 2800 mm) is intended for mechanical drive arrangements that require synchronous movement and a belt width of 30 mm. Its 8M profile has an 8 mm tooth pitch, a key dimensional feature for matching the belt with compatible toothed pulleys. The length range of 480 mm to 2800 mm offers flexibility when identifying a suitable size for different drive layouts. This combination of profile, width, and length helps distinguish the product from other timing belt variants and supports accurate selection for machinery requirements. The ContiTech Timing Belt 30 mm Width 8 mm Pitch 8M Profile (Length: 480 - 2800 mm) can be evaluated for compatible industrial drives, machine assemblies, and equipment maintenance tasks. A suitable timing belt must correspond to the pulley profile and the dimensional requirements of the complete drive system. Before purchasing, confirm the required length, tooth pitch, belt width, pulley compatibility, and installation arrangement. Also consider the operating conditions specified for the intended application. Checking these details helps reduce the risk of choosing an incorrectly sized belt and supports proper integration into the existing mechanism.

Type of Product : Timing Belt

Maximum Operating Temperature : +100˚C

Width : 30 mm

Pitch : 8 mm

Minimum Operating Temperature : -20˚C

Profile : 8M

Contitech Timing Belt 120 Teeth 960 mm Length 20 mm Width, 960 8M 20 CXP

Ships within 120 days

Contitech Timing Belt 20 mm Width 8 mm Pitch 8M Profile (Length: 480 - 2800 mm)

By Contitech

₹4,483 - ₹16,519

The ContiTech Timing Belt 20 mm Width 8 mm Pitch 8M Profile (Length: 480 - 2800 mm) is designed for synchronous power transmission in compatible mechanical drive systems. Its 8M profile features an 8 mm tooth pitch, while the 20 mm belt width defines the contact width for selecting a matching pulley arrangement. Timing belts are used where coordinated movement between drive and driven components is required. The specified length range of 480 mm to 2800 mm provides multiple sizing options within this product range, allowing selection according to the drive layout and required belt path. Correct profile and dimensional matching are essential for suitable operation. The ContiTech Timing Belt 20 mm Width 8 mm Pitch 8M Profile (Length: 480 - 2800 mm) can be considered for compatible industrial machinery, automated equipment, and other mechanical transmission applications. Before selecting a variant, verify the required belt length, pulley tooth profile, belt width, centre distance, and operating requirements. Ensure that the selected belt matches the existing drive configuration rather than relying on length alone. Reviewing these specifications helps buyers identify the appropriate variant for maintenance, replacement, or equipment assembly.

Type of Product : Timing Belt

Maximum Operating Temperature : +100˚C

Width : 20 mm

Pitch : 8 mm

Minimum Operating Temperature : -20˚C

Profile : 8M

Contitech Timing Belt 110 Teeth 880 mm Length 50 mm Width, 880 8M 50 CXP

Ships within 120 days

Contitech Timing Belt 50 mm Width 8 mm Pitch 8M Profile (Length: 480 - 2800 mm)

By Contitech

₹11,799 - ₹41,299

The ContiTech Timing Belt 50 mm Width 8 mm Pitch 8M Profile (Length: 480 - 2800 mm) is designed for compatible synchronous drive systems requiring a wider 50 mm belt. Its 8M profile identifies a tooth pitch of 8 mm, which must match the corresponding toothed pulleys for correct engagement. The stated length range extends from 480 mm to 2800 mm, providing different sizing options for drive systems with varying belt-path requirements. Width, pitch, and length are important selection factors because they influence the belt's compatibility with the pulley arrangement and the space available in the machinery. The ContiTech Timing Belt 50 mm Width 8 mm Pitch 8M Profile (Length: 480 - 2800 mm) may be considered for industrial machinery and mechanical equipment designed around this belt specification. It is important to select the belt based on the full drive configuration, not just its overall length. Before ordering, check the existing belt designation, pulley tooth profile, required width, length, and installation dimensions. Confirm that the chosen variant meets the operating requirements of the equipment. Careful specification matching supports appropriate replacement planning and helps ensure that the belt fits the intended transmission system.

Type of Product : Timing Belt

Maximum Operating Temperature : +100˚C

Width : 50 mm

Pitch : 8 mm

Minimum Operating Temperature : -20˚C

Profile : 8M

Contitech Timing Belt 40 Teeth 381 mm Length 12.7 mm Width, 150 L 050

Ships within 120 days

Contitech Timing Belt Rubber 12.7 mm Width 9.5 mm Pitch L Profile (Length: 314.33 - 1370 mm)

By Contitech

₹1,769 - ₹3,657

The ContiTech Timing Belt Rubber 12.7 mm Width 9.5 mm Pitch L Profile (Length: 314.33 - 1370 mm) is a rubber timing belt specified for synchronous transmission systems using an L profile. Its 12.7 mm width and 9.5 mm pitch are important identification details when matching the belt to the appropriate toothed pulleys. The stated length range of 314.33 mm to 1370 mm provides sizing options for compatible drive layouts. The rubber construction distinguishes this product from polyurethane timing belt variants and should be considered when checking the replacement specification for an existing drive. The ContiTech Timing Belt Rubber 12.7 mm Width 9.5 mm Pitch L Profile (Length: 314.33 - 1370 mm) can be considered for compatible industrial machinery and mechanical equipment designed around the L-profile belt standard. Before ordering, confirm the required length, belt width, tooth pitch, pulley compatibility, and operating conditions. Check the equipment documentation or existing belt markings to ensure the specified profile is correct. Material compatibility should also be considered when selecting a replacement for a particular application. Reviewing all key specifications helps buyers identify the appropriate belt and supports correct fitment within the drive system.

Type of Product : Timing Belt

Maximum Operating Temperature : +100˚C

Width : 12.7 mm

Pitch : 9.5 mm

Minimum Operating Temperature : -20˚C

Profile : L

Contitech Timing Belt 64 Teeth 609.5 mm Length 25.4 mm Width, 240 L 100

Ships within 120 days

Contitech Timing Belt Rubber 25.4 mm Width 9.5 mm Pitch L Profile (Length: 571.5 - 1370 mm)

By Contitech

₹3,185 - ₹6,017

The ContiTech Timing Belt Rubber 25.4 mm Width 9.5 mm Pitch L Profile (Length: 571.5 - 1370 mm) is designed for mechanical drive arrangements that require a rubber timing belt with an L profile. Its 25.4 mm width provides the specified belt dimension, while the 9.5 mm pitch identifies the tooth spacing used for pulley compatibility. The available length range of 571.5 mm to 1370 mm offers multiple sizing options for compatible systems. These measurements are important for distinguishing this belt from other L-profile variants and from products with different tooth pitches or materials. The ContiTech Timing Belt Rubber 25.4 mm Width 9.5 mm Pitch L Profile (Length: 571.5 - 1370 mm) can be considered for compatible industrial equipment and synchronous transmission systems designed around the L profile. To select the correct variant, check the required belt length, width, tooth pitch, and pulley dimensions. Verify the specification using the equipment manual or existing belt markings before ordering. Also consider the application's operating conditions and material requirements. Accurate dimensional matching helps support suitable installation and ensures that the selected belt corresponds to the intended drive configuration.

Type of Product : Timing Belt

Maximum Operating Temperature : +100˚C

Width : 25.4 mm

Pitch : 9.5 mm

Minimum Operating Temperature : -20˚C

Profile : L

Contitech Timing Belt 340 Teeth 4310 mm Length 25.4 mm Width, 1700 H 100

Ships within 120 days

Contitech Timing Belt Rubber 25.4 mm Width 12.7 mm Pitch H Profile (Length: 609.5 - 4310 mm)

By Contitech

₹4,601 - ₹18,879

The ContiTech Timing Belt Rubber 25.4 mm Width 12.7 mm Pitch H Profile (Length: 609.5 - 4310 mm) is a rubber timing belt specified for compatible synchronous drive systems using an H profile. Its 25.4 mm width and 12.7 mm tooth pitch are key dimensions for matching the belt with the appropriate pulley arrangement. The stated length range of 609.5 mm to 4310 mm provides options for drive layouts requiring different belt lengths within these limits. The H profile and rubber construction distinguish this product from metric-pitch timing belts and other rubber belt configurations. The ContiTech Timing Belt Rubber 25.4 mm Width 12.7 mm Pitch H Profile (Length: 609.5 - 4310 mm) may be considered for compatible industrial machinery and mechanical power transmission applications designed for this profile. Before selecting a variant, confirm the required length, belt width, tooth pitch, pulley compatibility, and installation dimensions. Consult the equipment documentation or check the existing belt designation to ensure the profile is correct. The selected belt should also meet the operating requirements of the application. Verifying these details helps reduce the risk of dimensional mismatch and supports appropriate fitting in the drive assembly.

Type of Product : Timing Belt

Maximum Operating Temperature : +100˚C

Width : 25.4 mm

Pitch : 12.7 mm

Minimum Operating Temperature : -20˚C

Profile : H

Contitech Timing Belt 76 Teeth 723.5 mm Length 19.05 mm Width, 285 L 075

Ships within 120 days

Contitech Timing Belt Rubber 19.05 mm Width 9.5 mm Pitch L Profile (Length: 314.33 - 1524 mm)

By Contitech

₹2,359 - ₹6,371

The ContiTech Timing Belt Rubber 19.05 mm Width 9.5 mm Pitch L Profile (Length: 314.33 - 1524 mm) is designed for synchronous mechanical drives that require a rubber belt with an L profile. Its 19.05 mm width and 9.5 mm tooth pitch are essential dimensions for identifying a compatible belt and matching it with the appropriate toothed pulleys. The stated length range of 314.33 mm to 1524 mm provides sizing options for drive arrangements that fall within these limits. Its rubber construction and dimensional specifications distinguish it from belts with narrower widths, different pitches, or polyurethane material. The ContiTech Timing Belt Rubber 19.05 mm Width 9.5 mm Pitch L Profile (Length: 314.33 - 1524 mm) can be considered for compatible industrial equipment and mechanical transmission systems designed for an L-profile timing belt. Before purchasing, verify the required belt length, pulley profile, width, tooth pitch, and installation dimensions. Check the existing belt identification or equipment documentation to confirm the correct specification. It is also important to review the operating requirements of the intended application. Matching the complete set of dimensions helps identify a suitable replacement and supports proper integration into the drive system.

Type of Product : Timing Belt

Maximum Operating Temperature : +100˚C

Width : 19.05 mm

Pitch : 9.5 mm

Minimum Operating Temperature : -20˚C

Profile : L

Page 1 of 1 results

Contitech Timing Belt

Top Selling Contitech Timing Belt Products Price List for November 2026