Home /
All Brands /
Damor /
Hydraulics and Pneumatics

Have a question? Call us now at +91 9650660070

Damor Hydraulics and Pneumatics

Showing 18 out of 18 products

Sort by

Damor 0.5 LPM 0.5L SG-CW High Pressure Water Spray Gun

Ships within 4 days

Damor 0.5 LPM 0.5L SG-CW High Pressure Water Spray Gun

By Damor

₹636

The Damor 0.5 LPM 0.5L SG-CW High Pressure Water Spray Gun is a powerful and efficient tool designed for various cleaning and spraying applications. With a flow rate of 0.5 liters per minute (LPM), it delivers a steady and consistent stream of high-pressure water, allowing you to tackle tough cleaning tasks with ease. This spray gun is equipped with a 0.5-liter capacity, providing an ample amount of water for continuous spraying without the need for frequent refills. The high-pressure capability ensures effective cleaning, making it ideal for removing stubborn dirt, grime, and debris from a variety of surfaces. The SG-CW model is specifically designed for high-pressure applications, making it suitable for both professional and domestic use. Its ergonomic design ensures comfortable handling and allows for precise control during operation. The gun features a sturdy construction, ensuring durability and long-lasting performance even in demanding environments. With the Damor 0.5 LPM 0.5L SG-CW High Pressure Water Spray Gun, you can efficiently clean outdoor areas, such as driveways, patios, and vehicles, as well as tackle industrial cleaning tasks. Its versatility makes it a valuable tool for homeowners, car wash facilities, maintenance crews, and other professionals who require a reliable and efficient cleaning solution.

Damor 6.35 mm (1/4 inch) Mini Regulator Without Gauge AFC-2000 Airtac Type

Ships within 4 days

Damor 6.35 mm (1/4 inch) Mini Regulator Without Gauge AFC-2000 Airtac Type

By Damor

₹730

A Damor 1/4 Inch Mini Regulator Without Gauge AFC-2000 Airtac Type also known as a miniature pressure regulator, is a compact device that regulates and controls the pressure of gases or liquids in various applications. It is typically smaller than standard regulators and is designed for low-flow or low-pressure systems. Here's some information about mini regulators: Purpose: The primary function of a mini regulator is to maintain a consistent and controlled pressure level in a system. It ensures that the pressure of the gas or liquid being delivered remains within a specified range, regardless of fluctuations in the input pressure. Design: Mini regulators are compact and lightweight, making them suitable for applications where space is limited or portability is required. They typically consist of a body or housing, an adjustment knob or screw, and an internal diaphragm or piston mechanism. The adjustment knob allows users to set the desired pressure level, and the internal agency regulates the flow to maintain the set pressure. Pressure Range and Flow Capacity: Mini regulators are designed for low-pressure applications ranging from a few psi (pounds per square inch) to around 100 psi. The flow capacity of mini regulators is usually lower than standard regulators, making them suitable for low-flow systems or applications requiring precise control. Applications: Mini regulators find applications in various industries and systems, including: Analytical and Laboratory Equipment: They are commonly used in gas chromatography, mass spectrometry, and other analytical instruments that require precise control of gas pressures. Medical Devices: Mini regulators are utilised in medical devices such as gas analysers, anaesthesia machines, and respiratory equipment to ensure accurate pressure control. Gas Detection Systems: They are employed in gas detection and monitoring systems to regulate the flow and pressure of calibration gases. Pneumatic Systems: Mini regulators can be used in small-scale pneumatic systems, such as robotics, automation, and control systems. Advantages: Some advantages of mini regulators include: Compact and lightweight design for space-constrained applications or portable systems. Precise pressure control for applications requiring accuracy and stability. Easy adjustment of pressure settings using the adjustment knob or screw. Durable construction and reliable performance. Cost-effective solution for low-flow or low-pressure applications. Maintenance: Maintenance requirements for mini regulators are generally minimal. However, regular inspection and cleaning are recommended to ensure optimal performance and to prevent any clogging or debris buildup that may affect the regulator's operation. When selecting a mini regulator, consider factors such as the desired pressure range, flow capacity, compatibility with the gas or liquid being regulated, and the specific requirements of your application. It's essential to look at the manufacturer's specifications and guidelines to ensure the selected mini regulator suits your needs.

Damor 6.35 mm (1/4 inch) Air Pressure Reducing Valves (SMC Type) AR2000-02

Ships within 4 days

Damor 6.35 mm (1/4 inch) Air Pressure Reducing Valves (SMC Type) AR2000-02

By Damor

₹589

A Damor 1/4 Inch Air Pressure Reducing Valves (SMC Type) AR2000-02 is an electromechanical device used to control the flow of fluids or gases by opening or closing a valve using an electrical signal. It consists of a coil, a movable ferromagnetic plunger or disc, and a valve seat. Here are some key features and information about solenoid valves: Operation: Solenoid valves work on the principle of electromagnetism. When an electric current passes through the coil, it generates a magnetic field that attracts the movable plunger or disc, causing it to move and open or close the valve. The flow is controlled by the position of the plunger in relation to the valve seat. Types of Solenoid Valves: Solenoid valves come in various types, each designed for specific applications: Two-Way Valves: These valves have two ports, an inlet, and an outlet. They control the flow between the inlet and outlet by either opening or closing the valve. Three-Way Valves: These valves have three ports, typically an inlet, an outlet, and a common port. They can divert flow between two outlets or mix two incoming flows. Four-Way Valves: These valves have four ports and are used in applications where flow direction needs to be changed or redirected. Normally Open (NO) and Normally Closed (NC): Solenoid valves can be either normally open, where the valve is open in the de-energized state and closes when energized, or normally closed, where the valve is closed in the de-energized state and opens when energized. Applications: Solenoid valves are widely used in various industries and applications, including: HVAC (Heating, Ventilation, and Air Conditioning) systems: Solenoid valves control the flow of refrigerant, hot water, or chilled water in HVAC systems. Industrial Automation: Solenoid valves are used in automated processes to control the flow of liquids or gases, such as in water treatment, oil and gas, chemical processing, and manufacturing industries. Irrigation Systems: Solenoid valves regulate the flow of water in irrigation systems, allowing for automated control of watering schedules. Medical and Laboratory Equipment: Solenoid valves are used in medical devices and laboratory equipment to control the flow of fluids or gases. Advantages: Solenoid valves offer several advantages, including: Fast and precise operation: Solenoid valves can open and close quickly, allowing for rapid control of fluid or gas flow. Remote operation: They can be controlled remotely using electrical signals, making them suitable for automation and integration into control systems. Reliability: Solenoid valves are known for their durability and long service life when properly maintained. Energy efficiency: They consume power only when opening or closing, reducing energy consumption. Wide range of sizes and configurations: Solenoid valves are available in various sizes and configurations to suit different application requirements. Maintenance: Regular maintenance of solenoid valves involves cleaning the valve seat, inspecting and cleaning the plunger or disc, and checking for any signs of damage or leaks. It's important to follow the manufacturer's recommendations for maintenance and ensure that the valve is properly installed and calibrated. When selecting a solenoid valve, consider factors such as the required flow rate, pressure rating, fluid compatibility, electrical specifications, and environmental conditions. Consulting with a valve supplier or industry expert can help in choosing the right solenoid valve for your specific application.

Damor 12.7 mm (1/2 Inch) Filter Regulator BFR-4000

Ships within 4 days

Damor 12.7 mm (1/2 Inch) Filter Regulator BFR-4000

By Damor

₹1,061

A Damor 1/8 Inch Non Return Valve CV01 also known as a check valve or one-way valve, is a type of valve that allows fluid or gas to flow in only one direction. It is designed to prevent backflow or reverse flow of the medium in a piping system. Here are some key features and functions of a non-return valve: Directional Flow: The primary function of a non-return valve is to ensure that fluid or gas flows in one direction only. It allows flow in the desired direction while preventing backflow in the opposite direction. Check Mechanism: Non-return valves typically employ a check mechanism that opens to allow forward flow and closes to prevent reverse flow. The check mechanism can be a swinging disc, a ball, a spring-loaded plunger, or other similar mechanisms. Various Types: Non-return valves come in different types, including swing check valves, ball check valves, spring check valves, and diaphragm check valves. Each type has its own design and mechanism for controlling flow. Installation Position: Non-return valves are typically installed in piping systems or equipment where backflow prevention is necessary. They are commonly found in water supply systems, HVAC systems, fuel systems, and many other applications. Maintenance and Reliability: Non-return valves are generally low-maintenance components. They are designed to be reliable, durable, and resistant to wear and tear. However, periodic inspection and cleaning may be necessary to ensure proper functioning. Pressure and Temperature Rating: Non-return valves are available in various pressure and temperature ratings to suit different applications. It is important to select a valve that can withstand the specific conditions of the system it will be installed in. Non-return valves play a crucial role in maintaining the integrity and efficiency of fluid and gas flow systems by preventing unwanted backflow. They are widely used in many industries and applications where unidirectional flow control is essential.

Related Searches

damor pneumatic vibrator

damor solenoid valve

damor filter regulator

Damor 6.35 mm (1/4") Mini Regulator Without Gauge AR-2000

Ships within 24 hrs

Damor 6.35 mm (1/4") Mini Regulator Without Gauge AR-2000

By Damor

₹435

A Damor 1/4" Mini Regulator Without Gauge AR-2000, also known as a miniature pressure regulator, is a compact device that regulates and controls the pressure of gases or liquids in various applications. It is typically smaller than standard regulators and is designed for low-flow or low-pressure systems. Here's some information about mini regulators: Purpose: The primary function of a mini regulator is to maintain a consistent and controlled pressure level in a system. It ensures that the pressure of the gas or liquid being delivered remains within a specified range, regardless of fluctuations in the input pressure. Design: Mini regulators are compact and lightweight, making them suitable for applications where space is limited or portability is required. They typically consist of a body or housing, an adjustment knob or screw, and an internal diaphragm or piston mechanism. The adjustment knob allows users to set the desired pressure level, and the internal agency regulates the flow to maintain the set pressure. Pressure Range and Flow Capacity: Mini regulators are designed for low-pressure applications ranging from a few psi (pounds per square inch) to around 100 psi. The flow capacity of mini regulators is usually lower than standard regulators, making them suitable for low-flow systems or applications requiring precise control. Applications: Mini regulators find applications in various industries and systems, including: Analytical and Laboratory Equipment: They are commonly used in gas chromatography, mass spectrometry, and other analytical instruments that require precise control of gas pressures. Medical Devices: Mini regulators are utilised in medical devices such as gas analysers, anaesthesia machines, and respiratory equipment to ensure accurate pressure control. Gas Detection Systems: They are employed in gas detection and monitoring systems to regulate the flow and pressure of calibration gases. Pneumatic Systems: Mini regulators can be used in small-scale pneumatic systems, such as robotics, automation, and control systems. Advantages: Some advantages of mini regulators include: Compact and lightweight design for space-constrained applications or portable systems. Precise pressure control for applications requiring accuracy and stability. Easy adjustment of pressure settings using the adjustment knob or screw. Durable construction and reliable performance. Cost-effective solution for low-flow or low-pressure applications. Maintenance: Maintenance requirements for mini regulators are generally minimal. However, regular inspection and cleaning are recommended to ensure optimal performance and to prevent any clogging or debris buildup that may affect the regulator's operation. When selecting a mini regulator, consider factors such as the desired pressure range, flow capacity, compatibility with the gas or liquid being regulated, and the specific requirements of your application. It's essential to look at the manufacturer's specifications and guidelines to ensure the selected mini regulator suits your needs.

Ships within 4 days

Damor 100°C Aluminium White Ball Pneumatic Vibrator

By Damor

₹1,002 - ₹1,132

The Damor Ball Pneumatic Vibrator is a specialized type of pneumatic vibrator designed for various industrial applications where controlled vibration is needed. As the name suggests, it typically consists of a ball inside a housing. When compressed air is supplied to the vibrator, it causes the ball to oscillate rapidly, creating mechanical vibrations. These vibrations can be utilized for tasks such as compacting, conveying, sieving, and agitating materials in bins, hoppers, pipes, and chutes. The Damor Ball Pneumatic Vibrator is known for its efficiency, durability, and reliability in industrial environments. It is often used in industries such as construction, mining, agriculture, pharmaceuticals, and food processing. Overall, the Damor Ball Pneumatic Vibrator is a valuable tool for enhancing productivity and efficiency in various industrial processes by facilitating the handling and processing of bulk materials.

Type of Product : Vibrator

Color : White

Material : Aluminium

Temperature Range : 100°C

Suitable For : Temperature up to 100C

Force : 30 N to 4050 N

Ships within 4 days

Damor 150℃ Rectangle Aluminium White Pneumatic Vibrator

By Damor

₹1,769 - ₹1,887

The Damor Pneumatic Vibrator is a device used to generate vibration in various industrial applications. It operates using compressed air to produce mechanical vibrations, which can be used for tasks such as compacting, conveying, sieving, and loosening materials in bins, hoppers, pipes, and chutes. These vibrators are commonly used in industries such as construction, mining, agriculture, pharmaceuticals, and food processing. They come in various sizes and designs to suit different applications and requirements. The Damor Pneumatic Vibrator is known for its robust construction, reliability, and efficiency. It is designed to withstand harsh operating conditions and provide consistent performance over time. Overall, the Damor Pneumatic Vibrator is a versatile tool that helps improve efficiency and productivity in a wide range of industrial processes by facilitating the handling and processing of bulk materials.

Type of Product : Vibrator

Color : White

Shape : Rectangle

Material : Aluminium

Temperature Range : 150℃

Finishing : Polished

Damor 12.7 mm (1/2 Inch) Square Drive 7000 RPM Air Impact Wrench Kit Spear FC-180 K

Ships within 3 days

Damor 1/2 inch Square Drive 7000 RPM Air Impact Wrench Kit

By Damor

₹3,657 - ₹4,837

The Damor 1/2 inch Square Drive 7000 RPM Air Impact Wrench Kit is a high-performance tool designed for professionals who require both power and precision in their work. Engineered for heavy-duty applications, this air impact wrench delivers a robust 7000 RPM, making it ideal for automotive repairs, construction, and industrial maintenance. Its 1/2 inch square drive provides a versatile fit for a range of sockets, ensuring compatibility with various fasteners. The wrench is constructed with durable materials to withstand the rigors of frequent use, and its ergonomic design ensures comfort during operation. The tool features a high-torque output, allowing users to efficiently tackle tough bolts and nuts with ease. The air impact wrench’s advanced engineering minimizes vibration and noise, contributing to a more comfortable working experience. Additionally, the Damor Air Impact Wrench Kit includes essential accessories for immediate use, such as impact sockets and a sturdy carrying case for convenient storage and transport. This kit is designed to meet the demands of professional technicians and mechanics, providing reliable performance and efficiency. Whether you’re working on vehicle repairs or industrial assembly, the Damor 1/2 inch Square Drive 7000 RPM Air Impact Wrench Kit is a dependable choice for achieving superior results.

Torque : 340 Nm

Type of Product : Air Impact Wrench Kit

Speed : 7000 RPM

Weight : Approx. 4 Kg

No Load Speed : 7000 RPM

Air Inlet : 12.7 mm

Square Drive (Inch) : 1/2"

Working Pressure : 6.3 Bar

Package Contains : 10 Pc Sockets: 9, 10, 11, 13,14,17,19,22,24,27 mm, 1 Pc - 1/2 inch Drive x 5 inch Extension Bar, 1 Pc Nipple, 1 Pc Mini Oiler

Damor 6.3 Bar Working Pressure 22000 RPM Air Die Grinder Kit, Spear FC-512 K

Ships within 3 days

Damor 6.3 Bar Working Pressure 22000 RPM Air Die Grinder Kit, Spear FC-512 K

By Damor

₹1,415

Enhance your grinding tasks with the Damor 6.3 Bar Working Pressure 22000 RPM Air Die Grinder Kit, Spear FC-512 K. This high-performance air die grinder is engineered to deliver exceptional speed and power, operating at an impressive 22000 RPM. Designed for precision and efficiency, the Damor Air Die Grinder Kit is ideal for intricate metalwork, deburring, and polishing applications. The 6.3 Bar working pressure ensures consistent and reliable performance, making it an indispensable tool for both professional workshops and DIY enthusiasts.
The Damor 6.3 Bar Working Pressure 22000 RPM Air Die Grinder Kit, Spear FC-512 K features an ergonomic design that enhances user comfort and control, reducing hand fatigue during extended use. Built with durability in mind, this air die grinder is constructed from high-quality materials to withstand rigorous use. The comprehensive kit includes essential attachments and accessories, offering versatility for a wide range of grinding tasks. Choose the Damor Air Die Grinder Kit for superior performance and precision, and experience the difference in your metalworking and finishing projects.

Ships within 4 days

Damor 1/4 Inch Solenoid Valve

By Damor

₹530 - ₹730

A Damor Solenoid Valves 4V-210-08 is an electromechanical device used to control the flow of fluids or gases by opening or closing a valve using an electrical signal. It consists of a coil, a movable ferromagnetic plunger or disc, and a valve seat. Here are some key features and information about solenoid valves: Operation: Solenoid valves work on the principle of electromagnetism. When an electric current passes through the coil, it generates a magnetic field that attracts the movable plunger or disc, causing it to move and open or close the valve. The flow is controlled by the position of the plunger in relation to the valve seat. Types of Solenoid Valves: Solenoid valves come in various types, each designed for specific applications: Two-Way Valves: These valves have two ports, an inlet, and an outlet. They control the flow between the inlet and outlet by either opening or closing the valve. Three-Way Valves: These valves have three ports, typically an inlet, an outlet, and a common port. They can divert flow between two outlets or mix two incoming flows. Four-Way Valves: These valves have four ports and are used in applications where flow direction needs to be changed or redirected. Normally Open (NO) and Normally Closed (NC): Solenoid valves can be either normally open, where the valve is open in the de-energized state and closes when energized, or normally closed, where the valve is closed in the de-energized state and opens when energized. Applications: Solenoid valves are widely used in various industries and applications, including: HVAC (Heating, Ventilation, and Air Conditioning) systems: Solenoid valves control the flow of refrigerant, hot water, or chilled water in HVAC systems. Industrial Automation: Solenoid valves are used in automated processes to control the flow of liquids or gases, such as in water treatment, oil and gas, chemical processing, and manufacturing industries. Irrigation Systems: Solenoid valves regulate the flow of water in irrigation systems, allowing for automated control of watering schedules. Medical and Laboratory Equipment: Solenoid valves are used in medical devices and laboratory equipment to control the flow of fluids or gases. Advantages: Solenoid valves offer several advantages, including: Fast and precise operation: Solenoid valves can open and close quickly, allowing for rapid control of fluid or gas flow. Remote operation: They can be controlled remotely using electrical signals, making them suitable for automation and integration into control systems. Reliability: Solenoid valves are known for their durability and long service life when properly maintained. Energy efficiency: They consume power only when opening or closing, reducing energy consumption. Wide range of sizes and configurations: Solenoid valves are available in various sizes and configurations to suit different application requirements. Maintenance: Regular maintenance of solenoid valves involves cleaning the valve seat, inspecting and cleaning the plunger or disc, and checking for any signs of damage or leaks. It's important to follow the manufacturer's recommendations for maintenance and ensure that the valve is properly installed and calibrated. When selecting a solenoid valve, consider factors such as the required flow rate, pressure rating, fluid compatibility, electrical specifications, and environmental conditions. Consulting with a valve supplier or industry expert can help in choosing the right solenoid valve for your specific application.

Thread Size : 1/4 Inch

Type of Product : Valve

Damor 12.7 mm (1/2 Inch) Solenoid Valve CS-720 (16kg)

Ships within 4 days

Damor 12.7 mm (1/2 Inch) Solenoid Valve CS-720 (16kg)

By Damor

₹1,132

A Damor 1/2 Inch Solenoid Valve CS-720 (16kg) is an electromechanical device used to control the flow of fluids or gases by opening or closing a valve using an electrical signal. It consists of a coil, a movable ferromagnetic plunger or disc, and a valve seat. Here are some key features and information about solenoid valves: Operation: Solenoid valves work on the principle of electromagnetism. When an electric current passes through the coil, it generates a magnetic field that attracts the movable plunger or disc, causing it to move and open or close the valve. The flow is controlled by the position of the plunger in relation to the valve seat. Types of Solenoid Valves: Solenoid valves come in various types, each designed for specific applications: Two-Way Valves: These valves have two ports, an inlet, and an outlet. They control the flow between the inlet and outlet by either opening or closing the valve. Three-Way Valves: These valves have three ports, typically an inlet, an outlet, and a common port. They can divert flow between two outlets or mix two incoming flows. Four-Way Valves: These valves have four ports and are used in applications where flow direction needs to be changed or redirected. Normally Open (NO) and Normally Closed (NC): Solenoid valves can be either normally open, where the valve is open in the de-energized state and closes when energized, or normally closed, where the valve is closed in the de-energized state and opens when energized. Applications: Solenoid valves are widely used in various industries and applications, including: HVAC (Heating, Ventilation, and Air Conditioning) systems: Solenoid valves control the flow of refrigerant, hot water, or chilled water in HVAC systems. Industrial Automation: Solenoid valves are used in automated processes to control the flow of liquids or gases, such as in water treatment, oil and gas, chemical processing, and manufacturing industries. Irrigation Systems: Solenoid valves regulate the flow of water in irrigation systems, allowing for automated control of watering schedules. Medical and Laboratory Equipment: Solenoid valves are used in medical devices and laboratory equipment to control the flow of fluids or gases. Advantages: Solenoid valves offer several advantages, including: Fast and precise operation: Solenoid valves can open and close quickly, allowing for rapid control of fluid or gas flow. Remote operation: They can be controlled remotely using electrical signals, making them suitable for automation and integration into control systems. Reliability: Solenoid valves are known for their durability and long service life when properly maintained. Energy efficiency: They consume power only when opening or closing, reducing energy consumption. Wide range of sizes and configurations: Solenoid valves are available in various sizes and configurations to suit different application requirements. Maintenance: Regular maintenance of solenoid valves involves cleaning the valve seat, inspecting and cleaning the plunger or disc, and checking for any signs of damage or leaks. It's important to follow the manufacturer's recommendations for maintenance and ensure that the valve is properly installed and calibrated. When selecting a solenoid valve, consider factors such as the required flow rate, pressure rating, fluid compatibility, electrical specifications, and environmental conditions. Consulting with a valve supplier or industry expert can help in choosing the right solenoid valve for your specific application.

Damor 6.3 Bar Working Pressure and 10000 RPM Air Sander, Spear FC-313A

Ships within 3 days

Damor 6.3 Bar Working Pressure and 10000 RPM Air Sander, Spear FC-313A

By Damor

₹2,595

Introducing the Damor 6.3 Bar Working Pressure and 10000 RPM Air Sander, Spear FC-313A, the perfect tool for achieving a flawless finish on any surface. Designed with precision and efficiency in mind, this air sander operates at a powerful 10000 RPM, allowing you to tackle sanding tasks quickly and effortlessly. The 6.3 bar working pressure ensures optimal performance, making it an essential addition to both professional workshops and DIY enthusiasts' toolkits. Whether you're working on wood, metal, or plastic, the Damor FC-313A delivers smooth results with minimal effort.
Crafted for comfort and durability, the Damor 6.3 Bar Working Pressure and 10000 RPM Air Sander, Spear FC-313A features an ergonomic design that enhances user control and reduces fatigue during extended use. Its lightweight construction makes it easy to maneuver, while the efficient dust collection system keeps your workspace clean and free from debris. Ideal for sanding, polishing, and finishing tasks, this air sander is built to meet the demands of any project. Elevate your sanding experience with the Damor FC-313A and discover the perfect balance of power, precision, and performance.

Ships within 3 days

Damor 1/4 Inch Port Size Foot Pedal Valve

By Damor

₹719 - ₹813

The Damor Foot Pedal Valve is a hands-free and hygienic solution for controlling water flow in various applications. Designed for foot operation, this valve allows users to control water flow without using their hands, making it ideal for environments where hygiene is paramount, such as hospitals, clinics, laboratories, and food processing facilities. Featuring a sturdy and durable construction, the Damor Foot Pedal Valve is built to withstand frequent use and harsh environments. Its ergonomic design ensures ease of operation and reliability, while its foot-activated mechanism provides precise control over water flow. The foot pedal valve is typically connected to a water supply system and can be used to activate and deactivate water flow as needed. Its hands-free operation helps prevent cross-contamination and ensures a hygienic environment. Overall, the Damor Foot Pedal Valve offers a convenient, hygienic, and reliable solution for controlling water flow in a wide range of applications, enhancing efficiency and promoting cleanliness.

Port size : 6.35 mm

Working Pressure : 0-10 Bar

Temperature Range : -5 to 80 deg C

Damor 25.4 mm (1 Inch) Square Drive 4500 RPM Air Impact Wrench Spear FC-550A

Ships within 3 days

Damor 25.4 mm (1 Inch) Square Drive 4500 RPM Air Impact Wrench Spear FC-550A

By Damor

₹17,699

Introducing the Damor 1 Inch Square Drive 4500 RPM Air Impact Wrench Spear FC-550A, the ultimate tool designed for heavy-duty applications. Engineered for unparalleled performance, this air impact wrench is perfect for automotive professionals and industrial mechanics alike. With a powerful 4500 RPM motor, it delivers exceptional torque and efficiency, allowing you to tackle the toughest jobs with ease. The robust 1-inch square drive ensures compatibility with a wide range of sockets, making it versatile for various tasks, from tire changes to assembly work.
Built with durability in mind, the Damor 1 Inch Square Drive 4500 RPM Air Impact Wrench Spear FC-550A features a compact and lightweight design, reducing user fatigue during extended use. Its ergonomic handle provides a comfortable grip, ensuring precision and control in every application. Additionally, this air impact wrench is equipped with a powerful air motor that minimizes downtime and maximizes productivity. Whether you’re in a garage or a construction site, the Damor FC-550A is your reliable partner for achieving professional results. Elevate your toolkit today with this exceptional air impact wrench and experience the difference in performance and reliability.

Damor AF2000 6.35 mm (1/4") Airtech Type Filter

Ships within 4 days

Damor AF2000 6.35 mm (1/4") Airtech Type Filter

By Damor

₹317

A Damor 1/4 Inch Mini Regulator Without Gauge AF-2000 Airtac Type also known as a miniature pressure regulator, is a compact device that regulates and controls the pressure of gases or liquids in various applications. It is typically smaller than standard regulators and is designed for low-flow or low-pressure systems. Here's some information about mini regulators: Purpose: The primary function of a mini regulator is to maintain a consistent and controlled pressure level in a system. It ensures that the pressure of the gas or liquid being delivered remains within a specified range, regardless of fluctuations in the input pressure. Design: Mini regulators are compact and lightweight, making them suitable for applications where space is limited or portability is required. They typically consist of a body or housing, an adjustment knob or screw, and an internal diaphragm or piston mechanism. The adjustment knob allows users to set the desired pressure level, and the internal agency regulates the flow to maintain the set pressure. Pressure Range and Flow Capacity: Mini regulators are designed for low-pressure applications ranging from a few psi (pounds per square inch) to around 100 psi. The flow capacity of mini regulators is usually lower than standard regulators, making them suitable for low-flow systems or applications requiring precise control. Applications: Mini regulators find applications in various industries and systems, including: Analytical and Laboratory Equipment: They are commonly used in gas chromatography, mass spectrometry, and other analytical instruments that require precise control of gas pressures. Medical Devices: Mini regulators are utilised in medical devices such as gas analysers, anaesthesia machines, and respiratory equipment to ensure accurate pressure control. Gas Detection Systems: They are employed in gas detection and monitoring systems to regulate the flow and pressure of calibration gases. Pneumatic Systems: Mini regulators can be used in small-scale pneumatic systems, such as robotics, automation, and control systems. Advantages: Some advantages of mini regulators include: Compact and lightweight design for space-constrained applications or portable systems. Precise pressure control for applications requiring accuracy and stability. Easy adjustment of pressure settings using the adjustment knob or screw. Durable construction and reliable performance. Cost-effective solution for low-flow or low-pressure applications. Maintenance: Maintenance requirements for mini regulators are generally minimal. However, regular inspection and cleaning are recommended to ensure optimal performance and to prevent any clogging or debris buildup that may affect the regulator's operation. When selecting a mini regulator, consider factors such as the desired pressure range, flow capacity, compatibility with the gas or liquid being regulated, and the specific requirements of your application. It's essential to look at the manufacturer's specifications and guidelines to ensure the selected mini regulator suits your needs.

Ships within 3 days

Damor 1000 L Plastic Foam Gun FG-1

By Damor

₹1,002

The Damor 1000 L Plastic Foam Gun FG-1 is a highly efficient foam gun designed for a wide range of cleaning and foam application tasks. With its impressive 1000-liter capacity, this foam gun allows for extended use without the need for frequent refills, making it suitable for both small-scale and large-scale cleaning projects. Featuring a durable plastic construction, the FG-1 foam gun is built to withstand regular use and maintain its performance over time. Its robust design ensures that it can withstand the rigors of heavy-duty cleaning applications, making it an ideal choice for industrial settings, car wash facilities, and professional cleaning services. This foam gun is equipped with a specialized nozzle that creates a thick and rich foam when combined with the appropriate cleaning solution. The foam provides excellent coverage and adhesion to surfaces, ensuring thorough cleaning and maximum effectiveness. It is particularly useful for tasks such as car washing, as the foam clings to the vehicle's surface, allowing the cleaning solution to penetrate and dissolve dirt, grime, and other contaminants effectively. The FG-1 foam gun is designed with user convenience in mind. It features an ergonomic handle that offers a comfortable grip, allowing for precise control and ease of use during extended cleaning sessions. The gun is also equipped with adjustable foam volume and spray pattern settings, providing versatility to suit different cleaning needs. Whether you're a professional cleaner or an enthusiastic homeowner looking to achieve professional-level results, the Damor 1000 L Plastic Foam Gun FG-1 is a reliable and efficient tool for foam application and cleaning tasks. Its large capacity, durable construction, and customizable settings make it a valuable addition to any cleaning arsenal.

Damor 6.3 Bar Working Pressure and 8000 RPM Air Screwdriver, Spear FC-308

Ships within 3 days

Damor 6.3 Bar Working Pressure Air Screwdriver

By Damor

₹2,241 - ₹3,775

The Damor 6.3 Bar Working Pressure Air Screwdriver is a robust and efficient tool engineered for precise fastening in various industrial and automotive applications. Designed to operate at a working pressure of 6.3 bar, this air screwdriver delivers reliable performance and consistent torque, making it ideal for tasks requiring accuracy and speed. Its high-quality construction ensures durability and longevity, even under rigorous use. Equipped with an ergonomic handle, the Damor Air Screwdriver provides exceptional comfort and control, reducing user fatigue during prolonged operation. The balanced design and lightweight build facilitate easy maneuverability, enhancing productivity and efficiency on the job. Its variable speed settings allow for versatile use, accommodating different fastening requirements with ease. The tool's quick-change chuck system ensures rapid bit replacement, minimizing downtime and maximizing operational efficiency. Additionally, the integrated exhaust system directs air away from the user, creating a more comfortable working environment. With its combination of power, precision, and user-friendly features, the Damor 6.3 Bar Working Pressure Air Screwdriver is a valuable addition to any professional's toolkit, ensuring reliable performance in demanding tasks and environments.

Type of Product : Air Screwdriver

Air Inlet : 6.35 mm

Air Hose : 3/8 inch

Working Pressure : 6.3 Bar

Damor 100 Pcs Capacity and 6 mm Fitting Tube Air Brad Nailer, Spear F30

Ships within 3 days

Damor 100 Pcs Capacity and 6 mm Fitting Tube Air Brad Nailer, Spear F30

By Damor

₹2,477

Achieve precision and efficiency in your woodworking projects with the Damor 100 Pcs Capacity and 6 mm Fitting Tube Air Brad Nailer, Spear F30. This top-of-the-line brad nailer is designed to handle up to 100 brads, making it perfect for tackling a variety of tasks from trim work to cabinetry. The Damor Air Brad Nailer features a 6 mm fitting tube for easy and secure connection to your air compressor, ensuring reliable performance and smooth operation every time.
The Damor 100 Pcs Capacity and 6 mm Fitting Tube Air Brad Nailer, Spear F30 stands out with its ergonomic design, which reduces hand fatigue and improves control during extended use. Its robust construction ensures durability and longevity, while the tool-free depth adjustment feature allows for precise nail placement. Ideal for both professional craftsmen and DIY enthusiasts, this brad nailer enhances productivity with its efficient loading system and high-capacity magazine. Choose the Damor Air Brad Nailer for a reliable, high-performance tool that delivers superior results and exceptional ease of use for all your nailing needs.

Page 1 of 1 results

Product Name	Expected Price	Dispatch Time	Discount
Fulcrum 3HP 50L Air Compressor, Speed - 2850 RPM	₹10,973	24 hrs	24.84% OFF
Powerhouse 750W 50L Oil-Free Air Compressor, Speed - 1400 RPM	₹14,159	24 hrs	29.9% OFF
Fulcrum 2.5 HP 30 L Air Compressor TB2030BM	₹9,439	24 hrs	31.84% OFF
Fulcrum Plus 1.5 HP 25 L Oil Free Air Compressor	₹10,737	24 hrs	46.98% OFF
Fulcrum Plus 2 HP 30 L Air Compressor FP1530	₹8,849	24 hrs	37.46% OFF
Ingco 550W HVLP Floor Based Spray Gun, SPG5008	₹2,595	24 hrs	25.45% OFF

Damor Hydraulics and Pneumatics

Top Selling Damor Hydraulics and Pneumatics Products Price List for March 2026