Have a question? Call us now at +91 9650660070

care@industrybuying.com

Elmeasure Fuses Circuit Breakers Components

Showing 40 out of 70 products

Sort by

Elmeasure iACCL 400 32A Single Phase ACCL without Display 4Din Relay Based

Ships within 3 days

Elmeasure iACCL 400 32A Single Phase ACCL without Display 4Din Relay Based

By ELMEASURE

₹1,415

Features:- True RMS measurement. User configurable (Editable) password Simultaneous sampling of Volts & Amps. Simplifies electrical complexity. Safeguards generator by gradual loading & precision monitoring. Inverse Current tripping Saves the age of the cable. Under and Over Voltage protection when it is running on DG. Programmable DG start time which avoids overloading the DG. Programmable DG ON delay facilitates the user frequent ON and OFF when he is away. Intelligent controller trips exactly on the programmed settings – Better accuracy. Resetting the Trip by key press or through communication. Auto Configuration of Meters for Device ID by Pressing Up key for 5 sec.

Elmeasure 3 Phase Automatic Changeover with Current Limiter Contactor Based 63 A, ALM300P10600

Ships within 3 days

Elmeasure 3 Phase Automatic Changeover with Current Limiter Contactor Based, ALM300P (Current 32 to 125A)

By ELMEASURE

₹6,843 - ₹35,399

Elmeasure ALM300P 3 Phase Automatic Changeover with Current Limiter is a contactor-based power transfer unit designed for managing three-phase electrical supply systems. It enables automatic switching between primary and alternate three-phase power sources based on availability, ensuring controlled load transfer within commercial and industrial installations. The integrated current limiter regulates load conditions during alternate source operation, helping maintain balanced performance and protecting connected equipment from excessive current draw. Its contactor-based architecture provides dependable electrical isolation and consistent switching functionality. The ALM300P features a compact, panel-compatible design suitable for structured electrical distribution boards. It continuously monitors supply status and initiates automatic changeover without manual intervention, supporting uninterrupted operational flow in power-dependent environments. The system is engineered for stable performance under varying load conditions and is compatible with standard three-phase electrical networks. Designed for reliability and controlled energy management, the ALM300P is suitable for applications requiring automated source transfer with built-in current limiting in industrial, commercial, and institutional setups.

Type : Contactor Based

Model No : iACCL M300

Phase : 3 Phase

Type of Product : Automatic Changeover with Current Limiter

Protection : Under/Over Voltage

Operational Voltage : 180-270 V AC

Elmeasure iACCL M330 32A 3Phase (Eb) and Single Phase (Dg) ACCL Contactor Based

Ships within 4 days

Elmeasure 3 Phase (EB) & Single Phase (DG) Automatic Changeover with Current Limiter Contactor Based, ALM330P

By ELMEASURE

₹6,607 - ₹7,079

Elmeasure ALM330P 3 Phase (EB) & Single Phase (DG) Automatic Changeover with Current Limiter is a contactor-based solution designed for efficient power source management between electricity board supply and diesel generator input. Engineered to support three-phase EB and single-phase DG configurations, this system ensures controlled and seamless switching based on power availability. The built-in current limiter enhances protection by regulating load during DG operation, preventing overload conditions and maintaining system stability. Its contactor-based design offers reliable electrical isolation and consistent switching performance in commercial and industrial environments. The ALM330P features a compact and panel-friendly construction, making it suitable for structured electrical installations. It is designed to monitor supply parameters and automatically transfer the connected load to the available source without manual intervention. The integration of protective components helps safeguard connected equipment from abnormal current conditions during generator usage. Built for durability and operational consistency, this automatic changeover unit is suitable for applications requiring controlled backup power management and balanced load handling across EB and DG sources.

Type : Contactor Based

Model No : iACCL M330

Phase : 3 Phase (EB) & Single Phase (DG)

Type of Product : Automatic Changeover with Current Limiter

Protection : Under/Over Voltage

Operational Voltage : 180-270 V AC

Elmeasure 3 Phase Automatic Changeover with Current Limiter Contactor Based 63 A, RS485, ALM300P11600

Ships within 3 days

Elmeasure 3 Phase Automatic Changeover with Current Limiter Contactor Based RS485, ALM300P (Current 32 to 125A)

By ELMEASURE

₹8,377 - ₹36,579

Elmeasure ALM300P 3 Phase Automatic Changeover with Current Limiter and RS485 communication is a contactor-based power transfer solution designed for three-phase electrical systems. It automatically switches between primary and alternate three-phase power sources based on supply availability, ensuring controlled and stable load transfer. The integrated current limiter manages load conditions during alternate source operation, helping regulate current flow and protect connected equipment. Its contactor-based design provides reliable electrical isolation and consistent switching performance in demanding electrical environments. The ALM300P with RS485 interface supports communication and integration with monitoring or energy management systems for data access and operational visibility. Its compact, panel-mount construction allows seamless installation within electrical distribution panels. The unit continuously monitors supply parameters and executes automatic changeover without manual intervention. Engineered for durability and consistent performance, this automatic changeover is suitable for commercial and industrial applications requiring three-phase power management, controlled load handling, and communication-enabled system integration.

Type : Contactor Based

Model No : iACCL M300

Standard : IEC 60947-6-1

Phase : 3 Phase

Type of Product : Automatic Changeover with Current Limiter

Protection : Under/Over Voltage

Operational Voltage : 180-270 V AC

Communication Ports : RS485

Tripping Curves : Inverse Curve

Related Searches

elmeasure automatic circuit breaker

elmeasure change over switch

elmeasure molded case circuit breakers (mccb)

elmeasure fuse switch disconnectors

elmeasure motor protection circuit breaker (mpcb)

Elmeasure Single Phase Automatic Changeover with Current Limiter 32 A, Without Display Contactor Based 4 DIN, AL400CD10300

Ships within 3 days

Elmeasure Single Phase Automatic Changeover with Current Limiter 32 A, Without Display Contactor Based 4 DIN, AL400CD10300

By ELMEASURE

₹3,303

Elmeasure Single Phase Automatic Changeover with Current Limiter 32 A, Without Display Contactor Based 4 DIN, AL400CD10300 offers a reliable power transfer solution without the need for a display interface. With a contactor-based mechanism, this model ensures robust and efficient switching between main and backup power supplies. The 4 DIN module design fits easily into standard panels, and the 32 A current limiter helps prevent overload conditions, protecting connected devices.Built for simplicity and durability, the Elmeasure Single Phase Automatic Changeover with Current Limiter 32 A, Without Display Contactor Based 4 DIN, AL400CD10300 is ideal for installations where space is limited and visual monitoring is unnecessary. It ensures automatic switching while managing current limits effectively, making it suitable for essential applications in homes or offices where automated power reliability is a must.

Elmeasure 4 Pole Thermal Magnetic MCCB with 100 A Current and 18 kA Breaking Capacity, E4U100B0100

Ships within 4 days

Elmeasure 4 Pole Thermal Magnetic MCCB 18 kA Breaking Capacity, E4U-B (Current 63 to 125 A)

By ELMEASURE

₹5,781 - ₹6,961

The Elmeasure 4 Pole Thermal Magnetic MCCB 18 kA Breaking Capacity, E4U-B is a molded case circuit breaker designed to deliver dependable protection for three phase and neutral electrical distribution systems. With a rated breaking capacity of 18 kA, this MCCB is engineered to interrupt fault currents efficiently, ensuring protection against overload and short circuit conditions. The thermal magnetic trip mechanism combines inverse-time thermal protection for sustained overloads with instantaneous magnetic tripping for short circuit faults, providing accurate and timely circuit interruption. Its four pole configuration enables simultaneous disconnection of all three phases along with the neutral, supporting complete circuit isolation and improved operational safety. The E4U-B model features a robust molded case construction suitable for installation in distribution boards, switchgear panels, and industrial control assemblies. It is designed to maintain stable electrical performance and consistent tripping characteristics under varying load conditions. The breaker supports reliable arc interruption and steady operation in commercial and industrial environments where controlled power distribution is essential. With integrated thermal magnetic protection and an 18 kA breaking capacity, the Elmeasure E4U-B MCCB ensures structured circuit management and effective fault protection across a wide range of electrical applications.

Type of Product : Thermal Magnetic MCCB

Breaking Capacity : 18 kA

No. of Pole : 4 Pole

Application : Distribution And Lighting Application

Standard : IS/IEC 60947-2, IEC 60947-2 & EN 60947-2

Overload : Setting: 0.8 - 1.0 x In

Life Expectancy : High Electrical & Mechanical Life

Elmeasure Automatic Transfer Switch, RS485, 160 A, 4 Poles Motorized with Inbuilt LCD Controller Universal, AT03FUL10160

Ships within 10 days

Elmeasure 4 Poles Automatic Transfer Switch Motorized RS485 with Inbuilt LCD Controller Universal, AT-FUL (Current 40 to 3200A)

By ELMEASURE

₹29,499 - ₹6,80,559

Elmeasure AT-FUL 4 Poles Automatic Transfer Switch Motorized RS485 with Inbuilt LCD Controller Universal is designed for automated power source management in three-phase electrical distribution systems. The motorized switching mechanism enables smooth and controlled transfer between primary and alternate supplies based on availability. Its 4-pole configuration ensures simultaneous switching of all three phases along with neutral, providing complete electrical isolation and enhanced system protection during source transition. The universal design supports compatibility across varied panel layouts and installation requirements in commercial and industrial environments. This model features an inbuilt LCD controller that displays source status, electrical parameters, and operational conditions for real-time monitoring. The integrated RS485 communication interface enables connectivity with centralized monitoring and supervisory systems for remote data access and system integration. The internal control logic manages automatic changeover without manual intervention, maintaining continuity of connected loads during power interruptions. Engineered for structured panel integration and dependable performance, the AT-FUL is suitable for applications requiring motorized 4-pole switching with display-based supervision and communication-enabled control.

No. of Pole : 4 Poles

Application : Industrial

Type of Product : Automatic Transfer Switch

Protection : Under/Over Voltage, Under/ Over Frequency And Phase Sequence - S1 & S2

Controller : Micro Processor Based

In-built : LCD Controller

Changeover : Motorized

Compatibility : Universal

Communication Ports : RS485

Elmeasure Single Phase Automatic Changeover with Current Limiter 32 A, Digital Display Relay Based 4 DIN, ALM400D10300

Ships within 12 days

Elmeasure Single Phase Automatic Changeover with Current Limiter 32 A, Digital Display Relay Based 4 DIN, ALM400D10300

By ELMEASURE

₹2,800

Elmeasure Single Phase Automatic Changeover with Current Limiter 32 A, Digital Display Relay Based 4 DIN, ALM400D10300 combines precision and functionality in a compact 4 DIN design. The digital display offers clear current readings, while the relay-based switching ensures efficient and quick changeover between power sources. With a 32 A limit, it safeguards electrical systems from overcurrent conditions and supports a smooth power transition.Designed for ease of integration and monitoring, the Elmeasure Single Phase Automatic Changeover with Current Limiter 32 A, Digital Display Relay Based 4 DIN, ALM400D10300 is suitable for environments that require reliable automation and visual feedback. It provides optimal performance in residential and light commercial setups, balancing functionality with protection through its accurate current limiting feature.

Elmeasure Single Phase Automatic Changeover with Current Limiter 32 A, Digital Display Without Voltage and Energy Measurement, ALA400D10300

Ships within 10 days

Elmeasure Single Phase Automatic Changeover with Current Limiter 32 A, Digital Display Without Voltage and Energy Measurement, ALA400D10300

By ELMEASURE

₹1,300

Elmeasure Single Phase Automatic Changeover with Current Limiter 32 A, Digital Display Without Voltage and Energy Measurement, ALA400D10300 is designed to offer efficient and seamless switching between power sources with integrated current limiting. The digital display aids in monitoring current levels without displaying voltage or energy values, making it ideal for applications focused solely on current control. With a 32 A capacity, it ensures adequate protection and load management for single-phase systems, enhancing operational safety and continuity.Compact and easy to install, the Elmeasure Single Phase Automatic Changeover with Current Limiter 32 A, Digital Display Without Voltage and Energy Measurement, ALA400D10300 is well-suited for residential or light commercial use. Its relay-based switching provides dependable performance, and the omission of voltage and energy metrics keeps the design streamlined. It’s an effective choice for users requiring basic current monitoring with automatic source changeover functionality.

Elmeasure 3 Phase Automatic Changeover with Current Limiter LCD Version 32 A, ALM300L10300

Ships within 60 days

Elmeasure 3 Phase Automatic Changeover with Current Limiter LCD Version, ALM300L (Current 32 to 63A)

By ELMEASURE

₹7,433 - ₹17,699

Elmeasure ALM300L 3 Phase Automatic Changeover with Current Limiter LCD Version is designed for automated management of three-phase power sources in commercial and industrial electrical systems. This unit enables controlled switching between primary and alternate supply lines based on availability, ensuring smooth load transfer without manual intervention. The integrated current limiter regulates load during alternate source operation, helping maintain stable electrical performance and protecting connected equipment from excessive current conditions. Its robust internal architecture supports reliable isolation and consistent switching functionality. The ALM300L features an LCD display that provides clear visibility of system parameters and operational status, allowing easy monitoring of supply conditions and load behavior. The compact, panel-compatible design supports structured installation within electrical distribution boards. Continuous monitoring of input supply ensures timely changeover when required, supporting uninterrupted operational flow. Built for durability and dependable performance, the ALM300L is suitable for applications requiring automatic three-phase source transfer with integrated current limiting and real-time display-based monitoring.

Type : LCD Version

Model No : iACCL M300L

Standard : IEC 60947-6-1

Phase : 3 Phase

Type of Product : Automatic Changeover with Current Limiter

Protection : Under/Over Voltage

Operational Voltage : 180-270 V AC

Display Type : LCD Display

Tripping Curves : Inverse Curve

Elmeasure Automatic Transfer Switch Motorized, 63 A, 4 Poles with Inbuilt LCD Controller, Universal, AT01FUL00063

Ships within 60 days

Elmeasure 4 Poles Automatic Transfer Switch Motorized with Inbuilt LCD Controller, Universal, AT-FUL (Current 40 to 3200A)

By ELMEASURE

₹27,139 - ₹6,78,680

You save ₹1,361!

4.78% OFF

Elmeasure AT-FUL 4 Poles Automatic Transfer Switch Motorized with Inbuilt LCD Controller is designed for automated power source management in commercial and industrial electrical systems. The motorized transfer mechanism enables smooth and controlled switching between primary and alternate power supplies based on source availability. Its 4-pole configuration ensures simultaneous switching of all three phases along with neutral, providing complete electrical isolation and enhanced system protection. The universal design supports compatibility with a wide range of power distribution setups, making it suitable for structured installations requiring dependable automatic transfer functionality. The inbuilt LCD controller provides clear display of system parameters, source status, and operational conditions for real-time monitoring. Integrated control logic manages automatic source transfer without manual intervention, supporting continuity of connected loads during supply interruptions. The unit is engineered for panel integration, with a compact and robust construction suited for demanding electrical environments. The Elmeasure AT-FUL Automatic Transfer Switch is suitable for applications requiring motorized 4-pole switching, display-based monitoring, and automated control within comprehensive power management systems.

No. of Pole : 4 Poles

Application : Industrial

Type of Product : Automatic Transfer Switch

Country of Origin : India

Protection : Under/Over Voltage, Under/ Over Frequency And Phase Sequence - S1 & S2

Name of Manufacturer/Packer/Importer : STARTEK INTERNATIONAL

Controller : Micro Processor Based

In-built : LCD Controller

Changeover : Motorized

Compatibility : Universal

Elmeasure Remotely Operated Automatic Transfer Switch with Motorized Changeover, 63 A and 4 Poles, ATR063O008X0017

Ships within 60 days

Elmeasure Remotely Operated Automatic Transfer Switch with Motorized Changeover and 4 Poles, ATeS R (Current 40 to 1600A)

By ELMEASURE

₹22,419 - ₹2,83,199

You save ₹581!

2.53% OFF

Elmeasure ATeS R Remotely Operated Automatic Transfer Switch with Motorized Changeover and 4 Poles is designed for dependable power source management in commercial and industrial electrical systems. This unit enables automatic and remote-controlled transfer between primary and alternate power supplies, ensuring structured load continuity during supply interruptions. The motorized changeover mechanism delivers smooth and controlled switching performance, while the 4-pole configuration provides complete isolation of all conductors, including neutral, enhancing operational safety and system integrity. The ATeS R is engineered with a robust enclosure and internal mechanism suitable for integration within electrical distribution panels. Its remote operation capability allows centralized control and monitoring of transfer functions, supporting coordinated power management across installations. The motorized assembly ensures precise switching action, reducing manual intervention and supporting consistent performance under varying load conditions. Designed for applications requiring automated transfer functionality with full 4-pole isolation, the ATeS R is suitable for facilities where reliable and remotely managed power switching is essential.

No. of Pole : 4 Poles

Application : Industrial

Type of Product : Automatic Transfer Switch

Country of Origin : India

Operating Type : Remotely Operated

Name of Manufacturer/Packer/Importer : STARTEK INTERNATIONAL

Changeover : Motorized

Elmeasure Automatic Transfer Switch Motorized, 200A, 4 Poles with Inbuilt LED Controller, Universal, AT04FUE00200

Ships within 60 days

Elmeasure 4 Poles Automatic Transfer Switch Motorized with Inbuilt LED Controller, Universal, AT-FUE (Current 40 to 3200A)

By ELMEASURE

₹24,779 - ₹6,76,332

You save ₹2,571!

4.52% OFF

Elmeasure AT-FUE 4 Poles Automatic Transfer Switch Motorized with Inbuilt LED Controller Universal is designed for automated power source management in three-phase electrical distribution systems. The motorized switching mechanism enables smooth and controlled transfer between primary and alternate power supplies based on availability. Its 4-pole configuration ensures simultaneous switching of all three phases along with neutral, providing complete electrical isolation and enhanced system protection during source transition. The universal design supports compatibility across varied panel layouts and installation requirements in commercial and industrial environments. This model is equipped with an inbuilt LED controller that offers clear visual indication of source status and operational conditions for quick panel-level monitoring. The integrated control logic manages automatic changeover without manual intervention, supporting continuity of connected loads during supply interruptions. Built with a robust internal assembly suitable for panel integration, the AT-FUE is appropriate for applications requiring motorized 4-pole automatic transfer with LED-based status indication and dependable performance within structured power management systems.

No. of Pole : 4 Poles

Application : Industrial

Type of Product : Automatic Transfer Switch

Protection : Under/Over Voltage, Under/ Over Frequency And Phase Sequence - S1 & S2

Controller : Micro Processor Based

In-built : LED Controller

Changeover : Motorized

Compatibility : Universal

Elmeasure 3 Phase Automatic Changeover with Current Limiter LCD Version 32 A, RS485, ALM300L11300

Ships within 60 days

Elmeasure 3 Phase Automatic Changeover with Current Limiter LCD Version, RS485, ALM300L (Current 32 to 63A)

By ELMEASURE

₹8,967 - ₹18,879

Elmeasure ALM300L 3 Phase Automatic Changeover with Current Limiter LCD Version with RS485 communication is engineered for automated management of three-phase power sources in commercial and industrial electrical systems. The unit enables controlled and seamless switching between primary and alternate supplies based on availability, ensuring stable load transfer without manual operation. Its integrated current limiter regulates load during alternate source usage, supporting balanced power distribution and protecting connected equipment from abnormal current conditions. The internal architecture is designed to deliver dependable isolation and consistent switching performance under varying load environments. This model features an LCD display that provides clear visualization of system parameters, operational status, and load conditions for real-time monitoring. The inclusion of RS485 communication allows integration with centralized monitoring and energy management systems for remote data access and supervision. The compact, panel-mount design ensures organized installation within electrical distribution boards. Continuous supply monitoring enables timely automatic changeover, making the ALM300L suitable for applications requiring reliable three-phase source transfer with current limiting, display-based monitoring, and communication-enabled system integration.

Type : LCD Version

Model No : iACCL M300L

Standard : IEC 60947-6-1

Phase : 3 Phase

Type of Product : Automatic Changeover with Current Limiter

Protection : Under/Over Voltage

Operational Voltage : 180-270 V AC

Communication Ports : RS485

Display Type : LCD Display

Tripping Curves : Inverse Curve

Elmeasure 4 Poles Manual Transfer Switch with 400A Current, MTS 400A

Ships within 60 days

Elmeasure 4 Poles Manual Transfer Switch, MTS (Current 63 to 3200A)

By ELMEASURE

₹5,781 - ₹4,22,707

You save ₹1,641!

4.9% OFF

Elmeasure 4 Poles Manual Transfer Switch (MTS) is designed for controlled manual switching between two power sources in commercial and industrial electrical systems. The 4-pole configuration ensures complete isolation of all live conductors along with the neutral line, supporting enhanced safety and system protection during source transfer. This manual transfer switch enables operators to physically shift load connection from the primary supply to an alternate source, making it suitable for installations where manual supervision of power changeover is required. Its sturdy construction supports dependable mechanical operation and consistent electrical contact performance. The MTS is engineered for panel-mounted integration within electrical distribution boards, offering structured installation and organized wiring management. The switch mechanism is designed for smooth handle operation, providing clear source position indication during transfer. Built to handle rated load conditions across all four poles, it supports balanced power distribution and secure switching in three-phase systems. The Elmeasure 4 Poles Manual Transfer Switch is suitable for applications requiring reliable manual source selection with full conductor isolation and stable operational performance.

No. of Pole : 4 Poles

Application : Industrial

Type of Product : Manual Transfer Switch

Country of Origin : India

Name of Manufacturer/Packer/Importer : STARTEK INTERNATIONAL

No. of Positions : 3

Life Expectancy : High Electrical and Mechanical Life

Design : Modular and Compact Design

Elmeasure Automatic Transfer Switch, RS485, 63 A, 4 Poles Motorized with Inbuilt LED Controller Universal, AT01FUE10063

Ships within 60 days

Elmeasure 4 Poles Automatic Transfer Switch Motorized RS485 with Inbuilt LED Controller Universal, AT-FUE (Current 40 to 3200A)

By ELMEASURE

₹27,139 - ₹6,78,210

You save ₹861!

3.07% OFF

Elmeasure AT-FUE 4 Poles Automatic Transfer Switch Motorized RS485 with Inbuilt LED Controller Universal is engineered for automated power source transfer in three-phase electrical distribution systems. The motorized switching mechanism enables smooth and controlled changeover between primary and alternate supplies based on availability. Its 4-pole configuration ensures simultaneous switching of all three phases along with neutral, providing complete electrical isolation and enhanced protection during source transition. The universal design supports flexible integration across varied panel configurations in commercial and industrial installations. This model features an inbuilt LED controller that provides clear visual indication of source availability and operational status for quick monitoring at the panel level. The integrated RS485 communication interface allows connectivity with centralized monitoring and supervisory systems for remote data access and system integration. Automatic control logic manages load transfer without manual intervention, supporting continuity of connected equipment during power interruptions. Built for dependable panel integration and consistent performance, the AT-FUE is suitable for applications requiring motorized 4-pole switching with LED-based indication and communication-enabled monitoring capability.

No. of Pole : 4 Poles

Application : Industrial

Type of Product : Automatic Transfer Switch

Protection : Under/Over Voltage, Under/ Over Frequency And Phase Sequence - S1 & S2

Controller : Micro Processor Based

In-built : LED Controller

Changeover : Motorized

Compatibility : Universal

Communication Ports : RS485

Elmeasure 3 Phase (EB) & Single Phase (DG) Automatic Changeover with Current Limiter 40 A, Contactor Based, ALM330P11400

Ships within 60 days

Elmeasure 3 Phase (EB) & Single Phase (DG) Automatic Changeover with Current Limiter RS485 Contactor Based, ALM330P

By ELMEASURE

₹8,023 - ₹8,613

Elmeasure ALM330P 3 Phase (EB) & Single Phase (DG) Automatic Changeover with Current Limiter and RS485 communication is a contactor-based power management unit designed for controlled switching between electricity board supply and diesel generator input. It supports three-phase EB and single-phase DG configurations, enabling structured load transfer based on source availability. The integrated current limiter regulates load during DG operation, helping maintain stable performance and preventing excessive current draw. Its contactor-based mechanism ensures reliable electrical separation and consistent switching response in commercial and industrial power systems. This model is equipped with RS485 communication capability, allowing integration with monitoring systems for data access and remote supervision. The compact panel-mount design supports organized installation within electrical distribution boards. The ALM330P continuously monitors input parameters and automatically transfers the load to the active source without manual intervention. Designed for durability and operational stability, it is suitable for applications requiring automated source changeover, controlled generator load management, and communication-enabled power monitoring within structured electrical infrastructure.

Type : Contactor Based

Model No : iACCL M330

Standard : IEC 60947-6-1

Size : 144x144 mm

Phase : 3 Phase (EB) & Single Phase (DG)

Type of Product : Automatic Changeover with Current Limiter

Protection : Under/Over Voltage

Operational Voltage : 180-270 V AC

Communication Ports : RS485

Tripping Curves : Inverse Curve

Elmeasure Microprocessor Based LSIG MCCB Ewave Series 4 Pole 320-800 A Current Rating and 50 kA Breaking Capacity, E4N1250NM

Ships within 60 days

Elmeasure Microprocessor Based LSIG MCCB Ewave Series 4 Pole 50 kA Breaking Capacity, E4-NM (Current 320 to 1250 A)

By ELMEASURE

₹95,579 - ₹1,53,399

The Elmeasure Microprocessor Based LSIG MCCB Ewave Series 4 Pole 50 kA Breaking Capacity, E4-NM is a high-capacity molded case circuit breaker designed for advanced protection of three phase and neutral electrical distribution systems. With a rated breaking capacity of 50 kA, this MCCB is engineered to interrupt substantial fault currents, ensuring reliable protection against overload, short circuit, and ground fault conditions. The integrated microprocessor-based LSIG trip unit provides configurable long time (L), short time (S), instantaneous (I), and ground fault (G) protection functions, enabling accurate fault detection and selective coordination within complex power distribution networks. Its four pole configuration allows simultaneous disconnection of all three phases along with the neutral for complete circuit isolation. Part of the Ewave Series, the E4-NM features a compact and robust molded case construction suitable for installation in switchboards, panel boards, and industrial control systems. The digital protection mechanism enhances tripping precision and maintains consistent electrical performance under varying load conditions. Designed for commercial and industrial applications, this MCCB supports dependable arc interruption and stable operation. With microprocessor-based LSIG protection and a 50 kA breaking capacity, the E4-NM ensures structured power distribution management and comprehensive fault protection across high-capacity electrical installations.

Type : Microprocessor Based LSIG

Type of Product : MCCB

Series : Ewave

Breaking Capacity : 50 kA

No. of Pole : 4 Pole

Model No : E4N1250NM

Protection : Inbuilt Instantaneous, Inbuilt ground fault protection from 20% to 50% of In, Adjustable neutral overload protection from 50% to 150% of Ir

Application : Industrial

Standard : IS/IEC 60947-2

Suitable For : Distribution Application

Setting : Adjustable Short-Circuit: 1.5 to 8 x Ir, Adjustable Overload: 0.4 to 1.0 x In

Elmeasure Automatic Transfer Switch Motorized 1000 A, 4 Poles, Incoming from Top with Inbuilt LCD Controller, AT06FTL01000

Ships within 60 days

Elmeasure 4 Poles Automatic Transfer Switch Motorized Incoming from Top with Inbuilt LCD Controller, AT06FTL (Current 800 to 1600A)

By ELMEASURE

₹2,35,999 - ₹2,94,999

You save ₹15,201!

6.05% OFF

Elmeasure AT06FTL 4 Poles Automatic Transfer Switch Motorized Incoming from Top with Inbuilt LCD Controller is engineered for automated source changeover in three-phase power distribution systems. The motorized switching mechanism enables smooth and controlled transfer between primary and alternate power supplies based on availability. Designed with a top incoming configuration, it supports structured cable routing and organized panel integration. The 4-pole design ensures simultaneous switching of all three phases along with neutral, providing complete isolation and enhanced electrical safety during source transition. This model features an inbuilt LCD controller that displays system parameters, source status, and operational information for clear monitoring at the panel level. The integrated control logic manages automatic transfer without manual intervention, supporting continuity of connected loads during power interruptions. Built with a robust internal mechanism and panel-compatible construction, the AT06FTL is suitable for commercial and industrial installations requiring motorized automatic transfer with top-entry wiring and display-based system monitoring.

No. of Pole : 4 Poles

Application : Industrial

Type of Product : Automatic Transfer Switch

Protection : Under/Over Voltage, Under/ Over Frequency And Phase Sequence - S1 & S2

Connection Type : Incoming from Top

Controller : Micro Processor Based

In-built : LCD Controller

Changeover : Motorized

Elmeasure Automatic Transfer Switch Motorized 1250A, 4 Poles, Incoming from Top with Inbuilt LED Controller, AT06FTE01250

Ships within 60 days

Elmeasure 4 Poles Automatic Transfer Switch Motorized Incoming from Top with Inbuilt LED Controller, AT06FTE (Current 800 to 1600A)

By ELMEASURE

₹2,24,199 - ₹2,94,999

You save ₹9,701!

3.77% OFF

Elmeasure AT06FTE 4 Poles Automatic Transfer Switch Motorized Incoming from Top with Inbuilt LED Controller is designed for automated source transfer in three-phase electrical distribution systems. The motorized switching mechanism enables smooth and controlled changeover between primary and alternate power supplies based on availability. With a top incoming configuration, it supports organized cable routing from the upper side of the panel, ensuring structured installation and efficient space utilization. The 4-pole design allows simultaneous switching of all three phases along with neutral, providing complete electrical isolation during source transition. This model features an inbuilt LED controller that provides clear visual indication of source status and operational conditions for quick panel-level monitoring. The integrated control logic manages automatic load transfer without manual intervention, supporting continuity of connected equipment during power interruptions. Built with a robust internal assembly and panel-compatible design, the AT06FTE is suitable for commercial and industrial applications requiring motorized automatic transfer with top-entry wiring and LED-based status indication.

No. of Pole : 4 Poles

Application : Industrial

Type of Product : Automatic Transfer Switch

Protection : Under/Over Voltage, Under/ Over Frequency And Phase Sequence - S1 & S2

Connection Type : Incoming from Top

Controller : Micro Processor Based

In-built : LED Controller

Changeover : Motorized

Elmeasure Isolator with Dual Output Accuracy Class 0.5% and 60 to 300V AC/DC Aux Input, IS0200D402X1100

Ships within 60 days

Elmeasure Isolator with Dual Output and 60 to 300V AC/DC Aux Input, IS0200D

By ELMEASURE

₹4,129 - ₹4,837

You save ₹221!

5.08% OFF

The Elmeasure Isolator with Dual Output IS0200D is designed for secure signal isolation and reliable data transmission in industrial and commercial electrical systems. Featuring a dual output configuration, this isolator enables simultaneous signal distribution to multiple monitoring or control devices while maintaining electrical separation between input and output circuits. It supports an auxiliary supply range of 60 to 300 V AC/DC, providing flexible power compatibility for varied installation environments.
The IS0200D Isolator ensures stable signal conditioning and protects connected equipment from electrical noise, surges, and ground loop interference. Its compact panel-mount design allows easy integration into control panels and automation systems, while the robust construction supports dependable performance under demanding operating conditions. Suitable for use with transducers, PLCs, and energy management systems, this dual output isolator enhances system reliability and maintains accurate signal integrity across diverse monitoring applications.

Type of Product : Isolator

Application : Industrial

Country of Origin : India

Name of Manufacturer/Packer/Importer : STARTEK INTERNATIONAL

Output Current : 4-20 mA

Output : Dual Output

Auxiliary Input : 60 to 300V AC/DC

Elmeasure Isolator with Single Output Accuracy Class 0.2% and 60 to 300V AC/DC Aux Input, IS0100D302X1000

Ships within 60 days

Elmeasure Isolator with Single Output and 60 to 300V AC/DC Aux Input, IS0100D

By ELMEASURE

₹2,595 - ₹3,539

You save ₹177!

5.09% OFF

The Elmeasure Isolator with Single Output IS0100D is designed to provide reliable electrical signal isolation in industrial and commercial monitoring systems. Equipped with a single output configuration, this isolator ensures safe separation between input and output circuits, protecting connected equipment from electrical noise, surges, and ground loop interference. It supports an auxiliary supply range of 60 to 300 V AC/DC, offering flexible power compatibility for diverse installation requirements.
The IS0100D Isolator delivers stable signal transmission while maintaining high accuracy and operational safety across control and automation panels. Its compact design enables easy mounting within switchboards, and the robust construction ensures dependable performance under demanding conditions. Suitable for integration with transducers, PLC systems, and energy monitoring devices, this isolator supports consistent signal conditioning and enhances overall system reliability in various electrical applications.

Type of Product : Isolator

Application : Industrial

Country of Origin : India

Name of Manufacturer/Packer/Importer : STARTEK INTERNATIONAL

Output Current : 4-20 mA

Output : Single Output

Auxiliary Input : 60 to 300V AC/DC

Elmeasure Single Phase Automatic Changeover with Current Limiter 32 A, Digital Display Relay Based 4 DIN, ALM400D11300

Ships within 60 days

Elmeasure Single Phase Automatic Changeover with Current Limiter 32 A, Digital Display Relay Based 4 DIN, ALM400D11300

By ELMEASURE

₹4,300

Elmeasure Single Phase Automatic Changeover with Current Limiter 32 A, Digital Display Relay Based 4 DIN, ALM400D11300 offers reliable switching capabilities with integrated current limiting and digital display functionality. It provides visual feedback on operating conditions while managing load transitions efficiently using a relay-based mechanism. The 4 DIN configuration ensures a space-saving installation, ideal for compact control panels.With its ability to handle up to 32 A, the Elmeasure Single Phase Automatic Changeover with Current Limiter 32 A, Digital Display Relay Based 4 DIN, ALM400D11300 helps protect connected systems against overcurrent scenarios. This model is well-suited for applications demanding reliable automation and current monitoring, making it a practical solution for modern energy management systems.

Elmeasure 4 Pole Thermal Magnetic MCCB with 160-200 A Current and 25 kA Breaking Capacity, E4U250C0200

Ships within 60 days

Elmeasure 4 Pole Thermal Magnetic MCCB 25 kA Breaking Capacity, E4U-C (Current 125 to 250 A)

By ELMEASURE

₹9,911 - ₹14,159

The Elmeasure 4 Pole Thermal Magnetic MCCB 25 kA Breaking Capacity, E4U-C is a molded case circuit breaker designed to provide dependable protection for three phase and neutral electrical distribution systems. With a rated breaking capacity of 25 kA, this MCCB is engineered to interrupt high fault currents efficiently, ensuring protection against overload and short circuit conditions. The integrated thermal magnetic trip mechanism delivers inverse-time thermal protection for sustained overloads and instantaneous magnetic tripping for short circuit faults, enabling accurate and responsive circuit interruption. Its four pole configuration allows simultaneous disconnection of all three phases along with the neutral for complete circuit isolation. The E4U-C model features a robust molded case construction suitable for installation in distribution boards, switchgear assemblies, and industrial control panels. It is designed to maintain stable electrical performance and consistent tripping characteristics under varying load conditions. The breaker supports reliable arc interruption and steady operation in commercial and industrial environments where controlled power management is essential. With thermal magnetic protection and a 25 kA breaking capacity, the Elmeasure E4U-C MCCB ensures structured circuit management and effective fault protection across diverse electrical applications.

Type of Product : Thermal Magnetic MCCB

Breaking Capacity : 25 kA

No. of Pole : 4 Pole

Model No : E4U 250C

Application : Distribution And Lighting Application

Standard : IS/IEC 60947-2, IEC 60947-2 & EN 60947-2

Overload : Setting: 0.8 - 1.0 x In

Life Expectancy : High Electrical & Mechanical Life

Elmeasure EDO LSIG Breaker ACB Delta Series 4 Pole 1250 A Current Rating and 50 kA Breaking Capacity, E4DLED 1250

Ships within 60 days

Elmeasure EDO LSIG Breaker ACB Delta Series 4 Pole 50 kA Breaking Capacity, E4DLED (Current 800 to 3200 A)

By ELMEASURE

₹2,24,199 - ₹4,21,900

Elmeasure EDO LSIG Breaker ACB Delta Series 4 Pole 50 kA Breaking Capacity, E4DLED is a high-performance air circuit breaker engineered for comprehensive protection in three-phase electrical distribution systems requiring neutral disconnection. Designed with a 50 kA breaking capacity, this 4-pole breaker delivers reliable short-circuit interruption, overload protection, and earth leakage detection, ensuring robust safeguarding of electrical installations in commercial, industrial, and institutional environments. The 4-pole configuration enables simultaneous switching of all three phases along with neutral, providing complete circuit isolation and enhanced electrical safety under fault conditions. Its EDO LSIG characteristics (Earth Leakage, Long time, Short time, Instantaneous, and Ground fault protection) offer adaptable response settings for precise fault detection and system protection. The E4DLED model from the Delta series is built for integration within electrical distribution panels and switchgear assemblies, featuring a panel-compatible design for organized installation. The breaker’s protection functions are calibrated to detect and interrupt abnormal current conditions, minimizing equipment damage and enhancing overall system stability. Suitable for three-phase power networks requiring high breaking capacity, neutral protection, and tailored EDO LSIG response, the Elmeasure E4DLED ACB is engineered to deliver dependable performance and consistent electrical safeguarding.

Type of Product : ACB

Breaking Capacity : 50 kA

Standard : IS/IEC 60947-2 & IEC 60947-2

Type : EDO LSIG Breaker

No. of Pole : 4 Pole

Series : Delta

Application : Industrial

Elmeasure Microprocessor Based LSI MCCB Ewave Series 4 Pole 320-800 A Current Rating and 50 kA Breaking Capacity, E4N1250NM

Ships within 60 days

Elmeasure Microprocessor Based LSI MCCB Ewave Series 4 Pole 50 kA Breaking Capacity, E4-NM (Current 320 to 1250 A)

By ELMEASURE

₹70,799 - ₹1,16,819

The Elmeasure Microprocessor Based LSI MCCB Ewave Series 4 Pole 50 kA Breaking Capacity, E4-NM is a high-capacity molded case circuit breaker engineered for advanced protection of three phase and neutral electrical distribution systems. With a rated breaking capacity of 50 kA, this MCCB is designed to interrupt substantial fault currents, ensuring reliable safeguarding against overloads and short circuit conditions. The integrated microprocessor-based LSI trip unit offers adjustable long time (L), short time (S), and instantaneous (I) protection functions, enabling precise fault detection and selective coordination across complex power networks. Its four pole configuration allows simultaneous disconnection of all three phases along with the neutral for complete circuit isolation. Part of the Ewave Series, the E4-NM features a compact and robust molded case design suitable for installation in switchboards, distribution panels, and industrial control systems. The digital protection mechanism enhances tripping accuracy and maintains stable performance under varying load demands. Built for commercial and industrial environments, this MCCB supports dependable arc interruption and consistent electrical operation. With microprocessor-based LSI protection and a 50 kA breaking capacity, the E4-NM ensures structured power distribution management and comprehensive fault protection across high-capacity electrical installations.

Type : Microprocessor Based LSI

Type of Product : MCCB

Series : Ewave

Breaking Capacity : 50 kA

No. of Pole : 4 Pole

Model No : E4N1250NM

Protection : Inbuilt Instantaneous, Inbuilt ground fault protection from 20% to 50% of In, Adjustable neutral overload protection from 50% to 150% of Ir

Application : Industrial

Standard : IS/IEC 60947-2

Suitable For : Distribution Application

Setting : Adjustable Short-Circuit: 1.5 to 8 x Ir, Adjustable Overload: 0.4 to 1.0 x In

Elmeasure TPN Switch Disconnector Fuse with 32 A Current Rating, 690 V AC and FR1 Frame, E3SDF 032

Ships within 60 days

Elmeasure TPN Switch Disconnector Fuse 690 V AC, E3SDF

By ELMEASURE

₹2,477 - ₹50,739

The Elmeasure TPN Switch Disconnector Fuse E3SDF is designed for safe and reliable protection of three-phase electrical circuits up to 690 V AC. This switch disconnector fuse combines the functionality of a disconnector with integrated fuses, allowing secure isolation and overload protection in industrial and commercial electrical systems. Its robust construction ensures stable operation under high-current conditions while providing easy installation in control panels and distribution boards.
Engineered for durability and dependable performance, the E3SDF switch disconnector fuse offers precise circuit protection, minimizing the risk of electrical faults and equipment damage. Its compact design and user-friendly operation make it suitable for a wide range of applications requiring both isolation and overload protection. Ideal for power distribution, motor control, and industrial automation, this Elmeasure TPN switch disconnector fuse delivers reliable protection and long-term operational stability in diverse electrical environments.

Application : Industrial

Voltage : 690 V AC

Type of Product : TPN Switch Disconnector Fuse

Standard : IEC 60947-3, IS/IEC 60947-3

Country of Origin : India

Features : Isolable Neutral

Name of Manufacturer/Packer/Importer : STARTEK INTERNATIONAL

Lock Type : Door Interlock & Padlock

Elmeasure Automatic Transfer Switch, RS485, 1000 A, 4 Poles, Incoming from Bottom with Inbuilt LCD Controller, AT06FBL11000

Ships within 60 days

Elmeasure 4 Poles Automatic Transfer Switch Motorized RS485 Incoming from Bottom with Inbuilt LCD Controller, AT06FBL (Current 800 to 1250A)

By ELMEASURE

₹2,35,999 - ₹2,94,999

You save ₹5,401!

2.13% OFF

Elmeasure AT06FBL 4 Poles Automatic Transfer Switch Motorized RS485 Incoming from Bottom with Inbuilt LCD Controller is engineered for automated power source transfer in three-phase electrical systems. The motorized switching mechanism enables smooth and controlled changeover between primary and alternate power supplies based on source availability. Designed with a bottom incoming configuration, it supports organized cable entry from the lower side of the panel for structured wiring management. The 4-pole construction ensures simultaneous switching of all three phases along with neutral, providing complete electrical isolation during source transition. This model is equipped with an inbuilt LCD controller that displays operational parameters, source status, and system conditions for real-time monitoring at the panel level. The integrated RS485 communication interface allows connectivity with supervisory and energy management systems for remote data access and centralized monitoring. Automatic control logic manages load transfer without manual intervention, supporting continuity of connected loads during supply interruptions. Built for reliable performance and panel integration, the AT06FBL is suitable for commercial and industrial installations requiring motorized automatic transfer with bottom-entry wiring and communication-enabled monitoring.

No. of Pole : 4 Poles

Application : Industrial

Type of Product : Automatic Transfer Switch

Protection : Under/Over Voltage, Under/ Over Frequency And Phase Sequence - S1 & S2

Connection Type : Incoming from Bottom

Controller : Micro Processor Based

In-built : LCD Controller

Changeover : Motorized

Communication Ports : RS485

Elmeasure Automatic Transfer Switch Motorized 800 A, 4 Poles, Incoming from Bottom with Inbuilt LCD Controller, AT06FBL00800

Ships within 60 days

Elmeasure 4 Poles Automatic Transfer Switch Motorized Incoming from Bottom with Inbuilt LCD Controller, AT06FBL (Current 800 to 1600A)

By ELMEASURE

₹2,35,999 - ₹2,94,999

You save ₹3,981!

1.66% OFF

Elmeasure AT06FBL 4 Poles Automatic Transfer Switch Motorized Incoming from Bottom with Inbuilt LCD Controller is designed for automated source transfer in three-phase electrical distribution systems. The motorized changeover mechanism enables smooth and controlled switching between primary and alternate power supplies based on availability. Featuring a bottom incoming configuration, it supports structured cable entry from the lower side of the panel, allowing organized wiring and efficient space utilization. The 4-pole construction ensures simultaneous switching of all three phases along with neutral, providing complete electrical isolation during source transition. This model is equipped with an inbuilt LCD controller that displays source status, system parameters, and operational information for real-time panel-level monitoring. The integrated control logic manages automatic transfer without manual intervention, supporting uninterrupted power flow to connected loads during supply interruptions. Built with a robust internal assembly and panel-mount design, the AT06FBL is suitable for commercial and industrial installations requiring motorized automatic transfer with bottom-entry wiring and display-based system supervision.

No. of Pole : 4 Poles

Application : Industrial

Type of Product : Automatic Transfer Switch

Protection : Under/Over Voltage, Under/ Over Frequency And Phase Sequence - S1 & S2

Connection Type : Incoming from Bottom

Controller : Micro Processor Based

In-built : LCD Controller

Changeover : Motorized

Elmeasure Automatic Transfer Switch, RS485, 1000A, 4 Poles, Incoming from Bottom with Inbuilt LED Controller, AT06FBE11000

Ships within 60 days

Elmeasure 4 Poles Automatic Transfer Switch RS485 Incoming from Bottom with Inbuilt LED Controller, AT06FBE (Current 800 to 1600A)

By ELMEASURE

₹2,35,999 - ₹2,94,999

You save ₹14,701!

5.86% OFF

Elmeasure AT06FBE 4 Poles Automatic Transfer Switch RS485 Incoming from Bottom with Inbuilt LED Controller is designed for automated source transfer in three-phase electrical distribution systems. The 4-pole configuration enables simultaneous switching of all three phases along with neutral, ensuring complete circuit isolation during changeover. With a bottom incoming arrangement, the unit supports organized cable routing from the lower side of the panel, allowing structured wiring and efficient installation. The switching mechanism is engineered for stable and consistent performance under rated load conditions in commercial and industrial environments. This model features an inbuilt LED controller that provides clear visual indication of source availability and operational status for quick panel-level monitoring. The integrated RS485 communication interface allows connectivity with supervisory and energy management systems for remote data access and centralized monitoring. Automatic control logic manages source transfer based on supply conditions without manual intervention, supporting continuity of connected loads during power interruptions. The AT06FBE is suitable for applications requiring 4-pole automatic transfer with bottom-entry wiring, LED-based status indication, and communication-enabled system integration.

No. of Pole : 4 Poles

Application : Industrial

Type of Product : Automatic Transfer Switch

Protection : Under/Over Voltage, Under/ Over Frequency And Phase Sequence - S1 & S2

Connection Type : Incoming from Bottom

Controller : Micro Processor Based

In-built : LED Controller

Changeover : Motorized

Communication Ports : RS485

Elmeasure 3 Pole Thermal Magnetic MCCB with 100 A Current and 18 kA Breaking Capacity, E3U100B0100

Ships within 60 days

Elmeasure 3 Pole Thermal Magnetic MCCB 18 kA Breaking Capacity, E3U-B (Current 63 to 125 A)

By ELMEASURE

₹4,483 - ₹5,427

The Elmeasure 3 Pole Thermal Magnetic MCCB 18 kA Breaking Capacity, E3U-B is a molded case circuit breaker designed to provide reliable protection for three phase electrical distribution systems. With a rated breaking capacity of 18 kA, this MCCB is engineered to interrupt moderate to high fault currents effectively, safeguarding circuits against overload and short circuit conditions. The integrated thermal magnetic trip mechanism delivers inverse-time thermal protection for overload situations and instantaneous magnetic tripping for short circuit faults, ensuring accurate and responsive circuit interruption. Its three pole configuration enables simultaneous isolation of all phases for secure and controlled power distribution. The E3U-B model features a durable molded case construction suitable for installation in distribution boards, switchgear assemblies, and industrial control panels. It is designed to maintain stable electrical performance and consistent tripping characteristics under varying load conditions. The breaker supports dependable arc interruption and long operational life in commercial and industrial environments. With thermal magnetic protection and an 18 kA breaking capacity, the Elmeasure E3U-B MCCB ensures structured circuit management and effective fault protection across a wide range of electrical applications.

Type of Product : Thermal Magnetic MCCB

Breaking Capacity : 18 kA

No. of Pole : 3 Pole

Application : Distribution And Lighting Application

Standard : IS/IEC 60947-2, IEC 60947-2 & EN 60947-2

Overload : Setting: 0.8 - 1.0 x In

Life Expectancy : High Electrical & Mechanical Life

Elmeasure 3 Pole Thermal Magnetic MCCB 160 A Current and 10 kA Breaking Capacity With Spreader, E3Y2500160

Ships within 60 days

Elmeasure 3 Pole Thermal Magnetic MCCB 10 kA Breaking Capacity With Spreader, E3Y (Current 100 to 250 A)

By ELMEASURE

₹2,595 - ₹8,849

The Elmeasure 3 Pole Thermal Magnetic MCCB 10 kA Breaking Capacity With Spreader, E3Y is a molded case circuit breaker designed for reliable protection of three phase electrical distribution systems. With a rated breaking capacity of 10 kA, this MCCB is engineered to interrupt fault currents effectively, ensuring protection against overload and short circuit conditions. The integrated thermal magnetic trip mechanism combines inverse-time thermal protection for sustained overloads with instantaneous magnetic tripping for short circuit faults, delivering accurate and responsive circuit interruption. Its three pole configuration enables simultaneous isolation of all phases for secure circuit control. The E3Y model is equipped with a spreader, supporting improved terminal connectivity and streamlined installation within distribution boards and control panels. Built with a durable molded case construction, the breaker is designed to maintain stable electrical performance under varying load conditions. It supports dependable arc interruption and consistent tripping characteristics suitable for commercial and light industrial applications. With thermal magnetic protection and a 10 kA breaking capacity, the Elmeasure E3Y MCCB ensures structured power distribution and effective circuit safeguarding across a wide range of electrical installations.

Type : With Spreader

Type of Product : Thermal Magnetic MCCB

Breaking Capacity : 10 kA

No. of Pole : 3 Pole

Application : Distribution And Lighting Application

Standard : IS/IEC 60947-2, IEC 60947-2 & EN 60947-2

Overload : Setting: 0.8 - 1.0 x In

Life Expectancy : High Electrical & Mechanical Life

Elmeasure EDO LSIG Breaker ACB Delta Series 3 Pole 800 A Current Rating and 50 kA Breaking Capacity, E3DLED 0800

Ships within 60 days

Elmeasure EDO LSIG Breaker ACB Delta Series 3 Pole 50 kA Breaking Capacity, E3DLED (Current 800 to 3200 A)

By ELMEASURE

₹2,00,599 - ₹3,42,199

Elmeasure EDO LSIG Breaker ACB Delta Series 3 Pole 50 kA Breaking Capacity, E3DLED is a high-performance air circuit breaker engineered for effective protection in three-phase electrical distribution systems. Designed with a 50 kA breaking capacity, this 3-pole breaker provides dependable short-circuit interruption and overload protection, ensuring robust safeguarding of electrical installations in commercial, industrial, and institutional applications. The 3-pole configuration supports simultaneous disconnection of all three phases under fault conditions, delivering comprehensive protection while maintaining system stability. Its EDO (Earth Leakage and Overcurrent) LSIG characteristics (Long time, Short time, Instantaneous, and Ground fault detection) offer adaptable protection settings to respond precisely to varying electrical fault scenarios. The E3DLED model from the Delta series is built for integration within electrical distribution panels and switchgear assemblies, featuring a panel-compatible design for structured installation. The breaker’s protection functions are calibrated to detect and interrupt abnormal current conditions, minimizing equipment damage and enhancing overall system safety. Suitable for three-phase power systems requiring reliable breaking capacity, earth leakage detection, and tailored LSIG protection, the Elmeasure E3DLED ACB is engineered to deliver consistent performance and dependable electrical safeguarding.

Type of Product : ACB

Breaking Capacity : 50 kA

Standard : IS/IEC 60947-2 & IEC 60947-2

Type : EDO LSIG Breaker

No. of Pole : 3 Pole

Series : Delta

Application : Industrial

Elmeasure Microprocessor Based LSIG MCCB Ewave Series 3 Pole 400-1000 A Current Rating and 50 kA Breaking Capacity, E3N1250NM

Ships within 60 days

Elmeasure Microprocessor Based LSIG MCCB Ewave Series 3 Pole 50 kA Breaking Capacity, E3-NM (Current 320 to 1250 A)

By ELMEASURE

₹74,339 - ₹1,10,919

The Elmeasure Microprocessor Based LSIG MCCB Ewave Series 3 Pole 50 kA Breaking Capacity, E3-NM is a high-performance molded case circuit breaker designed for advanced protection of three phase electrical distribution systems. With a rated breaking capacity of 50 kA, this MCCB is engineered to safely interrupt very high fault currents, ensuring reliable protection against overload, short circuit, and ground fault conditions. The integrated microprocessor-based LSIG trip unit offers adjustable long time (L), short time (S), instantaneous (I), and ground fault (G) protection functions, enabling precise fault detection and effective coordination within complex power distribution networks. Its three pole configuration ensures simultaneous isolation of all phases for controlled circuit operation. Part of the Ewave Series, the E3-NM features a compact and robust molded case construction suitable for installation in switchboards, panel boards, and industrial control systems. The digital protection mechanism enhances tripping accuracy and maintains consistent performance under varying load demands. Designed for commercial and industrial applications, this MCCB supports dependable arc interruption and stable electrical operation. With microprocessor-based LSIG protection and a 50 kA breaking capacity, the E3-NM ensures structured power distribution management and comprehensive fault protection across high-capacity electrical installations.

Type : Microprocessor Based LSIG

Type of Product : MCCB

Series : Ewave

Breaking Capacity : 50 kA

No. of Pole : 3 Pole

Model No : E3N1250NM

Protection : Inbuilt Instantaneous, Inbuilt ground fault protection from 20% to 50% of In, Adjustable neutral overload protection from 50% to 150% of Ir

Application : Industrial

Standard : IS/IEC 60947-2

Suitable For : Distribution Application

Setting : Adjustable Short-Circuit: 1.5 to 8 x Ir, Adjustable Overload: 0.4 to 1.0 x In