Filter

Clear all
Brand
G-Tech
Categories
Price Range
Min Price:
Max Price:
-
Dimension
Discount
Type of Product
Brands

G-Tech Digital Clamp Meter

Showing 8 out of 8 products

Sort by
₹2,831   ₹2,921
You save ₹90!
3.06% OFF
The G-Tech 36 TRMS 400.0mV-600V 4000Counts Digital Clamp Meter is a high quality digital clamp meter with a wide range of useful functions that should be on the tool belt of any electrician. The unit has a 400 VDC maximum voltage and an AC/DC voltage range that makes it suitable for testing mains voltage, or anything up to 600 VDC. The 4000 counts display provides a resolution of 0.1 V, which is great for getting precise measurements. The unit can also be used to calculate the resistance of a circuit, which can be used to help trace down the malfunction in a circuit or to check whether two circuits are connected to each other. The clamp meter comes with features that are ideal for testing live lines, like an auto power off function after 120 seconds of inactivity, and a capacitance-capacitance continuity test mode that measures the total capacitance in parallel across the leads of the clamp meter (helpful for identifying cables that have multiple wires). It has a user-friendly backlit display, which allows you to use the clamp meter in low light, and is extremely useful when working on difficult-to-reach equipment. This clamp meter has a wide measurement range of 400mV to 600V, making it suitable for most electrical work, and it can measure both AC and DC signals. The G-Tech 36 TRMS 400.0mV-600V 4000Counts Digital Clamp Meter comes with a variety of safety features including an auto shutoff, which activates after ten minutes of non use, and overcharge protection which stops the meter from taking further measurements when it is overloaded.
₹1,475  
The GT6046 is G-Tech's most advanced digital clamp meter, capable of measuring AC/DC voltage and current, DC resistance, frequency, duty cycle, continuity, diode check and temperature. Its 1000V maximum voltage makes it ideal for use on power lines up to 600V. The 2000 count LCD display is easy to read and includes a backlight. The meter can measure up to 1000V DC and 2000A AC (1mA resolution). In addition to measuring voltage AC/DC, resistance, continuity and frequency this digital clamp meter measures capacitance with its integrated test leads. This unit can measure capacitance up to 100uF at 2000V DC. The auto-ranging function means that there is no need to set the proper range before taking a measurement. It measures Voltage, Current, Resistance, and Ground. You can even use it to measure continuity by using the audible continuity test function. With an accuracy of +/-2% this clamp meter is useful in a number of applications such as: AC/DC voltage, AC current, DC voltage, resistance, and continuity check. It includes a backlit display for easy reading in dimly lit areas and has a battery meter that displays remaining battery life when the unit is turned on. The unit also features an over-load protection circuit that prevents damage from being done to the tester by over-loading or damaging its circuitry in any way. It also features built-in safety rubber boots that protect the unit from being damaged by accidentally touching live wiring.
₹4,719   ₹5,133
You save ₹414!
8.07% OFF
The G-Tech GT-2003A+ 1500AMP Current AC Digital Clamp Meter is a general purpose clamp meter with many advanced features. It can measure both current and voltage, and has a built in thermometer that can read temperatures from -40 to 80 C. The display can show up to 12 digits and includes a decimal point. This clamp meter has been designed for the purpose of electrical circuit troubleshooting, wire sizing, and general use according to its Manual. It has many features that will enable the user to carry out various measurements in the most convenient way. The meter offers a bright backlit display that makes it easier to read measurements under low light conditions or areas with poor lighting. The device also includes a built-in flashlight that provides additional illumination when needed. The clamp meter is equipped with a USB port and data hold feature that allows data storage and retrieval via the computer. It consists of numerous protection features such as over temperature, overload, over voltage, short circuit and high input voltage protection. The feature set includes an automatic-save function and a hold function, allowing the user to take extended measurements and still have the data saved for later. It also has the ability to measure multiple voltage levels at once—simplifying tricky AC circuits by allowing you to monitor volts and amps simultaneously.
Recommended Items
sku-leadTime Ships within 10 days
oos-available Ships within 24 hrs
oos-available Ships within 24 hrs
oos-available Ships within 24 hrs
oos-available Ships within 24 hrs
oos-available Ships within 24 hrs
oos-available Ships within 24 hrs
oos-available Ships within 24 hrs
oos-available Ships within 24 hrs
oos-available Ships within 24 hrs
oos-available Ships within 24 hrs
oos-available Ships within 24 hrs
Browsing History
sku-leadTime Ships within 5 days
sku-leadTime Ships within 7 days
sku-leadTime Ships within 3 days
sku-leadTime Ships within 7 days
sku-leadTime Ships within 10 days
sku-leadTime Ships within 6 days
₹44,099 ₹54,600
19.23% OFF

Top Selling G-Tech Digital Clamp Meter Products Price List for March 2026

This data was last updated on 17/03/2026