• Home /
• All Brands /
• Hakko /
• Welding /
• Soldering Spares and Accessories /
• Soldering Spares

Have a question? Call us now at +91 9650660070

Hakko Soldering Spares

Showing 40 out of 42 products

Sort by

Recommended New Price : Low to High Price : High to Low

Ships within 19 days

HAKKO Replacement Heater For Soldering Iron Heater for 331(60W), 331-H

By Hakko

₹1,073  

Add to Cart Buy Now

Ships within 19 days

HAKKO Part Set For Adhesion for FV801, FV801-01, A1568

By Hakko

₹6,725  

Add to Cart Buy Now

Ships within 19 days

HAKKO Chaco Paper for my pen α, B1960

By Hakko

₹1,297  

Add to Cart Buy Now

Ships within 19 days

HAKKO Interface Card for Iron: FN-1010, B5211

By Hakko

₹15,339  

Add to Cart Buy Now

Ships within 19 days

HAKKO Replacement Heater For Red (20 - 40 W Power Consumption)

By Hakko

Set of 5 piece

₹1,049 - ₹2,359

The HAKKO Replacement Heater for Red Soldering Iron is a replacement component designed for compatible HAKKO soldering equipment. It serves as the heating element responsible for generating the heat required for soldering operations, supporting the transfer of thermal energy to the soldering tip. Available for models with power consumption ranging from 20 W to 40 W, this replacement heater is intended for users maintaining compatible soldering irons when the original heating element requires replacement. It is relevant for electronics assembly, circuit board repair, electrical maintenance, and general soldering applications. The HAKKO Replacement Heater is suitable for electronics workshops, technical service centres, repair facilities, and production environments where compatible HAKKO soldering tools are regularly used.
The HAKKO Replacement Heater for Red Soldering Iron is categorized as a spare part for compatible soldering equipment. Its power specification, physical dimensions, electrical characteristics, and fitting arrangement may vary according to the specific model. Before purchasing, users should confirm the exact HAKKO part number, soldering iron model, and required power rating to ensure correct compatibility. Selecting the appropriate heater helps ensure that the replacement component matches the equipment's original specifications. This accessory is relevant for soldering iron maintenance, equipment servicing, and replacement of worn or faulty heating elements. With its 20–40 W power consumption range and HAKKO brand identification, this replacement heater supports the upkeep of compatible soldering equipment used in electronics and electrical work environments.

Type of Product : Replacement Heater For Red

Suitable For : For 40W

Mass (g) : 20

Explore other Variants (4)

Ships within 19 days

HAKKO Junior Heater 80W for 337338, 337H

By Hakko

₹1,073  

Add to Cart Buy Now

Ships within 19 days

HAKKO Junior Iron Point 60W for 331, 331T

By Hakko

₹1,073  

Add to Cart Buy Now

Ships within 19 days

HAKKO Heater 30 W for 321, 321-H(5 Pcs) (Set of 5 Pcs)

By Hakko

Set of 5 piece

₹2,241  

Add to Cart Buy Now

Ships within 19 days

HAKKO Heater 40 W for 325, 325-H(5 Pcs) (Set of 5 Pcs)

By Hakko

Set of 5 piece

₹2,241  

Add to Cart Buy Now

Ships within 19 days

HAKKO Cap Nut for No.984-01, B1784

By Hakko

₹813  

Add to Cart Buy Now

Ships within 19 days

HAKKO Conveyor Belt No Conductivity, A5050

By Hakko

₹36,579  

Add to Cart Buy Now

Ships within 19 days

HAKKO Replacement Parts Protective Pipe for FR-4003, B5221

By Hakko

₹3,539  

Add to Cart Buy Now

Ships within 19 days

HAKKO Conveyor Belt for Hakko 887B, 887-108

By Hakko

₹58,999  

Add to Cart Buy Now

Ships within 19 days

HAKKO N2 (Nitrogen Gas) Station 70x121x134 mm 0.25-2.5L / min. (Flow meter), FX791-01

By Hakko

₹36,579  

Add to Cart Buy Now

Ships within 19 days

HAKKO Crimping Pad for 311, A1224

By Hakko

₹2,241  

Add to Cart Buy Now

Ships within 19 days

HAKKO N2 Generator Generated Nitrogen Gas Concentration/99.9% (Maximum Value) 1.5L/Min., FX780-01

By Hakko

₹1,41,599  

Add to Cart Buy Now

Ships within 19 days

HAKKO 5 Heaters for [Sealer], Pack of 5 Pcs

By Hakko

Pack of 5 piece

₹2,005 - ₹2,005

The HAKKO Sealer Replacement Heater is a heating component designed for use with compatible HAKKO sealing equipment. Supplied in a pack of 5 pieces, this set provides replacement heaters for maintenance and servicing requirements in sealing applications. The heater functions as the heat-generating component of the sealer, supporting the thermal process required for sealing compatible materials. It is relevant for packaging operations, production facilities, industrial workstations, and maintenance departments that use HAKKO sealing equipment. Having multiple replacement heaters available can help users manage routine servicing needs and maintain a supply of compatible spare parts. The HAKKO Sealer Heater Pack is intended for users who require replacement heating components for supported sealing equipment.
The HAKKO Pack of 5 Replacement Heaters for Sealer is categorized as an equipment spare part for compatible sealing systems. Its voltage, power rating, dimensions, heating characteristics, and installation requirements depend on the specific sealer model and heater specification. Before purchasing, users should verify the exact HAKKO part number and compatibility with their sealing equipment to ensure the correct replacement. It is also important to confirm the heater specifications against the original component and the equipment manufacturer's documentation. This five-piece set is suitable for spare-parts inventory, equipment maintenance, and servicing operations in packaging and industrial environments. Selecting the correct replacement heater helps ensure compatibility with the intended HAKKO sealer.

Type of Product : 5 Heaters

Pack of : Pack of 5 Pcs

Mass (g) : 7

Explore other Variants (2)

Ships within 19 days

HAKKO High Heat Capacity Soldering Iron Part FX-9707 24V-200W Composite heater 222 (When Tip T53-D24 is Attached) 1.2 m Cable Length, FX9707-81

By Hakko

₹10,619  

Add to Cart Buy Now

Ships within 19 days

HAKKO Base Yellow With Screw for FM-2032, B5000

By Hakko

₹2,123  

Add to Cart Buy Now

Ships within 19 days

HAKKO Protective Pipe for FX-600, FX-8801, FX-8803, B3469

By Hakko

₹872  

Add to Cart Buy Now

Ships within 19 days

HAKKO Conduction Plate for HAKKO FG-101, 192, B1752

By Hakko

₹1,415  

Add to Cart Buy Now

Ships within 19 days

HAKKO FM-2031 24V-140W Composite Heater 231 (When Trowel 2.4D Type is Attached) 1.2 m Cable Length, FM2031-01

By Hakko

₹18,879  

Add to Cart Buy Now

Ships within 19 days

HAKKO Suction Pad Conductive Silicone Rubber (Set of 5 Pcs)

By Hakko

Set of 5 piece

₹1,651 - ₹1,651

The HAKKO Suction Pad is a replacement accessory made from conductive silicone rubber and supplied as a set of 5 pieces. Designed for use with compatible HAKKO equipment, these suction pads serve as contact components for applications requiring a suitable gripping or holding surface. The conductive silicone rubber construction distinguishes them from standard non-conductive suction pads and makes them relevant for equipment setups where conductive material properties are required. Suitable for compatible electronics handling, assembly, and industrial workstation applications, the HAKKO Suction Pad Set provides replacement components for routine equipment maintenance. Its five-piece pack offers multiple pads for replacement or servicing requirements in technical workshops, production facilities, and electronics manufacturing environments.
The HAKKO Conductive Silicone Rubber Suction Pad Set is categorized as an equipment accessory and replacement consumable. The pad dimensions, shape, connection arrangement, and compatible equipment models depend on the specific product designation and should be verified before ordering. Users should check the exact HAKKO part number and equipment compatibility to ensure the pads fit the intended application. The conductive material specification is an important selection consideration for users who require conductive contact components in their work setup. This set of 5 suction pads is relevant for maintaining compatible HAKKO equipment used in electronics assembly, component handling, and industrial operations. Selecting the correct replacement pads helps support proper fitment and the intended function of the equipment.

Type of Product : Suction Pad

Material : Conductive silicone rubber

Pack of : Set of 5 Pcs

Explore other Variants (2)

Ships within 19 days

HAKKO FM-2030 24V-140W Composite Heater 224 (When Trowel 2.4D Type is Attached) 1.3 m Cable Length, FM2030-01

By Hakko

₹8,731  

Add to Cart Buy Now

Ships within 19 days

HAKKO Heater Roller Type 50W SP for 305, 305-H (50W)

By Hakko

₹1,014  

Add to Cart Buy Now

Ships within 19 days

HAKKO Heater 100V-300W for 363(300W), 363-H

By Hakko

₹1,887  

Add to Cart Buy Now

Ships within 19 days

HAKKO Heater 200 W for 357358359, 357-H

By Hakko

₹1,769  

Add to Cart Buy Now

Ships within 19 days

HAKKO Heater 100V-150W

By Hakko

₹1,651 - ₹2,241

The HAKKO 100V-150W Heater is a replacement heating component designed for compatible HAKKO soldering or industrial heating equipment. Operating at a rated voltage of 100V with a power specification of 150W, this heater is intended to generate the thermal energy required for the corresponding equipment's operation. It serves as an essential component within compatible heating assemblies and may be used when an existing heater requires replacement due to wear, damage, or equipment maintenance needs. The HAKKO heater is relevant for technical workshops, electronics manufacturing facilities, industrial maintenance departments, and service centres that use compatible HAKKO equipment. Its clearly specified voltage and power ratings help users identify the required electrical specifications when sourcing a replacement component.
The HAKKO Heater 100V-150W is categorized as an electrical heating spare part rather than a standalone heating device. Correct equipment compatibility is essential when selecting this replacement component, as heater dimensions, connection terminals, mounting arrangements, and operating characteristics may vary between models. Before purchasing, users should verify the exact HAKKO part number, supported equipment model, rated voltage, and power consumption against the official product documentation. The 100V specification should also be matched to the equipment's intended power supply. This replacement heater is suitable for maintenance and servicing applications where a compatible 150W heating element is required. Selecting the correct component helps ensure appropriate integration into the designated HAKKO equipment.

Type of Product : Heater 100V-150W

Explore other Variants (2)

Ships within 19 days

HAKKO Cleaning Drill

By Hakko

₹1,651 - ₹1,651

The HAKKO Cleaning Drill is a maintenance accessory designed for cleaning compatible HAKKO soldering and desoldering equipment. It is used to help remove accumulated solder residue and blockages from suitable nozzle openings, internal passages, or other designated equipment components. Regular cleaning helps maintain clear pathways and supports the routine upkeep of soldering and desoldering tools used in electronics workshops, repair centres, and manufacturing facilities. As part of the HAKKO maintenance accessory range, this cleaning drill provides a dedicated tool for equipment servicing and cleaning tasks. It is relevant for technicians and maintenance professionals who regularly work with compatible HAKKO equipment and require suitable accessories for routine cleaning operations.
The HAKKO Cleaning Drill is categorized as an equipment cleaning and maintenance accessory rather than a general-purpose drilling tool. Its size, design, and compatibility depend on the specific HAKKO equipment model and the component or passage it is intended to clean. Before purchasing, users should verify the exact part number, drill diameter, and supported equipment series to ensure proper application. Using the appropriate cleaning accessory helps avoid selecting an unsuitable tool for delicate equipment components. This product is relevant for desoldering equipment maintenance, nozzle cleaning, solder residue removal, and routine servicing in electronics repair and industrial production environments. Its HAKKO brand identification makes it suitable for users seeking a compatible cleaning accessory for supported soldering or desoldering systems.

Type of Product : Cleaning Drill

Explore other Variants (4)

Ships within 19 days

HAKKO Cleaning Pin for 474, 475, 701, 484, 808

By Hakko

₹1,061 - ₹1,061

The HAKKO Cleaning Pin is a maintenance accessory designed for use with compatible HAKKO desoldering and soldering equipment, including the 474, 475, 701, 484, and 808 models. It is intended for cleaning suitable openings and passages within the equipment's nozzle or desoldering assembly, helping remove accumulated solder residue and maintain clear pathways. Regular cleaning is an important part of equipment maintenance, particularly in desoldering applications where solder particles and residue may collect during repeated use. The HAKKO Cleaning Pin is suitable for electronics repair workshops, production facilities, technical service centres, and maintenance departments that use compatible HAKKO equipment. Its dedicated design makes it a useful accessory for routine cleaning and upkeep of supported tools.
The HAKKO Cleaning Pin is categorized as a maintenance and cleaning accessory for compatible HAKKO equipment. Its application depends on the specific equipment model and the corresponding opening or passage that requires cleaning. Before purchasing, users should confirm the exact part number and compatibility with their HAKKO 474, 475, 701, 484, or 808 unit. Selecting the correct cleaning accessory helps ensure a suitable fit and supports appropriate equipment maintenance. This product is relevant for technicians and service professionals involved in desoldering, solder removal, electronic component repair, and routine workstation maintenance. The HAKKO Cleaning Pin provides a dedicated accessory option for maintaining compatible equipment used in electronics assembly, circuit board servicing, and industrial repair operations.

Type of Product : Cleaning Pin

Suitable For : 474, 475, 701, 484, 808

Explore other Variants (4)

Ships within 19 days

HAKKO Cleaning Pin For Heater Type for 474, 475, 701, 808, B1215

By Hakko

₹1,096  

Add to Cart Buy Now

Ships within 19 days

HAKKO Hot Knife Set 40 W 4 mm Diameter, NO.515

By Hakko

₹2,359  

Add to Cart Buy Now

Ships within 19 days

HAKKO Solade 195 mm Length 25 mm Width and 10 mm Thickness, No.600-01 (Set of 3 Pcs)

By Hakko

Set of 3 piece

₹1,415  

Add to Cart Buy Now

Ships within 19 days

HAKKO Regular-Use Iron Holder for Junior / Machires / U 100W / Red / Portable, No.602

By Hakko

₹1,533  

Add to Cart Buy Now

Ships within 19 days

HAKKO Rotating Tip Cleaner AC adapter / DC24V 130mA, FT710-02

By Hakko

₹14,159  

Add to Cart Buy Now

Ships within 19 days

HAKKO Solder Bar (Round Bar) No Flux 3 mm Wire Diameter (Set of 4 Pcs)

By Hakko

Set of 4 piece

₹2,241 - ₹2,241

The HAKKO Solder Bar Round Bar is a soldering material designed for electronics assembly, soldering, and industrial maintenance applications. Featuring a round bar or wire-style form with a 3 mm diameter, this product provides solder material for users who require a flux-free option for their specific soldering processes. Supplied as a set of 4 pieces, it offers a convenient quantity for workshops, repair facilities, and production environments. The no-flux specification means that flux is not included in the solder material, allowing users to select and apply a suitable flux separately according to the requirements of the workpiece and soldering method. The HAKKO Solder Bar is relevant for technicians and professionals involved in electronic connections, component assembly, and general soldering operations.
The HAKKO No-Flux Solder Bar is categorized as a soldering consumable for compatible manual or industrial soldering applications. Its round profile and 3 mm diameter help identify the physical form and size when selecting solder material for a particular process. Supplied in a pack of 4 pieces, it is suitable for maintaining soldering supplies in electronics workshops, manufacturing units, and technical service centres. Before purchasing, users should verify the solder alloy composition, melting temperature, applicable standards, and suitability for the intended application, as these details are not specified in the product title. Selecting the appropriate solder material and using a compatible flux where required helps match the product to the intended soldering task.

Type of Product : Solder Bar (Round Bar)

Pack of : Set of 4 Pcs

Length (mm) : 250

Wire Diameter (mm) : Φ3 mm

Wire Diameter Φ(mm) : 3 mm

Ingredient : No Flux

Explore other Variants (2)

Ships within 19 days

HAKKO Solder Wick Unflux 1.5 m Length (1.5 - 3 mm Line Width)

By Hakko

₹1,002 - ₹1,084

The HAKKO Unflux Solder Wick is a desoldering accessory designed for removing excess solder from printed circuit boards, electronic components, and soldered connections. Supplied in a 1.5 m length, this solder wick is available in line widths ranging from 1.5 mm to 3 mm to suit different solder removal requirements. Its unfluxed construction makes it suitable for applications where users prefer to apply flux separately according to their soldering process. During use, the wick is placed over the solder joint and heated with a compatible soldering iron, allowing molten solder to be absorbed into the braided material. The HAKKO Solder Wick is relevant for electronics repair workshops, circuit board assembly facilities, production environments, and technical maintenance operations.
The HAKKO Solder Wick Unflux is categorized as a consumable desoldering material for electronic repair and rework applications. Its available line widths provide options for working with different solder joint sizes and circuit board layouts, while the 1.5 m length offers a convenient supply for routine maintenance tasks. Since this product is unfluxed, a suitable flux may be required depending on the solder type, component, and working conditions. Before purchasing, users should confirm the required line width and product specification for their application. This desoldering wick is useful for removing unwanted solder, clearing circuit board pads, and preparing connections for component replacement or rework in electronics manufacturing and repair environments.

Type of Product : Solder Wick

Type : Unflux

Length (m) : 1.5

Case : ESD SAFE

Explore other Variants (4)

Ships within 19 days

HAKKO Solder Wick No-Clean Halogen-Free, Flux: No-Clean Type (1.5 - 25 m Length)

By Hakko

₹1,002 - ₹5,309

The HAKKO No-Clean Halogen-Free Solder Wick is a desoldering consumable designed for removing excess solder from printed circuit boards, electronic components, and soldered connections. Featuring a no-clean flux formulation, this solder wick helps absorb unwanted solder without requiring a separate flux-cleaning step under suitable application conditions. Its halogen-free specification makes it relevant for electronics manufacturing and repair processes where halogen-free materials are required. The wick is used by applying it to a solder joint with a heated soldering iron, allowing molten solder to be absorbed into the braided material. Available in lengths ranging from 1.5 m to 25 m, the HAKKO Solder Wick offers different quantity options for electronics workshops, production facilities, and technical maintenance operations.
The HAKKO Halogen-Free No-Clean Solder Wick is suitable for electronic assembly, circuit board rework, component replacement, and solder removal applications. Its no-clean flux type is designed to reduce the need for post-soldering flux cleaning, subject to the requirements of the specific process. The halogen-free formulation is an important selection consideration for users following applicable material and manufacturing requirements. Before purchasing, users should verify the required wick length, product designation, and compatibility with their soldering and desoldering workflow. This HAKKO desoldering wick is a practical consumable for technicians and repair professionals who need to clear solder from pads, remove excess solder, and prepare circuit board connections for component installation or replacement.

Type of Product : Solder Wick

Type : No-Clean Halogen-Free, Flux: No-Clean Type

Voltage Application : Pressure and humidity resistance test: No migration occurred (JIS Z 3197)

Insulation Resistance : 1x108Ω or more (JIS Z 3197)

Copper Plate Corrosion : Passed (JIS Z 3197)

Classification : Flux: ROM1 (IPC J-STD-004C)

Content : Halide: 0%

Explore other Variants (8)

Ships within 19 days

HAKKO Solder Wick No Clean, Flux: No Cleaning Type for Breakthrough in Less Than 50% of The Test Range (IPC-TM-650) (1.5 - 25 m Length)

By Hakko

₹1,002 - ₹5,309

The HAKKO No-Clean Solder Wick is a desoldering consumable designed for removing unwanted solder from printed circuit boards, electronic components, and soldered connections. Featuring no-clean flux, this solder wick supports solder removal without requiring a separate flux-cleaning step under the specified application conditions. It is suitable for electronics assembly, circuit board rework, component replacement, and repair operations where excess solder needs to be absorbed from a connection. The product is specified as a no-clean type with flux breakthrough in less than 50% of the test range according to IPC-TM-650. Available in lengths ranging from 1.5 m to 25 m, the HAKKO Solder Wick provides different quantity options for electronics workshops, manufacturing facilities, and technical maintenance environments.
The HAKKO Solder Wick is intended for technicians, repair professionals, and production teams involved in soldering and desoldering work. Its braided wick construction is designed to absorb molten solder when applied to a heated solder joint using a compatible soldering iron. The no-clean flux formulation helps simplify the desoldering process by reducing the need for post-process flux cleaning, subject to the requirements of the application and relevant process standards. Before purchasing, users should confirm the required wick length, product designation, and suitability for their soldering task. This HAKKO no-clean desoldering wick is relevant for removing excess solder, clearing solder pads, and preparing circuit board connections for component replacement or rework.

Type of Product : Solder Wick

Type : No Clean, Flux: No Cleaning Type

Suitable For : Breakthrough in less than 50% of the test range (IPC-TM-650)

Voltage Application : Pressure and humidity resistance test: No migration occurred (JIS Z 3197)

Insulation Resistance : 1x108Ω or more (JIS Z 3197)

Copper Plate Corrosion : Passed (JIS Z 3197)

Classification : Flux: ROM1 (IPC J-STD-004C)

Content : Halides: 0.18%

Explore other Variants (8)

Ships within 19 days

HAKKO 2 Pcs Cleaning Brush B for Replacement Parts FT-710, A1567

By Hakko

₹2,241  

Add to Cart Buy Now

Previous Next

Page 1 of 2 results