Have a question? Call us now at +91 9650660070

Hakko Soldering Equipment

Showing 34 out of 34 products

Sort by

HAKKO Station Soldering Iron FX-888DX 100 W, 65 W (26V) 1.2 m Length, FX888DX-81BY

Ships within 24 hrs

HAKKO Station Soldering Iron FX-888DX 100 W, 65 W (26V) 1.2 m Length

By Hakko

₹24,779 - ₹24,779

The HAKKO FX-888DX Station Soldering Iron is a soldering tool component designed for use with the compatible FX-888DX soldering station. It is specified with power ratings of 100 W and 65 W (26 V), along with a cable length of 1.2 m. This soldering iron is intended for electronic assembly, PCB soldering, component installation, and repair applications that require a compatible handpiece for the FX-888DX system. Its model designation helps users identify the appropriate tool for their soldering station, while the stated electrical ratings and cable length provide important information for equipment selection. It is suitable for electronics technicians, production operators, and maintenance professionals working with compatible HAKKO soldering equipment.
HAKKO FX-888DX Station Soldering Iron is relevant to electronics manufacturing, circuit board assembly, solder joint repair, and technical servicing operations. The 1.2 m cable provides the connection between the soldering iron and its compatible station, allowing the handpiece to be positioned within the workstation according to the available cable reach. The specified 100 W and 65 W (26 V) ratings should be checked against the station's requirements before use or replacement. Before purchasing, verify the connector, compatible replacement tips, handpiece configuration, and exact specifications through HAKKO's official documentation. Selecting the correct soldering iron component helps ensure proper compatibility with the FX-888DX station and its intended soldering applications.

Heater : Ceramic heater

Specifications : Attached Tip: B Type (Product Number T18-B)

Ripple Temperature : ±1 (at no load) (when set between 200 and 480℃)

Type of Product : Station Soldering Iron FX-888DX

Temperature Range (℃) : (Setting) 50-480

Power Supply : AC 100V 50/60Hz

Resistance between Iron Tip and Ground (Ω) : <2

Cable Length (m) : 1.2 m

Output : Station part: AC 26V

Plug shape : 2-pole grounding type plug

Leakage Voltage (mV) : <2 mV

Power Consumption (W) : 100 W, 65 W (26V)

Hakko Soldering Iron FM2028 70 W 1.2 m Cable Length For FX-950, FX-951, FX-952, FM2028-01

Ships within 24 hrs

Hakko Soldering Iron FM2028 70 W 1.2 m Cable Length For FX-950, FX-951, FX-952

By Hakko

Set of 1 piece

₹6,725 - ₹33,039

The Hakko FM-2028 Soldering Iron is a 70 W soldering tool designed for compatibility with Hakko FX-950, FX-951, and FX-952 soldering stations. Featuring a 1.2 m cable, this soldering iron provides a connection to the compatible control station for professional soldering applications. It is intended for electronics assembly, PCB repair, component installation, and precision soldering tasks in manufacturing and maintenance environments. The FM-2028 model designation helps identify the correct tool for the specified Hakko equipment, while its 70 W power rating provides an important reference for selecting a suitable soldering solution. Its dedicated station compatibility makes it relevant to technicians and electronics professionals using the listed Hakko models.
Hakko FM-2028 Soldering Iron is suitable for electronic component soldering, circuit board assembly, repair operations, and technical rework applications. The 1.2 m cable supports the physical connection between the soldering iron and its compatible station, allowing it to be positioned at the workstation according to the cable length. Its compatibility with FX-950, FX-951, and FX-952 models is an important consideration when selecting a replacement or additional soldering tool. Before purchase, verify the connector, compatible handpiece configuration, replacement tip requirements, and operating specifications through Hakko's official documentation. This 70 W Hakko soldering iron is intended for use with the specified stations and should not be assumed to work with other models without compatibility confirmation.

Type of Product : Soldering Iron FM2028

Power Consumption : 70 W (24 V)

Heater : Composite Heater

Temperature Setting Range : 200 - 450℃

Cable Length : 1.2 m

Suitable For : FX-950, FX-951, FX-952

Resistance between Iron Tip and Ground (Ω) : < 2 Ω

Leakage Voltage (mV) : < 2 mV

Hakko 67 W Adjustable Temperature Controlled Soldering Iron, FX601-02

Ships within 4 days

Hakko 67 W Adjustable Temperature Controlled Soldering Iron, FX601-02

By Hakko

₹9,793 ~~₹18,999~~

You save ₹9,206!

48.46% OFF

the Hakko 67 W Adjustable Temperature Controlled Soldering Iron, FX601-02, expertly engineered by Hakko for performance and reliability. Designed for both professionals and hobbyists, this advanced tool belongs to the Soldering Tools & Accessories category and features a powerful 67-watt heater with adjustable temperature control for precise thermal management across a wide range of soldering tasks. Compact and lightweight, the Hakko 67 W Adjustable Temperature Controlled Soldering Iron, FX601-02 delivers consistent heat recovery and smooth handling, making it ideal for fieldwork, circuit repairs, and fine-detail applications. With user-friendly controls and durable construction, it’s built to perform in demanding environments where accuracy and efficiency matter most. Whether you're working on large joints or delicate electronics, this soldering iron ensures fast, stable, and clean results every time.

Hakko Heater Soldering Iron With Lead Free Tip, 6 mm Blue, ESD-HAKKO-16

Ships within 4 days

Hakko Heater Soldering Iron With Lead Free Tip, 6 mm Blue, ESD-HAKKO-16

By Hakko

₹4,365 ~~₹4,999~~

You save ₹634!

12.68% OFF

the Hakko Heater Soldering Iron With Lead Free Tip, 6 mm Blue, ESD-HAKKO-16, a high-performance tool from the trusted Hakko brand. Designed for professional and industrial use, this soldering iron falls under the Soldering Tools & Accessories category and features a 6 mm lead-free tip, ideal for eco-conscious work environments. The anti-static (ESD-safe) blue handle offers both ergonomic comfort and protection against electrostatic discharge, ensuring reliable performance on sensitive electronics. Crafted with advanced heating technology, the Hakko Heater Soldering Iron With Lead Free Tip, 6 mm Blue, ESD-HAKKO-16 ensures rapid heat-up and consistent thermal recovery for uninterrupted operation. Whether you’re assembling PCBs or conducting delicate repair work, this tool guarantees clean, strong joints with every use. Experience the perfect balance of safety, speed, and sustainability in a compact, user-friendly design trusted by professionals worldwide.

Related Searches

hakko soldering iron

hakko soldering station

Hakko Bit Shape 2.4D Flat Blade Soldering Iron 5x 14mm, T18-D24

Ships within 3 days

Hakko Bit Shape 2.4D Flat Blade Soldering Iron 5x 14mm, T18-D24

By Hakko

₹1,297

Hakko Bit Shape 2.4D Flat Blade Soldering Iron 5x 14mm, T18-D24 A soldering iron is a hand tool used for joining or "soldering" two or more pieces of metal, typically electronic components, wires, or electrical connections, by melting a filler material called solder. Soldering is joint in electronics, electrical work, plumbing, metalwork, jewellery, and various other applications Heating Element: Soldering irons are equipped with a heating element, usually made of copper or ceramic, that heats up to a controlled temperature for melting solder Temperature Control: Many soldering irons feature adjustable temperature controls, allowing users to set the right temperature for their soldering task Replaceable Tips: Soldering iron tips, or soldering bits, are replaceable and come in various shapes and sizes to suit different applications Handle: The soldering iron handle is designed for a comfortable grip and often includes heat-resistant materials to prevent burns Stand: A stand or base is typically included to hold the soldering iron when not in use, preventing surface damage and reducing the risk of accidents Electronics Soldering: Soldering irons are widely used in assembly, repair, and prototyping. They allow technicians to connect components on printed circuit boards (PCBs) and make electrical connections Wiring and Cable Soldering: Electricians use soldering irons for joining wires and cables, creating secure and durable connections Plumbing: Plumbers use soldering irons to join pipes and fittings by melting solder to form watertight connections Automotive Repairs: Soldering irons are used for various automotive repairs, such as wiring harnesses, sensors, and circuit board soldering Jewellery Making: Jewelry makers employ soldering irons for connecting metal components when crafting jewellery Crafts and Hobbies: Enthusiasts and hobbyists use soldering irons for various creative projects, including model building, stained glass, and metal sculpture DIY Home Repairs: Soldering irons can be used for minor home repairs, such as fixing broken wires, connectors, or electronic gadgets

Hakko Shape K Knife Blade Soldering Iron Bit 5x 14mm, T18-K

Ships within 3 days

Hakko Shape K Knife Blade Soldering Iron Bit 5x 14mm, T18-K

By Hakko

₹1,599

Hakko Shape K Knife Blade Soldering Iron Bit 5x 14mm, T18-K A soldering iron is a hand tool used for joining or "soldering" two or more pieces of metal, typically electronic components, wires, or electrical connections, by melting a filler material called solder. Soldering is joint in electronics, electrical work, plumbing, metalwork, jewellery, and various other applications Heating Element: Soldering irons are equipped with a heating element, usually made of copper or ceramic, that heats up to a controlled temperature for melting solder Temperature Control: Many soldering irons feature adjustable temperature controls, allowing users to set the right temperature for their soldering task Replaceable Tips: Soldering iron tips, or soldering bits, are replaceable and come in various shapes and sizes to suit different applications Handle: The soldering iron handle is designed for a comfortable grip and often includes heat-resistant materials to prevent burns Stand: A stand or base is typically included to hold the soldering iron when not in use, preventing surface damage and reducing the risk of accidents Electronics Soldering: Soldering irons are widely used in assembly, repair, and prototyping. They allow technicians to connect components on printed circuit boards (PCBs) and make electrical connections Wiring and Cable Soldering: Electricians use soldering irons for joining wires and cables, creating secure and durable connections Plumbing: Plumbers use soldering irons to join pipes and fittings by melting solder to form watertight connections Automotive Repairs: Soldering irons are used for various automotive repairs, such as wiring harnesses, sensors, and circuit board soldering Jewellery Making: Jewelry makers employ soldering irons for connecting metal components when crafting jewellery Crafts and Hobbies: Enthusiasts and hobbyists use soldering irons for various creative projects, including model building, stained glass, and metal sculpture DIY Home Repairs: Soldering irons can be used for minor home repairs, such as fixing broken wires, connectors, or electronic gadgets

Hakko T18-B Shape B Series Conical Tip, R 0.2mm x 22.5mm Soldering Iron Bit

Ships within 3 days

Hakko T18-B Shape B Series Conical Tip, R 0.2mm x 22.5mm Soldering Iron Bit

By Hakko

₹1,120

Hakko T18-B Shape B Series Conical Tip, R 0.2mm x 22.5mm Soldering Iron Bit A soldering iron is a hand tool used for joining or "soldering" two or more pieces of metal, typically electronic components, wires, or electrical connections, by melting a filler material called solder. Soldering is joint in electronics, electrical work, plumbing, metalwork, jewellery, and various other applications Heating Element: Soldering irons are equipped with a heating element, usually made of copper or ceramic, that heats up to a controlled temperature for melting solder Temperature Control: Many soldering irons feature adjustable temperature controls, allowing users to set the right temperature for their soldering task Replaceable Tips: Soldering iron tips, or soldering bits, are replaceable and come in various shapes and sizes to suit different applications Handle: The soldering iron handle is designed for a comfortable grip and often includes heat-resistant materials to prevent burns Stand: A stand or base is typically included to hold the soldering iron when not in use, preventing surface damage and reducing the risk of accidents Electronics Soldering: Soldering irons are widely used in assembly, repair, and prototyping. They allow technicians to connect components on printed circuit boards (PCBs) and make electrical connections Wiring and Cable Soldering: Electricians use soldering irons for joining wires and cables, creating secure and durable connections Plumbing: Plumbers use soldering irons to join pipes and fittings by melting solder to form watertight connections Automotive Repairs: Soldering irons are used for various automotive repairs, such as wiring harnesses, sensors, and circuit board soldering Jewellery Making: Jewelry makers employ soldering irons for connecting metal components when crafting jewellery Crafts and Hobbies: Enthusiasts and hobbyists use soldering irons for various creative projects, including model building, stained glass, and metal sculpture DIY Home Repairs: Soldering irons can be used for minor home repairs, such as fixing broken wires, connectors, or electronic gadgets

Hakko Temperature Controlled Soldering Iron 50 W, FX600-02

Ships within 7 days

Hakko Temperature Controlled Soldering Iron 50 W

By Hakko

₹6,017 - ₹7,079

The Hakko Temperature Controlled Soldering Iron is a 50 W soldering tool designed for electronic assembly, repair, and maintenance applications requiring controlled heating. Its temperature-controlled operation allows the soldering process to be managed according to the requirements of the task and compatible equipment configuration. With a specified power rating of 50 W, this soldering iron is suitable for applications involving electronic components, PCB connections, wire terminals, and soldered joints. It is intended for technicians, electronics repair professionals, and production workstations that require a dedicated soldering tool for routine and precision soldering operations. The 50 W rating provides an important reference when evaluating the tool's power requirements and suitability for a particular workstation.
Hakko 50 W Temperature Controlled Soldering Iron is relevant to PCB assembly, electronic component installation, circuit repair, and equipment servicing environments. Temperature control is an important feature for soldering applications where heat management must be considered to suit the components and materials being worked on. The tool can be incorporated into compatible soldering setups according to its specified operating requirements. Before purchase, verify the exact model, temperature adjustment range, operating voltage, compatible soldering tips, and connection requirements through Hakko's official product documentation. These specifications may vary depending on the particular model. Selecting the correct configuration helps ensure that the soldering iron matches the intended application and equipment. This Hakko soldering iron combines a 50 W power rating with temperature-controlled operation for compatible electronics soldering tasks.

Weight : 61 g

Type of Product : Temperature Controlled Soldering Iron

Power Consumption : 50 W

Heater : Ceramic Heater

Ripple Temperature : ± 1℃ at No Load

Temperature Setting Range : 200 - 500℃

Input Power : 100 V AC (50/60 Hz)

Set Contents : Body, Lock Key

Overall Length : 233 mm

Standard Iron Tip : Type B (No.T18-B)

Hakko 60 W Soldering Iron Lead-Free with Stand Red, No.503

Ships within 30 days

Hakko 60 W Soldering Iron Lead-Free with Stand Red, No.503

By Hakko

₹1,769 ~~₹2,999~~

You save ₹1,230!

41.01% OFF

the Hakko 60 W Soldering Iron Lead-Free with Stand Red, No.503 is an essential tool in the Soldering Tools & Accessories category. Powered by a robust 60-watt heater, it offers reliable temperature stability for lead-free soldering, making it ideal for environmentally conscious electronics work. The striking red design stands out on any workstation, while the included stand ensures safe, organized storage during use. Backed by the precision engineering of Hakko, the Hakko 60 W Soldering Iron Lead-Free with Stand Red, No.503 is perfect for users who demand consistent heat delivery and ergonomic control. From DIY repairs to professional assembly tasks, this tool combines efficiency with eco-friendly functionality, offering smooth handling and long-term dependability. It’s a smart investment for anyone looking to solder with confidence and style.

Hakko Temperature Controlled Soldering Iron 47 W, FX601-03

Ships within 18 days

Hakko Temperature Controlled Soldering Iron 47 W

By Hakko

₹7,433 - ₹7,433

The Hakko Temperature Controlled Soldering Iron is a 47 W electric soldering tool designed for electronic assembly, repair, and maintenance applications. Its temperature-controlled operation supports soldering tasks where managing heat according to the requirements of the components and materials is important. With a specified power rating of 47 W, this soldering iron is intended for applications involving PCB connections, electronic components, wire terminals, and general soldered joints. It is suitable for electronics technicians, repair professionals, and maintenance workstations that require a dedicated soldering tool with controlled heating. The 47 W specification provides a key reference for identifying the product and evaluating its power requirements for the intended working environment.
Hakko 47 W Temperature Controlled Soldering Iron is relevant to electronics manufacturing, circuit board assembly, component replacement, and technical servicing operations. Temperature control is useful in soldering processes where appropriate heat management is required for different connection types and component applications. The tool should be used according to its designated operating specifications and compatible equipment configuration. Before purchase, verify the exact model, temperature adjustment range, operating voltage, compatible soldering tips, and connection requirements through Hakko's official product documentation. These details may differ between models within the product range. Selecting the correct configuration helps ensure suitability for the intended soldering application. This Hakko temperature controlled soldering iron offers a 47 W power rating for compatible electronic soldering and maintenance work.

Weight : 68 g

Type of Product : Temperature Controlled Soldering Iron

Power Consumption : 47 W

Heater : Ceramic Heater

Ripple Temperature : No Load / ± 1℃

Temperature Setting Range : 240 - 540℃

Input Power : 100 V AC (50/60 Hz)

Set Contents : Body, Lock Key, Instruction Manual

Hakko Soldering Iron 20 W, Φ3×65 mm Iron Tip Size, 500 (6) (Set of 6)

Ships within 19 days

HAKKO Soldering Iron Red (20 - 60 W Power Consumption)

By Hakko

Set of 6 piece

₹1,887 - ₹9,439

The HAKKO Red Soldering Iron is an electric soldering tool specified with a power consumption range of 20 W to 60 W. Designed for soldering applications, this tool is suitable for electronic assembly, electrical connections, component installation, and general repair work. Its red exterior provides a distinctive product appearance, while the stated power consumption range helps users identify the electrical power requirements when selecting a suitable soldering iron. The tool is intended for applications involving the heating and joining of metal components using solder. It can be used in electronics workshops, maintenance departments, production environments, and repair workstations where a conventional electric soldering iron is required. The exact operating characteristics depend on the specific model and its rated configuration.
HAKKO Red Soldering Iron is relevant to electronics servicing, PCB assembly, wire soldering, electrical maintenance, and general soldering tasks. The 20–60 W power consumption specification is an important consideration when matching the tool to the required application and available electrical supply. It is suitable for users who need a dedicated soldering iron for routine joining and repair operations. Before purchase, verify the exact model, operating voltage, tip compatibility, temperature characteristics, and other technical details through the manufacturer's product documentation. Selecting an appropriate power rating and compatible replacement tip helps ensure that the soldering iron meets the requirements of the intended task. This HAKKO soldering iron is identified by its red finish and specified 20 W to 60 W power consumption range.

Color : Red

Input Power : AC100 V (50/60Hz)

Included Components : Simple Trowel Stand x 1

Hakko Soldering Iron Junior 80 W, Φ8 mm Iron Tip Size, 337 (6) (Set of 6)

Ships within 19 days

HAKKO Soldering Iron Junior (80 - 100 W Power Consumption)

By Hakko

Set of 6 piece

₹2,713 - ₹11,799

The HAKKO Junior Soldering Iron is an electric soldering tool specified with a power consumption range of 80 W to 100 W. Designed for soldering and joining applications, this tool provides a higher power range than lower-wattage soldering iron models. It is suitable for electrical maintenance, metal connection work, component assembly, and repair tasks that require a compatible soldering tool. The Junior designation identifies this particular product category within the HAKKO soldering iron range, while the stated power consumption helps users evaluate its electrical requirements for the intended workstation. It is relevant to technicians, maintenance professionals, and workshop users who require an electric soldering iron for regular soldering operations.
HAKKO Junior Soldering Iron can be used in electrical workshops, equipment maintenance, manufacturing environments, and repair applications involving soldered connections. Its 80–100 W power consumption range is an important specification when selecting the tool for a particular soldering requirement. The appropriate application depends on the materials, connection size, and working conditions involved. Before purchase, verify the exact model, operating voltage, compatible replacement tips, temperature characteristics, and other technical specifications through HAKKO's official product documentation. Selecting the correct soldering iron configuration helps ensure compatibility with the intended electrical supply and soldering task. This HAKKO Junior model is identified by its 80 W to 100 W power consumption range and is intended for compatible soldering applications.

Type of Product : Soldering Iron Junior

Input Power : AC100 V (50/60Hz)

HAKKO Soldering Iron Part N2 For FN-1010 95 W (21V) 1.2 m Length, FN1102-81

Ships within 19 days

HAKKO Soldering Iron Part N2 For FN-1010 95 W (21V) 1.2 m Length, FN1102-81

By Hakko

₹34,219

HAKKO Soldering Iron Part For FN-1010 95 W (21V) for Iron tip: T36 Series, FN1101-81

Ships within 19 days

HAKKO Soldering Iron Part For FN-1010 95 W (21V) for Iron tip: T36 Series, FN1101-81

By Hakko

₹24,779

HAKKO 373 100 V 2-Pole Grounded Plug 6 W for Can be Used up to 1 Kg of Wound Solder, 373-1

Ships within 19 days

HAKKO 373 100 V 2-Pole Grounded Plug 6 W for Can be Used up to 1 Kg of Wound Solder, 373-1

By Hakko

₹43,659

HAKKO Soldering Iron FX-600D 47 W, FX600D-813

Ships within 19 days

HAKKO Soldering Iron FX-600D 47 W

By Hakko

₹9,793 - ₹11,327

The HAKKO FX-600D Soldering Iron is a 47 W electric soldering tool designed for electronics assembly, repair, and maintenance applications. Identified by its FX-600D model designation, this soldering iron is suitable for tasks involving electronic components, printed circuit boards, wire connections, and soldered joints. Its 47 W power rating provides a reference for evaluating the tool's electrical requirements and suitability for different soldering applications. The FX-600D belongs to HAKKO's soldering iron range and is intended for technicians, electronics repair professionals, and workshop users who require a dedicated tool for routine soldering operations. Its model-specific identification also helps users select compatible replacement parts and accessories.
HAKKO FX-600D 47 W Soldering Iron is relevant to PCB assembly, electronic component installation, circuit repair, and general maintenance work. It can be used in electronics workshops, production environments, and technical service facilities where controlled soldering operations are required. The exact operating characteristics and suitable applications should be evaluated according to the product's specifications and the materials being soldered. Before purchase, verify the operating voltage, temperature adjustment range, compatible replacement tips, and other technical details using HAKKO's official FX-600D documentation. Selecting the appropriate tip and following the manufacturer's operating instructions are important for maintaining the intended equipment configuration. This 47 W HAKKO soldering iron is identified by the FX-600D model number for accurate product selection and compatibility checks.

Type of Product : Soldering Iron FX-600D

Specifications : Attached Tip: B Type (Product Number T18-B)

Heater : Ceramic heater

Ripple Temperature : ±1℃ (at no load)

Temperature Range (℃) : (Setting) 200-540

Power Supply : AC100V 50/60Hz

Mass (g) : 65 (with tip T18-B type)

Power Consumption (W) : 47 W

Overall Length (mm) : 233 (with tip T18-B type)

HAKKO Soldering Iron Part FX-8806 Conversion Kit 95 W (26V) 1.2 m Length, FX8806-811

Ships within 19 days

HAKKO Soldering Iron Part FX-8806 Conversion Kit 95 W (26V) 1.2 m Length, FX8806-811

By Hakko

₹17,699

HAKKO Soldering Iron Part FX-8806 95 W (26V) 1.2 m Length, FX8806-81

Ships within 19 days

HAKKO Soldering Iron Part FX-8806 95 W (26V) 1.2 m Length, FX8806-81

By Hakko

₹11,681

HAKKO Soldering Iron FX-888DX Without Iron Part 100 W, 65 W (26V) 1.2 m Length, FX888DX-811SV

Ships within 19 days

HAKKO Soldering Iron FX-888DX Without Iron Part 100 W, 65 W (26V) 1.2 m Length

By Hakko

₹17,699 - ₹18,879

The HAKKO FX-888DX Soldering Iron Without Iron Part is a replacement or equipment component associated with the FX-888DX soldering system. It is specified with power ratings of 100 W and 65 W (26 V), along with a cable length of 1.2 m. This product is intended for users who require the corresponding soldering iron component for maintenance, servicing, or replacement purposes. The FX-888DX model designation helps identify the equipment compatibility, while the stated electrical specifications and cable length provide important details for product selection. It is relevant to electronics technicians, repair professionals, and industrial maintenance workstations that use compatible HAKKO soldering equipment.
HAKKO FX-888DX Soldering Iron Without Iron Part is suitable for soldering equipment maintenance and replacement requirements in electronics assembly, PCB repair, and technical servicing environments. Its specified 1.2 m cable provides the connection length for positioning the compatible soldering iron component within the workstation. The 100 W and 65 W (26 V) ratings should be checked against the equipment's designated electrical requirements before installation or use. Since this product is listed without the iron part, users should carefully review the supplied component details to understand the exact configuration. Verify the compatible model, connector specifications, and replacement part reference through HAKKO's official documentation to ensure correct selection for the FX-888DX system.

Type of Product : Soldering Iron FX-888DX Without Iron Part

Specifications : Attached Tip: B Type (Product Number T18-B)

Heater : Ceramic heater

Ripple Temperature : ±1 (at no load) (when set between 200 and 480℃)

Temperature Range (℃) : (Setting) 50-480

Power Supply : AC 100V 50/60Hz

Resistance between Iron Tip and Ground (Ω) : <2

Leakage Voltage (mV) : <2 mV

Plug shape : 2-pole grounding type plug

Power Consumption (W) : 100 W, 65 W (26V)

Cable Length (m) : 1.2 m

Output : Station part: AC 26V

HAKKO Junior Ji Flat Plug 60 W Type I 271 mm, 331

Ships within 19 days

HAKKO Junior Ji Flat Plug 60 W Type I 271 mm, 331

By Hakko

₹2,595

HAKKO Junior Ji Flat Plug 30 WType I 237 mm, 321

Ships within 19 days

HAKKO Junior Ji Flat Plug 30 WType I 237 mm, 321

By Hakko

₹2,241

HAKKO Soldering Iron Section 95 W (24V) for FX-971/ FX-972, FX9701-81

Ships within 19 days

HAKKO Soldering Iron Section 95 W (24V) for FX-971/ FX-972, FX9701-81

By Hakko

₹8,613

HAKKO N2 Soldering Iron (For Nitrogen Gas) 70 W (24V) Conversion Kit, FM2026-05

Ships within 19 days

Hakko N2 Soldering Iron (For Nitrogen Gas)

By Hakko

₹15,339 - ₹21,239

The Hakko N2 Soldering Iron is a specialised soldering tool designed for use with nitrogen gas in compatible Hakko soldering systems. It is intended for electronic soldering applications where a nitrogen gas supply is incorporated into the soldering process. The N2 designation identifies its nitrogen-compatible configuration, distinguishing it from conventional soldering irons designed for standard operation. This tool is relevant to electronics manufacturing, PCB assembly, component installation, and professional repair environments that use nitrogen-assisted soldering equipment. It provides a dedicated handpiece option for users working with compatible Hakko systems and requiring a soldering iron configured for nitrogen gas applications. Equipment and accessory compatibility should be considered when selecting this specialised soldering tool.
Hakko N2 Soldering Iron is suitable for specialised electronic assembly, solder joint processing, circuit board maintenance, and precision rework applications involving nitrogen gas. Nitrogen-assisted soldering may be used as part of a controlled soldering process, depending on the equipment setup and application requirements. The tool should be connected only to a compatible Hakko station and the specified nitrogen gas supply arrangement. Before purchase, verify the supported station model, gas connection requirements, compatible soldering tips, and operating specifications using Hakko's official technical documentation. The exact configuration and accessories may vary depending on the product version. This Hakko nitrogen soldering iron is intended for professional applications requiring a compatible N2 soldering tool rather than general-purpose use with standard soldering equipment.

Type of Product : N2 Soldering Iron (For Nitrogen Gas)

Heater : Composite heater

Temperature Setting Range : 200 - 450℃

Resistance between Iron Tip and Ground (Ω) : ＜2

Leakage Voltage (mV) : <2 mV

Power Consumption (W) : 70 W (24V)

Cable Length (m) : 1.2 m

Ships within 19 days

HAKKO Iron Brush for my pen α, B1959

By Hakko

₹1,415

HAKKO Junior Soldering Iron Set 100V-30W Flat P 30 W, 710

Ships within 19 days

HAKKO Junior Soldering Iron Set 100V-30W Flat P 30 W, 710

By Hakko

₹2,359

HAKKO Junior Jk 100V-80W Flat Plug 80 W 270 mm Length, 338(338JK)

Ships within 19 days

HAKKO Junior Jk 100V-80W Flat Plug 80 W 270 mm Length, 338(338JK)

By Hakko

₹2,713

HAKKO Junior Jk 100V-60W Flat Plug 60 W 270 mm Length, 332(332JK)

Ships within 19 days

HAKKO Junior Jk 100V-60W Flat Plug 60 W 270 mm Length, 332(332JK)

By Hakko

₹2,595

HAKKO Junior Ji 100V-40W Flat Plug 40 W 237 mm Length, 325(325JI)

Ships within 19 days

HAKKO Junior Ji 100V-40W Flat Plug 40 W 237 mm Length, 325(325JI)

By Hakko

₹2,241

HAKKO Cleaning Sponge for 633-02/635/FH100, A1519

Ships within 19 days

HAKKO Cleaning Sponge for 633-02/635/FH100, A1519

By Hakko

₹860

HAKKO Rework Station 400 W, Soldering Iron 95 W (24V), Desoldering Tool 140 W (24V) 1.2 m Length, FX973-81

Ships within 19 days

HAKKO Rework Station 400 W, Soldering Iron 95 W (24V), Desoldering Tool 140 W (24V) 1.2 m Length, FX973-81

By Hakko

₹2,24,199

Ships within 19 days

HAKKO Ground Wire 1M for FG-470, B5238

By Hakko

₹2,477

HAKKO Micro Hot Air 112 W, Station: 7 W 1.2 m Length, FR850-81

Ships within 19 days

HAKKO Micro Hot Air 112 W, Station: 7 W 1.2 m Length, FR850-81

By Hakko

₹81,419

HAKKO Cleaning Sponge Replacement for 602, 604, 606, 602-029(10 Pcs) (Set of 10 Pcs)

Ships within 19 days

HAKKO Cleaning Sponge Replacement for 602, 604, 606, 602-029(10 Pcs) (Set of 10 Pcs)

By Hakko

Set of 10 piece

₹1,651

HAKKO 374 Solder Feed/Solder Feed Unit 6 W, 374-5

Ships within 19 days

HAKKO 374 Solder Feed/Solder Feed Unit 6 W

By Hakko

₹54,279 - ₹54,279

The HAKKO 374 Solder Feed Unit is a 6 W solder feeding accessory designed for use in compatible soldering equipment and workstations. It is intended to support the controlled feeding of solder wire during soldering operations, helping operators manage solder delivery while working on electronic components and circuit board connections. Identified by the HAKKO 374 model number and a 6 W power rating, this unit is suitable for electronics assembly, PCB production, repair, and maintenance environments where a dedicated solder feeding mechanism is required. Its specialised design makes it relevant to technicians and production operators who perform repetitive soldering tasks and require a compatible solder feed system for their equipment configuration.
HAKKO 374 Solder Feed Unit is applicable to electronics manufacturing, circuit board assembly, component installation, and soldering workstation operations. A dedicated solder feeding unit can support consistent solder wire delivery during compatible soldering processes and help manage manual solder handling. The unit should be selected according to the soldering equipment, solder wire specifications, and intended installation arrangement. Before purchase, verify the operating voltage, solder wire compatibility, feeding mechanism, connection requirements, and supported equipment models through HAKKO's official product documentation. The 6 W rating is an important electrical specification and should be matched to the designated operating requirements. This HAKKO solder feed unit is intended for compatible soldering setups and should not be assumed to work with all soldering iron models.

Type of Product : 374 Solder Feed/Solder Feed Unit

Power Supply : AC100V 50Hz/60Hz

Plug shape : 2-pole installation type plug

Power Consumption (W) : 6 W

Mass (Kg) : 1.6

Mode : Auto / Manual

Time : (Soldering feed time) 0 to 7 seconds

Outer Dimensions (mm) : 107x110x215

Solder Feeding Speed (mm/s) : 4.5 - 26

Length (mm) : (Solder feed amount) 0 to 182, (Soldering return amount) 0 to 5 (Fixed speed)

Page 1 of 1 results