• Home /
• All Brands /
• IMPEL /
• Motors & Power Transmission

Have a question? Call us now at +91 9650660070

IMPEL Motors & Power Transmission

Showing 36 out of 36 products

Sort by

Recommended New Price : Low to High Price : High to Low

Ships within 3 days

IMPEL 3 Phase 6 Pole 960 RPM Foot Mounted IE2 AC Induction Motor (Power 0.5 to 10 HP)

By IMPEL

₹6,961 - ₹57,819

You save ₹7,551!

52.03% OFF

The IMPEL 3 Phase 6 Pole 960 RPM Foot Mounted IE2 AC Induction Motor is designed for three-phase general-purpose equipment requiring a defined 960 RPM operating speed. Its 6-pole arrangement provides the specified rotational characteristic, while the foot-mounted construction offers a conventional base installation for compatible machinery. The IE2 efficiency classification identifies the motor within an established efficiency class for AC induction motors. This configuration is suited to systems where the motor needs to be securely positioned on a suitable mounting surface and mechanically connected to the driven assembly through an appropriate transmission arrangement.With its three-phase AC induction design, the IMPEL 3 Phase 6 Pole 960 RPM Foot Mounted IE2 AC Induction Motor fits applications that call for a standard industrial motor format with clearly defined mounting and speed specifications. The foot mounting provides a practical installation layout for machinery designed around base-supported motors. Its 6-pole construction corresponds with the 960 RPM rating, creating a specific speed profile for compatible equipment. The combination of IMPEL branding, IE2 classification, three-phase operation and foot-mounted construction makes this motor identifiable by key parameters used when matching a general-purpose motor to an industrial drive system.

Series : Casting

Insulation Class : F

Frequency : 50Hz ( ± 5% )

Mounting Type : Foot Mounted

Rated Voltage : 415V (± 10% )

Phase : 3 Phase

Type of Product : AC Induction Motor

Speed : 960 RPM

Pole : 6 Pole

Standard : IS12615:2018

IP Rating : IP55

Efficiency (%) : IE2

Duty Cycle : S1

Explore other Variants (8)

Ships within 5 days

IMPEL 3 Phase 4 Pole 1440 RPM Foot Mounted IE3 AC Induction Motor (Power 0.5 to 10 HP)

By IMPEL

₹5,191 - ₹40,119

You save ₹8,565!

29.92% OFF

The IMPEL 3 Phase 4 Pole 1440 RPM Foot Mounted IE3 AC Induction Motor is designed for industrial machinery requiring a three-phase motor with foot mounting and IE3 efficiency classification. Its 4-pole configuration corresponds to a rated speed of 1440 RPM, providing defined operating parameters for equipment selection. The foot-mounted arrangement allows the motor to be secured onto compatible base plates, frames, or machine structures, making it suitable for installations designed around this mounting style. As a Three Phase General Purpose Motor, it combines an AC induction configuration with specifications suited to a variety of industrial drive applications. The IE3 classification forms an important part of its motor specification for systems where efficiency class is a defined requirement.The IMPEL 3 Phase 4 Pole 1440 RPM Foot Mounted IE3 AC Induction Motor is suitable for compatible equipment such as pumps, fans, conveyors, compressors, machine tools, and material handling systems. Its three-phase configuration is intended for machinery using corresponding industrial electrical supplies, while the foot mounting provides a conventional installation format. The 4-pole design and 1440 RPM rating offer clear reference points when matching the motor with driven equipment. With its combination of foot mounting, IE3 efficiency class, and induction motor design, this IMPEL motor fits general-purpose industrial applications where these specific characteristics are required.

Series : Casting

Insulation Class : F

Frequency : 50Hz ( ± 5% )

Mounting Type : Foot Mounted

Rated Voltage : 415V (± 10% )

Phase : 3 Phase

Type of Product : AC Induction Motor

Speed : 1440 RPM

Pole : 4 Pole

Standard : IS12615:2018

IP Rating : IP55

Efficiency (%) : IE3

Duty Cycle : S1

Explore other Variants (8)

Ships within 6 days

IMPEL 3 Phase 2 Pole 2880 RPM Foot Mounted IE3 AC Induction Motor (Power 0.5 to 10 HP)

By IMPEL

₹5,545 - ₹38,939

You save ₹6,130!

52.51% OFF

The IMPEL 3 Phase 2 Pole 2880 RPM Foot Mounted IE3 AC Induction Motor is designed for industrial machinery where a high-speed three-phase motor with foot mounting and IE3 efficiency classification is required. Its 2-pole configuration corresponds to a rated speed of 2880 RPM, defining the motor's operating profile for compatible equipment. The foot mounting arrangement provides a practical base connection for installation on suitable machine frames, foundations, and fabricated structures. Built as an AC induction motor, it is intended for applications using compatible three-phase electrical systems. The specified pole count, rotational speed, mounting format, and IE3 class provide clear selection criteria when matching the motor with an industrial drive assembly.The IMPEL 3 Phase 2 Pole 2880 RPM Foot Mounted IE3 AC Induction Motor can be used with compatible fans, blowers, pumps, compressors, and other machinery designed around its operating parameters. Its 2880 RPM rating makes it suitable for equipment requiring a faster motor speed, while the foot-mounted design supports integration with machinery bases configured for this mounting method. The IE3 efficiency classification forms part of the motor specification for applications where this efficiency level is required. Its three-phase electrical configuration further defines its intended operating environment. This IMPEL motor combines a 2-pole design, 2880 RPM speed, foot mounting, and IE3 classification for general-purpose industrial applications.

Series : Casting

Insulation Class : F

Frequency : 50Hz ( ± 5% )

Mounting Type : Foot Mounted

Rated Voltage : 415V (± 10% )

Phase : 3 Phase

Type of Product : AC Induction Motor

Speed : 2880 RPM

Pole : 2 Pole

Standard : IS12615:2018

IP Rating : IP55

Efficiency (%) : IE3

Duty Cycle : S1

Explore other Variants (8)

Ships within 30 days

IMPEL 3 Phase 8 Pole 750 RPM Flange Mounted IE2 AC Induction Motor (Power 0.5 to 10 HP)

By IMPEL

₹10,501 - ₹81,419

You save ₹14,286!

48.22% OFF

The IMPEL 3 Phase 8 Pole 750 RPM Flange Mounted IE2 AC Induction Motor is a three-phase general purpose motor intended for industrial equipment requiring a lower rotational speed with a flange-mounted configuration. Its 8-pole design is rated at 750 RPM, making it suitable for machinery specified around this particular speed and pole arrangement. The flange mounting format provides a defined mechanical interface for compatible driven assemblies, allowing the motor to be incorporated into equipment designed for this installation method. With an IE2 efficiency classification, the motor carries a specified efficiency category alongside its AC induction construction. Its three-phase configuration makes it applicable to compatible industrial electrical systems requiring these defined motor characteristics.The IMPEL 3 Phase 8 Pole 750 RPM Flange Mounted IE2 AC Induction Motor can be considered for compatible applications such as pumps, conveyors, fans, processing machinery, and other industrial equipment requiring controlled rotational speed. The 8-pole configuration establishes its 750 RPM operating characteristic, while the flange arrangement supports connection with machinery designed around this mounting interface. Its IE2 classification provides a specific efficiency designation for equipment selection, and the three-phase AC induction format defines its electrical configuration. This IMPEL motor brings together low-speed operation, flange mounting, and an 8-pole design for general-purpose industrial systems where these specifications are required.

Series : Casting

Insulation Class : F

Frequency : 50Hz ( ± 5% )

Mounting Type : Flange Mounted

Rated Voltage : 415V (± 10% )

Phase : 3 Phase

Type of Product : AC Induction Motor

Speed : 750 RPM

Pole : 8 Pole

Standard : IS12615:2018

IP Rating : IP55

Efficiency (%) : IE2

Duty Cycle : S1

Explore other Variants (7)

Related Searches

impel three phase industrial motor

impel three phase general purpose motor 6 pole

impel three phase general purpose motor

impel 4 pole three phase general purpose motor

impel 6 pole three phase general purpose motor

Ships within 30 days

IMPEL 3 Phase 8 Pole 750 RPM Foot Mounted IE2 AC Induction Motor (Power 0.5 to 10 HP)

By IMPEL

₹11,327 - ₹76,699

You save ₹46,965!

52.51% OFF

The IMPEL 3 Phase 8 Pole 750 RPM Foot Mounted IE2 AC Induction Motor is designed for industrial machinery that calls for a three-phase motor with a foot-based installation and a slower rotational profile. Its 8-pole configuration is rated at 750 RPM, providing defined speed characteristics for compatible equipment. The foot mounting arrangement allows the motor to be secured onto suitable foundations, fabricated bases, or machine frames according to the equipment design. Its IE2 efficiency classification forms part of the motor specification, while the AC induction construction supports use in compatible industrial drive systems. As a Three Phase General Purpose Motor, it provides clearly defined electrical, mechanical, and operating parameters for machinery selection.The IMPEL 3 Phase 8 Pole 750 RPM Foot Mounted IE2 AC Induction Motor is applicable to compatible equipment such as conveyors, pumps, fans, processing systems, and other machinery designed for its specified speed and mounting arrangement. The 750 RPM rating and 8-pole configuration establish its operating characteristics, while the foot-mounted format supports installation on equipment bases intended for this style of motor. Its three-phase electrical design corresponds to suitable industrial power systems, and the IE2 classification identifies its efficiency category. This IMPEL motor brings together low-speed operation, conventional foot mounting, and an 8-pole AC induction design for general-purpose industrial applications requiring these specific specifications.

Series : Casting

Insulation Class : F

Frequency : 50Hz ( ± 5% )

Mounting Type : Foot Mounted

Rated Voltage : 415V (± 10% )

Phase : 3 Phase

Type of Product : AC Induction Motor

Speed : 750 RPM

Pole : 8 Pole

Standard : IS12615:2018

IP Rating : IP55

Efficiency (%) : IE2

Duty Cycle : S1

Explore other Variants (7)

Ships within 30 days

IMPEL 3 Phase 6 Pole 960 RPM Flange Mounted IE2 AC Induction Motor (Power 0.5 to 10 HP)

By IMPEL

₹6,961 - ₹60,179

You save ₹29,120!

51.76% OFF

The IMPEL 3 Phase 6 Pole 960 RPM Flange Mounted IE2 AC Induction Motor is a three-phase general purpose motor designed for equipment that requires a steady rotational output at 960 RPM. Its 6-pole configuration supports applications where controlled operating speed is preferred for continuous mechanical movement. The flange-mounted construction allows the motor to be integrated with compatible driven equipment using a suitable mounting arrangement. As an IE2 motor, it is classified for improved efficiency within its designated efficiency class, making it suitable for industrial systems where electrical energy utilisation is an important consideration.Built around an AC induction motor configuration, the IMPEL 3 Phase 6 Pole 960 RPM Flange Mounted IE2 AC Induction Motor can be considered for machinery and general industrial equipment requiring dependable three-phase motor operation. The flange mounting format helps facilitate direct equipment integration while keeping the motor aligned with the connected mechanism. Its 6-pole design and 960 RPM speed specification provide a defined operating profile for compatible applications. This IMPEL motor is suited to general-purpose installations where the motor's mounting type, pole count, rated speed and IE2 efficiency classification match the requirements of the driven system.

Series : Casting

Insulation Class : F

Frequency : 50Hz ( ± 5% )

Mounting Type : Flange Mounted

Rated Voltage : 415V (± 10% )

Phase : 3 Phase

Type of Product : AC Induction Motor

Speed : 960 RPM

Pole : 6 Pole

Standard : IS12615:2018

IP Rating : IP55

Efficiency (%) : IE2

Duty Cycle : S1

Explore other Variants (8)

Ships within 30 days

IMPEL 3 Phase 4 Pole 1440 RPM Flange Mounted IE2 AC Induction Motor (Power 0.5 to 10 HP)

By IMPEL

₹4,837 - ₹37,759

You save ₹18,152!

50.63% OFF

The IMPEL 3 Phase 4 Pole 1440 RPM Flange Mounted IE2 AC Induction Motor is designed for industrial drive systems that require a three-phase motor with a flange mounting configuration and IE2 efficiency class. Its 4-pole construction delivers an operating speed of 1440 RPM, making it suitable for machinery specified around this speed and motor arrangement. The flange interface supports integration with compatible driven equipment where a compact and aligned mounting method is required. As a three-phase general purpose motor, it can be incorporated into various industrial setups that call for an AC induction motor with defined electrical and mechanical characteristics.The IMPEL 3 Phase 4 Pole 1440 RPM Flange Mounted IE2 AC Induction Motor combines a standard induction motor configuration with IE2 efficiency classification for applications where motor efficiency is part of the equipment specification. Its flange-mounted format makes it relevant to compatible pumps, machine assemblies, conveyors, fans, compressors, and other industrial machinery. The 4-pole design and 1440 RPM rating provide clear selection parameters for equipment integration, while the three-phase configuration corresponds to industrial power systems designed for such motors. This IMPEL motor is suited to applications requiring a flange-mounted general purpose motor with the specified speed and IE2 class.

Series : Casting

Insulation Class : F

Frequency : 50Hz ( ± 5% )

Mounting Type : Flange Mounted

Rated Voltage : 415V (± 10% )

Phase : 3 Phase

Type of Product : AC Induction Motor

Speed : 1440 RPM

Pole : 4 Pole

Standard : IS12615:2018

IP Rating : IP55

Efficiency (%) : IE2

Duty Cycle : S1

Explore other Variants (8)

Ships within 30 days

IMPEL 3 Phase 4 Pole 1440 RPM Foot Mounted IE2 AC Induction Motor (Power 0.5 to 10 HP)

By IMPEL

₹4,719 - ₹36,579

You save ₹18,287!

52.54% OFF

The IMPEL 3 Phase 4 Pole 1440 RPM Foot Mounted IE2 AC Induction Motor is a three-phase general purpose motor designed for industrial equipment requiring a foot mounting arrangement and IE2 efficiency class. Its 4-pole configuration is rated for 1440 RPM, providing clearly defined operating characteristics for compatible machinery. The foot-mounted structure allows the motor to be secured on suitable bases, frames, or mounting platforms according to the equipment layout. With its AC induction motor design, it is applicable to industrial drive assemblies where the specified mounting style, speed, and efficiency class need to match the system requirements. The three-phase configuration further aligns it with machinery designed for industrial electrical applications.The IMPEL 3 Phase 4 Pole 1440 RPM Foot Mounted IE2 AC Induction Motor brings together a conventional foot installation format and IE2 efficiency classification for a range of compatible mechanical systems. It can be used in applications such as pumps, conveyors, fans, compressors, machine tools, and material handling equipment when the motor specifications correspond to the application. The 1440 RPM speed and 4-pole design provide useful selection parameters, while the foot mounting supports straightforward integration with suitable equipment bases. This IMPEL motor is intended for setups that require a three-phase AC induction motor with defined speed, mounting, and IE2 efficiency characteristics.

Series : Casting

Insulation Class : F

Frequency : 50Hz ( ± 5% )

Mounting Type : Foot Mounted

Rated Voltage : 415V (± 10% )

Phase : 3 Phase

Type of Product : AC Induction Motor

Speed : 1440 RPM

Pole : 4 Pole

Standard : IS12615:2018

IP Rating : IP55

Efficiency (%) : IE2

Duty Cycle : S1

Explore other Variants (7)

Ships within 30 days

IMPEL 3 Phase 2 Pole 2880 RPM Flange Mounted IE2 AC Induction Motor (Power 0.5 to 10 HP)

By IMPEL

₹5,309 - ₹36,579

You save ₹17,507!

51.45% OFF

The IMPEL 3 Phase 2 Pole 2880 RPM Flange Mounted IE2 AC Induction Motor is a three-phase general purpose motor configured for industrial applications requiring a higher rotational speed and flange mounting arrangement. Its 2-pole design is rated at 2880 RPM, providing a distinct operating profile for machinery built around faster motor rotation. The flange-mounted construction allows integration with compatible equipment where this mechanical interface is specified. With an IE2 efficiency classification, the motor offers a defined efficiency category for equipment selection and system planning. Its AC induction configuration and three-phase electrical design make it suitable for industrial machinery requiring these particular motor characteristics.The IMPEL 3 Phase 2 Pole 2880 RPM Flange Mounted IE2 AC Induction Motor is applicable to compatible equipment such as fans, pumps, compressors, blowers, and other machinery designed for its speed and mounting requirements. The 2880 RPM rating and 2-pole configuration provide clear parameters when matching the motor with driven systems. Its flange format supports installations where the motor interfaces directly with appropriately designed assemblies, while the three-phase arrangement corresponds to suitable industrial electrical supplies. This IMPEL motor combines a high-speed 2-pole configuration, flange mounting, and IE2 efficiency class for general-purpose industrial applications requiring these specified features.

Series : Casting

Insulation Class : F

Frequency : 50Hz ( ± 5% )

Mounting Type : Flange Mounted

Rated Voltage : 415V (± 10% )

Phase : 3 Phase

Type of Product : AC Induction Motor

Speed : 2880 RPM

Pole : 2 Pole

Standard : IS12615:2018

IP Rating : IP55

Efficiency (%) : IE2

Duty Cycle : S1

Explore other Variants (8)

Ships within 30 days

IMPEL 3 Phase 6 Pole 960 RPM Foot Mounted IE3 AC Induction Motor (Power 0.5 to 10 HP)

By IMPEL

₹7,669 - ₹63,719

You save ₹29,404!

48.94% OFF

The IMPEL 3 Phase 6 Pole 960 RPM Foot Mounted IE3 AC Induction Motor combines a 6-pole configuration with a 960 RPM rated speed for three-phase general-purpose machinery. Its foot-mounted format is suited to equipment layouts where the motor is secured through a base and aligned with the driven mechanism. The IE3 efficiency classification forms an important part of its specification, identifying its position within a higher efficiency class of induction motors. With an AC induction operating principle, this IMPEL motor is defined by a straightforward combination of electrical configuration, speed, pole count and mounting style for equipment selection.Designed around a conventional foot installation, the IMPEL 3 Phase 6 Pole 960 RPM Foot Mounted IE3 AC Induction Motor can be matched with compatible industrial equipment that requires a 960 RPM motor in a base-supported arrangement. The 6-pole construction establishes its operating-speed characteristic, while three-phase input suits machinery designed for three-phase motor systems. Its IE3 classification adds a distinct efficiency specification for comparison during motor selection. The foot-mounted structure also provides a familiar mechanical interface for applications where mounting position and shaft alignment are defined by the equipment design.

Series : Casting

Insulation Class : F

Frequency : 50Hz ( ± 5% )

Mounting Type : Foot Mounted

Rated Voltage : 415V (± 10% )

Phase : 3 Phase

Type of Product : AC Induction Motor

Speed : 960 RPM

Pole : 6 Pole

Standard : IS12615:2018

IP Rating : IP55

Efficiency (%) : IE3

Duty Cycle : S1

Explore other Variants (8)

Ships within 30 days

IMPEL 3 Phase 2 Pole 2880 RPM Foot Mounted IE2 AC Induction Motor (Power 0.5 to 10 HP)

By IMPEL

₹5,191 - ₹35,399

You save ₹16,516!

50% OFF

The IMPEL 3 Phase 2 Pole 2880 RPM Foot Mounted IE2 AC Induction Motor is a three-phase general purpose motor designed for industrial systems that specify a foot mounting arrangement, 2-pole configuration, and IE2 efficiency class. With a rated speed of 2880 RPM, it is suited to machinery requiring a faster rotational motor profile. The foot-mounted construction provides a conventional installation format for securing the motor to compatible foundations, base frames, or machine structures. Its AC induction design is intended for equipment operating with suitable three-phase electrical supplies. The combination of speed, mounting style, pole configuration, and efficiency class gives clear specifications for matching the motor to compatible industrial equipment.The IMPEL 3 Phase 2 Pole 2880 RPM Foot Mounted IE2 AC Induction Motor can be incorporated into applications such as fans, pumps, blowers, compressors, and other machinery designed around its operating characteristics. The 2-pole arrangement corresponds to the specified 2880 RPM speed, while the foot mounting supports integration with equipment using this type of mechanical installation. Its IE2 classification identifies the motor's efficiency category for relevant system requirements. The three-phase configuration further defines its electrical application, making this IMPEL motor suitable for general-purpose industrial setups where a foot-mounted, high-speed AC induction motor with the specified IE2 class is required.

Series : Casting

Insulation Class : F

Frequency : 50Hz ( ± 5% )

Mounting Type : Foot Mounted

Rated Voltage : 415V (± 10% )

Phase : 3 Phase

Type of Product : AC Induction Motor

Speed : 2880 RPM

Pole : 2 Pole

Standard : IS12615:2018

IP Rating : IP55

Efficiency (%) : IE2

Duty Cycle : S1

Explore other Variants (8)

Ships within 30 days

IMPEL 3 Phase 4 Pole 1440 RPM Flange Mounted IE3 AC Induction Motor (Power 0.5 to 10 HP)

By IMPEL

₹5,309 - ₹41,299

You save ₹19,839!

51.24% OFF

The IMPEL 3 Phase 4 Pole 1440 RPM Flange Mounted IE3 AC Induction Motor is engineered for industrial drive arrangements where a three-phase motor with IE3 efficiency classification and flange mounting is required. Its 4-pole configuration provides a rated speed of 1440 RPM, offering defined operating characteristics for compatible machinery. The flange-mounted construction facilitates connection with equipment designed around this mounting interface, making it suitable for installations where motor positioning and shaft alignment are important considerations. As part of the Three Phase General Purpose Motor category, this IMPEL unit is applicable to machinery requiring a specified AC induction motor configuration for regular industrial operation.The IMPEL 3 Phase 4 Pole 1440 RPM Flange Mounted IE3 AC Induction Motor combines its 1440 RPM operating speed with an IE3 efficiency class for applications where these motor specifications form part of the equipment requirement. The three-phase electrical arrangement suits compatible industrial power systems, while the flange format supports integration with matching driven assemblies. It can be used with suitable pumps, fans, conveyors, compressors, machine tools, and other industrial equipment based on their required motor specifications. The 4-pole design, flange mounting, and IE3 classification provide clear parameters for selecting this IMPEL motor for compatible general-purpose applications.

Series : Casting

Insulation Class : F

Frequency : 50Hz ( ± 5% )

Mounting Type : Flange Mounted

Rated Voltage : 415V (± 10% )

Phase : 3 Phase

Type of Product : AC Induction Motor

Speed : 1440 RPM

Pole : 4 Pole

Standard : IS12615:2018

IP Rating : IP55

Efficiency (%) : IE3

Duty Cycle : S1

Explore other Variants (8)

Ships within 30 days

IMPEL 3 Phase 6 Pole 960 RPM Flange Mounted AC Induction Motor with DC Brake (Power 0.5 to 10 HP)

By IMPEL

₹20,059 - ₹1,08,559

You save ₹62,814!

53.64% OFF

The IMPEL 3 Phase 6 Pole 960 RPM Flange Mounted AC Induction Motor with DC Brake is designed for industrial equipment requiring a three-phase motor with a defined 6-pole configuration, 960 RPM operating speed, and flange mounting arrangement. The six-pole design provides a lower rotational speed profile suited to machinery built around this operating characteristic. Its flange-mounted construction offers a dedicated mechanical interface for compatible assemblies, while the AC induction format corresponds to suitable industrial electrical systems. The integrated DC brake forms part of the motor configuration, adding a braking function to applications where controlled stopping is required. This combination makes the motor suitable for general-purpose industrial equipment with matching electrical, mechanical, and speed specifications.The IMPEL 3 Phase 6 Pole 960 RPM Flange Mounted AC Induction Motor with DC Brake can be incorporated into compatible conveyors, pumps, processing equipment, machine tools, and other industrial systems requiring its specified configuration. Its 960 RPM rating and 6-pole arrangement establish the motor's rotational characteristics, while the flange format supports installation on machinery designed for this mounting interface. The DC brake provides an integrated stopping function for compatible applications, complementing the motor's drive operation. With its three-phase electrical arrangement and flange-mounted design, this IMPEL motor provides defined specifications for equipment where controlled rotation and braking functionality are required.

Series : Casting

Insulation Class : F

Frequency : 50Hz ( ± 5% )

Mounting Type : Flange Mounted

Rated Voltage : 415V (± 10% )

Phase : 3 Phase

Type of Product : AC Induction Motor

Speed : 960 RPM

Pole : 6 Pole

Standard : IS12615:2018

IP Rating : IP55

Duty Cycle : S1/ S4 Compitable

Explore other Variants (8)

Ships within 30 days

IMPEL 3 Phase 6 Pole 960 RPM Foot Mounted AC Induction Motor with DC Brake (Power 0.5 to 10 HP)

By IMPEL

₹20,059 - ₹1,02,659

You save ₹60,582!

53.29% OFF

The IMPEL 3 Phase 6 Pole 960 RPM Foot Mounted AC Induction Motor with DC Brake is configured for industrial machinery that requires a three-phase motor with a 6-pole design, 960 RPM speed, and foot-based installation. The six-pole arrangement establishes its rotational profile for equipment designed around this speed range, while the foot-mounted construction allows placement on compatible machine bases, frames, or foundations. Its AC induction configuration corresponds to suitable three-phase industrial power systems, and the integrated DC brake adds a dedicated stopping function to the motor assembly. As a Three Phase General Purpose Motor, it combines defined electrical, mechanical, speed, and braking characteristics within one configuration for compatible industrial equipment.The IMPEL 3 Phase 6 Pole 960 RPM Foot Mounted AC Induction Motor with DC Brake is suited to compatible conveyors, pumps, processing machinery, machine tools, material handling systems, and other equipment requiring its specified operating parameters. The 960 RPM rating provides a clear reference for machinery matching, while the 6-pole construction defines the motor's rotational arrangement. Its foot mounting supports installation where the motor is secured to a suitable horizontal base, and the DC brake provides an integrated braking function for compatible applications. The three-phase AC induction format completes its configuration for general-purpose industrial systems requiring controlled rotation and motor braking.

Series : Casting

Insulation Class : F

Frequency : 50Hz ( ± 5% )

Mounting Type : Foot Mounted

Rated Voltage : 415V (± 10% )

Phase : 3 Phase

Type of Product : AC Induction Motor

Speed : 960 RPM

Pole : 6 Pole

Standard : IS12615:2018

IP Rating : IP55

Duty Cycle : S1/ S4 Compitable

Explore other Variants (8)

Ships within 30 days

IMPEL 3 Phase 2 Pole 2880 RPM Flange Mounted IE3 AC Induction Motor (Power 0.5 to 10 HP)

By IMPEL

₹5,663 - ₹40,119

You save ₹19,049!

51.84% OFF

The IMPEL 3 Phase 2 Pole 2880 RPM Flange Mounted IE3 AC Induction Motor is configured for industrial drive equipment where high rotational speed, flange mounting, and IE3 efficiency classification are specified. Its 2-pole construction corresponds to a rated speed of 2880 RPM, making its operating profile suitable for compatible machinery designed around faster motor rotation. The flange-mounted format provides a defined mechanical interface for equipment built to accommodate this type of motor connection. As a Three Phase General Purpose Motor, it features an AC induction design intended for systems using appropriate three-phase electrical power. Its combination of pole configuration, speed, mounting style, and efficiency class provides specific parameters for equipment matching.The IMPEL 3 Phase 2 Pole 2880 RPM Flange Mounted IE3 AC Induction Motor can be integrated into compatible applications such as fans, blowers, pumps, compressors, and other industrial machinery requiring its specified characteristics. The 2880 RPM rating establishes its operating speed, while the 2-pole arrangement corresponds to the motor configuration. Its flange construction is suited to driven assemblies designed for this mounting interface, helping align the motor with the mechanical arrangement of compatible equipment. The IE3 classification identifies its efficiency category, while the three-phase configuration defines its electrical format. This IMPEL motor is intended for general-purpose industrial setups requiring these specific motor specifications.

Series : Casting

Insulation Class : F

Frequency : 50Hz ( ± 5% )

Mounting Type : Flange Mounted

Rated Voltage : 415V (± 10% )

Phase : 3 Phase

Type of Product : AC Induction Motor

Speed : 2880 RPM

Pole : 2 Pole

Standard : IS12615:2018

IP Rating : IP55

Efficiency (%) : IE3

Duty Cycle : S1

Explore other Variants (8)

Ships within 30 days

IMPEL 3 Phase 4 Pole 1440 RPM Flange Mounted AC Induction Motor with DC Brake (Power 0.5 to 10 HP)

By IMPEL

₹12,979 - ₹81,419

You save ₹35,880!

47.96% OFF

The IMPEL 3 Phase 4 Pole 1440 RPM Flange Mounted AC Induction Motor with DC Brake is a purpose-built drive solution for industrial equipment requiring a three-phase motor with a flange mounting arrangement and integrated braking function. Designed around a 4-pole configuration, it operates at a rated speed of 1440 RPM, making it suitable for machinery where controlled rotational movement is required. The AC induction motor construction supports use in general-purpose industrial applications, while the flange-mounted design provides a practical interface for compatible driven assemblies. Its three-phase electrical configuration makes it applicable to equipment designed for industrial power systems.The IMPEL 3 Phase 4 Pole 1440 RPM Flange Mounted AC Induction Motor with DC Brake combines motor operation with DC braking in a single unit, helping provide a defined stopping mechanism for compatible machinery. The flange mounting format is useful where direct alignment with the driven machine is part of the installation arrangement. With its 4-pole design and 1440 RPM operating speed, this IMPEL motor fits applications that specify these motor characteristics. It can be considered for conveyors, machine tools, processing equipment, pumps, and other compatible industrial machinery where a three-phase general purpose motor with braking functionality is required.

Series : Casting

Insulation Class : F

Frequency : 50Hz ( ± 5% )

Mounting Type : Flange Mounted

Rated Voltage : 415V (± 10% )

Phase : 3 Phase

Type of Product : AC Induction Motor

Speed : 1440 RPM

Pole : 4 Pole

Standard : IS12615:2018

IP Rating : IP55

Duty Cycle : S1/ S4 Compitable

Explore other Variants (8)

Ships within 30 days

IMPEL 3 Phase 4 Pole 1440 RPM Foot Mounted AC Induction Motor with DC Brake (Power 0.5 to 10 HP)

By IMPEL

₹12,979 - ₹79,059

You save ₹34,881!

48.02% OFF

The IMPEL 3 Phase 4 Pole 1440 RPM Foot Mounted AC Induction Motor with DC Brake is designed for industrial machinery that requires a three-phase motor with a conventional foot mounting arrangement and integrated braking. Featuring a 4-pole configuration and 1440 RPM operating speed, it is suited to equipment built around these specific motor parameters. The foot-mounted construction allows the motor to be positioned on a compatible base or mounting platform, supporting installation across a range of general-purpose industrial setups. Its AC induction motor design makes it appropriate for machinery where dependable rotational drive and defined motor specifications are required.The IMPEL 3 Phase 4 Pole 1440 RPM Foot Mounted AC Induction Motor with DC Brake incorporates a DC brake to provide a controlled stopping function for compatible applications. The foot mounting format offers a familiar arrangement for machinery frames, fabricated bases, and other suitable mounting structures. Its three-phase configuration, 4-pole design, and 1440 RPM speed make this IMPEL motor relevant for conveyors, pumps, machine tools, compressors, material handling systems, and other industrial equipment that matches these requirements. The combination of induction motor operation and braking functionality makes it a practical choice for applications requiring both rotary motion and stopping control.

Series : Casting

Insulation Class : F

Frequency : 50Hz ( ± 5% )

Mounting Type : Foot Mounted

Rated Voltage : 415V (± 10% )

Phase : 3 Phase

Type of Product : AC Induction Motor

Speed : 1440 RPM

Pole : 4 Pole

Standard : IS12615:2018

IP Rating : IP55

Duty Cycle : S1/ S4 Compitable

Explore other Variants (8)

Ships within 30 days

IMPEL 3 Phase 6 Pole 960 RPM Flange Mounted IE3 AC Induction Motor (Power 0.5 to 10 HP)

By IMPEL

₹7,669 - ₹66,079

You save ₹32,387!

52.33% OFF

The IMPEL 3 Phase 6 Pole 960 RPM Flange Mounted IE3 AC Induction Motor is a three-phase general purpose motor configured for machinery requiring a 960 RPM operating speed and flange-based installation. Its 6-pole design establishes a defined rotational profile, while the flange mounting arrangement supports integration with equipment designed for this type of motor interface. The IE3 efficiency class identifies the motor as belonging to a higher efficiency category than IE2, making the specification relevant for applications where motor efficiency is an important selection parameter. Its AC induction construction provides a familiar format for industrial electrical drive systems.Featuring a combination of three-phase operation, 6-pole construction and 960 RPM speed, the IMPEL 3 Phase 6 Pole 960 RPM Flange Mounted IE3 AC Induction Motor is intended for compatible general-purpose machinery and process equipment. The flange-mounted format is particularly suited to installations where the motor is positioned through a matching flange interface rather than a base-foot arrangement. Its IE3 classification further defines the motor's electrical efficiency category. Key specifications such as mounting style, pole count, operating speed and efficiency class provide useful identification points when selecting this IMPEL motor for an appropriately matched industrial application.

Series : Casting

Insulation Class : F

Frequency : 50Hz ( ± 5% )

Mounting Type : Flange Mounted

Rated Voltage : 415V (± 10% )

Phase : 3 Phase

Type of Product : AC Induction Motor

Speed : 960 RPM

Pole : 6 Pole

Standard : IS12615:2018

IP Rating : IP55

Efficiency (%) : IE3

Duty Cycle : S1

Explore other Variants (8)

Ships within 60 days

IMPEL 3 Phase 15 HP 6 Pole Foot Mounted AC Induction Motor with DC Brake

By IMPEL

₹1,17,999   ₹1,91,110

You save ₹73,111!

38.26% OFF

IMPEL 3 Phase 15 HP 6 Pole Foot Mounted Industrial Motor The phase Horizontal Induction Motor is one of The Most Widely Used Types of Electric Motors. These Motors Utilize A Phenomenon Called Electromagnetic Induction, In Which A Current Is Passed Through A Coil To Create A Magnetic Field And Induce Motion. The resultant motion causes the motor's Shaft To Rotate, Thus Producing Mechanical Energy. Induction Motors Are Used In A Variety of Applications, From Fans And Air Conditioners To Power Tools And Vacuum Cleaners.
They Require An Alternating Current Supply. These Supplies Consist of Two Parts: An Alternating Current (AC) Supply And A Rectifier Circuit That Converts It Into Direct Current (DC). Induction Motors Are Classified According To The Type of Supply.
One Type of Induction Motor Is Known As An Ac Series or Shaded Pole Motor. This Type Utilizes A Three-Phase Supply In Which The Phases Are Out of Phase With Each Other By 120 Degrees. The Electromagnetic Stator Contains Electromagnets With Coils Wrapped Around Steel Laminations In The Rotor Core. A Squirrel Cage Is Located At The End of The Stator Housing, Which Is Usually Made Out of Copper or Aluminum Pumps and Compressors: Motors drive pumps for water supply, wastewater treatment, and chemical processing. Manufacturing, petrochemical, and refrigeration compressors rely on motors to pressurize gases. Fans and Blowers: Motors power HVAC (Heating, Ventilation, and Air Conditioning) systems for climate control in industrial buildings. Industrial fans and blowers provide ventilation and cooling for equipment and processes. Motors, including servo and stepper motors, are essential in machine tools like lathes, milling machines, and CNC (Computer Numerical Control) machines for precision machining. Industrial Robots: Motors provide motion control for industrial robots used in tasks such as welding, painting, and assembly in manufacturing and automotive industries. Electric Vehicles (EVs): Electric motors are used in electric vehicles (EVs) and hybrid electric vehicles (HEVs) for propulsion Motors are integral to industrial automation systems, providing precise control for positioning and movement in automated production lines and processes Industrial motors in logistics and material handling applications power roller and belt conveyors Conveyor systems transport goods within factories and warehouses Motors drive pumps, compressors, and drilling equipment in oil and gas extraction, refining, and transportation Motors drive equipment in food processing, including mixers, grinders, ovens, and packaging machinery Motors are used in chemical plants for agitators, pumps, and reactors involved in chemical production Motors are crucial in treatment treatment facilities' aeration, mixing, and pumping processes. Textile Industry: Motors power textile machinery such as spinning machines, looms, and dyeing equipment.Paper and Printing

Add to Cart Buy Now

Ships within 60 days

IMPEL 3 Phase 4 Pole 1440 RPM Flange Mounted AC Induction Motor with DC Brake

By IMPEL

₹1,12,099 - ₹1,14,459

You save ₹67,829!

37.7% OFF

The IMPEL 3 Phase 4 Pole 1440 RPM Flange Mounted AC Induction Motor with DC Brake is a three-phase industrial motor designed with a 4-pole configuration and a specified operating speed of 1440 RPM. Its flange-mounted construction provides a defined mechanical interface for equipment designed with a compatible flange arrangement. The AC induction configuration establishes its motor type, while the integrated DC brake adds a dedicated braking function to the overall setup. With its combination of three-phase operation, four-pole design, 1440 RPM speed, flange mounting, and DC braking, this IMPEL motor is suited to industrial machinery where these specific technical characteristics are required. The mounting format is an important consideration when matching the motor with the mechanical structure of the driven equipment.The IMPEL 3 Phase 4 Pole 1440 RPM Flange Mounted AC Induction Motor with DC Brake can be incorporated into compatible rotating machinery requiring a flange-mounted motor with an integrated braking arrangement. Its four-pole configuration corresponds to the stated 1440 RPM speed, while the three-phase format is intended for suitable industrial electrical systems. Depending on equipment specifications, it can be considered for pumps, conveyors, machine tools, fans, processing equipment, and other applications requiring matching motor parameters. The flange interface supports installation on machinery designed for this mounting style, while the DC brake forms part of the motor's defined configuration. This model is categorized under Three Phase Industrial Motor and provides a specific combination of speed, pole count, mounting arrangement, and braking functionality.

Insulation Class : F

Mounting Type : Flange Mounted

Rated Voltage : 415V (± 10% )

Frequency : 50Hz ( ± 5% )

Phase : 3 Phase

Speed : 1440 RPM

Type of Product : AC Induction Motor

Pole : 4

Standard : IS12615:2018

Series : Casting

Frame : 160M

IP Rating : IP55

Duty Cycle : S1/ S4 Compitable

Explore other Variants (2)

Ships within 60 days

IMPEL 3 Phase 4 Pole 1440 RPM Foot Mounted AC Induction Motor with DC Brake

By IMPEL

₹1,06,199 - ₹1,09,739

You save ₹65,161!

38.03% OFF

The IMPEL 3 Phase 4 Pole 1440 RPM Foot Mounted AC Induction Motor with DC Brake is a three-phase industrial motor configured with four poles and a stated operating speed of 1440 RPM. Its foot-mounted construction provides a suitable mechanical arrangement for equipment designed with a compatible base, while the AC induction design establishes its primary motor type. The integrated DC brake adds a braking function to the motor configuration, making it relevant for machinery where controlled stopping is part of the operating setup. With its combination of three-phase electrical operation, 4-pole design, 1440 RPM speed, foot mounting, and DC braking arrangement, this IMPEL motor has a clearly defined specification for industrial drive applications.The IMPEL 3 Phase 4 Pole 1440 RPM Foot Mounted AC Induction Motor with DC Brake can be incorporated into compatible machinery requiring rotational drive along with a DC braking arrangement. The foot-mounted format supports installation on an appropriate equipment base, while the four-pole configuration corresponds with the specified 1440 RPM speed. Depending on system requirements, the motor can be used with compatible conveyors, machine tools, pumps, fans, processing equipment, and other rotating machinery where the stated specifications match. The DC brake forms an integral part of its configuration, providing a defined braking feature alongside the three-phase AC induction motor design. This makes the IMPEL model a specific option within the Three Phase Industrial Motor category.

Insulation Class : F

Mounting Type : Foot Mounted

Rated Voltage : 415V (± 10% )

Frequency : 50Hz ( ± 5% )

Phase : 3 Phase

Speed : 1440 RPM

Type of Product : AC Induction Motor

Pole : 4

Standard : IS12615:2018

Series : Casting

Frame : 160M

IP Rating : IP55

Duty Cycle : S1/ S4 Compitable

Explore other Variants (2)

Ships within 60 days

IMPEL 3 Phase 6 Pole 960 RPM Flange Mounted IE3 AC Induction Motor

By IMPEL

₹82,599 - ₹1,12,099

You save ₹68,810!

38.04% OFF

The IMPEL 3 Phase 6 Pole 960 RPM Flange Mounted IE3 AC Induction Motor is specified for industrial drive arrangements requiring three-phase operation, six poles, and a rotational speed of 960 RPM. Its flange-mounted construction provides a dedicated connection format for machinery designed with a compatible flange interface. The AC induction configuration defines its motor type, while the IE3 rating identifies its specified efficiency class. Within the Three Phase Industrial Motor category, this IMPEL model combines a lower-speed operating profile with a flange-based mounting arrangement, making its mechanical interface an important consideration during equipment selection. The six-pole design further establishes its stated speed characteristics for systems requiring this particular motor configuration.The IMPEL 3 Phase 6 Pole 960 RPM Flange Mounted IE3 AC Induction Motor can be incorporated into compatible machinery where a 960 RPM motor with flange mounting is required. Its three-phase electrical format is suited to corresponding industrial power systems, while the six-pole configuration defines its operating profile. Depending on equipment requirements, it can be considered for applications such as pumps, fans, compressors, conveyors, processing machinery, and other rotating systems designed for matching specifications. The flange arrangement allows installation where the equipment provides a suitable mounting interface. With its IE3 classification, six-pole construction, 960 RPM speed, and AC induction design, this IMPEL motor offers a clearly defined specification for industrial equipment integration.

Insulation Class : F

Mounting Type : Flange Mounted

Rated Voltage : 415V (± 10% )

Frequency : 50Hz ( ± 5% )

Phase : 3 Phase

Speed : 960

Type of Product : AC Induction Motor

Pole : 6

Standard : IS12615:2018

Series : Casting

IP Rating : IP55

Efficiency (%) : IE3

Duty Cycle : S1

Explore other Variants (2)

Ships within 60 days

IMPEL 3 Phase 6 Pole 960 RPM Foot Mounted IE3 AC Induction Motor

By IMPEL

₹77,879 - ₹1,07,379

You save ₹64,915!

37.68% OFF

The IMPEL 3 Phase 6 Pole 960 RPM Foot Mounted IE3 AC Induction Motor is a three-phase industrial motor built around a 6-pole configuration and a specified speed of 960 RPM. Its foot-mounted arrangement provides a practical mechanical format for machinery designed with a compatible base and alignment setup. The AC induction design defines its electrical operating principle, while the IE3 classification identifies its designated efficiency level. This IMPEL motor brings together a relatively lower-speed operating profile with a six-pole configuration, making these specifications important when selecting a motor for equipment with corresponding drive requirements. The combination of mounting style, speed, pole count, and efficiency class gives the product a clearly defined industrial configuration.The IMPEL 3 Phase 6 Pole 960 RPM Foot Mounted IE3 AC Induction Motor can be integrated into compatible equipment requiring a foot-mounted three-phase motor operating at 960 RPM. Its six-pole arrangement establishes the stated speed characteristic, while the three-phase format corresponds to suitable industrial electrical systems. Depending on application specifications, it may be used with pumps, fans, conveyors, compressors, processing machinery, and other rotating equipment designed for compatible motor parameters. The foot mounting supports installation on an appropriate equipment base, while the IE3 classification forms part of its technical specification. Together, these characteristics make this IMPEL motor a defined option for industrial machinery requiring a 960 RPM, six-pole AC induction configuration.

Insulation Class : F

Mounting Type : Foot Mounted

Rated Voltage : 415V (± 10% )

Frequency : 50Hz ( ± 5% )

Phase : 3 Phase

Speed : 960

Type of Product : AC Induction Motor

Pole : 6

Standard : IS12615:2018

Series : Casting

IP Rating : IP55

Efficiency (%) : IE3

Duty Cycle : S1

Explore other Variants (2)

Ships within 60 days

IMPEL 3 Phase 4 Pole 1440 RPM Flange Mounted IE3 AC Induction Motor

By IMPEL

₹68,439 - ₹83,779

You save ₹50,807!

37.75% OFF

The IMPEL 3 Phase 4 Pole 1440 RPM Flange Mounted IE3 AC Induction Motor is designed for industrial machinery requiring a three-phase motor with a 4-pole configuration and a specified speed of 1440 RPM. Its flange-mounted construction provides a dedicated mechanical interface for equipment designed around this mounting arrangement. The AC induction format establishes its operating principle, while the IE3 classification denotes its specified efficiency level. As part of the Three Phase Industrial Motor category, this IMPEL motor brings together a defined speed, pole count, mounting style, and electrical configuration for machinery integration. The flange format can be particularly relevant where the motor needs to connect with equipment through a compatible mounting face.The IMPEL 3 Phase 4 Pole 1440 RPM Flange Mounted IE3 AC Induction Motor can be used with compatible industrial systems that call for a 1440 RPM flange-mounted motor. Its four-pole arrangement provides the stated rotational profile, while three-phase construction corresponds to suitable industrial electrical systems. Depending on equipment specifications, it may be incorporated into pumps, fans, compressors, conveyors, processing machinery, and other rotating applications. The flange mounting allows integration with machinery designed for this interface, while the IE3 efficiency classification forms part of its technical specification. Together, the 4-pole design, 1440 RPM speed, flange mounting, and IE3 classification define this IMPEL motor for industrial equipment selection.

Insulation Class : F

Mounting Type : Flange Mounted

Rated Voltage : 415V (± 10% )

Frequency : 50Hz ( ± 5% )

Phase : 3 Phase

Speed : 1440 RPM

Type of Product : AC Induction Motor

Pole : 4

Standard : IS12615:2018

Series : Casting

IP Rating : IP55

Efficiency (%) : IE3

Duty Cycle : S1

Explore other Variants (2)

Ships within 60 days

IMPEL 3 Phase 4 Pole 1440 RPM Foot Mounted IE3 AC Induction Motor

By IMPEL

₹64,899 - ₹79,059

You save ₹49,119!

38.32% OFF

The IMPEL 3 Phase 4 Pole 1440 RPM Foot Mounted IE3 AC Induction Motor is a three-phase industrial motor featuring a 4-pole arrangement and a specified speed of 1440 RPM. Its foot-mounted construction provides a conventional installation format for machinery equipped with a compatible motor base. The AC induction configuration defines its operating type, while the IE3 efficiency classification identifies the motor's designated efficiency level. This IMPEL motor is suited to industrial drive systems where the combination of three-phase operation, moderate rotational speed, pole count, and base mounting needs to align with the equipment design. The clearly defined configuration makes it relevant for selecting a motor according to mechanical mounting and electrical operating requirements.The IMPEL 3 Phase 4 Pole 1440 RPM Foot Mounted IE3 AC Induction Motor can be incorporated into compatible industrial equipment requiring a foot-mounted motor with a 1440 RPM specification. Its 4-pole construction establishes the stated speed profile, while three-phase operation corresponds to the intended electrical arrangement. Applications may include suitable pumps, fans, conveyors, compressors, machine systems, and other rotating equipment, depending on the required operating parameters. The foot-mounted format allows installation on machinery bases designed for this mounting method. With its IE3 classification, 4-pole configuration, 1440 RPM speed, and AC induction design, this IMPEL motor presents a defined specification for industrial motor selection and equipment integration.

Insulation Class : F

Mounting Type : Foot Mounted

Rated Voltage : 415V (± 10% )

Frequency : 50Hz ( ± 5% )

Phase : 3 Phase

Speed : 1440 RPM

Type of Product : AC Induction Motor

Pole : 4

Standard : IS12615:2018

Series : Casting

IP Rating : IP55

Efficiency (%) : IE3

Duty Cycle : S1

Explore other Variants (2)

Ships within 60 days

IMPEL 3 Phase 2 Pole 2880 RPM Flange Mounted IE3 AC Induction Motor

By IMPEL

₹68,439 - ₹79,059

You save ₹48,800!

38.17% OFF

The IMPEL 3 Phase 2 Pole 2880 RPM Flange Mounted IE3 AC Induction Motor is a three-phase industrial motor specified with a 2-pole configuration and 2880 RPM operating speed. Its flange-mounted construction is intended for machinery where the motor connects through a compatible flange interface, making the mounting arrangement a key part of equipment integration. The AC induction configuration provides a conventional motor type for electrically driven rotating equipment, while the IE3 classification identifies its specified efficiency level. The combination of high rotational speed and flange mounting gives this IMPEL motor a distinct configuration for industrial systems where available installation space, shaft alignment, and motor specifications need to correspond with the driven equipment.The IMPEL 3 Phase 2 Pole 2880 RPM Flange Mounted IE3 AC Induction Motor is applicable to compatible machinery designed around a flange-based motor installation and a 2880 RPM drive requirement. Its two-pole construction establishes the stated speed profile, while three-phase operation defines the electrical arrangement. Depending on equipment specifications, this motor can be integrated into applications such as pumps, fans, blowers, compressors, machine tools, and other rotating machinery. The flange interface provides a defined mounting method for equipment designed around this configuration. Its IE3 efficiency classification, 2-pole design, and 2880 RPM specification create a focused product profile within the Three Phase Industrial Motor category.

Insulation Class : F

Mounting Type : Flange Mounted

Rated Voltage : 415V (± 10% )

Frequency : 50Hz ( ± 5% )

Phase : 3 Phase

Speed : 2880 RPM

Type of Product : AC Induction Motor

Pole : 2

Standard : IS12615:2018

Series : Casting

Frame : 160M

IP Rating : IP55

Efficiency (%) : IE3

Duty Cycle : S1

Explore other Variants (2)

Ships within 60 days

IMPEL 3 Phase 2 Pole 2880 RPM Foot Mounted IE3 AC Induction Motor

By IMPEL

₹64,899 - ₹75,519

You save ₹46,251!

37.98% OFF

The IMPEL 3 Phase 2 Pole 2880 RPM Foot Mounted IE3 AC Induction Motor is a high-speed three-phase industrial motor featuring a 2-pole configuration and a stated rotational speed of 2880 RPM. Its foot-mounted design is suited to machinery arrangements where the motor is secured to a compatible base, providing a defined mechanical mounting format for industrial equipment. The AC induction operating principle makes it a conventional choice for electrically powered rotating systems, while the IE3 classification identifies its efficiency category. With its combination of pole count, speed, mounting style, and efficiency class, this IMPEL motor presents a clearly specified configuration for applications that require a higher-speed industrial drive.The IMPEL 3 Phase 2 Pole 2880 RPM Foot Mounted IE3 AC Induction Motor can be integrated with compatible equipment where a 2880 RPM motor and foot-based installation are required. The 2-pole arrangement corresponds with its stated high-speed operating profile, while three-phase construction defines its electrical configuration. Depending on equipment requirements, its specification may suit applications such as fans, pumps, blowers, compressors, machine tools, and other rotating systems designed for compatible motor parameters. The foot-mounted format allows it to be incorporated into machinery with a suitable base and alignment arrangement. Its IE3 efficiency classification further defines the motor's specification profile within the Three Phase Industrial Motor category.

Insulation Class : F

Mounting Type : Foot Mounted

Rated Voltage : 415V (± 10% )

Frequency : 50Hz ( ± 5% )

Phase : 3 Phase

Speed : 2880 RPM

Type of Product : AC Induction Motor

Pole : 2

Standard : IS12615:2018

Series : Casting

Frame : 160M

IP Rating : IP55

Efficiency (%) : IE3

Duty Cycle : S1

Explore other Variants (2)

Ships within 60 days

IMPEL 3 Phase 15 HP 8 Pole Flange Mounted AC Induction Motor IE2

By IMPEL

₹1,09,739   ₹1,77,177

You save ₹67,438!

38.06% OFF

IMPEL 3 Phase 15 HP 8 Pole Flange Mounted Industrial Motor The phase Horizontal Induction Motor is one of The Most Widely Used Types of Electric Motors. These Motors Utilize A Phenomenon Called Electromagnetic Induction, In Which A Current Is Passed Through A Coil To Create A Magnetic Field And Induce Motion. The resultant motion causes the motor's Shaft To Rotate, Thus Producing Mechanical Energy. Induction Motors Are Used In A Variety of Applications, From Fans And Air Conditioners To Power Tools And Vacuum Cleaners.
They Require An Alternating Current Supply. These Supplies Consist of Two Parts: An Alternating Current (AC) Supply And A Rectifier Circuit That Converts It Into Direct Current (DC). Induction Motors Are Classified According To The Type of Supply.
One Type of Induction Motor Is Known As An Ac Series or Shaded Pole Motor. This Type Utilizes A Three-Phase Supply In Which The Phases Are Out of Phase With Each Other By 120 Degrees. The Electromagnetic Stator Contains Electromagnets With Coils Wrapped Around Steel Laminations In The Rotor Core. A Squirrel Cage Is Located At The End of The Stator Housing, Which Is Usually Made Out of Copper or Aluminum Pumps and Compressors: Motors drive pumps for water supply, wastewater treatment, and chemical processing. Manufacturing, petrochemical, and refrigeration compressors rely on motors to pressurize gases. Fans and Blowers: Motors power HVAC (Heating, Ventilation, and Air Conditioning) systems for climate control in industrial buildings. Industrial fans and blowers provide ventilation and cooling for equipment and processes. Motors, including servo and stepper motors, are essential in machine tools like lathes, milling machines, and CNC (Computer Numerical Control) machines for precision machining. Industrial Robots: Motors provide motion control for industrial robots used in tasks such as welding, painting, and assembly in manufacturing and automotive industries. Electric Vehicles (EVs): Electric motors are used in electric vehicles (EVs) and hybrid electric vehicles (HEVs) for propulsion Motors are integral to industrial automation systems, providing precise control for positioning and movement in automated production lines and processes Industrial motors in logistics and material handling applications power roller and belt conveyors Conveyor systems transport goods within factories and warehouses Motors drive pumps, compressors, and drilling equipment in oil and gas extraction, refining, and transportation Motors drive equipment in food processing, including mixers, grinders, ovens, and packaging machinery Motors are used in chemical plants for agitators, pumps, and reactors involved in chemical production Motors are crucial in treatment treatment facilities' aeration, mixing, and pumping processes. Textile Industry: Motors power textile machinery such as spinning machines, looms, and dyeing equipment.Paper and Printing

Add to Cart Buy Now

Ships within 60 days

IMPEL 3 Phase 15 HP 8 Pole Foot Mounted AC Induction Motor IE2

By IMPEL

₹1,05,019   ₹1,68,740

You save ₹63,721!

37.76% OFF

IMPEL 3 Phase 15 HP 8 Pole Foot Mounted Industrial Motor The phase Horizontal Induction Motor is one of The Most Widely Used Types of Electric Motors. These Motors Utilize A Phenomenon Called Electromagnetic Induction, In Which A Current Is Passed Through A Coil To Create A Magnetic Field And Induce Motion. The resultant motion causes the motor's Shaft To Rotate, Thus Producing Mechanical Energy. Induction Motors Are Used In A Variety of Applications, From Fans And Air Conditioners To Power Tools And Vacuum Cleaners.
They Require An Alternating Current Supply. These Supplies Consist of Two Parts: An Alternating Current (AC) Supply And A Rectifier Circuit That Converts It Into Direct Current (DC). Induction Motors Are Classified According To The Type of Supply.
One Type of Induction Motor Is Known As An Ac Series or Shaded Pole Motor. This Type Utilizes A Three-Phase Supply In Which The Phases Are Out of Phase With Each Other By 120 Degrees. The Electromagnetic Stator Contains Electromagnets With Coils Wrapped Around Steel Laminations In The Rotor Core. A Squirrel Cage Is Located At The End of The Stator Housing, Which Is Usually Made Out of Copper or Aluminum Pumps and Compressors: Motors drive pumps for water supply, wastewater treatment, and chemical processing. Manufacturing, petrochemical, and refrigeration compressors rely on motors to pressurize gases. Fans and Blowers: Motors power HVAC (Heating, Ventilation, and Air Conditioning) systems for climate control in industrial buildings. Industrial fans and blowers provide ventilation and cooling for equipment and processes. Motors, including servo and stepper motors, are essential in machine tools like lathes, milling machines, and CNC (Computer Numerical Control) machines for precision machining. Industrial Robots: Motors provide motion control for industrial robots used in tasks such as welding, painting, and assembly in manufacturing and automotive industries. Electric Vehicles (EVs): Electric motors are used in electric vehicles (EVs) and hybrid electric vehicles (HEVs) for propulsion Motors are integral to industrial automation systems, providing precise control for positioning and movement in automated production lines and processes Industrial motors in logistics and material handling applications power roller and belt conveyors Conveyor systems transport goods within factories and warehouses Motors drive pumps, compressors, and drilling equipment in oil and gas extraction, refining, and transportation Motors drive equipment in food processing, including mixers, grinders, ovens, and packaging machinery Motors are used in chemical plants for agitators, pumps, and reactors involved in chemical production Motors are crucial in treatment treatment facilities' aeration, mixing, and pumping processes. Textile Industry: Motors power textile machinery such as spinning machines, looms, and dyeing equipment.Paper and Printing

Add to Cart Buy Now

Ships within 60 days

IMPEL 3 Phase 6 Pole 960 RPM Flange Mounted IE2 AC Induction Motor (Power 12.5 to 50 HP)

By IMPEL

₹74,339 - ₹3,18,599

You save ₹145,500!

31.35% OFF

The IMPEL 3 Phase 6 Pole 960 RPM Flange Mounted IE2 AC Induction Motor is an industrial motor designed around a six-pole, three-phase configuration with a stated operating speed of 960 RPM. Its flange-mounted construction provides a different installation arrangement from base-mounted motor designs, making the mounting format an important factor when integrating it with compatible machinery. The AC induction principle establishes its electrical operating type, while the IE2 classification specifies its efficiency category. As an IMPEL product within the Three Phase Industrial Motor range, it combines clearly defined electrical and mechanical characteristics for industrial equipment where the motor interface, speed, and pole configuration need to correspond with the driven system.The IMPEL 3 Phase 6 Pole 960 RPM Flange Mounted IE2 AC Induction Motor is suited to equipment layouts designed for flange-based motor integration and a 960 RPM drive profile. The six-pole configuration provides the stated speed characteristic, while three-phase operation identifies its intended electrical supply arrangement. This motor can be matched with compatible industrial machinery such as pumps, fans, compressors, conveyors, and process equipment according to the application's required specifications. Its flange mounting can support equipment designs where direct mechanical interfacing is required. The combination of six poles, 960 RPM speed, IE2 efficiency classification, and flange mounting gives this IMPEL motor a specific configuration for industrial motor selection and machinery integration.

Insulation Class : F

Mounting Type : Flange Mounted

Rated Voltage : 415V (± 10% )

Frequency : 50Hz ( ± 5% )

Phase : 3 Phase

Speed : 960

Type of Product : AC Induction Motor

Pole : 6

Standard : IS12615:2018

Series : Casting

IP Rating : IP55

Efficiency (%) : IE2

Duty Cycle : S1

Explore other Variants (7)

Ships within 60 days

IMPEL 3 Phase 6 Pole 960 RPM Foot Mounted IE2 AC Induction Motor (Power 12.5 to 50 HP)

By IMPEL

₹70,799 - ₹3,06,799

You save ₹135,200!

30.59% OFF

The IMPEL 3 Phase 6 Pole 960 RPM Foot Mounted IE2 AC Induction Motor is configured for industrial machinery requiring a six-pole, three-phase AC motor with a stated speed of 960 RPM. Designed within the Three Phase Industrial Motor category, this IMPEL motor incorporates a foot-mounted construction for installation on compatible equipment bases. The six-pole arrangement distinguishes its operating profile from higher-speed motor configurations, making the stated 960 RPM specification an important consideration when matching the motor with driven machinery. Its AC induction design provides a conventional electrical motor configuration for industrial drive systems, while the IE2 efficiency class defines its designated efficiency level.The IMPEL 3 Phase 6 Pole 960 RPM Foot Mounted IE2 AC Induction Motor offers a defined combination of mounting format, pole count, speed, and efficiency classification for equipment integration. The foot-mounted design supports applications where the motor is secured to a suitable base and aligned with the connected drive arrangement. Its specifications can be considered for compatible pumps, fans, conveyors, compressors, processing equipment, and other machinery requiring a 960 RPM three-phase motor, subject to system requirements. The combination of six-pole construction, IE2 classification, and foot mounting gives this IMPEL motor a distinct specification profile for industrial motor selection and replacement applications.

Insulation Class : F

Mounting Type : Foot Mounted

Rated Voltage : 415V (± 10% )

Frequency : 50Hz ( ± 5% )

Phase : 3 Phase

Speed : 960

Type of Product : AC Induction Motor

Pole : 6

Standard : IS12615:2018

Series : Casting

IP Rating : IP55

Efficiency (%) : IE2

Duty Cycle : S1

Explore other Variants (7)

Ships within 60 days

IMPEL 3 Phase 4 Pole 1440 RPM Flange Mounted IE2 AC Induction Motor (Power 12.5 to 50 HP)

By IMPEL

₹57,819 - ₹1,88,799

You save ₹114,756!

37.8% OFF

The IMPEL 3 Phase 4 Pole 1440 RPM Flange Mounted IE2 AC Induction Motor is a three-phase industrial motor configured with four poles and a stated rotational speed of 1440 RPM. Its flange-mounted arrangement is intended for equipment where the motor is integrated through a flange connection rather than a conventional foot base. The AC induction design provides the motor with a clearly defined operating configuration for electrically driven industrial machinery. With an IE2 efficiency classification, this IMPEL motor fits applications where motor efficiency class, mounting method, pole configuration, and operating speed are important selection parameters. The flange format also makes the product relevant to machinery layouts that require a compact and direct mounting interface.The IMPEL 3 Phase 4 Pole 1440 RPM Flange Mounted IE2 AC Induction Motor combines a 4-pole electrical configuration with a 1440 RPM speed specification for compatible industrial drive arrangements. Its flange mounting can be matched with equipment designed for this type of motor installation, while the three-phase input makes it applicable to suitable industrial electrical systems. This motor can be used with compatible machinery such as pumps, fans, compressors, gear-driven equipment, and other rotating applications, subject to the required specifications. The IE2 classification, flange-mounted construction, and defined speed provide a focused specification profile for industrial motor selection and equipment integration.

Insulation Class : F

Mounting Type : Flange Mounted

Rated Voltage : 415V (± 10% )

Frequency : 50Hz ( ± 5% )

Phase : 3 Phase

Speed : 1440 RPM

Type of Product : AC Induction Motor

Pole : 4

Standard : IS12615:2018

Series : Casting

IP Rating : IP55

Efficiency (%) : IE2

Duty Cycle : S1

Explore other Variants (7)

Ships within 60 days

IMPEL 3 Phase 4 Pole 1440 RPM Foot Mounted IE2 AC Induction Motor (Power 12.5 to 50 HP)

By IMPEL

₹55,459 - ₹1,88,799

You save ₹100,301!

34.69% OFF

The IMPEL 3 Phase 4 Pole 1440 RPM Foot Mounted IE2 AC Induction Motor is designed for industrial drive systems that require a three-phase motor with a 4-pole configuration and a rated speed of 1440 RPM. As part of the Three Phase Industrial Motor category, this IMPEL motor features a foot-mounted construction that supports conventional base-mounted installation and alignment. Its AC induction operating principle makes it suitable for applications where steady rotary motion is required for electrically driven machinery. The IE2 efficiency class identifies its position within established motor efficiency classifications, making the specification relevant for industrial equipment selection and system planning.The IMPEL 3 Phase 4 Pole 1440 RPM Foot Mounted IE2 AC Induction Motor provides a practical motor configuration for equipment designers, maintenance teams, and industrial users working with compatible three-phase electrical systems. The 4-pole design corresponds with the stated 1440 RPM operating speed, while the foot mounting allows integration with machinery designed for this installation arrangement. Its specification can be considered for industrial equipment such as pumps, fans, conveyors, compressors, and other driven systems, subject to application requirements and matching electrical parameters. The combination of IMPEL branding, IE2 efficiency classification, three-phase operation, and foot-mounted construction gives this motor a clearly defined specification profile for industrial motor selection.

Insulation Class : F

Mounting Type : Foot Mounted

Rated Voltage : 415V (± 10% )

Frequency : 50Hz ( ± 5% )

Phase : 3 Phase

Speed : 1440 RPM

Type of Product : AC Induction Motor

Pole : 4

Standard : IS12615:2018

Series : Casting

IP Rating : IP55

Efficiency (%) : IE2

Duty Cycle : S1

Explore other Variants (7)

Ships within 60 days

IMPEL 3 Phase 2 Pole 2880 RPM Flange Mounted IE2 AC Induction Motor (Power 12.5 to 50 HP)

By IMPEL

₹53,099 - ₹1,88,799

You save ₹102,366!

35.16% OFF

IMPEL 3 Phase 2 Pole 2880 RPM Flange Mounted IE2 AC Induction Motor is a high-speed three phase industrial motor configured for equipment that uses flange-based motor mounting. Its 2-pole design operates at 2880 RPM, making it suitable for machinery where a higher rotational speed is specified. The IE2 efficiency class defines its energy-efficiency category within industrial motor applications. Unlike foot-mounted configurations, the flange mounting arrangement provides a face-mounted mechanical interface for compatible driven equipment. The three phase AC induction design is intended for use with suitable three phase electrical systems and industrial machinery. With its defined speed, mounting style, and efficiency classification, this IMPEL motor is a practical choice for applications requiring a compact and directly aligned motor installation.Designed for industrial drive arrangements, IMPEL 3 Phase 2 Pole 2880 RPM Flange Mounted IE2 AC Induction Motor fits machinery where the mounting interface and rotational characteristics need to match the driven system. The flange format can be integrated with compatible equipment housings, assemblies, and transmission setups. Its 2880 RPM operating speed corresponds to the 2-pole configuration, while the induction motor construction provides a conventional electrical drive format. This three phase industrial motor can be considered for equipment such as pumps, fans, blowers, compressors, and other rotating machinery where a flange-mounted, high-speed motor is specified.

Insulation Class : F

Mounting Type : Flange Mounted

Rated Voltage : 415V (± 10% )

Frequency : 50Hz ( ± 5% )

Phase : 3 Phase

Speed : 2880 RPM

Type of Product : AC Induction Motor

Pole : 2

Standard : IS12615:2018

Series : Casting

IP Rating : IP55

Efficiency (%) : IE2

Duty Cycle : S1

Explore other Variants (7)

Ships within 60 days

IMPEL 3 Phase 2 Pole 2880 RPM Foot Mounted IE2 AC Induction Motor (Power 12.5 to 50 HP)

By IMPEL

₹50,739 - ₹1,76,999

You save ₹100,301!

36.17% OFF

IMPEL 3 Phase 2 Pole 2880 RPM Foot Mounted IE2 AC Induction Motor is a high-speed three phase industrial motor designed for applications requiring consistent rotary motion and a practical mounting arrangement. Operating at 2880 RPM with a 2-pole configuration, it is suited to equipment where elevated motor speed is an important operating requirement. The IE2 efficiency class provides a defined efficiency level for industrial motor applications. Its three phase AC induction design supports integration with compatible industrial electrical systems, while the foot-mounted construction allows the motor to be positioned on suitable machine bases or mounting surfaces. The IMPEL brand brings this motor into a range intended for industrial power transmission and electrically driven machinery.Built around a conventional AC induction motor configuration, IMPEL 3 Phase 2 Pole 2880 RPM Foot Mounted IE2 AC Induction Motor can be used across industrial equipment where a 2-pole, high-speed drive is specified. The foot mounting format offers a straightforward mechanical interface for installation with compatible driven machinery. Its three phase electrical arrangement makes it relevant to industrial setups using three phase power supplies, while the 2880 RPM rated speed identifies its operating class. This motor is suitable for applications such as rotating machinery, process equipment, pumps, fans, and other systems that require an appropriately matched high-speed industrial motor.

Insulation Class : F

Mounting Type : Foot Mounted

Rated Voltage : 415V (± 10% )

Frequency : 50Hz ( ± 5% )

Phase : 3 Phase

Speed : 2880 RPM

Type of Product : AC Induction Motor

Pole : 2

Standard : IS12615:2018

Series : Casting

IP Rating : IP55

Efficiency (%) : IE2

Duty Cycle : S1

Explore other Variants (7)

Ships within 60 days

IMPEL 3 Phase 15 HP 6 Pole Flange Mounted AC Induction Motor with DC Brake

By IMPEL

₹1,23,899   ₹2,00,666

You save ₹76,767!

38.26% OFF

IMPEL 3 Phase 15 HP 6 Pole Flange Mounted Industrial Motor The phase Horizontal Induction Motor is one of The Most Widely Used Types of Electric Motors. These Motors Utilize A Phenomenon Called Electromagnetic Induction, In Which A Current Is Passed Through A Coil To Create A Magnetic Field And Induce Motion. The resultant motion causes the motor's Shaft To Rotate, Thus Producing Mechanical Energy. Induction Motors Are Used In A Variety of Applications, From Fans And Air Conditioners To Power Tools And Vacuum Cleaners.
They Require An Alternating Current Supply. These Supplies Consist of Two Parts: An Alternating Current (AC) Supply And A Rectifier Circuit That Converts It Into Direct Current (DC). Induction Motors Are Classified According To The Type of Supply.
One Type of Induction Motor Is Known As An Ac Series or Shaded Pole Motor. This Type Utilizes A Three-Phase Supply In Which The Phases Are Out of Phase With Each Other By 120 Degrees. The Electromagnetic Stator Contains Electromagnets With Coils Wrapped Around Steel Laminations In The Rotor Core. A Squirrel Cage Is Located At The End of The Stator Housing, Which Is Usually Made Out of Copper or Aluminum Pumps and Compressors: Motors drive pumps for water supply, wastewater treatment, and chemical processing. Manufacturing, petrochemical, and refrigeration compressors rely on motors to pressurize gases. Fans and Blowers: Motors power HVAC (Heating, Ventilation, and Air Conditioning) systems for climate control in industrial buildings. Industrial fans and blowers provide ventilation and cooling for equipment and processes. Motors, including servo and stepper motors, are essential in machine tools like lathes, milling machines, and CNC (Computer Numerical Control) machines for precision machining. Industrial Robots: Motors provide motion control for industrial robots used in tasks such as welding, painting, and assembly in manufacturing and automotive industries. Electric Vehicles (EVs): Electric motors are used in electric vehicles (EVs) and hybrid electric vehicles (HEVs) for propulsion Motors are integral to industrial automation systems, providing precise control for positioning and movement in automated production lines and processes Industrial motors in logistics and material handling applications power roller and belt conveyors Conveyor systems transport goods within factories and warehouses Motors drive pumps, compressors, and drilling equipment in oil and gas extraction, refining, and transportation Motors drive equipment in food processing, including mixers, grinders, ovens, and packaging machinery Motors are used in chemical plants for agitators, pumps, and reactors involved in chemical production Motors are crucial in treatment treatment facilities' aeration, mixing, and pumping processes. Textile Industry: Motors power textile machinery such as spinning machines, looms, and dyeing equipment.Paper and Printing

Add to Cart Buy Now

Previous Next

Page 1 of 1 results