• Home /
• All Brands /
• Invento /
• Industrial Automation /
• Electric Motor Starters and Drives

Have a question? Call us now at +91 9650660070

Invento Electric Motor Starters And Drives

Showing 40 out of 906 products

Sort by

Recommended New Price : Low to High Price : High to Low

Ships within 24 hrs

Invento 7V Micro Coreless High Speed 48000 RPM Motor with 7 Teeth Plastic Gear

By Invento

₹294 - ₹518

You save ₹178!

37.71% OFF

The "Invento 7V Micro Coreless High Speed 48000 RPM Motor with 7 Teeth Plastic Gear" describes a specific type of motor and gear assembly. Let's break down the components of the name: 1. **Invento**: Likely the brand name of the product. 2. **7V**: Specifies the operating voltage of the motor. In this case, the motor operates at 7 volts. It's important to match the voltage of the motor with the power source to ensure proper operation. 3. **Micro Coreless High Speed**: Describes the type and characteristics of the motor. "Micro" indicates that it's designed for small-scale applications. "Coreless" refers to the type of motor design, which typically provides smoother operation compared to brushed motors. Coreless motors also tend to have higher efficiency and power-to-weight ratio. "High Speed" indicates that it operates at high rotational speeds. 4. **48000 RPM**: Specifies the speed of the motor. It operates at a speed of 48000 revolutions per minute (RPM), which is very high. This high speed makes it suitable for applications where rapid rotation is required. 5. **Motor with 7 Teeth Plastic Gear**: Indicates that the motor comes with a plastic gear featuring 7 teeth. Gears are often used to transmit motion or change the speed and torque of a motor's output. The number of teeth on the gear affects the gear ratio, which determines the relationship between the speed and torque of the motor's output. In summary, the "Invento 7V Micro Coreless High Speed 48000 RPM Motor with 7 Teeth Plastic Gear" is a high-speed motor designed to operate at 7 volts, with a speed of 48000 RPM. It comes with a plastic gear featuring 7 teeth, likely used to transmit motion or change the speed and torque of the motor's output.

Type of Product : Micro Coreless Motor

Suitable For : Quadcopter Helicopter Tiny Toy Drones

Outside Diameter : 2.7mm

Speed : 48000 RPM

Voltage : 3.7 V

Current : 0.8A

Material : Plastic

Overall Length : 3.7mm

Gear : 7 Teeth Plastic Gear

Output Shaft Diameter : 0.8mm

No. of Pcs : 1

Explore other Variants (4)

Ships within 5 days

Invento 9mm Extruder Drive Gear ISC 184

By Invento

₹365   ₹443

You save ₹78!

17.56% OFF

MK8 1.75mm Stainless Steel Extruder Drive Gear Hobbed Gear For Reprap 3D Printer " Material of Construction: Stainless Steel Outer Diameter: 9mm; "Holding Screw: M3- Grub screw " Compatible Motor: NEMA 17 having 5mm shaft dia Package Include: 1 x MK8 Gear

Add to Cart Buy Now

Ships within 5 days

Invento 6-18 V Geared DC Heavy Duty Motor for Robot Car DIY, Series - ISC 073

By Invento

Pack of 2 piece

₹966 - ₹4,837

You save ₹214!

18.14% OFF

The Invento Geared DC Heavy Duty Motor, specifically tailored for DIY robot car enthusiasts seeking reliable and robust performance. Crafted with precision engineering, this motor embodies power and durability, making it the perfect choice for your next DIY project. Featuring a high-torque DC motor paired with precision-engineered gears, this motor delivers exceptional performance, providing the necessary torque to propel your robot car with ease. Whether you're navigating rough terrains or maneuvering through obstacles, this motor ensures smooth operation and precise control over speed and movement. Designed with versatility in mind, the Invento Geared DC Heavy Duty Motor offers seamless integration into your robot car build. Its compact size and lightweight design make it easy to incorporate into various configurations, allowing for customization and experimentation. Durability is at the forefront of this motor's design. Constructed with high-quality materials, it can withstand the rigors of continuous use, ensuring long-lasting performance and reliability for your DIY projects. Moreover, this motor is engineered for efficiency, maximizing power output while minimizing energy consumption. This not only prolongs battery life but also enhances the overall efficiency of your robot car.

Type of Product : Geared DC Heavy Duty Motor

Speed : 500 RPM

Explore other Variants (3)

Ships within 3 days

Invento 3-6 V Bipolar Stepper Motor for CNC Robotics DIY Projects 3D Printer (Teeth 19), Series ISC 004

By Invento

Pack of 1 piece

₹601 - ₹2,477

You save ₹461!

43.41% OFF

The Invento 3-6V Bipolar Stepper Motor is an essential component tailor-made for CNC robotics, DIY projects, and 3D printers, delivering versatility, reliability, and precision. Featuring 19 teeth, this stepper motor is designed to provide optimal torque and smooth operation across a wide range of voltage settings, from 3 to 6 volts. Crafted with meticulous attention to detail, this stepper motor ensures consistent performance, making it ideal for intricate CNC machining tasks, robotics applications, and DIY projects where precise control over movement is crucial. The bipolar configuration enhances compatibility with various control systems, allowing for seamless integration into your setup. Whether you're crafting prototypes, building custom automation solutions, or delving into the world of 3D printing, this stepper motor offers the power and precision needed to bring your projects to life. Its robust construction ensures durability and longevity, even in demanding operational environments. Upgrade your CNC machine, robotics platform, or 3D printer with the Invento 3-6V Bipolar Stepper Motor, and unlock new possibilities for creativity, innovation, and precision engineering. With its reliability, versatility, and performance, this stepper motor is a must-have for any enthusiast or professional seeking to push the boundaries of their projects.

Thickness : 6 mm

Shaft Length : 10 mm

Step Angle : 1.8 deg / Step

Shaft Diameter : 5 mm

Voltage : 3-6 V

Material : Metal

Teeth : 19

Explore other Variants (4)

Related Searches

invento plastic gears

invento brushless dc motors

invento stepper motor

invento geared dc motors

invento motor starter and accessories

Ships within 5 days

Invento 3-6 V Bipolar Stepper Motor for CNC Robotics DIY Projects 3D Printer (Teeth 24), Series ISC 004-T

By Invento

Pack of 1 piece

₹813 - ₹3,421

You save ₹721!

47% OFF

The Invento 3-6V Bipolar Stepper Motor is a powerhouse designed to excel in CNC robotics, DIY projects, and 3D printing, boasting 24 teeth for enhanced precision and efficiency. Its voltage range of 3 to 6 volts provides flexibility, ensuring seamless integration with a variety of setups. Engineered with precision in mind, this stepper motor delivers smooth and reliable performance, making it ideal for intricate CNC machining, robotics tasks, and custom DIY endeavors that demand precise control over movement. The bipolar configuration enhances compatibility with different control systems, streamlining the integration process. Whether you're prototyping, automating processes, or diving into the world of 3D printing, this stepper motor offers the torque and accuracy required to bring your ideas to life. Its robust construction ensures durability and resilience, even in challenging operating environments. Upgrade your CNC machine, robotics platform, or 3D printer with the Invento 3-6V Bipolar Stepper Motor, and experience enhanced performance and precision. With its versatile tooth configuration and reliable operation, this stepper motor empowers you to tackle complex tasks with confidence, pushing the boundaries of your projects to new heights.

Thickness : 8 mm

Shaft Length : 20 mm

Torque : 4 Kg-cm

Step Angle : 1.8 deg / Step

Shaft Diameter : 5 mm

Material : Metal

Teeth : 24

Explore other Variants (4)

Ships within 4 days

Invento ISC004 4.2 Kg-cm Bipolar Stepper Motor for CNC Robotics DIY Projects 3D Printer

By Invento

₹931   ₹1,180

You save ₹249!

21.1% OFF

Add to Cart Buy Now

Ships within 5 days

Invento 3-6 V Bipolar Stepper Motor for CNC Robotics DIY Projects 3D Printer (Teeth 15), Series ISC 004-U

By Invento

Pack of 5 piece

₹813 - ₹3,421

You save ₹3,423!

50.01% OFF

The Invento 3-6V Bipolar Stepper Motor is a versatile solution crafted for CNC robotics, DIY projects, and 3D printing, featuring 15 teeth for optimized precision and performance. Its voltage range of 3 to 6 volts ensures adaptability to various power requirements, making it compatible with a wide array of setups. Engineered with meticulous attention to detail, this stepper motor guarantees smooth and consistent operation, making it well-suited for intricate CNC machining tasks, robotics applications, and custom DIY projects where precise movement control is paramount. Its bipolar configuration enhances compatibility with diverse control systems, simplifying integration into your machinery. Whether you're prototyping, automating processes, or exploring 3D printing possibilities, this stepper motor provides the necessary torque and accuracy to realize your creative endeavors. Its sturdy construction promises durability and resilience, even under demanding operational conditions. Upgrade your CNC machine, robotics platform, or 3D printer with the Invento 3-6V Bipolar Stepper Motor, and unlock new levels of performance and precision. With its dependable operation and optimized tooth configuration, this stepper motor empowers you to tackle challenging tasks confidently, pushing the boundaries of what you can achieve in your projects.

Gear OD : 13.5 mm

Type of Product : Bipolar Stepper Motor

Thickness : 14 mm

Usage For : CNC Robotics DIY Projects 3D Printer

Shaft Length : 25 mm

Torque : 4 Kg-cm

Step Angle : 1.8 deg / step

Shaft Diameter : 5 mm

Voltage : 3-6 V

Teeth : 15

Amps : 1.5 A (Max)

Pulley : GT2

Explore other Variants (4)

Ships within 5 days

Invento DC Coreless Motor with Propeller for Mini Drones ISC 1926

By Invento

Pack of 4 piece

₹459 - ₹542

You save ₹308!

37.29% OFF

Introducing the groundbreaking Invento Coreless Motor with Propeller, specifically engineered for mini drones, combining advanced propulsion technology with precision aerodynamics to deliver unparalleled performance and agility in a compact package. This innovative motor and propeller assembly is meticulously crafted to provide mini drones with the thrust and efficiency needed for dynamic aerial maneuvers, making it an essential component for drone enthusiasts and professionals alike. At the heart of this system is the coreless motor, featuring a lightweight and efficient design that maximizes power output while minimizing weight and inertia. This design choice ensures rapid acceleration, responsive control, and extended flight times, allowing mini drones to perform agile maneuvers with ease. The inclusion of a propeller further enhances aerodynamic efficiency, maximizing thrust and lift to enable sustained flight in a variety of conditions. The integration of the coreless motor and propeller is seamless, providing drone enthusiasts with a plug-and-play solution for upgrading their aircraft. Compatible with a wide range of mini drone models, this motor and propeller assembly offers versatility and ease of installation, allowing users to enhance the performance of their drones without the need for complex modifications. Safety is a top priority, and the Invento Coreless Motor with Propeller is equipped with built-in safeguards to protect against overloading, overheating, and other potential hazards. These features ensure reliable and stable operation, giving users peace of mind during flight and allowing them to focus on capturing stunning aerial footage or pushing the limits of drone performance. In summary, the Invento Coreless Motor with Propeller for mini drones represents a leap forward in propulsion technology, offering unmatched performance, agility, and reliability in a compact and easy-to-use package. Whether you're a novice pilot looking to explore the world of drone flight or a seasoned professional pushing the boundaries of aerial cinematography, this motor and propeller assembly provides the power and precision needed to elevate your flying experience to new heights.

Type of Product : Coreless Motor With Propeller

Voltage : 3.7V DC

Length : 15 cm

Size : 7x20 mm

Current : 0.8A

Shaft Diameter : 1mm

Speed : 48000 RPM

Explore other Variants (3)

Ships within 5 days

Invento DC Coreless Motor with Propeller for Mini Drones ISC 1895-N

By Invento

Pack of 4 piece

₹400 - ₹459

You save ₹261!

36.86% OFF

Introducing the groundbreaking Invento Coreless Motor with Propeller, specifically engineered for mini drones, combining advanced propulsion technology with precision aerodynamics to deliver unparalleled performance and agility in a compact package. This innovative motor and propeller assembly is meticulously crafted to provide mini drones with the thrust and efficiency needed for dynamic aerial maneuvers, making it an essential component for drone enthusiasts and professionals alike. At the heart of this system is the coreless motor, featuring a lightweight and efficient design that maximizes power output while minimizing weight and inertia. This design choice ensures rapid acceleration, responsive control, and extended flight times, allowing mini drones to perform agile maneuvers with ease. The inclusion of a propeller further enhances aerodynamic efficiency, maximizing thrust and lift to enable sustained flight in a variety of conditions. The integration of the coreless motor and propeller is seamless, providing drone enthusiasts with a plug-and-play solution for upgrading their aircraft. Compatible with a wide range of mini drone models, this motor and propeller assembly offers versatility and ease of installation, allowing users to enhance the performance of their drones without the need for complex modifications. Safety is a top priority, and the Invento Coreless Motor with Propeller is equipped with built-in safeguards to protect against overloading, overheating, and other potential hazards. These features ensure reliable and stable operation, giving users peace of mind during flight and allowing them to focus on capturing stunning aerial footage or pushing the limits of drone performance. In summary, the Invento Coreless Motor with Propeller for mini drones represents a leap forward in propulsion technology, offering unmatched performance, agility, and reliability in a compact and easy-to-use package. Whether you're a novice pilot looking to explore the world of drone flight or a seasoned professional pushing the boundaries of aerial cinematography, this motor and propeller assembly provides the power and precision needed to elevate your flying experience to new heights.

Type of Product : Coreless Motor With Propeller

Voltage : 3.7V DC

Length : 10 cm

Size : 7x16 mm

Speed : 48000 RPM

Explore other Variants (3)

Ships within 5 days

Invento Coreless Motor with Propeller for Mini Drones ISC 1523

By Invento

₹329 - ₹400

You save ₹202!

38.04% OFF

Introducing the groundbreaking Invento Coreless Motor with Propeller, specifically engineered for mini drones, combining advanced propulsion technology with precision aerodynamics to deliver unparalleled performance and agility in a compact package. This innovative motor and propeller assembly is meticulously crafted to provide mini drones with the thrust and efficiency needed for dynamic aerial maneuvers, making it an essential component for drone enthusiasts and professionals alike. At the heart of this system is the coreless motor, featuring a lightweight and efficient design that maximizes power output while minimizing weight and inertia. This design choice ensures rapid acceleration, responsive control, and extended flight times, allowing mini drones to perform agile maneuvers with ease. The inclusion of a propeller further enhances aerodynamic efficiency, maximizing thrust and lift to enable sustained flight in a variety of conditions. The integration of the coreless motor and propeller is seamless, providing drone enthusiasts with a plug-and-play solution for upgrading their aircraft. Compatible with a wide range of mini drone models, this motor and propeller assembly offers versatility and ease of installation, allowing users to enhance the performance of their drones without the need for complex modifications. Safety is a top priority, and the Invento Coreless Motor with Propeller is equipped with built-in safeguards to protect against overloading, overheating, and other potential hazards. These features ensure reliable and stable operation, giving users peace of mind during flight and allowing them to focus on capturing stunning aerial footage or pushing the limits of drone performance. In summary, the Invento Coreless Motor with Propeller for mini drones represents a leap forward in propulsion technology, offering unmatched performance, agility, and reliability in a compact and easy-to-use package. Whether you're a novice pilot looking to explore the world of drone flight or a seasoned professional pushing the boundaries of aerial cinematography, this motor and propeller assembly provides the power and precision needed to elevate your flying experience to new heights.

Type of Product : Coreless Motor With Propeller

Length : 50 mm

Material : Plastic

Suitable For : 7x20mm, 8x20mm, 8.5x20mm Coreless Motors

Mounting Hole : 1mm Motor Shaft

Explore other Variants (5)

Ships within 5 days

Invento 1.5 - 6V Mini Vibration Motor for Vibrating Electric Toys ISC 1036

By Invento

Pack of 4 piece

₹317 - ₹494

You save ₹332!

40.19% OFF

The Invento 1.5 - 6V Mini Vibration Motor is a compact and versatile motor specifically designed for vibrating electric toys. With its small size and low voltage requirements ranging from 1.5 to 6 volts, this motor is ideal for various applications where space is limited and power efficiency is crucial. The motor's miniature design allows it to fit seamlessly into the construction of electric toys, providing the necessary vibration functionality to enhance user experience and engagement. Whether incorporated into handheld devices, interactive toys, or sensory gadgets, this motor adds an element of tactile feedback that enhances the overall play or user interaction. Despite its small size, the Invento Mini Vibration Motor delivers reliable performance and durability, ensuring consistent operation over extended periods. Its low voltage requirement also makes it suitable for battery-powered toys, prolonging battery life and reducing energy consumption. Overall, the Invento 1.5 - 6V Mini Vibration Motor is a versatile and efficient solution for adding vibration functionality to electric toys, contributing to an enhanced sensory experience for users of all ages.

Motor Voltage : 1.5-6 V

Speed : 14000 rpm

Explore other Variants (3)

Ships within 4 days

Invento DC 3.7 V Micro Coreless High Speed Stepper Motor for Tiny Toy Drones, ISC 1027

By Invento

Pack of 4 piece

₹530 - ₹601

You save ₹367!

38.88% OFF

The Invento DC 3.7V Micro Coreless High-Speed Stepper Motor is a compact and powerful solution tailored specifically for tiny toy drones. With a motor length of 20 mm, this motor offers an optimal balance between size and performance, making it ideal for integration into small-scale aerial vehicles. Designed with a coreless construction, this stepper motor delivers exceptional power-to-weight ratio, ensuring minimal weight and size without compromising on performance. Its high-speed capabilities enable agile and responsive maneuverability, allowing for dynamic flight control and exciting aerial maneuvers. Crafted with precision engineering, this motor ensures reliable and consistent operation, providing smooth and stable flight performance. Whether you're flying miniature quadcopters or tiny racing drones, this motor delivers the thrust and responsiveness needed for thrilling aerial adventures. Upgrade your tiny toy drones with the Invento DC 3.7V Micro Coreless High-Speed Stepper Motor, and experience enhanced agility and performance. With its compact design and impressive speed, this motor elevates the capabilities of your drones, unlocking new possibilities for exhilarating flight experiences.

Type of Product : Stepper Motor

Usage For : Tiny Toy Drones

Shaft Diameter : 1mm

Power : DC 3.7V

Motor Length (mm) : 20mm

Speed : 39000 rpm

Motor Diameter : 8.5mm

Explore other Variants (3)

Ships within 4 days

Invento 3-6 V Stepper Motor Helical Spur Gear for CNC Robotics Reprap 3D Printer (Teeth 13), Series ISC 004-V

By Invento

₹530 - ₹2,005

You save ₹1,535!

43.36% OFF

The 3-6V Stepper Motor 13 Teeth Helical Spur Gear is an essential component designed to enhance the performance and precision of CNC robotics and Reprap 3D printers. Crafted with meticulous attention to detail, this gear features 13 teeth arranged in a helical pattern, ensuring smooth and efficient operation in various applications. With a voltage range of 3 to 6 volts, this stepper motor gear offers versatility, allowing it to adapt to different power requirements while maintaining consistent performance. Whether you're working on intricate CNC machining projects or intricate 3D printing tasks, this gear delivers reliable torque and rotation, enabling precise control over movement and positioning. The helical design of the gear teeth minimizes backlash and ensures smoother motion, reducing vibration and improving overall print or machining quality. Its durable construction ensures long-lasting durability, even under demanding operational conditions. Compatible with a wide range of stepper motors and printer setups, this gear is a valuable addition to any robotics or 3D printing enthusiast's toolkit. Upgrade your machine with the 3-6V Stepper Motor 13 Teeth Helical Spur Gear for enhanced performance and unparalleled precision.

Type of Product : Stepper Motor with 13 teeth Helical Spur Gear

Usage For : CNC Robotics RepRap 3D Printer

Shaft Length : 20mm

Torque : 3Kg-cm

Step Angle : 3.75 deg / step

Shaft Diameter : 3mm

Motor Size : 42x42x30mm

Power : 3-6 V

Package Contains : 1 x Nema 17 Stepper Motor

Pack of : Pack of 1

Explore other Variants (4)

Ships within 5 days

Invento 6V-12V 9500 RPM Multi-Purpose DC Motor ISC 1175-2

By Invento

Pack of 4 piece

₹1,297   ₹2,242

You save ₹945!

42.15% OFF

Add to Cart Buy Now

Ships within 3 days

Invento 900 mAh Polymer Li-ion battery ISC 900

By Invento

₹601   ₹2,360

You save ₹1,759!

74.53% OFF

900 mAh Battery Capacity. Voltage: 3.7 Volts Package Include 1 x 900 mAh Battery Application: Small DRONES, GPS,Mp4 player, DVD,Mobiles backup power supply,Power bank,Tablet PC and other device Battery Size: 45x40x5mm

Add to Cart Buy Now

Ships within 3 days

Invento 650 mAh Mini Drone Battery ISC 899

By Invento

₹766   ₹1,888

You save ₹1,122!

59.43% OFF

650 mAh Battery Capacity. Voltage: 3.7 Volts Battery Size: 42 x 25 x 8 mm Application: Mini Drones, pocket camera, Quadcopter, Helicopter, RC Car, RC Planes, DIY Projects Package Include 1 x 650 mAh Battery

Add to Cart Buy Now

Ships within 4 days

Invento 50x30 mm Bipolar Stepper Motor, Series - ISC 1653

By Invento

Pack of 5 piece

₹754 - ₹1,769

You save ₹1,299!

42.34% OFF

The Invento 50x30 mm Bipolar Stepper Motor, Series ISC 1653, is a high-performance motor designed for precise motion control in various applications. With a compact 50x30 mm frame size, this stepper motor delivers excellent torque and accuracy, making it ideal for use in robotics, automation, and CNC machinery. Its bipolar design enables efficient operation by using two separate windings that drive the motor in a precise, controlled manner. The ISC 1653 boasts a high step resolution, which ensures smooth and accurate movements. Its robust construction and high-quality materials contribute to long-term reliability and durability. The motor's step angle is meticulously engineered to offer precise control over positioning, essential for tasks that require fine adjustments. With a wide operating voltage range and compatibility with various drive systems, the ISC 1653 offers flexibility in different setups. Its efficient performance reduces power consumption while maintaining high torque output. Whether used in industrial automation or hobbyist projects, the Invento 50x30 mm Bipolar Stepper Motor provides reliable and accurate motion control, making it a valuable component for high-precision applications.

Type of Product : Bipolar Stepper Motor

Thickness : 7mm

Shaft Length : 10mm

Torque : 2.5 Kg-cm

Step Angle : 7.5 Degree

Shaft Diameter : 3mm

Voltage : 24V

Motor Diameter : 50mm

Gear Dia : 9.4mm

No. of Phases : 2 Phase

Current : 1A

Motor Height (mm) : 30mm

No. of Teeth : 17

Explore other Variants (3)

Ships within 4 days

Invento ISC 238 Nema 17 Round 50mm Stepper Motor 4 Kg-Cm Stepper Motor for CNC/Robotics/DIY Projects

By Invento

₹872   ₹1,237

You save ₹365!

29.49% OFF

Add to Cart Buy Now

Ships within 5 days

Invento Nema 23 Stepper Motor 25 Kg-cm Holding Torque with 2-Phase 24-50 V DC 5.6 A Digital Controller Driver, ISC 1160-M

By Invento

₹6,725 - ₹12,979

You save ₹3,276!

32.75% OFF

The Invento NEMA 23 Stepper Motor ISC 1160-M is a high-performance motion-control solution designed for applications requiring substantial holding torque, precise positioning, and reliable stepper motor operation. This NEMA 23 motor delivers approximately 25 Kg-cm of holding torque, making it suitable for demanding automation and motion-control systems. The package includes a 2-phase digital controller driver that operates within a 24–50 V DC input range and supports up to 5.6 A output current, enabling accurate step control, smooth motion, and stable motor performance. The combination of a powerful stepper motor and digital driver provides dependable operation for applications that require repeatable positioning and controlled movement. Suitable for CNC machines, engraving systems, robotics projects, automation equipment, conveyor mechanisms, linear motion assemblies, and DIY engineering applications, the ISC 1160-M motor and driver set supports a wide range of precision motion-control requirements. It can be integrated into custom machinery, prototype development projects, automated positioning systems, and industrial equipment where high torque and accurate movement are essential. Designed for engineers, technicians, students, hobbyists, and developers, this combination is ideal for testing environments, product development activities, and industrial automation applications. Its NEMA 23 frame size, 25 Kg-cm holding torque, and digital driver control make it a practical solution for medium- to high-performance motion-control systems.

Type of Product : Stepper Motor with Digital Controller Driver

Step Angle : 1.8°

Holding Torque : 25 Kg-cm

Rated Current : 3 A/Phase (Peak Value)

Rated Voltage : 3.6 V

Phase : 2-Phase

Model Name : Stepper Motor: Nema 23

Power Supply : 24-50 V DC

Phase Inductance : 4 mH±20% (1kHz 1V RMS)

Phase Resistance : 1.2 Ω±10% (20°C)

Maximum Output Current : 5.6 A

Shaft Size : 8 mm

Insulation Class : B (130°), 80K Max.

Explore other Variants (2)

Ships within 6 days

Invento 18 Teeth 69x15mm Helical Left Hand Spur Gear for DIY Projects ISC 1907

By Invento

Pack of 2 piece

₹671 - ₹1,651

Introducing Invento Plastic Gears, precision-engineered components designed to provide reliable and efficient power transmission in various mechanical systems and DIY projects. These plastic gears offer a lightweight and cost-effective solution for applications where metal gears may be impractical or unnecessary. Invento Plastic Gears are crafted from high-quality materials to ensure durability and longevity, despite their lightweight construction. They are designed to withstand moderate loads and provide smooth and efficient operation, making them suitable for a wide range of applications, including robotics, model-making, and educational projects. One of the key advantages of Invento Plastic Gears is their versatility. Available in various sizes, shapes, and gear ratios, these gears can be easily adapted to suit different project requirements. Whether you need spur gears, worm gears, bevel gears, or other types, Invento offers a comprehensive range to meet your needs. Additionally, plastic gears offer quieter operation compared to metal gears, making them ideal for applications where noise is a concern. Their smooth and precise performance ensures minimal vibration and friction, resulting in quieter operation and improved overall user experience. Furthermore, Invento Plastic Gears are easy to work with and customize. They can be drilled, cut, or modified to fit specific project specifications, allowing for greater flexibility and customization options. Whether you're a hobbyist, educator, or professional, these gears provide a versatile and reliable solution for your mechanical projects. In summary, Invento Plastic Gears are an excellent choice for those seeking lightweight, durable, and cost-effective gear solutions for their projects. With their versatility, reliability, and ease of customization, these gears offer endless possibilities for creativity and innovation in various mechanical applications.

Compatible shaft size : 6 mm

Thickness : 15mm

Outer Diameter : 69 mm

No. of Teeth : 18

Explore other Variants (3)

Ships within 6 days

Invento 18 Teeth 69x15mm Helical Right Hand Spur Gear for DIY Projects ISC 1907-1

By Invento

Pack of 2 piece

₹671 - ₹1,651

Introducing Invento Plastic Gears, precision-engineered components designed to provide reliable and efficient power transmission in various mechanical systems and DIY projects. These plastic gears offer a lightweight and cost-effective solution for applications where metal gears may be impractical or unnecessary. Invento Plastic Gears are crafted from high-quality materials to ensure durability and longevity, despite their lightweight construction. They are designed to withstand moderate loads and provide smooth and efficient operation, making them suitable for a wide range of applications, including robotics, model-making, and educational projects. One of the key advantages of Invento Plastic Gears is their versatility. Available in various sizes, shapes, and gear ratios, these gears can be easily adapted to suit different project requirements. Whether you need spur gears, worm gears, bevel gears, or other types, Invento offers a comprehensive range to meet your needs. Additionally, plastic gears offer quieter operation compared to metal gears, making them ideal for applications where noise is a concern. Their smooth and precise performance ensures minimal vibration and friction, resulting in quieter operation and improved overall user experience. Furthermore, Invento Plastic Gears are easy to work with and customize. They can be drilled, cut, or modified to fit specific project specifications, allowing for greater flexibility and customization options. Whether you're a hobbyist, educator, or professional, these gears provide a versatile and reliable solution for your mechanical projects. In summary, Invento Plastic Gears are an excellent choice for those seeking lightweight, durable, and cost-effective gear solutions for their projects. With their versatility, reliability, and ease of customization, these gears offer endless possibilities for creativity and innovation in various mechanical applications.

Compatible shaft size : 6 mm

Thickness : 15mm

Outer Diameter : 69 mm

No. of Teeth : 18

Explore other Variants (3)

Ships within 6 days

Invento 3D Printed Spur Gear 1.5 Module, ISC 2048 (No. of Teeth: 14/18 - 22/50)

By Invento

₹424 - ₹860

You save ₹99!

14.11% OFF

The Invento 3D Printed Spur Gear ISC 2048 is a precision-manufactured mechanical component designed for efficient power transmission and smooth rotational motion in parallel shaft systems. Featuring a 1.5 module gear profile, this spur gear is produced from durable 3D printed plastic, offering a lightweight and practical solution for mechanical prototypes, educational models, and low to moderate load applications. Available in multiple tooth count variants ranging from 14 to 50 teeth, it provides flexibility in creating different gear ratios to meet specific speed and torque requirements. The accurately formed teeth ensure reliable meshing and consistent mechanical performance. Ideal for use in robotics, automation projects, gear trains, mechanical models, DIY engineering applications, and educational demonstrations, the ISC 2048 spur gear supports precise torque transfer and controlled rotational movement. Its lightweight construction simplifies integration into custom assemblies while allowing rapid prototyping and design modifications. Commonly used in prototype gearboxes and experimental motion systems, this gear offers versatility for a wide range of development and testing applications. Suitable for students, hobbyists, educators, and engineers, the Invento ISC 2048 provides a dependable solution for projects requiring efficient gear engagement and smooth mechanical operation.

Compatible shaft size : 5 mm

Teeth Type : Straight

Type of Product : Spur Gear

Module : 1.5 Module

Color : Assorted

Material : Plastic

Country of Origin : India

Pack of : 1 Kit

Design : 3D Printed

Notes : Color of Gear may be changed from picture

Explore other Variants (14)

Ships within 6 days

Invento 3D Printed Spur Gear Plastic, ISC 2047 (No. of Teeth: 14/18 - 22/50)

By Invento

₹353 - ₹966

You save ₹53!

10.66% OFF

The Invento 3D Printed Spur Gear ISC 2047 is a lightweight and precision-manufactured mechanical component designed for efficient rotational power transmission in parallel shaft systems. Produced using durable 3D printed plastic, this spur gear is available in a range of tooth configurations from 14 to 50 teeth, providing flexibility for creating various gear ratios in mechanical assemblies. The accurately formed gear teeth ensure smooth meshing, consistent motion transfer, and reliable operation, making it suitable for prototyping, educational models, and low to moderate load applications. Ideal for use in robotics, automation projects, mechanical models, DIY engineering applications, and educational demonstrations, the ISC 2047 spur gear supports efficient torque transfer and controlled rotational movement. Its lightweight plastic construction reduces overall system weight while enabling quick design modifications and rapid prototyping. Commonly used in gear trains, custom gearboxes, and experimental mechanical systems, this spur gear offers versatility for a wide range of development and testing requirements. Suitable for students, hobbyists, and engineers, it provides a practical solution for projects requiring dependable gear engagement and smooth mechanical operation.

Compatible shaft size : 8 mm

Teeth Type : Straight

Type of Product : Spur Gear

Module : 1.5 Module

Color : Assorted

Material : Plastic

Pack of : 1 Kit

Design : 3D Printed

Notes : Color of Gear may be changed from picture

Explore other Variants (14)

Ships within 6 days

Invento 10 Teeth 40x20mm Helical Right Hand Spur Gear for DIY Projects ISC 1905-1

By Invento

Pack of 2 piece

₹506 - ₹907

Introducing Invento Plastic Gears, precision-engineered components designed to provide reliable and efficient power transmission in various mechanical systems and DIY projects. These plastic gears offer a lightweight and cost-effective solution for applications where metal gears may be impractical or unnecessary. Invento Plastic Gears are crafted from high-quality materials to ensure durability and longevity, despite their lightweight construction. They are designed to withstand moderate loads and provide smooth and efficient operation, making them suitable for a wide range of applications, including robotics, model-making, and educational projects. One of the key advantages of Invento Plastic Gears is their versatility. Available in various sizes, shapes, and gear ratios, these gears can be easily adapted to suit different project requirements. Whether you need spur gears, worm gears, bevel gears, or other types, Invento offers a comprehensive range to meet your needs. Additionally, plastic gears offer quieter operation compared to metal gears, making them ideal for applications where noise is a concern. Their smooth and precise performance ensures minimal vibration and friction, resulting in quieter operation and improved overall user experience. Furthermore, Invento Plastic Gears are easy to work with and customize. They can be drilled, cut, or modified to fit specific project specifications, allowing for greater flexibility and customization options. Whether you're a hobbyist, educator, or professional, these gears provide a versatile and reliable solution for your mechanical projects. In summary, Invento Plastic Gears are an excellent choice for those seeking lightweight, durable, and cost-effective gear solutions for their projects. With their versatility, reliability, and ease of customization, these gears offer endless possibilities for creativity and innovation in various mechanical applications.

Compatible shaft size : 6 mm

Thickness : 20mm

Outer Diameter : 40 mm

No. of Teeth : 10

Explore other Variants (3)

Ships within 6 days

Invento 3D Printed Spur Gear 1.5 Module, Pack of 2 Kit, ISC 2048-A (No. of Teeth: 14/18 - 22/50)

By Invento

Pack of 2 kit

₹530 - ₹1,533

The Invento 3D Printed Spur Gear ISC 2048-A is a precision-engineered mechanical gear kit designed for efficient rotational power transmission in parallel shaft systems. Manufactured from durable 3D printed plastic and featuring a 1.5 module gear profile, this kit provides a lightweight and practical solution for prototyping, educational projects, and custom mechanical assemblies. Supplied as a pack of 2, it is available in multiple tooth count combinations ranging from 14 to 50 teeth, allowing the creation of various gear ratios to meet different speed and torque requirements. The accurately formed gear teeth ensure smooth meshing, stable operation, and reliable motion transfer. Ideal for use in robotics, automation systems, mechanical models, DIY engineering projects, and educational demonstrations, the ISC 2048-A spur gear kit supports precise torque transmission and controlled rotational movement. Its lightweight construction simplifies integration into compact assemblies while enabling rapid prototyping and design modifications. Commonly used in gear trains, prototype gearboxes, and experimental motion control systems, this gear kit offers flexibility for testing and development applications. Suitable for students, hobbyists, educators, and engineers, it provides a dependable solution for projects requiring accurate gear engagement, smooth performance, and efficient mechanical operation.

Compatible shaft size : 5 mm

Teeth Type : Straight

Type of Product : Spur Gear

Module : 1.5 Module

Color : Assorted

Material : Plastic

Country of Origin : India

Pack of : 2 Kit

Design : 3D Printed

Notes : Color of Gear may be changed from picture

Explore other Variants (14)

Ships within 6 days

Invento 3D Printed Spur Gear 1.5 Module, Pack of 4 Kit, ISC 2046-B (No. of Teeth: 14/18 - 22/50)`

By Invento

Pack of 4 kit

₹601 - ₹2,831

The Invento 3D Printed Spur Gear ISC 2046-B is a precision mechanical gear kit designed for efficient power transmission in parallel shaft systems. Manufactured using durable 3D printed plastic, this 1.5 module spur gear set offers a lightweight yet functional solution for a variety of mechanical design and prototyping applications. Supplied as a pack of 4, it includes multiple tooth options ranging from 14 to 50 teeth, allowing flexible configuration of gear ratios based on project requirements. The accurately shaped tooth profile ensures smooth meshing, stable rotation, and reliable motion transfer in compact assemblies. Ideal for use in robotics, automation systems, mechanical models, DIY engineering projects, and educational demonstrations, the ISC 2046-B spur gear kit supports effective torque transmission and motion control in experimental setups. It is commonly used in gear trains, prototype gearboxes, and learning-based mechanical systems where multiple gear configurations are needed for testing and optimization. The 3D printed construction enables quick prototyping, easy modification, and design flexibility. Suitable for students, hobbyists, and engineers, this 4-piece gear kit is ideal for development work, testing, and integration into lightweight mechanical systems requiring precise and consistent gear engagement.

Compatible shaft size : 6 mm

Teeth Type : Straight

Type of Product : Spur Gear

Module : 1.5 Module

Color : Assorted

Material : Plastic

Country of Origin : India

Pack of : 4 Kit

Design : 3D Printed

Notes : Color of Gear may be changed from picture

Explore other Variants (14)

Ships within 6 days

Invento 10 Teeth 40x20mm Helical Left Hand Spur Gear for DIY Projects ISC 1905

By Invento

Pack of 2 piece

₹506 - ₹907

Introducing Invento Plastic Gears, precision-engineered components designed to provide reliable and efficient power transmission in various mechanical systems and DIY projects. These plastic gears offer a lightweight and cost-effective solution for applications where metal gears may be impractical or unnecessary. Invento Plastic Gears are crafted from high-quality materials to ensure durability and longevity, despite their lightweight construction. They are designed to withstand moderate loads and provide smooth and efficient operation, making them suitable for a wide range of applications, including robotics, model-making, and educational projects. One of the key advantages of Invento Plastic Gears is their versatility. Available in various sizes, shapes, and gear ratios, these gears can be easily adapted to suit different project requirements. Whether you need spur gears, worm gears, bevel gears, or other types, Invento offers a comprehensive range to meet your needs. Additionally, plastic gears offer quieter operation compared to metal gears, making them ideal for applications where noise is a concern. Their smooth and precise performance ensures minimal vibration and friction, resulting in quieter operation and improved overall user experience. Furthermore, Invento Plastic Gears are easy to work with and customize. They can be drilled, cut, or modified to fit specific project specifications, allowing for greater flexibility and customization options. Whether you're a hobbyist, educator, or professional, these gears provide a versatile and reliable solution for your mechanical projects. In summary, Invento Plastic Gears are an excellent choice for those seeking lightweight, durable, and cost-effective gear solutions for their projects. With their versatility, reliability, and ease of customization, these gears offer endless possibilities for creativity and innovation in various mechanical applications.

Compatible shaft size : 6 mm

Thickness : 20mm

Outer Diameter : 40 mm

No. of Teeth : 10

Explore other Variants (3)

Ships within 6 days

Invento 3D Printed Spur Gear 1.5 Module, Pack of 2 Kit, ISC 2046-A (No. of Teeth: 14/18 - 22/50)

By Invento

Pack of 2 kit

₹435 - ₹1,533

The Invento 3D Printed Spur Gear ISC 2046-A is a precision mechanical gear set designed for efficient power transmission in parallel shaft systems. Manufactured using durable 3D printed plastic, this 1.5 module spur gear offers a lightweight yet functional solution for a variety of mechanical and prototyping applications. It comes as a pack of 2, with multiple tooth configurations available ranging from 14 to 50 teeth, allowing flexibility in selecting appropriate gear ratios for different design requirements. The accurately formed tooth profile ensures smooth meshing and consistent rotational movement. Ideal for use in robotics, automation systems, mechanical prototypes, DIY engineering projects, and educational models, the ISC 2046-A spur gear kit supports reliable torque transfer and motion control in compact assemblies. It is commonly used in gear trains, experimental gearboxes, and learning-based mechanical setups where adaptability and ease of prototyping are essential. The 3D printed construction enables quick design testing and customization for various engineering applications. Suitable for students, hobbyists, and developers, this gear kit is ideal for prototyping, testing, and integration into lightweight mechanical systems requiring accurate and efficient gear engagement.

Compatible shaft size : 6 mm

Teeth Type : Straight

Type of Product : Spur Gear

Module : 1.5 Module

Color : Assorted

Material : Plastic

Country of Origin : India

Pack of : 2 Kit

Explore other Variants (14)

Ships within 6 days

Invento 3D Printed Bevel Gear Plastic Straight 12/20 Teeth & 33/53 mm Outer Diameter 2.5 Module Grey & Yellow, ISC 1915 (Compatible Shaft Size: 5mm - 8mm)

By Invento

Pack of 6 kit

₹636 - ₹3,421

You save ₹677!

24.18% OFF

The Invento 3D Printed Bevel Gear ISC 1915 is a precision-manufactured gear set designed for efficient torque and motion transmission between intersecting shafts. Constructed from durable 3D printed plastic, this straight bevel gear pair features 12 and 20 teeth configurations with outer diameters of 33 mm and 53 mm respectively, based on a 2.5 module gear profile. The accurately formed gear teeth ensure smooth meshing, reliable power transfer, and consistent rotational performance while maintaining a lightweight structure suitable for prototyping and custom mechanical assemblies. The grey and yellow color combination allows easy identification of mating gear components during installation and maintenance. Compatible with shaft sizes ranging from 5 mm to 8 mm, the ISC 1915 bevel gear set is ideal for use in robotics, automation systems, educational models, mechanical prototypes, and DIY engineering projects. Its straight bevel tooth design enables effective transmission of rotational motion between shafts positioned at an angle, making it suitable for compact gearboxes, motion-control mechanisms, and custom machinery designs. The 3D printed construction supports rapid prototyping, easy customization, and efficient integration into experimental systems. Suitable for students, hobbyists, and engineers, this bevel gear set provides dependable angular power transmission, precise gear engagement, and reliable mechanical performance in lightweight applications.

Teeth Type : Straight

Type of Product : Bevel Gear

Outer Diameter : 33 mm, 53 mm

No. of Teeth : 12 Teeth + 20 Teeth

Hub Length : 10 mm

Module : 2.5 Module

Hub Diameter : 20 mm

Color : Grey & Yellow

Material : Plastic

Country of Origin : India

Design : 3D Printed

Notes : Color of Gear may be changed from picture. If you have any specific color requirement please contact us before ordering.

Explore other Variants (18)

Ships within 6 days

Invento 3D Printed Spur Gear 1.5 Module, ISC 2046 (No. of Teeth: 14/18 - 22/50)

By Invento

₹353 - ₹837

You save ₹64!

9.11% OFF

The Invento 3D Printed Spur Gear ISC 2046 is a precision-engineered mechanical gear component designed for smooth and efficient power transmission in rotary systems. Manufactured using durable 3D printed plastic, this spur gear features a 1.5 module specification and is available in multiple tooth configurations ranging from 14 to 50 teeth, making it suitable for a variety of gear ratio requirements. Its lightweight construction ensures easy integration into compact mechanical assemblies while maintaining adequate strength for low to moderate load applications. The precise tooth profile enables consistent meshing with compatible gears for stable motion transfer. Ideal for use in robotics, automation systems, mechanical models, DIY engineering projects, and educational demonstrations, the ISC 2046 spur gear is widely used in gear trains, small gearboxes, and prototype mechanical systems. It supports efficient rotational power transmission in parallel shaft configurations, ensuring smooth and reliable operation. The 3D printed design allows flexibility in prototyping and customization for different mechanical setups. Available in pack sizes ranging from 14 teeth to 50 teeth variants, this spur gear is suitable for design development, testing, educational use, and integration into lightweight mechanical systems requiring precise and consistent gear engagement.

Compatible shaft size : 6 mm

Teeth Type : Straight

Type of Product : Spur Gear

Module : 1.5 Module

Color : Assorted

Material : Plastic

Country of Origin : India

Pack of : 1 Kit

Design : 3D Printed

Notes : Color of Gear may be changed from picture

Explore other Variants (14)

Ships within 6 days

Invento 50x18mm Spur Gear for DIY Projects ISC 1982

By Invento

Pack of 4 piece

₹412 - ₹719

Introducing Invento Plastic Gears, precision-engineered components designed to provide reliable and efficient power transmission in various mechanical systems and DIY projects. These plastic gears offer a lightweight and cost-effective solution for applications where metal gears may be impractical or unnecessary. Invento Plastic Gears are crafted from high-quality materials to ensure durability and longevity, despite their lightweight construction. They are designed to withstand moderate loads and provide smooth and efficient operation, making them suitable for a wide range of applications, including robotics, model-making, and educational projects. One of the key advantages of Invento Plastic Gears is their versatility. Available in various sizes, shapes, and gear ratios, these gears can be easily adapted to suit different project requirements. Whether you need spur gears, worm gears, bevel gears, or other types, Invento offers a comprehensive range to meet your needs. Additionally, plastic gears offer quieter operation compared to metal gears, making them ideal for applications where noise is a concern. Their smooth and precise performance ensures minimal vibration and friction, resulting in quieter operation and improved overall user experience. Furthermore, Invento Plastic Gears are easy to work with and customize. They can be drilled, cut, or modified to fit specific project specifications, allowing for greater flexibility and customization options. Whether you're a hobbyist, educator, or professional, these gears provide a versatile and reliable solution for your mechanical projects. In summary, Invento Plastic Gears are an excellent choice for those seeking lightweight, durable, and cost-effective gear solutions for their projects. With their versatility, reliability, and ease of customization, these gears offer endless possibilities for creativity and innovation in various mechanical applications.

Thickness : 18mm

Outer Diameter : 50 mm

Explore other Variants (3)

Ships within 6 days

Invento 3D Printed Spur Gear 1.5 Module, Pack of 5 Kit, ISC 2046-C (No. of Teeth: 14/22 - 22/50)

By Invento

Pack of 5 kit

₹943 - ₹3,421

You save ₹277!

11.55% OFF

The Invento 3D Printed Spur Gear ISC 2046-C is a precision-engineered mechanical gear kit designed for efficient power transmission and motion control in parallel shaft systems. Manufactured from durable 3D printed plastic, this 1.5 module spur gear set offers a lightweight yet reliable solution for prototyping, educational, and mechanical design applications. Supplied as a pack of 5, the kit is available in various tooth count combinations ranging from 14 to 50 teeth, enabling the creation of different gear ratios to meet specific speed and torque requirements. Its accurately formed tooth profile ensures smooth meshing, stable rotation, and consistent mechanical performance. Ideal for use in robotics, automation projects, mechanical models, DIY engineering applications, and educational demonstrations, the ISC 2046-C gear kit supports dependable motion transfer and efficient gear train operation. The 3D printed construction allows rapid prototyping and easy customization, making it suitable for testing and development environments where design flexibility is important. Commonly used in prototype gearboxes, motion systems, and learning-based mechanical assemblies, this spur gear kit provides multiple configuration options for a wide range of applications. Suitable for students, hobbyists, and engineers, it offers a practical solution for projects requiring precise and reliable gear engagement.

Compatible shaft size : 6 mm

Teeth Type : Straight

Type of Product : Spur Gear

Module : 1.5 Module

Color : Assorted

Material : Plastic

Country of Origin : India

Pack of : 5 Kit

Notes : Color of Gear may be changed from picture

Explore other Variants (13)

Ships within 6 days

Invento 80x30mm Spur Gear for DIY Projects ISC 1985

By Invento

₹542 - ₹1,415

Introducing Invento Plastic Gears, precision-engineered components designed to provide reliable and efficient power transmission in various mechanical systems and DIY projects. These plastic gears offer a lightweight and cost-effective solution for applications where metal gears may be impractical or unnecessary. Invento Plastic Gears are crafted from high-quality materials to ensure durability and longevity, despite their lightweight construction. They are designed to withstand moderate loads and provide smooth and efficient operation, making them suitable for a wide range of applications, including robotics, model-making, and educational projects. One of the key advantages of Invento Plastic Gears is their versatility. Available in various sizes, shapes, and gear ratios, these gears can be easily adapted to suit different project requirements. Whether you need spur gears, worm gears, bevel gears, or other types, Invento offers a comprehensive range to meet your needs. Additionally, plastic gears offer quieter operation compared to metal gears, making them ideal for applications where noise is a concern. Their smooth and precise performance ensures minimal vibration and friction, resulting in quieter operation and improved overall user experience. Furthermore, Invento Plastic Gears are easy to work with and customize. They can be drilled, cut, or modified to fit specific project specifications, allowing for greater flexibility and customization options. Whether you're a hobbyist, educator, or professional, these gears provide a versatile and reliable solution for your mechanical projects. In summary, Invento Plastic Gears are an excellent choice for those seeking lightweight, durable, and cost-effective gear solutions for their projects. With their versatility, reliability, and ease of customization, these gears offer endless possibilities for creativity and innovation in various mechanical applications.

Thickness : 30mm

Outer Diameter : 80 mm

Explore other Variants (3)

Ships within 6 days

Invento Nema 17 Stepper Motor 4.2 Kg-cm + TB6600 Stepper Driver + Flexible Coupling + M6 1 mm Pitch Threaded Rod + Brass Nut, Pack of 4 Kit, ISC 220-E (Rod Length: 100mm - 1000mm)

By Invento

Pack of 4 kit

₹12,979 - ₹14,159

You save ₹5,441!

27.76% OFF

The Invento Nema 17 Stepper Motor Kit ISC 220-E is a comprehensive multi-axis linear motion solution designed for precision positioning, automation systems, and engineering applications. This pack of 4 kits includes Nema 17 stepper motors with a holding torque of 4.2 Kg-cm, TB6600 stepper motor drivers, flexible shaft couplings, M6 threaded rods with a 1 mm pitch, and matching brass nuts. Available with rod lengths ranging from 100 mm to 1000 mm, each assembly is engineered to convert rotational motion into accurate and repeatable linear travel. The TB6600 drivers ensure stable and precise motor control, while the flexible couplings provide efficient torque transmission and help compensate for minor shaft alignment variations, supporting smooth and reliable operation. Suitable for CNC machines, robotics systems, automated positioning equipment, laboratory instruments, linear actuator assemblies, and custom engineering projects, the ISC 220-E kit delivers dependable motion control across multiple axes. The M6 threaded rod and brass nut combination enables fine positioning and controlled displacement, making it ideal for sliding mechanisms, actuator systems, adjustable fixtures, lifting platforms, and prototype machinery. Designed for engineers, educators, students, hobbyists, and machine builders, this pack of 4 kits simplifies system integration by providing compatible mechanical and electronic components in a coordinated set. Its compact design, precise thread pitch, and flexible rod length options make it a versatile solution for industrial, educational, and prototyping applications requiring accurate and consistent linear positioning.

Type of Product : Stepper Motor + Stepper Driver + Flexible Coupling + Threaded Rod + Brass Nut

Package Contains : 4x Nema 23 Stepper Motor, 4x TB6600 Stepper Driver, 4x Flexible coupling, 4x Threaded Rod, 4x Brass Nut

Material : Alloy Steel

Pack of : 4 Kit

Nut Material : Brass

Model Name : Stepper Motor: Nema 17

Step Angle : 1.8°

Outside Diameter : Rod: 6 mm

Thread Type : M6

Rod Material : Stainless Steel 304

Coupling Size : 5-6 mm

Rated Voltage : 3.6 V DC

Pitch : 1 mm

Torque : 4.2 Kg-cm

Shaft Length : Stepper Motor: 22 mm

Shaft Outer Diameter : Stepper Motor: 5 mm

Explore other Variants (9)

Ships within 6 days

Invento 12v 10 Kg-cm 60 RPM Side Shaft High Torque Geared DC Motor, Series - ISC 1600-C

By Invento

Pack of 2 piece

₹1,297 - ₹4,247

The Invento Side Shaft High Torque Geared DC Motor, a powerhouse of precision engineering designed to meet the demands of various applications. With a robust build and superior performance, this motor is engineered to deliver exceptional torque output while maintaining efficiency. At its core, this motor features a high-quality DC motor coupled with precision-engineered gears. The combination of these components ensures smooth operation and precise control over speed and torque. Whether it's powering machinery, robotics, or automation systems, this motor offers reliable performance in demanding environments. One of the standout features of the Invento Side Shaft High Torque Geared DC Motor is its side shaft design. This unique configuration allows for easy integration into a wide range of setups, providing flexibility and convenience in installation. With a focus on durability, this motor is built to withstand rigorous use. Its sturdy construction and high-quality materials ensure longevity and reliability, making it a dependable choice for industrial and commercial applications. Additionally, this motor is designed with efficiency in mind, maximizing power output while minimizing energy consumption. This not only reduces operating costs but also contributes to environmental sustainability.

Type of Product : Side Shaft High Torque Geareded DC Motor

Explore other Variants (3)

Ships within 6 days

Invento Yellow Plastic Spur Gear For DIY Project 60 mm ISC 1451

By Invento

Set of 4 piece

₹400 - ₹695

Introducing Invento Plastic Gears, precision-engineered components designed to provide reliable and efficient power transmission in various mechanical systems and DIY projects. These plastic gears offer a lightweight and cost-effective solution for applications where metal gears may be impractical or unnecessary. Invento Plastic Gears are crafted from high-quality materials to ensure durability and longevity, despite their lightweight construction. They are designed to withstand moderate loads and provide smooth and efficient operation, making them suitable for a wide range of applications, including robotics, model-making, and educational projects. One of the key advantages of Invento Plastic Gears is their versatility. Available in various sizes, shapes, and gear ratios, these gears can be easily adapted to suit different project requirements. Whether you need spur gears, worm gears, bevel gears, or other types, Invento offers a comprehensive range to meet your needs. Additionally, plastic gears offer quieter operation compared to metal gears, making them ideal for applications where noise is a concern. Their smooth and precise performance ensures minimal vibration and friction, resulting in quieter operation and improved overall user experience. Furthermore, Invento Plastic Gears are easy to work with and customize. They can be drilled, cut, or modified to fit specific project specifications, allowing for greater flexibility and customization options. Whether you're a hobbyist, educator, or professional, these gears provide a versatile and reliable solution for your mechanical projects. In summary, Invento Plastic Gears are an excellent choice for those seeking lightweight, durable, and cost-effective gear solutions for their projects. With their versatility, reliability, and ease of customization, these gears offer endless possibilities for creativity and innovation in various mechanical applications.

Compatible shaft size : 6 mm

No. of Teeth : 38

Material : Plastic

Explore other Variants (3)

Ships within 6 days

Invento 12v 10 Kg-cm 10 RPM Side Shaft High Torque Geared DC Motor, Series - ISC 1600-A

By Invento

Pack of 2 piece

₹1,297 - ₹4,247

The Invento Side Shaft High Torque Geared DC Motor, a powerhouse of precision engineering designed to meet the demands of various applications. With a robust build and superior performance, this motor is engineered to deliver exceptional torque output while maintaining efficiency. At its core, this motor features a high-quality DC motor coupled with precision-engineered gears. The combination of these components ensures smooth operation and precise control over speed and torque. Whether it's powering machinery, robotics, or automation systems, this motor offers reliable performance in demanding environments. One of the standout features of the Invento Side Shaft High Torque Geared DC Motor is its side shaft design. This unique configuration allows for easy integration into a wide range of setups, providing flexibility and convenience in installation. With a focus on durability, this motor is built to withstand rigorous use. Its sturdy construction and high-quality materials ensure longevity and reliability, making it a dependable choice for industrial and commercial applications. Additionally, this motor is designed with efficiency in mind, maximizing power output while minimizing energy consumption. This not only reduces operating costs but also contributes to environmental sustainability.

Type of Product : Side Shaft High Torque Geareded DC Motor

Explore other Variants (3)

Ships within 6 days

Invento Spur Gear Plastic 22 Teeth 60 mm Outer Diameter, ISC 1912 (Pack of: 1Pcs - 10Pcs)

By Invento

Pack of 2 piece

₹577 - ₹3,185

The Invento Spur Gear ISC 1912 is a precision-manufactured mechanical gear designed for efficient and reliable power transmission in parallel shaft systems. Constructed from durable plastic, this spur gear features 22 teeth with a 60 mm outer diameter, making it suitable for mechanical assemblies that require smooth rotational motion and consistent torque transfer. The accurately formed tooth profile ensures stable meshing, reduced friction, and dependable mechanical performance while maintaining a lightweight structure ideal for prototyping and low to moderate load applications. Ideal for use in robotics, automation systems, mechanical models, DIY engineering projects, and educational demonstrations, the ISC 1912 spur gear supports efficient motion transfer between parallel shafts. Its balanced design makes it suitable for gear trains, experimental setups, and custom mechanical systems where precision and durability are important. Available in pack sizes ranging from 1 piece to 10 pieces, this gear is well suited for students, hobbyists, and engineers who require reliable, easy-to-integrate components for prototyping and mechanical system development.

Compatible shaft size : 6 mm

Type of Product : Spur Gear

Outer Diameter : 60 mm

No. of Teeth : 22 Teeth

Explore other Variants (6)

Ships within 6 days

Invento Blue Plastic Spur Gear For DIY Project ISC 1456

By Invento

Set of 2 piece

₹400 - ₹1,533

Introducing the Invento 12 Teeth Bevel Gear, a precision-engineered component designed to facilitate smooth and efficient power transmission in mechanical systems requiring angular motion transfer. This bevel gear is meticulously crafted to provide reliable performance and precise operation in a wide range of applications, from robotics and machinery to DIY projects and educational experiments. The 12 Teeth Bevel Gear features a compact and lightweight design, making it ideal for applications where space is limited or weight is a concern. Despite its small size, this gear is engineered to withstand moderate loads and provide smooth and consistent rotation, ensuring reliable operation in various mechanical systems. Crafted from high-quality materials, the Invento 12 Teeth Bevel Gear offers durability and longevity, even under continuous use and demanding conditions. Its robust construction ensures minimal wear and tear, providing users with confidence in the performance and reliability of their projects. One of the key advantages of the 12 Teeth Bevel Gear is its versatility. This gear can be easily integrated into different mechanical systems and configurations, allowing users to customize and optimize their projects according to their specific requirements. Whether you're building a gearbox, a steering mechanism, or a differential, this gear provides the flexibility needed to achieve desired performance outcomes. Furthermore, the precise engineering of the Invento 12 Teeth Bevel Gear ensures smooth and efficient power transmission, minimizing friction and vibration for enhanced overall system performance. Its accurate tooth profile and meshing ensure minimal backlash and precise motion control, making it suitable for applications where precision is paramount. In summary, the Invento 12 Teeth Bevel Gear is a versatile and reliable component for various mechanical systems and projects. With its compact size, durable construction, and precise operation, this gear empowers users to create innovative and efficient mechanisms for a wide range of applications, driving creativity and innovation in engineering and design.

Color : Blue

Material : Plastic

Shape : Square

Explore other Variants (15)

Ships within 6 days

Invento 6V - 12V 5 Kg-cm 60 rpm DC Metal Geared Motor 65mm x 18mm, Series - ISC 1600-C

By Invento

Pack of 4 piece

₹719 - ₹2,005

The Invento Side Shaft High Torque Geared DC Motor, a powerhouse of precision engineering designed to meet the demands of various applications. With a robust build and superior performance, this motor is engineered to deliver exceptional torque output while maintaining efficiency. At its core, this motor features a high-quality DC motor coupled with precision-engineered gears. The combination of these components ensures smooth operation and precise control over speed and torque. Whether it's powering machinery, robotics, or automation systems, this motor offers reliable performance in demanding environments. One of the standout features of the Invento Side Shaft High Torque Geared DC Motor is its side shaft design. This unique configuration allows for easy integration into a wide range of setups, providing flexibility and convenience in installation. With a focus on durability, this motor is built to withstand rigorous use. Its sturdy construction and high-quality materials ensure longevity and reliability, making it a dependable choice for industrial and commercial applications. Additionally, this motor is designed with efficiency in mind, maximizing power output while minimizing energy consumption. This not only reduces operating costs but also contributes to environmental sustainability.

Type of Product : DC Metal Geared Motor

Speed : 60 RPM

Explore other Variants (3)

Previous Next

Page 1 of 23 results