Have a question? Call us now at +91 9650660070

care@industrybuying.com

Jk-Super-Drive Jobber Drills

Showing 9 out of 9 products

Sort by

JK Super Drive HSS 6 mm (0.24 inch) Jobber Straight Shank Drill, SD7702927 (Pack of 10)

Ships within 3 days

JK Super Drive HSS Jobber Straight Shank Drill (Pack of 10) (Diameter 4.20 to 8 mm)

By JK Super Drive

Pack of 10 piece

₹577 - ₹3,067

You save ₹861!

32.74% OFF

The JK Super Drive HSS Jobber Straight Shank Drill is engineered for accurate drilling performance across metalworking, fabrication, and general workshop applications. Manufactured from high speed steel, these drill bits offer excellent hardness, heat resistance, and wear durability during continuous use. The jobber length design provides a balanced combination of reach and rigidity, supporting precise hole drilling with reduced vibration. The straight shank ensures secure fitting in standard drill chucks, while the sharp cutting edges promote smooth penetration and clean hole finishes in materials such as mild steel, aluminum, plastics, and similar substrates.
This pack of 10 HSS jobber drills is suitable for professional workshops and industrial users who require consistent performance for repeated drilling operations. Each drill bit is designed to maintain cutting efficiency and dimensional accuracy over extended periods of use. The optimized flute design allows effective chip evacuation, helping reduce heat buildup and improve drilling stability. Built for reliability and uniform results, these drills support controlled operation in both manual and machine drilling setups. JK Super Drive HSS Jobber Straight Shank Drills deliver durability, precision, and dependable performance for a wide range of drilling applications.

Series : Jobber

Type of Product : Straight Shank Drill

Material : HSS

Shank Type : Straight

Usage For : Automobile Shops, Manufacturing Plants etc.

Point Angle : 118° & 135°

Finish Type : Chrome

Application : Drilling Holes in Mild Steel, EN-9, Cast Iron, Castings, Plastics, Wood, Stainless Steel

JK Super Drive HSS 5 mm (0.2 inch) Jobber Straight Shank Drill, SD7702751 (Pack of 10)

Ships within 3 days

JK Super Drive HSS Jobber Straight Shank Drill (Pack of 10) (Diameter 2 to 3.97 mm)

By JK Super Drive

Pack of 10 piece

₹235 - ₹1,887

You save ₹193!

9.28% OFF

Series : Jobber

Type of Product : Straight Shank Drill

Material : HSS

Shank Type : Straight

Usage For : Automobile Shops, Manufacturing Plants etc.

Point Angle : 118° & 135°

Finish Type : Chrome

Application : Drilling Holes in Mild Steel, EN-9, Cast Iron, Castings, Plastics, Wood, Stainless Steel

JK Super Drive HSS 10 mm (0.39 inch) Jobber Straight Shank Drill, SD7701745 (Pack of 5)

Ships within 3 days

JK Super Drive HSS Jobber Straight Shank Drill (Pack of 5) (Diameter 8.50 to 13 mm)

By JK Super Drive

Pack of 5 piece

₹1,155 - ₹2,595

You save ₹1,996!

45.83% OFF

The JK Super Drive HSS Jobber Straight Shank Drill is designed for precise and reliable drilling across metalworking, fabrication, and general workshop applications. Manufactured from high speed steel, these drill bits provide excellent hardness, heat resistance, and wear durability during regular use. The jobber length design offers an ideal balance of reach and rigidity, supporting accurate drilling with reduced vibration. The straight shank ensures secure holding in standard drill chucks, while the sharp cutting edges enable smooth penetration and clean hole formation in materials such as mild steel, aluminum, plastics, and similar substrates.
This pack of 5 HSS jobber drills is suitable for workshops and professional users who require consistent performance for repeated drilling tasks. Each drill bit is engineered to maintain cutting efficiency and dimensional accuracy over extended periods of use. The optimized flute design promotes efficient chip removal, helping control heat buildup and enhance drilling stability. Built for dependable operation, these drills support controlled use in both hand-held and machine drilling environments. JK Super Drive HSS Jobber Straight Shank Drills offer durability, precision, and reliable performance for everyday drilling requirements.

Series : Jobber

Type of Product : Straight Shank Drill

Material : HSS

Shank Type : Straight

Usage For : Automobile Shops, Manufacturing Plants etc.

Point Angle : 118° & 135°

Finish Type : Chrome

Application : Drilling Holes in Mild Steel, EN-9, Cast Iron, Castings, Plastics, Wood, Stainless Steel

JK Super Drive HSS 12.7 mm (1/2 inch) Jobber Rolled Forged Drill, SD7701209 (Pack of 5)

Ships within 5 days

JK Super Drive HSS Jobber Rolled Forged Drill Pack of 5 (Diameter 9.52 to 12.7 mm)

By JK Super Drive

Pack of 5 piece

₹1,155 - ₹2,949

You save ₹3,911!

57.01% OFF

The JK Super Drive HSS Jobber Rolled Forged Drill is engineered for dependable drilling performance in metalworking and general workshop applications. Manufactured from high speed steel using a rolled forged process, these drill bits provide enhanced strength, durability, and resistance to wear during regular use. The jobber length design offers a balanced combination of reach and rigidity, enabling accurate drilling with improved stability and reduced vibration. Sharp cutting edges support smooth penetration and clean hole formation, while the straight shank ensures secure compatibility with standard drill chucks. These drills are suitable for materials such as mild steel, aluminum, plastics, and similar substrates.
This pack of 5 HSS jobber rolled forged drills is suitable for workshops and professional users who require consistent and reliable tools for repeated drilling tasks. The precisely formed flutes allow efficient chip evacuation, helping minimize heat buildup and maintain steady drilling conditions. Each drill bit is engineered to retain cutting efficiency and dimensional accuracy over extended use. The robust construction supports controlled operation in both hand-held and machine drilling setups. JK Super Drive HSS Jobber Rolled Forged Drills deliver durability, precision, and dependable performance for everyday drilling and fabrication requirements.

Series : Jobber

Type of Product : Rolled Forged Drill

Material : HSS

Shank Type : Rolled

Usage For : Automobile Shops, Manufacturing Plants etc.

Point Angle : 118° & 135°

Finish Type : Chrome

Application : Drilling Holes in Mild Steel, EN-9, Cast Iron, Castings, Plastics, Wood, Stainless Steel

Diameter Range : 2.70 to 13.0 mm

Related Searches

jk super drive hss jobber drills

hss jobber drills

jk super drive jobber drills hss

JK Super Drive HSS 6.35 mm (1/4 inch) Jobber Rolled Forged Drill, SD7701210 (Pack of 10)

Ships within 3 days

JK Super Drive HSS Jobber Rolled Forged Drill Pack of 10 (Diameter 2.78 to 8 mm)

By JK Super Drive

Pack of 10 piece

₹270 - ₹1,887

You save ₹2,081!

69.37% OFF

The JK Super Drive HSS Jobber Rolled Forged Drill is designed for reliable and precise drilling performance in metalworking and general workshop applications. Manufactured from high speed steel using a rolled forged process, these drill bits offer enhanced strength, durability, and resistance to wear during continuous use. The jobber length design provides an optimal balance between rigidity and reach, supporting accurate drilling with reduced vibration. Sharp cutting edges ensure smooth entry and clean hole formation, while the straight shank allows secure fitting in standard drill chucks. These drills are suitable for use on materials such as mild steel, aluminum, plastics, and other comparable substrates.
This pack of 10 HSS jobber rolled forged drills is ideal for professional workshops and industrial users who require consistent performance for repetitive drilling operations. The precisely formed flutes promote efficient chip evacuation, helping control heat buildup and maintain stable cutting conditions. Each drill is engineered to retain cutting efficiency and dimensional accuracy over extended periods of use. The robust construction supports dependable operation in both hand-held and machine drilling setups. JK Super Drive HSS Jobber Rolled Forged Drills deliver durability, precision, and uniform results for a wide range of drilling and fabrication requirements.

Series : Jobber

Type of Product : Rolled Forged Drill

Material : HSS

Shank Type : Rolled

Usage For : Automobile Shops, Manufacturing Plants etc.

Point Angle : 118° & 135°

Finish Type : Chrome

Application : Drilling Holes in Mild Steel, EN-9, Cast Iron, Castings, Plastics, Wood, Stainless Steel

JK Super Drive HSS 14 mm (0.55 inch) Jobber Straight Shank Drill, SD7702052

Ships within 3 days

JK Super Drive HSS Jobber Straight Shank Drill

By JK Super Drive

₹978 - ₹1,120

You save ₹964!

46.26% OFF

The JK Super Drive HSS Jobber Straight Shank Drill is designed for precise and efficient drilling in metalworking, fabrication, and general workshop applications. Manufactured from high speed steel, this drill bit offers excellent hardness, heat resistance, and wear durability during continuous operation. The jobber length construction provides an optimal balance between strength and reach, allowing accurate drilling with improved stability and reduced vibration. Its straight shank design ensures secure compatibility with standard drill chucks, while the sharp cutting edges support smooth penetration and clean, well-defined holes in materials such as mild steel, aluminum, plastics, and similar substrates.
This HSS jobber drill is engineered to deliver consistent cutting performance and dimensional accuracy over extended use. The precisely formed flutes enable efficient chip evacuation, helping minimize heat buildup and maintain steady drilling conditions. Its balanced geometry supports controlled operation in both hand-held and machine drilling setups, making it suitable for varied workshop environments. Designed for durability and reliability, the drill retains its cutting efficiency through repeated applications. JK Super Drive HSS Jobber Straight Shank Drill provides dependable performance, precision, and long service life for professional drilling and fabrication requirements.

Series : Jobber

Type of Product : Straight Shank Drill

Material : HSS

Shank Type : Straight

Usage For : Automobile Shops, Manufacturing Plants etc.

Point Angle : 118° & 135°

Finish Type : Chrome

Application : Drilling Holes in Mild Steel, EN-9, Cast Iron, Castings, Plastics, Wood, Stainless Steel

Name of Manufacturer/Packer/Importer : JK Files and Engineering limited

JK Super Drive HSS 1 -13 mm (0.04 - 0.51 inch) Jobber Straight Shank Drill (Set of 25)

Ships within 4 days

JK Super Drive HSS 1 -13 mm (0.04 - 0.51 inch) Jobber Straight Shank Drill (Set of 25)

By JK Super Drive

Set of 25 piece

₹4,247 ~~₹11,725~~

You save ₹7,478!

63.78% OFF

The JK Super Drive HSS Jobber Straight Shank Drill Set is a versatile and high-performance solution for diverse drilling requirements. This set includes 25 precision-engineered drills ranging from 1 mm to 13 mm (0.03937 to 0.51181 inches) in diameter, providing comprehensive coverage for various drilling tasks. Made from premium high-speed steel (HSS), these drills ensure excellent durability, heat resistance, and sharpness, delivering efficient results across materials such as metal, wood, and plastic.The jobber length and straight shank design enhance stability and compatibility with standard drill chucks, offering seamless performance in professional and DIY applications. Each drill is precisely sized and labeled for easy identification, making the set practical and organized. Ideal for workshops, construction sites, and home projects, this comprehensive set combines precision, reliability, and convenience, ensuring it's a valuable addition to any toolkit.

JK Super drive Straight Shank Jobber Drill Silver 5/8 Inch (15.75 - 17 mm) Ground Flute HSS Material for Industrial Use, (Pack of 10 Pcs)

Ships within 5 days

JK Super drive Straight Shank Jobber Drill Silver 5/8 Inch (15.75 - 17 mm) Ground Flute HSS Material for Industrial Use, (Pack of 10 Pcs)

By JK Super Drive

Pack of 10 piece

₹24,779

Experience precision and durability with the JK Super drive Straight Shank Jobber Drill Silver 5/8 Inch (Pack of 10), engineered to meet the rigorous demands of industrial drilling. Manufactured using premium HSS (High-Speed Steel), this drill bit offers excellent wear resistance and thermal stability, ensuring smooth, consistent performance even in high-speed applications. With a ground flute design, it efficiently removes chips, reduces friction, and delivers cleaner holes, making it ideal for metal, alloy, and hard plastic drilling operations. Designed with a 5/8 inch (15.75 - 17 mm) diameter, this jobber drill offers versatility and compatibility with a wide range of power tools. The straight shank ensures a secure grip and precise alignment during use, enhancing both control and accuracy. Whether for manufacturing, fabrication, or heavy-duty maintenance, the JK Super drive Straight Shank Jobber Drill is a reliable choice under the trusted banner of JK Super drive. Add this robust tool to your industrial toolkit and achieve consistent, professional-grade results with every drill—built for performance that lasts.

JK Super Drive Ground Flute Jobber Drill Set High Speed Steel 1 to 13 mm, SD7709929 (25 Pcs Set)

Ships within 3 days

JK Super Drive Ground Flute Jobber Drill Set High Speed Steel 1 to 13 mm, SD7709929 (25 Pcs Set)

By JK Super Drive

Set of 25 piece

₹6,017 ~~₹12,375~~

You save ₹6,358!

51.38% OFF

JK Super Drive Ground Flute Jobber Drill Set High Speed Steel 1 to 13 mm, SD7709929 (25 Pcs Set) is crafted to deliver dependable performance for everyday professional and general-use applications. Designed with a clear focus on usability and consistency, this product supports smooth handling and reliable results during regular operation. Its practical build helps users complete tasks efficiently without unnecessary complexity, making it suitable for routine work environments. Built for repeated use, it maintains stable performance over time and aligns well with common usage expectations.Focused on practical value, JK Super Drive Ground Flute Jobber Drill Set High Speed Steel 1 to 13 mm, SD7709929 (25 Pcs Set) contributes to improved workflow and dependable outcomes across different applications. It is ideal for users who prefer straightforward functionality combined with long-term reliability. Whether used frequently or occasionally, this product delivers consistent output and steady performance. A sensible choice for users seeking efficiency, durability, and ease of use based purely on clear product identification.

Page 1 of 1 results

Top Selling Jk-Super-Drive Jobber Drills Products Price List for July 2026

Product Name	Specifications	Expected Price	Dispatch Time	Discount
JK Super Drive HSS 6 mm (0.24 inch) Jobber Straight Shank Drill, SD7702927 (Pack of 10)	Diameter 6 mm \| Finish Type Chrome	₹1,769	3 days	32.74% OFF
JK Super Drive HSS 8 mm (0.32 inch) Jobber Straight Shank Drill, SD7703194 (Pack of 10)	Diameter 8 mm \| Finish Type Chrome	₹3,067	3 days	40.68% OFF
JK Super Drive HSS 12 mm (0.47 inch) Jobber Straight Shank Drill, SD7701932 (Pack of 5)	Diameter 12 mm \| Finish Type Chrome	₹2,359	4 days	62.88% OFF
JK Super Drive HSS 10 mm (0.39 inch) Jobber Straight Shank Drill, SD7701745 (Pack of 5)	Diameter 10 mm \| Finish Type Chrome	₹2,359	3 days	45.83% OFF
JK Super Drive HSS 2.78 mm (7/64 inch) Jobber Straight Shank Drill, SD7703174 (Pack of 10)	Diameter 2.78 mm \| Finish Type Chrome	₹400	3 days	44.44% OFF
JK Super Drive HSS 5 mm (0.2 inch) Jobber Straight Shank Drill, SD7702751 (Pack of 10)	Diameter 5 mm \| Finish Type Chrome	₹1,887	3 days	9.28% OFF