• Home /
• All Brands /
• LHP /
• Motors & Power Transmission /
• Special Purpose Motors

Have a question? Call us now at +91 9650660070

LHP Special Purpose Motors

Showing 23 out of 23 products

Sort by

Recommended New Price : Low to High Price : High to Low

Ships within 5 days

LHP Supremo Series 3 Phase Flameproof Motors IE3 Foot Mounted (B3) 4 Pole 1500 RPM (Power 0.5 to 7.5 HP)

By LHP

₹23,599 - ₹76,699

You save ₹43,980!

49.52% OFF

The LHP Supremo Series 3 Phase Flameproof Motors IE3 Foot Mounted 4 Pole 1500 RPM is engineered for efficient and stable power transmission in industrial environments where flameproof construction is essential. Featuring IE3 efficiency, this three-phase motor combines improved energy performance with a 4-pole configuration designed for operation at 1500 RPM. The foot-mounted arrangement provides a practical foundation for installation on compatible machinery, while the robust construction supports dependable performance during continuous industrial use. As an LHP Flame Proof Motor, it is suitable for applications where efficient operation, controlled rotational speed, mechanical durability, and protection against ignition hazards are important requirements.Designed for machinery requiring balanced medium-speed operation, the LHP Supremo Series 3 Phase Flameproof Motors IE3 Foot Mounted 4 Pole 1500 RPM delivers a combination of premium efficiency and dependable motor performance. Its three-phase configuration enables consistent power delivery, while the 4-pole design provides a suitable 1500 RPM operating speed for compatible industrial equipment. The flameproof construction helps contain internal ignition sources, supporting safer operation in designated hazardous-area applications. With a secure foot-mounted format, this motor can be integrated into suitable drive systems with ease. The LHP Supremo Series offers a robust solution for industrial installations where efficiency, stability, and flameproof protection are key considerations.

Rated Voltage : 415 V ± 10%

Pole : 4 Pole

Phase : 3 Phase

Ambient Temperature : 50 °C

Speed : 1500 RPM

Insulation Class : Class B

IP Rating : IP55

Type of Product : Flameproof Motors

Series : Supremo Series

Altitude : Up to 1000 meters above M.S.L.

Mounting Type : Foot Mounted (B3)

Efficiency Class : IE3

Enclosure Type : TEFC (Totally Enclosed Fan Cooled)

Combined Variations : 0.1

Duty Type : S1 (Continuous Duty)

Test Standard : IEC 60034-2-1:2014-06

Rated Frequency : 50 Hz ± 5%

Start Method : DOL (Direct-On-Line)

Group : Gas group (IIA & IIB)

Area Classification : Zone 1 & Zone 2

Motor Type : Squirrel Cage Induction Motor

Standards Compliance : IS 12615:2018, IS 15999-P1, IEC 60034-1:2010, IS/IEC 60079-1:2014

Explore other Variants (10)

Ships within 30 days

LHP Supremo Series 3 Phase Flameproof Motors IE3 Foot Mounted (B3) 8 Pole 750 RPM (Power 0.5 to 2 HP)

By LHP

₹34,219 - ₹61,359

You save ₹44,475!

50.46% OFF

"The LHP Supremo Series 3 Phase Flameproof Motors IE3 Foot Mounted 8 Pole 750 RPM is engineered for efficient and controlled power transmission in industrial environments where flameproof motor construction is required. Featuring IE3 efficiency, this three-phase motor uses an 8-pole configuration to provide steady operation at 750 RPM, making it suitable for machinery designed for lower rotational speeds. The foot-mounted construction offers a secure installation format for compatible equipment, while the robust design supports reliable performance in demanding industrial conditions. As an LHP motor within the Flame Proof Motors category, it combines improved energy efficiency with stable operation and protection against ignition hazards.
Designed for industrial systems requiring consistent low-speed drive performance, the LHP Supremo Series 3 Phase Flameproof Motors IE3 Foot Mounted 8 Pole 750 RPM delivers a practical balance of efficiency, durability, and flameproof construction. Its three-phase configuration facilitates dependable power delivery, while the 8-pole arrangement maintains the specified 750 RPM operating speed for suitable applications. The flameproof enclosure helps contain internal ignition sources, supporting safer operation in designated hazardous-area installations. The foot-mounted format enables secure positioning and convenient integration with compatible machinery. This LHP Supremo Series motor is suited to applications where controlled rotation, energy-conscious operation, robust construction, and flameproof protection are important requirements."

Rated Voltage : 415 V ± 10%

Pole : 8 Pole

Phase : 3 Phase

Ambient Temperature : 50 °C

Speed : 750 RPM

Insulation Class : Class B

IP Rating : IP55

Type of Product : Flameproof Motors

Series : Supremo Series

Altitude : Up to 1000 meters above M.S.L.

Mounting Type : Foot Mounted (B3)

Efficiency Class : IE3

Enclosure Type : TEFC (Totally Enclosed Fan Cooled)

Combined Variations : 0.1

Duty Type : S1 (Continuous Duty)

Test Standard : IEC 60034-2-1:2014-06

Rated Frequency : 50 Hz ± 5%

Start Method : DOL (Direct-On-Line)

Group : Gas group (IIA & IIB)

Area Classification : Zone 1 & Zone 2

Motor Type : Squirrel Cage Induction Motor

Standards Compliance : IS 12615:2018, IS 15999-P1, IEC 60034-1:2010, IS/IEC 60079-1:2014

Explore other Variants (5)

Ships within 30 days

LHP Supremo Series 3 Phase Flameproof Motors IE3 Foot Mounted (B3) 6 Pole 1000 RPM (Power 0.5 to 4 HP)

By LHP

₹27,139 - ₹68,439

You save ₹68,559!

50.04% OFF

"The LHP Supremo Series 3 Phase Flameproof Motors IE3 Foot Mounted 6 Pole 1000 RPM is engineered for efficient and stable power transmission in industrial environments where flameproof motor construction is required. Featuring IE3 efficiency, this three-phase motor combines improved energy performance with a 6-pole configuration for controlled operation at 1000 RPM. Its foot-mounted design provides a secure installation format for compatible machinery and drive systems, while the robust construction supports dependable performance during demanding industrial duties. As an LHP motor from the Flame Proof Motors category, it is designed for applications where energy efficiency, steady rotation, mechanical strength, and protection against ignition hazards are important considerations.
Designed for industrial equipment requiring measured rotational speed, the LHP Supremo Series 3 Phase Flameproof Motors IE3 Foot Mounted 6 Pole 1000 RPM delivers a practical blend of premium efficiency and sturdy construction. The three-phase configuration enables consistent power transmission, while the 6-pole arrangement provides the specified 1000 RPM speed for suitable machinery. Its flameproof enclosure helps contain internal ignition sources, supporting safer operation in designated hazardous-area applications. The foot-mounted structure facilitates stable positioning and integration with compatible equipment. This LHP Supremo Series motor is suited to industrial systems where controlled speed, efficient operation, durable construction, and flameproof protection are essential performance factors."

Rated Voltage : 415 V ± 10%

Pole : 6 Pole

Phase : 3 Phase

Ambient Temperature : 50 °C

Speed : 1000 RPM

Insulation Class : Class B

IP Rating : IP55

Type of Product : Flameproof Motors

Series : Supremo Series

Altitude : Up to 1000 meters above M.S.L.

Mounting Type : Foot Mounted (B3)

Efficiency Class : IE3

Enclosure Type : TEFC (Totally Enclosed Fan Cooled)

Combined Variations : 0.1

Duty Type : S1 (Continuous Duty)

Test Standard : IEC 60034-2-1:2014-06

Rated Frequency : 50 Hz ± 5%

Start Method : DOL (Direct-On-Line)

Group : Gas group (IIA & IIB)

Area Classification : Zone 1 & Zone 2

Motor Type : Squirrel Cage Induction Motor

Standards Compliance : IS 12615:2018, IS 15999-P1, IEC 60034-1:2010, IS/IEC 60079-1:2014

Explore other Variants (7)

Ships within 30 days

LHP Supremo Series 3 Phase Flameproof Motors IE3 Foot Mounted (B3) 2 Pole 3000 RPM (Power 0.5 to 5.5 HP)

By LHP

₹23,599 - ₹60,179

You save ₹60,370!

50.08% OFF

The LHP Supremo Series 3 Phase Flameproof Motors IE3 Foot Mounted 2 Pole 3000 RPM is designed for efficient and dependable power transmission in industrial environments where flameproof protection is required. Featuring IE3 premium efficiency, this three-phase motor combines energy-conscious operation with a 2-pole configuration for high-speed performance at 3000 RPM. Its foot-mounted construction allows straightforward integration with compatible industrial equipment, while the sturdy design supports reliable operation under demanding working conditions. As a Flame Proof Motor from LHP, it is suited to installations where controlled electrical performance, mechanical strength, and protection against ignition hazards are essential.Engineered for applications requiring high rotational speed and dependable motor operation, the LHP Supremo Series 3 Phase Flameproof Motors IE3 Foot Mounted 2 Pole 3000 RPM brings together premium efficiency and robust construction. The three-phase configuration facilitates steady power delivery, while the flameproof enclosure is designed to help contain internal ignition sources, supporting safer operation in suitable hazardous-area applications. The 2-pole design enables 3000 RPM speed, making it appropriate for machinery requiring rapid and consistent drive performance. With its practical foot-mounted arrangement, this LHP motor provides a reliable solution for industrial systems where efficiency, speed, and flameproof construction are important.

Rated Voltage : 415 V ± 10%

Pole : 2 Pole

Phase : 3 Phase

Ambient Temperature : 50 °C

Speed : 3000 RPM

Insulation Class : Class B

IP Rating : IP55

Type of Product : Flameproof Motors

Series : Supremo Series

Altitude : Up to 1000 meters above M.S.L.

Mounting Type : Foot Mounted (B3)

Efficiency Class : IE3

Enclosure Type : TEFC (Totally Enclosed Fan Cooled)

Combined Variations : 0.1

Duty Type : S1 (Continuous Duty)

Test Standard : IEC 60034-2-1:2014-06

Rated Frequency : 50 Hz ± 5%

Start Method : DOL (Direct-On-Line)

Group : Gas group (IIA & IIB)

Area Classification : Zone 1 & Zone 2

Motor Type : Squirrel Cage Induction Motor

Standards Compliance : IS 12615:2018, IS 15999-P1, IEC 60034-1:2010, IS/IEC 60079-1:2014

Explore other Variants (9)

Related Searches

lhp 3 phase flame proof motors

lhp flame proof motors 3 phase

lhp flame proof motors

3 phase flame proof motors

lhp crane and hoist duty motors

Ships within 30 days

LHP Ultimo Series 3 Phase Flameproof Motors IE4 Foot Mounted (B3) 6 Pole 1000 RPM (Power 0.5 to 3 HP)

By LHP

₹34,219 - ₹71,979

You save ₹73,633!

50.57% OFF

The LHP Ultimo Series 3 Phase Flameproof Motors IE4 Foot Mounted 6 Pole 1000 RPM is designed for energy-efficient and dependable power transmission in industrial environments where flameproof motor construction is essential. Featuring IE4 efficiency, this three-phase motor combines advanced energy performance with a 6-pole configuration for controlled operation at 1000 RPM. The foot-mounted arrangement provides stable support and convenient integration with compatible machinery and drive systems. Its robust construction is suited to demanding industrial applications where steady rotation, mechanical durability, and protection against ignition hazards are important. As an LHP motor within the Flame Proof Motors category, it provides a practical configuration for industrial equipment requiring efficient and controlled motor performance.Built for applications that require lower-speed, consistent drive operation, the LHP Ultimo Series 3 Phase Flameproof Motors IE4 Foot Mounted 6 Pole 1000 RPM brings together premium efficiency, sturdy construction, and flameproof protection. Its three-phase configuration supports stable power delivery, while the 6-pole design provides the specified 1000 RPM operating speed for suitable industrial machinery. The flameproof enclosure helps contain internal ignition sources, supporting safer operation in designated hazardous-area installations. The foot-mounted format enables secure positioning and straightforward equipment integration. This LHP Ultimo Series motor is suitable for industrial systems where energy-conscious operation, controlled speed, robust construction, and flameproof design are key performance requirements.

Rated Voltage : 415 V ± 10%

Pole : 6 Pole

Phase : 3 Phase

Ambient Temperature : 50 °C

Speed : 1000 RPM

Insulation Class : Class B

IP Rating : IP55

Type of Product : Flameproof Motors

Series : Ultimo Series

Altitude : Up to 1000 meters above M.S.L.

Mounting Type : Foot Mounted (B3)

Efficiency Class : IE4

Enclosure Type : TEFC (Totally Enclosed Fan Cooled)

Combined Variations : 0.1

Duty Type : S1 (Continuous Duty)

Test Standard : IS 15999-27 & IEC 60034-2-1:2014-06

Rated Frequency : 50 Hz ± 5%

Start Method : DOL (Direct-On-Line)

Group : Gas group (IIA & IIB)

Area Classification : Zone 1 & Zone 2

Explore other Variants (6)

Ships within 30 days

LHP Ultimo Series 3 Phase Flameproof Motors IE4 Foot Mounted (B3) 4 Pole 1500 RPM (Power 0.5 to 5.5 HP)

By LHP

₹29,499 - ₹73,159

You save ₹73,338!

50.06% OFF

The LHP Ultimo Series 3 Phase Flameproof Motors IE4 Foot Mounted 4 Pole 1500 RPM is engineered for energy-efficient and dependable power transmission in industrial environments requiring flameproof motor construction. Featuring IE4 efficiency, this three-phase motor is designed to deliver improved electrical efficiency while maintaining a steady operating speed of 1500 RPM through its 4-pole configuration. The foot-mounted arrangement provides stable support and facilitates integration with compatible industrial machinery. Its robust construction is suited to demanding applications where consistent performance, controlled rotation, and protection against ignition hazards are essential. As part of the Flame Proof Motors category, this LHP Ultimo Series motor combines advanced efficiency with a practical industrial configuration.Built for applications requiring balanced speed and efficient drive performance, the LHP Ultimo Series 3 Phase Flameproof Motors IE4 Foot Mounted 4 Pole 1500 RPM offers a combination of premium efficiency, sturdy construction, and flameproof protection. The three-phase design supports consistent power transmission, while the 4-pole arrangement provides a suitable 1500 RPM operating speed for compatible equipment. Its flameproof enclosure helps contain internal ignition sources, supporting safer operation in designated hazardous-area installations. The foot-mounted format enables secure positioning on suitable machinery and drive systems. This LHP motor is designed for industrial setups where energy-conscious operation, mechanical reliability, stable rotation, and flameproof construction are important considerations.

Rated Voltage : 415 V ± 10%

Pole : 4 Pole

Phase : 3 Phase

Ambient Temperature : 50 °C

Speed : 1500 RPM

Insulation Class : Class B

IP Rating : IP55

Type of Product : Flameproof Motors

Series : Ultimo Series

Altitude : Up to 1000 meters above M.S.L.

Mounting Type : Foot Mounted (B3)

Efficiency Class : IE4

Enclosure Type : TEFC (Totally Enclosed Fan Cooled)

Combined Variations : 0.1

Duty Type : S1 (Continuous Duty)

Test Standard : IS 15999-27 & IEC 60034-2-1:2014-06

Rated Frequency : 50 Hz ± 5%

Start Method : DOL (Direct-On-Line)

Group : Gas group (IIA & IIB)

Area Classification : Zone 1 & Zone 2

Explore other Variants (8)

Ships within 30 days

LHP Ultimo Series 3 Phase Flameproof Motors IE4 Foot Mounted (B3) 2 Pole 3000 RPM (Power 0.5 to 5.5 HP)

By LHP

₹28,319 - ₹75,519

You save ₹76,312!

50.26% OFF

The LHP Ultimo Series 3 Phase Flameproof Motors IE4 Foot Mounted 2 Pole 3000 RPM is developed for high-efficiency power transmission in industrial environments where flameproof motor construction is essential. Featuring IE4 efficiency, this three-phase motor is designed to support reduced energy consumption while maintaining high-speed operation through its 2-pole configuration at 3000 RPM. The foot-mounted arrangement facilitates secure installation with compatible machinery and drive systems. Its robust construction is suited to demanding industrial applications where dependable performance, efficient operation, and protection against ignition hazards are important. As an LHP Flame Proof Motor, it combines advanced efficiency with a practical configuration for industrial drive requirements.Designed for applications demanding efficient high-speed motor operation, the LHP Ultimo Series 3 Phase Flameproof Motors IE4 Foot Mounted 2 Pole 3000 RPM integrates premium efficiency with a sturdy flameproof design. The three-phase configuration provides consistent electrical power delivery, while the 2-pole setup supports a rated speed of 3000 RPM for suitable high-speed machinery. Its flameproof construction helps contain internal ignition sources, making it appropriate for specified hazardous-area installations. The foot-mounted format offers convenient equipment integration and stable mounting. This LHP Ultimo Series motor is a suitable choice for industrial systems requiring a combination of IE4 efficiency, rapid rotation, durable construction, and flameproof protection.

Rated Voltage : 415 V ± 10%

Pole : 2 Pole

Phase : 3 Phase

Ambient Temperature : 50 °C

Speed : 3000 RPM

Insulation Class : Class B

IP Rating : IP55

Type of Product : Flameproof Motors

Series : Ultimo Series

Altitude : Up to 1000 meters above M.S.L.

Mounting Type : Foot Mounted (B3)

Efficiency Class : IE4

Enclosure Type : TEFC (Totally Enclosed Fan Cooled)

Combined Variations : 0.1

Duty Type : S1 (Continuous Duty)

Test Standard : IS 15999-27 & IEC 60034-2-1:2014-06

Rated Frequency : 50 Hz ± 5%

Start Method : DOL (Direct-On-Line)

Group : Gas group (IIA & IIB)

Area Classification : Zone 1 & Zone 2

Explore other Variants (8)

Ships within 30 days

LHP 3 Phase Flameproof Motors IE2 Foot Mounted (B3) 8 Pole 750 RPM (Power 0.5 to 3 HP)

By LHP

₹30,679 - ₹74,339

You save ₹75,568!

50.41% OFF

"The LHP 3 Phase Flameproof Motors IE2 Foot Mounted 8 Pole 750 RPM is designed for dependable power transmission in industrial environments where flameproof motor construction is essential. Featuring IE2 efficiency, this three-phase motor incorporates an 8-pole configuration for controlled, low-speed operation at 750 RPM. The foot-mounted arrangement provides stable support and convenient integration with compatible machinery and drive systems. Its robust construction is suited to demanding industrial applications where smooth rotation, reliable electrical performance, and protection against ignition hazards are important. As an LHP motor in the Flame Proof Motors category, it offers a practical configuration for equipment requiring steady and controlled drive performance.
Built for applications that benefit from measured rotational movement, the LHP 3 Phase Flameproof Motors IE2 Foot Mounted 8 Pole 750 RPM combines a sturdy design with consistent three-phase operation. The 8-pole configuration delivers the specified 750 RPM speed, making it suitable for compatible industrial machinery requiring lower-speed motor operation. Its flameproof enclosure helps contain internal ignition sources, supporting safer use in designated hazardous-area environments. The foot-mounted format enables secure positioning and straightforward installation on suitable equipment. This LHP Flame Proof Motor provides a balanced solution for industrial systems where controlled speed, durable construction, dependable power delivery, and flameproof protection are essential considerations."

Rated Voltage : 415 V ± 10%

Pole : 8 Pole

Phase : 3 Phase

Ambient Temperature : 50 °C

Speed : 750 RPM

Insulation Class : Class B

IP Rating : IP55

Type of Product : Flameproof Motors

Altitude : Up to 1000 meters above M.S.L.

Mounting Type : Foot Mounted (B3)

Efficiency Class : IE2

Enclosure Type : TEFC (Totally Enclosed Fan Cooled)

Combined Variations : 0.1

Duty Type : S1 (Continuous Duty)

Test Standard : IS 15999-27 & IEC 60034-2-1:2014-06

Rated Frequency : 50 Hz ± 5%

Start Method : DOL (Direct-On-Line)

Group : Gas group (IIA & IIB)

Area Classification : Zone 1 & Zone 2

Motor Type : Squirrel Cage Induction Motor

Applicable Standard : IS 12615:2018, IS 15999-P1, IEC 60034-1:2010, IS/IEC 60079-1:2014

Explore other Variants (6)

Ships within 30 days

LHP 3 Phase Flameproof Motors IE2 Foot Mounted (B3) 6 Pole 1000 RPM (Power 0.5 to 5 HP)

By LHP

₹25,959 - ₹74,339

You save ₹74,247!

49.97% OFF

"The LHP 3 Phase Flameproof Motors IE2 Foot Mounted 6 Pole 1000 RPM is designed for dependable power transmission in industrial environments where flameproof motor construction is essential. With IE2 efficiency and a 6-pole configuration, this three-phase motor operates at 1000 RPM, making it suitable for equipment requiring controlled, lower-speed rotation. The foot-mounted arrangement provides a stable installation format for compatible machinery and drive assemblies, while the sturdy construction supports consistent operation in demanding industrial conditions. As an LHP motor within the Flame Proof Motors category, it combines practical installation, steady rotational performance, and protection against ignition hazards for suitable industrial applications.
Engineered for applications where smooth and measured motor operation is required, the LHP 3 Phase Flameproof Motors IE2 Foot Mounted 6 Pole 1000 RPM offers a balanced combination of electrical performance and robust construction. Its three-phase configuration supports consistent power delivery, while the 6-pole design provides the specified 1000 RPM operating speed for compatible industrial equipment. The flameproof enclosure helps contain internal ignition sources, supporting safer operation in designated hazardous-area environments. The foot-mounted structure enables secure positioning and convenient equipment integration. This LHP Flame Proof Motor is suited to industrial systems where controlled speed, dependable drive performance, and flameproof construction are important operational requirements."

Rated Voltage : 415 V ± 10%

Pole : 6 Pole

Phase : 3 Phase

Ambient Temperature : 50 °C

Speed : 1000 RPM

Insulation Class : Class B

IP Rating : IP55

Type of Product : Flameproof Motors

Altitude : Up to 1000 meters above M.S.L.

Mounting Type : Foot Mounted (B3)

Efficiency Class : IE2

Enclosure Type : TEFC (Totally Enclosed Fan Cooled)

Combined Variations : 0.1

Name of Manufacturer/Packer/Importer : Gurusabh Power

Duty Type : S1 (Continuous Duty)

Test Standard : IS 15999-27 & IEC 60034-2-1:2014-06

Rated Frequency : 50 Hz ± 5%

Start Method : DOL (Direct-On-Line)

Group : Gas group (IIA & IIB)

Area Classification : Zone 1 & Zone 2

Motor Type : Squirrel Cage Induction Motor

Applicable Standard : IS 12615:2018, IS 15999-P1, IEC 60034-1:2010, IS/IEC 60079-1:2014

Explore other Variants (8)

Ships within 30 days

LHP 3 Phase Flameproof Motors IE2 Foot Mounted (B3) 4 Pole 1500 RPM (Power 0.25 to 7.5 HP)

By LHP

₹16,519 - ₹73,159

You save ₹73,657!

50.17% OFF

"The LHP 3 Phase Flameproof Motors IE2 Foot Mounted 4 Pole 1500 RPM is designed for steady power transmission in industrial environments where flameproof motor construction is required. With IE2 efficiency and a 4-pole configuration, this three-phase motor delivers controlled operation at 1500 RPM, making it suitable for equipment that requires dependable medium-speed rotation. The foot-mounted design supports secure positioning and straightforward integration with compatible machinery and drive assemblies. Its robust construction is intended for demanding industrial applications where reliable electrical performance and protection against ignition hazards are important. As an LHP Flame Proof Motor, it offers a practical combination of operational stability, suitable rotational speed, and flameproof design for specified industrial installations.
Built around a balanced 4-pole configuration, the LHP 3 Phase Flameproof Motors IE2 Foot Mounted 4 Pole 1500 RPM provides consistent motor performance for applications requiring reliable and controlled drive operation. The three-phase design facilitates stable power delivery, while the flameproof enclosure helps contain internal ignition sources, supporting safer use in appropriate hazardous-area environments. Its 1500 RPM operating speed is well suited to machinery where moderate rotational movement is preferred, and the foot-mounted format enables convenient equipment installation. This LHP motor combines sturdy construction, IE2 efficiency, and dependable speed characteristics for industrial systems requiring a durable flameproof motor solution."

Rated Voltage : 415 V ± 10%

Pole : 4 Pole

Phase : 3 Phase

Ambient Temperature : 50 °C

Speed : 1500 RPM

Insulation Class : Class B

IP Rating : IP55

Type of Product : Flameproof Motors

Altitude : Up to 1000 meters above M.S.L.

Mounting Type : Foot Mounted (B3)

Efficiency Class : IE2

Enclosure Type : TEFC (Totally Enclosed Fan Cooled)

Combined Variations : 0.1

Duty Type : S1 (Continuous Duty)

Test Standard : IS 15999-27 & IEC 60034-2-1:2014-06

Rated Frequency : 50 Hz ± 5%

Start Method : DOL (Direct-On-Line)

Group : Gas group (IIA & IIB)

Area Classification : Zone 1 & Zone 2

Motor Type : Squirrel Cage Induction Motor

Applicable Standard : IS 12615:2018, IS 15999-P1, IEC 60034-1:2010, IS/IEC 60079-1:2014

Explore other Variants (13)

Ships within 30 days

LHP 3 Phase Flameproof Motors IE2 Foot Mounted (B3) 2 Pole 3000 RPM (Power 0.25 to 7.5 HP)

By LHP

₹16,519 - ₹76,699

You save ₹76,949!

50.08% OFF

The LHP 3 Phase Flameproof Motors IE2 Foot Mounted 2 Pole 3000 RPM is engineered for dependable power transmission in industrial environments where protection against ignition hazards is essential. Designed as a three-phase flameproof motor, it combines IE2 efficiency with a 2-pole configuration to deliver high-speed operation at 3000 RPM. The foot-mounted construction supports convenient installation on compatible machinery and equipment, while the robust motor design is suited for demanding industrial duty. As part of the Flame Proof Motors category, this LHP motor is appropriate for applications requiring reliable electrical performance and enhanced operational safety in potentially hazardous areas.Built for consistent industrial performance, the LHP 3 Phase Flameproof Motors IE2 Foot Mounted 2 Pole 3000 RPM offers a practical combination of efficiency, speed, and rugged construction. Its three-phase configuration enables stable motor operation, while the flameproof design helps contain internal ignition sources, supporting safer use in environments where combustible gases or vapours may be present. The 2-pole arrangement provides the required high rotational speed for suitable industrial machinery, and the foot-mounted format simplifies equipment integration. This LHP Flame Proof Motor is well suited for industrial installations where dependable drive performance, efficient operation, and protective motor construction are important considerations.

Rated Voltage : 415 V ± 10%

Pole : 2 Pole

Phase : 3 Phase

Ambient Temperature : 50 °C

Speed : 3000 RPM

Insulation Class : Class B

IP Rating : IP55

Type of Product : Flameproof Motors

Altitude : Up to 1000 meters above M.S.L.

Mounting Type : Foot Mounted (B3)

Efficiency Class : IE2

Enclosure Type : TEFC (Totally Enclosed Fan Cooled)

Combined Variations : 0.1

Duty Type : S1 (Continuous Duty)

Test Standard : IS 15999-27 & IEC 60034-2-1:2014-06

Rated Frequency : 50 Hz ± 5%

Start Method : DOL (Direct-On-Line)

Group : Gas group (IIA & IIB)

Area Classification : Zone 1 & Zone 2

Motor Type : Squirrel Cage Induction Motor

Applicable Standard : IS 12615:2018, IS 15999-P1, IEC 60034-1:2010, IS/IEC 60079-1:2014

Explore other Variants (13)

Ships within 30 days

LHP Crane & Hoist Duty SC Induction Motors Foot Mounted (B3) 3 Phase 8 Pole 750 RPM (Power 0.5 to 5 HP)

By LHP

₹20,059 - ₹50,739

You save ₹56,358!

52.62% OFF

LHP Crane & Hoist Duty SC Induction Motors Foot Mounted (B3) 3 Phase 8 Pole 750 RPM is designed for lifting and material-handling applications that require dependable motor performance at a controlled operating speed. This three-phase squirrel cage induction motor features an 8-pole configuration with a rated speed of 750 RPM, making it suitable for crane, hoist, winch, and similar industrial equipment where steady and reliable drive operation is essential. Its foot-mounted B3 construction supports convenient installation on compatible machine bases while allowing practical alignment with the driven system.Built for the demanding requirements of Crane and Hoist Duty Motors, LHP Crane & Hoist Duty SC Induction Motors Foot Mounted (B3) 3 Phase 8 Pole 750 RPM provides a robust solution for industrial motion and load-handling systems. The squirrel cage design offers a straightforward motor configuration with dependable electrical operation and reduced mechanical complexity. Its three-phase arrangement enables consistent power transmission, while the 750 RPM operating speed is well suited to applications requiring controlled movement. This LHP motor is an appropriate choice for cranes, hoists, and other heavy-duty machinery where a stable and practical drive solution is required.

Motor Type : Squirrel Cage Induction Motor

Pole : 8 Pole

Insulation Class : Class F

Ambient Temperature : 50 °C

Combined Variations : 0.1

Phase : 3 Phase

Type of Product : Crane & Hoist Duty SC Induction Motors

Rated Voltage : 415 V ± 10%

Application : VFD Compatible (Variable Frequency Drive)

Enclosure Type : TEFC (Totally Enclosed Fan Cooled)

Mounting Type : Foot Mounted (B3)

Speed : 750 RPM

Duty Type : S3 / S4

IP Rating : IP55

Altitude : Up to 1000 meters above M.S.L.

Rated Frequency : 50 Hz ± 5%

Explore other Variants (7)

Ships within 30 days

LHP Crane & Hoist Duty SC Induction Motors VFD Foot Mounted (B3) 3 Phase 6 Pole 1000 RPM (Power 0.5 to 12.5 HP)

By LHP

₹17,699 - ₹93,219

You save ₹102,720!

52.42% OFF

LHP Crane & Hoist Duty SC Induction Motors VFD Foot Mounted (B3) 3 Phase 6 Pole 1000 RPM is developed for crane, hoist, and material-handling equipment that requires controlled movement and dependable rotational performance. This 3 phase squirrel cage induction motor features a 6 pole configuration and 1000 RPM speed, providing characteristics suited to applications where lower-speed operation and steady torque delivery are important. Its foot-mounted B3 construction facilitates firm installation on suitable machine bases, while the squirrel cage arrangement offers a practical design for demanding industrial working conditions.The LHP Crane & Hoist Duty SC Induction Motors VFD Foot Mounted (B3) 3 Phase 6 Pole 1000 RPM is compatible with variable frequency drive-based systems, allowing operating speed to be adjusted according to equipment requirements. Its application-oriented configuration makes it suitable for cranes, hoists, lifting machinery, winches, and industrial material-handling systems. Falling under the Crane and Hoist Duty Motors category, this LHP motor combines a 6 pole, 1000 RPM configuration with VFD suitability and B3 foot mounting for applications that demand controlled and consistent motor operation.

Motor Type : Squirrel Cage Induction Motor

Pole : 6 Pole

Insulation Class : Class F

Ambient Temperature : 50 °C

Combined Variations : 0.1

Phase : 3 Phase

Type of Product : Crane & Hoist Duty SC Induction Motors VFD

Rated Voltage : 415 V ± 10%

Application : VFD Compatible (Variable Frequency Drive)

Enclosure Type : TEFC (Totally Enclosed Fan Cooled)

Mounting Type : Foot Mounted (B3)

Speed : 1000 RPM

Duty Type : S3 / S4

IP Rating : IP55

Altitude : Up to 1000 meters above M.S.L.

Rated Frequency : 50 Hz ± 5%

Explore other Variants (10)

Ships within 30 days

LHP Crane & Hoist Duty SC Induction Motors VFD Foot Mounted (B3) 3 Phase 4 Pole 1500 RPM (Power 0.33 to 12.5 HP)

By LHP

₹15,339 - ₹61,359

You save ₹66,034!

51.83% OFF

LHP Crane & Hoist Duty SC Induction Motors VFD Foot Mounted (B3) 3 Phase 4 Pole 1500 RPM is engineered for lifting, positioning, and material-handling applications where dependable motor performance and controlled operation are essential. Designed as a 3 phase squirrel cage induction motor, it features a 4 pole configuration with a rated speed of 1500 RPM, making it suitable for crane and hoist systems requiring steady rotational performance. The foot-mounted B3 construction supports secure installation on compatible machine bases, while the squirrel cage design offers a practical solution for demanding industrial duty cycles.The LHP Crane & Hoist Duty SC Induction Motors VFD Foot Mounted (B3) 3 Phase 4 Pole 1500 RPM is designed for use with variable frequency drives, enabling flexible speed regulation according to application requirements. Its configuration makes it suitable for industrial cranes, hoists, winches, lifting equipment, and other material-handling machinery where controlled acceleration and operating speed are important. As part of the Crane and Hoist Duty Motors category, this LHP motor combines application-focused construction with reliable induction motor technology for consistent operation across demanding industrial environments.

Motor Type : Squirrel Cage Induction Motor

Pole : 4 Pole

Insulation Class : Class F

Ambient Temperature : 50 °C

Combined Variations : 0.1

Phase : 3 Phase

Type of Product : Crane & Hoist Duty SC Induction Motors VFD

Rated Voltage : 415 V ± 10%

Application : VFD Compatible (Variable Frequency Drive)

Enclosure Type : TEFC (Totally Enclosed Fan Cooled)

Mounting Type : Foot Mounted (B3)

Speed : 1500 RPM

Duty Type : S3 / S4

IP Rating : IP55

Altitude : Up to 1000 meters above M.S.L.

Rated Frequency : 50 Hz ± 5%

Explore other Variants (11)

Ships within 30 days

LHP Crane & Hoist Duty SC Induction Motors DOL Foot Mounted (B3) 3 Phase 6 Pole 1000 RPM (Power 0.5 to 12.5 HP)

By LHP

₹16,519 - ₹88,499

You save ₹98,106!

52.57% OFF

LHP Crane & Hoist Duty SC Induction Motors DOL Foot Mounted (B3) 3 Phase 6 Pole 1000 RPM is engineered for industrial lifting and material-handling systems that require controlled, dependable motor performance. This three-phase squirrel cage induction motor features a 6-pole configuration and 1000 RPM rated speed, providing a balanced operating profile for crane, hoist, trolley, winch, and associated machinery. The DOL starting arrangement enables direct connection to the electrical supply, while the B3 foot-mounted construction facilitates secure installation on suitable equipment foundations and supports practical coupling with the driven mechanism.Suitable for the requirements of Crane and Hoist Duty Motors, LHP Crane & Hoist Duty SC Induction Motors DOL Foot Mounted (B3) 3 Phase 6 Pole 1000 RPM offers a practical combination of squirrel cage construction, three-phase operation, and moderate rotational speed. The 6-pole design is appropriate for applications where smooth and controlled movement is important during material handling. Its direct-on-line starting configuration simplifies motor starting, while the foot mounting provides a conventional installation format for compatible industrial equipment. This LHP motor is suited to crane and hoist applications where reliable drive operation and a robust mounting arrangement are required.

Motor Type : Squirrel Cage Induction Motor

Pole : 6 Pole

Insulation Class : Class F

Ambient Temperature : 50 °C

Combined Variations : 0.1

Phase : 3 Phase

Type of Product : Crane & Hoist Duty SC Induction Motors DOL

Rated Voltage : 415 V ± 10%

Enclosure Type : TEFC (Totally Enclosed Fan Cooled)

Mounting Type : Foot Mounted (B3)

Speed : 1000 RPM

Duty Type : S3 / S4

IP Rating : IP55

Altitude : Up to 1000 meters above M.S.L.

Rated Frequency : 50 Hz ± 5%

Start Method : DOL (Direct-On-Line)

Explore other Variants (10)

Ships within 30 days

LHP Crane & Hoist Duty SC Induction Motors DOL Foot Mounted (B3) 3 Phase 4 Pole 1500 RPM (Power 0.33 to 17.6 HP)

By LHP

₹14,159 - ₹87,319

You save ₹96,690!

52.55% OFF

LHP Crane & Hoist Duty SC Induction Motors DOL Foot Mounted (B3) 3 Phase 4 Pole 1500 RPM is developed for industrial lifting and material-handling equipment requiring responsive and dependable motor operation. This three-phase squirrel cage induction motor incorporates a 4-pole design with a 1500 RPM rated speed, making it suitable for crane, hoist, trolley, winch, and related machinery where efficient rotational performance is required. The DOL starting arrangement provides direct connection to the power supply, while the B3 foot-mounted construction allows secure installation on compatible equipment bases and supports straightforward drive alignment.Designed for the specific demands of Crane and Hoist Duty Motors, LHP Crane & Hoist Duty SC Induction Motors DOL Foot Mounted (B3) 3 Phase 4 Pole 1500 RPM combines a practical squirrel cage configuration with a sturdy mounting format for industrial applications. Its three-phase design supports consistent power delivery, while the 4-pole, 1500 RPM configuration is suited to equipment requiring a comparatively higher operating speed. The motor can be used in crane and hoist systems where dependable rotation, direct-on-line starting, and secure foot mounting are important for day-to-day material movement operations.

Motor Type : Squirrel Cage Induction Motor

Pole : 4 Pole

Insulation Class : Class F

Ambient Temperature : 50 °C

Combined Variations : 0.1

Phase : 3 Phase

Rated Voltage : 415 V ± 10%

Enclosure Type : TEFC (Totally Enclosed Fan Cooled)

Mounting Type : Foot Mounted (B3)

Speed : 1500 RPM

Duty Type : S3 / S4

IP Rating : IP55

Altitude : Up to 1000 meters above M.S.L.

Rated Frequency : 50 Hz ± 5%

Start Method : DOL (Direct-On-Line)

Explore other Variants (13)

Ships within 30 days

LHP Cooling Tower Motors IE2 Flange Mounted (B5) 3 Phase 132S Frame 8 Pole 2 HP

By LHP

₹34,219   ₹70,603

You save ₹36,384!

51.53% OFF

The LHP Cooling Tower Motors IE2 Flange Mounted (B5) 3 Phase 132S Frame 8 Pole 2 HP is an advanced engineering solution from LHP, crafted to deliver exceptional performance, long operational life, and superior energy efficiency. Designed with precision and built using high‑grade materials, this motor ensures stable power output, reduced heat generation, and maximum operational reliability. It is ideal for demanding industrial applications where consistent speed, low vibration, and enhanced durability are essential. The robust construction and innovative technology make it a trusted choice for manufacturing units, processing plants, and automation systems. As part of the High-Efficiency Industrial Motors category, the LHP Cooling Tower Motors IE2 Flange Mounted (B5) 3 Phase 132S Frame 8 Pole 2 HP reflects LHP’s commitment to producing world‑class motors that support productivity and operational safety. Its efficient design minimizes maintenance requirements while ensuring smooth performance in continuous-duty environments. This motor is an excellent choice for industries seeking reliable power delivery, long-term efficiency, and superior engineering quality.

Add to Cart Buy Now

Ships within 30 days

LHP Cooling Tower Motors IE3 Flange Mounted (B5) 6 Pole 1000 RPM Power(1.5 to 3 HP)

By LHP

₹29,499 - ₹44,839

You save ₹49,502!

52.47% OFF

LHP Cooling Tower Motors IE3 Flange Mounted (B5) 6 Pole 1000 RPM is designed for cooling tower installations that require efficient operation, controlled speed, and dependable mechanical integration. Included in the Energy Efficient Motors category, this LHP motor combines IE3 efficiency with a 6-pole configuration rated at 1000 RPM. Its B5 flange-mounted construction provides a secure mounting interface for compatible cooling tower assemblies, supporting proper alignment and stable connection with driven equipment. The 1000 RPM operating speed makes this motor suitable for cooling tower fan applications where measured rotation, consistent airflow, and practical energy utilization are important.The LHP Cooling Tower Motors IE3 Flange Mounted (B5) 6 Pole 1000 RPM brings together premium efficiency and application-specific construction for cooling tower systems. Its 6-pole design provides steady 1000 RPM operation, making it appropriate for equipment requiring controlled rotational performance rather than high-speed output. The B5 flange arrangement allows direct installation with compatible assemblies while maintaining a firm mechanical interface. With IE3 efficiency, this LHP motor is suited to cooling tower applications involving regular operating cycles and demanding efficient power usage, stable speed, secure mounting, and consistent mechanical performance.

Pole : 6 Pole

Phase : 3 Phase

IP Rating : IP55

Type of Product : Cooling Tower Motors

Speed : 1000 RPM

Insulation Class : Class F

Mounting Type : Flange Mounted (B5)

Rated Voltage : 415 V ± 10%

Efficiency Class : IE3

Ambient Temperature : 50 °C

Duty Type : S1 (Continuous Duty)

Altitude : Up to 1000 meters above M.S.L.

Motor Type : Air Over Motor (AOM) Squirrel Cage Induction Motor

Rated Frequency : 50 Hz ± 5%

Combined Variations : ±10%

Explore other Variants (3)

Ships within 30 days

LHP Cooling Tower Motors IE2 Flange Mounted (B5) 6 Pole 1000 RPM Power(1.5 to 3 HP)

By LHP

₹25,959 - ₹38,939

You save ₹43,071!

52.52% OFF

LHP Cooling Tower Motors IE2 Flange Mounted (B5) 6 Pole 1000 RPM is designed for cooling tower systems requiring steady operation, suitable torque characteristics, and efficient power utilization. Part of the Energy Efficient Motors category, this LHP motor incorporates IE2 efficiency with a 6-pole configuration rated at 1000 RPM. The B5 flange-mounted design provides a secure and practical interface for compatible cooling tower equipment, supporting proper mechanical integration and stable operation. Its lower operating speed is well suited to cooling tower fan applications where controlled rotation and dependable airflow are important for regular system performance.The LHP Cooling Tower Motors IE2 Flange Mounted (B5) 6 Pole 1000 RPM offers a purpose-focused combination of motor efficiency, speed, and mounting compatibility for cooling tower installations. The 6-pole configuration provides 1000 RPM operation, making it appropriate for applications requiring measured rotational performance rather than high-speed output. Its B5 flange arrangement facilitates direct mounting with compatible assemblies while maintaining a firm mechanical connection. With IE2 efficiency, this LHP motor is suited for cooling tower systems operating on regular duty cycles and requiring dependable rotation, practical energy consumption, stable equipment integration, and consistent mechanical performance.

Pole : 6 Pole

Phase : 3 Phase

IP Rating : IP55

Type of Product : Cooling Tower Motors

Speed : 1000 RPM

Insulation Class : Class F

Mounting Type : Flange Mounted (B5)

Rated Voltage : 415 V ± 10%

Efficiency Class : IE2

Ambient Temperature : 50 °C

Duty Type : S1 (Continuous Duty)

Altitude : Up to 1000 meters above M.S.L.

Motor Type : Air Over Motor (AOM) Squirrel Cage Induction Motor

Rated Frequency : 50 Hz ± 5%

Combined Variations : ±10%

Explore other Variants (3)

Ships within 30 days

LHP Cooling Tower Motors IE3 Flange Mounted (B5) 4 Pole 1500 RPM Power(1 to 7.5 HP)

By LHP

₹18,879 - ₹57,819

You save ₹62,659!

52.01% OFF

LHP Cooling Tower Motors IE3 Flange Mounted (B5) 4 Pole 1500 RPM is developed for cooling tower applications that demand efficient power utilization, steady rotation, and dependable equipment integration. Included in the Energy Efficient Motors category, this LHP motor features IE3 efficiency and a 4-pole configuration designed to operate at 1500 RPM. The B5 flange-mounted arrangement provides a practical mounting interface for compatible cooling tower assemblies, supporting secure alignment between the motor and driven equipment. Its moderate operating speed makes the motor suitable for cooling tower fan systems where consistent airflow and controlled rotational performance are important.The LHP Cooling Tower Motors IE3 Flange Mounted (B5) 4 Pole 1500 RPM combines an energy-efficient motor design with a purpose-oriented configuration for cooling tower equipment. The IE3 efficiency class supports reduced electrical losses during operation, making it suitable for applications with regular or extended running cycles. Its 4-pole construction provides a 1500 RPM operating speed, while the B5 flange mounting enables direct integration with compatible assemblies. Designed specifically for cooling tower use, this LHP motor offers a balanced solution for applications requiring efficient operation, stable speed, secure mounting, and reliable mechanical performance.

Pole : 4 Pole

Phase : 3 Phase

IP Rating : IP55

Type of Product : Cooling Tower Motors

Speed : 1500 RPM

Insulation Class : Class F

Mounting Type : Flange Mounted (B5)

Rated Voltage : 415 V ± 10%

Efficiency Class : IE3

Ambient Temperature : 50 °C

Duty Type : S1 (Continuous Duty)

Altitude : Up to 1000 meters above M.S.L.

Motor Type : Air Over Motor (AOM) Squirrel Cage Induction Motor

Rated Frequency : 50 Hz ± 5%

Combined Variations : ±10%

Explore other Variants (6)

Ships within 30 days

LHP Cooling Tower Motors IE2 Flange Mounted (B5) 4 Pole 1500 RPM Power(1 to 7.5 HP)

By LHP

₹16,519 - ₹50,739

You save ₹53,998!

51.56% OFF

LHP Cooling Tower Motors IE2 Flange Mounted (B5) 4 Pole 1500 RPM is designed for cooling tower applications that require balanced speed, efficient operation, and dependable mechanical integration. Positioned within the Energy Efficient Motors category, this LHP motor combines IE2 efficiency with a 4-pole configuration delivering 1500 RPM. Its B5 flange-mounted construction enables secure coupling with compatible cooling tower assemblies, making it suitable for installations where accurate mounting and stable operation are essential. The motor’s configuration is well suited for cooling tower fan systems requiring consistent rotational output and practical energy utilization during regular operation.The LHP Cooling Tower Motors IE2 Flange Mounted (B5) 4 Pole 1500 RPM provides a practical combination of energy-conscious performance and application-specific design for cooling tower equipment. The 4-pole arrangement offers a moderate operating speed of 1500 RPM, supporting smooth and steady fan operation in compatible systems. Its B5 flange configuration facilitates direct installation while helping maintain a firm mechanical connection between the motor and driven equipment. With IE2 efficiency, this LHP motor is suitable for cooling tower setups where dependable performance, efficient power usage, appropriate speed, and secure flange mounting are important operating requirements.

Pole : 4 Pole

Phase : 3 Phase

IP Rating : IP55

Type of Product : Cooling Tower Motors

Speed : 1500 RPM

Insulation Class : Class F

Mounting Type : Flange Mounted (B5)

Rated Voltage : 415 V ± 10%

Efficiency Class : IE2

Ambient Temperature : 50 °C

Duty Type : S1 (Continuous Duty)

Altitude : Up to 1000 meters above M.S.L.

Motor Type : Air Over Motor (AOM) Squirrel Cage Induction Motor

Rated Frequency : 50 Hz ± 5%

Combined Variations : ±10%

Explore other Variants (6)

Ships within 30 days

LHP Cooling Tower Motors IE3 Flange Mounted (B5) 2 Pole 3000 RPM Power(0.5 to 2 HP)

By LHP

₹10,619 - ₹20,059

You save ₹21,017!

51.17% OFF

LHP Cooling Tower Motors IE3 Flange Mounted (B5) 2 Pole 3000 RPM is designed for cooling tower systems that require efficient, high-speed motor operation with a secure mounting arrangement. Falling under the Energy Efficient Motors category, this LHP motor features IE3 efficiency and a 2-pole configuration rated for 3000 RPM, making it suitable for driving cooling tower fans and compatible rotating equipment. The B5 flange-mounted construction allows direct and stable equipment integration, supporting installations where space, alignment, and mounting compatibility are important. Its application-focused design is intended to provide dependable rotational performance during regular cooling tower operation.The LHP Cooling Tower Motors IE3 Flange Mounted (B5) 2 Pole 3000 RPM combines premium efficiency with a high-speed configuration to support effective cooling tower performance. The IE3 efficiency class is suited to applications where reducing electrical energy consumption during operation is an important consideration. Its 2-pole design delivers the required 3000 RPM speed, while the B5 flange arrangement provides a practical interface for compatible cooling tower assemblies. This motor is specifically suited to cooling tower applications demanding efficient power utilization, consistent speed, reliable mechanical installation, and continuous operational capability.

Pole : 2 Pole

Phase : 3 Phase

IP Rating : IP55

Type of Product : Cooling Tower Motors

Speed : 3000 RPM

Insulation Class : Class F

Mounting Type : Flange Mounted (B5)

Rated Voltage : 415 V ± 10%

Efficiency Class : IE3

Ambient Temperature : 50 °C

Duty Type : S1 (Continuous Duty)

Altitude : Up to 1000 meters above M.S.L.

Motor Type : Air Over Motor (AOM) Squirrel Cage Induction Motor

Rated Frequency : 50 Hz ± 5%

Combined Variations : ±10%

Explore other Variants (5)

Ships within 30 days

LHP Cooling Tower Motors IE2 Flange Mounted (B5) 2 Pole 3000 RPM Power(0.5 to 2 HP)

By LHP

₹9,439 - ₹18,879

You save ₹18,527!

49.53% OFF

LHP Cooling Tower Motors IE2 Flange Mounted (B5) 2 Pole 3000 RPM is engineered for cooling tower applications where dependable motor performance and efficient operation are essential. Designed as part of the Energy Efficient Motors category, this LHP motor combines IE2 efficiency with a 2-pole configuration to deliver high-speed operation at 3000 RPM. Its flange-mounted B5 construction supports convenient installation where the motor needs to be directly integrated with compatible cooling tower equipment. The design is suited to applications requiring consistent rotational performance, stable operation, and effective power utilization.The LHP Cooling Tower Motors IE2 Flange Mounted (B5) 2 Pole 3000 RPM is purpose-built to support cooling tower systems that demand reliable continuous-duty operation. Its flange mounting arrangement helps maintain a secure mechanical connection while the high-speed 2-pole design enables efficient fan and drive operation. As an IE2 motor, it is designed to provide improved energy performance compared with standard-efficiency motor designs, helping support practical power consumption during regular operation. With its application-focused construction, this LHP motor is suitable for cooling tower setups where speed, efficiency, mounting compatibility, and dependable performance are key requirements.

Pole : 2 Pole

Phase : 3 Phase

IP Rating : IP55

Type of Product : Cooling Tower Motors

Speed : 3000 RPM

Insulation Class : Class F

Mounting Type : Flange Mounted (B5)

Rated Voltage : 415 V ± 10%

Efficiency Class : IE2

Ambient Temperature : 50 °C

Duty Type : S1 (Continuous Duty)

Altitude : Up to 1000 meters above M.S.L.

Motor Type : Air Over Motor (AOM) Squirrel Cage Induction Motor

Rated Frequency : 50 Hz ± 5%

Combined Variations : ±10%

Explore other Variants (5)

Previous Next

Page 1 of 1 results