Have a question? Call us now at +91 9650660070

care@industrybuying.com

Loctite Epoxy Adhesives

Showing 40 out of 48 products

Sort by

Ships within 24 hrs

Loctite Metal Magic Steel Stick, 113 gm

By LOCTITE

₹1,769

Steel epoxy in stick form. Cut off a section, knead and apply to leaking pipes or damaged equipment. Cures in 10 minutes. NSF 61 approved for potable water applications. Specific Benefit : Cures under water and will adhere to most damp surfaces Adheres to most types of clean surfaces Cures in 10 minutes for fast repairs Epoxy adhesive stick applies like putty and cures to a steellike finish

Ships within 7 days

Loctite 10 kg PC 7226 Pneu Wear

By LOCTITE

Pack of 10 kilogram

₹86,139

Description:- LOCTITE® PC 7226 is a 2-part, grey, carbide-filled, trowelable, non-sagging, epoxy-based surface coating for protecting processing equipment from fine particle abrasion (with or without chemical attack). It is suitable for overhead and vertical surfaces. Typical applications include dredge pump liners, flumes and troughs, pump impellers, vibrating feeders, and chutes/hoppers. Carbide-filled epoxy Trowelable Can be used on overhead or vertical surfaces Prolongs equipment life

Loctite EA E-30CL Fast Fixture Structural Adhesive (50ml)

Ships within 24 hrs

Loctite EA E-30CL Fast Fixture Structural Adhesive (50ml)

By LOCTITE

₹3,185 ~~₹3,781~~

You save ₹596!

15.76% OFF

Product Description:- 2-part, low viscosity, industrial grade epoxy adhesive. It cures at room temperature with minor shrinkage to form an ultra clear adhesive bondline. LOCTITEEA E-30CL is a clear, colorless to slightly yellowish, 2-part, low viscosity, industrial grade epoxy adhesive. It cures at room temperature with minor shrinkage to form an ultra clear adhesive bondline with excellent impact resistance. It resists a wide range of chemicals and solvents and bonds most materials including glass, optical fibers, ceramics, metals and many rigid plastics. Cures at room temperature with minimal shrinkage to form an ultra clear adhesive bondline Excellent impact resistance Has excellent dimensional stability over a wide temperature range Used in bonding, small potting, staking and laminating applications where optical clarity and excellent structural, mechanical and electrical insulating properties are required

Loctite EA 3478 Epoxy Resin Adhesives (1kg)

Ships within 24 hrs

Loctite EA 3478 Epoxy Resin Adhesives (1kg)

By LOCTITE

Pack of 1 kilogram

₹14,159

Description:- LOCTITE® EA 3478 is a 2-part, ferro-silicon filled epoxy resin system. It is extremely resistant to corrosion, chemical attack and abrasion. It is ideal for restoring parts worn by mechanical and/or corrosion impact. Helps to restore tolerances to worn shafts, repairing worn keyways and damaged housings, filling pitted surfaces in worn machinery and restoring fit to bearing housings. Rebuilds keyways and spline assemblies Rebuilds bearings, clamp connections, tensioning elements, gear wheels or bearing seats Ferro-silicon filled with outstanding compression strength Ideal for renewing surfaces subjected to compression, thrust, impact and harsh environments

Related Searches

loctite epoxy putties

loctite epoxy coatings

Loctite PC 3473 Fast Steel Putty (500 g)

Ships within 24 hrs

Loctite PC 3473 Fast Steel Putty (500 g)

By LOCTITE

₹7,039

The Loctite PC 3473 Fast Steel Putty (500 g) – a rapid and reliable solution for on-the-spot repairs and emergency fixes. Crafted with precision and engineered for versatility, this fast steel putty is your go-to choice for bonding, rebuilding, and patching a variety of surfaces.Designed for quick and efficient repairs, the Loctite PC 3473 is ideal for applications ranging from automotive repairs to industrial maintenance. With a convenient 500 g quantity, this fast steel putty provides ample material for both professional technicians and DIY enthusiasts, ensuring a swift and durable fix.One of the key features of this putty is its rapid curing time. The Loctite PC 3473 sets quickly, allowing you to complete your repairs with minimal downtime. Whether you're fixing cracks, filling gaps, or rebuilding worn-out parts, this fast steel putty ensures a strong and resilient bond in no time.The user-friendly design of the Loctite PC 3473 makes application straightforward. The putty is easy to mix and mold, adapting to various shapes and surfaces for versatile use. Once applied, it cures to a tough and durable finish, providing a reliable solution that withstands the rigors of daily use.Experience the convenience and reliability of the Loctite PC 3473 Fast Steel Putty for all your quick repair needs. Trust in the proven performance of Loctite to deliver an adhesive that combines speed with strength. Elevate your repair projects – choose the Loctite PC 3473 for efficient and durable solutions.

Ships within 5 days

Loctite 1 lb PC 7254 Aluminum Putty

By LOCTITE

Pack of 450 gram

₹20,059

Description:- LOCTITE® PC 7254 is a gray, 2-part epoxy metal repair compound heavily reinforced with aluminum powder. Its ideal for repairing non-structural defects in aluminum castings, or where an aluminum finish is desired. It has an operating range of +30 °C to +95 °C. Used for repairing aluminum castings, worn aluminum parts, making models/jigs for odd-shaped parts and aluminum dies. Metal repair Easy to mix and use Rebuilds worn parts fast - limits downtime Forms a non-rusting aluminum-like finish Superior adhesion - forms a solid bond

Ships within 5 days

Loctite EA 3479 Epoxy Adhesive (500g)

By LOCTITE

₹8,259

Loctite EA 3479 is a 2-part, aluminium-filled epoxy adhesive ideal for repair/recovery of worn and damaged machinery such as shafts, housings, keyways and flanges as well as broken or damaged parts such as castings, pipes or fabrications. Can be used for filling cavities, levelling machinery, repairing cast-steel plates, making core molds, applying a sacrificial coating or sealing leaking pipes. It takes about 3 minutes to mix the resin and hardener (1:1 by wt) and cure at room temperature (about 25°C) for 24 hours gives a tough part that can be machined after 30 minutes. It's easily mixed and moulded to form odd shapes if required. The cured adhesive has high tensile strength, high elongation and high resistance to impact loads. Epoxy adhesives are an ideal choice for many industrial applications. They're lightweight, easy to apply, and generally have quick setup times when mixed. Loctite EA 3479 is a 2-part epoxy adhesive with aluminum powder filler, ideal for repairing machinery in the heat of heavy industry. It's also resistant to abrasion, corrosion, chemicals and thermal shock, making it a versatile option for other industrial uses. The non-sagging formula can be applied in layers to build up cavities or levelling machinery, or used to repair cast-steel parts, make core moulds, apply a sacrificial coating or seal leaking pipes. It can even be used to rebuild or repair worn metal parts in high-temperature applications.

Loctite 10 kg PC 7000 High Temperature Abrasion Resistant Coating

Ships within 3 days

Loctite 10 kg PC 7000 High Temperature Abrasion Resistant Coating

By LOCTITE

Pack of 10 kilogram

₹62,539

Description:- LOCTITE® PC 7000 is a unique 3-part, rapid-setting, silica-based composite coating system. It is designed to protect industrial processing equipment, such as coal tip burners in boilers and furnaces, against harsh temperature and abrasion. It is an environmentally friendly, water-based system containing a resin and abrasion resistant filler mixture. Superior abrasion resistance at high temperatures up to +1,200 °C Acts as a protective barrier - sustaining boiler efficiency and prolonging equipment life Designed to protect industrial processing equipment against harsh temperature and abrasion Bonds well to inorganic substrates such as concrete and refractory bricks with minimal surface preparation Typical applications may include baffle plates of coal tip burners, aluminium and steel smelter furnace repairs and coating of refractory brick structures of chimneys

Loctite EA 3463 SteelFfilled Epoxy Putty (115 g)

Ships within 5 days

Loctite EA 3463 SteelFfilled Epoxy Putty (115 g)

By LOCTITE

₹1,415

LOCTITE 3463 is a versatile, dual component, easy to use, steel-filled epoxy repair putty. It is applied like a putty and when cured it exhibits high compressive strength and good adhesion to most surfaces. This product stops leaks in pipes and tanks, fills oversized bolt holes, smoothes welds, and repairs non-structural defects in castings or holes in tanks. This product is typically used in applications with an operating temperature range of -30 °C to +121 °C.
Features:
Steel-filled kneadable stick
Operating temperature range -55 °C to +120 °C.
For the emergency repair of tanks, pipes and castings
Key Characteristics, Mixed: Cure Speed: Fast Cure, Kneadable, Compressive Strength: High, Emergency Repair, Underwater Curing

Loctite EA 3476 Stainless Steel Putty (454 g)

Ships within 5 days

Loctite EA 3476 Stainless Steel Putty (454 g)

By LOCTITE

₹15,339 ~~₹16,552~~

You save ₹1,213!

7.33% OFF

Stainless steel putty is a high-quality, versatile compound that can be used for various applications around the home or workplace. This product is extremely effective at resisting rust and corrosion, making it great for long-lasting repairs on worn parts. It also has superior adhesion to steel, cast iron, stainless steel, concrete, wood, clean and abraded bronze, copper and aluminium. Once hardened by curing at room temperature or heating in an oven, it can be machined, drilled, tapped or filed. This putty is durable and reliable, with a high stainless steel content of 40%. It's also easy to use rub it onto the surface you need to repair and let it dry before applying a second layer. It is last for a longer period of time. It's also possible to accelerate the curing process by heating the putty up to 300°F in an oven (for half an hour). Stainless steel is widely known for its rust-proof qualities, but once a part's been damaged or worn down past the point of saving, it's often necessary to replace it. Fortunately, that doesn't mean you need to call in a professional to fabricate a new part from scratch a simple repair with stainless steel putty can save you time and money.

Loctite 20 kg PC 9402 High Performance Backing Compound

Ships within 5 days

Loctite 20 kg PC 9402 High Performance Backing Compound

By LOCTITE

Pack of 20 kilogram

₹24,779

Loctite PC 9340 High Temperature Chemical Resistant Coating (5 Kg)

Ships within 5 days

Loctite PC 9340 High Temperature Chemical Resistant Coating (5 Kg)

By LOCTITE

₹58,999

The Loctite PC 9340 High Temperature Chemical Resistant Coating (5 Kg) – a cutting-edge solution for applications that demand superior resistance to high temperatures and harsh chemicals. Engineered with precision and crafted for durability, this coating is your answer to protecting surfaces in extreme environments. The Loctite PC 9340 is specifically formulated for high-temperature applications, making it ideal for industries such as petrochemical, refining, and manufacturing. With a generous 5 Kg quantity, this coating provides ample coverage, ensuring that your surfaces are shielded against the corrosive effects of chemicals and the rigors of elevated temperatures. One of the standout features of this coating is its exceptional resistance to a wide range of chemicals, acids, and solvents. This makes it a reliable choice for environments where exposure to corrosive substances is a constant challenge. The coating creates a durable barrier that withstands chemical attacks, preventing degradation and preserving the integrity of your equipment. Application is made simple with the Loctite PC 9340. The coating is designed for easy mixing and smooth application, allowing for a seamless process even in demanding conditions. Once applied, it forms a robust protective layer that not only resists high temperatures but also provides long-lasting defense against chemical deterioration. Invest in the reliability of the Loctite PC 9340 High Temperature Chemical Resistant Coating to safeguard your critical infrastructure. Elevate your equipment's resilience and extend its service life in the face of extreme conditions. Trust in the proven performance of Loctite – choose the Loctite PC 9340 for unparalleled high-temperature and chemical resistance.

Loctite 5 kg PC 7339 Ultra High Temperature Pneu Wear

Ships within 5 days

Loctite 5 kg PC 7339 Ultra High Temperature Pneu Wear

By LOCTITE

Pack of 5 kilogram

₹73,159

Description:- LOCTITE® PC 7303 Ultra High Temperature Wearing Compound resists sliding abrasion and temperatures to 550F. Must be post-cured for maximum temperature resistance and performance. Trowelable.

Ships within 5 days

Loctite Superior Metal (1 KG KIT)

By LOCTITE

Pack of 1 piece

₹14,159

Product characteristics:
Technology : Epoxy
Chemical Type : Epoxy
Appearance(Resin) : Metallic Gray
Appearance(Hardener) : White
Appearance(Mixed) : Metallic Gray
Components : Two component-requires mixing
Mix Ratio,by volume Resin:Hardener : 4:1
Mix Ratio, by weight Resin: Hardener : 7.25:1
Cure : Room temperature cure
Application : Industrial maintenance
Specific Benefit :
High ferro-silicon content
Resists corrosion, abrasion, and chemicals
Rebuilds worn parts fast – limits downtime
Superior adhesion - forms a solid bond
Long lasting

Ships within 5 days

Loctite EA E-20HP Epoxy Adhesive (50ml)

By LOCTITE

₹3,657

LOCTITE EA E-20HP is an off-white, 2-part, toughened, medium-viscosity, industrial grade epoxy adhesive with a medium work life. The mixture cures at room temperature to form a tough bondline with high peel resistance and high shear strengths. It is resistant to a wide range of chemicals and solvents and is an excellent electrical insulator. Forms a tough bondline that provides high peel resistance and high shear strengths Provides excellent bond strengths to a wide variety of plastics and metals Used as adhesive for bonding dry concrete or limestone for architectural applications Ideal for general purpose industrial assemblies

Ships within 3 days

Loctite PC 7218 Wearing Compound (2 Kg)

By LOCTITE

₹16,519

LOCTITE PC 7218 is a medium-viscosity compound with a smooth consistency that can be easily applied using a trowel. The material can also be easily removed by hand or with the help of a sharp scraper tool. Metalworkers like this compound because it can protect parts from coarse particle abrasion or erosion. They also appreciate its ability to renew worn surfaces fast. The first thing you want to know about LOCTITE PC 7218 Compound is that it's not just a coating; it's a protective coating. You might be wondering how this relates to the world of concrete. Well, some areas of your concrete need protection from wear and tear. For example, dust collection systems have parts that need protection from sand and debris. The good news is that you can protect them with LOCTITE PC 7218 Compound. Just apply the compound directly on the surface of your equipment and you'll have a nice layer of protection.Both are compounds, but they are meant to be used on their own: you wouldn't put primer on over your topcoat! And in the world of adhesive bonding, we have epoxies and urethanes, which also fall into the category of compounds. Epoxies are often used as surface coatings (for example, like the LOCTITE PC 7218 described above) while urethanes are typically used as sealants (like in automotive body work).

Loctite PC 9020 Epoxy Cruher Backing Compound (10 Kg)

Ships within 3 days

Loctite PC 9020 Epoxy Cruher Backing Compound (10 Kg)

By LOCTITE

Bucket of 10 kilogram

₹11,562

Description:- LOCTITE PC 9020I is a blue, 2-part epoxy system for backing wear metal in gyratory and cone crushers under typical dry service temperatures of -22 °F to +221 °F (-30 °C to +105 °C). It eliminates the need for traditional melting or special equipment and has high hydrolytic stability which eliminates the formation of gaps between backing and liners or support structures.

Ships within 5 days

Loctite Metal Set HTA (500 GMS KIT)

By LOCTITE

₹9,085

2-part, aluminium-filled epoxy adhesive that is ideal for the repair and recovery of worn and damaged machinery.
LOCTITE EA 3479 is a 2-part, aluminium-filled epoxy adhesive ideal for repair/recovery of worn and damaged machinery such as shafts, housings, keyways and flanges as well as broken or damaged parts such as castings, pipes or fabrications. Can be used for filling cavities, levelling machinery, repairing cast-steel plates, making core moulds, applying a sacrificial coating or sealing leaking pipes.
Your benefits :
Rebuilds and repairs worn metal parts in high operating temperature applications
Non-sagging, heavily reinforced, aluminium powder-filled 2-part epoxy
Easily mixed and moulded to form odd shapes if required
Cures to a non-rusting, aluminium-like finish

Loctite 25 lb PC 9313 High Impact Wearing Compound

Ships within 5 days

Loctite 25 lb PC 9313 High Impact Wearing Compound

By LOCTITE

Pack of 11 kilogram

₹1,39,604

Loctite EA E-00CL/100CL Epoxy Adhesive (50ml)

Ships within 5 days

Loctite EA E-00CL/100CL Epoxy Adhesive (50ml)

By LOCTITE

₹4,247

Loctite EA E-00CL/100CL is a clear, 2-part, fast setting, flowable, industrial grade epoxy adhesive. Once mixed, it cures at room temperature to form a clear, rigid, machinable bondline. The cured epoxy is resistant to various chemicals and solvents and is an excellent electrical insulator. Used for general purpose bonding, potting or encapsulating. Simply mix 1 part of EA E-00CL Adhesive with 1 part of Loctite 100CL Hardener to form a mixture that can be applied with a brush or spatula. Place the mixed epoxy on one surface to be bonded and allow the adhesive to self-level before applying the second surface for bonding. Cure overnight at room temperature under a continuous load of 4 lbs. per sq. in., then remove the clamping pressure after 24 hours to obtain maximum mechanical properties. A clear varnish might be perfect for something that will be handled frequently. If your project will hang on a wall or sit on a table and remain untouched, oil-based paints may give it a higher quality. Loctite EA E-00CL/100CL is a clear, two part, fast setting, flowable industrial grade epoxy adhesive. The cured epoxy is resistant to various chemicals and solvents and is an excellent electrical insulator. Used for general purpose bonding, potting or encapsulating; it works on various plastic, metal, glass, rubber, wood and ceramic substrates and can be used in applications that require a clear bondline.

Ships within 5 days

Loctite Brushable Ceramic (1 KG KIT)

By LOCTITE

₹20,059

LOCTITE® PC 7333GY BRUSHABLE CERAMIC CINZA brushes on to form a smooth, corrosion-resistant coating. Protects against turbulence, abrasion, and cavitation. Can also be used as a top coat over LOCTITE Nordbak wearing compounds for surface rebuilding and lasting protection. Resists temperatures to 200F.
Technical Information :
Applications : Abrasion Resistant, Anti-Corrosion Coatings, Corrosion Protection, Finishing Coatings, Wear Resistant Coatings, Wear-Resistant Coatings
Specifications Met : American Bureau of Shipping (ABS)
Application Method : Brush
Compressive Strength (psi @ 77°F) : 10180
Key Characteristics : Cavitation Resistant, Wear Resistant, Corrosion Preventative, Abrasion Resistant, Turbulence Resistant
Mix Ratio : 2.75:1, 4.8:1
Physical Form : Liquid
Shore Hardness Durometer : 85
Shore Hardness Scale : D
Usage Temperature (°F) : 200
Work Life Time : 30 min.
Specific Benefit :
Ceramic and silicon carbide filled - to provide maximum protection
Ultra-smooth brushable consistency
Easy to mix and use
Reduces downtime
Superior adhesion - forms a solid bond

Loctite 5 kg PC 7319 Chemical Resistant Coating

Ships within 5 days

LOCTITE PC 7319 Chemical Resistant Coating

By LOCTITE

Pack of 5 kilogram

₹34,219 - ₹34,219

Loctite PC 7319 Epoxy Based Chemical Resistant Coating is a high-performance coating designed to provide exceptional protection against chemical exposure, corrosion, and abrasion in industrial, commercial, and manufacturing environments. Renowned for its durability, resilience, and chemical resistance, this epoxy-based coating offers reliable solutions for protecting concrete, metal, and other substrates from harsh chemicals, acids, solvents, and alkalis. At the heart of its effectiveness lies its advanced epoxy resin formulation, meticulously engineered to provide superior protection and long-lasting performance in demanding conditions. Loctite PC 7319 cures to form a tough and durable coating that withstands chemical exposure, abrasion, and mechanical stress, ensuring the integrity and longevity of protected surfaces. One of the key features of Loctite PC 7319 is its versatility and ease of application. It can be applied to various substrates, including concrete floors, metal surfaces, and chemical storage tanks, using brush, roller, or spray application methods. Its low viscosity ensures easy application and uniform coverage, while its fast curing time allows for quick return to service. Loctite PC 7319 is characterized by its excellent chemical resistance, providing protection against a wide range of corrosive chemicals, including acids, solvents, oils, and alkalis. This makes it ideal for use in chemical processing plants, industrial facilities, laboratories, and wastewater treatment plants, where exposure to aggressive chemicals is a concern. Furthermore, Loctite PC 7319 exhibits excellent adhesion to substrates, ensuring long-term adhesion and durability. Its seamless and non-porous finish prevents the penetration of chemicals and contaminants, making it easy to clean and maintain. In summary, Loctite PC 7319 Epoxy Based Chemical Resistant Coating offers a versatile, reliable, and high-performance solution for protecting surfaces from chemical exposure, corrosion, and abrasion. Its exceptional chemical resistance, durability, and ease of application make it an ideal choice for applications where protection against harsh chemicals is essential. Trust in its proven performance to enhance the longevity and integrity of your assets while providing peace of mind against chemical damage.

Type of Product : Chemical Resistant Coating

Model No : PC 7319

Loctite E-60HP Hysol Structural Adhesive (50 ml)

Ships within 5 days

Loctite E-60HP Hysol Structural Adhesive (50 ml)

By LOCTITE

₹4,483

LOCTITE EA E-60HP is a toughened, medium-viscosity, industrial grade epoxy adhesive with extended work life. Once mixed, the two-component epoxy cures at room temperature to form a tough, off-white, bond line which provides high peel resistance and high shear strengths. The fully cured epoxy is resistant to a wide range of chemicals and solvents, and acts as an excellent electrical insulator.
TYPICAL APPLICATIONS
The high performance epoxy provides excellent bond strengths to a wide variety of plastics and metals. Ideal for general purpose industrial applications requiring extended work life for adjusting parts during assembly.
Technical Information :
Applications : Epoxy - Chemical Resistant,Epoxy - High Performance,Epoxy - High Temperature,Structural Bonding,Structural Metal
Specifications Met : Canadian Food Inspection Agency (CFIA)
Fixture Time : 3 hr.
Full Cure Temperature (°C) : 25
Full Cure Temperature (°F) : 77
Full Cure Time : 24 hr.
Key Characteristics : Peel Strength: High Peel Strength, Strength: High Strength, Work Life: Medium Work Life, Shear Strength: High Shear Strength, Toughened, Performance: High Performance
Mix Ratio : 2:1
Number of Components : 2 Part
Shear Strength, Steel (psi) : 4320
Substrates : Metal, Plastic, Ceramic
Technology : Epoxy
Temperature Resistance (°C) : 121
Temperature Resistance (°F) : 250
Viscosity (Brookfield mPa.s (cP)) : 45000
Viscosity Temperature (°C) : 25
Viscosity Temperature (°F) : 77
Work Life Time : 60 min.

Ships within 4 days

Loctite Wear Resistant Putty (1 KG KIT)

By LOCTITE

₹15,339

2-part, grey, ceramic-filled, trowelable, epoxy-based surface coating putty for protecting badly worn surfaces. Does not demonstrate shrinkage or sagging.
LOCTITE® PC 7222 Wear Resistant Puttyhaveceramic fibers that give this trowelable putty excellent wear and abrasion resistant properties under typical dry service temperatures of 29 to +107C (20 to +225F). Provides smooth, low friction finish for equipment exposed to wear, erosion, and cavitation.
Your benefits :
For badly worn surfaces
No shrinkage or sagging
Can be used on overhead or vertical surfaces
Conforms to odd shapes
Technical information :
Applications : Abrasion Resistant, Corrosion Protection, Wear Resistant Coatings, Wear-Resistant Coatings
Agency Approvals / Specifications : NAVSEA, NEHC, ABS, CFIA Listed
Fixture Time : 60 min.
Key Characteristics : Abrasion Resistant, Trowelable, Shock Resistant, Wear Resistant, Performance: High Performance, Gap Filling, Toughened, Water Resistant, Paintable
Mix Ratio : 2:1
Physical Form : Putty
Shore Hardness Durometer : 89
Shore Hardness Scale : D
Technology : Epoxy
Usage Temperature (°F) : 225
Work Life Time : 30 min.

Loctite PC 7383 Non-Sag Polyurethane Coating (10 Kg)

Ships within 5 days

LOCTITE PC 7383 Protective Coating

By LOCTITE

Can of 10 kilogram

₹58,999 - ₹58,999

You save ₹6,317!

9.67% OFF

LOCTITE PC 7383 Protective Coating Specializes in the industrial non-stick coating process and uses two types of non-stick material: PTFE (polytetrafluoroethylene), the first of the modern non-stick fluoropolymer coatings, was introduced in 1938 and is still among the world's most popular nonstick products.

Type of Product : Protective Coating

Model No : PC 7383

Loctite PC 7230 Epoxy Compound (11.34 Kg)

Ships within 5 days

Loctite PC 7230 Epoxy Compound (11.34 Kg)

By LOCTITE

₹1,03,839

LOCTITE PC 7230 is a 2-part grey epoxy compound used for the protection of processing equipment from coarse particle abrasion. LOCTITE PC 7230 is a trowelable epoxy compound surface coating with high temperature resistance, from -30 to +230°C. The compound protects processing equipment from coarse particle abrasion by creating a sacrificial coating to preserve the structural integrity of the original substrate. Trowelable consistency makes this product a good choice for application to overhead and vertical surfaces.LOCTITE is used for critical applications in industries as diverse as aerospace, marine, automobile manufacturing and medical equipment manufacturing, your customers will feel confident knowing your product has been crafted with care. There's no other brand like LOCTITE—trust it to ensure your success. The product has a low volume shrinkage and is resistant to yellowing during curing. The product cures at ambient temperatures, resulting in shorter cycle times than other room temperature cure epoxy compounds. LOCTITE PC 7230 is easy to use and has excellent adhesion properties on most substrates. It does not require mixing or thorough mechanical mixing prior to application.LOCTITE PC 7230 is suitable for application over almost any substrate and material combination. These include standard steel substrates, non-ferrous substrates (including aluminium), mild steel with ferrous substrates (such as castings), galvanised steel, stainless steel and other substrates not susceptible to corrosion or chemical attack. LOCTITE PC 7230 has good impact resistance and resistance to degradation by UV radiation.

Loctite PC 9626, 4.54 Kg Deep Pour Grout Kit (Black)

Ships within 5 days

Loctite PC 9626, 4.54 Kg Deep Pour Grout Kit (Black)

By LOCTITE

₹86,139

The Loctite PC 9626 5 Gallon Deep Pour Grout Kit, a high-performance solution for precision grouting in deep-pour applications, identified by the code 235637. Brought to you by Loctite, a brand synonymous with innovation and reliability, this grout kit is designed to meet the demands of large-scale projects with ease and efficiency.Tailored for professionals in construction, infrastructure, and industrial settings, The Loctite PC 9626 Deep Pour Grout Kit is your go-to choice for deep pours where traditional grouts fall short. Whether you're securing machinery bases, anchoring bolts, or supporting structural elements, this kit provides a durable and high-strength grouting solution.The generous 5-gallon size ensures an ample supply of grout for extensive applications, making it well-suited for construction projects, equipment installations, and other large-scale endeavors. The kit includes all the essential components for a seamless mixing and application process, ensuring precise and efficient coverage.Loctite's PC 9626 Deep Pour Grout is formulated for exceptional flow and self-leveling characteristics, allowing it to reach and fill deep voids with ease. Its high compressive strength provides reliable support and stability, making it ideal for projects where structural integrity is paramount. The grout is resistant to shrinkage and provides excellent adhesion to a variety of surfaces.

Loctite PC 7333 Brushable Ceramic Putty (1 Kg)

Ships within 7 days

LOCTITE PC 7333 Nordbak Brushable Ceramic Putty

By LOCTITE

₹9,911 - ₹55,459

Loctite PC 7333 Brushable Ceramic Putty is a high-performance, two-component epoxy putty specially formulated for repairing and rebuilding worn or damaged surfaces in industrial, manufacturing, and maintenance applications. Renowned for its exceptional durability, strength, and versatility, this brushable ceramic putty offers reliable solutions for rebuilding, resurfacing, and protecting metal surfaces from abrasion, erosion, and corrosion. At the core of its effectiveness lies its advanced ceramic-filled epoxy resin formulation, meticulously engineered to provide superior adhesion and wear resistance. Loctite PC 7333 cures to form a tough and durable ceramic-reinforced coating that withstands extreme abrasion, impact, and temperature fluctuations, ensuring long-lasting performance in demanding environments. One of the key features of Loctite PC 7333 is its ease of application and versatility. It can be applied using a brush or roller to rebuild and repair worn or damaged surfaces, including pumps, valves, shafts, and machinery components. Its smooth and creamy consistency ensures easy application and excellent adhesion to various substrates, including metal, concrete, and ceramics.

Type of Product : Nordbak Brushable Ceramic Putty

Color : Grey

Model No : PC 7333

Application : Protective Coating

Technology : Epoxy Based

Cure : Room temperature

Loctite EAE-30HV Epoxy Structural Bonder (1.5 Kg)

Ships within 7 days

Loctite EAE-30HV Epoxy Structural Bonder (1.5 Kg)

By LOCTITE

Pack of 1 piece

₹3,185

Loctite EA E-30HV is a High Performance Epoxy Compound for applications of Potting and Bonding. This solution is developed for the Manufacturing sector need for insulation and thermal resistance potting and bonding. This solution provides the following features and benefits: High temperature resistance and reliable performance in extreme conditions Fast fixture strength allows for a big jump in productivity ~ even upto 6 times. Great choice for electrical insulation applications as it makes it ideal for any applications that have this requirement Depending on the customer's existing process, there is bound to be a productivity improvement anywhere in the range of 33% to 600% Loctite EA E 30HV is used by electric motor manufacturers for bonding of magnet to rotor in assembly and by other electrical component manufacturers for potting, where insulation is required. Some examples of markets which can benefit from this solution are as follows. Further to this explained is the application part. 1. MV Switchgear (Contactor coil potting) 2. Industrial Inverters (Laminate bonding) 3. Ultrasonic Cleaning Machine (Piezo crystal bonding) 4. Industrial Motors (Magnet bonding) Examples where Loctite EA E 30HV has already been proven to meet all customer requirements are as follows: Magnet Bonding Loctite EA E 30HV can meet all application requirements and deliver superior performance compared to conventional methods. This solution provides: - High strength and vibration resistance - Easy to use in assembly operations - High temperature withstanding capacity Contactor Coil Potting Loctite EA E 30HV is used in Switchgears for potting of contactor coil in fixture. This solution provides: - High gap fill - High temperature resistance - Electrical insulation Piezo Crystal Bonding Loctite EA E 30HV is used in Ultrasonic Cleaning Machine for bonding of piezo electric crystal that provides: - High impact strength - Electrical insulation - High temperature resistance This solution has already proven cost savings of 38% and can also showcase this to other customer that these savings can be achieved by them too. For more information, please contact: or www.henkel.in/enquiry. Henkel operates worldwide with leading brands and technologies in three business areas: Laundry & Home Care, Beauty Care and Adhesive Technologies. Founded in 1876, Henkel holds globally leading market positions both in the consumer and industrial businesses with well-known brands such as Persil, Schwarzkopf and Loctite. Henkel employs about 47,000 people and reported sales of 16.4 billion euros and adjusted operating profit of 2.5 billion euros in fiscal 2013. Henkel's preferred shares are listed in the German stock index DAX
Note :- Special order will take 15-16 days to deliver the product

Loctite PC 7234 High Temperature Brushable Ceramic (1 Kg)

Ships within 7 days

Loctite PC 7234 High Temperature Brushable Ceramic (1 Kg)

By LOCTITE

₹31,859

Description:- LOCTITE PC 7234 is a 2-part, grey, ceramic-filled, brushable epoxy surface coating providing high temperature resistance in a temperature range from -30 to +205°C. It creates a high gloss, low friction sacrificial surface that protects against fine particle abrasion. It also works well as a top coat over LOCTITE wearing compounds for applications requiring surface rebuilding and lasting protection. Ceramic-filled to protect against fine particle abrasion High temperature resistance High gloss, low friction finish Easy to use and brushable

Loctite PC 7222 Wear Resistant Putty (1 Kg)

Ships within 7 days

Loctite PC 7222 Wear Resistant Putty (1 Kg)

By LOCTITE

₹11,563

LOCTITE PC 7222 is a wear resistant putty that’s ideal for filling pits and irregularities in metal surfaces. It comes in a plastic container with an applicator stick, and it can be used on overhead or vertical surfaces. Its formula is phosphate-free and contains no solvents, so it’s easy to apply—all you do is smooth it over the pits or irregularities, let it dry for 24 hours, then peel off the excess. You’ll get a smooth, abrasion-resistant coating that renews badly worn surfaces. This product is also great for distributing heavy loads more evenly across flat surfaces such as pipe fittings, elbows, pumps, butterfly valves, turbine blades and tanks. The super-strong formula doesn't sag or shrink when applied to uneven surfaces and provides a smooth finish with very low friction. And because LOCTITE PC 7222 Putty is non-hardening and resists temperature extremes of up to 500 degrees Fahrenheit (260 degrees Celsius), you don’t have to worry about it drying out or hardening prematurely.LOCTITE PC 7222 is a wear resistant putty that renews badly worn surfaces and provides a smooth, abrasion-resistant coating for a wide range of applications. It can be used on overhead or vertical surfaces.LOCTITE has created a solution that is made up of two parts: LOCTITE PC 7222 and LOCTITE Epoxy Resin 6301. When combined with LOCTITE Hardeners, they form a hard bond that will seal up those fatal imperfections.

Loctite PC7210 A Toughened Epoxy Resin Paste 715 g

Ships within 7 days

LOCTITE PC 7210 Toughened Epoxy Resin Paste

By LOCTITE

Pack of 715 gram

₹4,129 - ₹9,203

Loctite PC7210 Toughened Epoxy Resin Paste is a high-performance epoxy adhesive specifically formulated for demanding bonding, sealing, and repair applications in industrial, automotive, aerospace, and marine environments. Renowned for its exceptional strength, durability, and toughness, this epoxy resin paste offers reliable solutions for bonding metals, ceramics, plastics, composites, and concrete. At the heart of its effectiveness lies its advanced epoxy resin formulation, meticulously engineered to provide superior bonding performance and structural integrity. Loctite PC7210 cures to form a tough and durable bond that withstands impact, vibration, and thermal cycling, ensuring long-lasting performance in harsh and challenging conditions. One of the key features of Loctite PC7210 is its paste consistency, which allows for easy application and dispensing, even on vertical or overhead surfaces. This makes it ideal for bonding, sealing, and repairing applications where precise application and adherence to irregular surfaces are essential. Loctite PC7210 is characterized by its high shear and peel strength, providing reliable bonding solutions for a wide range of substrates. Its toughened formulation makes it resistant to cracking and deformation under stress, ensuring the integrity and longevity of bonded assemblies. Furthermore, Loctite PC7210 exhibits excellent resistance to moisture, chemicals, and temperature extremes, ensuring long-term durability and reliability in demanding environments. This resistance enhances the longevity of bonded assemblies, reducing the need for frequent maintenance or reapplication. In summary, Loctite PC7210 Toughened Epoxy Resin Paste offers a versatile, reliable, and high-performance bonding solution for a wide range of industrial and automotive applications. Its exceptional strength, durability, and toughness make it an ideal choice for applications where strong, reliable bonds are essential. Trust in its proven performance to enhance product quality, reliability, and efficiency in your operations.

Type of Product : Toughened Epoxy Resin Paste

Loctite PC 3488 A and B Epoxy Resin Adhesives (350 + 105 g)

Ships within 7 days

Loctite PC 3488 A and B Epoxy Resin Adhesives (350 + 105 g)

By LOCTITE

₹19,507

LOCTITE® EA 3488 A is a metallic gray, 2-part, ferro-silicon filled epoxy resin system. It is ideal for restoring parts worn by mechanical and/or corrosion impact. Typical applications include restoring tolerances to worn shafts, repairing worn keyways, repairing damaged housings, filling pitted surfaces in worn machinery and restoring fit to bearing housings.In addition, it has a high ferro-silicon content that provides extra wear resistance to withstand the rigors of frequent use. It's also able to resist corrosion, abrasion and chemicals, which means it will work in a variety of conditions. Its high compression resistance also makes it ideal for sealing surfaces like engine blocks or cylinder heads where heavy loads can be applied repeatedly without causing damage.LOCTITE® EA 3488. This is a two-part, epoxy resin system that's great for rebuilding parts that have worn down or have been affected by corrosion. It's extremely resistant to corrosion and other forms of abuse, and it can withstand temperatures from -30° to 150° Celsius. It also bonds well to metal surfaces. In these situations it will build up a protective coating that resists further wear. This seals the surface and protects it from further erosion from impact or chemicals.EA 3488 can be used as an adhesive for parts held together by normal adhesion. It can also be used as a filler in porous materials.

Loctite PC 7355 Wearing Compound (10 Kg)

Ships within 7 days

Loctite PC 7355 Wearing Compound (10 Kg)

By LOCTITE

₹69,619

LOCTITE Wearing Compound is a two-part ceramic filled epoxy paste designed to protect, rebuild, and repair high wear areas of your processing equipment. The paste is used with a hardener, which is typically LOCTITE PC 7100A one-part, low viscosity epoxy or LOCTITE 7800X two-part epoxy hardener. LOCTITE PC 7355 Wearing Compound contains ceramic fillers that provide excellent thermal stability at all operating temperature ranges. The hydraulic flow characteristics of the paste help it to fill gaps in machinery as small as 0.1mm and will not shrink as it cures. LOCTITE 7800X Hardener provides excellent flow characteristics and is used when a flexible bond at elevated temperatures is required. The combination of the two systems allows you to tailor the compound for your specific application needs. When using both systems, you should mix them in the exact ratio specified on the packaging to ensure an even distribution of ingredients throughout the compound.A two-part epoxy paste made of an amine curing agent and an aromatic oil, LOCTITE PC 7355 Wearing Compound provides excellent resistance against corrosion and abrasion. The epoxy resin also offers excellent adhesion to metal, while the ceramic filler improves mechanical characteristics by allowing the compound to flex with movement in the components.

Loctite POLYPOXY PS Polysulphide Modified Epoxy Resin Protective Coating (20 L)

Ships within 10 days

Loctite POLYPOXY PS Polysulphide Modified Epoxy Resin Protective Coating (20 L)

By LOCTITE

Can of 20 litre

₹77,979

The Loctite POLYPOXY PS Polysulphide Modified Epoxy Resin Protective Coating (20 L) – a groundbreaking solution for superior surface protection in demanding environments. Precision-engineered and formulated for excellence, this protective coating offers unmatched durability and resilience against a variety of challenging conditions. Designed for versatility, the Loctite POLYPOXY PS Protective Coating is ideal for applications ranging from industrial facilities to marine structures. With a substantial 20 L quantity, this coating provides extensive coverage for large surfaces, ensuring comprehensive protection against the elements. The standout feature of this protective coating is its polysulphide modified epoxy resin formula. This unique combination delivers exceptional chemical resistance, making it an ideal choice for environments where exposure to corrosive substances is a constant concern. The coating forms a robust barrier, safeguarding surfaces from the deleterious effects of chemicals, acids, and harsh weather conditions. Application is a breeze with the Loctite POLYPOXY PS. The coating is designed for easy mixing and smooth application, allowing for a hassle-free process even in challenging conditions. Once applied, it cures to form a durable and flexible protective layer that adapts to the structural movement while maintaining its integrity. Invest in the reliability of the Loctite POLYPOXY PS Polysulphide Modified Epoxy Resin Protective Coating to ensure the longevity and resilience of your surfaces. Trust in the proven performance of Loctite to provide a solution that stands up to the toughest challenges. Elevate your surface protection – choose the Loctite POLYPOXY PS for unparalleled durability and chemical resistance.

Loctite EA CP 2111 Structural Adhesive (400 g)

Ships within 10 days

Loctite EA CP 2111 Structural Adhesive (400 g)

By LOCTITE

₹2,087

The Loctite EA CP 2111 Structural Adhesive (400 g) – a superior solution for robust and enduring bonds in structural applications. Precision-engineered and crafted for excellence, this structural adhesive sets the standard for strength and reliability.Designed for versatility, the Loctite EA CP 2111 is ideal for bonding a variety of materials, including metals, plastics, and composites. With a convenient 400 g quantity, this adhesive provides ample coverage for both professional and DIY projects, ensuring a secure and durable bond.One of the standout features of this structural adhesive is its exceptional strength. The Loctite EA CP 2111 is formulated to deliver high-performance bonding that withstands the rigors of structural applications. Whether you're working on construction projects, automotive repairs, or industrial applications, this adhesive ensures a steadfast connection that endures over time.The user-friendly design of the Loctite EA CP 2111 makes application a breeze. It allows for easy mixing and precise dispensing, ensuring a seamless process for professionals and enthusiasts alike. Once applied, the adhesive cures to form a resilient bond that enhances the structural integrity of your projects.Invest in the reliability of the Loctite EA CP 2111 Structural Adhesive to elevate the strength and durability of your structures. Trust in the proven performance of Loctite to provide an adhesive that meets the highest standards of quality. Take your projects to the next level – choose the Loctite EA CP 2111 for unparalleled structural bonding.

Ships within 10 days

Loctite Floor Fill Fixmaster (5 Kg Kit)

By LOCTITE

₹16,519

Floor Fill is a grey, three-component and chemically resistant product that bonds to prepared steel and concrete. LOCTITE Fixmaster Floor Fill has a 40-60 minute working time and cures in 24 hours. For repairing and resurfacing cracks in concrete floors. Bonds to old and new concrete and provides greater strength and chemical resistance.
Key Features :
Two-component, natural in color (white/tan), epoxy repair adhesive
100% solids, no solvents
Excellent workability and flow
30 minute working time, 6 hour recoat, 24 hour functional cure
Fills cracks in concrete, wood, masonry, and previously coated surfaces
Coverage: 230 cubic inches per gallon
Technical Information :
Applications : Concrete Repair, Flooring, Overprint Finishing & Coating, Special Effects
Specifications Met : Canadian Food Inspection Agency (CFIA)
Agency Approvals / Specifications : CFIA Listed
Compressive Strength (psi @ 77°F) : 15000
Key Characteristics : Semi-Pourable
Mix Ratio : 4.6:1 to 9.8 Filler, 16:3.2 to 80.8 Filler
Number of Components : 3 Part
Work Life Time : 40 min.
Specific Benefit :
100 % solids
Non-shrinking
Chemical resistant
Outperforms concrete
Self-leveling
Easy to mix and use and has application versatility
Technology
Epoxy
Chemical Type
Epoxy
Appearance (uncured)
Grey Liquid
Components
Three components - requires mixing
Cure
Room temperature cure
Application
Flooring & grout

Loctite Nordback Hp Backing Compound (20 Kg Kit)

Ships within 10 days

Loctite Nordback Hp Backing Compound (20 Kg Kit)

By LOCTITE

Pack of 1 piece

₹21,239

Loctite NordBack HP Backing CompoundNote :- Special order will take 15-16 days to deliver the product

Loctite PC 9410, 4.54 Kg Concrete Grouting

Ships within 10 days

Loctite PC 9410, 4.54 Kg Concrete Grouting

By LOCTITE

₹51,919

The Loctite PC 9410 Concrete Grouting – the robust solution for structural support and precision grouting. In a substantial 4.54 Kg package, this high-performance grouting compound is engineered to provide unmatched strength and durability, making it an essential choice for both professional construction projects and DIY enthusiasts.
Loctite PC 9410 is a specially formulated concrete grouting compound designed to secure and anchor structures with precision. The 4.54 Kg size ensures an ample supply for significant applications, making it an ideal companion for projects requiring stability and reliability.
This grouting compound excels in creating a secure and lasting bond within concrete structures. Whether you're filling gaps, anchoring bolts, or providing structural support, Loctite PC 9410 is the go-to choice for a consistent and reliable result.
The 4.54 Kg package is designed for efficiency and ease of use. The compound is easily mixable, allowing for precise application with the included instructions. The substantial size ensures you have enough material for larger projects without the need for frequent replenishment.
Loctite PC 9410 Concrete Grouting is engineered for rapid curing, allowing you to proceed with subsequent construction phases promptly. This compound provides the confidence that your structures are well-supported and built to withstand the test of time.

Ships within 10 days

LOCTITE Nordback Magna Crete

By LOCTITE

Pack of 1 piece

₹42,479 - ₹42,479

Loctite Nordbak Magna-Crete is a high-performance, epoxy-based repair compound specifically formulated for rebuilding, repairing, and resurfacing concrete surfaces. Developed by Henkel, a global leader in adhesive and sealant technologies, Loctite Nordbak Magna-Crete is renowned for its reliability, durability, and versatility in repairing damaged concrete structures. This repair compound is designed to provide exceptional adhesion to concrete, masonry, stone, and other surfaces, creating a strong, durable bond that withstands heavy traffic, abrasion, and impact. It effectively fills and seals cracks, holes, and voids in concrete, restoring the structural integrity and enhancing the appearance of the repaired surfaces. Loctite Nordbak Magna-Crete offers outstanding compressive strength, flexural strength, and chemical resistance, making it suitable for use in a wide range of industrial, commercial, and residential applications. It can be used for repairing concrete floors, sidewalks, ramps, steps, walls, and other structures subjected to wear, weathering, and deterioration. One of the key benefits of Loctite Nordbak Magna-Crete is its ease of application. It can be troweled, brushed, or sprayed onto surfaces, allowing for flexible application methods to suit different repair needs. The compound cures quickly to form a hard, durable finish that provides long-lasting protection against further damage.

Type of Product : Magna Crete

Model No : Nordback

Types & Features : Magna Crate

Page 1 of 2 results