Have a question? Call us now at +91 9650660070

Microbelts Classical Belts

Showing 34 out of 34 products

Sort by

Ships within 10 days

Microbelts Vee Belt CX Section 22 mm Width, 14 mm Thickness (Size: 85 - 99)

By Microbelts

₹1,132 - ₹1,769

You save ₹259!

14.47% OFF

Microbelts Vee Belt CX Section 22 mm Width, 14 mm Thickness (Size: 85 - 99) is intended for compatible mechanical transmission systems that specify a CX-section Vee belt. The belt has a stated width of 22 mm and thickness of 14 mm, helping users check the required cross-sectional profile for the intended pulley arrangement. Vee belts transfer rotational movement through frictional engagement with matching grooves, supporting operation in suitable belt-driven machinery. The size range of 85 to 99 identifies this particular variant within the CX-section family and helps distinguish it from other belt sizes. Potential applications include compatible production machinery, industrial equipment, workshop systems and other mechanical drives designed for the CX profile. To ensure correct selection, compare the stated size and section with the existing belt or equipment documentation. Before installation, inspect pulley condition and confirm proper alignment. Belt tension should be adjusted according to the manufacturer's recommendations to help maintain suitable contact and avoid excessive strain. Routine inspection can identify cracks, fraying, glazing or other visible signs of wear. Microbelts Vee Belt CX Section 22 mm Width, 14 mm Thickness (Size: 85 - 99) offers a defined specification for maintenance and replacement requirements where the equipment calls for a CX-section belt within this size range.

Type of Product : Vee Belt

Thickness : 14 mm

Width : 22 mm

Height : 14 mm

Section : CX

Ships within 30 days

Microbelts Vee Belt C Section 22 mm Width, 14 mm Thickness (Size: 96 - 130)

By Microbelts

₹907 - ₹1,297

You save ₹393!

23.24% OFF

Microbelts Vee Belt C Section 22 mm Width, 14 mm Thickness (Size: 96 - 130) is a mechanical transmission belt intended for equipment that specifies the C-section profile. Its dimensions are listed as 22 mm wide and 14 mm thick, helping users identify the cross-section required for compatible pulley grooves. Vee belts transfer rotational power through frictional engagement with matching pulleys and are commonly used in suitable industrial drive systems. The size range of 96 to 130 distinguishes this variant within the C-section category and provides a defined selection for maintenance teams checking replacement requirements. This belt may be used in compatible industrial machinery, workshop equipment, production systems and other belt-driven applications. When sourcing a replacement, confirm the required size and profile using the equipment manual or the marking on the original belt. Check that the pulley grooves are in suitable condition and verify correct alignment before installation. Follow the manufacturer's guidance for belt tension to support appropriate seating and help reduce premature wear. Routine inspection for cracking, fraying, glazing and other visible damage can help identify when maintenance is required. Microbelts Vee Belt C Section 22 mm Width, 14 mm Thickness (Size: 96 - 130) offers a clearly defined option for applications where the equipment requires a C-section belt within the stated size range.

Type of Product : Vee Belt

Thickness : 14 mm

Width : 22 mm

Height : 14 mm

Section : C

Ships within 30 days

Microbelts Vee Belt C Section 22 mm Width, 14 mm Thickness (Size: 76 - 95)

By Microbelts

₹671 - ₹896

You save ₹352!

28.23% OFF

Microbelts Vee Belt C Section 22 mm Width, 14 mm Thickness (Size: 76 - 95) is designed for compatible drive assemblies that require a C-section Vee belt within the stated size range. The belt's specified width is 22 mm and its thickness is 14 mm, providing useful measurements for identifying the required cross-sectional profile. A Vee belt transmits rotational power through friction between its surface and matching pulley grooves, supporting the movement of connected machinery. The size range of 76 to 95 helps users differentiate this product from other C-section selections when ordering replacements or maintaining existing equipment. Suitable applications may include compatible production machinery, industrial equipment, workshop installations and other belt-driven systems. Correct selection depends on matching the specified belt section and size to the equipment requirements. Before installation, check the existing belt designation, inspect pulley condition and verify alignment. Apply tension in accordance with the manufacturer's instructions to support suitable engagement and avoid excessive strain. Regular inspections can identify cracking, fraying, glazing or other deterioration that may affect the belt's condition. Microbelts Vee Belt C Section 22 mm Width, 14 mm Thickness (Size: 76 - 95) provides a defined specification for replacement work on equipment engineered for this C-section profile and size range.

Type of Product : Vee Belt

Thickness : 14 mm

Width : 22 mm

Height : 14 mm

Section : C

Ships within 30 days

Microbelts Vee Belt C Section 22 mm Width, 14 mm Thickness (Size: 56 - 75)

By Microbelts

₹483 - ₹695

You save ₹255!

27.83% OFF

Microbelts Vee Belt C Section 22 mm Width, 14 mm Thickness (Size: 56 - 75) is intended for mechanical power transmission systems designed around the C-section belt profile. Its specified width of 22 mm and thickness of 14 mm provide essential dimensional details for checking compatibility with the pulley arrangement. Vee belts transmit rotational movement between shafts through frictional engagement with matching grooves. The size range of 56 to 75 identifies this variant within the C-section category and helps distinguish it from alternatives designed for different belt sizes. This belt may be suitable for compatible industrial machinery, manufacturing equipment, workshop systems and other applications using C-section Vee belts. To select the correct replacement, verify the belt designation and required size against the equipment manual or existing belt. Inspect the pulleys for wear or damage and confirm that the drive is aligned before installation. Belt tension should follow the manufacturer's recommendations to help maintain proper contact and minimise premature deterioration. Periodic checks for cracks, fraying, glazing and other visible damage can support timely maintenance. Microbelts Vee Belt C Section 22 mm Width, 14 mm Thickness (Size: 56 - 75) offers a clearly identified option for maintenance and procurement teams working with compatible C-section belt drives.

Type of Product : Vee Belt

Thickness : 14 mm

Width : 22 mm

Height : 14 mm

Section : C

Ships within 30 days

Microbelts Vee Belt C Section 22 mm Width, 14 mm Thickness (Size: 36 - 55)

By Microbelts

₹341 - ₹483

You save ₹183!

27.43% OFF

Microbelts Vee Belt C Section 22 mm Width, 14 mm Thickness (Size: 36 - 55) is designed for compatible machinery requiring a C-section Vee belt. The specified cross-section measures 22 mm in width and 14 mm in thickness, providing important details for matching the belt with the intended pulley system. Vee belts transmit rotational power through frictional contact with matching grooved pulleys and form part of many mechanical drive arrangements. The size range of 36 to 55 distinguishes this belt from other C-section options and helps users identify a selection suited to their equipment's stated requirements. Potential applications include compatible industrial drives, production machinery, workshop installations and other equipment designed for C-section belts. Before purchase, confirm the required profile and size from the machine documentation or existing belt marking. Inspect pulley grooves and drive alignment before fitting the belt, and follow the manufacturer's instructions for correct tension. A suitable match helps maintain proper engagement and can reduce unnecessary wear caused by incorrect installation. Regular inspections for cracking, fraying, glazing and other visible deterioration support preventive maintenance. Microbelts Vee Belt C Section 22 mm Width, 14 mm Thickness (Size: 36 - 55) provides a clearly specified option for replacement planning where a C-section belt with these dimensions is required.

Type of Product : Vee Belt

Thickness : 14 mm

Width : 22 mm

Height : 14 mm

Section : C

Ships within 30 days

Microbelts Vee Belt A Section 13 mm Width, 8 mm Thickness (Size: 58 - 77)

By Microbelts

₹247 - ₹317

You save ₹118!

27.2% OFF

Microbelts Vee Belt A Section 13 mm Width, 8 mm Thickness (Size: 58 - 77) is a mechanical transmission component designed for compatible belt-driven equipment. Its A-section construction is specified with a width of 13 mm and a thickness of 8 mm, helping users identify the required profile when selecting a replacement belt. Vee belts operate with matching grooved pulleys to transfer rotational power between shafts. The stated size range of 58 to 77 distinguishes this option from other sizes within the same belt section. Choosing the correct belt size and profile supports proper pulley seating and helps maintain the intended operation of the drive assembly. This belt may be used in suitable industrial machinery, production equipment, workshop installations and other applications that rely on compatible Vee-belt drives. Before fitting, confirm the required size, section and pulley specifications to avoid mismatches. Inspect the pulleys for wear or contamination, and ensure the drive is aligned and tensioned according to the equipment manufacturer's instructions. Periodic maintenance checks can help reveal cracking, frayed edges or surface deterioration that may indicate the need for replacement. Microbelts Vee Belt A Section 13 mm Width, 8 mm Thickness (Size: 58 - 77) provides a defined specification for procurement and maintenance teams selecting an A-section belt for an appropriate mechanical power transmission system.

Type of Product : Vee Belt

Thickness : 8 mm

Width : 13 mm

Height : 8 mm

Section : A

Ships within 30 days

Microbelts Vee Belt A Section 13 mm Width, 8 mm Thickness (Size: 38 - 57)

By Microbelts

₹199 - ₹247

You save ₹96!

28.07% OFF

Microbelts Vee Belt A Section 13 mm Width, 8 mm Thickness (Size: 38 - 57) is intended for power transmission systems that require an A-section Vee belt within the stated size range. The belt has a specified width of 13 mm and thickness of 8 mm, supporting compatibility with pulley systems designed for these dimensions. Vee belts transfer rotational movement from a driving pulley to a driven pulley through friction, making them a common component in mechanical drive assemblies. The size range of 38 to 57 helps identify the appropriate selection for equipment with corresponding belt requirements. Matching the belt profile and size to the drive configuration is essential for reliable operation. Applications may include compatible industrial machinery, workshop equipment, ventilation systems and other belt-driven mechanisms. During replacement, compare the required belt designation with the equipment manual or the marking on the existing belt. Check pulley condition, alignment and tension before operating the drive. A correctly matched belt can help maintain stable transmission and minimise problems caused by slipping or improper seating. Routine inspection is useful for detecting surface damage, cracking or wear before it affects equipment performance. Microbelts Vee Belt A Section 13 mm Width, 8 mm Thickness (Size: 38 - 57) offers a clearly specified belt option for maintenance and replacement requirements where the A-section profile is suitable.

Type of Product : Vee Belt

Thickness : 8 mm

Width : 13 mm

Height : 8 mm

Section : A

Ships within 30 days

Microbelts Vee Belt A Section 13 mm Width, 8 mm Thickness (Size: 138 - 185)

By Microbelts

₹553 - ₹778

You save ₹226!

28.54% OFF

Microbelts Vee Belt A Section 13 mm Width, 8 mm Thickness (Size: 138 - 185) is designed for compatible belt-driven machinery requiring the A-section profile within the stated size range. Its specified width of 13 mm and thickness of 8 mm help identify the belt's cross-sectional dimensions for selection and replacement. A Vee belt transmits rotational power through frictional engagement with matching pulley grooves, supporting movement between driving and driven components. The size range of 138 to 185 differentiates this product from smaller A-section options and provides a defined selection range for maintenance and procurement teams. Potential uses include industrial equipment, production machinery, workshop installations and other compatible mechanical drives. Selection should always follow the drive manufacturer's requirements, including the correct belt section, size and pulley configuration. Before fitting a replacement, examine the pulley grooves, verify alignment and adjust belt tension according to the equipment instructions. Incorrect sizing or installation may lead to slipping, uneven wear or reduced transmission performance. Routine inspections for cracking, fraying, glazing and other visible damage can help identify when maintenance is necessary. Microbelts Vee Belt A Section 13 mm Width, 8 mm Thickness (Size: 138 - 185) is suitable for applications where the equipment specification calls for an A-section belt within this particular size range.

Type of Product : Vee Belt

Thickness : 8 mm

Width : 13 mm

Height : 8 mm

Section : A

Ships within 30 days

Microbelts Vee Belt A Section 13 mm Width, 8 mm Thickness (Size: 18 - 37)

By Microbelts

₹116 - ₹199

You save ₹50!

20.07% OFF

Microbelts Vee Belt A Section 13 mm Width, 8 mm Thickness (Size: 18 - 37) is designed for mechanical power transmission in compatible industrial equipment and machinery. Its A-section profile features a specified width of 13 mm and thickness of 8 mm, allowing it to fit pulley arrangements designed for this belt section. Vee belts transmit rotational power between shafts through frictional contact with matching grooved pulleys. The size range of 18 to 37 provides options for equipment requiring a belt within these specified sizes. Correct profile and size selection are important for maintaining suitable pulley engagement and supporting consistent drive operation. This belt can be considered for compatible machinery used in workshops, production facilities, material-handling systems and other mechanical drive applications. Before installation, check the existing belt designation, pulley groove profile and required size against the equipment specifications. Proper alignment and appropriate tension help support efficient power transfer while reducing unnecessary wear. Regular inspection for cracks, fraying, glazing and other visible deterioration can help identify when replacement is needed. Microbelts Vee Belt A Section 13 mm Width, 8 mm Thickness (Size: 18 - 37) is suitable for replacement planning where the specified A-section profile and size range match the intended drive system.

Type of Product : Vee Belt

Thickness : 8 mm

Width : 13 mm

Height : 8 mm

Section : A

Ships within 30 days

Microbelts Vee Belt A Section 13 mm Width, 8 mm Thickness (Size: 118 - 137)

By Microbelts

₹483 - ₹553

You save ₹208!

27.34% OFF

Microbelts Vee Belt A Section 13 mm Width, 8 mm Thickness (Size: 118 - 137) is a Vee-belt option for mechanical power transmission systems designed around the A-section profile. Its stated dimensions are 13 mm in width and 8 mm in thickness, helping users identify the correct cross-section for a compatible drive. The belt works with appropriately grooved pulleys to transfer rotational movement between shafts. The specified size range of 118 to 137 makes it easier to distinguish this option from other belts in the same section when ordering replacements or maintaining industrial equipment. Correct sizing is important for suitable pulley engagement and the intended operation of the drive. This product may be considered for compatible production machinery, workshop equipment and other industrial mechanisms using A-section Vee belts. Before purchasing, compare the required size with the existing belt designation and equipment documentation. Check pulley grooves for damage and confirm that the installation arrangement supports the selected profile. Proper alignment and tension help reduce unnecessary strain and wear during operation. Periodic checks for surface cracks, frayed edges and changes in belt condition can support timely maintenance. Microbelts Vee Belt A Section 13 mm Width, 8 mm Thickness (Size: 118 - 137) offers a specified size range for replacement planning where an A-section belt with the stated dimensions is required by the equipment manufacturer.

Type of Product : Vee Belt

Thickness : 8 mm

Width : 13 mm

Height : 8 mm

Section : A

Ships within 30 days

Microbelts Vee Belt C Section 22 mm Width, 14 mm Thickness (Size: 205 - 340)

By Microbelts

₹2,123 - ₹3,303

You save ₹1,139!

25.63% OFF

Microbelts Vee Belt C Section 22 mm Width, 14 mm Thickness (Size: 205 - 340) is intended for compatible mechanical drives that require a C-section Vee belt within the specified size range. Its stated dimensions are 22 mm in width and 14 mm in thickness, helping identify the cross-sectional profile for a suitable pulley system. The belt transfers rotational power through frictional engagement with matching grooved pulleys, supporting the operation of belt-driven machinery. The size range of 205 to 340 distinguishes this selection from smaller C-section options and supports identification during equipment maintenance and replacement planning. This belt may be suitable for compatible industrial equipment, production machinery, workshop installations and other systems designed for the C-section profile. To confirm compatibility, consult the equipment documentation or check the original belt designation before ordering. Inspect the pulleys for damage and verify alignment and tension according to the manufacturer's recommendations. Correct installation helps maintain proper engagement and may reduce premature belt wear. Periodic examination for cracks, fraying, glazing and other signs of deterioration is useful for maintenance planning. Microbelts Vee Belt C Section 22 mm Width, 14 mm Thickness (Size: 205 - 340) offers a clearly specified option for machinery that requires a C-section belt matching these dimensions and size requirements.

Type of Product : Vee Belt

Thickness : 14 mm

Width : 22 mm

Height : 14 mm

Section : C

Ships within 30 days

Microbelts Vee Belt A Section 13 mm Width, 8 mm Thickness (Size: 98 - 117)

By Microbelts

₹424 - ₹483

You save ₹185!

27.68% OFF

Microbelts Vee Belt A Section 13 mm Width, 8 mm Thickness (Size: 98 - 117) is intended for compatible mechanical drives that require an A-section Vee belt in the specified size range. The belt dimensions include a width of 13 mm and a thickness of 8 mm, providing essential information for matching it with the appropriate pulley arrangement. Vee belts are commonly used to transmit rotational power through friction between the belt and the grooves of compatible pulleys. The size range of 98 to 117 identifies this particular selection within the A-section category, helping distinguish it from alternatives intended for different drive dimensions. Suitable applications may include industrial machinery, manufacturing equipment, workshop systems and other mechanisms designed for this belt profile. Correct selection should be based on the original belt specification, equipment documentation and pulley compatibility. During installation, check that the belt sits properly in the grooves and that the drive is aligned and tensioned as instructed by the equipment manufacturer. Routine inspection can help identify cracking, fraying, glazing or other wear that may affect transmission performance. Replacing a deteriorated belt at the appropriate time can support maintenance planning and reduce avoidable interruptions. Microbelts Vee Belt A Section 13 mm Width, 8 mm Thickness (Size: 98 - 117) provides a clearly identified option for compatible A-section belt replacement requirements.

Type of Product : Vee Belt

Thickness : 8 mm

Width : 13 mm

Height : 8 mm

Section : A

Ships within 30 days

Microbelts Vee Belt C Section 22 mm Width, 14 mm Thickness (Size: 132 - 200)

By Microbelts

₹1,297 - ₹2,005

You save ₹596!

22.91% OFF

Microbelts Vee Belt C Section 22 mm Width, 14 mm Thickness (Size: 132 - 200) is designed for compatible machinery using a C-section Vee-belt transmission system. The specified width of 22 mm and thickness of 14 mm provide key dimensions for matching the belt with the correct pulley arrangement. Vee belts transfer rotational movement through frictional contact with grooved pulleys, supporting power transmission between connected shafts. The size range of 132 to 200 identifies this variant among the available C-section options and helps maintenance teams select a belt that corresponds to the equipment's requirements. Potential uses include compatible industrial machinery, production equipment, workshop systems and other mechanical drives designed for this profile. Before purchase, compare the belt size and section with the existing belt marking or equipment documentation. Examine the pulleys for wear, confirm alignment and follow the manufacturer's instructions for tension adjustment. Proper installation supports suitable pulley engagement and helps limit avoidable slipping or deterioration. Regular inspection for cracks, frayed edges, glazing and other visible damage can assist preventive maintenance. Microbelts Vee Belt C Section 22 mm Width, 14 mm Thickness (Size: 132 - 200) provides a specified belt option for replacement planning where a C-section profile and the listed size range are required.

Type of Product : Vee Belt

Thickness : 14 mm

Width : 22 mm

Height : 14 mm

Section : C

Ships within 30 days

Microbelts Vee Belt A Section 13 mm Width, 8 mm Thickness (Size: 78 - 97)

By Microbelts

₹317 - ₹424

You save ₹145!

25.45% OFF

Microbelts Vee Belt A Section 13 mm Width, 8 mm Thickness (Size: 78 - 97) is designed for machinery that uses a compatible A-section Vee-belt transmission system. With a specified width of 13 mm and thickness of 8 mm, it provides key dimensional details for identifying the required belt profile. The V-shaped cross-section is intended to engage with matching grooved pulleys, allowing rotational power to pass from a driving shaft to a driven shaft through frictional contact. The size range of 78 to 97 helps differentiate this belt from other A-section options and supports selection according to the requirements of the installed drive. Potential applications include industrial machinery, workshop equipment, production systems and other compatible belt-driven mechanisms. To select a suitable replacement, verify the size and profile required by the equipment rather than relying on appearance alone. Correct pulley alignment and suitable tension are important for supporting stable operation and limiting premature wear. Before installation, examine the pulleys and remove any contamination that could interfere with belt contact. Regularly inspect the belt for cracks, fraying, glazing or other signs of deterioration. Microbelts Vee Belt A Section 13 mm Width, 8 mm Thickness (Size: 78 - 97) is an option for maintenance and replacement applications where its A-section profile and stated size range correspond to the drive system's requirements.

Type of Product : Vee Belt

Thickness : 8 mm

Width : 13 mm

Height : 8 mm

Section : A

Ships within 30 days

Microbelts Vee Belt B Section 17 mm Width, 11 mm Thickness (Size: 41 - 60)

By Microbelts

₹235 - ₹329

You save ₹93!

25.71% OFF

Microbelts Vee Belt B Section 17 mm Width, 11 mm Thickness (Size: 41 - 60) is a power transmission belt intended for machinery designed around the B-section profile. The stated dimensions are 17 mm in width and 11 mm in thickness, providing important details for checking compatibility with the intended pulley grooves. Vee belts use frictional engagement to transfer rotational power between shafts, making them useful components in compatible mechanical drive systems. The size range of 41 to 60 helps distinguish this option from other belts within the same section and supports selection for equipment requiring the specified dimensions. Potential applications include suitable industrial machinery, workshop equipment, manufacturing systems and other belt-driven assemblies. When replacing an existing belt, confirm the section and size from the equipment manual or the marking on the original component. Inspect the pulleys for wear and check their alignment before fitting the new belt. Follow the equipment manufacturer's recommendations for tension, as incorrect adjustment can contribute to slippage or premature wear. Regularly review the belt's condition for cracking, frayed edges, glazing and other visible deterioration. Microbelts Vee Belt B Section 17 mm Width, 11 mm Thickness (Size: 41 - 60) offers a defined B-section option for maintenance and procurement requirements where the listed size range matches the drive specification.

Type of Product : Vee Belt

Thickness : 11 mm

Width : 17 mm

Height : 11 mm

Section : B

Ships within 30 days

Microbelts Vee Belt B Section 17 mm Width, 11 mm Thickness (Size: 122 - 175)

By Microbelts

₹719 - ₹1,014

You save ₹350!

28.67% OFF

Microbelts Vee Belt B Section 17 mm Width, 11 mm Thickness (Size: 122 - 175) is intended for compatible mechanical transmission systems that use a B-section Vee belt. The product has a specified width of 17 mm and thickness of 11 mm, providing key details for matching the belt profile with the correct pulley arrangement. Vee belts transfer rotational power between shafts through frictional contact with grooved pulleys. The size range of 122 to 175 identifies this option within the B-section family and helps distinguish it from belts intended for other drive dimensions. Potential uses include compatible industrial machinery, production equipment, workshop installations and other belt-driven applications. Before ordering, verify the required size and section against the machine's documentation or the original belt marking. Check pulley condition and alignment before installation, and adjust tension according to the equipment manufacturer's instructions. Correct matching and fitting help maintain proper engagement and reduce avoidable wear. Routine inspection for cracking, fraying, glazing and other visible damage can support timely replacement decisions. Microbelts Vee Belt B Section 17 mm Width, 11 mm Thickness (Size: 122 - 175) provides a defined selection for maintenance and procurement teams managing equipment that specifies a B-section belt within this size range.

Type of Product : Vee Belt

Thickness : 11 mm

Width : 17 mm

Height : 11 mm

Section : B

Ships within 30 days

Microbelts Vee Belt B Section 17 mm Width, 11 mm Thickness (Size: 21 - 40)

By Microbelts

₹152 - ₹247

You save ₹79!

24.16% OFF

Microbelts Vee Belt B Section 17 mm Width, 11 mm Thickness (Size: 21 - 40) is designed for mechanical drive systems requiring a compatible B-section Vee belt. Its specified width of 17 mm and thickness of 11 mm identify the cross-sectional dimensions used when matching the belt to a pulley arrangement. Vee belts transmit rotational power through frictional contact with suitable grooved pulleys, supporting movement between connected shafts. The size range of 21 to 40 distinguishes this option from other B-section belts and helps users identify a product that corresponds to the dimensions required by their equipment. This belt may be used in compatible industrial machinery, manufacturing equipment, workshop installations and other belt-driven mechanisms. Before selecting a replacement, confirm the belt section, size and pulley requirements using the equipment documentation or existing belt marking. Ensure that the pulleys are in good condition and that the belt is installed with the recommended alignment and tension. Incorrect fitment may contribute to slipping or uneven wear, so inspection before operation is important. Periodic maintenance checks can identify cracking, fraying, glazing or other signs of deterioration. Microbelts Vee Belt B Section 17 mm Width, 11 mm Thickness (Size: 21 - 40) provides a clearly specified option for replacement applications where a B-section belt with these dimensions is required.

Type of Product : Vee Belt

Thickness : 11 mm

Width : 17 mm

Height : 11 mm

Section : B

Ships within 30 days

Microbelts Vee Belt B Section 17 mm Width, 11 mm Thickness (Size: 81 - 100)

By Microbelts

₹447 - ₹589

You save ₹224!

27.55% OFF

Microbelts Vee Belt B Section 17 mm Width, 11 mm Thickness (Size: 81 - 100) is intended for power transmission applications that specify a compatible B-section Vee belt. Its cross-sectional dimensions are listed as 17 mm wide and 11 mm thick, helping maintenance teams identify the correct profile for a particular pulley system. The belt transfers rotational power through frictional engagement with matching pulley grooves. The size range of 81 to 100 distinguishes this product from other B-section variants and provides a defined selection range for equipment requiring a belt of the corresponding size. Applications may include industrial machinery, production equipment, workshop systems and other compatible belt-driven mechanisms. For replacement work, check the belt marking and equipment documentation to verify both section and size. A suitable match is important for proper pulley engagement and stable transmission. Before operation, inspect the pulley surfaces and confirm that belt alignment and tension follow the manufacturer's instructions. Regular condition checks can help identify cracks, fraying, glazing or other signs of deterioration before they affect the drive. Microbelts Vee Belt B Section 17 mm Width, 11 mm Thickness (Size: 81 - 100) offers a clearly defined belt specification for procurement, scheduled servicing and replacement in equipment designed for the B-section profile.

Type of Product : Vee Belt

Thickness : 11 mm

Width : 17 mm

Height : 11 mm

Section : B

Ships within 30 days

Microbelts Vee Belt B Section 17 mm Width, 11 mm Thickness (Size: 101 - 120)

By Microbelts

₹589 - ₹707

You save ₹271!

27.73% OFF

Microbelts Vee Belt B Section 17 mm Width, 11 mm Thickness (Size: 101 - 120) is designed for compatible belt-driven machinery that requires the B-section profile. The specified width of 17 mm and thickness of 11 mm provide dimensional details for matching the belt to the equipment's pulley arrangement. Vee belts transmit rotational movement through friction between the belt and the grooves of suitable pulleys, supporting the operation of mechanical drives. The size range of 101 to 120 identifies this variant within the B-section category, allowing users to distinguish it from alternatives with different size requirements. This belt may be used in suitable industrial equipment, manufacturing systems, workshops and other machinery designed for a matching B-section belt. To avoid incorrect selection, compare the stated size and section with the original belt or equipment manual. Check the pulleys for wear, verify alignment and follow the manufacturer's procedure for belt tension. Proper fitting supports suitable engagement and helps reduce avoidable slipping and deterioration. Maintenance personnel should periodically inspect the belt for cracks, frayed edges, glazing and other visible damage. Microbelts Vee Belt B Section 17 mm Width, 11 mm Thickness (Size: 101 - 120) is an identifiable option for replacement planning where the B-section profile and specified size range meet the mechanical drive's requirements.

Type of Product : Vee Belt

Thickness : 11 mm

Width : 17 mm

Height : 11 mm

Section : B

Ships within 30 days

Microbelts Vee Belt B Section 17 mm Width, 11 mm Thickness (Size: 61 - 80)

By Microbelts

₹341 - ₹447

You save ₹155!

25.72% OFF

Microbelts Vee Belt B Section 17 mm Width, 11 mm Thickness (Size: 61 - 80) is designed for compatible machinery using a B-section Vee-belt drive. With a specified width of 17 mm and thickness of 11 mm, it provides key dimensional information for identifying the required belt profile. The belt works with matching grooved pulleys to transfer rotational movement from a driving shaft to a driven shaft. Its size range of 61 to 80 identifies this variant among the available B-section options, helping users choose according to the dimensions specified for their equipment. This product may be suitable for compatible production machinery, industrial installations, workshop equipment and other mechanical systems using B-section belts. Accurate selection depends on the required belt size, pulley profile and drive configuration. Before installation, check the existing belt designation and the equipment manufacturer's recommendations. Inspect pulley grooves for damage, confirm alignment and set the tension according to the specified procedure. These steps help maintain appropriate belt contact and reduce avoidable wear. Periodic examination for cracks, fraying, glazing and other deterioration supports preventive maintenance. Microbelts Vee Belt B Section 17 mm Width, 11 mm Thickness (Size: 61 - 80) provides a clearly identified replacement option for compatible B-section drive systems that require the stated dimensions and size range.

Type of Product : Vee Belt

Thickness : 11 mm

Width : 17 mm

Height : 11 mm

Section : B

Ships within 30 days

Microbelts Vee Belt D Section 32 mm Width, 19 mm Thickness (Size: 314 - 408)

By Microbelts

₹5,663 - ₹7,905

You save ₹3,510!

30.75% OFF

Microbelts Vee Belt D Section 32 mm Width, 19 mm Thickness (Size: 314 - 408) is designed for compatible machinery requiring a D-section belt for mechanical power transmission. Its specified width of 32 mm and thickness of 19 mm provide useful dimensions for identifying the required belt profile. Vee belts transfer rotational power through frictional engagement with matching grooved pulleys, supporting the movement of connected drive components. The size range of 314 to 408 distinguishes this option from other D-section selections and provides a defined reference for procurement and maintenance teams matching belts to equipment requirements. This belt may be used in suitable industrial machinery, production systems, workshop installations and other drive arrangements designed for the D-section profile. Before selecting a replacement, confirm the size and belt section against the existing belt designation or equipment manufacturer's documentation. Check pulley grooves for wear and verify correct alignment before fitting. Tension should be adjusted in accordance with the recommended procedure to support proper engagement and help prevent unnecessary wear. Regular inspections for cracking, fraying, glazing or other visible deterioration can assist preventive maintenance. Microbelts Vee Belt D Section 32 mm Width, 19 mm Thickness (Size: 314 - 408) offers a clearly identified option for compatible D-section belt drives where the stated dimensions and size range meet the application requirements.

Type of Product : Vee Belt

Thickness : 19 mm

Width : 32 mm

Height : 19 mm

Section : D

Ships within 30 days

Microbelts Vee Belt D Section 32 mm Width, 19 mm Thickness (Size: 173 - 300)

By Microbelts

₹3,185 - ₹5,427

You save ₹2,130!

28.18% OFF

Microbelts Vee Belt D Section 32 mm Width, 19 mm Thickness (Size: 173 - 300) is intended for compatible power transmission systems that specify a D-section Vee belt. The listed dimensions are 32 mm in width and 19 mm in thickness, providing the key profile details required for checking compatibility with grooved pulleys. The belt transfers rotational movement between shafts through frictional contact with suitable pulleys. Its size range of 173 to 300 identifies this variant within the D-section category and helps distinguish it from other options when selecting belts for maintenance or replacement. Suitable applications may include compatible industrial drives, manufacturing machinery, workshop equipment and other systems designed for D-section belts. For accurate selection, consult the equipment manual or verify the designation of the existing belt before ordering. Inspect the pulleys for damage, ensure that the drive is aligned and set the tension according to the manufacturer's guidance. Proper fitting helps support consistent pulley engagement and reduce avoidable wear. Routine inspections for cracking, frayed edges, glazing and other visible deterioration can help identify maintenance needs. Microbelts Vee Belt D Section 32 mm Width, 19 mm Thickness (Size: 173 - 300) provides a defined specification for users sourcing a D-section belt within the stated size range for compatible machinery.

Type of Product : Vee Belt

Thickness : 19 mm

Width : 32 mm

Height : 19 mm

Section : D

Ships within 30 days

Microbelts Vee Belt D Section 32 mm Width, 19 mm Thickness (Size: 75 - 168)

By Microbelts

₹1,533 - ₹3,067

You save ₹1,140!

27.09% OFF

Microbelts Vee Belt D Section 32 mm Width, 19 mm Thickness (Size: 75 - 168) is designed for compatible mechanical drives that require a D-section Vee belt. Its specified width of 32 mm and thickness of 19 mm provide essential dimensions for matching the belt with the intended pulley arrangement. Vee belts transmit rotational power through frictional engagement with matching grooved pulleys, allowing connected shafts and machinery components to operate together. The size range of 75 to 168 distinguishes this selection from other D-section options and helps users identify a belt that corresponds to their equipment's stated requirements. This belt may be considered for compatible industrial machinery, production equipment, workshop installations and other belt-driven systems designed for the D-section profile. Before purchasing a replacement, verify the required belt size and section using the original belt marking or equipment manual. Inspect pulley grooves for wear, confirm alignment and follow the manufacturer's instructions for belt tension. Correct fitment helps maintain appropriate engagement and can reduce premature deterioration. Regular checks for cracking, fraying, glazing and other visible damage support preventive maintenance. Microbelts Vee Belt D Section 32 mm Width, 19 mm Thickness (Size: 75 - 168) provides a clearly specified option for replacement planning where the D-section profile and stated size range match the intended drive system.

Type of Product : Vee Belt

Thickness : 19 mm

Width : 32 mm

Height : 19 mm

Section : D

Ships within 30 days

Microbelts Vee Belt B Section 17 mm Width, 11 mm Thickness (Size: 180 - 300)

By Microbelts

₹1,037 - ₹2,123

You save ₹551!

20.6% OFF

Microbelts Vee Belt B Section 17 mm Width, 11 mm Thickness (Size: 180 - 300) is designed for machinery requiring a compatible B-section belt within the stated size range. Its specified width of 17 mm and thickness of 11 mm help identify the cross-sectional profile for use with matching grooved pulleys. Vee belts support mechanical power transmission by transferring rotational movement through frictional engagement between the belt and pulley surfaces. The size range of 180 to 300 distinguishes this variant from smaller B-section options and helps maintenance teams narrow their selection according to equipment requirements. This belt may be considered for compatible industrial drives, production machinery, workshop equipment and other mechanical systems that use the B-section profile. For correct replacement, verify the required size using the original belt designation or equipment manual. Ensure that pulley grooves are in suitable condition and that alignment and tension follow the manufacturer's guidance. Incorrect fitting can contribute to slipping, uneven wear or drive interruptions. Periodic inspection for cracking, fraying, glazing and other visible deterioration helps identify maintenance needs. Microbelts Vee Belt B Section 17 mm Width, 11 mm Thickness (Size: 180 - 300) offers a clearly specified option for replacement planning where the equipment calls for the B-section profile and a size within this range.

Type of Product : Vee Belt

Thickness : 11 mm

Width : 17 mm

Height : 11 mm

Section : B

Ships within 30 days

Microbelts Vee Belt AX Section 13 mm Width, 8 mm Thickness (Size: 63 - 83)

By Microbelts

₹435 - ₹518

You save ₹170!

27.02% OFF

Microbelts Vee Belt AX Section 13 mm Width, 8 mm Thickness (Size: 63 - 83) is designed for compatible mechanical drives that call for an AX-section Vee belt. Its listed dimensions are 13 mm wide and 8 mm thick, helping identify the cross-sectional profile needed for the intended pulley arrangement. Vee belts are used to transmit rotational movement between shafts through frictional contact with matching grooved pulleys. The size range of 63 to 83 identifies this variant within the AX-section range and helps users select a belt according to the size requirements of the equipment. The belt may suit industrial machinery, manufacturing equipment, workshop installations and other drive systems engineered for the AX profile. Correct selection involves checking the section, size and pulley compatibility against the original equipment specifications. Before installation, examine the pulleys for damage or contamination, and ensure that alignment and tension meet the manufacturer's recommendations. Proper installation can help maintain suitable belt seating and limit avoidable wear. Routine checks for cracks, frayed edges, glazing and other visible deterioration are useful for preventive maintenance. Microbelts Vee Belt AX Section 13 mm Width, 8 mm Thickness (Size: 63 - 83) provides an identifiable option for procurement teams and technicians who need a replacement AX-section belt matching the stated dimensions and size range.

Type of Product : Vee Belt

Thickness : 8 mm

Width : 13 mm

Height : 8 mm

Section : AX

Ships within 30 days

Microbelts Vee Belt AX Section 13 mm Width, 8 mm Thickness (Size: 43 - 62)

By Microbelts

₹341 - ₹435

You save ₹149!

25.53% OFF

Microbelts Vee Belt AX Section 13 mm Width, 8 mm Thickness (Size: 43 - 62) is a belt-drive component for equipment that requires the AX-section profile and corresponding size. The specified cross-section measures 13 mm in width and 8 mm in thickness, providing useful dimensions for product identification and selection. Designed for use with compatible grooved pulleys, a Vee belt transfers rotational power through frictional engagement between the belt and pulley surfaces. The size range of 43 to 62 identifies this particular variant within the AX-section family, helping maintenance personnel distinguish it from belts intended for other drive dimensions. Potential applications include suitable industrial machines, workshop equipment and production systems that use an AX-profile belt. When selecting a replacement, verify the exact section and size listed in the machine manual or marked on the existing belt. Inspect the drive components for wear, confirm correct alignment and apply the specified tension before operation. These checks help support consistent belt engagement and may reduce premature deterioration. Periodic inspection is recommended to identify cracking, fraying, glazing or other visible signs of wear. Microbelts Vee Belt AX Section 13 mm Width, 8 mm Thickness (Size: 43 - 62) offers a clearly specified option for replacement and maintenance work on equipment designed for this AX-section belt profile.

Type of Product : Vee Belt

Thickness : 8 mm

Width : 13 mm

Height : 8 mm

Section : AX

Ships within 30 days

Microbelts Vee Belt AX Section 13 mm Width, 8 mm Thickness (Size: 23 - 42)

By Microbelts

₹235 - ₹329

You save ₹128!

27.96% OFF

Microbelts Vee Belt AX Section 13 mm Width, 8 mm Thickness (Size: 23 - 42) is intended for compatible power transmission arrangements that specify an AX-section belt. The product has a stated width of 13 mm and thickness of 8 mm, providing dimensional information for matching the belt with a suitable pulley system. Vee belts transfer rotational power through frictional contact with grooved pulleys, while the designated section helps identify the profile required for a particular drive. The size range of 23 to 42 distinguishes this belt from other AX-section options and supports accurate identification during replacement planning. This belt may be used in compatible industrial machinery, workshop equipment and other mechanisms designed for the AX profile. The AX designation should be checked carefully against the original belt and equipment documentation, as matching section dimensions alone may not confirm complete compatibility. Prior to installation, inspect the pulley grooves and confirm alignment and tension according to the manufacturer's guidance. Keeping the drive system in suitable condition can help reduce avoidable belt wear and interruptions. Regularly examine the belt for cracks, fraying, glazing or other deterioration. Microbelts Vee Belt AX Section 13 mm Width, 8 mm Thickness (Size: 23 - 42) provides a defined specification for users seeking an AX-section belt for a compatible mechanical transmission application.

Type of Product : Vee Belt

Thickness : 8 mm

Width : 13 mm

Height : 8 mm

Section : AX

Ships within 30 days

Microbelts Vee Belt AX Section 13 mm Width, 8 mm Thickness (Size: 84 - 98)

By Microbelts

₹518 - ₹612

You save ₹252!

29.15% OFF

Microbelts Vee Belt AX Section 13 mm Width, 8 mm Thickness (Size: 84 - 98) is intended for belt-driven equipment designed to use a compatible AX-section profile. It has a specified width of 13 mm and thickness of 8 mm, allowing users to compare its cross-sectional dimensions with the requirements of the installed drive. The Vee-belt design enables rotational power transmission through friction between the belt and appropriately grooved pulleys. The size range of 84 to 98 helps distinguish this variant from other AX-section selections and supports more precise identification when ordering a replacement belt. Suitable applications may include compatible industrial machinery, production equipment and workshop drive assemblies. For accurate selection, refer to the equipment manual or existing belt designation and verify that the required profile and size match. Check pulley condition and alignment before installation, and follow the manufacturer's guidance for tension adjustment. Correct fitting helps the belt remain seated in the pulley grooves and supports consistent drive operation. Regular inspections can reveal cracks, fraying, glazing or other visible damage that may warrant replacement. Microbelts Vee Belt AX Section 13 mm Width, 8 mm Thickness (Size: 84 - 98) is a practical catalog option for maintenance teams managing compatible AX-section belt drives.

Type of Product : Vee Belt

Thickness : 8 mm

Width : 13 mm

Height : 8 mm

Section : AX

Ships within 30 days

Microbelts Vee Belt BX Section 17 mm Width, 11 mm Thickness (Size: 62 - 99)

By Microbelts

₹601 - ₹907

You save ₹236!

28.16% OFF

Microbelts Vee Belt BX Section 17 mm Width, 11 mm Thickness (Size: 62 - 99) is intended for belt-driven machinery designed to use a compatible BX-section profile. Its specified dimensions of 17 mm width and 11 mm thickness help identify the belt cross-section for matching with suitable grooved pulleys. The belt supports mechanical power transmission by transferring rotational movement between shafts through frictional engagement. The size range of 62 to 99 distinguishes this option from other BX-section variants, making it easier to identify the required product when maintaining or replacing a belt in a compatible drive assembly. This belt may be used in suitable industrial machinery, workshop equipment and production systems that call for the BX profile. Accurate selection requires checking the required section and size against the original belt designation or equipment manual. Before fitting, examine the pulley grooves for wear and confirm correct alignment. Follow the equipment manufacturer's recommendations when setting belt tension. Regular condition checks can help detect cracking, fraying, glazing or other visible deterioration that may affect operation. Microbelts Vee Belt BX Section 17 mm Width, 11 mm Thickness (Size: 62 - 99) provides a defined specification for replacement and maintenance requirements where the listed dimensions and size range match the intended BX-section drive system.

Type of Product : Vee Belt

Thickness : 11 mm

Width : 17 mm

Height : 11 mm

Section : BX

Ships within 30 days

Microbelts Vee Belt BX Section 17 mm Width, 11 mm Thickness (Size: 41 - 60)

By Microbelts

₹447 - ₹589

You save ₹229!

27.97% OFF

Microbelts Vee Belt BX Section 17 mm Width, 11 mm Thickness (Size: 41 - 60) is designed for compatible power transmission systems that specify a BX-section belt. With a stated width of 17 mm and thickness of 11 mm, it provides the dimensional information needed to check the required belt profile. Vee belts transfer rotational power through frictional contact with suitable pulley grooves, helping drive connected mechanical components. The size range of 41 to 60 identifies this particular variant within the BX-section family and supports more precise selection during maintenance or replacement. Suitable uses may include compatible production machinery, industrial equipment, workshop installations and other belt-driven mechanisms. Before ordering, compare the belt designation with the machine documentation or the marking on the existing belt. Ensure that the section, size and pulley configuration are compatible rather than relying only on visual similarity. Inspect the drive components, verify alignment and set the tension as recommended by the equipment manufacturer. Periodic inspection for cracks, fraying, glazing and other signs of wear can help prevent avoidable interruptions. Microbelts Vee Belt BX Section 17 mm Width, 11 mm Thickness (Size: 41 - 60) is a clearly identified replacement option for equipment requiring the specified BX-section belt profile.

Type of Product : Vee Belt

Thickness : 11 mm

Width : 17 mm

Height : 11 mm

Section : BX

Ships within 30 days

Microbelts Vee Belt BX Section 17 mm Width, 11 mm Thickness (Size: 21 - 40)

By Microbelts

₹329 - ₹435

You save ₹163!

27.29% OFF

Microbelts Vee Belt BX Section 17 mm Width, 11 mm Thickness (Size: 21 - 40) is intended for compatible mechanical drives that require a BX-section Vee belt. Its listed dimensions are 17 mm in width and 11 mm in thickness, helping users identify the cross-section needed for the specified pulley arrangement. The Vee-belt design transfers rotational power through frictional contact with matching grooved pulleys. The BX designation identifies the required belt section, while the size range of 21 to 40 helps distinguish this option from other belts used in different drive configurations. This product may be suitable for compatible industrial machinery, workshop equipment and production systems designed for the BX profile. During selection, verify the exact section and size against the original belt marking or equipment documentation. Check the pulleys for wear and confirm proper alignment before fitting the replacement. Tension should be adjusted according to the equipment manufacturer's guidance to help maintain suitable engagement and avoid unnecessary strain. Routine inspections can reveal cracks, fraying, glazing or other visible deterioration. Microbelts Vee Belt BX Section 17 mm Width, 11 mm Thickness (Size: 21 - 40) provides a defined specification for maintenance and replacement tasks where a BX-section belt of the stated dimensions is required by the drive system.

Type of Product : Vee Belt

Thickness : 11 mm

Width : 17 mm

Height : 11 mm

Section : BX

Ships within 30 days

Microbelts Vee Belt CX Section 22 mm Width, 14 mm Thickness (Size: 65 - 84)

By Microbelts

₹919 - ₹1,120

You save ₹420!

28.84% OFF

Microbelts Vee Belt CX Section 22 mm Width, 14 mm Thickness (Size: 65 - 84) is designed for compatible belt-driven equipment that requires a CX-section Vee belt. With a specified width of 22 mm and thickness of 14 mm, it provides key dimensional information for selecting the appropriate belt profile. Vee belts transmit rotational power through friction between the belt and the grooves of matching pulleys. The size range of 65 to 84 distinguishes this option from other CX-section variants and supports identification when planning replacements for compatible mechanical drives. This belt may be suitable for industrial machinery, manufacturing equipment, workshop installations and other systems designed for the CX profile. Before ordering, check the required section and size using the equipment manual or the existing belt marking. Inspect the pulley grooves and confirm alignment before installation, then set the tension according to the manufacturer's instructions. Proper fitting supports suitable belt contact and can help reduce unnecessary wear. Periodic checks for cracks, fraying, glazing and other visible deterioration are useful for maintenance planning. Microbelts Vee Belt CX Section 22 mm Width, 14 mm Thickness (Size: 65 - 84) provides a clearly specified selection for replacement tasks where the CX-section profile and listed size range meet the equipment requirements.

Type of Product : Vee Belt

Thickness : 14 mm

Width : 22 mm

Height : 14 mm

Section : CX

Ships within 30 days

Microbelts Vee Belt CX Section 22 mm Width, 14 mm Thickness (Size: 45 - 64)

By Microbelts

₹707 - ₹919

You save ₹364!

28.35% OFF

Microbelts Vee Belt CX Section 22 mm Width, 14 mm Thickness (Size: 45 - 64) is intended for compatible machinery requiring a CX-section belt for mechanical power transmission. Its specified width of 22 mm and thickness of 14 mm provide the dimensional details needed to identify the belt profile. Vee belts operate through frictional contact with suitable grooved pulleys, transferring rotational movement between shafts in a mechanical drive. The size range of 45 to 64 identifies this particular CX-section selection and helps distinguish it from alternatives designed for other size requirements. Suitable applications may include compatible industrial equipment, workshop machinery, production systems and other belt-driven mechanisms that specify the CX profile. When selecting a replacement, verify both the size and section against the original belt marking or the equipment manual. Check pulley grooves for wear, confirm alignment and follow the manufacturer's recommendations for correct tension. These checks help support proper engagement and reduce avoidable wear associated with incorrect fitment. Regular condition inspections can reveal cracking, fraying, glazing or other visible damage. Microbelts Vee Belt CX Section 22 mm Width, 14 mm Thickness (Size: 45 - 64) offers a defined option for procurement and maintenance requirements where the CX-section profile and stated dimensions are compatible with the drive assembly.

Type of Product : Vee Belt

Thickness : 14 mm

Width : 22 mm

Height : 14 mm

Section : CX

Ships within 30 days

Microbelts Vee Belt CX Section 22 mm Width, 14 mm Thickness (Size: 25 - 44)

By Microbelts

₹400 - ₹695

You save ₹269!

27.91% OFF

Microbelts Vee Belt CX Section 22 mm Width, 14 mm Thickness (Size: 25 - 44) is designed for compatible power transmission systems that call for a CX-section Vee belt. The listed dimensions are 22 mm in width and 14 mm in thickness, helping users identify the required cross-section when checking pulley compatibility. Vee belts transmit rotational power through frictional contact with matching grooved pulleys. The CX designation identifies the specified belt section, while the size range of 25 to 44 distinguishes this product from other CX-section variants used in different drive arrangements. This belt may be considered for compatible industrial machinery, production equipment, workshops and other mechanical systems designed for the CX profile. Correct replacement selection should be based on the existing belt designation and the equipment manufacturer's specifications. Before fitting, inspect the pulley grooves and verify that the drive is properly aligned. Adjust belt tension as instructed by the manufacturer to support suitable seating and reduce unnecessary wear. Regularly check for cracks, fraying, glazing and other visible deterioration. Microbelts Vee Belt CX Section 22 mm Width, 14 mm Thickness (Size: 25 - 44) provides a clearly defined specification for maintenance teams sourcing a CX-section belt for a compatible drive system.

Type of Product : Vee Belt

Thickness : 14 mm

Width : 22 mm

Height : 14 mm

Section : CX

Page 1 of 1 results

Microbelts Classical Belts

Top Selling Microbelts Classical Belts Products Price List for November 2026