call
Have a question? Call us now at +91 9650660070
category menu Categories
search

Filter

Categories
Price Range
Min Price:
Max Price:
₹
-
₹
Discount

Nrb-Industrial Automotive Bearings

Showing 36 out of 36 products

Sort by
NRB Industrial Cam Follower Bearing, Inner Dia 30 mm, Outer Dia 62 mm, Width 28 mm, NATV1030EEX
sku-leadTime Ships within 4 days
NRB Industrial Cam Follower Bearing, Inner Dia 30 mm, Outer Dia 62 mm, Width 28 mm, NATV1030EEX
By NRB Industrial
₹955  
This NATV1030EEX Yoke Type Cam Follower of NRB Industrial is designed to run directly on surfaces like cams, ramps, and slide ways. This is often used as track rollers, cam followers, and in a very big selection of linear motion systems. So as to satisfy the operating conditions of heavy radial loads usually in the middle of repeated shocks. There's a lubrication groove on the outer ring, which prevents the introduction of impurities into the bearing scaling and galling of the bearing track. The convex (crowned) outer ring tolerating out-of-parallelism of contact surfaces. Crowned outer rings are used where the axis of the cam follower isn't parallel to the surface of the track or is skewed relative to the direction of travel. Outer ring with crowned outside surface supports high radial loads and reduces edge stresses which occur thanks to misalignment. Crowned outer rings are best suited in applications with curved or circular tracks. Cam followers offer the utmost dynamic and static load carrying capability, and anti-friction performance, in a very compact design. Cage-guided cam followers provide large space for grease, helpful in applications where re-lubrication is infrequent. this allows operations at high speed. Sealed type cam followers require low maintenance. This product accommodates a solid stud of high lastingness with an integral rib on one side, thick-walled outer ring, rolling elements set and a thrust washer pressed on to the opposite side of the stud. The assembly of those components forms an integrated unit. the world which is the race way for the rolling elements and also the abutment surfaces are hardened.
NRB Industrial Stud Type Cam Follower, Inner Dia 16 mm, Outer Dia 35 mm, Width 18 mm, KR35EEX
sku-leadTime Ships within 4 days
NRB Industrial Stud Type Cam Follower, Inner Dia 16 mm, Outer Dia 35 mm, Width 18 mm, KR35EEX
By NRB Industrial
₹1,415  
KR35EEX Stud Type Track Roller of NRB Industrial is designed to run directly on surfaces like cams, ramps, and slide ways. They're used as track rollers, cam followers, and in an exceedingly big selection of linear motion systems. so as to fulfill the operating conditions of heavy radial loads usually in the middle of repeated shocks. NIBL cam followers have a significant section outer ring of high strength steel hardened to 58 – 62 HR. There's a lubrication groove on the outer ring, which prevents the introduction of impurities into the bearing scaling and galling of the bearing track. The convex (crowned) outer ring tolerating out-of-parallelism of contact surfaces. Crowned outer rings are used where the axis of the cam follower isn't parallel to the surface of the track or is skewed relative to the direction of travel. Outer ring with crowned outside surface supports high radial loads and reduces edge stresses which occur thanks to misalignment. Crowned outer rings are best suited in applications with curved or circular tracks. NIBL offers cam followers with a crowned outer ring as a regular feature. Cam followers with cylindrical outer ring also are available, suffix X. To use cam followers with crowned outer ring as bearings, please consult NIBL. Cam followers with manpower of needles offer the most dynamic and static load carrying capability, and anti-friction performance, in a very compact design. Cage-guided cam followers provide large space for grease, helpful in applications where re-lubrication is infrequent. this allows operations at high speed. Sealed type cam followers require low maintenance. Their operating temperature is proscribed because of the grease and seal material which is between -30° C and +100° C. NIBL stud type cam followers contains a solid stud of high strength with an integral rib on one side, thick-walled outer ring, rolling elements set and a thrust washer pressed on to the opposite side of the stud. The assembly of those components forms an integrated unit. the world which is the race way for the rolling elements and also the abutment surfaces are hardened.
NRB Industrial Cam Follower Bearing, Inner Dia 20 mm, Outer Dia 47 mm, Width 25 mm, NUTR2047
sku-leadTime Ships within 4 days
NRB Industrial Cam Follower Bearing, Inner Dia 20 mm, Outer Dia 47 mm, Width 25 mm, NUTR2047
By NRB Industrial
₹2,359  
This NUTR2047 Yoke Type Cam Follower of NRB Industrial is designed to run directly on surfaces like cams, ramps, and slide ways. This is often used as track rollers, cam followers, and in a very big selection of linear motion systems. So as to satisfy the operating conditions of heavy radial loads usually in the middle of repeated shocks. There's a lubrication groove on the outer ring, which prevents the introduction of impurities into the bearing scaling and galling of the bearing track. The convex (crowned) outer ring tolerating out-of-parallelism of contact surfaces. Crowned outer rings are used where the axis of the cam follower isn't parallel to the surface of the track or is skewed relative to the direction of travel. Outer ring with crowned outside surface supports high radial loads and reduces edge stresses which occur thanks to misalignment. Crowned outer rings are best suited in applications with curved or circular tracks. Cam followers offer the utmost dynamic and static load carrying capability, and anti-friction performance, in a very compact design. Cage-guided cam followers provide large space for grease, helpful in applications where re-lubrication is infrequent. this allows operations at high speed. Sealed type cam followers require low maintenance. This product accommodates a solid stud of high lastingness with an integral rib on one side, thick-walled outer ring, rolling elements set and a thrust washer pressed on to the opposite side of the stud. The assembly of those components forms an integrated unit. the world which is the race way for the rolling elements and also the abutment surfaces are hardened.
NRB Industrial Stud Type Cam Follower, Inner Dia 8 mm, Outer Dia 19 mm, Width 11 mm, KRV19EE
sku-leadTime Ships within 3 days
NRB Industrial Stud Type Cam Follower, Inner Dia 8 mm, Outer Dia 19 mm, Width 11 mm, KRV19EE
By NRB Industrial
₹707  
KRV19EE Stud Type Track Roller of NRB Industrial is designed to run directly on surfaces like cams, ramps, and slide ways. They're used as track rollers, cam followers, and in an exceedingly big selection of linear motion systems. so as to fulfill the operating conditions of heavy radial loads usually in the middle of repeated shocks. NIBL cam followers have a significant section outer ring of high strength steel hardened to 58 – 62 HR. There's a lubrication groove on the outer ring, which prevents the introduction of impurities into the bearing scaling and galling of the bearing track. The convex (crowned) outer ring tolerating out-of-parallelism of contact surfaces. Crowned outer rings are used where the axis of the cam follower isn't parallel to the surface of the track or is skewed relative to the direction of travel. Outer ring with crowned outside surface supports high radial loads and reduces edge stresses which occur thanks to misalignment. Crowned outer rings are best suited in applications with curved or circular tracks. NIBL offers cam followers with a crowned outer ring as a regular feature. Cam followers with cylindrical outer ring also are available, suffix X. To use cam followers with crowned outer ring as bearings, please consult NIBL. Cam followers with manpower of needles offer the most dynamic and static load carrying capability, and anti-friction performance, in a very compact design. Cage-guided cam followers provide large space for grease, helpful in applications where re-lubrication is infrequent. this allows operations at high speed. Sealed type cam followers require low maintenance. Their operating temperature is proscribed because of the grease and seal material which is between -30° C and +100° C. NIBL stud type cam followers contains a solid stud of high strength with an integral rib on one side, thick-walled outer ring, rolling elements set and a thrust washer pressed on to the opposite side of the stud. The assembly of those components forms an integrated unit. the world which is the race way for the rolling elements and also the abutment surfaces are hardened.
NRB Industrial Cam Follower Bearing, Inner Dia 15 mm, Outer Dia 42 mm, Width 19 mm, NUTR1542X H0
sku-leadTime Ships within 3 days
NRB Industrial Cam Follower Bearing, Inner Dia 15 mm, Outer Dia 42 mm, Width 19 mm, NUTR1542X H0
By NRB Industrial
₹1,415  
This NUTR1542X H0 Yoke Type Cam Follower of NRB Industrial is designed to run directly on surfaces like cams, ramps, and slide ways. This is often used as track rollers, cam followers, and in a very big selection of linear motion systems. So as to satisfy the operating conditions of heavy radial loads usually in the middle of repeated shocks. There's a lubrication groove on the outer ring, which prevents the introduction of impurities into the bearing scaling and galling of the bearing track. The convex (crowned) outer ring tolerating out-of-parallelism of contact surfaces. Crowned outer rings are used where the axis of the cam follower isn't parallel to the surface of the track or is skewed relative to the direction of travel. Outer ring with crowned outside surface supports high radial loads and reduces edge stresses which occur thanks to misalignment. Crowned outer rings are best suited in applications with curved or circular tracks. Cam followers offer the utmost dynamic and static load carrying capability, and anti-friction performance, in a very compact design. Cage-guided cam followers provide large space for grease, helpful in applications where re-lubrication is infrequent. this allows operations at high speed. Sealed type cam followers require low maintenance. This product accommodates a solid stud of high lastingness with an integral rib on one side, thick-walled outer ring, rolling elements set and a thrust washer pressed on to the opposite side of the stud. The assembly of those components forms an integrated unit. the world which is the race way for the rolling elements and also the abutment surfaces are hardened.
NRB Industrial Stud Type Cam Follower, Inner Dia 24 mm, Outer Dia 62 mm, Width 29 mm, KRV62EE
sku-leadTime Ships within 3 days
NRB Industrial Stud Type Cam Follower, Inner Dia 24 mm, Outer Dia 62 mm, Width 29 mm, KRV62EE
By NRB Industrial
₹3,893  
KRV62EE Stud Type Track Roller of NRB Industrial is designed to run directly on surfaces like cams, ramps, and slide ways. They're used as track rollers, cam followers, and in an exceedingly big selection of linear motion systems. so as to fulfill the operating conditions of heavy radial loads usually in the middle of repeated shocks. NIBL cam followers have a significant section outer ring of high strength steel hardened to 58 – 62 HR. There's a lubrication groove on the outer ring, which prevents the introduction of impurities into the bearing scaling and galling of the bearing track. The convex (crowned) outer ring tolerating out-of-parallelism of contact surfaces. Crowned outer rings are used where the axis of the cam follower isn't parallel to the surface of the track or is skewed relative to the direction of travel. Outer ring with crowned outside surface supports high radial loads and reduces edge stresses which occur thanks to misalignment. Crowned outer rings are best suited in applications with curved or circular tracks. NIBL offers cam followers with a crowned outer ring as a regular feature. Cam followers with cylindrical outer ring also are available, suffix X. To use cam followers with crowned outer ring as bearings, please consult NIBL. Cam followers with manpower of needles offer the most dynamic and static load carrying capability, and anti-friction performance, in a very compact design. Cage-guided cam followers provide large space for grease, helpful in applications where re-lubrication is infrequent. this allows operations at high speed. Sealed type cam followers require low maintenance. Their operating temperature is proscribed because of the grease and seal material which is between -30° C and +100° C. NIBL stud type cam followers contains a solid stud of high strength with an integral rib on one side, thick-walled outer ring, rolling elements set and a thrust washer pressed on to the opposite side of the stud. The assembly of those components forms an integrated unit. the world which is the race way for the rolling elements and also the abutment surfaces are hardened.
NRB Industrial Stud Type Cam Follower, Inner Dia 18 mm, Outer Dia 40 mm, Width 20 mm, KRV40EE
sku-leadTime Ships within 5 days
NRB Industrial Stud Type Cam Follower, Inner Dia 18 mm, Outer Dia 40 mm, Width 20 mm, KRV40EE
By NRB Industrial
₹1,887  
KRV40EE Stud Type Track Roller of NRB Industrial is designed to run directly on surfaces like cams, ramps, and slide ways. They're used as track rollers, cam followers, and in an exceedingly big selection of linear motion systems. so as to fulfill the operating conditions of heavy radial loads usually in the middle of repeated shocks. NIBL cam followers have a significant section outer ring of high strength steel hardened to 58 – 62 HR. There's a lubrication groove on the outer ring, which prevents the introduction of impurities into the bearing scaling and galling of the bearing track. The convex (crowned) outer ring tolerating out-of-parallelism of contact surfaces. Crowned outer rings are used where the axis of the cam follower isn't parallel to the surface of the track or is skewed relative to the direction of travel. Outer ring with crowned outside surface supports high radial loads and reduces edge stresses which occur thanks to misalignment. Crowned outer rings are best suited in applications with curved or circular tracks. NIBL offers cam followers with a crowned outer ring as a regular feature. Cam followers with cylindrical outer ring also are available, suffix X. To use cam followers with crowned outer ring as bearings, please consult NIBL. Cam followers with manpower of needles offer the most dynamic and static load carrying capability, and anti-friction performance, in a very compact design. Cage-guided cam followers provide large space for grease, helpful in applications where re-lubrication is infrequent. this allows operations at high speed. Sealed type cam followers require low maintenance. Their operating temperature is proscribed because of the grease and seal material which is between -30° C and +100° C. NIBL stud type cam followers contains a solid stud of high strength with an integral rib on one side, thick-walled outer ring, rolling elements set and a thrust washer pressed on to the opposite side of the stud. The assembly of those components forms an integrated unit. the world which is the race way for the rolling elements and also the abutment surfaces are hardened.
NRB Industrial Stud Type Cam Follower, Inner Dia 16 mm, Outer Dia 35 mm, Width 18 mm, KRV35EE
sku-leadTime Ships within 2 days
NRB Industrial Stud Type Cam Follower, Inner Dia 16 mm, Outer Dia 35 mm, Width 18 mm, KRV35EE
By NRB Industrial
₹1,533  
KRV35EE Stud Type Track Roller of NRB Industrial is designed to run directly on surfaces like cams, ramps, and slide ways. They're used as track rollers, cam followers, and in an exceedingly big selection of linear motion systems. so as to fulfill the operating conditions of heavy radial loads usually in the middle of repeated shocks. NIBL cam followers have a significant section outer ring of high strength steel hardened to 58 – 62 HR. There's a lubrication groove on the outer ring, which prevents the introduction of impurities into the bearing scaling and galling of the bearing track. The convex (crowned) outer ring tolerating out-of-parallelism of contact surfaces. Crowned outer rings are used where the axis of the cam follower isn't parallel to the surface of the track or is skewed relative to the direction of travel. Outer ring with crowned outside surface supports high radial loads and reduces edge stresses which occur thanks to misalignment. Crowned outer rings are best suited in applications with curved or circular tracks. NIBL offers cam followers with a crowned outer ring as a regular feature. Cam followers with cylindrical outer ring also are available, suffix X. To use cam followers with crowned outer ring as bearings, please consult NIBL. Cam followers with manpower of needles offer the most dynamic and static load carrying capability, and anti-friction performance, in a very compact design. Cage-guided cam followers provide large space for grease, helpful in applications where re-lubrication is infrequent. this allows operations at high speed. Sealed type cam followers require low maintenance. Their operating temperature is proscribed because of the grease and seal material which is between -30° C and +100° C. NIBL stud type cam followers contains a solid stud of high strength with an integral rib on one side, thick-walled outer ring, rolling elements set and a thrust washer pressed on to the opposite side of the stud. The assembly of those components forms an integrated unit. the world which is the race way for the rolling elements and also the abutment surfaces are hardened.
NRB Industrial Stud Type Cam Follower, Inner Dia 12 mm, Outer Dia 32 mm, Width 14 mm, KRV32EE
sku-leadTime Ships within 5 days
NRB Industrial Stud Type Cam Follower, Inner Dia 12 mm, Outer Dia 32 mm, Width 14 mm, KRV32EE
By NRB Industrial
₹1,143  
KRV32EE Stud Type Track Roller of NRB Industrial is designed to run directly on surfaces like cams, ramps, and slide ways. They're used as track rollers, cam followers, and in an exceedingly big selection of linear motion systems. so as to fulfill the operating conditions of heavy radial loads usually in the middle of repeated shocks. NIBL cam followers have a significant section outer ring of high strength steel hardened to 58 – 62 HR. There's a lubrication groove on the outer ring, which prevents the introduction of impurities into the bearing scaling and galling of the bearing track. The convex (crowned) outer ring tolerating out-of-parallelism of contact surfaces. Crowned outer rings are used where the axis of the cam follower isn't parallel to the surface of the track or is skewed relative to the direction of travel. Outer ring with crowned outside surface supports high radial loads and reduces edge stresses which occur thanks to misalignment. Crowned outer rings are best suited in applications with curved or circular tracks. NIBL offers cam followers with a crowned outer ring as a regular feature. Cam followers with cylindrical outer ring also are available, suffix X. To use cam followers with crowned outer ring as bearings, please consult NIBL. Cam followers with manpower of needles offer the most dynamic and static load carrying capability, and anti-friction performance, in a very compact design. Cage-guided cam followers provide large space for grease, helpful in applications where re-lubrication is infrequent. this allows operations at high speed. Sealed type cam followers require low maintenance. Their operating temperature is proscribed because of the grease and seal material which is between -30° C and +100° C. NIBL stud type cam followers contains a solid stud of high strength with an integral rib on one side, thick-walled outer ring, rolling elements set and a thrust washer pressed on to the opposite side of the stud. The assembly of those components forms an integrated unit. the world which is the race way for the rolling elements and also the abutment surfaces are hardened.
NRB Industrial Stud Type Cam Follower, Inner Dia 12 mm, Outer Dia 32 mm, Width 14 mm, KRV32
sku-leadTime Ships within 3 days
NRB Industrial Stud Type Cam Follower, Inner Dia 12 mm, Outer Dia 32 mm, Width 14 mm, KRV32
By NRB Industrial
₹1,143  
KRV32 Stud Type Track Roller of NRB Industrial is designed to run directly on surfaces like cams, ramps, and slide ways. They're used as track rollers, cam followers, and in an exceedingly big selection of linear motion systems. so as to fulfill the operating conditions of heavy radial loads usually in the middle of repeated shocks. NIBL cam followers have a significant section outer ring of high strength steel hardened to 58 – 62 HR. There's a lubrication groove on the outer ring, which prevents the introduction of impurities into the bearing scaling and galling of the bearing track. The convex (crowned) outer ring tolerating out-of-parallelism of contact surfaces. Crowned outer rings are used where the axis of the cam follower isn't parallel to the surface of the track or is skewed relative to the direction of travel. Outer ring with crowned outside surface supports high radial loads and reduces edge stresses which occur thanks to misalignment. Crowned outer rings are best suited in applications with curved or circular tracks. NIBL offers cam followers with a crowned outer ring as a regular feature. Cam followers with cylindrical outer ring also are available, suffix X. To use cam followers with crowned outer ring as bearings, please consult NIBL. Cam followers with manpower of needles offer the most dynamic and static load carrying capability, and anti-friction performance, in a very compact design. Cage-guided cam followers provide large space for grease, helpful in applications where re-lubrication is infrequent. this allows operations at high speed. Sealed type cam followers require low maintenance. Their operating temperature is proscribed because of the grease and seal material which is between -30° C and +100° C. NIBL stud type cam followers contains a solid stud of high strength with an integral rib on one side, thick-walled outer ring, rolling elements set and a thrust washer pressed on to the opposite side of the stud. The assembly of those components forms an integrated unit. the world which is the race way for the rolling elements and also the abutment surfaces are hardened.
NRB Industrial Stud Type Cam Follower, Inner Dia 12 mm, Outer Dia 30 mm, Width 14 mm, KRV30EE
sku-leadTime Ships within 5 days
NRB Industrial Stud Type Cam Follower, Inner Dia 12 mm, Outer Dia 30 mm, Width 14 mm, KRV30EE
By NRB Industrial
₹1,002  
KRV30EE Stud Type Track Roller of NRB Industrial is designed to run directly on surfaces like cams, ramps, and slide ways. They're used as track rollers, cam followers, and in an exceedingly big selection of linear motion systems. so as to fulfill the operating conditions of heavy radial loads usually in the middle of repeated shocks. NIBL cam followers have a significant section outer ring of high strength steel hardened to 58 – 62 HR. There's a lubrication groove on the outer ring, which prevents the introduction of impurities into the bearing scaling and galling of the bearing track. The convex (crowned) outer ring tolerating out-of-parallelism of contact surfaces. Crowned outer rings are used where the axis of the cam follower isn't parallel to the surface of the track or is skewed relative to the direction of travel. Outer ring with crowned outside surface supports high radial loads and reduces edge stresses which occur thanks to misalignment. Crowned outer rings are best suited in applications with curved or circular tracks. NIBL offers cam followers with a crowned outer ring as a regular feature. Cam followers with cylindrical outer ring also are available, suffix X. To use cam followers with crowned outer ring as bearings, please consult NIBL. Cam followers with manpower of needles offer the most dynamic and static load carrying capability, and anti-friction performance, in a very compact design. Cage-guided cam followers provide large space for grease, helpful in applications where re-lubrication is infrequent. this allows operations at high speed. Sealed type cam followers require low maintenance. Their operating temperature is proscribed because of the grease and seal material which is between -30° C and +100° C. NIBL stud type cam followers contains a solid stud of high strength with an integral rib on one side, thick-walled outer ring, rolling elements set and a thrust washer pressed on to the opposite side of the stud. The assembly of those components forms an integrated unit. the world which is the race way for the rolling elements and also the abutment surfaces are hardened.
NRB Industrial Stud Type Cam Follower, Inner Dia 10 mm, Outer Dia 26 mm, Width 12 mm, KRV26EE
sku-leadTime Ships within 3 days
NRB Industrial Stud Type Cam Follower, Inner Dia 10 mm, Outer Dia 26 mm, Width 12 mm, KRV26EE
By NRB Industrial
₹801  
KRV26EE Stud Type Track Roller of NRB Industrial is designed to run directly on surfaces like cams, ramps, and slide ways. They're used as track rollers, cam followers, and in an exceedingly big selection of linear motion systems. so as to fulfill the operating conditions of heavy radial loads usually in the middle of repeated shocks. NIBL cam followers have a significant section outer ring of high strength steel hardened to 58 – 62 HR. There's a lubrication groove on the outer ring, which prevents the introduction of impurities into the bearing scaling and galling of the bearing track. The convex (crowned) outer ring tolerating out-of-parallelism of contact surfaces. Crowned outer rings are used where the axis of the cam follower isn't parallel to the surface of the track or is skewed relative to the direction of travel. Outer ring with crowned outside surface supports high radial loads and reduces edge stresses which occur thanks to misalignment. Crowned outer rings are best suited in applications with curved or circular tracks. NIBL offers cam followers with a crowned outer ring as a regular feature. Cam followers with cylindrical outer ring also are available, suffix X. To use cam followers with crowned outer ring as bearings, please consult NIBL. Cam followers with manpower of needles offer the most dynamic and static load carrying capability, and anti-friction performance, in a very compact design. Cage-guided cam followers provide large space for grease, helpful in applications where re-lubrication is infrequent. this allows operations at high speed. Sealed type cam followers require low maintenance. Their operating temperature is proscribed because of the grease and seal material which is between -30° C and +100° C. NIBL stud type cam followers contains a solid stud of high strength with an integral rib on one side, thick-walled outer ring, rolling elements set and a thrust washer pressed on to the opposite side of the stud. The assembly of those components forms an integrated unit. the world which is the race way for the rolling elements and also the abutment surfaces are hardened.
NRB Industrial Stud Type Cam Follower, Inner Dia 10 mm, Outer Dia 22 mm, Width 12 mm, KRV22EE
sku-leadTime Ships within 5 days
NRB Industrial Stud Type Cam Follower, Inner Dia 10 mm, Outer Dia 22 mm, Width 12 mm, KRV22EE
By NRB Industrial
₹754  
KRV22EE Stud Type Track Roller of NRB Industrial is designed to run directly on surfaces like cams, ramps, and slide ways. They're used as track rollers, cam followers, and in an exceedingly big selection of linear motion systems. so as to fulfill the operating conditions of heavy radial loads usually in the middle of repeated shocks. NIBL cam followers have a significant section outer ring of high strength steel hardened to 58 – 62 HR. There's a lubrication groove on the outer ring, which prevents the introduction of impurities into the bearing scaling and galling of the bearing track. The convex (crowned) outer ring tolerating out-of-parallelism of contact surfaces. Crowned outer rings are used where the axis of the cam follower isn't parallel to the surface of the track or is skewed relative to the direction of travel. Outer ring with crowned outside surface supports high radial loads and reduces edge stresses which occur thanks to misalignment. Crowned outer rings are best suited in applications with curved or circular tracks. NIBL offers cam followers with a crowned outer ring as a regular feature. Cam followers with cylindrical outer ring also are available, suffix X. To use cam followers with crowned outer ring as bearings, please consult NIBL. Cam followers with manpower of needles offer the most dynamic and static load carrying capability, and anti-friction performance, in a very compact design. Cage-guided cam followers provide large space for grease, helpful in applications where re-lubrication is infrequent. this allows operations at high speed. Sealed type cam followers require low maintenance. Their operating temperature is proscribed because of the grease and seal material which is between -30° C and +100° C. NIBL stud type cam followers contains a solid stud of high strength with an integral rib on one side, thick-walled outer ring, rolling elements set and a thrust washer pressed on to the opposite side of the stud. The assembly of those components forms an integrated unit. the world which is the race way for the rolling elements and also the abutment surfaces are hardened.
NRB Industrial Stud Type Cam Follower, Inner Dia 6 mm, Outer Dia 16 mm, Width 11 mm, KRV16EE
sku-leadTime Ships within 5 days
NRB Industrial Stud Type Cam Follower, Inner Dia 6 mm, Outer Dia 16 mm, Width 11 mm, KRV16EE
By NRB Industrial
₹683  
KRV16EE Stud Type Track Roller of NRB Industrial is designed to run directly on surfaces like cams, ramps, and slide ways. They're used as track rollers, cam followers, and in an exceedingly big selection of linear motion systems. so as to fulfill the operating conditions of heavy radial loads usually in the middle of repeated shocks. NIBL cam followers have a significant section outer ring of high strength steel hardened to 58 – 62 HR. There's a lubrication groove on the outer ring, which prevents the introduction of impurities into the bearing scaling and galling of the bearing track. The convex (crowned) outer ring tolerating out-of-parallelism of contact surfaces. Crowned outer rings are used where the axis of the cam follower isn't parallel to the surface of the track or is skewed relative to the direction of travel. Outer ring with crowned outside surface supports high radial loads and reduces edge stresses which occur thanks to misalignment. Crowned outer rings are best suited in applications with curved or circular tracks. NIBL offers cam followers with a crowned outer ring as a regular feature. Cam followers with cylindrical outer ring also are available, suffix X. To use cam followers with crowned outer ring as bearings, please consult NIBL. Cam followers with manpower of needles offer the most dynamic and static load carrying capability, and anti-friction performance, in a very compact design. Cage-guided cam followers provide large space for grease, helpful in applications where re-lubrication is infrequent. this allows operations at high speed. Sealed type cam followers require low maintenance. Their operating temperature is proscribed because of the grease and seal material which is between -30° C and +100° C. NIBL stud type cam followers contains a solid stud of high strength with an integral rib on one side, thick-walled outer ring, rolling elements set and a thrust washer pressed on to the opposite side of the stud. The assembly of those components forms an integrated unit. the world which is the race way for the rolling elements and also the abutment surfaces are hardened.
NRB Industrial Stud Type Cam Follower, Inner Dia 24 mm, Outer Dia 62 mm, Width 29 mm, KR62EE
sku-leadTime Ships within 4 days
NRB Industrial Stud Type Cam Follower, Inner Dia 24 mm, Outer Dia 62 mm, Width 29 mm, KR62EE
By NRB Industrial
₹4,129  
KR62EE Stud Type Track Roller of NRB Industrial is designed to run directly on surfaces like cams, ramps, and slide ways. They're used as track rollers, cam followers, and in an exceedingly big selection of linear motion systems. so as to fulfill the operating conditions of heavy radial loads usually in the middle of repeated shocks. NIBL cam followers have a significant section outer ring of high strength steel hardened to 58 – 62 HR. There's a lubrication groove on the outer ring, which prevents the introduction of impurities into the bearing scaling and galling of the bearing track. The convex (crowned) outer ring tolerating out-of-parallelism of contact surfaces. Crowned outer rings are used where the axis of the cam follower isn't parallel to the surface of the track or is skewed relative to the direction of travel. Outer ring with crowned outside surface supports high radial loads and reduces edge stresses which occur thanks to misalignment. Crowned outer rings are best suited in applications with curved or circular tracks. NIBL offers cam followers with a crowned outer ring as a regular feature. Cam followers with cylindrical outer ring also are available, suffix X. To use cam followers with crowned outer ring as bearings, please consult NIBL. Cam followers with manpower of needles offer the most dynamic and static load carrying capability, and anti-friction performance, in a very compact design. Cage-guided cam followers provide large space for grease, helpful in applications where re-lubrication is infrequent. this allows operations at high speed. Sealed type cam followers require low maintenance. Their operating temperature is proscribed because of the grease and seal material which is between -30° C and +100° C. NIBL stud type cam followers contains a solid stud of high strength with an integral rib on one side, thick-walled outer ring, rolling elements set and a thrust washer pressed on to the opposite side of the stud. The assembly of those components forms an integrated unit. the world which is the race way for the rolling elements and also the abutment surfaces are hardened.
NRB Industrial Stud Type Cam Follower, Inner Dia 20 mm, Outer Dia 52 mm, Width 24 mm, KR52EE
sku-leadTime Ships within 3 days
NRB Industrial Stud Type Cam Follower, Inner Dia 20 mm, Outer Dia 52 mm, Width 24 mm, KR52EE
By NRB Industrial
₹3,185   ₹3,408
You save ₹223!
6.54% OFF
KR52EE Stud Type Track Roller of NRB Industrial is designed to run directly on surfaces like cams, ramps, and slide ways. They're used as track rollers, cam followers, and in an exceedingly big selection of linear motion systems. so as to fulfill the operating conditions of heavy radial loads usually in the middle of repeated shocks. NIBL cam followers have a significant section outer ring of high strength steel hardened to 58 – 62 HR. There's a lubrication groove on the outer ring, which prevents the introduction of impurities into the bearing scaling and galling of the bearing track. The convex (crowned) outer ring tolerating out-of-parallelism of contact surfaces. Crowned outer rings are used where the axis of the cam follower isn't parallel to the surface of the track or is skewed relative to the direction of travel. Outer ring with crowned outside surface supports high radial loads and reduces edge stresses which occur thanks to misalignment. Crowned outer rings are best suited in applications with curved or circular tracks. NIBL offers cam followers with a crowned outer ring as a regular feature. Cam followers with cylindrical outer ring also are available, suffix X. To use cam followers with crowned outer ring as bearings, please consult NIBL. Cam followers with manpower of needles offer the most dynamic and static load carrying capability, and anti-friction performance, in a very compact design. Cage-guided cam followers provide large space for grease, helpful in applications where re-lubrication is infrequent. this allows operations at high speed. Sealed type cam followers require low maintenance. Their operating temperature is proscribed because of the grease and seal material which is between -30° C and +100° C. NIBL stud type cam followers contains a solid stud of high strength with an integral rib on one side, thick-walled outer ring, rolling elements set and a thrust washer pressed on to the opposite side of the stud. The assembly of those components forms an integrated unit. the world which is the race way for the rolling elements and also the abutment surfaces are hardened.
NRB Industrial Stud Type Cam Follower, Inner Dia 18 mm, Outer Dia 40 mm, Width 22 mm, KR40EEX
sku-leadTime Ships within 4 days
NRB Industrial Stud Type Cam Follower, Inner Dia 18 mm, Outer Dia 40 mm, Width 22 mm, KR40EEX
By NRB Industrial
₹1,651  
KR40EEX Stud Type Track Roller of NRB Industrial is designed to run directly on surfaces like cams, ramps, and slide ways. They're used as track rollers, cam followers, and in an exceedingly big selection of linear motion systems. so as to fulfill the operating conditions of heavy radial loads usually in the middle of repeated shocks. NIBL cam followers have a significant section outer ring of high strength steel hardened to 58 – 62 HR. There's a lubrication groove on the outer ring, which prevents the introduction of impurities into the bearing scaling and galling of the bearing track. The convex (crowned) outer ring tolerating out-of-parallelism of contact surfaces. Crowned outer rings are used where the axis of the cam follower isn't parallel to the surface of the track or is skewed relative to the direction of travel. Outer ring with crowned outside surface supports high radial loads and reduces edge stresses which occur thanks to misalignment. Crowned outer rings are best suited in applications with curved or circular tracks. NIBL offers cam followers with a crowned outer ring as a regular feature. Cam followers with cylindrical outer ring also are available, suffix X. To use cam followers with crowned outer ring as bearings, please consult NIBL. Cam followers with manpower of needles offer the most dynamic and static load carrying capability, and anti-friction performance, in a very compact design. Cage-guided cam followers provide large space for grease, helpful in applications where re-lubrication is infrequent. this allows operations at high speed. Sealed type cam followers require low maintenance. Their operating temperature is proscribed because of the grease and seal material which is between -30° C and +100° C. NIBL stud type cam followers contains a solid stud of high strength with an integral rib on one side, thick-walled outer ring, rolling elements set and a thrust washer pressed on to the opposite side of the stud. The assembly of those components forms an integrated unit. the world which is the race way for the rolling elements and also the abutment surfaces are hardened.
NRB Industrial Stud Type Cam Follower, Inner Dia 18 mm, Outer Dia 40 mm, Width 20 mm, KR40EE
sku-leadTime Ships within 5 days
NRB Industrial Stud Type Cam Follower, Inner Dia 18 mm, Outer Dia 40 mm, Width 20 mm, KR40EE
By NRB Industrial
₹1,651  
KR40EE Stud Type Track Roller of NRB Industrial is designed to run directly on surfaces like cams, ramps, and slide ways. They're used as track rollers, cam followers, and in an exceedingly big selection of linear motion systems. so as to fulfill the operating conditions of heavy radial loads usually in the middle of repeated shocks. NIBL cam followers have a significant section outer ring of high strength steel hardened to 58 – 62 HR. There's a lubrication groove on the outer ring, which prevents the introduction of impurities into the bearing scaling and galling of the bearing track. The convex (crowned) outer ring tolerating out-of-parallelism of contact surfaces. Crowned outer rings are used where the axis of the cam follower isn't parallel to the surface of the track or is skewed relative to the direction of travel. Outer ring with crowned outside surface supports high radial loads and reduces edge stresses which occur thanks to misalignment. Crowned outer rings are best suited in applications with curved or circular tracks. NIBL offers cam followers with a crowned outer ring as a regular feature. Cam followers with cylindrical outer ring also are available, suffix X. To use cam followers with crowned outer ring as bearings, please consult NIBL. Cam followers with manpower of needles offer the most dynamic and static load carrying capability, and anti-friction performance, in a very compact design. Cage-guided cam followers provide large space for grease, helpful in applications where re-lubrication is infrequent. this allows operations at high speed. Sealed type cam followers require low maintenance. Their operating temperature is proscribed because of the grease and seal material which is between -30° C and +100° C. NIBL stud type cam followers contains a solid stud of high strength with an integral rib on one side, thick-walled outer ring, rolling elements set and a thrust washer pressed on to the opposite side of the stud. The assembly of those components forms an integrated unit. the world which is the race way for the rolling elements and also the abutment surfaces are hardened.
NRB Industrial Stud Type Cam Follower, Inner Dia 16 mm, Outer Dia 35 mm, Width 20 mm, KR35EE
sku-leadTime Ships within 4 days
NRB Industrial Stud Type Cam Follower, Inner Dia 16 mm, Outer Dia 35 mm, Width 20 mm, KR35EE
By NRB Industrial
₹1,415  
KR35EE Stud Type Track Roller of NRB Industrial is designed to run directly on surfaces like cams, ramps, and slide ways. They're used as track rollers, cam followers, and in an exceedingly big selection of linear motion systems. so as to fulfill the operating conditions of heavy radial loads usually in the middle of repeated shocks. NIBL cam followers have a significant section outer ring of high strength steel hardened to 58 – 62 HR. There's a lubrication groove on the outer ring, which prevents the introduction of impurities into the bearing scaling and galling of the bearing track. The convex (crowned) outer ring tolerating out-of-parallelism of contact surfaces. Crowned outer rings are used where the axis of the cam follower isn't parallel to the surface of the track or is skewed relative to the direction of travel. Outer ring with crowned outside surface supports high radial loads and reduces edge stresses which occur thanks to misalignment. Crowned outer rings are best suited in applications with curved or circular tracks. NIBL offers cam followers with a crowned outer ring as a regular feature. Cam followers with cylindrical outer ring also are available, suffix X. To use cam followers with crowned outer ring as bearings, please consult NIBL. Cam followers with manpower of needles offer the most dynamic and static load carrying capability, and anti-friction performance, in a very compact design. Cage-guided cam followers provide large space for grease, helpful in applications where re-lubrication is infrequent. this allows operations at high speed. Sealed type cam followers require low maintenance. Their operating temperature is proscribed because of the grease and seal material which is between -30° C and +100° C. NIBL stud type cam followers contains a solid stud of high strength with an integral rib on one side, thick-walled outer ring, rolling elements set and a thrust washer pressed on to the opposite side of the stud. The assembly of those components forms an integrated unit. the world which is the race way for the rolling elements and also the abutment surfaces are hardened.
NRB Industrial Stud Type Cam Follower, Inner Dia 12 mm, Outer Dia 32 mm, Width 14 mm, KR32EE
sku-leadTime Ships within 3 days
NRB Industrial Stud Type Cam Follower, Inner Dia 12 mm, Outer Dia 32 mm, Width 14 mm, KR32EE
By NRB Industrial
₹1,049  
KR32EE Stud Type Track Roller of NRB Industrial is designed to run directly on surfaces like cams, ramps, and slide ways. They're used as track rollers, cam followers, and in an exceedingly big selection of linear motion systems. so as to fulfill the operating conditions of heavy radial loads usually in the middle of repeated shocks. NIBL cam followers have a significant section outer ring of high strength steel hardened to 58 – 62 HR. There's a lubrication groove on the outer ring, which prevents the introduction of impurities into the bearing scaling and galling of the bearing track. The convex (crowned) outer ring tolerating out-of-parallelism of contact surfaces. Crowned outer rings are used where the axis of the cam follower isn't parallel to the surface of the track or is skewed relative to the direction of travel. Outer ring with crowned outside surface supports high radial loads and reduces edge stresses which occur thanks to misalignment. Crowned outer rings are best suited in applications with curved or circular tracks. NIBL offers cam followers with a crowned outer ring as a regular feature. Cam followers with cylindrical outer ring also are available, suffix X. To use cam followers with crowned outer ring as bearings, please consult NIBL. Cam followers with manpower of needles offer the most dynamic and static load carrying capability, and anti-friction performance, in a very compact design. Cage-guided cam followers provide large space for grease, helpful in applications where re-lubrication is infrequent. this allows operations at high speed. Sealed type cam followers require low maintenance. Their operating temperature is proscribed because of the grease and seal material which is between -30° C and +100° C. NIBL stud type cam followers contains a solid stud of high strength with an integral rib on one side, thick-walled outer ring, rolling elements set and a thrust washer pressed on to the opposite side of the stud. The assembly of those components forms an integrated unit. the world which is the race way for the rolling elements and also the abutment surfaces are hardened.
NRB Industrial Stud Type Cam Follower, Inner Dia 15 mm, Outer Dia 32 mm, Width 15 mm, KR32
sku-leadTime Ships within 3 days
NRB Industrial Stud Type Cam Follower, Inner Dia 15 mm, Outer Dia 32 mm, Width 15 mm, KR32
By NRB Industrial
₹1,049   ₹1,161
You save ₹112!
9.66% OFF
KR32 Stud Type Track Roller of NRB Industrial is designed to run directly on surfaces like cams, ramps, and slide ways. They're used as track rollers, cam followers, and in an exceedingly big selection of linear motion systems. so as to fulfill the operating conditions of heavy radial loads usually in the middle of repeated shocks. NIBL cam followers have a significant section outer ring of high strength steel hardened to 58 – 62 HR. There's a lubrication groove on the outer ring, which prevents the introduction of impurities into the bearing scaling and galling of the bearing track. The convex (crowned) outer ring tolerating out-of-parallelism of contact surfaces. Crowned outer rings are used where the axis of the cam follower isn't parallel to the surface of the track or is skewed relative to the direction of travel. Outer ring with crowned outside surface supports high radial loads and reduces edge stresses which occur thanks to misalignment. Crowned outer rings are best suited in applications with curved or circular tracks. NIBL offers cam followers with a crowned outer ring as a regular feature. Cam followers with cylindrical outer ring also are available, suffix X. To use cam followers with crowned outer ring as bearings, please consult NIBL. Cam followers with manpower of needles offer the most dynamic and static load carrying capability, and anti-friction performance, in a very compact design. Cage-guided cam followers provide large space for grease, helpful in applications where re-lubrication is infrequent. this allows operations at high speed. Sealed type cam followers require low maintenance. Their operating temperature is proscribed because of the grease and seal material which is between -30° C and +100° C. NIBL stud type cam followers contains a solid stud of high strength with an integral rib on one side, thick-walled outer ring, rolling elements set and a thrust washer pressed on to the opposite side of the stud. The assembly of those components forms an integrated unit. the world which is the race way for the rolling elements and also the abutment surfaces are hardened.
NRB Industrial Stud Type Cam Follower, Inner Dia 12 mm, Outer Dia 30 mm, Width 14 mm, KR30EE
sku-leadTime Ships within 4 days
NRB Industrial Stud Type Cam Follower, Inner Dia 12 mm, Outer Dia 30 mm, Width 14 mm, KR30EE
By NRB Industrial
₹1,002  
KR30EE Stud Type Track Roller of NRB Industrial is designed to run directly on surfaces like cams, ramps, and slide ways. They're used as track rollers, cam followers, and in an exceedingly big selection of linear motion systems. so as to fulfill the operating conditions of heavy radial loads usually in the middle of repeated shocks. NIBL cam followers have a significant section outer ring of high strength steel hardened to 58 – 62 HR. There's a lubrication groove on the outer ring, which prevents the introduction of impurities into the bearing scaling and galling of the bearing track. The convex (crowned) outer ring tolerating out-of-parallelism of contact surfaces. Crowned outer rings are used where the axis of the cam follower isn't parallel to the surface of the track or is skewed relative to the direction of travel. Outer ring with crowned outside surface supports high radial loads and reduces edge stresses which occur thanks to misalignment. Crowned outer rings are best suited in applications with curved or circular tracks. NIBL offers cam followers with a crowned outer ring as a regular feature. Cam followers with cylindrical outer ring also are available, suffix X. To use cam followers with crowned outer ring as bearings, please consult NIBL. Cam followers with manpower of needles offer the most dynamic and static load carrying capability, and anti-friction performance, in a very compact design. Cage-guided cam followers provide large space for grease, helpful in applications where re-lubrication is infrequent. this allows operations at high speed. Sealed type cam followers require low maintenance. Their operating temperature is proscribed because of the grease and seal material which is between -30° C and +100° C. NIBL stud type cam followers contains a solid stud of high strength with an integral rib on one side, thick-walled outer ring, rolling elements set and a thrust washer pressed on to the opposite side of the stud. The assembly of those components forms an integrated unit. the world which is the race way for the rolling elements and also the abutment surfaces are hardened.
NRB Industrial Stud Type Cam Follower, Inner Dia 10 mm, Outer Dia 26 mm, Width 12 mm, KR26EE
sku-leadTime Ships within 3 days
NRB Industrial Stud Type Cam Follower, Inner Dia 10 mm, Outer Dia 26 mm, Width 12 mm, KR26EE
By NRB Industrial
₹801  
KR26EE Stud Type Track Roller of NRB Industrial is designed to run directly on surfaces like cams, ramps, and slide ways. They're used as track rollers, cam followers, and in an exceedingly big selection of linear motion systems. so as to fulfill the operating conditions of heavy radial loads usually in the middle of repeated shocks. NIBL cam followers have a significant section outer ring of high strength steel hardened to 58 – 62 HR. There's a lubrication groove on the outer ring, which prevents the introduction of impurities into the bearing scaling and galling of the bearing track. The convex (crowned) outer ring tolerating out-of-parallelism of contact surfaces. Crowned outer rings are used where the axis of the cam follower isn't parallel to the surface of the track or is skewed relative to the direction of travel. Outer ring with crowned outside surface supports high radial loads and reduces edge stresses which occur thanks to misalignment. Crowned outer rings are best suited in applications with curved or circular tracks. NIBL offers cam followers with a crowned outer ring as a regular feature. Cam followers with cylindrical outer ring also are available, suffix X. To use cam followers with crowned outer ring as bearings, please consult NIBL. Cam followers with manpower of needles offer the most dynamic and static load carrying capability, and anti-friction performance, in a very compact design. Cage-guided cam followers provide large space for grease, helpful in applications where re-lubrication is infrequent. this allows operations at high speed. Sealed type cam followers require low maintenance. Their operating temperature is proscribed because of the grease and seal material which is between -30° C and +100° C. NIBL stud type cam followers contains a solid stud of high strength with an integral rib on one side, thick-walled outer ring, rolling elements set and a thrust washer pressed on to the opposite side of the stud. The assembly of those components forms an integrated unit. the world which is the race way for the rolling elements and also the abutment surfaces are hardened.
NRB Industrial Stud Type Cam Follower, Inner Dia 10 mm, Outer Dia 22 mm, Width 12 mm, KR22EE
sku-leadTime Ships within 3 days
NRB Industrial Stud Type Cam Follower, Inner Dia 10 mm, Outer Dia 22 mm, Width 12 mm, KR22EE
By NRB Industrial
₹754  
KR22EE Stud Type Track Roller of NRB Industrial is designed to run directly on surfaces like cams, ramps, and slide ways. They're used as track rollers, cam followers, and in an exceedingly big selection of linear motion systems. so as to fulfill the operating conditions of heavy radial loads usually in the middle of repeated shocks. NIBL cam followers have a significant section outer ring of high strength steel hardened to 58 – 62 HR. There's a lubrication groove on the outer ring, which prevents the introduction of impurities into the bearing scaling and galling of the bearing track. The convex (crowned) outer ring tolerating out-of-parallelism of contact surfaces. Crowned outer rings are used where the axis of the cam follower isn't parallel to the surface of the track or is skewed relative to the direction of travel. Outer ring with crowned outside surface supports high radial loads and reduces edge stresses which occur thanks to misalignment. Crowned outer rings are best suited in applications with curved or circular tracks. NIBL offers cam followers with a crowned outer ring as a regular feature. Cam followers with cylindrical outer ring also are available, suffix X. To use cam followers with crowned outer ring as bearings, please consult NIBL. Cam followers with manpower of needles offer the most dynamic and static load carrying capability, and anti-friction performance, in a very compact design. Cage-guided cam followers provide large space for grease, helpful in applications where re-lubrication is infrequent. this allows operations at high speed. Sealed type cam followers require low maintenance. Their operating temperature is proscribed because of the grease and seal material which is between -30° C and +100° C. NIBL stud type cam followers contains a solid stud of high strength with an integral rib on one side, thick-walled outer ring, rolling elements set and a thrust washer pressed on to the opposite side of the stud. The assembly of those components forms an integrated unit. the world which is the race way for the rolling elements and also the abutment surfaces are hardened.
NRB Industrial Stud Type Cam Follower, Inner Dia 10 mm, Outer Dia 19 mm, Width 12 mm, KR19EE
sku-leadTime Ships within 3 days
NRB Industrial Stud Type Cam Follower, Inner Dia 10 mm, Outer Dia 19 mm, Width 12 mm, KR19EE
By NRB Industrial
₹707  
KR19EE Stud Type Track Roller of NRB Industrial is designed to run directly on surfaces like cams, ramps, and slide ways. They're used as track rollers, cam followers, and in an exceedingly big selection of linear motion systems. so as to fulfill the operating conditions of heavy radial loads usually in the middle of repeated shocks. NIBL cam followers have a significant section outer ring of high strength steel hardened to 58 – 62 HR. There's a lubrication groove on the outer ring, which prevents the introduction of impurities into the bearing scaling and galling of the bearing track. The convex (crowned) outer ring tolerating out-of-parallelism of contact surfaces. Crowned outer rings are used where the axis of the cam follower isn't parallel to the surface of the track or is skewed relative to the direction of travel. Outer ring with crowned outside surface supports high radial loads and reduces edge stresses which occur thanks to misalignment. Crowned outer rings are best suited in applications with curved or circular tracks. NIBL offers cam followers with a crowned outer ring as a regular feature. Cam followers with cylindrical outer ring also are available, suffix X. To use cam followers with crowned outer ring as bearings, please consult NIBL. Cam followers with manpower of needles offer the most dynamic and static load carrying capability, and anti-friction performance, in a very compact design. Cage-guided cam followers provide large space for grease, helpful in applications where re-lubrication is infrequent. this allows operations at high speed. Sealed type cam followers require low maintenance. Their operating temperature is proscribed because of the grease and seal material which is between -30° C and +100° C. NIBL stud type cam followers contains a solid stud of high strength with an integral rib on one side, thick-walled outer ring, rolling elements set and a thrust washer pressed on to the opposite side of the stud. The assembly of those components forms an integrated unit. the world which is the race way for the rolling elements and also the abutment surfaces are hardened.
NRB Industrial Stud Type Cam Follower, Inner Dia 6 mm, Outer Dia 16 mm, Width 11 mm, KR16EE
sku-leadTime Ships within 4 days
NRB Industrial Stud Type Cam Follower, Inner Dia 6 mm, Outer Dia 16 mm, Width 11 mm, KR16EE
By NRB Industrial
₹683  
KR16EE Stud Type Track Roller of NRB Industrial is designed to run directly on surfaces like cams, ramps, and slide ways. They're used as track rollers, cam followers, and in an exceedingly big selection of linear motion systems. so as to fulfill the operating conditions of heavy radial loads usually in the middle of repeated shocks. NIBL cam followers have a significant section outer ring of high strength steel hardened to 58 – 62 HR. There's a lubrication groove on the outer ring, which prevents the introduction of impurities into the bearing scaling and galling of the bearing track. The convex (crowned) outer ring tolerating out-of-parallelism of contact surfaces. Crowned outer rings are used where the axis of the cam follower isn't parallel to the surface of the track or is skewed relative to the direction of travel. Outer ring with crowned outside surface supports high radial loads and reduces edge stresses which occur thanks to misalignment. Crowned outer rings are best suited in applications with curved or circular tracks. NIBL offers cam followers with a crowned outer ring as a regular feature. Cam followers with cylindrical outer ring also are available, suffix X. To use cam followers with crowned outer ring as bearings, please consult NIBL. Cam followers with manpower of needles offer the most dynamic and static load carrying capability, and anti-friction performance, in a very compact design. Cage-guided cam followers provide large space for grease, helpful in applications where re-lubrication is infrequent. this allows operations at high speed. Sealed type cam followers require low maintenance. Their operating temperature is proscribed because of the grease and seal material which is between -30° C and +100° C. NIBL stud type cam followers contains a solid stud of high strength with an integral rib on one side, thick-walled outer ring, rolling elements set and a thrust washer pressed on to the opposite side of the stud. The assembly of those components forms an integrated unit. the world which is the race way for the rolling elements and also the abutment surfaces are hardened.
NRB Industrial Cam Follower Bearing, Inner Dia 24 mm, Outer Dia 42 mm, Width 15 mm, RNA11017B6
sku-leadTime Ships within 3 days
NRB Industrial Cam Follower Bearing, Inner Dia 24 mm, Outer Dia 42 mm, Width 15 mm, RNA11017B6
By NRB Industrial
₹1,415  
This RNA11017B6 Yoke Type Cam Follower of NRB Industrial is designed to run directly on surfaces like cams, ramps, and slide ways. This is often used as track rollers, cam followers, and in a very big selection of linear motion systems. So as to satisfy the operating conditions of heavy radial loads usually in the middle of repeated shocks. There's a lubrication groove on the outer ring, which prevents the introduction of impurities into the bearing scaling and galling of the bearing track. The convex (crowned) outer ring tolerating out-of-parallelism of contact surfaces. Crowned outer rings are used where the axis of the cam follower isn't parallel to the surface of the track or is skewed relative to the direction of travel. Outer ring with crowned outside surface supports high radial loads and reduces edge stresses which occur thanks to misalignment. Crowned outer rings are best suited in applications with curved or circular tracks. Cam followers offer the utmost dynamic and static load carrying capability, and anti-friction performance, in a very compact design. Cage-guided cam followers provide large space for grease, helpful in applications where re-lubrication is infrequent. this allows operations at high speed. Sealed type cam followers require low maintenance. This product accommodates a solid stud of high lastingness with an integral rib on one side, thick-walled outer ring, rolling elements set and a thrust washer pressed on to the opposite side of the stud. The assembly of those components forms an integrated unit. the world which is the race way for the rolling elements and also the abutment surfaces are hardened.
NRB Industrial Cam Follower Bearing, Inner Dia 18 mm, Outer Dia 32 mm, Width 15 mm, RNA11012B6
sku-leadTime Ships within 3 days
NRB Industrial Cam Follower Bearing, Inner Dia 18 mm, Outer Dia 32 mm, Width 15 mm, RNA11012B6
By NRB Industrial
₹2,005   ₹2,095
You save ₹90!
4.27% OFF
This RNA11012B6 Yoke Type Cam Follower of NRB Industrial is designed to run directly on surfaces like cams, ramps, and slide ways. This is often used as track rollers, cam followers, and in a very big selection of linear motion systems. So as to satisfy the operating conditions of heavy radial loads usually in the middle of repeated shocks. There's a lubrication groove on the outer ring, which prevents the introduction of impurities into the bearing scaling and galling of the bearing track. The convex (crowned) outer ring tolerating out-of-parallelism of contact surfaces. Crowned outer rings are used where the axis of the cam follower isn't parallel to the surface of the track or is skewed relative to the direction of travel. Outer ring with crowned outside surface supports high radial loads and reduces edge stresses which occur thanks to misalignment. Crowned outer rings are best suited in applications with curved or circular tracks. Cam followers offer the utmost dynamic and static load carrying capability, and anti-friction performance, in a very compact design. Cage-guided cam followers provide large space for grease, helpful in applications where re-lubrication is infrequent. this allows operations at high speed. Sealed type cam followers require low maintenance. This product accommodates a solid stud of high lastingness with an integral rib on one side, thick-walled outer ring, rolling elements set and a thrust washer pressed on to the opposite side of the stud. The assembly of those components forms an integrated unit. the world which is the race way for the rolling elements and also the abutment surfaces are hardened.
NRB Industrial Cam Follower Bearing, Inner Dia 12 mm, Outer Dia 28 mm, Width 12 mm, RNA11009B6
sku-leadTime Ships within 2 days
NRB Industrial Cam Follower Bearing, Inner Dia 12 mm, Outer Dia 28 mm, Width 12 mm, RNA11009B6
By NRB Industrial
₹1,533  
This RNA11009B6 Yoke Type Cam Follower of NRB Industrial is designed to run directly on surfaces like cams, ramps, and slide ways. This is often used as track rollers, cam followers, and in a very big selection of linear motion systems. So as to satisfy the operating conditions of heavy radial loads usually in the middle of repeated shocks. There's a lubrication groove on the outer ring, which prevents the introduction of impurities into the bearing scaling and galling of the bearing track. The convex (crowned) outer ring tolerating out-of-parallelism of contact surfaces. Crowned outer rings are used where the axis of the cam follower isn't parallel to the surface of the track or is skewed relative to the direction of travel. Outer ring with crowned outside surface supports high radial loads and reduces edge stresses which occur thanks to misalignment. Crowned outer rings are best suited in applications with curved or circular tracks. Cam followers offer the utmost dynamic and static load carrying capability, and anti-friction performance, in a very compact design. Cage-guided cam followers provide large space for grease, helpful in applications where re-lubrication is infrequent. this allows operations at high speed. Sealed type cam followers require low maintenance. This product accommodates a solid stud of high lastingness with an integral rib on one side, thick-walled outer ring, rolling elements set and a thrust washer pressed on to the opposite side of the stud. The assembly of those components forms an integrated unit. the world which is the race way for the rolling elements and also the abutment surfaces are hardened.
NRB Industrial Cam Follower Bearing, Inner Dia 7 mm, Outer Dia 19 mm, Width 12 mm, RNA11005B6
sku-leadTime Ships within 3 days
NRB Industrial Cam Follower Bearing, Inner Dia 7 mm, Outer Dia 19 mm, Width 12 mm, RNA11005B6
By NRB Industrial
₹1,096   ₹1,214
You save ₹118!
9.74% OFF
This RNA11005B6 Yoke Type Cam Follower of NRB Industrial is designed to run directly on surfaces like cams, ramps, and slide ways. This is often used as track rollers, cam followers, and in a very big selection of linear motion systems. So as to satisfy the operating conditions of heavy radial loads usually in the middle of repeated shocks. There's a lubrication groove on the outer ring, which prevents the introduction of impurities into the bearing scaling and galling of the bearing track. The convex (crowned) outer ring tolerating out-of-parallelism of contact surfaces. Crowned outer rings are used where the axis of the cam follower isn't parallel to the surface of the track or is skewed relative to the direction of travel. Outer ring with crowned outside surface supports high radial loads and reduces edge stresses which occur thanks to misalignment. Crowned outer rings are best suited in applications with curved or circular tracks. Cam followers offer the utmost dynamic and static load carrying capability, and anti-friction performance, in a very compact design. Cage-guided cam followers provide large space for grease, helpful in applications where re-lubrication is infrequent. this allows operations at high speed. Sealed type cam followers require low maintenance. This product accommodates a solid stud of high lastingness with an integral rib on one side, thick-walled outer ring, rolling elements set and a thrust washer pressed on to the opposite side of the stud. The assembly of those components forms an integrated unit. the world which is the race way for the rolling elements and also the abutment surfaces are hardened.
NRB Industrial Cam Follower Bearing, Inner Dia 30 mm, Outer Dia 72 mm, Width 28 mm, NUTR3072
sku-leadTime Ships within 3 days
NRB Industrial Cam Follower Bearing, Inner Dia 30 mm, Outer Dia 72 mm, Width 28 mm, NUTR3072
By NRB Industrial
₹4,247  
This NUTR3072 Yoke Type Cam Follower of NRB Industrial is designed to run directly on surfaces like cams, ramps, and slide ways. This is often used as track rollers, cam followers, and in a very big selection of linear motion systems. So as to satisfy the operating conditions of heavy radial loads usually in the middle of repeated shocks. There's a lubrication groove on the outer ring, which prevents the introduction of impurities into the bearing scaling and galling of the bearing track. The convex (crowned) outer ring tolerating out-of-parallelism of contact surfaces. Crowned outer rings are used where the axis of the cam follower isn't parallel to the surface of the track or is skewed relative to the direction of travel. Outer ring with crowned outside surface supports high radial loads and reduces edge stresses which occur thanks to misalignment. Crowned outer rings are best suited in applications with curved or circular tracks. Cam followers offer the utmost dynamic and static load carrying capability, and anti-friction performance, in a very compact design. Cage-guided cam followers provide large space for grease, helpful in applications where re-lubrication is infrequent. this allows operations at high speed. Sealed type cam followers require low maintenance. This product accommodates a solid stud of high lastingness with an integral rib on one side, thick-walled outer ring, rolling elements set and a thrust washer pressed on to the opposite side of the stud. The assembly of those components forms an integrated unit. the world which is the race way for the rolling elements and also the abutment surfaces are hardened.
NRB Industrial Cam Follower Bearing, Inner Dia 25 mm, Outer Dia 62 mm, Width 24 mm, NUTR2562X
sku-leadTime Ships within 3 days
NRB Industrial Cam Follower Bearing, Inner Dia 25 mm, Outer Dia 62 mm, Width 24 mm, NUTR2562X
By NRB Industrial
₹2,949  
This NUTR2562X Yoke Type Cam Follower of NRB Industrial is designed to run directly on surfaces like cams, ramps, and slide ways. This is often used as track rollers, cam followers, and in a very big selection of linear motion systems. So as to satisfy the operating conditions of heavy radial loads usually in the middle of repeated shocks. There's a lubrication groove on the outer ring, which prevents the introduction of impurities into the bearing scaling and galling of the bearing track. The convex (crowned) outer ring tolerating out-of-parallelism of contact surfaces. Crowned outer rings are used where the axis of the cam follower isn't parallel to the surface of the track or is skewed relative to the direction of travel. Outer ring with crowned outside surface supports high radial loads and reduces edge stresses which occur thanks to misalignment. Crowned outer rings are best suited in applications with curved or circular tracks. Cam followers offer the utmost dynamic and static load carrying capability, and anti-friction performance, in a very compact design. Cage-guided cam followers provide large space for grease, helpful in applications where re-lubrication is infrequent. this allows operations at high speed. Sealed type cam followers require low maintenance. This product accommodates a solid stud of high lastingness with an integral rib on one side, thick-walled outer ring, rolling elements set and a thrust washer pressed on to the opposite side of the stud. The assembly of those components forms an integrated unit. the world which is the race way for the rolling elements and also the abutment surfaces are hardened.
NRB Industrial Cam Follower Bearing, Inner Dia 17 mm, Outer Dia 47 mm, Width 21 mm, NUTR1747
sku-leadTime Ships within 3 days
NRB Industrial Cam Follower Bearing, Inner Dia 17 mm, Outer Dia 47 mm, Width 21 mm, NUTR1747
By NRB Industrial
₹2,359  
This NUTR1747 Yoke Type Cam Follower of NRB Industrial is designed to run directly on surfaces like cams, ramps, and slide ways. This is often used as track rollers, cam followers, and in a very big selection of linear motion systems. So as to satisfy the operating conditions of heavy radial loads usually in the middle of repeated shocks. There's a lubrication groove on the outer ring, which prevents the introduction of impurities into the bearing scaling and galling of the bearing track. The convex (crowned) outer ring tolerating out-of-parallelism of contact surfaces. Crowned outer rings are used where the axis of the cam follower isn't parallel to the surface of the track or is skewed relative to the direction of travel. Outer ring with crowned outside surface supports high radial loads and reduces edge stresses which occur thanks to misalignment. Crowned outer rings are best suited in applications with curved or circular tracks. Cam followers offer the utmost dynamic and static load carrying capability, and anti-friction performance, in a very compact design. Cage-guided cam followers provide large space for grease, helpful in applications where re-lubrication is infrequent. this allows operations at high speed. Sealed type cam followers require low maintenance. This product accommodates a solid stud of high lastingness with an integral rib on one side, thick-walled outer ring, rolling elements set and a thrust washer pressed on to the opposite side of the stud. The assembly of those components forms an integrated unit. the world which is the race way for the rolling elements and also the abutment surfaces are hardened.
NRB Industrial Cam Follower Bearing, Inner Dia 8 mm, Outer Dia 24 mm, Width 14 mm, NATV824EEX H0
sku-leadTime Ships within 3 days
NRB Industrial Cam Follower Bearing, Inner Dia 8 mm, Outer Dia 24 mm, Width 14 mm, NATV824EEX H0
By NRB Industrial
₹896  
This NATV824EEX H0 Yoke Type Cam Follower of NRB Industrial is designed to run directly on surfaces like cams, ramps, and slide ways. This is often used as track rollers, cam followers, and in a very big selection of linear motion systems. So as to satisfy the operating conditions of heavy radial loads usually in the middle of repeated shocks. There's a lubrication groove on the outer ring, which prevents the introduction of impurities into the bearing scaling and galling of the bearing track. The convex (crowned) outer ring tolerating out-of-parallelism of contact surfaces. Crowned outer rings are used where the axis of the cam follower isn't parallel to the surface of the track or is skewed relative to the direction of travel. Outer ring with crowned outside surface supports high radial loads and reduces edge stresses which occur thanks to misalignment. Crowned outer rings are best suited in applications with curved or circular tracks. Cam followers offer the utmost dynamic and static load carrying capability, and anti-friction performance, in a very compact design. Cage-guided cam followers provide large space for grease, helpful in applications where re-lubrication is infrequent. this allows operations at high speed. Sealed type cam followers require low maintenance. This product accommodates a solid stud of high lastingness with an integral rib on one side, thick-walled outer ring, rolling elements set and a thrust washer pressed on to the opposite side of the stud. The assembly of those components forms an integrated unit. the world which is the race way for the rolling elements and also the abutment surfaces are hardened.
NRB Industrial Cam Follower Bearing, Inner Dia 15 mm, Outer Dia 35 mm, Width 19 mm, NATV1535EEX H0
sku-leadTime Ships within 3 days
NRB Industrial Cam Follower Bearing, Inner Dia 15 mm, Outer Dia 35 mm, Width 19 mm, NATV1535EEX H0
By NRB Industrial
₹1,132  
This NATV1535EEX H0 Yoke Type Cam Follower of NRB Industrial is designed to run directly on surfaces like cams, ramps, and slide ways. This is often used as track rollers, cam followers, and in a very big selection of linear motion systems. So as to satisfy the operating conditions of heavy radial loads usually in the middle of repeated shocks. There's a lubrication groove on the outer ring, which prevents the introduction of impurities into the bearing scaling and galling of the bearing track. The convex (crowned) outer ring tolerating out-of-parallelism of contact surfaces. Crowned outer rings are used where the axis of the cam follower isn't parallel to the surface of the track or is skewed relative to the direction of travel. Outer ring with crowned outside surface supports high radial loads and reduces edge stresses which occur thanks to misalignment. Crowned outer rings are best suited in applications with curved or circular tracks. Cam followers offer the utmost dynamic and static load carrying capability, and anti-friction performance, in a very compact design. Cage-guided cam followers provide large space for grease, helpful in applications where re-lubrication is infrequent. this allows operations at high speed. Sealed type cam followers require low maintenance. This product accommodates a solid stud of high lastingness with an integral rib on one side, thick-walled outer ring, rolling elements set and a thrust washer pressed on to the opposite side of the stud. The assembly of those components forms an integrated unit. the world which is the race way for the rolling elements and also the abutment surfaces are hardened.
NRB Industrial Cam Follower Bearing, Inner Dia 12 mm, Outer Dia 32 mm, Width 14 mm, NATV1232EEX H0
sku-leadTime Ships within 3 days
NRB Industrial Cam Follower Bearing, Inner Dia 12 mm, Outer Dia 32 mm, Width 14 mm, NATV1232EEX H0
By NRB Industrial
₹1,143  
This NATV1232EEX H0 Yoke Type Cam Follower of NRB Industrial is designed to run directly on surfaces like cams, ramps, and slide ways. This is often used as track rollers, cam followers, and in a very big selection of linear motion systems. So as to satisfy the operating conditions of heavy radial loads usually in the middle of repeated shocks. There's a lubrication groove on the outer ring, which prevents the introduction of impurities into the bearing scaling and galling of the bearing track. The convex (crowned) outer ring tolerating out-of-parallelism of contact surfaces. Crowned outer rings are used where the axis of the cam follower isn't parallel to the surface of the track or is skewed relative to the direction of travel. Outer ring with crowned outside surface supports high radial loads and reduces edge stresses which occur thanks to misalignment. Crowned outer rings are best suited in applications with curved or circular tracks. Cam followers offer the utmost dynamic and static load carrying capability, and anti-friction performance, in a very compact design. Cage-guided cam followers provide large space for grease, helpful in applications where re-lubrication is infrequent. this allows operations at high speed. Sealed type cam followers require low maintenance. This product accommodates a solid stud of high lastingness with an integral rib on one side, thick-walled outer ring, rolling elements set and a thrust washer pressed on to the opposite side of the stud. The assembly of those components forms an integrated unit. the world which is the race way for the rolling elements and also the abutment surfaces are hardened.
Recommended Items
sku-leadTime Ships within 10 days
WD-40 Multipurpose Cleaning Spray 420 ml
14
₹312
oos-available Ships within 24 hrs
Nataraj Classic Use & Throw Ball Pens Blue (Pack of 40)
17
Pack of 40 piece
₹150
oos-available Ships within 24 hrs
Silverton 65 GSM A4 Copier Paper (Pack of 10 Ream)
13
Pack of 10 ream
₹1,886
oos-available Ships within 24 hrs
Generic 5 L Rose Fragrance Liquid Soap Hand Wash
1
Can of 1 piece
₹296
oos-available Ships within 24 hrs
Generic BOPP Packaging Brown Tape 50.8mm(2 Inch) x 50 m (Pack of 6)
13
Pack of 6 piece
₹173
oos-available Ships within 24 hrs
Generic Floor Cleaner Lemon Fragrance Yellow, (5 L)
Can of 1 piece
₹271
oos-available Ships within 24 hrs
POWERWASH 40X40 cm 600 GSM Microfiber Cloth (Pack of 4)
11
Pack of 4 piece
₹184
oos-available Ships within 24 hrs
Luxor 1223 Whiteboard Marker Pens Black (Pack of 10)
Pack of 10 piece
₹152
oos-available Ships within 24 hrs
Duracell Chhota Power AAA Alkaline Batteries (Pack of 12)
15
Pack of 12 piece
₹214
oos-available Ships within 24 hrs
Allen Cooper Steel Toe Safety Shoes Low Ankle PU Sole Size 8 UK/India Black & Grey, ACL-1156
4
₹1,519
oos-available Ships within 24 hrs
IB BASICS 555 GSM Box Index File With Lamination Legal A4 Size Assorted Color (Pack of 4)
Pack of 4 piece
₹269
oos-available Ships within 24 hrs
Silverton 70 GSM A4 Copier Paper (Pack of 10 Ream)
17
Pack of 10 ream
₹1,999
oos-available Ships within 24 hrs
GENERIC 10x12 inch Plastic Tamper Resistant Courier Bag with POD, 51 Micron (Pack of 100)
2
Pack of 100 piece
₹185
oos-available Ships within 24 hrs
IB BASICS 310 GSM Cobra File (Spring Clip) Assorted Color A4 Size (Pack of 10)
Pack of 10 piece
₹150
oos-available Ships within 24 hrs
Safari Pro Steel Toe Derby Safety Shoes Low Ankle Size UK 8 Black Model Power
6
₹194
oos-available Ships within 24 hrs
ABRO PU Foam Insulation Sealant Off White, 750 ml
₹393
oos-available Ships within 24 hrs
GENERIC Steel Toe Safety Shoes High Ankle PVC Sole Size UK 9 Black, Power-9
12
₹299
oos-available Ships within 24 hrs
GENERIC 12A Compatible Toner Cartridge Black for HP LaserJet 1010 and 1020 Printer series, HP LaserJet 3015, 3020, 3030, 3050, 3050z, 3052, and 3055 All-in-One Printer series, and HP LaserJet M1005 mfp
14
₹412
Browsing History
sku-leadTime Ships within 5 days
NVK CULTIVATOR 9 - TYNES
₹37,799
sku-leadTime Ships within 7 days
Kisankraft Agricultural Inter Cultivator KK-IC-250D
₹99,749
sku-leadTime Ships within 3 days
RBD Mini Harvester Petrol Type with ISI Honda Engine RBD-RPR
₹1,67,999
sku-leadTime Ships within 7 days
Kisankraft Diesel Intercultivator KK-IC-256D
₹93,449
sku-leadTime Ships within 10 days
Stihl 7 HP Petrol Operated Power Tiller, MH-710
₹82,949
sku-leadTime Ships within 3 days
RBD Mini Harvester Diesel Type with ISI Greaves Cotton Engine RBD-RDR
₹1,78,499
sku-leadTime Ships within 3 days
Texas 306 cc 4 stroke Power Weeder Pro Trac 950D with Self Start
₹1,78,499
sku-leadTime Ships within 6 days
Neptune NC-100 380 RPM Red Weeder
₹44,099 ₹54,600
19.23% OFF
sku-leadTime Ships within 7 days
KISANKRAFT Agricultural Inter Cultivator/Power Weeder 208 cc 4 Stroke Petrol Engine, KK-IC-208P
₹86,139
Helpline Number
Helpline Number Call: +91 9650660070 (Mon-Sun: 9am-8pm)
Return within 7 days
Return within 7 days of receiving your order
100% Safe & Secure Payments
100% Safe & Secure Payments Pay using secure payment methods
100% ORIGINAL
100% ORIGINAL guarantee for all products
Complete products
Complete products 20,00,000+ products from 12,000+ Brands
Buyer Protection
Buyer Protection Committed to buyer interests to provide a smooth shopping experience.
Experience Industrybuying App
play store app store
Follow us on
facebook twitter instagram pinterest linkedin

Company

Sister Site

Help

Copyright ©industrybuying.com 2013-2026 All Right Reserved
payment options