• Home /
• All Brands /
• Panacea Technology /
• Hydraulics and Pneumatics

Have a question? Call us now at +91 9650660070

Panacea Technology Hydraulics and Pneumatics

Showing 40 out of 149 products

Sort by

Recommended New Price : Low to High Price : High to Low

Ships within 5 days

Panacea Technology PU Ester Tube 12 mm OD 9 mm ID (Pack of 100 m Roll)

By Panacea Technology

Roll of 100 metre

₹8,141 - ₹8,259

You save ₹1,063!

11.4% OFF

Panacea Technology PU Ester Tube 12 mm OD 9 mm ID (Pack of 100 m Roll) is designed for pneumatic air-line applications where a 12 mm outer diameter and 9 mm inner diameter are specified. Made from PU ester material, this tubing provides a flexible route for compressed air between suitably matched components. Its dimensional profile offers a clear reference when selecting fittings and connectors for pneumatic assemblies. The 100 m roll supplies a continuous length that can be measured and cut according to individual routing requirements, making it suitable for installations with several connection points. The tube can be arranged around machinery and equipment where flexible air-line positioning is required.Panacea Technology PU Ester Tube 12 mm OD 9 mm ID (Pack of 100 m Roll) is suitable for use with compatible pneumatic valves, regulators, push-in fittings, air preparation units, and automation components. Its 9 mm internal diameter defines the available air passage, while the 12 mm outer diameter establishes the external tube dimension for connection selection. The PU ester construction makes it appropriate for flexible pneumatic routing in machinery, control systems, and workshop setups. Supplied as a 100 m roll, it can be divided into application-specific sections during installation. Classified under the Air Hose Coil category, this Panacea Technology product is intended for compressed-air routing systems.

Type of Product : PU Ester Tube

ID (mm) : 9 mm

Wall Thickness : 1.5 mm

OD (mm) : 12 mm

Working Temperature : -20 to + 70 °C

Pack of : Roll of 100 m

Explore other Variants (16)

Ships within 5 days

Panacea Technology PU Ester Tube 10 mm OD 6.5 mm ID (Pack of 100 m Roll)

By Panacea Technology

Roll of 100 metre

₹7,551 - ₹7,669

You save ₹945!

10.97% OFF

Panacea Technology PU Ester Tube 10 mm OD 6.5 mm ID (Pack of 100 m Roll) is intended for pneumatic air-line arrangements that call for a 10 mm outer diameter and 6.5 mm inner diameter. Produced from PU ester material, this tube provides a flexible pathway for compressed air between compatible pneumatic components. Its defined dimensions make it easier to identify suitable connectors, fittings, and other accessories during installation. The 100 m roll format provides a continuous length that can be portioned into individual sections based on the routing layout. This makes the tubing suitable for structured installations where air lines need to pass between multiple equipment points while maintaining a consistent tube size throughout the circuit.Panacea Technology PU Ester Tube 10 mm OD 6.5 mm ID (Pack of 100 m Roll) can be integrated with compatible valves, push-in fittings, regulators, air preparation units, and pneumatic automation components. The 6.5 mm internal diameter establishes the air passage, while the 10 mm outside diameter defines the external profile for connection compatibility. Its PU ester construction supports applications requiring flexible tube routing around machinery and control equipment. The supplied 100 m roll can be cut into required lengths for different pneumatic sections. Categorized as an Air Hose Coil, this Panacea Technology tube is suited to compressed-air routing in pneumatic systems.

Type of Product : PU Ester Tube

ID (mm) : 6.5 mm

Wall Thickness : 1.75 mm

OD (mm) : 10 mm

Pack : Roll of 100 m

Working Temperature : -20 to + 70 °C

Radius : 25

Explore other Variants (15)

Ships within 5 days

Panacea Technology PU Ester Tube 10 mm OD 7 mm ID (Pack of 100 m Roll)

By Panacea Technology

Roll of 100 metre

₹6,607 - ₹6,843

You save ₹709!

9.39% OFF

Panacea Technology PU Ester Tube 10 mm OD 7 mm ID (Pack of 100 m Roll) is developed for pneumatic air circuits where a 10 mm outside diameter and 7 mm inside diameter are required. The PU ester construction provides a flexible tubing format for directing compressed air between compatible components while allowing practical routing around equipment. Its clearly specified dimensions assist in selecting matching pneumatic fittings and connection accessories. Supplied as a 100 m roll, the tube can be measured and divided into lengths suited to individual sections of an installation. This format is useful for pneumatic layouts involving multiple connection points, equipment assemblies, and extended air-line routes.Panacea Technology PU Ester Tube 10 mm OD 7 mm ID (Pack of 100 m Roll) is compatible with suitably sized pneumatic connectors, valves, regulators, air preparation units, and automation components. The 7 mm internal diameter defines the available air passage, while the 10 mm outer diameter establishes the external tube profile for fitting selection. Its PU ester material makes it suitable for flexible routing within machinery, control systems, and workshop pneumatic setups. The 100 m roll provides tubing that can be cut according to specific installation sections without changing the tube specification. Classified under the Air Hose Coil category, this Panacea Technology product is intended for compressed-air line applications.

Type of Product : PU Ester Tube

ID (mm) : 7 mm

Wall Thickness : 1.5 mm

OD (mm) : 10 mm

Pack : Roll of 100 m

Working Temperature : -20 to + 70 °C

Radius : 25

Explore other Variants (15)

Ships within 5 days

Panacea Technology PU Ester Tube 8 mm OD 5 mm ID (Pack of 100 m Roll)

By Panacea Technology

Roll of 100 metre

₹5,073 - ₹5,309

You save ₹473!

8.18% OFF

Panacea Technology PU Ester Tube 8 mm OD 5 mm ID (Pack of 100 m Roll) is a pneumatic tubing choice suited to air-line arrangements requiring a defined 8 mm outer diameter and 5 mm inner diameter. Manufactured using PU ester material, it provides a flexible tube format for connecting compatible pneumatic equipment and routing air between components. The specified dimensions make it suitable for selecting matching fittings and connection accessories based on tube size. Supplied as a 100 m roll, it provides ample tubing length for preparing separate sections across pneumatic installations, while the continuous roll format supports planned routing with fewer interruptions between connection points.Panacea Technology PU Ester Tube 8 mm OD 5 mm ID (Pack of 100 m Roll) can be incorporated into compatible pneumatic circuits involving fittings, valves, regulators, air preparation units, and automation components. Its 8 mm outside diameter provides a clearly defined external profile, while the 5 mm internal diameter establishes the available air passage within the tube. The 100 m roll can be measured and cut into application-specific lengths for machinery, control equipment, and workshop air systems. Listed under the Air Hose Coil category, this Panacea Technology tube combines specified dimensions with a practical roll configuration for compressed-air routing applications.

Type of Product : PU Ester Tube

ID (mm) : 5 mm

Wall Thickness : 1.5 mm

OD (mm) : 8 mm

Pack : Roll of 100 m

Working Temperature : -20 to + 70 °C

Explore other Variants (15)

Related Searches

panacea technology hydraulic couplings

panacea technology air hose coil

panacea technology solenoid valve

panacea technology pneumatic fittings

Ships within 5 days

Panacea Technology PU Ester Tube 8 mm OD 5.5 mm ID (Pack of 100 m Roll)

By Panacea Technology

Roll of 100 metre

₹4,483 - ₹4,719

You save ₹355!

7% OFF

Panacea Technology PU Ester Tube 8 mm OD 5.5 mm ID (Pack of 100 m Roll) is designed for pneumatic installations that require a flexible tube with a specified 8 mm outer diameter and 5.5 mm inner diameter. Constructed from PU ester material, this tubing provides a suitable passage for compressed air within compatible pneumatic arrangements. Its dimensional profile allows it to be matched with appropriate fittings and connectors for air-line assembly. Supplied in a 100 m roll, the tubing can be divided into required lengths for different connection points, helping accommodate varied routing layouts across machinery and pneumatic equipment. The roll format also provides a convenient way to manage tubing requirements for installations involving multiple air-line sections.Panacea Technology PU Ester Tube 8 mm OD 5.5 mm ID (Pack of 100 m Roll) is suitable for compatible pneumatic fittings, valves, regulators, air preparation assemblies, and automation equipment. The 5.5 mm internal diameter establishes the tube's air passage, while the 8 mm external diameter provides the specified outside profile for connection selection. Its PU ester construction suits applications where tubing needs to be routed between components within a pneumatic system. With 100 m supplied in a single roll, it can be cut to suit individual installation points in machinery, control systems, and workshop air circuits. This product falls under the Air Hose Coil category from Panacea Technology.

Type of Product : PU Ester Tube

ID (mm) : 5.5 mm

Wall Thickness : 1.25 mm

OD (mm) : 8 mm

Pack : Roll of 100 m

Working Temperature : -20 to + 70 °C

Radius : 20

Explore other Variants (15)

Ships within 5 days

Panacea Technology PU Ester Tube 8 mm OD 6 mm ID (Pack of 100 m Roll)

By Panacea Technology

Roll of 100 metre

₹3,185 - ₹3,657

You save ₹473!

11.45% OFF

Panacea Technology PU Ester Tube 8 mm OD 6 mm ID (Pack of 100 m Roll) is a pneumatic tubing solution designed for air-line setups requiring an 8 mm outer diameter and 6 mm inner diameter. Made from PU ester material, it provides a defined internal route for compressed air while offering a flexible format for positioning around compatible pneumatic equipment. The specified tube dimensions support accurate selection of connectors and fittings during system assembly. Supplied in a 100 m roll, it provides a continuous length that can be measured and cut for individual sections, making it suitable for installations involving multiple connection points and varied routing requirements.Panacea Technology PU Ester Tube 8 mm OD 6 mm ID (Pack of 100 m Roll) can be used with suitably matched pneumatic fittings, valves, regulators, air preparation units, and automation components. Its 6 mm internal diameter establishes the available passage for air, while the 8 mm outside diameter defines the external size for compatible connection hardware. The PU ester construction makes the tubing suitable for flexible air-line routing across machinery, control equipment, and workshop pneumatic circuits. The 100 m roll format allows users to prepare tube lengths according to the layout of the installation. Listed under the Air Hose Coil category, this Panacea Technology product is specified for compressed-air routing applications.

Type of Product : PU Ester Tube

ID (mm) : 6 mm

Wall Thickness : 1 mm

OD (mm) : 8 mm

Pack : Roll of 100 m

Working Temperature : -20 to + 70 °C

Explore other Variants (15)

Ships within 5 days

Panacea Technology PU Ester Tube 6 mm OD 4 mm ID (Pack of 100 m Roll)

By Panacea Technology

Roll of 100 metre

₹2,595 - ₹2,831

You save ₹119!

4.03% OFF

Panacea Technology PU Ester Tube 6 mm OD 4 mm ID (Pack of 100 m Roll) is intended for pneumatic air connections that require a balanced tube size for compact routing and component integration. With a 6 mm outer diameter and 4 mm inner diameter, this PU ester tubing provides a defined channel for compressed-air flow through compatible pneumatic assemblies. Its polyurethane construction supports flexible positioning around machinery, control panels, and connection points without requiring a rigid tube arrangement. Supplied in a 100 m roll, it offers a convenient continuous length for preparing multiple air-line sections according to installation layouts and required routing distances.Panacea Technology PU Ester Tube 6 mm OD 4 mm ID (Pack of 100 m Roll) can be used with suitably sized pneumatic fittings, push-in connectors, valves, regulators, and air preparation components. The 6 mm OD specification provides a practical tubing profile for organized routing in automation equipment, pneumatic control systems, and workshop machinery. Its 4 mm ID defines the internal passage and helps in selecting compatible connection hardware based on dimensional requirements. The 100 m roll format allows users to cut individual sections as needed while keeping tubing lengths organized during installation. Classified under the Air Hose Coil category, this Panacea Technology tube is designed for structured compressed-air line applications.

Type of Product : PU Ester Tube

ID (mm) : 4 mm

Wall Thickness : 1 mm

OD (mm) : 6 mm

Pack : Roll of 100 m

Working Temperature : -20 to + 70 °C

Radius : 12

Explore other Variants (15)

Ships within 5 days

Panacea Technology PU Ester Tube 4 mm OD 2.5 mm ID (Pack of 100 m Roll)

By Panacea Technology

Roll of 100 metre

₹1,651 - ₹1,887

Panacea Technology PU Ester Tube 4 mm OD 2.5 mm ID (Pack of 100 m Roll) is a compact pneumatic tubing option intended for air-line connections where a smaller tube profile is required. It features a 4 mm outer diameter and 2.5 mm inner diameter, providing a clearly defined passage for compressed air through compatible pneumatic components. Made from PU ester material, the tube offers a flexible format that can be routed through compact equipment arrangements and around connection points. The 100 m roll provides a continuous supply length that can be cut according to the dimensions required for individual pneumatic circuits, supporting organized installation across suitable machinery and control systems.Panacea Technology PU Ester Tube 4 mm OD 2.5 mm ID (Pack of 100 m Roll) can be paired with compatible push-in fittings, valves, regulators, air preparation units, and other pneumatic components designed for its specified dimensions. Its narrow 4 mm outer profile makes it relevant for installations where tubing space needs to remain compact while maintaining a defined internal diameter. The roll format is practical for routing air lines between closely positioned components in automation equipment, instrumentation setups, and pneumatic assemblies. Listed under the Air Hose Coil category, this Panacea Technology tube provides specified dimensional characteristics for applications requiring compact pneumatic tubing.

Type of Product : PU Ester Tube

ID (mm) : 2.5 mm

Wall Thickness : 0.75 mm

OD (mm) : 4 mm

Working Temperature : -20 to + 70 °C

Radius : 10

Explore other Variants (15)

Ships within 5 days

Panacea Technology Advanced Polyamide PU Tube 10 mm OD 8 mm ID (Pack of 100 m Roll)

By Panacea Technology

Roll of 100 metre

₹3,657 - ₹3,657

You save ₹473!

11.45% OFF

Panacea Technology Advanced Polyamide PU Tube 10 mm OD 8 mm ID (Pack of 100 m Roll) is a pneumatic tubing solution configured for air circuits that need an 8 mm internal passage within a 10 mm external profile. It has a 10 mm outer diameter and 8 mm inner diameter, resulting in a 1 mm wall thickness for use with compatible pneumatic fittings and accessories. The 100 m roll provides a continuous supply that can be divided into required lengths for machinery, automation systems, control panels, and pneumatic equipment. Its polyamide PU construction offers a practical format for organized air-line installation and connection work where specific tube dimensions are essential.Panacea Technology Advanced Polyamide PU Tube 10 mm OD 8 mm ID (Pack of 100 m Roll) can be connected with compatible push-in fittings, valves, regulators, cylinders, actuators, and air preparation components. The 8 mm internal diameter defines the available passage for compatible compressed-air applications, while the 10 mm outside diameter helps establish fitting and support requirements. The extended roll length allows sections to be measured and cut for individual pneumatic routes, replacements, or circuit modifications. This Panacea Technology tube is suitable for industrial air systems requiring a defined bore, balanced tube profile, and convenient bulk-length supply.

Type of Product : Advanced Polyamide PU Tube

Material : Advanced Polyamide

ID (mm) : 8 mm

Wall Thickness : 1.5 mm

OD (mm) : 10 mm

Pack of : Roll of 100 m

Explore other Variants (9)

Ships within 5 days

Panacea Technology Advanced Polyamide PU Tube 8 mm OD 5 mm ID (Pack of 100 m Roll)

By Panacea Technology

Roll of 100 metre

₹3,421 - ₹3,539

You save ₹355!

9.12% OFF

Panacea Technology Advanced Polyamide PU Tube 8 mm OD 5 mm ID (Pack of 100 m Roll) is designed for pneumatic air circuits that require a mid-size tube profile with a clearly specified internal bore. It features an 8 mm outer diameter and 5 mm inner diameter, providing a 1.5 mm wall thickness for use with suitably matched pneumatic fittings. Supplied in a 100 m roll, it provides a continuous tubing length that can be cut into sections for equipment connections, air-line routing, and automation assemblies. The polyamide PU construction is suited to organized pneumatic installations where defined dimensions and convenient tube handling are important.Panacea Technology Advanced Polyamide PU Tube 8 mm OD 5 mm ID (Pack of 100 m Roll) can be incorporated with compatible push-in connectors, valves, regulators, actuators, cylinders, and other pneumatic components. Its 5 mm internal diameter establishes the passage size for compatible compressed-air applications, while the 8 mm external dimension helps identify suitable fittings, clips, and supports. The 100 m roll format allows individual lengths to be prepared according to the requirements of different pneumatic layouts, servicing tasks, or circuit modifications. This Panacea Technology tube is suitable for industrial air systems requiring a defined tube size and extended roll length.

Type of Product : Advanced Polyamide PU Tube

Material : Advanced Polyamide

ID (mm) : 5 mm

Wall Thickness : 1.5 mm

OD (mm) : 8 mm

Pack of : Roll of 100 m

Explore other Variants (10)

Ships within 5 days

Panacea Technology Advanced Polyamide PU Tube 8 mm OD 5.5 mm ID (Pack of 100 m Roll)

By Panacea Technology

Roll of 100 metre

₹2,949 - ₹3,067

You save ₹237!

7.17% OFF

Panacea Technology Advanced Polyamide PU Tube 8 mm OD 5.5 mm ID (Pack of 100 m Roll) is a pneumatic tubing option developed for air-line arrangements where a defined bore and outer profile are required. With an 8 mm outer diameter and 5.5 mm inner diameter, it provides a 1.25 mm wall thickness for use with appropriately sized pneumatic connections. The 100 m roll format provides substantial tubing length for preparing customized sections across automation equipment, machinery, control assemblies, and air circuits. Its polyamide PU construction makes it suitable for applications where consistent tube dimensions and practical routing are important.Panacea Technology Advanced Polyamide PU Tube 8 mm OD 5.5 mm ID (Pack of 100 m Roll) can be paired with compatible fittings and pneumatic components such as connectors, regulators, valves, cylinders, and actuators. The 5.5 mm internal diameter defines the passage available for compatible compressed-air lines, while the 8 mm outside diameter helps in selecting matching connection and support hardware. The 100 m length can be measured and cut as required for individual installation points, replacement sections, or circuit extensions. This Panacea Technology tubing is suited to industrial pneumatic setups that call for a specific dimensional combination and convenient bulk-roll supply.

Type of Product : Advanced Polyamide PU Tube

Material : Advanced Polyamide

ID (mm) : 5.5 mm

Wall Thickness : 1.25 mm

OD (mm) : 8 mm

Pack of : Roll of 100 m

Explore other Variants (10)

Ships within 5 days

Panacea Technology Advanced Polyamide PU Tube 8 mm OD 6 mm ID (Pack of 100 m Roll)

By Panacea Technology

Roll of 100 metre

₹2,359 - ₹2,477

You save ₹119!

4.58% OFF

Panacea Technology Advanced Polyamide PU Tube 8 mm OD 6 mm ID (Pack of 100 m Roll) is configured for pneumatic air-routing requirements where a wider internal bore is needed within an 8 mm external profile. The tube measures 8 mm in outer diameter and 6 mm in inner diameter, giving a 1 mm wall thickness for use with suitably matched pneumatic fittings. Supplied as a 100 m roll, it provides extended tubing length that can be portioned according to individual connection points and installation routes. Its polyamide PU construction makes this tubing suitable for structured air-line arrangements across automation equipment, machinery, and pneumatic control systems.Panacea Technology Advanced Polyamide PU Tube 8 mm OD 6 mm ID (Pack of 100 m Roll) offers a practical format for assembling and modifying pneumatic circuits with compatible components. The 6 mm internal passage helps define the required connection size for compressed-air lines, while the 8 mm outside diameter can be considered when selecting fittings, clamps, and tube supports. The 100 m roll allows users to prepare different lengths for equipment connections, replacement sections, or air-line extensions without changing the specified tube profile. This Panacea Technology product is suitable for industrial pneumatic applications requiring a clearly defined bore, compact external dimension, and long roll configuration.

Type of Product : Advanced Polyamide PU Tube

Material : Advanced Polyamide

ID (mm) : 6 mm

Wall Thickness : 1 mm

OD (mm) : 8 mm

Pack of : Roll of 100 m

Explore other Variants (10)

Ships within 5 days

Panacea Technology Advanced Polyamide PU Tube 12 mm OD 10 mm ID (Pack of 100 m Roll)

By Panacea Technology

Roll of 100 metre

₹5,663 - ₹5,899

You save ₹591!

9.11% OFF

Panacea Technology Advanced Polyamide PU Tube 12 mm OD 10 mm ID (Pack of 100 m Roll) is designed for pneumatic air and fluid transfer applications where a flexible tube with defined dimensional accuracy is required. This tube features a 12 mm outer diameter and 10 mm inner diameter, providing a 2 mm wall thickness for suitable routing through pneumatic assemblies. Supplied as a 100 m roll, it offers a continuous length that can be cut according to installation requirements. The polyamide and PU construction combines the characteristics of both materials to support practical use in compact and organized pneumatic layouts.Panacea Technology Advanced Polyamide PU Tube 12 mm OD 10 mm ID (Pack of 100 m Roll) can be used with compatible pneumatic fittings, connectors, valves, and air preparation components. Its coiled roll format helps simplify storage, handling, and length management during installation or maintenance work. The 10 mm internal diameter provides a defined passage for compressed air or compatible media, while the 12 mm external diameter helps determine fitting and routing compatibility. This Panacea Technology tube is suitable for industrial pneumatic setups requiring a measured tube size, extended roll length, and convenient cutting flexibility for individual connections.

Type of Product : Advanced Polyamide PU Tube

Material : Advanced Polyamide

ID (mm) : 10 mm

Wall Thickness : 1 mm

OD (mm) : 12 mm

Pack of : Roll of 100 m

Explore other Variants (9)

Ships within 5 days

Panacea Technology Advanced Polyamide PU Tube 6 mm OD 3 mm ID (Pack of 100 m Roll)

By Panacea Technology

Roll of 100 metre

₹2,359 - ₹2,477

You save ₹119!

4.58% OFF

Panacea Technology Advanced Polyamide PU Tube 6 mm OD 3 mm ID (Pack of 100 m Roll) is designed for pneumatic air connections where a compact yet clearly defined tube size is required. It features a 6 mm outer diameter and 3 mm inner diameter, providing a 1.5 mm wall thickness for use with compatible pneumatic fittings and connection components. The 100 m roll supplies a continuous length that can be portioned for individual air-line runs, equipment connections, and pneumatic circuit layouts. Its polyamide PU construction makes it suitable for automation equipment, control assemblies, and general industrial pneumatic arrangements where consistent tube dimensions are needed.Panacea Technology Advanced Polyamide PU Tube 6 mm OD 3 mm ID (Pack of 100 m Roll) can be integrated with compatible push-in fittings, valves, regulators, actuators, and other pneumatic accessories. The 3 mm internal diameter establishes the passage size for compatible compressed-air applications, while the 6 mm external dimension helps identify suitable fittings, clips, and supports. Its 100 m roll configuration provides flexibility when preparing different tubing lengths for installation, servicing, or circuit modification. This Panacea Technology tube is suitable for pneumatic setups requiring a defined bore, manageable outer profile, and convenient bulk-length format.

Type of Product : Advanced Polyamide PU Tube

Material : Advanced Polyamide

ID (mm) : 3 mm

Wall Thickness : 1.5 mm

OD (mm) : 6 mm

Pack of : Roll of 100 m

Explore other Variants (9)

Ships within 5 days

Panacea Technology Advanced Polyamide PU Tube 10 mm OD 6.5 mm ID (Pack of 100 m Roll)

By Panacea Technology

Roll of 100 metre

₹5,663 - ₹5,899

You save ₹591!

9.11% OFF

Panacea Technology Advanced Polyamide PU Tube 10 mm OD 6.5 mm ID (Pack of 100 m Roll) is designed for pneumatic installations that require a 6.5 mm internal passage within a 10 mm outer profile. With a 10 mm outer diameter and 6.5 mm inner diameter, the tube has a 1.75 mm wall thickness for use with appropriately matched pneumatic fittings. The 100 m roll configuration provides ample tubing for creating dedicated air paths across automation equipment, machinery, control assemblies, and workshop pneumatic layouts. Its polyamide PU construction offers a practical tubing format for applications where dimensional accuracy and organized routing are important.Panacea Technology Advanced Polyamide PU Tube 10 mm OD 6.5 mm ID (Pack of 100 m Roll) can be integrated into compatible pneumatic circuits using suitable connectors, valves, regulators, cylinders, and actuators. The 6.5 mm bore identifies the internal passage for compressed-air applications, while the 10 mm outside measurement helps determine matching connection and support hardware. The extended 100 m roll can be cut into required sections for new installations, equipment changes, or replacement work. As an Air Hose Coil, this Panacea Technology tube is suited to industrial air-routing requirements where a specific bore-to-outer-diameter combination and convenient roll length are needed.

Type of Product : Advanced Polyamide PU Tube

Material : Advanced Polyamide

ID (mm) : 6.5mm

Wall Thickness : 1.75 mm

OD (mm) : 10 mm

Pack of : Roll of 100 m

Explore other Variants (10)

Ships within 5 days

Panacea Technology Advanced Polyamide PU Tube 6 mm OD 4 mm ID (Pack of 100 m Roll)

By Panacea Technology

Roll of 100 metre

₹1,651 - ₹1,887

Panacea Technology Advanced Polyamide PU Tube 6 mm OD 4 mm ID (Pack of 100 m Roll) is intended for pneumatic systems that require a compact tube with a relatively larger internal passage. It measures 6 mm in outer diameter and 4 mm in inner diameter, providing a 1 mm wall thickness for connection with suitably matched pneumatic fittings. Supplied in a 100 m roll, it offers a long continuous length for preparing individual air-line sections across machinery, automation units, and control assemblies. The polyamide PU construction provides a practical tubing format for organized pneumatic installations where clearly defined dimensions are required.Panacea Technology Advanced Polyamide PU Tube 6 mm OD 4 mm ID (Pack of 100 m Roll) can be used with compatible push-in connectors, valves, regulators, actuators, and other pneumatic components. The 4 mm internal diameter establishes the available passage for compatible compressed air, while the 6 mm external diameter helps determine suitable fittings and securing accessories. Its 100 m roll configuration allows tubing to be measured and cut according to different circuit layouts, connection points, or maintenance requirements. This Panacea Technology tube is suitable for pneumatic applications requiring a specific tube size, practical routing format, and extended roll length.

Type of Product : Advanced Polyamide PU Tube

Material : Advanced Polyamide

ID (mm) : 4 mm

Wall Thickness : 1 mm

OD (mm) : 6 mm

Pack of : Roll of 100 m

Explore other Variants (10)

Ships within 5 days

Panacea Technology Advanced Polyamide PU Tube 4 mm OD 2 mm ID (Pack of 100 m Roll)

By Panacea Technology

Roll of 100 metre

₹1,132 - ₹1,143

You save ₹155!

11.94% OFF

Panacea Technology Advanced Polyamide PU Tube 4 mm OD 2 mm ID (Pack of 100 m Roll) is a compact pneumatic tubing option designed for precise air-line connections and space-conscious routing. It features a 4 mm outer diameter and 2 mm inner diameter, providing a 1 mm wall thickness for use with suitably matched pneumatic fittings and components. Supplied in a 100 m roll, the tube offers an extended continuous length that can be measured and cut for individual connection points. Its polyamide PU construction is suited to pneumatic control arrangements, instrumentation lines, compact machinery, and automation assemblies where small-diameter tubing is required.Panacea Technology Advanced Polyamide PU Tube 4 mm OD 2 mm ID (Pack of 100 m Roll) can be used with compatible push-in fittings, valves, regulators, actuators, and other pneumatic accessories. The narrow profile makes it appropriate for installations where tubing needs to be routed through confined spaces or around closely positioned components. Its 2 mm internal diameter establishes the available passage, while the 4 mm external dimension provides a reference for selecting compatible fittings and supports. The 100 m roll format also allows tubing sections to be prepared according to the layout of individual pneumatic circuits and equipment.

Type of Product : Advanced Polyamide PU Tube

Material : Advanced Polyamide

ID (mm) : 2 mm

Wall Thickness : 1 mm

OD (mm) : 4 mm

Pack of : Roll of 100 m

Explore other Variants (9)

Ships within 5 days

Panacea Technology Advanced Polyamide PU Tube 10 mm OD 7 mm ID (Pack of 100 m Roll)

By Panacea Technology

Roll of 100 metre

₹4,719 - ₹4,837

You save ₹473!

8.91% OFF

Panacea Technology Advanced Polyamide PU Tube 10 mm OD 7 mm ID (Pack of 100 m Roll) is a pneumatic tubing choice with a 10 mm outer diameter and 7 mm inner diameter, providing a 1.5 mm wall thickness for compatible air-line connections. Its dimensional profile is suited to pneumatic layouts where the tube size needs to be matched precisely with fittings and connected components. Supplied in a 100 m roll, it provides a long continuous length that can be divided into sections for machine connections, automation equipment, control systems, and workshop air circuits. The polyamide PU construction gives the tubing a practical format for organized installation and routing.Panacea Technology Advanced Polyamide PU Tube 10 mm OD 7 mm ID (Pack of 100 m Roll) can be used with suitably sized push-in fittings, valves, regulators, cylinders, actuators, and other pneumatic hardware. The 7 mm internal bore establishes the available passage for compatible compressed-air applications, while the 10 mm outside diameter assists in identifying matching connection accessories and tube supports. Its 100 m roll format is useful when multiple tube sections are required across a pneumatic setup, allowing lengths to be prepared according to individual routing requirements. This Air Hose Coil from Panacea Technology is suitable for industrial applications requiring defined tube dimensions and extended tubing supply.

Type of Product : Advanced Polyamide PU Tube

Material : Advanced Polyamide

ID (mm) : 7 mm

Wall Thickness : 1.5 mm

OD (mm) : 10 mm

Pack of : Roll of 100 m

Explore other Variants (10)

Ships within 5 days

Panacea Technology Advanced Polyamide PU Tube 4 mm OD 2.5 mm ID (Pack of 100 m Roll)

By Panacea Technology

Roll of 100 metre

₹1,025 - ₹1,049

You save ₹131!

11.1% OFF

Panacea Technology Advanced Polyamide PU Tube 4 mm OD 2.5 mm ID (Pack of 100 m Roll) is a compact tubing solution for pneumatic circuits that require a specific bore size within a slim external profile. It measures 4 mm in outer diameter and 2.5 mm in inner diameter, giving a 0.75 mm wall thickness for connection with appropriately sized pneumatic fittings. Supplied as a 100 m roll, it provides ample tubing length for multiple air-line sections, equipment connections, and routing requirements. The polyamide PU construction is suitable for organized pneumatic assemblies, automation equipment, and control systems where small-format tubing is required.Panacea Technology Advanced Polyamide PU Tube 4 mm OD 2.5 mm ID (Pack of 100 m Roll) can be paired with compatible push-in fittings, miniature valves, regulators, actuators, and pneumatic connectors. Its 2.5 mm internal diameter defines the passage for compatible compressed-air applications, while the 4 mm outer diameter assists in identifying suitable connection hardware. The 100 m roll allows users to cut precise sections for different circuit layouts without requiring individually measured lengths. This Panacea Technology tube is suitable for compact pneumatic installations where dimensional accuracy, manageable tubing, and extended roll length are important considerations.

Type of Product : Advanced Polyamide PU Tube

Material : Advanced Polyamide

ID (mm) : 2.5 mm

Wall Thickness : 0.75 mm

OD (mm) : 4 mm

Pack of : Roll of 100 m

Explore other Variants (10)

Ships within 5 days

Panacea Technology PU Ester Tube 14 mm OD 10 mm ID (Pack of 100 m Roll)

By Panacea Technology

Roll of 100 metre

₹12,979 - ₹12,979

You save ₹1,299!

9.1% OFF

Panacea Technology PU Ester Tube 14 mm OD 10 mm ID (Pack of 100 m Roll) is a pneumatic tube with a 14 mm outside diameter and 10 mm inside diameter, giving a calculated wall thickness of 2 mm. The PU Ester material specification identifies its construction for compressed-air tubing applications, while the stated dimensions help in selecting appropriate connection components. This tube can be considered for pneumatic machinery, automated equipment, control systems, and air-line assemblies where a defined tube size is required. Supplied in a 100 m roll, it provides a continuous length that can be measured and cut according to individual routing, installation, and equipment requirements.Panacea Technology PU Ester Tube 14 mm OD 10 mm ID (Pack of 100 m Roll) can be matched with compatible pneumatic fittings, connectors, valves, regulators, cylinders, actuators, clamps, and other tube accessories. Its 10 mm internal diameter establishes the available air passage, while the 14 mm outer diameter serves as a dimensional reference for connection and support hardware. The roll format is suited to installations involving multiple tube sections, machine assembly, maintenance work, replacement runs, or pneumatic circuit changes. Listed under the Air Hose Coil category, this Panacea Technology PU Ester tube provides a defined material and dimensional option for pneumatic air routing.

Type of Product : PU Ester Tube

Material : PU Ester

ID (mm) : 10 mm

Working Pressure : Vacuum to 12 Bar

Wall Thickness : 2 mm

OD (mm) : 14 mm

Working Temperature : -20 to + 70 °C

Pack of : Roll of 100 m

Explore other Variants (18)

Ships within 5 days

Panacea Technology PU Ester Tube 16 mm OD 11 mm ID (Pack of 100 m Roll)

By Panacea Technology

Roll of 100 metre

₹18,879 - ₹18,879

You save ₹1,771!

8.58% OFF

Panacea Technology PU Ester Tube 16 mm OD 11 mm ID (Pack of 100 m Roll) is a pneumatic tubing solution designed for air transfer applications where a consistent tube profile and suitable dimensional fit are required. Featuring a 16 mm outer diameter and 11 mm inner diameter, this PU ester tube provides a defined passage for compressed air within compatible pneumatic arrangements. Supplied as a 100 m roll, it offers a practical length format for installation across different equipment layouts while helping reduce the need for frequent joints. The polyurethane construction is suitable for pneumatic setups that require flexible tubing for routing between components.Panacea Technology PU Ester Tube 16 mm OD 11 mm ID (Pack of 100 m Roll) can be used with compatible pneumatic fittings, valves, air preparation units, and other compressed-air components where the specified tube dimensions are appropriate. Its roll format allows the tubing to be measured and cut according to installation requirements, making it useful for organized air-line routing in machinery, automation systems, and workshop pneumatic circuits. As an Air Hose Coil product from Panacea Technology, it combines clearly defined dimensional specifications with a convenient 100 m supply length for pneumatic applications.

Type of Product : PU Ester Tube

Material : PU Ester

ID (mm) : 11 mm

Working Pressure : Vacuum to 12 Bar

Wall Thickness : 2.5 mm

OD (mm) : 16 mm

Working Temperature : -20 to + 70 °C

Pack of : Roll of 100 m

Explore other Variants (18)

Ships within 5 days

Panacea Technology PU Ester Tube 12 mm OD 8 mm ID (Pack of 100 m Roll)

By Panacea Technology

Roll of 100 metre

₹10,383 - ₹10,619

You save ₹1,299!

10.9% OFF

Panacea Technology PU Ester Tube 12 mm OD 8 mm ID (Pack of 100 m Roll) is suited to pneumatic installations that require a 12 mm outer diameter and 8 mm inner diameter for compressed-air routing. Formed from PU ester material, the tubing offers a flexible profile for connecting compatible pneumatic components and arranging air lines around machinery. Its defined dimensional specifications help in identifying appropriate fittings, connectors, and related accessories for assembly. Supplied in a 100 m roll, it provides a continuous tubing length that can be measured and cut into sections according to the layout of the pneumatic system. This roll format is suitable for installations with multiple air-line connections and varied routing distances.Panacea Technology PU Ester Tube 12 mm OD 8 mm ID (Pack of 100 m Roll) can be used with compatible pneumatic valves, regulators, push-in fittings, air preparation units, and automation equipment. The 8 mm internal diameter specifies the tube's air passage, while the 12 mm outer diameter establishes its external size for connection matching. Its PU ester construction supports flexible routing between components in machinery, control equipment, and workshop pneumatic circuits. The 100 m supply length allows individual tube sections to be prepared according to installation requirements. Listed under the Air Hose Coil category, this Panacea Technology tube is designed for compressed-air line applications.

Type of Product : PU Ester Tube

Material : PU Ester

ID (mm) : 8 mm

Wall Thickness : 2 mm

OD (mm) : 12 mm

Working Temperature : -20 to + 70 °C

Radius : 35

Pack of : Roll of 100 m

Explore other Variants (18)

Ships within 5 days

Panacea Technology PU Ester Tube 16 mm OD 12 mm ID (Pack of 100 m Roll)

By Panacea Technology

Roll of 100 metre

₹15,339 - ₹15,339

You save ₹1,299!

7.81% OFF

Panacea Technology PU Ester Tube 16 mm OD 12 mm ID (Pack of 100 m Roll) is designed for pneumatic air routing where accurate tube dimensions and dependable compatibility with fittings are essential. With a 16 mm outer diameter and 12 mm inner diameter, this PU ester tube provides a defined internal passage for compressed-air movement through suitable pneumatic circuits. The polyurethane construction offers a flexible tubing format that can be routed around equipment and connected components according to installation requirements. Supplied in a 100 m roll, it provides a substantial continuous length for planned pneumatic layouts and helps simplify cutting and positioning during installation.Panacea Technology PU Ester Tube 16 mm OD 12 mm ID (Pack of 100 m Roll) is suitable for use with compatible pneumatic fittings, valves, air preparation assemblies, and other compressed-air equipment matching its specified dimensions. The roll configuration makes it convenient for creating customized tube lengths across machinery, automation equipment, and workshop air systems. Its defined 16 mm OD and 12 mm ID specifications also make selection easier when matching tubing with the required connectors and components. Listed under the Air Hose Coil category, this Panacea Technology tube is intended for structured pneumatic air-line installation and routing applications.

Type of Product : PU Ester Tube

Material : PU Ester

ID (mm) : 12 mm

Working Pressure : Vacuum to 12 Bar

Wall Thickness : 2 mm

OD (mm) : 16 mm

Working Temperature : -20 to + 70 °C

Pack of : Roll of 100 m

Explore other Variants (18)

Ships within 5 days

Panacea Technology Male Elbow L Push Fitting L Shape Thermoplastic Polymer & Brass Material (Diameter 4 to 16 mm)

By Panacea Technology

₹42 - ₹294

Panacea Technology Male Elbow L Push Fitting L Shape Thermoplastic Polymer & Brass Material is a pneumatic fitting designed to provide a right-angle connection between compatible tubing and pneumatic components. Its L-shaped body changes the direction of the connected line, making it useful for routing tubing around equipment, within compact assemblies, or between closely positioned components. The fitting combines thermoplastic polymer and brass material as specified for its construction, providing a suitable combination for compatible pneumatic installations. Its male configuration offers a threaded connection interface for integration with corresponding female ports or components. This product is part of the Pneumatic Fittings category and is suitable for pneumatic machinery, automation equipment, control assemblies, valves, and air-line systems.The Panacea Technology Male Elbow L Push Fitting L Shape Thermoplastic Polymer & Brass Material features a push-fit tube connection alongside its male interface, allowing the fitting to serve as a directional link within a pneumatic circuit. The 90-degree layout helps position tubing without requiring a separate angled section, which can simplify routing around fixed components. Its compact L profile is suitable for installations where available space needs to be used efficiently. Thermoplastic polymer and brass form the specified material combination, while the male connection provides compatibility with matching pneumatic components. This Panacea Technology fitting is intended for applications requiring a secure directional transition between a push-connected tube and a suitable threaded connection point.

Shape : L Shape

Material : Thermoplastic Polymer & Brass

Type of Product : Male Elbow L Push Fitting

Color : Black

Explore other Variants (22)

Ships within 5 days

Panacea Technology Straight Push Fittings Straight Thermoplastic Polymer & Brass Material (Diameter 4 to 16 mm)

By Panacea Technology

₹34 - ₹235

Panacea Technology Straight Push Fittings Straight Thermoplastic Polymer & Brass Material is an inline pneumatic fitting designed to connect compatible tubing along a continuous, straight path. Its straight configuration maintains the direction of the connected air line, making it suitable for assemblies where a direct tube-to-tube connection is required without branching or angular routing. The push-fit design provides a practical connection format for compatible pneumatic tubing, while the specified thermoplastic polymer and brass material combination defines its construction. This component belongs to the Pneumatic Fittings category and can be integrated into pneumatic circuits, automation equipment, air distribution arrangements, control systems, and machinery.The Panacea Technology Straight Push Fittings Straight Thermoplastic Polymer & Brass Material provides a simple joining solution for pneumatic layouts that rely on linear tubing runs. Its inline body helps maintain an uninterrupted route between connected sections, making the fitting suitable for extending or linking compatible tubes within an air circuit. The straight form avoids the directional change associated with elbow fittings and the branching arrangement found in tee or Y connectors. Thermoplastic polymer and brass provide the specified material composition, while the push connection format supports direct integration with compatible tubing. This Panacea Technology fitting is intended for pneumatic assemblies requiring a straightforward, straight-line connection between tubing sections.

Shape : Straight

Material : Thermoplastic Polymer & Brass

Type of Product : Straight Push Fittings

Color : Silver

Explore other Variants (22)

Ships within 5 days

Panacea Technology Bulkhead Female Straight Push in Fittings Thermoplastic Polymer & Brass Material (Diameter 4 to 12 mm)

By Panacea Technology

₹35 - ₹164

Panacea Technology Bulkhead Female Straight Push in Fittings Bulkhead Female Straight Thermoplastic Polymer & Brass Material is designed for making a straight pneumatic connection through a panel, enclosure, or mounting surface. Its bulkhead-style configuration provides a fixed passage between tubing sections positioned on opposite sides of a surface, helping maintain a neat and organised pneumatic layout. The fitting uses thermoplastic polymer and brass material, combining two materials within its construction for practical installation in compatible air-line assemblies. Its straight form is suitable for applications where tubing needs to pass directly through a mounting point without changing the direction of the line. This fitting belongs to the Pneumatic Fittings category and is intended for compatible pneumatic tubing systems.The Panacea Technology Bulkhead Female Straight Push in Fittings Bulkhead Female Straight Thermoplastic Polymer & Brass Material incorporates a push-in connection arrangement for convenient tube insertion during pneumatic assembly. The female bulkhead design provides a threaded connection interface while the straight body maintains a direct route for the connected tube. It can be used around control panels, pneumatic machinery, automation equipment, manifolds, and other installations requiring a panel-mounted connection. The compact configuration helps utilise available mounting space efficiently and keeps tubing pathways orderly. With its specific bulkhead construction and polymer-brass material combination, this Panacea Technology fitting is suited to pneumatic setups requiring a straight, surface-mounted connection.

Shape : Bulkhead Female Straight

Material : Thermoplastic Polymer & Brass

Type of Product : Bulkhead Female Straight Push in Fittings

Color : Silver

Explore other Variants (20)

Ships within 5 days

Panacea Technology Union Straight Push Fitting Round Thermoplastic Polymer & Brass Material (Diameter 4 to 16 mm)

By Panacea Technology

₹25 - ₹112

Panacea Technology Union Straight Push Fitting Round Thermoplastic Polymer & Brass Material is a practical component designed for pneumatic air-line connections where a straight union arrangement is required. Listed under the Pneumatic Fittings category, this fitting provides a direct joining point between compatible pneumatic tubes while maintaining a compact round profile. Its thermoplastic polymer and brass construction combines a lightweight outer body with a metal connection component, making it suitable for use in organised pneumatic assemblies. The union-style configuration allows two tube sections to be connected in a straight path, helping maintain a neat routing layout within equipment and systems.The Panacea Technology Union Straight Push Fitting Round Thermoplastic Polymer & Brass Material is suited to applications involving pneumatic tubing in machinery, automation setups, control systems, and general air circuits. Its push-fitting design supports straightforward tube insertion and removal during installation or maintenance, while the union configuration provides a convenient connection between separate tubing lengths. The round form factor helps accommodate the fitting within compact assembly spaces. With its clearly defined connection purpose and combination of thermoplastic polymer and brass materials, this Panacea Technology pneumatic fitting can be selected for tube joining requirements where a straight, space-conscious connection is needed.

Shape : Round

Material : Thermoplastic Polymer & Brass

Type of Product : Union Straight Push Fitting

Color : Black

Explore other Variants (6)

Ships within 5 days

Panacea Technology Filter & Regulator 10 Bar, Polycarbonate Container Material (Port Size M5 to G1 inch)

By Panacea Technology

₹1,037 - ₹3,303

You save ₹385!

10.43% OFF

The Panacea Technology Filter & Regulator 10 Bar, Polycarbonate Container Material combines air filtration and pressure regulation functions within a single pneumatic component. Designed for compressed-air systems, it helps condition the incoming air while allowing the operating pressure to be adjusted according to the requirements of the connected circuit. The unit is rated for up to 10 Bar and features a polycarbonate container material that provides a clear view of the internal bowl area during routine checks. As a product listed under the Solenoid Valve category, it is suited to pneumatic arrangements involving valves, actuators, and other air-operated components where controlled and filtered air is required.The Panacea Technology Filter & Regulator 10 Bar, Polycarbonate Container Material is appropriate for pneumatic control assemblies used in industrial automation, machinery, and air-powered equipment. Its two-in-one configuration helps streamline air preparation by combining filtration and pressure adjustment in one unit rather than using separate components for each function. The 10 Bar rating defines its pressure-handling range, while the polycarbonate container supports convenient visual observation during maintenance. This configuration makes it a practical choice for installations requiring a compact air treatment component with both filtration and regulation capabilities.

Type of Product : Filter & Regulator

Working Pressure : 10 Bar

Container Material : Polycarbonate

Explore other Variants (10)

Ships within 5 days

Panacea Technology Lubricator 10 Bar, Polycarbonate Container Material (Port Size G1/7 to G1 inch)

By Panacea Technology

₹506 - ₹2,477

You save ₹305!

11.46% OFF

Panacea Technology Lubricator 10 Bar, Polycarbonate Container Material is a pneumatic air-line component designed to introduce a controlled amount of lubricant into compressed air systems. It features a polycarbonate container that provides a clear view of the lubricant level, helping with routine inspection during operation and maintenance. With a specified pressure rating of 10 Bar, this lubricator can be selected for pneumatic setups according to their operating requirements. Its dedicated lubrication function makes it suitable for air circuits where pneumatic components require oil mist for proper operation. The product belongs to the Solenoid Valve category and is offered under the Panacea Technology brand.Panacea Technology Lubricator 10 Bar, Polycarbonate Container Material is suited for pneumatic equipment, automation assemblies, and compressed air lines that incorporate air-operated components. The lubricator is positioned within the air circuit to support consistent lubrication of compatible downstream equipment. Its polycarbonate container combines functional visibility with a practical form for checking the lubricant condition and level. The 10 Bar specification provides a defined reference when matching the component with an appropriate pneumatic system. By focusing on air-line lubrication in a compact component, this product fits applications where pneumatic equipment requires a dedicated lubricating element within the overall air preparation arrangement.

Type of Product : Lubricator

Working Pressure : 10 Bar

Container Material : Polycarbonate

Explore other Variants (10)

Ships within 5 days

Panacea Technology Regulator 10 Bar, Polycarbonate Container Material (Port Size G1/7 to G1 inch)

By Panacea Technology

₹789 - ₹2,477

You save ₹305!

11.46% OFF

Panacea Technology Regulator 10 Bar, Polycarbonate Container Material is designed for pneumatic air preparation applications where controlled pressure is important for connected equipment. Featuring a polycarbonate container, this regulator is suited to compressed-air systems that require a clear and practical container construction. The 10 Bar specification identifies its pressure-handling rating, while the regulator function allows air pressure to be adjusted to the desired operating level. Its compact configuration makes it suitable for integration into pneumatic circuits, control panels, and air-line assemblies. As a Panacea Technology product listed under the Solenoid Valve category, it can be used alongside pneumatic components where regulated air supply is required.Panacea Technology Regulator 10 Bar, Polycarbonate Container Material offers a straightforward solution for maintaining an appropriate pressure level within pneumatic equipment. The transparent nature of polycarbonate allows convenient visual observation of the container during routine system checks, while its application-oriented construction supports installation in compressed-air arrangements. It can be incorporated into machinery, automation setups, and general industrial pneumatic lines where pressure regulation forms part of the air management system. The product is identified by its 10 Bar rating and polycarbonate container material, making these specifications useful for catalogue selection and component matching. Its dedicated regulator design provides a practical addition to pneumatic assemblies requiring controlled air pressure.

Type of Product : Regulator

Working Pressure : 10 Bar

Container Material : Polycarbonate

Explore other Variants (10)

Ships within 5 days

Panacea Technology Air Filter 10 Bar, Polycarbonate Container Material (Port Size M5 to G1 inch)

By Panacea Technology

₹412 - ₹2,123

You save ₹132!

5.85% OFF

Panacea Technology Air Filter 10 Bar, Polycarbonate Container Material is designed for pneumatic air preparation systems where clean compressed air is required for downstream components. Its air filter function helps separate contaminants from the air stream before it reaches connected pneumatic equipment. The polycarbonate container provides a clear construction that allows the internal condition of the filter area to be observed during routine inspection. With a 10 Bar specification, this component is suited to compressed-air arrangements requiring filtration within the specified pressure range. As a Panacea Technology product under the Solenoid Valve category, it can be integrated into pneumatic circuits, air-line assemblies, automation equipment, and industrial machinery. Its defined pressure rating and container material also make identification and selection easier during catalogue evaluation.Panacea Technology Air Filter 10 Bar, Polycarbonate Container Material offers a practical filtration component for compressed-air management applications. The transparent polycarbonate container supports convenient visual checking, while the dedicated filter configuration fits into pneumatic air preparation setups. It can be used where air quality is an important part of maintaining pneumatic component operation and system cleanliness. The 10 Bar rating provides a clear specification for matching the filter with compatible air circuits and equipment. Its compact construction allows integration into various pneumatic installations without adding unnecessary complexity. Suitable for industrial air lines and automation systems, this Panacea Technology air filter combines a defined pressure specification with a polycarbonate container for straightforward component selection and routine system inspection.

Type of Product : Air Filter

Working Pressure : 10 Bar

Container Material : Polycarbonate

Explore other Variants (10)

Ships within 5 days

Panacea Technology Air Filter Combined Diad 10 Bar, Polycarbonate Container Material (Port Size M5 to G1 inch)

By Panacea Technology

₹1,769 - ₹5,663

You save ₹895!

13.65% OFF

The Panacea Technology Air Filter Combined Diad 10 Bar, Polycarbonate Container Material is designed for compressed-air filtration in pneumatic systems where air quality is important for downstream components. As a product under the Solenoid Valve category, it can be incorporated into pneumatic air preparation arrangements to help separate dust, moisture, and other unwanted particles from the air stream. The unit has a 10 Bar pressure rating, making it suitable for pneumatic circuits operating within the specified pressure limit. Its polycarbonate container material provides a transparent housing, allowing the internal condition of the filter bowl to be observed during inspection and servicing.With its combined design, the Panacea Technology Air Filter Combined Diad 10 Bar, Polycarbonate Container Material is suited to air-line installations used in automation equipment, industrial machinery, and other pneumatic applications. Filtering compressed air before it passes to valves, actuators, and related components helps maintain a cleaner air supply within the circuit. The polycarbonate container also supports convenient visual checking without relying solely on external indicators. Its defined pressure rating, container material, and combined configuration make it a practical filtration component for pneumatic air management systems.

Type of Product : Air Filter Combined Diad

Working Pressure : 10 Bar

Container Material : Polycarbonate

Explore other Variants (9)

Ships within 5 days

Panacea Technology Air Filter Combined Triplet 10 Bar, Polycarbonate Container Material (Port Size M5 to G1 inch)

By Panacea Technology

₹2,005 - ₹6,253

You save ₹917!

12.79% OFF

Panacea Technology Air Filter Combined Triplet 10 Bar, Polycarbonate Container Material is a pneumatic air preparation assembly designed to support cleaner and better-conditioned compressed air in fluid power systems. Built with a polycarbonate container, this unit combines essential air treatment functions within a compact triplet configuration. Its 10 Bar pressure rating makes it suitable for pneumatic applications operating within the specified pressure range. The integrated arrangement helps streamline installation where multiple air preparation functions are required together, while the transparent container allows convenient visual observation of the collected contents. This product is listed under the Solenoid Valve category and carries the Panacea Technology brand.Panacea Technology Air Filter Combined Triplet 10 Bar, Polycarbonate Container Material can be used in pneumatic equipment and air circuits where filtration and controlled air preparation are required as part of the system setup. The combined construction helps reduce the need for separate components, supporting an organised pneumatic layout and efficient use of installation space. Its polycarbonate container provides a practical housing solution for routine inspection and handling. The defined 10 Bar rating offers a clear specification for selecting the product according to system requirements. With its focused design and stated construction details, this air filter combined triplet is suited to industrial pneumatic installations requiring a compact air preparation component.

Type of Product : Air Filter Combined Triplet

Working Pressure : 10 Bar

Container Material : Polycarbonate

Explore other Variants (10)

Ships within 15 days

Panacea Technology PA12 Tube 16 mm OD 11 mm ID (Pack of 100 m Roll)

By Panacea Technology

Roll of 100 metre

₹51,919 - ₹51,919

You save ₹4,131!

7.37% OFF

Panacea Technology PA12 Tube 16 mm OD 11 mm ID (Pack of 100 m Roll) is a pneumatic tubing option with a 16 mm outer diameter and 11 mm inner diameter, providing a calculated wall thickness of 2.5 mm. The defined bore is suitable for pneumatic air passage when paired with correctly sized connection components. Its PA12 construction identifies the tube material, while the dimensional profile supports accurate selection for air-line layouts, machine assemblies, automation equipment, and pneumatic control arrangements. Supplied as a 100 m roll, the tubing can be measured and cut into required lengths for different installation requirements.Panacea Technology PA12 Tube 16 mm OD 11 mm ID (Pack of 100 m Roll) can be used with compatible pneumatic fittings, connectors, valves, regulators, cylinders, and actuators according to system specifications. The 11 mm internal diameter defines the passage size, while the 16 mm outside diameter helps determine suitable clamps, supports, and connection hardware. The 100 m roll format allows users to prepare tube sections for equipment installation, replacement, maintenance, or pneumatic circuit routing. Classified under the Air Hose Coil category, this Panacea Technology product offers a clearly specified PA12 tube size for industrial compressed-air applications.

Type of Product : PA12 Tube

Material : PA12

ID (mm) : 11 mm

Working Pressure : Vacuum to 50 Bar

Wall Thickness : 2.5 mm

OD (mm) : 16 mm

Working Temperature : -40 to + 100 °C

Radius : 90

Pack of : Roll of 100 m

Explore other Variants (10)

Ships within 15 days

Panacea Technology PA12 Tube 14 mm OD 11 mm ID (Pack of 100 m Roll)

By Panacea Technology

Roll of 100 metre

₹10,029 - ₹42,479

You save ₹4,013!

8.63% OFF

Panacea Technology PA12 Tube 14 mm OD 11 mm ID (Pack of 100 m Roll) is designed for pneumatic air-line applications requiring an 11 mm internal passage within a 14 mm outer profile. It features a 14 mm outer diameter and 11 mm inner diameter, resulting in a 1.5 mm wall thickness for use with appropriately matched pneumatic fittings. The 100 m roll format provides a continuous tubing length that can be divided according to the requirements of automation machinery, pneumatic control systems, equipment connections, and industrial air circuits. Its PA12 construction offers a clearly defined material specification for applications where both tube composition and dimensional compatibility are considered.Panacea Technology PA12 Tube 14 mm OD 11 mm ID (Pack of 100 m Roll) can be integrated with suitable push-in connectors, valves, regulators, cylinders, actuators, and related pneumatic components. The 11 mm bore establishes the internal passage, while the 14 mm external dimension helps in identifying compatible fittings, clamps, and tube supports. Supplied in a 100 m roll, the tubing can be prepared into sections for new installations, replacement work, machine connections, or pneumatic circuit modifications. Listed under the Air Hose Coil category, this Panacea Technology tube provides a defined PA12 profile for organized compressed-air routing in industrial setups.

Type of Product : PA12 Tube

Material : PA12

ID (mm) : 11 mm

Working Pressure : Vacuum to 50 Bar

Wall Thickness : 1.5 mm

OD (mm) : 14 mm

Working Temperature : -40 to + 100 °C

Radius : 80

Pack of : Roll of 100 m

Explore other Variants (9)

Ships within 15 days

Panacea Technology PA12 Tube 16 mm OD 12 mm ID (Pack of 100 m Roll)

By Panacea Technology

Roll of 100 metre

₹42,479 - ₹42,479

You save ₹4,013!

8.63% OFF

Panacea Technology PA12 Tube 16 mm OD 12 mm ID (Pack of 100 m Roll) is a pneumatic tubing component specified with a 16 mm outside diameter and 12 mm inside diameter, giving a calculated wall thickness of 2 mm. The larger 12 mm bore provides a defined internal path for compatible pneumatic air circuits, while the 16 mm external dimension helps in selecting matching fittings and tube accessories. Manufactured with PA12 material, this tube is suited to applications involving pneumatic machinery, automation assemblies, control systems, and equipment air connections. The 100 m roll format allows the tubing to be portioned into lengths according to installation requirements.Panacea Technology PA12 Tube 16 mm OD 12 mm ID (Pack of 100 m Roll) can be incorporated with suitably sized connectors, push-in fittings, valves, regulators, cylinders, and actuators based on the system configuration. Its dimensional combination provides a clear reference when planning tube routing, connection points, clamps, and supports. The continuous roll length is useful for preparing multiple sections during machine installation, replacement work, maintenance, or pneumatic circuit adjustments. Listed under the Air Hose Coil category, this Panacea Technology PA12 tube provides a defined size and material profile for organized compressed-air connections.

Type of Product : PA12 Tube

Material : PA12

ID (mm) : 12 mm

Working Pressure : Vacuum to 50 Bar

Wall Thickness : 2 mm

OD (mm) : 16 mm

Working Temperature : -40 to + 100 °C

Radius : 90

Pack of : Roll of 100 m

Explore other Variants (10)

Ships within 15 days

Panacea Technology PA12 Tube 4 mm OD 2 mm ID (Pack of 100 m Roll)

By Panacea Technology

Roll of 100 metre

₹3,539 - ₹21,239

You save ₹591!

11.92% OFF

Panacea Technology PA12 Tube 4 mm OD 2 mm ID (Pack of 100 m Roll) is a compact pneumatic tube designed with a 4 mm outer diameter and 2 mm inner diameter, giving it a calculated wall thickness of 1 mm. Its small internal passage makes the dimensional profile relevant for pneumatic control layouts, compact equipment connections, instrumentation, and automation assemblies where appropriately sized tubing is required. Constructed from PA12, the tube has a defined material specification for system selection and component matching. The 100 m roll provides a continuous length that can be divided into individual sections according to the requirements of the installation.Panacea Technology PA12 Tube 4 mm OD 2 mm ID (Pack of 100 m Roll) can be paired with compatible miniature pneumatic fittings, connectors, valves, regulators, actuators, and other components. The 2 mm bore establishes the internal passage, while the 4 mm outside diameter serves as a reference for selecting suitable connection hardware and tube supports. Its roll format is convenient for preparing multiple lengths during machine assembly, maintenance, replacement, or pneumatic circuit routing. Listed under the Air Hose Coil category, this Panacea Technology PA12 tube provides a clearly defined small-diameter option for organized pneumatic connections.

Type of Product : PA12 Tube

Material : PA12

ID (mm) : 2 mm

Working Pressure : Vacuum to 50 Bar

Wall Thickness : 1 mm

OD (mm) : 4 mm

Working Temperature : -40 to + 100 °C

Pack of : Roll of 100 m

Explore other Variants (9)

Ships within 15 days

Panacea Technology PA12 Tube 4 mm OD 2.5 mm ID (Pack of 100 m Roll)

By Panacea Technology

Roll of 100 metre

₹3,539 - ₹3,539

You save ₹473!

11.79% OFF

Panacea Technology PA12 Tube 4 mm OD 2.5 mm ID (Pack of 100 m Roll) is a small-format pneumatic tubing option featuring a 4 mm outer diameter and 2.5 mm inner diameter, resulting in a calculated wall thickness of 0.75 mm. Its compact profile is suited to pneumatic layouts where space-conscious tube dimensions are required for equipment connections, control assemblies, instrumentation, and automation systems. Made with PA12 material, it offers a defined construction specification for selecting tubing according to system requirements. The 100 m roll format provides a continuous length that can be measured and separated into individual sections for installation or replacement work.Panacea Technology PA12 Tube 4 mm OD 2.5 mm ID (Pack of 100 m Roll) can be matched with appropriately sized pneumatic fittings, miniature connectors, valves, regulators, actuators, and related components. The 2.5 mm internal diameter identifies the available passage, while the 4 mm outside diameter helps establish compatibility with connection hardware and supports. The extended roll length is practical when multiple tube sections are needed across machinery or pneumatic circuits. Classified under the Air Hose Coil category, this Panacea Technology PA12 tube provides a clearly defined dimensional combination for compact compressed-air connections.

Type of Product : PA12 Tube

Material : PA12

ID (mm) : 2.5 mm

Working Pressure : Vacuum to 50 Bar

Wall Thickness : 0.75 mm

OD (mm) : 4 mm

Working Temperature : -40 to + 100 °C

Radius : 10

Pack of : Roll of 100 m

Explore other Variants (10)

Ships within 15 days

Panacea Technology PA12 Tube 6 mm OD 4 mm ID (Pack of 100 m Roll)

By Panacea Technology

Roll of 100 metre

₹7,197 - ₹7,197

You save ₹1,063!

12.87% OFF

Panacea Technology PA12 Tube 6 mm OD 4 mm ID (Pack of 100 m Roll) features a 6 mm outer diameter and 4 mm inner diameter, giving the tube a calculated wall thickness of 1 mm. This dimensional configuration provides a defined internal passage for compatible pneumatic air connections and supports accurate matching with suitable fittings. Made from PA12, the tubing is specified for use across pneumatic equipment, automation assemblies, control arrangements, and machine air-line layouts. The 100 m roll format provides a continuous supply that can be divided into application-specific lengths, making it suitable for installations where several tube sections are required.Panacea Technology PA12 Tube 6 mm OD 4 mm ID (Pack of 100 m Roll) can be incorporated with appropriately sized push-in fittings, connectors, valves, regulators, cylinders, actuators, and related pneumatic components. Its 4 mm bore and 6 mm external diameter provide clear dimensional references when selecting connection accessories, clamps, and supports. The roll can be cut according to routing requirements during equipment assembly, maintenance, replacement, or pneumatic circuit modification. Categorized under Air Hose Coil, this Panacea Technology PA12 tube offers a specific size combination for structured compressed-air connections in industrial and automation applications.

Type of Product : PA12 Tube

Material : PA12

ID (mm) : 4 mm

Working Pressure : Vacuum to 50 Bar

Wall Thickness : 1 mm

OD (mm) : 6 mm

Working Temperature : -40 to + 100 °C

Radius : 15

Pack of : Roll of 100 m

Explore other Variants (10)

Ships within 15 days

Panacea Technology PA12 Tube 6 mm OD 3 mm ID (Pack of 100 m Roll)

By Panacea Technology

Roll of 100 metre

₹7,197 - ₹30,679

You save ₹1,063!

12.87% OFF

Panacea Technology PA12 Tube 6 mm OD 3 mm ID (Pack of 100 m Roll) is a precision-sized pneumatic tube with a 6 mm outside diameter and 3 mm inside diameter, providing a calculated wall thickness of 1.5 mm. The balanced dimensional profile makes it suitable for pneumatic control arrangements, automation equipment, instrumentation connections, and compact air-line assemblies that require correctly sized tubing. Its PA12 construction gives the product a clearly defined material specification for catalogue selection and system planning. Supplied in a 100 m roll, the tube offers sufficient continuous length for preparing individual sections according to the layout of the pneumatic installation.Panacea Technology PA12 Tube 6 mm OD 3 mm ID (Pack of 100 m Roll) can be connected with suitable pneumatic fittings, push-in connectors, valves, regulators, cylinders, actuators, and other compatible components. The 3 mm internal diameter identifies the air passage, while the 6 mm external diameter helps determine suitable connection hardware, clips, and tube supports. The roll format allows users to cut required lengths for machine assembly, servicing, replacement, or circuit reconfiguration. Classified under the Air Hose Coil category, this Panacea Technology tube provides a defined PA12 profile for compact compressed-air routing and pneumatic equipment connections.

Type of Product : PA12 Tube

Material : PA12

ID (mm) : 3 mm

Working Pressure : Vacuum to 50 Bar

Wall Thickness : 1.5 mm

OD (mm) : 6 mm

Working Temperature : -40 to + 100 °C

Radius : 15

Pack of : Roll of 100 m

Explore other Variants (9)

Previous Next

Page 1 of 4 results