Have a question? Call us now at +91 9650660070

care@industrybuying.com

Proskit Network Installation Instruments

Showing 18 out of 18 products

Sort by

Ships within 24 hrs

Pro'sKit MT-7063 PoE & Lan Cable Tester

By ProsKit

₹2,949 ~~₹4,754~~

You save ₹1,805!

37.97% OFF

Pro'sKit MT-7063 PoE & Lan Cable Tester, is a Lightweight and compact tester for verifying LAN/telecom cable (RJ45/RJ11/RJ12) wiring (open/short/cross) as well as checking for mid- or end-span Power-over-Ethernet. PoE Tester Easily tests Ethernet network for power over Ethernet existence Quickly detects the type of the Power Sourcing Equipment (either Endspan or Midspan) Only for detecting Midspan/Endspan. Cable Tester Check the RJ11/RJ12/RJ45 pin to pin cable map Automatically runs all tests and checks for continuity, open, short and crossover wire pairs Cable mapping up to 984 ft Specifications : Max. distance of cable map 300m Compatible connectors RJ45(8 pin) & RJ11(6P/6C/4C/2C) & RJ12 & PoE Cable types tested RJ45 Lan cable Cat 5, 5e, 6(UTP/STP)
RJ11/12 Telephone Cable Cat 3 (6P/2C/4C/6C) Cable map indication 8 LED,Fast/Slow dual speed Shielded indication Yes PoE indication(Master) Midspan/Endspan Live telecommunication
equipment test and router test Yes Dimension (LxWxD) Master:4x2.6x1 in , Remote:4x1.4x1 in Battery type DC 9.0V (not included) Weight 0.3 lbs(Not including battery)

Pro'sKit MT-7051N Multi-Modular Cable Tester

Ships within 4 days

Pro'sKit MT-7051N Multi-Modular Cable Tester

By ProsKit

₹2,477 ~~₹3,177~~

You save ₹700!

22.03% OFF

Special Features:
<>
Tests RJ45 TIA568A/B (AT&T 258A), 10 Base-T, Token ring, RJ-11/ RJ-12 USOC and Coaxial BNC cable.
Automatically check cable for continuity, short, open and crossed wire pairs.
Coaxial cable port indentifies cable conditions including shorts, shield opens and center conductor breaks.
Main unit and remote allow one person testing.

Pro'sKit MT-7603 Fiber Optical Power Meter

Ships within 4 days

Pro'sKit MT-7603 Fiber Optical Power Meter

By ProsKit

₹35,399 ~~₹53,035~~

You save ₹17,636!

33.25% OFF

Proskit MT-7603, Fiber Optical Power Meter Features: Memory capacity of 39 data FC/PC interface 2.5mm FC interface supports connectors, FC-LC hybrid adaptor and SC adaptor are available for option Modulation Detection 2 kHz / 1 kHz / 270 Hz Wavelength measurement calibration As per standard light source output wavelength, adjust accuracy, adjust range ±3dB. New REF User-defined
Can store the current laser source as a new reference value. Extra User Friendly Design Auto power off, low battery indication, Multi unit selection:dBM, mW, uW, nW, Protective rubber boot, soft protective case.

Pro'sKit MT-7602 4 in 1 Fiber Optical Power Meter

Ships within 4 days

Pro'sKit MT-7602 4 in 1 Fiber Optical Power Meter

By ProsKit

₹25,959 ~~₹37,831~~

You save ₹11,872!

31.38% OFF

Pro'sKit MT-7602 is an essential fiber test instrument used for absolute optical power measurement as well as fiber optic visual fault location and cable testing. Easy to use for telecommunication networks & FTTx/FTTH applications. Features Wide range of power measurement - from 850 nm to 1625 nm Power measurements in dBm, mW and μW Support for 2.5 mm universal connectors (for ST/SC/FC) Easy to locate the breakpoint and bad connections in fiber optic cables Tests two types of connectors (RJ-11 and RJ-45) Built-in LED flashlight Auto power off Small and easy to use Technical Specifications Detector type InGaAs Optical connector FC / SC / ST and 2.5 mm Universal Calibrated wavelengths 850 / 1300 / 1310 / 1490 / 1550 / 1625 nm Measurement range +6 ~ -70 dBm Accuracy ± 0.2 dB Power measurement linearity ±2.0% Display resolution ±0.01 dB Power display units dBm / mW / μW Output power ＜1 mW Visual fault locator range 3~5 kM (SM) Connector ST / SC / FC and 2.5 mm Universal Laser safety rating class 2 Wavelength 650 nm (±20 nm) Output modes continuous (CW), 2 Hz pulsed Power supply AA/LR6 1.5 V × 2 pcs. Size 105 × 52 × 34 mm Weight 90 g (w/o battery)

Related Searches

proskit network testing instruments

Pro'sKit MT-7601 Fiber Optical Power Meter

Ships within 4 days

Pro'sKit MT-7601 Fiber Optical Power Meter

By ProsKit

₹12,979 ~~₹19,898~~

You save ₹6,919!

34.77% OFF

Pro'sKit MT-7601 Fiber Optical Power Meter is an essential fiber test instrument used for absolute optical power measurement as well as fiber optic relative loss measurement. Easy to use for telecommunication networks & FTTx/FTTH applications. Features Adapts to FC/SC/ST connectors (LC with optional adaptor). Energy saving: auto power-off after 10 minutes of idle state (can be disabled). Different wavelengths: 850nm/1300nm/1310nm/1490nm/1550nm/1625nm. Comfortable LCD backlight display for operation in the dark. Can store the current laser source as a new reference value. Operation Voice Prompts. Low Battery Warning Additional shock-proof cover & pouch bag. Technical Specifications Detector Type InGaAs Optical Connector FC/SC/ST & 2.5mm Universal Calibrated Wavelengths 850 / 1300 / 1310 / 1490 / 1550 / 1625 nm Measurement Range +6 ~ -70 dBm Accuracy ± 0.2 dB Power Measurement Linearity ±2.0% Display Resolution +6～-60 dBm：0.01 dB , -60～-70 dBm：0.1 dB Power Display Units dBm / mW / μW / nW Reference Comparison Value Yes Modulation Detection 270 Hz / 1 KHz / 2 KHz (850 / 1300 / 1310 / 1490 / 1550 / 1625 nm) Backlight LED Battery Life > 160 hours Operating Temperature -10～+60℃, <90% Storage Temperature -20～+70℃, <90% Power Supply AA/LR6 1.5V × 2 pcs Size 165 × 80 × 35 mm Weight 180g (w/o battery)

Ships within 4 days

Proskit MT-7056 Lan Cable Tester

By ProsKit

₹12,979 ~~₹19,696~~

You save ₹6,717!

34.1% OFF

Special Features:
<>
Scans for continuity, open, short as well as reversal and crossed wiring.
Features with Auto or Manual scans for pin-out indicators.
Built-in tone generator for cable tracing & identification.
The remote terminator can be used to test the existing cable installations.
Patch panel and wall plates can also be easily tested with the RJ45 adapter cable.
RJ45 to BNC adapters allows for testing & tracing of BNC cables.
Battery low indicator prevents misreading rests.

Ships within 4 days

Pro'sKit MT-7057 Cable Sniffer-Remote

By ProsKit

₹8,259 ~~₹12,521~~

You save ₹4,262!

34.04% OFF

Special Features:
<>
Simple one push-button operation.
Power supplied by a 9V battery (Not included).
Palm size design, easy to carry around.
Detects open, short, miswired and cross-connected wire.
Protect itself against damage from line voltage.
Four types of connectors provided to test RJ-45, RJ-11, USB and BNC.

Ships within 4 days

Pro'sKit MT-7025 Network Tone/Probe Kit

By ProsKit

₹10,619 ~~₹16,030~~

You save ₹5,411!

33.76% OFF

Special Features:
Wire tracing, LAN cable mapping, Cable status indication
<>
Locate up to 2KM long wire/cable even in a complex PC network or telephone system
Quickly diagnostic LAN cable condition and identify cable status
Scan for continuity, open, short as well as reversal and crossed wiring
Comes with LED light and earphone support enable to work in dark and noisy environment
All maintenance fields of telecommunication, networking, cable TV and more
Transmitter specifications:
<>
Max. working current - ≦45mA
Tone mode - ONE/TWO-note tone
Compatible connectors - RJ45(8 pin)、RJ11(6P/2C)、Alligator Clips
Max. signal voltage - 8Vp-p
Function selection - 3 Position mode switch
Voltage protection - AC 14V or DC 10V
Receiver specifications:
<>
Max. working current - ≦90mA
Compatible connectors - RJ45(8 pin)/RJ11(6 pin)
Signal status indication - 1 LED & Buzzer
Dimension - 176x42x27mm
Ear jack - 1

Ships within 4 days

Pro'sKit MT-7058 Mini Lan Cable Tester

By ProsKit

₹4,247 ~~₹5,643~~

You save ₹1,396!

24.73% OFF

Special Features:
<>
Complies with CE safety standard
Automatically detect good connections, opens, crossed wires & split pairs
Test RJ45 TIA568A/B (AT&T) 258A), 10 Base-T, Token ring, RJ-11/RJ-12 USOC and coaxial BNC cable
Pin to pin cable map indicator
Non-contact voltage detection for user safety
Traces wires with tone & remote lights allows one person operation
Compact size and lightweight design for easy to carry around
Circuit Protection for both units to ensure the testing quality
Low power consumption with auto power off function to preserve battery
Long cable test more than 300 meters
Function:
<>
Ground or shielded test
1~8 LED pin to pin indicator
No Connection indicator
Crossover indicator
Straight cable indicator
BNC cable indicator
Cable short indicator
Low battery indicator
Non-contact detector(AC60V~240V 60Hz)
Beeper indicator

Ships within 4 days

Pro'sKit MT-8006B Data Diver

By ProsKit

₹15,339 ~~₹23,083~~

You save ₹7,744!

33.55% OFF

Features:
LCD display for dialling number, Caller ID, Clock and other information
Indicator for determining the Line service and speed
High impedance monitor for data safe operation without disrupting existing traffic.
Smart power saving enables battery life up to 6 months
16 dialling number memories
Tone (DTMF) and pse operation
Up to 32 digits phone number memory for speed dialling key
Pre-dialling and last number redial function
PBX pause key, insert a PBX pause in stored numbers
Telephone line polarity indicators
Low battery indication
Backlight function
RJ-11 port for easy test leads change
Ringer and voltage LED indication
Angled bed of nails and RJ-11 plug

Ships within 4 days

Pro'sKit MT-8100 Butt Set

By ProsKit

₹23,599 ~~₹37,190~~

You save ₹13,591!

36.54% OFF

Description:
Pro’sKit MT-8100 Butt Set comes with all the functions you need to be more productive in the field, It was approved by IEC/EN 60529 IP54 for waterproof and dustproof test, and features the latest improvements to drop protection reliability.
MT-8100 is a smart operation unit used by installer, repair technicians and other authorized personnel to test copper wire voice subscriber lines. It is easy to use, features Line voltage test, continuity test, two-way hands-free amplified speakerphone, speed dialling, low battery indicator and a rugged locking belt clip
Features:
Monitor amplifier- 9V transistor; provides 25 hours continuous use, typical
Relative humidity- 5 To 95%
Complied with IP54 Dustproof & Waterproof tests
Drop Protection
CE approved
High impedance monitor
Outer-lead voltage LED indicators
On/off checking feature checks out if telecom line is connected well.
Continuous polarity LED indicators.
Speakerphone for convenient hands-free two-way conversation
Tone and pse operation
Store up to twelve 16-digit numbers in repeat dialler (speed dialling), plus extra number store in M1 button.
Last number redial feature.
PBX pause button.
Mute switch
Electronic switch controls the volume of the speakerphone/monitor.
Automatic shut-off feature turns off speaker after five minutes of inactivity
Battery low-voltage LED indictors
Audible electronic ringer
Relocatable steel locking belt clip
Angled Bed of Nails allows it stab into the cable, and the auxiliary RJ-11Modular plug can be inserted directly into telecom jack.

Pro'sKit MT-7068 All-In-One Toner & Probe Kit

Ships within 4 days

Pro'sKit MT-7068 All-In-One Toner & Probe Kit

By ProsKit

₹21,239 ~~₹26,930~~

You save ₹5,691!

21.13% OFF

<>
Transmitter Specifications
Tone mode - ONE/TWO-note tone
Compatible connectors - RJ-45/RJ-11/USB/F/BNC/
RCA/Alligator Clips
Battery voltage - 6V into 600Ω
Low battery display - 6.5V
Function selection - 5-position rotary switch
Receiver Specifications-
<>
Ear jack - 1
Dimension - 250x52x33mm
Cable map indication - 8 LED indicators
Individual packing - Color box
Special Features
<>
Detects telephone and Ethernet service, indicates polarity and active line numbers on voice circuits, and active pair number on Ethernet circuits.
Ideal for all maintenance fields of telecommunication, networking, datacom, Audio/Video, Cable TV and all weather cabling, etc.
Overcome noise and save time & Locates cables quickly and easily.
Verify conductor continuity with cable map
Toner detects telephone and Ethernet service, indicates polarity and active line numbers on voice circuits, and indicates active pair number on Ethernet circuits.

Ships within 4 days

Pro'sKit 3PK-NT023N Tone And Probe Kit

By ProsKit

₹11,091 ~~₹17,487~~

You save ₹6,396!

36.58% OFF

Special Features:
<>
Open/short wiring test
Connected wires display
No wire or termination indication
Wrong connection / Non-parallel connection
Ethernet 10 base2 termination value detection
Battery low indication
Buzzer inside
BNC for testing 10 BASE2 terminator value
Isolation resistances 50 K ohms test

Pro'sKit MT-7059 LCD Multifunction Cable Tester

Ships within 4 days

Pro'sKit MT-7059 LCD Multifunction Cable Tester

By ProsKit

₹14,159 ~~₹20,518~~

You save ₹6,359!

30.99% OFF

Description:
<>
LCD display, Wire tracing, LAN cable mapping, 9 different tone cable status indication
Special Features:
<>
The wire can be tracked directly in connection with Ethernet service, router, and PC terminal
Validate and troubleshoot wiring on RJ11/RJ45 cables, Coaxial cable, USB cable, IEEE 1394 cable
Test cable status for continuity, shorts, opens,miswired, crossover
9 different tones selection for convenience use under different environment condition
All installation and maintenance fields of telecommunication, networking, cable TV and more
Transmitter specifications:
<>
Max. distance of transmission - 2km
Max. distance of cable map - 300m
Max. working current - ≦70mA
Tone mode - 9 Tone adjustable
Compatible connectors - RJ45(8 pin)、RJ11(6 pin)、BNC、
USB、IEEE 1394
Max. signal voltage - 1.5Vp-p
Function selection - 3 Push button & 1 Power switch
Function and fats LCD display - LCD display, (Wiremap；Tone；Short；Noadapter； UTP；STP
Cable map indication - LCD (#1~#8)
Shielded indication - LCD (#9)
Receiver specifications:
<>
Max. working current - ≦70mA
Ear jack - 1
LED illumination - 2 LEDs
Dimension - 218X46X29mm
Remote unit specifications:
<>
Compatible connectors - RJ-45(8 pin)、RJ-11(6 pin)、BNC、USB、IEEE 1394
Dimension - 107X30X24mm

Ships within 4 days

Pro'sKit Lan Cable Tester 3PK-NT015N

By ProsKit

₹12,979 ~~₹20,950~~

You save ₹7,971!

38.05% OFF

Features
Open/short wiring test
Connected wires display
No wire or termination indication
Wrong connection / Non-parallel connection
Ethernet 10 base2 termination value detection
Battery low indication
Buzzer inside
BNC for testing 10 BASE2 terminator value
Isolation resistances 50 K ohms test

Ships within 4 days

ProsKit Fiber Tester 9 Volt 1300 nm Peak Wavelength

By ProsKit

₹50,739 - ₹50,739

You save ₹30,693!

37.69% OFF

ProsKit Fiber Tester 9 Volt 1300 nm Peak Wavelength is a high-performance tool from the trusted ProsKit brand. It is features rugged construction and durable components, making it a valuable addition to any toolbox or workstation. This model meets the demands of modern electronic repair, maintenance, and assembly tasks.
With the ProsKit Fiber Tester 9 Volt 1300 nm Peak Wavelength, professionals can achieve unmatched results in every application. Whether in the field or a controlled lab environment, this tool enhances productivity and safety while ensuring ease of use. Invest in the ProsKit Fiber Tester 9 Volt 1300 nm Peak Wavelength to experience durability and engineering that stands out.

Peak Wavelength : 1300 nm

Type of Product : Fiber Tester

Fiber core : 62.5/125u

Power : 9 Volt

Application : Fiber testing

Pro'sKit MT-7801 Fiber Optical Light Source

Ships within 4 days

Pro'sKit MT-7801 Fiber Optical Light Source

By ProsKit

₹22,419 ~~₹35,735~~

You save ₹13,316!

37.26% OFF

Proskit MT7801,Fiber Optical Light Source
Features: Stability and Reliability Output Built-in optic isolator, larger and more stable compared to desktop source. Full Range Supply MT-7801 provides single mode 1310/1550 wavelength light source MT-7802 provides multi mode 850/1300 wavelength light source MT-7803 provides single mode 1310/1490/1550 wavelength light source Supports SC/PC Supports SC/PC connectors LCD display with Backlight Easily reading and allowing work in dark area. WAVE ID In WaveID mode, it will encode each wavelength with a unique WaveID code; output the same wavelength automatically to identify the wavelength. (Work with Pro’sKit MT-7601& MT-7603 power meter) Selection of 3 Modulations, distinguish OPTIC fiber line 270Hz, 1KHz, 2KHz Easy Operation Designed with single key to switch the wavelength, easy, flexible and convenient. User friendly Power by Battery, more convenient. Comes with DC5V power jack allows charging the rechargeable b attery with. DC input (adaptor is not included) when using the rechargeable battery. Auto power off. Protective rubber boot with a soft protective case. DC 5V Power jack Specification: Model no. MT-7801 MT-7802 MT-7803 Wavelength 1310/1550nm±10nm 850/1300nm±10nm 1310/1490/1550nm±10nm Power Stability ±0.05dB / 1hr???±0.1dB / 8hrs output Power >-5dBm >-10dBm >-5dBm OPTIC connector SC/PC Modulation 270Hz, 1kHz,2kHz Auto power off 10 minutes (could be reset) Battery Charge Yes (when using rechargeable battery), by DC 5V power jack Low battery indication Yes Storage temperature -20~+70°C; <90%RH Operating temperature -10~+60°C; <90%RH Power source 2 x 1.5V AA batteries (not included) Dimension 165× 80 × 35mm Weight 280g package Color box

Pro'sKit MT-7071 LCD Cable Length Toner & Probe Kit

Ships within 4 days

Pro'sKit MT-7071 LCD Cable Length Toner & Probe Kit

By ProsKit

₹30,679 ~~₹44,301~~

You save ₹13,622!

30.75% OFF

Proskit MT-7071, LCD Cable Length Toner & Probe Kit MT-7071 Toner specifications: Cable types tested- RJ45 Lan cable Cat 5、5e、6、(UTP/STP)、 RJ11/12 Telephone cable Cat 3 (2/4/6 pin)、Coaxial cable & normal solid/Stranded wire by alligator clips patch cord. Cable test modes- 2 note tones for location, wire mapping , open length tested Measurement technology- Cable capacitance method Max. distance to open for test- 1,200 m (4,000 ft/1,300 yd), approx Min. distance to open for test- 2 meter (6.8 ft/ 2.2 yd) Typical accuracy of length test- 2~10 m (6.8~33 ft/2.2~11yd) for reference 10~610 m (33-2000 ft/ 11-666 yd.): ±5.0% 610~1,200 m (2000~4000ft/666~1300 yd.) for reference, Default measuring Cat.5e cable. Calibration accuracy of length test- 10~610 m (33~2,000 ft/11~666 yd) ±3.0%, standard cable:10~50m(33~164 ft/11~55 yd), Default measuring Cat.5e cable. Resolution & unit of length test- 0.1 m / ft / yd, Rate:1~3 sec./time Calibrating parameters memory- 1~7 sets, allowing rewrite by new calibrating parameters. Max. distance of transmit- ≧3 km (580/1160 Hz) & 610 m (2,000 ft/666 yd) Min. distance of cable map- Twisted pair:1m (3 ft/1yd), normal wire:1.25m (4ft/1.35yd) Cable map & shielded indication- LCD 1~8 & G Battery type- DC 9V(NEDA 1604/6F22)X1pc(Not included) Dimension (L×W×D)- 138×80×35 mm MT-7071 Receiver specification: Signal status indication- 580/1160 Hz NCV indication & LED illumination- 1 LED (AC90~1000V) & 1 LED Dimension (L×W×D)- 203×50×32 mm MT-7071 Remote unit specifications: Remote unit- 1 pc, max. support to 8 pcs Compatible connectors- RJ45(8 pin), RJ11/12(6 pin), BNC connectors Remote unit dimension(LxWxD)- 90×32×30mm Individual packing- Color box

Page 1 of 1 results