Filter

Clear all
Brand
RS PRO
Categories
Price Range
Min Price:
Max Price:
-
Discount
Brands
Country of Origin
Express Shipping

RS PRO Cleaning

Showing 40 out of 122 products

Sort by
Related Searches
rs pro dustbins and waste bins black
rs pro black dustbins and waste bins
rs pro dustbins and waste bins
rs pro dustbins and waste bins black
rs pro dustbins and waste bins black
₹730  
RS PRO Natural Bristle PCB and Flux Brush Model No 2299690 is a fundamental component used in modern electronic devices to mechanically support and electrically connect various electronic components. It acts as a platform for creating complex circuits, enabling efficient and compact designs. PCBs are widely used in devices like smartphones, computers, automotive electronics, medical equipment, and many others.
The construction of a PCB involves a thin, flat board made of an insulating material, typically fiberglass-reinforced epoxy resin, with a thin layer of conductive copper foil laminated on one or both sides. Copper traces are etched onto the board to create electrical pathways between components. These traces form the circuits that allow current to flow between the various components, facilitating communication and control within the device.
PCBs come in different types, such as single-layer, double-layer (also known as double-sided), and multilayer boards. Multilayer PCBs contain multiple layers of copper traces separated by insulating layers. This allows for increased circuit complexity and better signal integrity.
The manufacturing process involves designing the circuit layout using specialized software, followed by transferring the design to the PCB through a process called "etching." After etching, holes are drilled to accommodate electronic components' leads or pins. These components are then soldered onto the board, completing the assembly process.
Flux Brush:
A flux brush, also known as a soldering flux brush or a solder flux applicator, is a small tool used in soldering and electronics assembly processes. It plays a crucial role in ensuring a reliable and strong solder joint between electronic components and the PCB.
Flux is a chemical substance applied to metal surfaces before soldering to clean and remove any oxidation or contaminants that might inhibit the proper bonding of solder. It also helps the solder flow more smoothly and improves the wetting action between the solder and the metal surface.
A flux brush is typically made of bristles, often from natural materials like horsehair or synthetic materials, which are mounted on a handle. The bristles hold and distribute the flux evenly on the soldering areas. The handle is usually made of plastic or wood, providing a comfortable grip for the user.
To use a flux brush, the soldering technician dips the bristles into the flux and then applies it to the areas of the PCB that require soldering. Flux brushes are especially handy when working with surface mount components or intricate PCB designs.
₹67,259  
RS PRO Shadow Boards Kit, Red Model No 2013135 (Each of 1 Kit) is a set of tools and materials that are used to create shadow boards. Shadow boards are a type of visual management tool that is used to track and organize tools, supplies, and equipment. They are often used in industrial and manufacturing settings, but they can also be used in other settings, such as warehouses, retail stores, and schools.
Shadow boards kits typically include the following items:
A board or panel that is the same size as the shadow board that you want to create.
A variety of adhesive magnets.
A set of templates or stencils that you can use to create the shadows of the tools, supplies, and equipment that you want to track.
A marker or pen that you can use to write the names of the tools, supplies, and equipment on the shadow board.
To create a shadow board, you simply attach the magnets to the board or panel, and then place the templates or stencils over the magnets. Once you have created the shadows, you can write the names of the tools, supplies, and equipment on the shadow board.
Shadow boards are a versatile and effective way to track and organize tools, supplies, and equipment. They are easy to use and maintain, and they can be customized to meet the specific needs of your workplace.
Here are some of the benefits of using shadow boards:
They help to keep tools and supplies organized and easy to find.
They can help to prevent accidents by making it clear where tools and supplies should be stored.
They can help to improve efficiency by reducing the time it takes to find tools and supplies.
They can help to reduce waste by ensuring that tools and supplies are used and returned to their proper place.
Overall, shadow boards are a valuable tool that can help to improve the organization, safety, and efficiency of your workplace.
Here are some tips for using shadow boards:
Use a shadow board for each type of tool or supply.
Label the shadow board clearly so that everyone knows what is stored there.
Keep the shadow board clean and organized.
Rotate the tools and supplies on the shadow board regularly to ensure that they are all being used.
₹63,719  
RS PRO Shadow Boards Kit, Red Model No 2013133 (Each of 1 Kit) is a set of tools and materials that are used to create shadow boards. Shadow boards are a type of visual management tool that is used to track and organize tools, supplies, and equipment. They are often used in industrial and manufacturing settings, but they can also be used in other settings, such as warehouses, retail stores, and schools.
Shadow boards kits typically include the following items:
A board or panel that is the same size as the shadow board that you want to create.
A variety of adhesive magnets.
A set of templates or stencils that you can use to create the shadows of the tools, supplies, and equipment that you want to track.
A marker or pen that you can use to write the names of the tools, supplies, and equipment on the shadow board.
To create a shadow board, you simply attach the magnets to the board or panel, and then place the templates or stencils over the magnets. Once you have created the shadows, you can write the names of the tools, supplies, and equipment on the shadow board.
Shadow boards are a versatile and effective way to track and organize tools, supplies, and equipment. They are easy to use and maintain, and they can be customized to meet the specific needs of your workplace.
Here are some of the benefits of using shadow boards:
They help to keep tools and supplies organized and easy to find.
They can help to prevent accidents by making it clear where tools and supplies should be stored.
They can help to improve efficiency by reducing the time it takes to find tools and supplies.
They can help to reduce waste by ensuring that tools and supplies are used and returned to their proper place.
Overall, shadow boards are a valuable tool that can help to improve the organization, safety, and efficiency of your workplace.
Here are some tips for using shadow boards:
Use a shadow board for each type of tool or supply.
Label the shadow board clearly so that everyone knows what is stored there.
Keep the shadow board clean and organized.
Rotate the tools and supplies on the shadow board regularly to ensure that they are all being used.
₹64,899  
RS PRO Shadow Boards Kit, Blue Model No 2013134 (Each of 1 Kit) is a set of tools and materials that are used to create shadow boards. Shadow boards are a type of visual management tool that is used to track and organize tools, supplies, and equipment. They are often used in industrial and manufacturing settings, but they can also be used in other settings, such as warehouses, retail stores, and schools.
Shadow boards kits typically include the following items:
A board or panel that is the same size as the shadow board that you want to create.
A variety of adhesive magnets.
A set of templates or stencils that you can use to create the shadows of the tools, supplies, and equipment that you want to track.
A marker or pen that you can use to write the names of the tools, supplies, and equipment on the shadow board.
To create a shadow board, you simply attach the magnets to the board or panel, and then place the templates or stencils over the magnets. Once you have created the shadows, you can write the names of the tools, supplies, and equipment on the shadow board.
Shadow boards are a versatile and effective way to track and organize tools, supplies, and equipment. They are easy to use and maintain, and they can be customized to meet the specific needs of your workplace.
Here are some of the benefits of using shadow boards:
They help to keep tools and supplies organized and easy to find.
They can help to prevent accidents by making it clear where tools and supplies should be stored.
They can help to improve efficiency by reducing the time it takes to find tools and supplies.
They can help to reduce waste by ensuring that tools and supplies are used and returned to their proper place.
Overall, shadow boards are a valuable tool that can help to improve the organization, safety, and efficiency of your workplace.
Here are some tips for using shadow boards:
Use a shadow board for each type of tool or supply.
Label the shadow board clearly so that everyone knows what is stored there.
Keep the shadow board clean and organized.
Rotate the tools and supplies on the shadow board regularly to ensure that they are all being used.
₹2,831  
RS PRO Medium Bristle White Toilet Brush, Nylon bristle material Model No 8988292 is a specialized cleaning tool designed specifically for cleaning and maintaining the cleanliness of toilets. It is an essential household cleaning item found in bathrooms worldwide. The toilet brush consists of a long handle and a bristle brush head, specially designed to reach and clean the curved and hard-to-reach surfaces of the toilet bowl.
Key features and uses of a toilet brush:
Handle: The handle of a toilet brush is long enough to provide adequate reach inside the toilet bowl without the user having to bend or touch the toilet water. It is often made of durable and water-resistant materials like plastic or metal.
Bristle Brush Head: The brush head of a toilet brush features stiff and resilient bristles made of materials like nylon or polypropylene. The bristles are designed to effectively scrub and remove stains, residue, and bacteria from the toilet bowl.
Cleaning Action: The toilet brush is used by applying cleaning agents or toilet bowl cleaner to the inside of the toilet bowl and then using the brush to scrub the surfaces. The bristles agitate and remove stains and deposits, allowing the cleaning agent to work effectively.
Hygienic Design: Toilet brushes are designed with hygiene in mind. The bristle brush head is specifically shaped to match the contours of the toilet bowl, ensuring efficient cleaning. Additionally, many toilet brushes come with a holder or stand that keeps the brush off the floor, preventing contact with other surfaces and promoting better hygiene.
Disposable or Replaceable Brush Heads: Some toilet brushes come with disposable or replaceable brush heads. This feature allows users to maintain better hygiene by replacing the brush head regularly.
Applications of a toilet brush:
The primary application of a toilet brush is to clean and maintain the cleanliness of toilets. It is used to remove stubborn stains, mineral deposits, and bacteria from the inside of the toilet bowl. Regular use of a toilet brush helps to prevent the buildup of unsightly stains and ensures a more hygienic bathroom environment.
Toilet brushes are essential cleaning tools in households, hotels, restaurants, offices, and other public facilities. They play a crucial role in ensuring proper sanitation and promoting good bathroom hygiene. Proper use and maintenance of a toilet brush contribute to the overall cleanliness and comfort of bathrooms, making it an indispensable tool in every household and commercial setting.
₹4,247  
RS PRO Invertible Air Duster, 200 ml Model No 1681646 is a specialized cleaning tool used to remove dust, dirt, and debris from hard-to-reach areas and delicate equipment. It functions similarly to a traditional compressed air duster, but with the added advantage of being able to work in an upside-down position, allowing for more versatile and efficient cleaning.
The main features and components of an invertible air duster include:
Aerosol Can: The invertible air duster typically comes in an aerosol can, similar to traditional compressed air dusters. The can is pressurized and contains a liquefied gas propellant that, when released, expels the air in a high-pressure burst.
Nozzle: The aerosol can is equipped with a nozzle that directs the airflow. The nozzle is designed to be flexible and adjustable, allowing users to target specific areas and access tight spaces.
Invertible Function: The unique feature of the invertible air duster is its ability to function in an upside-down position. Traditional compressed air dusters may lose pressure or stop working when tilted upside down, but the invertible air duster can be used effectively at any angle, including upside down.
The invertible air duster offers several advantages over traditional compressed air dusters:
Versatility: The ability to function in an inverted position allows users to clean underneath and between objects, inside crevices, and in other hard-to-reach areas that are challenging to access with conventional dusters.
Improved Cleaning Performance: The high-pressure burst of air effectively dislodges and removes dust, dirt, and debris from delicate electronics, keyboards, computer components, cameras, and other sensitive equipment.
Reduced Waste: Invertible air dusters tend to have more precise airflow control, resulting in less wastage of the propellant and increased overall efficiency.
It is important to note that, like traditional compressed air dusters, invertible air dusters should be used with caution. The high-pressure air can cause particles to become airborne, and users should be careful not to blow dust into their eyes or inhale it. Additionally, users should avoid using the air duster on delicate components at extremely close range, as the force of the air can potentially cause damage.
In conclusion, an invertible air duster is a versatile and efficient cleaning tool used to remove dust and debris from hard-to-reach areas and delicate equipment. Its ability to work in an inverted position allows for more precise and thorough cleaning, making it a valuable accessory for electronics maintenance, computer cleaning, and various other applications. However, proper usage and safety precautions should be followed to avoid potential hazards and equipment damage.
₹2,94,999  
RS PRO NE8 Non Electric Water Softener, 508 x 500 x 293mm Model No 1952193 is a water treatment system designed to reduce the hardness of water without the need for electricity. Hard water contains high levels of minerals like calcium and magnesium, which can lead to limescale buildup in pipes, appliances, and fixtures, reducing their efficiency and lifespan. A non-electric water softener uses a different method to remove or neutralize these minerals, improving water quality and reducing the negative effects of hard water.
One common type of non-electric water softener is the salt-free water softener. This system uses a process called template-assisted crystallization (TAC) or nucleation-assisted crystallization. Instead of removing minerals from the water, it changes the structure of the minerals so that they do not form limescale deposits.
In a salt-free water softener, the water flows through a catalytic media bed, typically made of a special resin or ceramic material. The media acts as a template for the calcium and magnesium minerals to form crystals. These crystals remain in suspension in the water, preventing them from attaching to surfaces and forming limescale.
Salt-free water softeners have several benefits:
No Electricity Required: As the name suggests, non-electric water softeners do not need electricity to function, resulting in lower operating costs and simpler maintenance.
Environmentally Friendly: Salt-free water softeners do not use chemicals or produce brine discharge, making them environmentally friendly compared to traditional salt-based water softeners.
Preserves Beneficial Minerals: Unlike salt-based water softeners that remove minerals from water, salt-free systems retain beneficial minerals like calcium and magnesium, which are essential for health.
Low Maintenance: Non-electric water softeners have minimal moving parts and require less maintenance than electric systems.
However, it's important to note that salt-free water softeners are not as effective as salt-based systems in completely removing hardness minerals from water. They do not actually "soften" the water in the traditional sense, but rather prevent the minerals from causing scale buildup. Therefore, their performance may vary depending on the initial hardness level of the water and the specific system used.
In summary, a non-electric water softener, such as a salt-free water softener, is an alternative solution to traditional salt-based water softeners. It uses template-assisted crystallization to prevent limescale buildup in pipes and appliances without removing hardness minerals from the water. It offers environmental benefits, lower maintenance requirements, and retains beneficial minerals while addressing the negative effects of hard water.
₹1,41,599  
RS PRO Metered Mini Electric Water Softener, 600 x 330 x 470mm Model No 8977138 is a type of water treatment system designed to remove or reduce the hardness of water caused by dissolved minerals, primarily calcium and magnesium ions. Hard water can lead to several issues, such as limescale buildup in pipes and appliances, reduced soap and detergent effectiveness, and decreased efficiency of water heaters. Electric water softeners use electricity to operate and regenerate the softening media to ensure continuous water softening.
The primary component of an electric water softener is the resin tank filled with ion exchange resin beads. When hard water passes through the resin bed, the calcium and magnesium ions in the water are exchanged with sodium ions from the resin beads. As a result, the water leaving the softener is softened, as the calcium and magnesium ions are replaced with sodium ions, which do not cause scaling or other hardness-related problems.
The electric water softener system has two essential phases in its operation:
Softening Phase: During the softening phase, hard water enters the resin tank and passes through the ion exchange resin. The resin beads capture the calcium and magnesium ions, and sodium ions are released into the water, resulting in softened water.
Regeneration Phase: Over time, the resin bed becomes saturated with calcium and magnesium ions, necessitating regeneration to restore its softening capacity. During the regeneration phase, the electric water softener uses a brine solution (sodium chloride or saltwater) to wash over the resin bed, displacing the accumulated calcium and magnesium ions. The brine solution containing the removed ions is then flushed out of the system, leaving the resin bed ready to continue the softening process.
The electric water softener is equipped with a control valve and a timer or electronic control panel to manage the softening and regeneration cycles. Some advanced models use water hardness sensors or volume-based regeneration to optimize water and salt consumption.
Electric water softeners offer various benefits, including:
Limescale Prevention: By removing hardness minerals, the softener prevents limescale buildup in pipes, appliances, and water fixtures.
Improved Cleaning: Softened water improves the effectiveness of soaps and detergents, leading to better cleaning results and reduced detergent consumption.
Extended Appliance Lifespan: Soft water reduces the wear and tear on appliances like water heaters, dishwashers, and washing machines, potentially extending their lifespan.
Energy Efficiency: Softened water allows water heaters and other appliances to operate more efficiently, saving energy and reducing utility costs.
Electric water softeners are an effective solution for combating the negative effects of hard water, providing households and businesses with softened water for improved efficiency, appliance longevity, and overall water quality.
₹2,12,399  
RS PRO Metered Midi Electric Water Softener, 900 x 330 x 470mm Model No 1952189 is a type of water treatment system designed to remove or reduce the hardness of water caused by dissolved minerals, primarily calcium and magnesium ions. Hard water can lead to several issues, such as limescale buildup in pipes and appliances, reduced soap and detergent effectiveness, and decreased efficiency of water heaters. Electric water softeners use electricity to operate and regenerate the softening media to ensure continuous water softening.
The primary component of an electric water softener is the resin tank filled with ion exchange resin beads. When hard water passes through the resin bed, the calcium and magnesium ions in the water are exchanged with sodium ions from the resin beads. As a result, the water leaving the softener is softened, as the calcium and magnesium ions are replaced with sodium ions, which do not cause scaling or other hardness-related problems.
The electric water softener system has two essential phases in its operation:
Softening Phase: During the softening phase, hard water enters the resin tank and passes through the ion exchange resin. The resin beads capture the calcium and magnesium ions, and sodium ions are released into the water, resulting in softened water.
Regeneration Phase: Over time, the resin bed becomes saturated with calcium and magnesium ions, necessitating regeneration to restore its softening capacity. During the regeneration phase, the electric water softener uses a brine solution (sodium chloride or saltwater) to wash over the resin bed, displacing the accumulated calcium and magnesium ions. The brine solution containing the removed ions is then flushed out of the system, leaving the resin bed ready to continue the softening process.
The electric water softener is equipped with a control valve and a timer or electronic control panel to manage the softening and regeneration cycles. Some advanced models use water hardness sensors or volume-based regeneration to optimize water and salt consumption.
Electric water softeners offer various benefits, including:
Limescale Prevention: By removing hardness minerals, the softener prevents limescale buildup in pipes, appliances, and water fixtures.
Improved Cleaning: Softened water improves the effectiveness of soaps and detergents, leading to better cleaning results and reduced detergent consumption.
Extended Appliance Lifespan: Soft water reduces the wear and tear on appliances like water heaters, dishwashers, and washing machines, potentially extending their lifespan.
Energy Efficiency: Softened water allows water heaters and other appliances to operate more efficiently, saving energy and reducing utility costs.
Electric water softeners are an effective solution for combating the negative effects of hard water, providing households and businesses with softened water for improved efficiency, appliance longevity, and overall water quality.
₹2,47,799  
RS PRO Metered Maxi Electric Water Softener, 1100 x 330 x 470mm Model No 1952191 is a type of water treatment system designed to remove or reduce the hardness of water caused by dissolved minerals, primarily calcium and magnesium ions. Hard water can lead to several issues, such as limescale buildup in pipes and appliances, reduced soap and detergent effectiveness, and decreased efficiency of water heaters. Electric water softeners use electricity to operate and regenerate the softening media to ensure continuous water softening.
The primary component of an electric water softener is the resin tank filled with ion exchange resin beads. When hard water passes through the resin bed, the calcium and magnesium ions in the water are exchanged with sodium ions from the resin beads. As a result, the water leaving the softener is softened, as the calcium and magnesium ions are replaced with sodium ions, which do not cause scaling or other hardness-related problems.
The electric water softener system has two essential phases in its operation:
Softening Phase: During the softening phase, hard water enters the resin tank and passes through the ion exchange resin. The resin beads capture the calcium and magnesium ions, and sodium ions are released into the water, resulting in softened water.
Regeneration Phase: Over time, the resin bed becomes saturated with calcium and magnesium ions, necessitating regeneration to restore its softening capacity. During the regeneration phase, the electric water softener uses a brine solution (sodium chloride or saltwater) to wash over the resin bed, displacing the accumulated calcium and magnesium ions. The brine solution containing the removed ions is then flushed out of the system, leaving the resin bed ready to continue the softening process.
The electric water softener is equipped with a control valve and a timer or electronic control panel to manage the softening and regeneration cycles. Some advanced models use water hardness sensors or volume-based regeneration to optimize water and salt consumption.
Electric water softeners offer various benefits, including:
Limescale Prevention: By removing hardness minerals, the softener prevents limescale buildup in pipes, appliances, and water fixtures.
Improved Cleaning: Softened water improves the effectiveness of soaps and detergents, leading to better cleaning results and reduced detergent consumption.
Extended Appliance Lifespan: Soft water reduces the wear and tear on appliances like water heaters, dishwashers, and washing machines, potentially extending their lifespan.
Energy Efficiency: Softened water allows water heaters and other appliances to operate more efficiently, saving energy and reducing utility costs.
Electric water softeners are an effective solution for combating the negative effects of hard water, providing households and businesses with softened water for improved efficiency, appliance longevity, and overall water quality.
₹1,651  
RS PRO Polish Cleaner 400 ml Aerosol Model No 1368541 is a specialized cleaning product used to clean, polish, and restore the appearance of various surfaces, such as furniture, metal, glass, plastics, and automotive finishes. Polish cleaners typically contain a combination of cleaning agents, abrasives, and protectants to remove dirt, grime, stains, and minor scratches while leaving a smooth and shiny finish.
Key features and functions of a polish cleaner are as follows:
Cleaning Action: Polish cleaners are designed to effectively clean and remove dirt, dust, and stains from the surface, restoring its original luster and shine.
Polishing Effect: The polish cleaner contains fine abrasives that help to remove minor scratches, swirl marks, and oxidation, resulting in a smooth and polished surface.
Protective Coating: Many polish cleaners leave behind a thin protective layer or wax coating that helps to repel dust, water, and other contaminants, keeping the surface cleaner for longer periods.
Versatility: Polish cleaners are formulated to work on various surfaces, making them suitable for use on furniture, metal, plastic, glass, ceramics, and automotive surfaces.
Easy Application: Polish cleaners are usually available in spray or liquid form for easy application. They can be applied with a cloth, sponge, or applicator pad.
Reviving Surfaces: Polish cleaners are particularly useful for rejuvenating dull or faded surfaces, bringing back the shine and restoring the appearance of worn-out materials.
Non-Damaging: High-quality polish cleaners are designed to be non-abrasive and safe for use on delicate surfaces, such as clear-coated automotive finishes, without causing damage.
Common applications of polish cleaners include polishing and cleaning wooden furniture, restoring shine to metal surfaces, removing stains and scratches from glass and plastic, and enhancing the appearance of automotive paint finishes.
₹30,679  
RS PRO One Click Cleaner Pen for LC Connector, MU Connector Model No 1214196 is a specialized cleaning tool used in fiber optic networks to clean and maintain optical connectors and ports. It is a compact and easy-to-use device that simplifies the process of cleaning fiber optic connectors, ensuring optimal performance and reliability of the network.
Key features and functions of a One-Click Cleaner Pen are as follows:
Compact Design: The One-Click Cleaner Pen is designed as a pen-like tool, making it portable and convenient to carry in the field or for on-site maintenance.
One-Click Operation: The name "One-Click" refers to the simple and user-friendly operation of the cleaner. With just one click of a button, the cleaning process is initiated.
Cleaning Tip: The cleaner pen has a specially designed cleaning tip at the end, typically made of lint-free material and impregnated with cleaning agents. The tip is precise enough to fit into the connector endface for thorough cleaning.
Dry Cleaning: One-Click Cleaner Pens usually employ a dry cleaning method, meaning they do not require any additional cleaning agents or fluids. The cleaning tip effectively removes dust, dirt, oil, and other contaminants without leaving residue.
Connector Types: One-Click Cleaner Pens are available in various versions, each tailored to clean specific connector types, such as SC, LC, FC, ST, and others.
Reusable: Many One-Click Cleaner Pens are designed to be reusable, with the cleaning tip capable of performing hundreds of cleaning cycles before needing replacement.
Efficient Cleaning: The One-Click Cleaner Pen's design ensures consistent cleaning performance, helping maintain low optical loss and preventing signal degradation in fiber optic connections.
One-Click Cleaner Pens are indispensable tools for fiber optic technicians, network installers, and maintenance personnel. Keeping optical connectors clean is crucial for reliable and efficient data transmission in fiber optic networks. Contaminated connectors can lead to increased signal loss, connection failures, and network downtime. The use of One-Click Cleaner Pens helps minimize these issues, prolong the life of fiber optic connectors, and ensure the integrity of the entire network.
Regularly cleaning fiber optic connectors with a One-Click Cleaner Pen is a standard practice in fiber optic network maintenance, contributing to the overall performance, stability, and longevity of the network infrastructure.
₹40,119  
RS PRO One Click Cleaner Pen for FC Connector, SC Connector, ST Connector Model No 1214195 is a specialized cleaning tool used in fiber optic networks to clean and maintain optical connectors and ports. It is a compact and easy-to-use device that simplifies the process of cleaning fiber optic connectors, ensuring optimal performance and reliability of the network.
Key features and functions of a One-Click Cleaner Pen are as follows:
Compact Design: The One-Click Cleaner Pen is designed as a pen-like tool, making it portable and convenient to carry in the field or for on-site maintenance.
One-Click Operation: The name "One-Click" refers to the simple and user-friendly operation of the cleaner. With just one click of a button, the cleaning process is initiated.
Cleaning Tip: The cleaner pen has a specially designed cleaning tip at the end, typically made of lint-free material and impregnated with cleaning agents. The tip is precise enough to fit into the connector endface for thorough cleaning.
Dry Cleaning: One-Click Cleaner Pens usually employ a dry cleaning method, meaning they do not require any additional cleaning agents or fluids. The cleaning tip effectively removes dust, dirt, oil, and other contaminants without leaving residue.
Connector Types: One-Click Cleaner Pens are available in various versions, each tailored to clean specific connector types, such as SC, LC, FC, ST, and others.
Reusable: Many One-Click Cleaner Pens are designed to be reusable, with the cleaning tip capable of performing hundreds of cleaning cycles before needing replacement.
Efficient Cleaning: The One-Click Cleaner Pen's design ensures consistent cleaning performance, helping maintain low optical loss and preventing signal degradation in fiber optic connections.
One-Click Cleaner Pens are indispensable tools for fiber optic technicians, network installers, and maintenance personnel. Keeping optical connectors clean is crucial for reliable and efficient data transmission in fiber optic networks. Contaminated connectors can lead to increased signal loss, connection failures, and network downtime. The use of One-Click Cleaner Pens helps minimize these issues, prolong the life of fiber optic connectors, and ensure the integrity of the entire network.
Regularly cleaning fiber optic connectors with a One-Click Cleaner Pen is a standard practice in fiber optic network maintenance, contributing to the overall performance, stability, and longevity of the network infrastructure.
₹2,204  
RS PRO 49x38 cm Yellow Cloth for Heavy Duty Wiping 1763657 are durable and highly absorbent cleaning accessories designed to tackle tough cleaning tasks in industrial, commercial, and professional settings. Engineered with superior materials and advanced construction, these cloths offer exceptional cleaning performance, strength, and versatility for a wide range of applications. Constructed from high-quality and robust materials, such as strong fibers or reinforced fabrics, the RS PRO Cloths for Heavy Duty Wiping are built to withstand the rigors of demanding cleaning tasks. Their sturdy design ensures resistance to tearing, fraying, and degradation, even when used on rough or abrasive surfaces. The cloths' design is thoughtfully crafted to maximize cleaning efficiency and effectiveness. Their high absorbency allows them to quickly and efficiently soak up liquids, oils, solvents, and other contaminants, leaving surfaces clean and dry. The cloths are also lint-free, ensuring a streak-free and professional finish on various surfaces. Installation and usage of the RS PRO Cloths for Heavy Duty Wiping are hassle-free. Simply grab a cloth from the stack, and you're ready to tackle your cleaning tasks. The cloths are designed to be versatile and adaptable, suitable for wiping, scrubbing, degreasing, and absorbing spills. They can be used in various industries, from automotive and manufacturing to maintenance and janitorial services. The RS PRO Cloths for Heavy Duty Wiping are an ideal choice for heavy-duty cleaning applications. They excel at removing dirt, grease, grime, and contaminants from machinery, equipment, workstations, and surfaces. Their durability and high absorbency significantly reduce the time and effort required to achieve thorough and effective cleaning results. Furthermore, these cloths contribute to a more sustainable and eco-friendly approach to cleaning. Their reusability and durability minimize waste and reduce the need for disposable cleaning materials, making them an environmentally conscious choice
₹11,091  
The RS PRO 2474251 RS PRO EMI/RFI Shielding Aerosol with Bronze colour 400mL Model No 2474251 is a reputable brand known for delivering high-quality industrial products and components across a wide range of categories. As a private-label brand of RS Components, RS PRO ensures that its products meet rigorous industry standards and specifications, providing customers with reliable solutions for their diverse industrial needs. The RS PRO product line includes a vast assortment of items, ranging from electrical and electronic components to hand tools, safety equipment, automation solutions, and much more. These products cater to various industries, including manufacturing, construction, engineering, automotive, aerospace, and maintenance. The brand's commitment to quality is evident in its stringent quality control processes, ensuring that every RS PRO product performs consistently and meets customer expectations. With a focus on customer satisfaction, RS PRO products are designed to be durable, efficient, and cost-effective, offering excellent value for money. RS PRO's reputation for reliability and performance has earned it the trust of professionals, technicians, and engineers worldwide. The brand's dedication to innovation ensures that its product range evolves with changing market demands, incorporating the latest technologies and advancements. The RS PRO brand not only offers a wide selection of standard products but also provides customizable solutions to meet specific application requirements. This versatility allows customers to find the right products for their unique projects and achieve optimal results. In summary, RS PRO is a reputable and dependable brand that stands for quality, performance, and innovation. Its comprehensive product range, coupled with a focus on customer satisfaction, makes it a go-to choice for businesses and individuals seeking top-notch industrial solutions.
₹247  
The RS PRO 1853669 RS PRO 300.0 mm Bi-metal Hacksaw Blade, 18 TPI Model No 1853669 Hand saw blades are used in various woodworking and DIY applications for cutting different materials, such as wood, plastic, and metal. Key Features of RS PRO Hand Saw Blades: Blade Type: RS PRO provides a variety of hand saw blades, each designed for specific cutting tasks and materials. Some common types of hand saw blades include crosscut blades, rip cut blades, and universal blades. Material: Hand saw blades are typically made from high-quality steel or other alloys to ensure durability and long-lasting sharpness. Teeth Per Inch (TPI): The number of teeth per inch on the blade determines the cutting efficiency and the smoothness of the cut. Different TPI options are available for various cutting applications. Compatibility: RS PRO hand saw blades are designed to fit into standard hand saws, ensuring compatibility and ease of use. Size and Length: Hand saw blades come in various sizes and lengths to suit different hand saws and cutting requirements. Packaging: Hand saw blades are often available in individual packs or multi-packs for convenience. RS PRO Hand Saw Blades are essential tools for woodworking, construction, and general cutting tasks. They allow users to make precise and efficient cuts, making them ideal for a wide range of applications. When choosing a hand saw blade from RS PRO, consider factors such as the type of cutting task, the material being cut, and the TPI required for the job. Different hand saw blades are optimized for specific cutting tasks, and selecting the right one will ensure better results and prolong the life of the blade.
₹48   ₹48
You save ₹0!
0.82% OFF
The RS PRO 1853710 RS PRO 150.0 mm High Carbon Steel Hacksaw Blade, 32 TPI Model No 1853710 Hand saw blades are used in various woodworking and DIY applications for cutting different materials, such as wood, plastic, and metal. Key Features of RS PRO Hand Saw Blades: Blade Type: RS PRO provides a variety of hand saw blades, each designed for specific cutting tasks and materials. Some common types of hand saw blades include crosscut blades, rip cut blades, and universal blades. Material: Hand saw blades are typically made from high-quality steel or other alloys to ensure durability and long-lasting sharpness. Teeth Per Inch (TPI): The number of teeth per inch on the blade determines the cutting efficiency and the smoothness of the cut. Different TPI options are available for various cutting applications. Compatibility: RS PRO hand saw blades are designed to fit into standard hand saws, ensuring compatibility and ease of use. Size and Length: Hand saw blades come in various sizes and lengths to suit different hand saws and cutting requirements. Packaging: Hand saw blades are often available in individual packs or multi-packs for convenience. RS PRO Hand Saw Blades are essential tools for woodworking, construction, and general cutting tasks. They allow users to make precise and efficient cuts, making them ideal for a wide range of applications. When choosing a hand saw blade from RS PRO, consider factors such as the type of cutting task, the material being cut, and the TPI required for the job. Different hand saw blades are optimized for specific cutting tasks, and selecting the right one will ensure better results and prolong the life of the blade.
₹31,499  
RS PRO 50 L Maintenance Spill Kit Model No 8725754RS PRO Spill Kits are comprehensive and reliable solutions designed to handle hazardous spills quickly and effectively, promoting workplace safety and environmental protection. Crafted with meticulous attention to detail, these spill kits are essential assets in industries where the accidental release of hazardous substances poses a risk. Each RS PRO Spill Kit contains a carefully selected combination of absorbents, containment tools, personal protective equipment (PPE), and disposal materials. These components are specifically tailored to address various types of spills, including oils, chemicals, solvents, and other hazardous liquids. The absorbent materials in the spill kits, such as absorbent pads, socks, and pillows, efficiently soak up and contain spilled substances, minimizing the spread and potential harm to personnel and the environment. RS PRO Spill Kits come in different sizes and types, from small spill trays suitable for minor spills to large wheeled containers for major accidents. This variety allows users to select the appropriate spill kit according to their specific needs and facility size. These spill kits are equipped with clear instructions and guidelines for safe and effective use, enabling quick response and minimizing downtime in emergency situations. RS PRO prioritizes quality and compliance with industry standards, ensuring their spill kits meet strict safety and environmental regulations. Invest in RS PRO Spill Kits to safeguard your workplace, protect the environment, and mitigate the consequences of hazardous spills.
Recommended Items
oos-available Ships within 24 hrs
sku-leadTime Ships within 10 days
21
Pack of 40 piece
₹110 ₹110
0.01% OFF
oos-available Ships within 24 hrs
oos-available Ships within 24 hrs
oos-available Ships within 24 hrs
oos-available Ships within 24 hrs
oos-available Ships within 24 hrs
oos-available Ships within 24 hrs
oos-available Ships within 24 hrs
oos-available Ships within 24 hrs
oos-available Ships within 24 hrs
Browsing History
sku-leadTime Ships within 5 days
sku-leadTime Ships within 7 days
sku-leadTime Ships within 3 days
sku-leadTime Ships within 7 days
sku-leadTime Ships within 10 days

Top Selling RS PRO Cleaning Products Price List for August 2026

This data was last updated on 13/08/2026