• Home /
• All Brands /
• RS PRO /
• Testing and Measuring Instruments

Have a question? Call us now at +91 9650660070

RS PRO Testing and Measuring Instruments

Showing 40 out of 1650 products

Sort by

Recommended New Price : Low to High Price : High to Low

Ships within 24 hrs

RS PRO 100mm Spirit Level Model No 1779344

By RS PRO

₹2,123  

Add to Cart Buy Now

Ships within 24 hrs

RS PRO IIT2000 Dielectric Strength Tester, 50V Min, 1000V Max, 9.5GΩ Max Model No 9176298

By RS PRO

₹2,24,199  

RS PRO IIT2000 Dielectric Strength Tester, 50V Min, 1000V Max, 9.5GΩ Max Model No 9176298 is an electrical testing instrument used to assess the dielectric strength or electrical insulation properties of electrical equipment and components. The dielectric strength of a material is its ability to withstand electric stress without breaking down and conducting electricity. Dielectric strength testing is essential to ensure the safety and reliability of electrical systems, especially in high-voltage applications.
Key features and functions of a dielectric strength tester include:
High Voltage Output: Dielectric strength testers generate high voltage, typically ranging from hundreds to thousands of volts, which is applied to the electrical component being tested. The high voltage simulates extreme conditions to assess the insulation's ability to withstand voltage stresses.
Insulation Breakdown Detection: During the test, the instrument measures the current flowing through the insulation. If the insulation fails and breaks down, a sudden increase in current is detected, indicating a potential fault or breakdown in the material.
Adjustable Test Voltage: Dielectric strength testers often allow users to adjust the test voltage to suit the specific requirements of the equipment being tested.
Ramp and Step Voltage Tests: Some advanced dielectric strength testers can perform ramp and step voltage tests. In a ramp test, the voltage is increased gradually until breakdown occurs, while in a step test, the voltage is applied in discrete steps.
Leakage Current Measurement: Dielectric strength testers may include a leakage current measurement feature to assess the insulation's quality further. High leakage current could indicate moisture or contamination issues affecting the insulation.
Dielectric strength testing is critical in various electrical applications, including:
Testing Electrical Equipment: Dielectric strength testers are used to evaluate the insulation quality of transformers, cables, motors, capacitors, and other electrical devices.
Product Quality Control: During manufacturing, dielectric strength testing is performed on electrical components to verify their insulation integrity before they are assembled into larger systems.
Regulatory Compliance: Many safety standards and regulations require dielectric strength testing to ensure the safety of electrical equipment and installations.
Proper safety precautions are essential when using a dielectric strength tester, as it involves high voltages that can be hazardous. Users must follow safety guidelines and use appropriate personal protective equipment to avoid electrical accidents.
In summary, dielectric strength testers are indispensable tools for assessing the electrical insulation properties of electrical equipment and components. By identifying weaknesses in insulation, they help prevent equipment failures, electrical accidents, and potential hazards, thereby ensuring the safety and reliability of electrical systems.

Add to Cart Buy Now

Ships within 24 hrs

RS PRO ET5300 Earth Tester 2kΩ Model No 1445339

By RS PRO

₹20,059  

Add to Cart Buy Now

Ships within 24 hrs

RS PRO Temperature Sensitive Label 60°C to 90°C 2 Levels, 286175

By RS PRO

₹306  

The RS PRO Temperature Sensitive Label 60°C to 90°C 2 Levels, 286175 is a cutting-edge and versatile tool meticulously designed to provide real-time visual indication of temperature variations on various surfaces. Crafted with precision and a focus on superior quality, this temperature-sensitive label has established itself as an essential element in industries and environments where accurate temperature monitoring is crucial for quality control and safety. Engineered for optimal temperature sensitivity and ease of use, the RS PRO Temperature Sensitive Label 60°C to 90°C 2 Levels, 286175 is meticulously crafted to change color based on the temperature it is exposed to. Its adaptability ensures its relevance in scenarios ranging from food storage and transportation to industrial manufacturing and equipment maintenance, where maintaining specific temperature ranges is essential. At its core, the temperature-sensitive label features a comprehensive design that includes specialized materials containing heat-sensitive pigments. This design enables the label to undergo a visible color change at specific temperature thresholds. The label's design often includes a range of temperature options and corresponding color transitions, providing an intuitive and rapid visual reference for temperature conditions. Exceeding international quality and performance standards, the RS PRO Temperature Sensitive Label 60°C to 90°C 2 Levels, 286175 guarantees exceptional reliability and functionality. Rigorous testing validates its temperature sensitivity, color transition accuracy, and adherence to industry-specific requirements, instilling confidence in users who rely on it for temperature monitoring. Application of the temperature-sensitive label is straightforward, often requiring proper placement on surfaces that require temperature monitoring. Once applied, it becomes an integral part of the monitoring process, offering an immediate and easily interpretable visual indicator of temperature conditions. Its adaptability shines through whether it's utilized in cold chain logistics, medical storage, or quality control processes, underscoring its significance across various sectors. In conclusion, the RS PRO Temperature Sensitive Label 60°C to 90°C 2 Levels, 286175 stands as an innovative and practical tool for those seeking accurate and real-time temperature monitoring, simplicity, and adaptability. Its comprehensive design, color-changing capabilities, and adherence to international guidelines make it a favored choice across various applications. Whether used in industrial operations or sensitive environments, this temperature-sensitive label ensures rapid and accurate temperature indication, providing users with the assurance of a high-quality monitoring accessory.

Add to Cart Buy Now

Related Searches

rs pro digital multimeters

rs pro test instrument carrying cases

rs pro digital clamp meter

rs pro test probes

rs pro pressure gauge

Ships within 24 hrs

RS PRO Magnifier, 10X x Magnification, 25mm Diameter Model No 1368106

By RS PRO

₹235  

RS PRO Magnifier, 10X x Magnification, 25mm Diameter Model No 1368106 is a simple optical device used to enlarge the apparent size of objects or text, making them easier to see and examine in detail. It consists of a convex lens, typically made of glass or plastic, that converges light rays to produce a magnified image when placed between the eye and the object.
When using a magnifier, the object is held close to the lens, and the lens is positioned near the eye, usually held with the hand or mounted in a frame or handle. The convex shape of the lens causes light rays from the object to bend and converge, creating a larger virtual image that appears closer to the observer than the actual object.
Key features and benefits of magnifiers include:
Magnification: The primary function of a magnifier is to provide magnification, allowing users with visual impairments or those working with small objects to see details that would otherwise be difficult to discern.
Portable: Magnifiers are lightweight and portable, making them convenient for on-the-go use or in fieldwork.
Low-Cost Solution: Magnifiers are an affordable and accessible tool for anyone needing to enlarge small objects or text.
Versatility: Magnifiers are used in a variety of applications, including reading small print, examining documents, inspecting tiny components in electronics or jewelry, and observing insects or plants in nature.
Non-Electronic: Magnifiers do not require any power source or batteries, making them always ready for use.
Magnifiers come in different shapes and sizes to cater to specific needs and magnification requirements. Some magnifiers have built-in LED lights or illumination to enhance visibility in low-light conditions. Magnifiers can have different magnification powers, typically represented by "X" (e.g., 2X, 5X, 10X), indicating how many times the object appears larger than its actual size.
In addition to handheld magnifiers, other types of magnifiers include stand magnifiers for hands-free use, loupe magnifiers for jewelry and watchmaking, and magnifying visors for more extended tasks.
Overall, magnifiers are valuable tools for individuals with visual challenges and professionals who require close examination and analysis of small objects or text. They offer a straightforward and cost-effective solution for enlarging and exploring details that may not be visible to the naked eye, enhancing the overall visual experience.

Add to Cart Buy Now

Ships within 15 days

RS PRO Solar Power Meter & Digital Multimeter DT-1307 Model No 1938689

By RS PRO

₹14,159  

Add to Cart Buy Now

Ships within 15 days

RS PRO Multimeter Current Clamp Adapter, 1000A, 1000A ac, 51mm 1233224

By RS PRO

₹36,579  

RS PRO Multimeter Current Clamp Adapter, 1000A, 1000A ac, 51mm Model No 1233224 is a versatile electrical measuring device used to measure the current flowing through a conductor without the need for physical contact or breaking the circuit. It is a non-invasive tool, making it safe and easy to measure current in live circuits and high-voltage systems.
Key features and functions of a current clamp adapter are as follows:
Non-Invasive Measurement: Current clamp adapters are designed to encircle or "clamp" around the conductor carrying the current. They do not require any direct electrical connection to the circuit, eliminating the need to open the circuit or disconnect any wires.
Inductive Principle: Current clamp adapters utilize the principle of electromagnetic induction to measure current. When current flows through a conductor, it generates a magnetic field, and the current clamp adapter senses this magnetic field to determine the current value.
Sensing Range: Current clamp adapters come in various sizes and models, each with a specific current sensing range. The range varies from a few milliamperes to thousands of amperes, allowing measurement in a wide range of applications.
Display: Many current clamp adapters have an integrated display that shows the measured current value in amperes or milliamperes, making it easy to read and interpret the current measurement.
Compatibility: Current clamp adapters are compatible with a variety of measurement devices, such as multimeters, oscilloscopes, and data loggers. They can connect to these devices using a BNC or banana plug connector.
AC and DC Current Measurement: Current clamp adapters can measure both alternating current (AC) and direct current (DC), making them suitable for various electrical systems and applications.
Safety: Current clamp adapters are designed with safety features, such as insulated housing and jaws, to ensure user safety during measurements.
Current clamp adapters find extensive use in industries such as electrical maintenance, industrial troubleshooting, automotive diagnostics, and energy auditing. They are especially valuable in situations where it is impractical or unsafe to break the electrical circuit to insert a traditional ammeter for current measurement.
Using a current clamp adapter is straightforward: the jaws are opened, placed around the conductor carrying the current, and then closed. The current reading is displayed on the connected measurement device. These devices have significantly simplified current measurements, enabling quick and accurate assessment of electrical systems and helping identify potential issues before they become critical problems.

Add to Cart Buy Now

Ships within 15 days

RS PRO ICM20 Clampmeter, IDM20 Digital Multimeter Kit Model No 1446602 (Each of 1 Kit)

By RS PRO

₹18,879  

RS PRO ICM20 Clampmeter, IDM20 Digital Multimeter Kit Model No 1446602 (Each of 1 Kit) is a versatile electrical measurement tool used to measure electric currents in a conductor without the need to disconnect the circuit. It is a practical and safe instrument that allows electricians, technicians, and engineers to measure current in live circuits without the risk of exposure to high voltages.
The key components of a clamp meter include:
Clamp Jaw: The clamp meter features a hinged clamp jaw that can be opened and closed around a conductor to measure the current flowing through it. The clamp jaw is made of a magnetic material and contains a current sensor.
Digital Display: Most modern clamp meters have a digital display that shows the measured current in amps (A) or milliamps (mA). Some clamp meters may also display other electrical parameters, such as voltage, resistance, frequency, and capacitance.
Rotary Dial or Selector: The clamp meter usually has a rotary dial or a selector switch to set the range and mode of measurement. Different ranges allow the clamp meter to measure different levels of current accurately.
Function Buttons: Function buttons allow the user to select additional features and modes, such as data hold, peak hold, and auto-ranging.
To measure current with a clamp meter, the user simply opens the clamp jaw, places it around the conductor, and closes it securely. The magnetic field generated by the current induces a voltage in the clamp jaw's sensor, which is then converted into an electrical signal proportional to the current. The clamp meter displays the measured current on the digital screen.
Clamp meters are widely used in various electrical applications, including:
Troubleshooting and Maintenance: Clamp meters are invaluable for diagnosing electrical problems, such as identifying overloads, short circuits, and ground faults.
Electrical Installations: Electricians use clamp meters to verify current readings during installation, ensuring that circuits are properly wired and balanced.
HVAC Systems: Clamp meters are used to measure current in HVAC systems, such as in motors, compressors, and fan motors.
Industrial Maintenance: In industrial settings, clamp meters are used to monitor and maintain equipment, motors, and electrical systems.
Clamp meters come in various types, with some offering additional functions like true RMS measurement, temperature measurement, and Bluetooth connectivity for data logging and remote monitoring. Proper calibration and use of the clamp meter are essential for accurate and safe measurements.

Add to Cart Buy Now

Ships within 15 days

RS PRO RS380 Clamp Meter, Max Current 400A ac CAT III 600 V Model No 1231935

By RS PRO

₹8,377  

RS PRO RS380 Clamp Meter, Max Current 400A ac CAT III 600 V Model No 1231935 is a versatile electrical measurement tool used to measure electric currents in a conductor without the need to disconnect the circuit. It is a practical and safe instrument that allows electricians, technicians, and engineers to measure current in live circuits without the risk of exposure to high voltages.
The key components of a clamp meter include:
Clamp Jaw: The clamp meter features a hinged clamp jaw that can be opened and closed around a conductor to measure the current flowing through it. The clamp jaw is made of a magnetic material and contains a current sensor.
Digital Display: Most modern clamp meters have a digital display that shows the measured current in amps (A) or milliamps (mA). Some clamp meters may also display other electrical parameters, such as voltage, resistance, frequency, and capacitance.
Rotary Dial or Selector: The clamp meter usually has a rotary dial or a selector switch to set the range and mode of measurement. Different ranges allow the clamp meter to measure different levels of current accurately.
Function Buttons: Function buttons allow the user to select additional features and modes, such as data hold, peak hold, and auto-ranging.
To measure current with a clamp meter, the user simply opens the clamp jaw, places it around the conductor, and closes it securely. The magnetic field generated by the current induces a voltage in the clamp jaw's sensor, which is then converted into an electrical signal proportional to the current. The clamp meter displays the measured current on the digital screen.
Clamp meters are widely used in various electrical applications, including:
Troubleshooting and Maintenance: Clamp meters are invaluable for diagnosing electrical problems, such as identifying overloads, short circuits, and ground faults.
Electrical Installations: Electricians use clamp meters to verify current readings during installation, ensuring that circuits are properly wired and balanced.
HVAC Systems: Clamp meters are used to measure current in HVAC systems, such as in motors, compressors, and fan motors.
Industrial Maintenance: In industrial settings, clamp meters are used to monitor and maintain equipment, motors, and electrical systems.
Clamp meters come in various types, with some offering additional functions like true RMS measurement, temperature measurement, and Bluetooth connectivity for data logging and remote monitoring. Proper calibration and use of the clamp meter are essential for accurate and safe measurements.

Add to Cart Buy Now

Ships within 15 days

RS PRO RS330 Clamp Meter, Max Current 400A ac With UKAS Calibration Model No 1231984

By RS PRO

₹28,319  

RS PRO RS330 Clamp Meter, Max Current 400A ac With UKAS Calibration Model No 1231984 is a versatile electrical measurement tool used to measure electric currents in a conductor without the need to disconnect the circuit. It is a practical and safe instrument that allows electricians, technicians, and engineers to measure current in live circuits without the risk of exposure to high voltages.
The key components of a clamp meter include:
Clamp Jaw: The clamp meter features a hinged clamp jaw that can be opened and closed around a conductor to measure the current flowing through it. The clamp jaw is made of a magnetic material and contains a current sensor.
Digital Display: Most modern clamp meters have a digital display that shows the measured current in amps (A) or milliamps (mA). Some clamp meters may also display other electrical parameters, such as voltage, resistance, frequency, and capacitance.
Rotary Dial or Selector: The clamp meter usually has a rotary dial or a selector switch to set the range and mode of measurement. Different ranges allow the clamp meter to measure different levels of current accurately.
Function Buttons: Function buttons allow the user to select additional features and modes, such as data hold, peak hold, and auto-ranging.
To measure current with a clamp meter, the user simply opens the clamp jaw, places it around the conductor, and closes it securely. The magnetic field generated by the current induces a voltage in the clamp jaw's sensor, which is then converted into an electrical signal proportional to the current. The clamp meter displays the measured current on the digital screen.
Clamp meters are widely used in various electrical applications, including:
Troubleshooting and Maintenance: Clamp meters are invaluable for diagnosing electrical problems, such as identifying overloads, short circuits, and ground faults.
Electrical Installations: Electricians use clamp meters to verify current readings during installation, ensuring that circuits are properly wired and balanced.
HVAC Systems: Clamp meters are used to measure current in HVAC systems, such as in motors, compressors, and fan motors.
Industrial Maintenance: In industrial settings, clamp meters are used to monitor and maintain equipment, motors, and electrical systems.
Clamp meters come in various types, with some offering additional functions like true RMS measurement, temperature measurement, and Bluetooth connectivity for data logging and remote monitoring. Proper calibration and use of the clamp meter are essential for accurate and safe measurements.

Add to Cart Buy Now

Ships within 15 days

RS PRO RS330 Clamp Meter, Max Current 400A ac With RS Calibration Model No 1231983

By RS PRO

₹21,239  

RS PRO RS330 Clamp Meter, Max Current 400A ac With RS Calibration Model No 1231983 is a versatile electrical measurement tool used to measure electric currents in a conductor without the need to disconnect the circuit. It is a practical and safe instrument that allows electricians, technicians, and engineers to measure current in live circuits without the risk of exposure to high voltages.
The key components of a clamp meter include:
Clamp Jaw: The clamp meter features a hinged clamp jaw that can be opened and closed around a conductor to measure the current flowing through it. The clamp jaw is made of a magnetic material and contains a current sensor.
Digital Display: Most modern clamp meters have a digital display that shows the measured current in amps (A) or milliamps (mA). Some clamp meters may also display other electrical parameters, such as voltage, resistance, frequency, and capacitance.
Rotary Dial or Selector: The clamp meter usually has a rotary dial or a selector switch to set the range and mode of measurement. Different ranges allow the clamp meter to measure different levels of current accurately.
Function Buttons: Function buttons allow the user to select additional features and modes, such as data hold, peak hold, and auto-ranging.
To measure current with a clamp meter, the user simply opens the clamp jaw, places it around the conductor, and closes it securely. The magnetic field generated by the current induces a voltage in the clamp jaw's sensor, which is then converted into an electrical signal proportional to the current. The clamp meter displays the measured current on the digital screen.
Clamp meters are widely used in various electrical applications, including:
Troubleshooting and Maintenance: Clamp meters are invaluable for diagnosing electrical problems, such as identifying overloads, short circuits, and ground faults.
Electrical Installations: Electricians use clamp meters to verify current readings during installation, ensuring that circuits are properly wired and balanced.
HVAC Systems: Clamp meters are used to measure current in HVAC systems, such as in motors, compressors, and fan motors.
Industrial Maintenance: In industrial settings, clamp meters are used to monitor and maintain equipment, motors, and electrical systems.
Clamp meters come in various types, with some offering additional functions like true RMS measurement, temperature measurement, and Bluetooth connectivity for data logging and remote monitoring. Proper calibration and use of the clamp meter are essential for accurate and safe measurements.

Add to Cart Buy Now

Ships within 15 days

RS PRO RS330 Clamp Meter, Max Current 400A ac Model No 1231936

By RS PRO

₹7,315  

RS PRO RS330 Clamp Meter, Max Current 400A ac Model No 1231936 is a versatile electrical measurement tool used to measure electric currents in a conductor without the need to disconnect the circuit. It is a practical and safe instrument that allows electricians, technicians, and engineers to measure current in live circuits without the risk of exposure to high voltages.
The key components of a clamp meter include:
Clamp Jaw: The clamp meter features a hinged clamp jaw that can be opened and closed around a conductor to measure the current flowing through it. The clamp jaw is made of a magnetic material and contains a current sensor.
Digital Display: Most modern clamp meters have a digital display that shows the measured current in amps (A) or milliamps (mA). Some clamp meters may also display other electrical parameters, such as voltage, resistance, frequency, and capacitance.
Rotary Dial or Selector: The clamp meter usually has a rotary dial or a selector switch to set the range and mode of measurement. Different ranges allow the clamp meter to measure different levels of current accurately.
Function Buttons: Function buttons allow the user to select additional features and modes, such as data hold, peak hold, and auto-ranging.
To measure current with a clamp meter, the user simply opens the clamp jaw, places it around the conductor, and closes it securely. The magnetic field generated by the current induces a voltage in the clamp jaw's sensor, which is then converted into an electrical signal proportional to the current. The clamp meter displays the measured current on the digital screen.
Clamp meters are widely used in various electrical applications, including:
Troubleshooting and Maintenance: Clamp meters are invaluable for diagnosing electrical problems, such as identifying overloads, short circuits, and ground faults.
Electrical Installations: Electricians use clamp meters to verify current readings during installation, ensuring that circuits are properly wired and balanced.
HVAC Systems: Clamp meters are used to measure current in HVAC systems, such as in motors, compressors, and fan motors.
Industrial Maintenance: In industrial settings, clamp meters are used to monitor and maintain equipment, motors, and electrical systems.
Clamp meters come in various types, with some offering additional functions like true RMS measurement, temperature measurement, and Bluetooth connectivity for data logging and remote monitoring. Proper calibration and use of the clamp meter are essential for accurate and safe measurements.

Add to Cart Buy Now

Ships within 15 days

RS PRO IPM6600 Clamp Meter, Max Current 2kA ac CAT III 600 V Model No 1232208

By RS PRO

₹1,07,379  

RS PRO IPM6600 Clamp Meter, Max Current 2kA ac CAT III 600 V Model No 1232208 is a versatile electrical measurement tool used to measure electric currents in a conductor without the need to disconnect the circuit. It is a practical and safe instrument that allows electricians, technicians, and engineers to measure current in live circuits without the risk of exposure to high voltages.
The key components of a clamp meter include:
Clamp Jaw: The clamp meter features a hinged clamp jaw that can be opened and closed around a conductor to measure the current flowing through it. The clamp jaw is made of a magnetic material and contains a current sensor.
Digital Display: Most modern clamp meters have a digital display that shows the measured current in amps (A) or milliamps (mA). Some clamp meters may also display other electrical parameters, such as voltage, resistance, frequency, and capacitance.
Rotary Dial or Selector: The clamp meter usually has a rotary dial or a selector switch to set the range and mode of measurement. Different ranges allow the clamp meter to measure different levels of current accurately.
Function Buttons: Function buttons allow the user to select additional features and modes, such as data hold, peak hold, and auto-ranging.
To measure current with a clamp meter, the user simply opens the clamp jaw, places it around the conductor, and closes it securely. The magnetic field generated by the current induces a voltage in the clamp jaw's sensor, which is then converted into an electrical signal proportional to the current. The clamp meter displays the measured current on the digital screen.
Clamp meters are widely used in various electrical applications, including:
Troubleshooting and Maintenance: Clamp meters are invaluable for diagnosing electrical problems, such as identifying overloads, short circuits, and ground faults.
Electrical Installations: Electricians use clamp meters to verify current readings during installation, ensuring that circuits are properly wired and balanced.
HVAC Systems: Clamp meters are used to measure current in HVAC systems, such as in motors, compressors, and fan motors.
Industrial Maintenance: In industrial settings, clamp meters are used to monitor and maintain equipment, motors, and electrical systems.
Clamp meters come in various types, with some offering additional functions like true RMS measurement, temperature measurement, and Bluetooth connectivity for data logging and remote monitoring. Proper calibration and use of the clamp meter are essential for accurate and safe measurements.

Add to Cart Buy Now

Ships within 15 days

RS PRO IPM6600 Clamp Meter, 2000A dc, Max Current 2kA ac CAT III 600 V With RS Calibration 1232344

By RS PRO

₹1,29,799  

RS PRO IPM6600 Clamp Meter, 2000A dc, Max Current 2kA ac CAT III 600 V With RS Calibration Model No 1232344 is a versatile electrical measurement tool used to measure electric currents in a conductor without the need to disconnect the circuit. It is a practical and safe instrument that allows electricians, technicians, and engineers to measure current in live circuits without the risk of exposure to high voltages.
The key components of a clamp meter include:
Clamp Jaw: The clamp meter features a hinged clamp jaw that can be opened and closed around a conductor to measure the current flowing through it. The clamp jaw is made of a magnetic material and contains a current sensor.
Digital Display: Most modern clamp meters have a digital display that shows the measured current in amps (A) or milliamps (mA). Some clamp meters may also display other electrical parameters, such as voltage, resistance, frequency, and capacitance.
Rotary Dial or Selector: The clamp meter usually has a rotary dial or a selector switch to set the range and mode of measurement. Different ranges allow the clamp meter to measure different levels of current accurately.
Function Buttons: Function buttons allow the user to select additional features and modes, such as data hold, peak hold, and auto-ranging.
To measure current with a clamp meter, the user simply opens the clamp jaw, places it around the conductor, and closes it securely. The magnetic field generated by the current induces a voltage in the clamp jaw's sensor, which is then converted into an electrical signal proportional to the current. The clamp meter displays the measured current on the digital screen.
Clamp meters are widely used in various electrical applications, including:
Troubleshooting and Maintenance: Clamp meters are invaluable for diagnosing electrical problems, such as identifying overloads, short circuits, and ground faults.
Electrical Installations: Electricians use clamp meters to verify current readings during installation, ensuring that circuits are properly wired and balanced.
HVAC Systems: Clamp meters are used to measure current in HVAC systems, such as in motors, compressors, and fan motors.
Industrial Maintenance: In industrial settings, clamp meters are used to monitor and maintain equipment, motors, and electrical systems.
Clamp meters come in various types, with some offering additional functions like true RMS measurement, temperature measurement, and Bluetooth connectivity for data logging and remote monitoring. Proper calibration and use of the clamp meter are essential for accurate and safe measurements.

Add to Cart Buy Now

Ships within 15 days

RS PRO IPM3000N Clamp Meter, Max Current 999.9A ac With 1232378

By RS PRO

₹46,019  

RS PRO IPM3000N Clamp Meter, Max Current 999.9A ac With RS Calibration Model No 1232378 is a versatile electrical measurement tool used to measure electric currents in a conductor without the need to disconnect the circuit. It is a practical and safe instrument that allows electricians, technicians, and engineers to measure current in live circuits without the risk of exposure to high voltages.
The key components of a clamp meter include:
Clamp Jaw: The clamp meter features a hinged clamp jaw that can be opened and closed around a conductor to measure the current flowing through it. The clamp jaw is made of a magnetic material and contains a current sensor.
Digital Display: Most modern clamp meters have a digital display that shows the measured current in amps (A) or milliamps (mA). Some clamp meters may also display other electrical parameters, such as voltage, resistance, frequency, and capacitance.
Rotary Dial or Selector: The clamp meter usually has a rotary dial or a selector switch to set the range and mode of measurement. Different ranges allow the clamp meter to measure different levels of current accurately.
Function Buttons: Function buttons allow the user to select additional features and modes, such as data hold, peak hold, and auto-ranging.
To measure current with a clamp meter, the user simply opens the clamp jaw, places it around the conductor, and closes it securely. The magnetic field generated by the current induces a voltage in the clamp jaw's sensor, which is then converted into an electrical signal proportional to the current. The clamp meter displays the measured current on the digital screen.
Clamp meters are widely used in various electrical applications, including:
Troubleshooting and Maintenance: Clamp meters are invaluable for diagnosing electrical problems, such as identifying overloads, short circuits, and ground faults.
Electrical Installations: Electricians use clamp meters to verify current readings during installation, ensuring that circuits are properly wired and balanced.
HVAC Systems: Clamp meters are used to measure current in HVAC systems, such as in motors, compressors, and fan motors.
Industrial Maintenance: In industrial settings, clamp meters are used to monitor and maintain equipment, motors, and electrical systems.
Clamp meters come in various types, with some offering additional functions like true RMS measurement, temperature measurement, and Bluetooth connectivity for data logging and remote monitoring. Proper calibration and use of the clamp meter are essential for accurate and safe measurements.

Add to Cart Buy Now

Ships within 15 days

RS PRO IPM3000N Clamp Meter, Max Current 1kA ac Model No 1232241

By RS PRO

₹33,039  

RS PRO IPM3000N Clamp Meter, Max Current 1kA ac Model No 1232241 is a versatile electrical measurement tool used to measure electric currents in a conductor without the need to disconnect the circuit. It is a practical and safe instrument that allows electricians, technicians, and engineers to measure current in live circuits without the risk of exposure to high voltages.
The key components of a clamp meter include:
Clamp Jaw: The clamp meter features a hinged clamp jaw that can be opened and closed around a conductor to measure the current flowing through it. The clamp jaw is made of a magnetic material and contains a current sensor.
Digital Display: Most modern clamp meters have a digital display that shows the measured current in amps (A) or milliamps (mA). Some clamp meters may also display other electrical parameters, such as voltage, resistance, frequency, and capacitance.
Rotary Dial or Selector: The clamp meter usually has a rotary dial or a selector switch to set the range and mode of measurement. Different ranges allow the clamp meter to measure different levels of current accurately.
Function Buttons: Function buttons allow the user to select additional features and modes, such as data hold, peak hold, and auto-ranging.
To measure current with a clamp meter, the user simply opens the clamp jaw, places it around the conductor, and closes it securely. The magnetic field generated by the current induces a voltage in the clamp jaw's sensor, which is then converted into an electrical signal proportional to the current. The clamp meter displays the measured current on the digital screen.
Clamp meters are widely used in various electrical applications, including:
Troubleshooting and Maintenance: Clamp meters are invaluable for diagnosing electrical problems, such as identifying overloads, short circuits, and ground faults.
Electrical Installations: Electricians use clamp meters to verify current readings during installation, ensuring that circuits are properly wired and balanced.
HVAC Systems: Clamp meters are used to measure current in HVAC systems, such as in motors, compressors, and fan motors.
Industrial Maintenance: In industrial settings, clamp meters are used to monitor and maintain equipment, motors, and electrical systems.
Clamp meters come in various types, with some offering additional functions like true RMS measurement, temperature measurement, and Bluetooth connectivity for data logging and remote monitoring. Proper calibration and use of the clamp meter are essential for accurate and safe measurements.

Add to Cart Buy Now

Ships within 15 days

RS PRO IPM245F Clamp Meter, 1kA dc, Max Current 1kA ac CAT III 1000V With RS Calibration 1925791

By RS PRO

₹92,039  

RS PRO IPM245F Clamp Meter, 1kA dc, Max Current 1kA ac CAT III 1000V With RS Calibration Model No 1925791 is a versatile electrical measurement tool used to measure electric currents in a conductor without the need to disconnect the circuit. It is a practical and safe instrument that allows electricians, technicians, and engineers to measure current in live circuits without the risk of exposure to high voltages.
The key components of a clamp meter include:
Clamp Jaw: The clamp meter features a hinged clamp jaw that can be opened and closed around a conductor to measure the current flowing through it. The clamp jaw is made of a magnetic material and contains a current sensor.
Digital Display: Most modern clamp meters have a digital display that shows the measured current in amps (A) or milliamps (mA). Some clamp meters may also display other electrical parameters, such as voltage, resistance, frequency, and capacitance.
Rotary Dial or Selector: The clamp meter usually has a rotary dial or a selector switch to set the range and mode of measurement. Different ranges allow the clamp meter to measure different levels of current accurately.
Function Buttons: Function buttons allow the user to select additional features and modes, such as data hold, peak hold, and auto-ranging.
To measure current with a clamp meter, the user simply opens the clamp jaw, places it around the conductor, and closes it securely. The magnetic field generated by the current induces a voltage in the clamp jaw's sensor, which is then converted into an electrical signal proportional to the current. The clamp meter displays the measured current on the digital screen.
Clamp meters are widely used in various electrical applications, including:
Troubleshooting and Maintenance: Clamp meters are invaluable for diagnosing electrical problems, such as identifying overloads, short circuits, and ground faults.
Electrical Installations: Electricians use clamp meters to verify current readings during installation, ensuring that circuits are properly wired and balanced.
HVAC Systems: Clamp meters are used to measure current in HVAC systems, such as in motors, compressors, and fan motors.
Industrial Maintenance: In industrial settings, clamp meters are used to monitor and maintain equipment, motors, and electrical systems.
Clamp meters come in various types, with some offering additional functions like true RMS measurement, temperature measurement, and Bluetooth connectivity for data logging and remote monitoring. Proper calibration and use of the clamp meter are essential for accurate and safe measurements.

Add to Cart Buy Now

Ships within 15 days

RS PRO IPM245F Clamp Meter, 1kA dc, Max Current 1kA ac 1000 V, IV 600 V 1241963

By RS PRO

₹81,419  

RS PRO IPM245F Clamp Meter, 1kA dc, Max Current 1kA ac 1000 V, CAT IV 600 V Model No 1241963 is a versatile electrical measurement tool used to measure electric currents in a conductor without the need to disconnect the circuit. It is a practical and safe instrument that allows electricians, technicians, and engineers to measure current in live circuits without the risk of exposure to high voltages.
The key components of a clamp meter include:
Clamp Jaw: The clamp meter features a hinged clamp jaw that can be opened and closed around a conductor to measure the current flowing through it. The clamp jaw is made of a magnetic material and contains a current sensor.
Digital Display: Most modern clamp meters have a digital display that shows the measured current in amps (A) or milliamps (mA). Some clamp meters may also display other electrical parameters, such as voltage, resistance, frequency, and capacitance.
Rotary Dial or Selector: The clamp meter usually has a rotary dial or a selector switch to set the range and mode of measurement. Different ranges allow the clamp meter to measure different levels of current accurately.
Function Buttons: Function buttons allow the user to select additional features and modes, such as data hold, peak hold, and auto-ranging.
To measure current with a clamp meter, the user simply opens the clamp jaw, places it around the conductor, and closes it securely. The magnetic field generated by the current induces a voltage in the clamp jaw's sensor, which is then converted into an electrical signal proportional to the current. The clamp meter displays the measured current on the digital screen.
Clamp meters are widely used in various electrical applications, including:
Troubleshooting and Maintenance: Clamp meters are invaluable for diagnosing electrical problems, such as identifying overloads, short circuits, and ground faults.
Electrical Installations: Electricians use clamp meters to verify current readings during installation, ensuring that circuits are properly wired and balanced.
HVAC Systems: Clamp meters are used to measure current in HVAC systems, such as in motors, compressors, and fan motors.
Industrial Maintenance: In industrial settings, clamp meters are used to monitor and maintain equipment, motors, and electrical systems.
Clamp meters come in various types, with some offering additional functions like true RMS measurement, temperature measurement, and Bluetooth connectivity for data logging and remote monitoring. Proper calibration and use of the clamp meter are essential for accurate and safe measurements.

Add to Cart Buy Now

Ships within 15 days

RS PRO IPM138N Clamp Meter, 600A dc, Max Current 600A ac CAT II 1000V With RS Calibration 1925787

By RS PRO

₹69,619  

RS PRO IPM138N Clamp Meter, 600A dc, Max Current 600A ac CAT II 1000V With RS Calibration Model No 1925787 is a versatile electrical measurement tool used to measure electric currents in a conductor without the need to disconnect the circuit. It is a practical and safe instrument that allows electricians, technicians, and engineers to measure current in live circuits without the risk of exposure to high voltages.
The key components of a clamp meter include:
Clamp Jaw: The clamp meter features a hinged clamp jaw that can be opened and closed around a conductor to measure the current flowing through it. The clamp jaw is made of a magnetic material and contains a current sensor.
Digital Display: Most modern clamp meters have a digital display that shows the measured current in amps (A) or milliamps (mA). Some clamp meters may also display other electrical parameters, such as voltage, resistance, frequency, and capacitance.
Rotary Dial or Selector: The clamp meter usually has a rotary dial or a selector switch to set the range and mode of measurement. Different ranges allow the clamp meter to measure different levels of current accurately.
Function Buttons: Function buttons allow the user to select additional features and modes, such as data hold, peak hold, and auto-ranging.
To measure current with a clamp meter, the user simply opens the clamp jaw, places it around the conductor, and closes it securely. The magnetic field generated by the current induces a voltage in the clamp jaw's sensor, which is then converted into an electrical signal proportional to the current. The clamp meter displays the measured current on the digital screen.
Clamp meters are widely used in various electrical applications, including:
Troubleshooting and Maintenance: Clamp meters are invaluable for diagnosing electrical problems, such as identifying overloads, short circuits, and ground faults.
Electrical Installations: Electricians use clamp meters to verify current readings during installation, ensuring that circuits are properly wired and balanced.
HVAC Systems: Clamp meters are used to measure current in HVAC systems, such as in motors, compressors, and fan motors.
Industrial Maintenance: In industrial settings, clamp meters are used to monitor and maintain equipment, motors, and electrical systems.
Clamp meters come in various types, with some offering additional functions like true RMS measurement, temperature measurement, and Bluetooth connectivity for data logging and remote monitoring. Proper calibration and use of the clamp meter are essential for accurate and safe measurements.

Add to Cart Buy Now

Ships within 15 days

RS PRO IPM138N Clamp Meter, 600A dc, Max Current 600A ac CAT II 1000 V, CAT III 600 V 1233258

By RS PRO

₹57,819  

RS PRO IPM138N Clamp Meter, 600A dc, Max Current 600A ac CAT II 1000 V, CAT III 600 V Model No 1233258 is a versatile electrical measurement tool used to measure electric currents in a conductor without the need to disconnect the circuit. It is a practical and safe instrument that allows electricians, technicians, and engineers to measure current in live circuits without the risk of exposure to high voltages.
The key components of a clamp meter include:
Clamp Jaw: The clamp meter features a hinged clamp jaw that can be opened and closed around a conductor to measure the current flowing through it. The clamp jaw is made of a magnetic material and contains a current sensor.
Digital Display: Most modern clamp meters have a digital display that shows the measured current in amps (A) or milliamps (mA). Some clamp meters may also display other electrical parameters, such as voltage, resistance, frequency, and capacitance.
Rotary Dial or Selector: The clamp meter usually has a rotary dial or a selector switch to set the range and mode of measurement. Different ranges allow the clamp meter to measure different levels of current accurately.
Function Buttons: Function buttons allow the user to select additional features and modes, such as data hold, peak hold, and auto-ranging.
To measure current with a clamp meter, the user simply opens the clamp jaw, places it around the conductor, and closes it securely. The magnetic field generated by the current induces a voltage in the clamp jaw's sensor, which is then converted into an electrical signal proportional to the current. The clamp meter displays the measured current on the digital screen.
Clamp meters are widely used in various electrical applications, including:
Troubleshooting and Maintenance: Clamp meters are invaluable for diagnosing electrical problems, such as identifying overloads, short circuits, and ground faults.
Electrical Installations: Electricians use clamp meters to verify current readings during installation, ensuring that circuits are properly wired and balanced.
HVAC Systems: Clamp meters are used to measure current in HVAC systems, such as in motors, compressors, and fan motors.
Industrial Maintenance: In industrial settings, clamp meters are used to monitor and maintain equipment, motors, and electrical systems.
Clamp meters come in various types, with some offering additional functions like true RMS measurement, temperature measurement, and Bluetooth connectivity for data logging and remote monitoring. Proper calibration and use of the clamp meter are essential for accurate and safe measurements.

Add to Cart Buy Now

Ships within 15 days

RS PRO ILCM03A Clamp Meter, Max Current 60A ac Model No 1232204

By RS PRO

₹62,539  

RS PRO ILCM03A Clamp Meter, Max Current 60A ac Model No 1232204 is a versatile electrical measurement tool used to measure electric currents in a conductor without the need to disconnect the circuit. It is a practical and safe instrument that allows electricians, technicians, and engineers to measure current in live circuits without the risk of exposure to high voltages.
The key components of a clamp meter include:
Clamp Jaw: The clamp meter features a hinged clamp jaw that can be opened and closed around a conductor to measure the current flowing through it. The clamp jaw is made of a magnetic material and contains a current sensor.
Digital Display: Most modern clamp meters have a digital display that shows the measured current in amps (A) or milliamps (mA). Some clamp meters may also display other electrical parameters, such as voltage, resistance, frequency, and capacitance.
Rotary Dial or Selector: The clamp meter usually has a rotary dial or a selector switch to set the range and mode of measurement. Different ranges allow the clamp meter to measure different levels of current accurately.
Function Buttons: Function buttons allow the user to select additional features and modes, such as data hold, peak hold, and auto-ranging.
To measure current with a clamp meter, the user simply opens the clamp jaw, places it around the conductor, and closes it securely. The magnetic field generated by the current induces a voltage in the clamp jaw's sensor, which is then converted into an electrical signal proportional to the current. The clamp meter displays the measured current on the digital screen.
Clamp meters are widely used in various electrical applications, including:
Troubleshooting and Maintenance: Clamp meters are invaluable for diagnosing electrical problems, such as identifying overloads, short circuits, and ground faults.
Electrical Installations: Electricians use clamp meters to verify current readings during installation, ensuring that circuits are properly wired and balanced.
HVAC Systems: Clamp meters are used to measure current in HVAC systems, such as in motors, compressors, and fan motors.
Industrial Maintenance: In industrial settings, clamp meters are used to monitor and maintain equipment, motors, and electrical systems.
Clamp meters come in various types, with some offering additional functions like true RMS measurement, temperature measurement, and Bluetooth connectivity for data logging and remote monitoring. Proper calibration and use of the clamp meter are essential for accurate and safe measurements.

Add to Cart Buy Now

Ships within 15 days

RS PRO IEK10N Clamp Meter, Max Current 300A ac CAT II 600 V, 300 V With UKAS Calibration 1242001

By RS PRO

₹46,019  

RS PRO IEK10N Clamp Meter, Max Current 300A ac CAT II 600 V, CAT III 300 V With UKAS Calibration Model No 1242001 is a versatile electrical measurement tool used to measure electric currents in a conductor without the need to disconnect the circuit. It is a practical and safe instrument that allows electricians, technicians, and engineers to measure current in live circuits without the risk of exposure to high voltages.
The key components of a clamp meter include:
Clamp Jaw: The clamp meter features a hinged clamp jaw that can be opened and closed around a conductor to measure the current flowing through it. The clamp jaw is made of a magnetic material and contains a current sensor.
Digital Display: Most modern clamp meters have a digital display that shows the measured current in amps (A) or milliamps (mA). Some clamp meters may also display other electrical parameters, such as voltage, resistance, frequency, and capacitance.
Rotary Dial or Selector: The clamp meter usually has a rotary dial or a selector switch to set the range and mode of measurement. Different ranges allow the clamp meter to measure different levels of current accurately.
Function Buttons: Function buttons allow the user to select additional features and modes, such as data hold, peak hold, and auto-ranging.
To measure current with a clamp meter, the user simply opens the clamp jaw, places it around the conductor, and closes it securely. The magnetic field generated by the current induces a voltage in the clamp jaw's sensor, which is then converted into an electrical signal proportional to the current. The clamp meter displays the measured current on the digital screen.
Clamp meters are widely used in various electrical applications, including:
Troubleshooting and Maintenance: Clamp meters are invaluable for diagnosing electrical problems, such as identifying overloads, short circuits, and ground faults.
Electrical Installations: Electricians use clamp meters to verify current readings during installation, ensuring that circuits are properly wired and balanced.
HVAC Systems: Clamp meters are used to measure current in HVAC systems, such as in motors, compressors, and fan motors.
Industrial Maintenance: In industrial settings, clamp meters are used to monitor and maintain equipment, motors, and electrical systems.
Clamp meters come in various types, with some offering additional functions like true RMS measurement, temperature measurement, and Bluetooth connectivity for data logging and remote monitoring. Proper calibration and use of the clamp meter are essential for accurate and safe measurements.

Add to Cart Buy Now

Ships within 15 days

RS PRO IEK10N Clamp Meter, Max Current 300A ac II 600 V, 300 V With 1242000

By RS PRO

₹41,299  

RS PRO IEK10N Clamp Meter, Max Current 300A ac CAT II 600 V, 300 V With RS Calibration Model No 1242000 is a versatile electrical measurement tool used to measure electric currents in a conductor without the need to disconnect the circuit. It is a practical and safe instrument that allows electricians, technicians, and engineers to measure current in live circuits without the risk of exposure to high voltages.
The key components of a clamp meter include:
Clamp Jaw: The clamp meter features a hinged clamp jaw that can be opened and closed around a conductor to measure the current flowing through it. The clamp jaw is made of a magnetic material and contains a current sensor.
Digital Display: Most modern clamp meters have a digital display that shows the measured current in amps (A) or milliamps (mA). Some clamp meters may also display other electrical parameters, such as voltage, resistance, frequency, and capacitance.
Rotary Dial or Selector: The clamp meter usually has a rotary dial or a selector switch to set the range and mode of measurement. Different ranges allow the clamp meter to measure different levels of current accurately.
Function Buttons: Function buttons allow the user to select additional features and modes, such as data hold, peak hold, and auto-ranging.
To measure current with a clamp meter, the user simply opens the clamp jaw, places it around the conductor, and closes it securely. The magnetic field generated by the current induces a voltage in the clamp jaw's sensor, which is then converted into an electrical signal proportional to the current. The clamp meter displays the measured current on the digital screen.
Clamp meters are widely used in various electrical applications, including:
Troubleshooting and Maintenance: Clamp meters are invaluable for diagnosing electrical problems, such as identifying overloads, short circuits, and ground faults.
Electrical Installations: Electricians use clamp meters to verify current readings during installation, ensuring that circuits are properly wired and balanced.
HVAC Systems: Clamp meters are used to measure current in HVAC systems, such as in motors, compressors, and fan motors.
Industrial Maintenance: In industrial settings, clamp meters are used to monitor and maintain equipment, motors, and electrical systems.
Clamp meters come in various types, with some offering additional functions like true RMS measurement, temperature measurement, and Bluetooth connectivity for data logging and remote monitoring. Proper calibration and use of the clamp meter are essential for accurate and safe measurements.

Add to Cart Buy Now

Ships within 15 days

RS PRO IEK10N Clamp Meter, Max Current 300A ac CAT II 600 V, 300 V 1241958

By RS PRO

₹28,319  

RS PRO IEK10N Clamp Meter, Max Current 300A ac CAT II 600 V, 300 V Model No 1241958 is a versatile electrical measurement tool used to measure electric currents in a conductor without the need to disconnect the circuit. It is a practical and safe instrument that allows electricians, technicians, and engineers to measure current in live circuits without the risk of exposure to high voltages.
The key components of a clamp meter include:
Clamp Jaw: The clamp meter features a hinged clamp jaw that can be opened and closed around a conductor to measure the current flowing through it. The clamp jaw is made of a magnetic material and contains a current sensor.
Digital Display: Most modern clamp meters have a digital display that shows the measured current in amps (A) or milliamps (mA). Some clamp meters may also display other electrical parameters, such as voltage, resistance, frequency, and capacitance.
Rotary Dial or Selector: The clamp meter usually has a rotary dial or a selector switch to set the range and mode of measurement. Different ranges allow the clamp meter to measure different levels of current accurately.
Function Buttons: Function buttons allow the user to select additional features and modes, such as data hold, peak hold, and auto-ranging.
To measure current with a clamp meter, the user simply opens the clamp jaw, places it around the conductor, and closes it securely. The magnetic field generated by the current induces a voltage in the clamp jaw's sensor, which is then converted into an electrical signal proportional to the current. The clamp meter displays the measured current on the digital screen.
Clamp meters are widely used in various electrical applications, including:
Troubleshooting and Maintenance: Clamp meters are invaluable for diagnosing electrical problems, such as identifying overloads, short circuits, and ground faults.
Electrical Installations: Electricians use clamp meters to verify current readings during installation, ensuring that circuits are properly wired and balanced.
HVAC Systems: Clamp meters are used to measure current in HVAC systems, such as in motors, compressors, and fan motors.
Industrial Maintenance: In industrial settings, clamp meters are used to monitor and maintain equipment, motors, and electrical systems.
Clamp meters come in various types, with some offering additional functions like true RMS measurement, temperature measurement, and Bluetooth connectivity for data logging and remote monitoring. Proper calibration and use of the clamp meter are essential for accurate and safe measurements.

Add to Cart Buy Now

Ships within 15 days

RS PRO ICMA9 Clamp Meter, Max Current 400A ac CAT II 1000 V,600 V With UKAS Calibration 1241994

By RS PRO

₹50,739  

RS PRO ICMA9 Clamp Meter, Max Current 400A ac CAT II 1000 V, CAT III 600 V With UKAS Calibration Model No 1241994 is a versatile electrical measurement tool used to measure electric currents in a conductor without the need to disconnect the circuit. It is a practical and safe instrument that allows electricians, technicians, and engineers to measure current in live circuits without the risk of exposure to high voltages.
The key components of a clamp meter include:
Clamp Jaw: The clamp meter features a hinged clamp jaw that can be opened and closed around a conductor to measure the current flowing through it. The clamp jaw is made of a magnetic material and contains a current sensor.
Digital Display: Most modern clamp meters have a digital display that shows the measured current in amps (A) or milliamps (mA). Some clamp meters may also display other electrical parameters, such as voltage, resistance, frequency, and capacitance.
Rotary Dial or Selector: The clamp meter usually has a rotary dial or a selector switch to set the range and mode of measurement. Different ranges allow the clamp meter to measure different levels of current accurately.
Function Buttons: Function buttons allow the user to select additional features and modes, such as data hold, peak hold, and auto-ranging.
To measure current with a clamp meter, the user simply opens the clamp jaw, places it around the conductor, and closes it securely. The magnetic field generated by the current induces a voltage in the clamp jaw's sensor, which is then converted into an electrical signal proportional to the current. The clamp meter displays the measured current on the digital screen.
Clamp meters are widely used in various electrical applications, including:
Troubleshooting and Maintenance: Clamp meters are invaluable for diagnosing electrical problems, such as identifying overloads, short circuits, and ground faults.
Electrical Installations: Electricians use clamp meters to verify current readings during installation, ensuring that circuits are properly wired and balanced.
HVAC Systems: Clamp meters are used to measure current in HVAC systems, such as in motors, compressors, and fan motors.
Industrial Maintenance: In industrial settings, clamp meters are used to monitor and maintain equipment, motors, and electrical systems.
Clamp meters come in various types, with some offering additional functions like true RMS measurement, temperature measurement, and Bluetooth connectivity for data logging and remote monitoring. Proper calibration and use of the clamp meter are essential for accurate and safe measurements.

Add to Cart Buy Now

Ships within 15 days

RS PRO ICMA9 Clamp Meter, Max Current 400A ac II 1000 V, 600 V With 1241993

By RS PRO

₹44,839  

RS PRO ICMA9 Clamp Meter, Max Current 400A ac CAT II 1000 V, 600 V With RS Calibration Model No 1241993 is a versatile electrical measurement tool used to measure electric currents in a conductor without the need to disconnect the circuit. It is a practical and safe instrument that allows electricians, technicians, and engineers to measure current in live circuits without the risk of exposure to high voltages.
The key components of a clamp meter include:
Clamp Jaw: The clamp meter features a hinged clamp jaw that can be opened and closed around a conductor to measure the current flowing through it. The clamp jaw is made of a magnetic material and contains a current sensor.
Digital Display: Most modern clamp meters have a digital display that shows the measured current in amps (A) or milliamps (mA). Some clamp meters may also display other electrical parameters, such as voltage, resistance, frequency, and capacitance.
Rotary Dial or Selector: The clamp meter usually has a rotary dial or a selector switch to set the range and mode of measurement. Different ranges allow the clamp meter to measure different levels of current accurately.
Function Buttons: Function buttons allow the user to select additional features and modes, such as data hold, peak hold, and auto-ranging.
To measure current with a clamp meter, the user simply opens the clamp jaw, places it around the conductor, and closes it securely. The magnetic field generated by the current induces a voltage in the clamp jaw's sensor, which is then converted into an electrical signal proportional to the current. The clamp meter displays the measured current on the digital screen.
Clamp meters are widely used in various electrical applications, including:
Troubleshooting and Maintenance: Clamp meters are invaluable for diagnosing electrical problems, such as identifying overloads, short circuits, and ground faults.
Electrical Installations: Electricians use clamp meters to verify current readings during installation, ensuring that circuits are properly wired and balanced.
HVAC Systems: Clamp meters are used to measure current in HVAC systems, such as in motors, compressors, and fan motors.
Industrial Maintenance: In industrial settings, clamp meters are used to monitor and maintain equipment, motors, and electrical systems.
Clamp meters come in various types, with some offering additional functions like true RMS measurement, temperature measurement, and Bluetooth connectivity for data logging and remote monitoring. Proper calibration and use of the clamp meter are essential for accurate and safe measurements.

Add to Cart Buy Now

Ships within 15 days

RS PRO ICMA7-4 Clamp Meter, Max Current 200A ac 600 V With UKAS Calibration 1233490

By RS PRO

₹56,639  

RS PRO ICMA7-4 Clamp Meter, Max Current 200A ac 600 V With UKAS Calibration Model No 1233490 is a versatile electrical measurement tool used to measure electric currents in a conductor without the need to disconnect the circuit. It is a practical and safe instrument that allows electricians, technicians, and engineers to measure current in live circuits without the risk of exposure to high voltages.
The key components of a clamp meter include:
Clamp Jaw: The clamp meter features a hinged clamp jaw that can be opened and closed around a conductor to measure the current flowing through it. The clamp jaw is made of a magnetic material and contains a current sensor.
Digital Display: Most modern clamp meters have a digital display that shows the measured current in amps (A) or milliamps (mA). Some clamp meters may also display other electrical parameters, such as voltage, resistance, frequency, and capacitance.
Rotary Dial or Selector: The clamp meter usually has a rotary dial or a selector switch to set the range and mode of measurement. Different ranges allow the clamp meter to measure different levels of current accurately.
Function Buttons: Function buttons allow the user to select additional features and modes, such as data hold, peak hold, and auto-ranging.
To measure current with a clamp meter, the user simply opens the clamp jaw, places it around the conductor, and closes it securely. The magnetic field generated by the current induces a voltage in the clamp jaw's sensor, which is then converted into an electrical signal proportional to the current. The clamp meter displays the measured current on the digital screen.
Clamp meters are widely used in various electrical applications, including:
Troubleshooting and Maintenance: Clamp meters are invaluable for diagnosing electrical problems, such as identifying overloads, short circuits, and ground faults.
Electrical Installations: Electricians use clamp meters to verify current readings during installation, ensuring that circuits are properly wired and balanced.
HVAC Systems: Clamp meters are used to measure current in HVAC systems, such as in motors, compressors, and fan motors.
Industrial Maintenance: In industrial settings, clamp meters are used to monitor and maintain equipment, motors, and electrical systems.
Clamp meters come in various types, with some offering additional functions like true RMS measurement, temperature measurement, and Bluetooth connectivity for data logging and remote monitoring. Proper calibration and use of the clamp meter are essential for accurate and safe measurements.

Add to Cart Buy Now

Ships within 15 days

RS PRO ICMA7-4 Clamp Meter, Max Current 200A ac CAT III 600 V With RS Calibration 1233489

By RS PRO

₹50,739  

RS PRO ICMA7-4 Clamp Meter, Max Current 200A ac CAT III 600 V With RS Calibration Model No 1233489 is a versatile electrical measurement tool used to measure electric currents in a conductor without the need to disconnect the circuit. It is a practical and safe instrument that allows electricians, technicians, and engineers to measure current in live circuits without the risk of exposure to high voltages.
The key components of a clamp meter include:
Clamp Jaw: The clamp meter features a hinged clamp jaw that can be opened and closed around a conductor to measure the current flowing through it. The clamp jaw is made of a magnetic material and contains a current sensor.
Digital Display: Most modern clamp meters have a digital display that shows the measured current in amps (A) or milliamps (mA). Some clamp meters may also display other electrical parameters, such as voltage, resistance, frequency, and capacitance.
Rotary Dial or Selector: The clamp meter usually has a rotary dial or a selector switch to set the range and mode of measurement. Different ranges allow the clamp meter to measure different levels of current accurately.
Function Buttons: Function buttons allow the user to select additional features and modes, such as data hold, peak hold, and auto-ranging.
To measure current with a clamp meter, the user simply opens the clamp jaw, places it around the conductor, and closes it securely. The magnetic field generated by the current induces a voltage in the clamp jaw's sensor, which is then converted into an electrical signal proportional to the current. The clamp meter displays the measured current on the digital screen.
Clamp meters are widely used in various electrical applications, including:
Troubleshooting and Maintenance: Clamp meters are invaluable for diagnosing electrical problems, such as identifying overloads, short circuits, and ground faults.
Electrical Installations: Electricians use clamp meters to verify current readings during installation, ensuring that circuits are properly wired and balanced.
HVAC Systems: Clamp meters are used to measure current in HVAC systems, such as in motors, compressors, and fan motors.
Industrial Maintenance: In industrial settings, clamp meters are used to monitor and maintain equipment, motors, and electrical systems.
Clamp meters come in various types, with some offering additional functions like true RMS measurement, temperature measurement, and Bluetooth connectivity for data logging and remote monitoring. Proper calibration and use of the clamp meter are essential for accurate and safe measurements.

Add to Cart Buy Now

Ships within 15 days

RS PRO ICMA7-4 Clamp Meter, Max Current 200A ac CAT III 600 V Model No 1233233

By RS PRO

₹37,759  

RS PRO ICMA7-4 Clamp Meter, Max Current 200A ac CAT III 600 V Model No 1233233 is a versatile electrical measurement tool used to measure electric currents in a conductor without the need to disconnect the circuit. It is a practical and safe instrument that allows electricians, technicians, and engineers to measure current in live circuits without the risk of exposure to high voltages.
The key components of a clamp meter include:
Clamp Jaw: The clamp meter features a hinged clamp jaw that can be opened and closed around a conductor to measure the current flowing through it. The clamp jaw is made of a magnetic material and contains a current sensor.
Digital Display: Most modern clamp meters have a digital display that shows the measured current in amps (A) or milliamps (mA). Some clamp meters may also display other electrical parameters, such as voltage, resistance, frequency, and capacitance.
Rotary Dial or Selector: The clamp meter usually has a rotary dial or a selector switch to set the range and mode of measurement. Different ranges allow the clamp meter to measure different levels of current accurately.
Function Buttons: Function buttons allow the user to select additional features and modes, such as data hold, peak hold, and auto-ranging.
To measure current with a clamp meter, the user simply opens the clamp jaw, places it around the conductor, and closes it securely. The magnetic field generated by the current induces a voltage in the clamp jaw's sensor, which is then converted into an electrical signal proportional to the current. The clamp meter displays the measured current on the digital screen.
Clamp meters are widely used in various electrical applications, including:
Troubleshooting and Maintenance: Clamp meters are invaluable for diagnosing electrical problems, such as identifying overloads, short circuits, and ground faults.
Electrical Installations: Electricians use clamp meters to verify current readings during installation, ensuring that circuits are properly wired and balanced.
HVAC Systems: Clamp meters are used to measure current in HVAC systems, such as in motors, compressors, and fan motors.
Industrial Maintenance: In industrial settings, clamp meters are used to monitor and maintain equipment, motors, and electrical systems.
Clamp meters come in various types, with some offering additional functions like true RMS measurement, temperature measurement, and Bluetooth connectivity for data logging and remote monitoring. Proper calibration and use of the clamp meter are essential for accurate and safe measurements.

Add to Cart Buy Now

Ships within 15 days

RS PRO ICMA6 Clamp Meter, Max Current 600A ac CAT II 1000 V,600 V With UKAS Calibration 1233497

By RS PRO

₹64,899  

RS PRO ICMA6 Clamp Meter, Max Current 600A ac CAT II 1000 V, CAT III 600 V With UKAS Calibration Model No 1233497 is a versatile electrical measurement tool used to measure electric currents in a conductor without the need to disconnect the circuit. It is a practical and safe instrument that allows electricians, technicians, and engineers to measure current in live circuits without the risk of exposure to high voltages.
The key components of a clamp meter include:
Clamp Jaw: The clamp meter features a hinged clamp jaw that can be opened and closed around a conductor to measure the current flowing through it. The clamp jaw is made of a magnetic material and contains a current sensor.
Digital Display: Most modern clamp meters have a digital display that shows the measured current in amps (A) or milliamps (mA). Some clamp meters may also display other electrical parameters, such as voltage, resistance, frequency, and capacitance.
Rotary Dial or Selector: The clamp meter usually has a rotary dial or a selector switch to set the range and mode of measurement. Different ranges allow the clamp meter to measure different levels of current accurately.
Function Buttons: Function buttons allow the user to select additional features and modes, such as data hold, peak hold, and auto-ranging.
To measure current with a clamp meter, the user simply opens the clamp jaw, places it around the conductor, and closes it securely. The magnetic field generated by the current induces a voltage in the clamp jaw's sensor, which is then converted into an electrical signal proportional to the current. The clamp meter displays the measured current on the digital screen.
Clamp meters are widely used in various electrical applications, including:
Troubleshooting and Maintenance: Clamp meters are invaluable for diagnosing electrical problems, such as identifying overloads, short circuits, and ground faults.
Electrical Installations: Electricians use clamp meters to verify current readings during installation, ensuring that circuits are properly wired and balanced.
HVAC Systems: Clamp meters are used to measure current in HVAC systems, such as in motors, compressors, and fan motors.
Industrial Maintenance: In industrial settings, clamp meters are used to monitor and maintain equipment, motors, and electrical systems.
Clamp meters come in various types, with some offering additional functions like true RMS measurement, temperature measurement, and Bluetooth connectivity for data logging and remote monitoring. Proper calibration and use of the clamp meter are essential for accurate and safe measurements.

Add to Cart Buy Now

Ships within 15 days

RS PRO ICMA6 Clamp Meter, Max Current 600A ac II 1000 V, 600 V With 1233496

By RS PRO

₹62,539  

RS PRO ICMA6 Clamp Meter, Max Current 600A ac CAT II 1000 V, 600 V With RS Calibration Model No 1233496 is a versatile electrical measurement tool used to measure electric currents in a conductor without the need to disconnect the circuit. It is a practical and safe instrument that allows electricians, technicians, and engineers to measure current in live circuits without the risk of exposure to high voltages.
The key components of a clamp meter include:
Clamp Jaw: The clamp meter features a hinged clamp jaw that can be opened and closed around a conductor to measure the current flowing through it. The clamp jaw is made of a magnetic material and contains a current sensor.
Digital Display: Most modern clamp meters have a digital display that shows the measured current in amps (A) or milliamps (mA). Some clamp meters may also display other electrical parameters, such as voltage, resistance, frequency, and capacitance.
Rotary Dial or Selector: The clamp meter usually has a rotary dial or a selector switch to set the range and mode of measurement. Different ranges allow the clamp meter to measure different levels of current accurately.
Function Buttons: Function buttons allow the user to select additional features and modes, such as data hold, peak hold, and auto-ranging.
To measure current with a clamp meter, the user simply opens the clamp jaw, places it around the conductor, and closes it securely. The magnetic field generated by the current induces a voltage in the clamp jaw's sensor, which is then converted into an electrical signal proportional to the current. The clamp meter displays the measured current on the digital screen.
Clamp meters are widely used in various electrical applications, including:
Troubleshooting and Maintenance: Clamp meters are invaluable for diagnosing electrical problems, such as identifying overloads, short circuits, and ground faults.
Electrical Installations: Electricians use clamp meters to verify current readings during installation, ensuring that circuits are properly wired and balanced.
HVAC Systems: Clamp meters are used to measure current in HVAC systems, such as in motors, compressors, and fan motors.
Industrial Maintenance: In industrial settings, clamp meters are used to monitor and maintain equipment, motors, and electrical systems.
Clamp meters come in various types, with some offering additional functions like true RMS measurement, temperature measurement, and Bluetooth connectivity for data logging and remote monitoring. Proper calibration and use of the clamp meter are essential for accurate and safe measurements.

Add to Cart Buy Now

Ships within 15 days

RS PRO ICMA6 Clamp Meter, Max Current 600A ac CAT II 1000 V, 600 V 1233234

By RS PRO

₹20,059  

RS PRO ICMA6 Clamp Meter, Max Current 600A ac CAT II 1000 V, 600 V Model No 1233234 is a versatile electrical measurement tool used to measure electric currents in a conductor without the need to disconnect the circuit. It is a practical and safe instrument that allows electricians, technicians, and engineers to measure current in live circuits without the risk of exposure to high voltages.
The key components of a clamp meter include:
Clamp Jaw: The clamp meter features a hinged clamp jaw that can be opened and closed around a conductor to measure the current flowing through it. The clamp jaw is made of a magnetic material and contains a current sensor.
Digital Display: Most modern clamp meters have a digital display that shows the measured current in amps (A) or milliamps (mA). Some clamp meters may also display other electrical parameters, such as voltage, resistance, frequency, and capacitance.
Rotary Dial or Selector: The clamp meter usually has a rotary dial or a selector switch to set the range and mode of measurement. Different ranges allow the clamp meter to measure different levels of current accurately.
Function Buttons: Function buttons allow the user to select additional features and modes, such as data hold, peak hold, and auto-ranging.
To measure current with a clamp meter, the user simply opens the clamp jaw, places it around the conductor, and closes it securely. The magnetic field generated by the current induces a voltage in the clamp jaw's sensor, which is then converted into an electrical signal proportional to the current. The clamp meter displays the measured current on the digital screen.
Clamp meters are widely used in various electrical applications, including:
Troubleshooting and Maintenance: Clamp meters are invaluable for diagnosing electrical problems, such as identifying overloads, short circuits, and ground faults.
Electrical Installations: Electricians use clamp meters to verify current readings during installation, ensuring that circuits are properly wired and balanced.
HVAC Systems: Clamp meters are used to measure current in HVAC systems, such as in motors, compressors, and fan motors.
Industrial Maintenance: In industrial settings, clamp meters are used to monitor and maintain equipment, motors, and electrical systems.
Clamp meters come in various types, with some offering additional functions like true RMS measurement, temperature measurement, and Bluetooth connectivity for data logging and remote monitoring. Proper calibration and use of the clamp meter are essential for accurate and safe measurements.

Add to Cart Buy Now

Ships within 15 days

RS PRO ICMA5 Clamp Meter, Max Current 200A ac CAT III 1000 V, 600 V With UKAS Calibration 1233469

By RS PRO

₹61,359  

RS PRO ICMA5 Clamp Meter, Max Current 200A ac CAT III 1000 V, CAT IV 600 V With UKAS Calibration Model No 1233469 is a versatile electrical measurement tool used to measure electric currents in a conductor without the need to disconnect the circuit. It is a practical and safe instrument that allows electricians, technicians, and engineers to measure current in live circuits without the risk of exposure to high voltages.
The key components of a clamp meter include:
Clamp Jaw: The clamp meter features a hinged clamp jaw that can be opened and closed around a conductor to measure the current flowing through it. The clamp jaw is made of a magnetic material and contains a current sensor.
Digital Display: Most modern clamp meters have a digital display that shows the measured current in amps (A) or milliamps (mA). Some clamp meters may also display other electrical parameters, such as voltage, resistance, frequency, and capacitance.
Rotary Dial or Selector: The clamp meter usually has a rotary dial or a selector switch to set the range and mode of measurement. Different ranges allow the clamp meter to measure different levels of current accurately.
Function Buttons: Function buttons allow the user to select additional features and modes, such as data hold, peak hold, and auto-ranging.
To measure current with a clamp meter, the user simply opens the clamp jaw, places it around the conductor, and closes it securely. The magnetic field generated by the current induces a voltage in the clamp jaw's sensor, which is then converted into an electrical signal proportional to the current. The clamp meter displays the measured current on the digital screen.
Clamp meters are widely used in various electrical applications, including:
Troubleshooting and Maintenance: Clamp meters are invaluable for diagnosing electrical problems, such as identifying overloads, short circuits, and ground faults.
Electrical Installations: Electricians use clamp meters to verify current readings during installation, ensuring that circuits are properly wired and balanced.
HVAC Systems: Clamp meters are used to measure current in HVAC systems, such as in motors, compressors, and fan motors.
Industrial Maintenance: In industrial settings, clamp meters are used to monitor and maintain equipment, motors, and electrical systems.
Clamp meters come in various types, with some offering additional functions like true RMS measurement, temperature measurement, and Bluetooth connectivity for data logging and remote monitoring. Proper calibration and use of the clamp meter are essential for accurate and safe measurements.

Add to Cart Buy Now

Ships within 15 days

RS PRO ICMA5 Clamp Meter, Max Current 200A ac 1000 V, IV 600 V With 1233468

By RS PRO

₹57,819  

RS PRO ICMA5 Clamp Meter, Max Current 200A ac 1000 V, CAT IV 600 V With RS Calibration Model No 1233468 is a versatile electrical measurement tool used to measure electric currents in a conductor without the need to disconnect the circuit. It is a practical and safe instrument that allows electricians, technicians, and engineers to measure current in live circuits without the risk of exposure to high voltages.
The key components of a clamp meter include:
Clamp Jaw: The clamp meter features a hinged clamp jaw that can be opened and closed around a conductor to measure the current flowing through it. The clamp jaw is made of a magnetic material and contains a current sensor.
Digital Display: Most modern clamp meters have a digital display that shows the measured current in amps (A) or milliamps (mA). Some clamp meters may also display other electrical parameters, such as voltage, resistance, frequency, and capacitance.
Rotary Dial or Selector: The clamp meter usually has a rotary dial or a selector switch to set the range and mode of measurement. Different ranges allow the clamp meter to measure different levels of current accurately.
Function Buttons: Function buttons allow the user to select additional features and modes, such as data hold, peak hold, and auto-ranging.
To measure current with a clamp meter, the user simply opens the clamp jaw, places it around the conductor, and closes it securely. The magnetic field generated by the current induces a voltage in the clamp jaw's sensor, which is then converted into an electrical signal proportional to the current. The clamp meter displays the measured current on the digital screen.
Clamp meters are widely used in various electrical applications, including:
Troubleshooting and Maintenance: Clamp meters are invaluable for diagnosing electrical problems, such as identifying overloads, short circuits, and ground faults.
Electrical Installations: Electricians use clamp meters to verify current readings during installation, ensuring that circuits are properly wired and balanced.
HVAC Systems: Clamp meters are used to measure current in HVAC systems, such as in motors, compressors, and fan motors.
Industrial Maintenance: In industrial settings, clamp meters are used to monitor and maintain equipment, motors, and electrical systems.
Clamp meters come in various types, with some offering additional functions like true RMS measurement, temperature measurement, and Bluetooth connectivity for data logging and remote monitoring. Proper calibration and use of the clamp meter are essential for accurate and safe measurements.

Add to Cart Buy Now

Ships within 15 days

RS PRO ICMA5 Clamp Meter, Max Current 200A ac 1000 V, CAT IV 600 V 1233232

By RS PRO

₹41,299  

RS PRO ICMA5 Clamp Meter, Max Current 200A ac 1000 V, CAT IV 600 V Model No 1233232 is a versatile electrical measurement tool used to measure electric currents in a conductor without the need to disconnect the circuit. It is a practical and safe instrument that allows electricians, technicians, and engineers to measure current in live circuits without the risk of exposure to high voltages.
The key components of a clamp meter include:
Clamp Jaw: The clamp meter features a hinged clamp jaw that can be opened and closed around a conductor to measure the current flowing through it. The clamp jaw is made of a magnetic material and contains a current sensor.
Digital Display: Most modern clamp meters have a digital display that shows the measured current in amps (A) or milliamps (mA). Some clamp meters may also display other electrical parameters, such as voltage, resistance, frequency, and capacitance.
Rotary Dial or Selector: The clamp meter usually has a rotary dial or a selector switch to set the range and mode of measurement. Different ranges allow the clamp meter to measure different levels of current accurately.
Function Buttons: Function buttons allow the user to select additional features and modes, such as data hold, peak hold, and auto-ranging.
To measure current with a clamp meter, the user simply opens the clamp jaw, places it around the conductor, and closes it securely. The magnetic field generated by the current induces a voltage in the clamp jaw's sensor, which is then converted into an electrical signal proportional to the current. The clamp meter displays the measured current on the digital screen.
Clamp meters are widely used in various electrical applications, including:
Troubleshooting and Maintenance: Clamp meters are invaluable for diagnosing electrical problems, such as identifying overloads, short circuits, and ground faults.
Electrical Installations: Electricians use clamp meters to verify current readings during installation, ensuring that circuits are properly wired and balanced.
HVAC Systems: Clamp meters are used to measure current in HVAC systems, such as in motors, compressors, and fan motors.
Industrial Maintenance: In industrial settings, clamp meters are used to monitor and maintain equipment, motors, and electrical systems.
Clamp meters come in various types, with some offering additional functions like true RMS measurement, temperature measurement, and Bluetooth connectivity for data logging and remote monitoring. Proper calibration and use of the clamp meter are essential for accurate and safe measurements.

Add to Cart Buy Now

Ships within 15 days

RS PRO ICMA1 Clamp Meter, 300A dc, Max Current 300A ac CAT III 600 V With UKAS Calibration 1233508

By RS PRO

₹41,299  

RS PRO ICMA1 Clamp Meter, 300A dc, Max Current 300A ac CAT III 600 V With UKAS Calibration Model No 1233508 is a versatile electrical measurement tool used to measure electric currents in a conductor without the need to disconnect the circuit. It is a practical and safe instrument that allows electricians, technicians, and engineers to measure current in live circuits without the risk of exposure to high voltages.
The key components of a clamp meter include:
Clamp Jaw: The clamp meter features a hinged clamp jaw that can be opened and closed around a conductor to measure the current flowing through it. The clamp jaw is made of a magnetic material and contains a current sensor.
Digital Display: Most modern clamp meters have a digital display that shows the measured current in amps (A) or milliamps (mA). Some clamp meters may also display other electrical parameters, such as voltage, resistance, frequency, and capacitance.
Rotary Dial or Selector: The clamp meter usually has a rotary dial or a selector switch to set the range and mode of measurement. Different ranges allow the clamp meter to measure different levels of current accurately.
Function Buttons: Function buttons allow the user to select additional features and modes, such as data hold, peak hold, and auto-ranging.
To measure current with a clamp meter, the user simply opens the clamp jaw, places it around the conductor, and closes it securely. The magnetic field generated by the current induces a voltage in the clamp jaw's sensor, which is then converted into an electrical signal proportional to the current. The clamp meter displays the measured current on the digital screen.
Clamp meters are widely used in various electrical applications, including:
Troubleshooting and Maintenance: Clamp meters are invaluable for diagnosing electrical problems, such as identifying overloads, short circuits, and ground faults.
Electrical Installations: Electricians use clamp meters to verify current readings during installation, ensuring that circuits are properly wired and balanced.
HVAC Systems: Clamp meters are used to measure current in HVAC systems, such as in motors, compressors, and fan motors.
Industrial Maintenance: In industrial settings, clamp meters are used to monitor and maintain equipment, motors, and electrical systems.
Clamp meters come in various types, with some offering additional functions like true RMS measurement, temperature measurement, and Bluetooth connectivity for data logging and remote monitoring. Proper calibration and use of the clamp meter are essential for accurate and safe measurements.

Add to Cart Buy Now

Ships within 15 days

RS PRO ICMA1 Clamp Meter, 300A dc, Max Current 300A ac 600 V With 1233507

By RS PRO

₹37,759  

RS PRO ICMA1 Clamp Meter, 300A dc, Max Current 300A ac 600 V With RS Calibration Model No 1233507 is a versatile electrical measurement tool used to measure electric currents in a conductor without the need to disconnect the circuit. It is a practical and safe instrument that allows electricians, technicians, and engineers to measure current in live circuits without the risk of exposure to high voltages.
The key components of a clamp meter include:
Clamp Jaw: The clamp meter features a hinged clamp jaw that can be opened and closed around a conductor to measure the current flowing through it. The clamp jaw is made of a magnetic material and contains a current sensor.
Digital Display: Most modern clamp meters have a digital display that shows the measured current in amps (A) or milliamps (mA). Some clamp meters may also display other electrical parameters, such as voltage, resistance, frequency, and capacitance.
Rotary Dial or Selector: The clamp meter usually has a rotary dial or a selector switch to set the range and mode of measurement. Different ranges allow the clamp meter to measure different levels of current accurately.
Function Buttons: Function buttons allow the user to select additional features and modes, such as data hold, peak hold, and auto-ranging.
To measure current with a clamp meter, the user simply opens the clamp jaw, places it around the conductor, and closes it securely. The magnetic field generated by the current induces a voltage in the clamp jaw's sensor, which is then converted into an electrical signal proportional to the current. The clamp meter displays the measured current on the digital screen.
Clamp meters are widely used in various electrical applications, including:
Troubleshooting and Maintenance: Clamp meters are invaluable for diagnosing electrical problems, such as identifying overloads, short circuits, and ground faults.
Electrical Installations: Electricians use clamp meters to verify current readings during installation, ensuring that circuits are properly wired and balanced.
HVAC Systems: Clamp meters are used to measure current in HVAC systems, such as in motors, compressors, and fan motors.
Industrial Maintenance: In industrial settings, clamp meters are used to monitor and maintain equipment, motors, and electrical systems.
Clamp meters come in various types, with some offering additional functions like true RMS measurement, temperature measurement, and Bluetooth connectivity for data logging and remote monitoring. Proper calibration and use of the clamp meter are essential for accurate and safe measurements.

Add to Cart Buy Now

Ships within 15 days

RS PRO ICMA1 Clamp Meter, 300A dc, Max Current 300A ac CAT III 600 V 1233256

By RS PRO

₹23,599  

RS PRO ICMA1 Clamp Meter, 300A dc, Max Current 300A ac CAT III 600 V Model No 1233256 is a versatile electrical measurement tool used to measure electric currents in a conductor without the need to disconnect the circuit. It is a practical and safe instrument that allows electricians, technicians, and engineers to measure current in live circuits without the risk of exposure to high voltages.
The key components of a clamp meter include:
Clamp Jaw: The clamp meter features a hinged clamp jaw that can be opened and closed around a conductor to measure the current flowing through it. The clamp jaw is made of a magnetic material and contains a current sensor.
Digital Display: Most modern clamp meters have a digital display that shows the measured current in amps (A) or milliamps (mA). Some clamp meters may also display other electrical parameters, such as voltage, resistance, frequency, and capacitance.
Rotary Dial or Selector: The clamp meter usually has a rotary dial or a selector switch to set the range and mode of measurement. Different ranges allow the clamp meter to measure different levels of current accurately.
Function Buttons: Function buttons allow the user to select additional features and modes, such as data hold, peak hold, and auto-ranging.
To measure current with a clamp meter, the user simply opens the clamp jaw, places it around the conductor, and closes it securely. The magnetic field generated by the current induces a voltage in the clamp jaw's sensor, which is then converted into an electrical signal proportional to the current. The clamp meter displays the measured current on the digital screen.
Clamp meters are widely used in various electrical applications, including:
Troubleshooting and Maintenance: Clamp meters are invaluable for diagnosing electrical problems, such as identifying overloads, short circuits, and ground faults.
Electrical Installations: Electricians use clamp meters to verify current readings during installation, ensuring that circuits are properly wired and balanced.
HVAC Systems: Clamp meters are used to measure current in HVAC systems, such as in motors, compressors, and fan motors.
Industrial Maintenance: In industrial settings, clamp meters are used to monitor and maintain equipment, motors, and electrical systems.
Clamp meters come in various types, with some offering additional functions like true RMS measurement, temperature measurement, and Bluetooth connectivity for data logging and remote monitoring. Proper calibration and use of the clamp meter are essential for accurate and safe measurements.

Add to Cart Buy Now

Ships within 15 days

RS PRO ICM30R Clamp Meter, 300A dc, Max Current 300A ac CAT III 300V With UKAS Calibration 1233381

By RS PRO

₹50,739  

RS PRO ICM30R Clamp Meter, 300A dc, Max Current 300A ac CAT III 300V With UKAS Calibration Model No 1233381 is a versatile electrical measurement tool used to measure electric currents in a conductor without the need to disconnect the circuit. It is a practical and safe instrument that allows electricians, technicians, and engineers to measure current in live circuits without the risk of exposure to high voltages.
The key components of a clamp meter include:
Clamp Jaw: The clamp meter features a hinged clamp jaw that can be opened and closed around a conductor to measure the current flowing through it. The clamp jaw is made of a magnetic material and contains a current sensor.
Digital Display: Most modern clamp meters have a digital display that shows the measured current in amps (A) or milliamps (mA). Some clamp meters may also display other electrical parameters, such as voltage, resistance, frequency, and capacitance.
Rotary Dial or Selector: The clamp meter usually has a rotary dial or a selector switch to set the range and mode of measurement. Different ranges allow the clamp meter to measure different levels of current accurately.
Function Buttons: Function buttons allow the user to select additional features and modes, such as data hold, peak hold, and auto-ranging.
To measure current with a clamp meter, the user simply opens the clamp jaw, places it around the conductor, and closes it securely. The magnetic field generated by the current induces a voltage in the clamp jaw's sensor, which is then converted into an electrical signal proportional to the current. The clamp meter displays the measured current on the digital screen.
Clamp meters are widely used in various electrical applications, including:
Troubleshooting and Maintenance: Clamp meters are invaluable for diagnosing electrical problems, such as identifying overloads, short circuits, and ground faults.
Electrical Installations: Electricians use clamp meters to verify current readings during installation, ensuring that circuits are properly wired and balanced.
HVAC Systems: Clamp meters are used to measure current in HVAC systems, such as in motors, compressors, and fan motors.
Industrial Maintenance: In industrial settings, clamp meters are used to monitor and maintain equipment, motors, and electrical systems.
Clamp meters come in various types, with some offering additional functions like true RMS measurement, temperature measurement, and Bluetooth connectivity for data logging and remote monitoring. Proper calibration and use of the clamp meter are essential for accurate and safe measurements.

Add to Cart Buy Now

Ships within 15 days

RS PRO ICM30R Clamp Meter, 300A dc, Max Current 300A ac 300V With 1233380

By RS PRO

₹48,379  

RS PRO ICM30R Clamp Meter, 300A dc, Max Current 300A ac 300V With RS Calibration Model No 1233380 is a versatile electrical measurement tool used to measure electric currents in a conductor without the need to disconnect the circuit. It is a practical and safe instrument that allows electricians, technicians, and engineers to measure current in live circuits without the risk of exposure to high voltages.
The key components of a clamp meter include:
Clamp Jaw: The clamp meter features a hinged clamp jaw that can be opened and closed around a conductor to measure the current flowing through it. The clamp jaw is made of a magnetic material and contains a current sensor.
Digital Display: Most modern clamp meters have a digital display that shows the measured current in amps (A) or milliamps (mA). Some clamp meters may also display other electrical parameters, such as voltage, resistance, frequency, and capacitance.
Rotary Dial or Selector: The clamp meter usually has a rotary dial or a selector switch to set the range and mode of measurement. Different ranges allow the clamp meter to measure different levels of current accurately.
Function Buttons: Function buttons allow the user to select additional features and modes, such as data hold, peak hold, and auto-ranging.
To measure current with a clamp meter, the user simply opens the clamp jaw, places it around the conductor, and closes it securely. The magnetic field generated by the current induces a voltage in the clamp jaw's sensor, which is then converted into an electrical signal proportional to the current. The clamp meter displays the measured current on the digital screen.
Clamp meters are widely used in various electrical applications, including:
Troubleshooting and Maintenance: Clamp meters are invaluable for diagnosing electrical problems, such as identifying overloads, short circuits, and ground faults.
Electrical Installations: Electricians use clamp meters to verify current readings during installation, ensuring that circuits are properly wired and balanced.
HVAC Systems: Clamp meters are used to measure current in HVAC systems, such as in motors, compressors, and fan motors.
Industrial Maintenance: In industrial settings, clamp meters are used to monitor and maintain equipment, motors, and electrical systems.
Clamp meters come in various types, with some offering additional functions like true RMS measurement, temperature measurement, and Bluetooth connectivity for data logging and remote monitoring. Proper calibration and use of the clamp meter are essential for accurate and safe measurements.

Add to Cart Buy Now

Previous Next

Page 1 of 42 results