call
Have a question? Call us now at +91 9650660070
category menu Categories
search

Filter

Categories
Price Range
Min Price:
Max Price:
₹
-
₹
Discount
Express Shipping

Rs-Pro Threading Tools

Showing 40 out of 175 products

Sort by
RS Pro 3 Piece M8 Tap Size HSS Hand Tap Set
oos-availableShips within 24 hrs
RS Pro 3 Piece M8 Tap Size HSS Hand Tap Set
By RS PRO
Pack of 3 piece
₹2,949  
Maximum Tap Size : M8Minimum Tap Size : M8Set Type : Hand TapMaterial : HSSNumber of Pieces : 3Set Contents : Plug Tap, Second Tap, Taper Tap
Disclaimer: The above item is non-refundable. Industrybuying does not bear any responsibility for any operational concerns you may experience with the purchased item.
RS PRO HSS PG21 Thread Tap, 90 mm Length Model No 9172606
sku-leadTime Ships within 15 days
RS PRO HSS PG21 Thread Tap, 90 mm Length Model No 9172606
By RS PRO
₹6,371  
RS PRO HSS PG21 Thread Tap, 90 mm Length Model No 9172606 is a cutting tool used to create internal threads in pre-drilled holes or nuts. It is a critical tool in metalworking, manufacturing, and mechanical applications where threaded connections are required.
The thread tap typically consists of a cylindrical shank with helical flutes or cutting edges running along its length. These flutes have a specific thread profile that matches the desired thread size and pitch. Taps come in various thread sizes, including metric, Unified Thread Standard (UNC/UNF), and British Standard Pipe (BSP) threads, to suit different applications.
The process of using a thread tap involves inserting the tap into a pre-drilled hole and rotating it clockwise to cut the threads into the material. As the tap advances, the cutting edges remove material, forming the internal threads that match the external threads of a corresponding screw, bolt, or nut.
There are different types of thread taps, each serving specific purposes:
Taper Tap: Also known as the starting tap, the taper tap has a more pronounced taper at the end of the flutes. It is used to create the initial threads in a hole and helps to guide the subsequent taps. The taper design prevents the tap from binding or breaking during the threading process.
Plug Tap: The plug tap comes after the taper tap in the threading sequence. It has a shorter taper compared to the taper tap and is used for threading to a specified depth. The plug tap is suitable for through-holes and stops when it reaches the desired depth.
Bottoming Tap (Second Tap): The bottoming tap is the last tap used in the threading sequence. It has a consistent diameter along its length and a short chamfer at the starting end. This design allows it to cut threads close to the bottom of a hole, making it ideal for threading holes that have already been partially threaded by the taper and plug taps. The bottoming tap ensures that the full depth of the hole is threaded, providing a stronger connection when used with bolts or screws.
Proper lubrication is essential during the tapping process to reduce friction and heat generation, prolonging the life of the tap and ensuring accurate thread formation.
Thread taps are available in various materials, with high-speed steel (HSS) and cobalt being common choices for general-purpose tapping in metal. Carbide taps are used for more demanding applications involving harder materials.
In summary, a thread tap is a vital tool for creating internal threads in holes and nuts. Its use is prevalent in a wide range of industries, including automotive, aerospace, construction, and electronics, where secure and reliable threaded connections are necessary for assembling components and structures.
RS PRO Left Hand Thread Thread Die, M6 x 1mm Pitch, 20.63mm od Model No 6680750
sku-leadTime Ships within 15 days
RS PRO Left Hand Thread Thread Die, M6 x 1mm Pitch, 20.63mm od Model No 6680750
By RS PRO
₹1,061  
RS PRO Left Hand Thread Thread Die, M6 x 1mm Pitch, 20.63mm od Model No 6680750 is a cutting tool used in metalworking and machining processes to create external threads on cylindrical workpieces. It is an essential tool in the process of threading, which involves cutting or forming screw threads on the surface of a workpiece to facilitate the mating of threaded fasteners.
Thread dies are typically made of high-speed steel or tungsten carbide, which are durable and can withstand the cutting forces involved in the threading process. They come in various shapes and sizes to produce different thread types and pitches.
The thread die consists of a cylindrical body with cutting edges or teeth on the inside surface. These cutting edges are designed to match the profile of the desired thread. To use the thread die, it is mounted on a holder or die stock, which provides a means of turning and guiding the die over the workpiece.
During the threading process, the workpiece is secured in a lathe or held in a vise, and the thread die is applied to the surface at the desired location. As the die is rotated, the cutting edges engage with the workpiece material, gradually removing material to form the external thread.
Thread dies are available in different configurations, such as solid thread dies and adjustable thread dies. Solid thread dies have a fixed thread size and pitch and are typically used for high-volume production of threads with consistent specifications. Adjustable thread dies, on the other hand, can be adjusted to produce threads of various sizes and pitches, providing greater flexibility in threading tasks.
Thread dies are commonly used in various industries, including manufacturing, automotive, aerospace, and construction. They are instrumental in producing threaded fasteners, such as bolts, screws, and studs, which are widely used for joining components together in mechanical assemblies.
In conclusion, a thread die is a cutting tool used in metalworking to create external threads on cylindrical workpieces. It is a crucial tool in the process of threading and is commonly used in industries that require the production of threaded fasteners and components. With their durable construction and various configurations, thread dies offer a versatile and efficient solution for threading tasks, contributing to the creation of precision threads in a wide range of applications.
RS PRO HSS M3 to M12 Hand Tap Tap Set Model No 6681119
sku-leadTime Ships within 15 days
RS PRO HSS M3 to M12 Hand Tap Tap Set Model No 6681119
By RS PRO
Set of 1 piece
₹22,419  
RS PRO HSS M3 to M12 Hand Tap Tap Set Model No 6681119 is a collection of cutting tools used to create internal threads in pre-drilled holes or nuts by hand. It is an essential toolset in metalworking, mechanical, and manufacturing applications where threaded connections are required.
The hand tap set typically consists of three main types of taps: taper tap, plug tap, and bottoming tap (also known as second tap). Each tap serves a specific purpose in the threading process.
Taper Tap: The taper tap, also known as the starting tap, is the first tap used in the sequence. It has a more pronounced taper at the end of the flutes, which allows it to ease into the hole gradually. The taper tap is used to create the initial threads in a hole and helps to guide the subsequent taps. Its taper design also prevents the tap from binding or breaking during the threading process.
Plug Tap: The plug tap comes after the taper tap in the threading sequence. It has a shorter taper compared to the taper tap and is used for threading to a specified depth. The plug tap is suitable for through-holes and stops when it reaches the desired depth.
Bottoming Tap (Second Tap): The bottoming tap is the last tap used in the threading sequence. It has a consistent diameter along its length and a short chamfer at the starting end. This design allows it to cut threads close to the bottom of a hole, making it ideal for threading holes that have already been partially threaded by the taper and plug taps. The bottoming tap ensures that the full depth of the hole is threaded, providing a stronger connection when used with bolts or screws.
Hand tap sets are available in various sizes and thread pitches to accommodate a wide range of applications. They are made from high-speed steel (HSS) or other durable materials to withstand the cutting forces and maintain sharpness over extended use.
When using a hand tap set, the material must be securely held in place, and each tap is turned clockwise into the hole using a tap wrench. Proper lubrication is essential during the tapping process to reduce friction and heat generation, prolonging the tool's lifespan and ensuring accurate thread formation.
In summary, a hand tap set is a versatile and indispensable toolset for creating internal threads in holes. Its taper, plug, and bottoming taps enable a sequential and precise threading process, providing secure and reliable connections between components in various industries, such as automotive, aerospace, and construction.
Related Searches
rs pro hand taps
rs pro hss hand taps
rs pro hand taps hss
rs pro pipe taps
rs pro tap set
RS PRO HSS 4-40 Spiral Point Threading Tap 48 mm Length, 455970
sku-leadTime Ships within 15 days
RS PRO HSS 4-40 Spiral Point Threading Tap 48 mm Length, 455970
By RS PRO
₹837  
The RS PRO HSS #4-40 Spiral Point Threading Tap, 48 mm Length 455970 is a high-performance cutting tool meticulously designed for professional threading applications in metalworking and machining. Constructed from high-speed steel (HSS), this threading tap exemplifies exceptional hardness, wear resistance, and heat resilience, ensuring prolonged tool life and superior cutting performance even in the most demanding industrial environments. The spiral point design of this threading tap features a sharp and forward-facing cutting edge, enabling efficient chip evacuation during threading operations. This design reduces cutting forces and torque requirements, resulting in smoother and faster threading, particularly in through-hole applications. Precisely ground cutting flutes equipped with the threading tap facilitate precise thread formation and dimensional accuracy. The advanced spiral point geometry also ensures consistent thread quality, making it well-suited for high-precision threading tasks. The HSS material composition bestows the RS PRO HSS Spiral Point Threading Tap with excellent heat resistance, enabling it to withstand elevated cutting speeds without compromising its cutting edge. This characteristic significantly enhances productivity and reduces machining cycle times. Each RS PRO HSS Spiral Point Threading Tap undergoes rigorous quality control measures, ensuring compliance with industry standards and guaranteeing reliability and consistent performance. Its sturdy construction and ability to handle various metals, alloys, and composites make it an indispensable tool for professionals seeking precise and efficient threading solutions.
RS PRO Left Hand Thread Thread Die, M8 x 1.25mm Pitch, 33.33mm od Model No 6680769
sku-leadTime Ships within 15 days
RS PRO Left Hand Thread Thread Die, M8 x 1.25mm Pitch, 33.33mm od Model No 6680769
By RS PRO
₹1,297  
RS PRO Left Hand Thread Thread Die, M8 x 1.25mm Pitch, 33.33mm od Model No 6680769 is a cutting tool used in metalworking and machining processes to create external threads on cylindrical workpieces. It is an essential tool in the process of threading, which involves cutting or forming screw threads on the surface of a workpiece to facilitate the mating of threaded fasteners.
Thread dies are typically made of high-speed steel or tungsten carbide, which are durable and can withstand the cutting forces involved in the threading process. They come in various shapes and sizes to produce different thread types and pitches.
The thread die consists of a cylindrical body with cutting edges or teeth on the inside surface. These cutting edges are designed to match the profile of the desired thread. To use the thread die, it is mounted on a holder or die stock, which provides a means of turning and guiding the die over the workpiece.
During the threading process, the workpiece is secured in a lathe or held in a vise, and the thread die is applied to the surface at the desired location. As the die is rotated, the cutting edges engage with the workpiece material, gradually removing material to form the external thread.
Thread dies are available in different configurations, such as solid thread dies and adjustable thread dies. Solid thread dies have a fixed thread size and pitch and are typically used for high-volume production of threads with consistent specifications. Adjustable thread dies, on the other hand, can be adjusted to produce threads of various sizes and pitches, providing greater flexibility in threading tasks.
Thread dies are commonly used in various industries, including manufacturing, automotive, aerospace, and construction. They are instrumental in producing threaded fasteners, such as bolts, screws, and studs, which are widely used for joining components together in mechanical assemblies.
In conclusion, a thread die is a cutting tool used in metalworking to create external threads on cylindrical workpieces. It is a crucial tool in the process of threading and is commonly used in industries that require the production of threaded fasteners and components. With their durable construction and various configurations, thread dies offer a versatile and efficient solution for threading tasks, contributing to the creation of precision threads in a wide range of applications.
RS PRO 7 piece M16 x 2.0 Thread Repair Kit Model No 9172501
sku-leadTime Ships within 15 days
RS PRO 7 piece M16 x 2.0 Thread Repair Kit Model No 9172501
By RS PRO
₹12,979  
RS PRO HSS M12 Spiral Flute Second Threading Tap, 151993
sku-leadTime Ships within 15 days
RS PRO HSS M12 Spiral Flute Second Threading Tap, 151993
By RS PRO
₹872  
The RS PRO HSS M12 Spiral Flute, Second Threading Tap 151993 is a premium-grade cutting tool meticulously engineered for professional threading applications in metalworking and machining. Crafted from high-speed steel (HSS), this threading tap exhibits exceptional hardness, wear resistance, and heat resilience, ensuring prolonged tool life and superior cutting performance even in the most demanding industrial environments. Designed with precision and efficiency in mind, the spiral flute configuration of this threading tap allows for efficient chip evacuation, minimizing the risk of chip clogging and promoting smooth material removal during threading operations. The second threading style further enhances its versatility, making it suitable for creating threads with high accuracy and finish in through holes. The threading tap features precisely ground cutting flutes with sharp and well-defined cutting edges, facilitating precise thread formation and dimensional accuracy. The advanced spiral flute design also reduces cutting forces, minimizing the risk of tap breakage and ensuring consistent thread quality. The HSS material composition equips the RS PRO Spiral Flute, Second Threading Tap with excellent heat resistance, enabling it to withstand elevated cutting speeds without compromising its cutting edge. This characteristic significantly enhances productivity and reduces machining cycle times. Each RS PRO HSS Spiral Flute, Second Threading Tap undergoes stringent quality control measures, adhering to industry standards, and ensuring consistent performance and reliability. Its robust construction and capability to handle various metals, alloys, and composites make it a valuable tool for professionals seeking precise and efficient threading solutions. This threading tap is an essential asset for machinists, engineers, and craftsmen seeking superior thread cutting performance. With its cutting-edge features and durable performance, the RS PRO HSS Spiral Flute, Second Threading Tap stands as a top-tier choice for achieving accurate and reliable threads in the industrial environment.
RS PRO HSS M10 Hexagon Drive Tap Tap Set, 6699394 (Pack of 6 pcs)
sku-leadTime Ships within 15 days
RS PRO HSS M10 Hexagon Drive Tap Tap Set, 6699394 (Pack of 6 pcs)
By RS PRO
Pack of 6 piece
₹4,837  
The RS PRO HSS M10 Hexagon Drive Tap Tap Set 6699394 (Pack of 6 Piece) is a comprehensive and high-quality tool kit meticulously designed for professional threading applications in metalworking and machining. Crafted from high-speed steel (HSS), this set exemplifies exceptional hardness, wear resistance, and heat resilience, ensuring prolonged tool life and superior cutting performance even in the most demanding industrial environments. The set includes a range of precision ground taps in various sizes and thread pitches, offering versatility and flexibility to address a wide array of threading requirements. Each tap features sharp cutting edges and advanced flute designs, facilitating efficient chip evacuation and precise thread formation. The HSS material composition ensures durability and resistance to heat buildup during threading operations, enabling prolonged and reliable use. The RS PRO HSS Tap Set undergoes rigorous quality control measures to meet or exceed industry standards, guaranteeing reliability and consistent performance across all the taps in the set. The sturdy construction and capability to handle various metals, alloys, and composites make it an indispensable asset for professionals seeking precise and efficient threading solutions. The set is presented in a durable and organized storage case, providing convenient storage and transportation for the taps while keeping them protected and easily accessible. This feature enhances the overall usability and longevity of the tools, reducing the risk of damage or misplacement.
RS PRO HSS 8 BA Straight Flute Tap Set, 152457 (Pack of 2 pcs)
sku-leadTime Ships within 15 days
RS PRO HSS 8 BA Straight Flute Tap Set, 152457 (Pack of 2 pcs)
By RS PRO
Pack of 2 piece
₹4,129  
The RS PRO HSS #8 BA Straight Flute Tap Set 152457 (Pack of 2 Piece) is a comprehensive and high-quality tool kit specifically designed for professional threading applications in metalworking and machining. Crafted from high-speed steel (HSS), this tap set exemplifies exceptional hardness, wear resistance, and heat resilience, ensuring prolonged tool life and superior cutting performance in demanding industrial environments. The straight flute design of the taps in this set allows for efficient chip evacuation, minimizing the risk of chip clogging and promoting smooth material removal during threading operations. The precisely ground cutting flutes with sharp cutting edges facilitate precise thread formation and dimensional accuracy, ensuring consistent thread quality across various materials. The RS PRO HSS Straight Flute Tap Set includes multiple taps with varying sizes, offering versatility and flexibility to address a wide range of threading requirements. Each tap is carefully designed to meet different thread pitch standards, providing a comprehensive solution for professionals seeking precise threading capabilities. Crafted with precision engineering, the HSS material composition endows the taps in the set with excellent heat resistance, enabling them to withstand elevated cutting speeds without compromising their cutting edges. This characteristic significantly enhances productivity and reduces machining cycle times. The RS PRO HSS Straight Flute Tap Set undergoes stringent quality control measures to meet or exceed industry standards, ensuring reliability and consistent performance. The set's sturdy construction and ability to handle various metals, alloys, and composites make it an invaluable asset for professionals seeking precise and efficient threading solutions.
RS PRO HSS PG29 Thread Tap, 100 mm Length Model No 9172615
sku-leadTime Ships within 15 days
RS PRO HSS PG29 Thread Tap, 100 mm Length Model No 9172615
By RS PRO
₹11,799  
RS PRO HSS PG29 Thread Tap, 100 mm Length Model No 9172615 is a cutting tool used to create internal threads in pre-drilled holes or nuts. It is a critical tool in metalworking, manufacturing, and mechanical applications where threaded connections are required.
The thread tap typically consists of a cylindrical shank with helical flutes or cutting edges running along its length. These flutes have a specific thread profile that matches the desired thread size and pitch. Taps come in various thread sizes, including metric, Unified Thread Standard (UNC/UNF), and British Standard Pipe (BSP) threads, to suit different applications.
The process of using a thread tap involves inserting the tap into a pre-drilled hole and rotating it clockwise to cut the threads into the material. As the tap advances, the cutting edges remove material, forming the internal threads that match the external threads of a corresponding screw, bolt, or nut.
There are different types of thread taps, each serving specific purposes:
Taper Tap: Also known as the starting tap, the taper tap has a more pronounced taper at the end of the flutes. It is used to create the initial threads in a hole and helps to guide the subsequent taps. The taper design prevents the tap from binding or breaking during the threading process.
Plug Tap: The plug tap comes after the taper tap in the threading sequence. It has a shorter taper compared to the taper tap and is used for threading to a specified depth. The plug tap is suitable for through-holes and stops when it reaches the desired depth.
Bottoming Tap (Second Tap): The bottoming tap is the last tap used in the threading sequence. It has a consistent diameter along its length and a short chamfer at the starting end. This design allows it to cut threads close to the bottom of a hole, making it ideal for threading holes that have already been partially threaded by the taper and plug taps. The bottoming tap ensures that the full depth of the hole is threaded, providing a stronger connection when used with bolts or screws.
Proper lubrication is essential during the tapping process to reduce friction and heat generation, prolonging the life of the tap and ensuring accurate thread formation.
Thread taps are available in various materials, with high-speed steel (HSS) and cobalt being common choices for general-purpose tapping in metal. Carbide taps are used for more demanding applications involving harder materials.
In summary, a thread tap is a vital tool for creating internal threads in holes and nuts. Its use is prevalent in a wide range of industries, including automotive, aerospace, construction, and electronics, where secure and reliable threaded connections are necessary for assembling components and structures.
RS PRO HSS PG16-18 Straight Flute Threading Tap, 80 mm Length Model No 427953
sku-leadTime Ships within 15 days
RS PRO HSS PG16-18 Straight Flute Threading Tap, 80 mm Length Model No 427953
By RS PRO
₹4,837  
RS PRO HSS PG16-18 Straight Flute Threading Tap, 80 mm Length Model No 427953 is a cutting tool used to create internal threads in pre-drilled holes or nuts. It is an essential tool in metalworking, woodworking, and various manufacturing processes where threaded connections are required.
The tap typically consists of a cylindrical shank with helical flutes running along its length. These flutes have cutting edges that gradually taper or decrease in diameter towards the tip of the tap. There are three main types of taps: taper tap, plug tap, and second tap (also known as a bottoming tap).
The taper tap, also called the starting tap, has a more pronounced taper at the end of the flutes, allowing it to ease into the hole gradually. It is used to create the initial threads in a hole, and its tapered design helps to prevent the tap from binding or breaking.
The plug tap, on the other hand, has a shorter taper and is used for threading to a specified depth. It is suitable for through-holes and stops when it reaches the desired depth.
The second tap, as mentioned earlier, is also called the bottoming tap. It has a consistent diameter along its length, with a short chamfer at the starting end. This design allows it to cut threads close to the bottom of a hole, making it ideal for threading holes that have already been partially threaded by the taper tap.
When using a threading tap, the material must be securely held in place, and the tap is rotated clockwise into the hole. The cutting edges of the flutes remove material, forming the internal threads that match the external threads of a corresponding screw, bolt, or nut.
Threading taps come in various sizes and thread pitches to accommodate a wide range of applications. They are made from high-speed steel (HSS) or carbide to withstand the cutting forces and maintain their sharpness over prolonged use.
Proper lubrication is essential during the tapping process to reduce friction and heat generation, improving the tool's lifespan and ensuring accurate thread formation.
In summary, threading taps are indispensable tools for creating internal threads in holes, enabling secure and reliable connections between various components in industries ranging from manufacturing and construction to automotive and electronics.
RS PRO HSS M2.5 Straight Flute, Second Threading Tap Model No 152564
sku-leadTime Ships within 15 days
RS PRO HSS M2.5 Straight Flute, Second Threading Tap Model No 152564
By RS PRO
₹789  
RS PRO HSS M2.5 Straight Flute, Second Threading Tap Model No 152564 is a cutting tool used to create internal threads in pre-drilled holes or nuts. It is an essential tool in metalworking, woodworking, and various manufacturing processes where threaded connections are required.
The tap typically consists of a cylindrical shank with helical flutes running along its length. These flutes have cutting edges that gradually taper or decrease in diameter towards the tip of the tap. There are three main types of taps: taper tap, plug tap, and second tap (also known as a bottoming tap).
The taper tap, also called the starting tap, has a more pronounced taper at the end of the flutes, allowing it to ease into the hole gradually. It is used to create the initial threads in a hole, and its tapered design helps to prevent the tap from binding or breaking.
The plug tap, on the other hand, has a shorter taper and is used for threading to a specified depth. It is suitable for through-holes and stops when it reaches the desired depth.
The second tap, as mentioned earlier, is also called the bottoming tap. It has a consistent diameter along its length, with a short chamfer at the starting end. This design allows it to cut threads close to the bottom of a hole, making it ideal for threading holes that have already been partially threaded by the taper tap.
When using a threading tap, the material must be securely held in place, and the tap is rotated clockwise into the hole. The cutting edges of the flutes remove material, forming the internal threads that match the external threads of a corresponding screw, bolt, or nut.
Threading taps come in various sizes and thread pitches to accommodate a wide range of applications. They are made from high-speed steel (HSS) or carbide to withstand the cutting forces and maintain their sharpness over prolonged use.
Proper lubrication is essential during the tapping process to reduce friction and heat generation, improving the tool's lifespan and ensuring accurate thread formation.
In summary, threading taps are indispensable tools for creating internal threads in holes, enabling secure and reliable connections between various components in industries ranging from manufacturing and construction to automotive and electronics.
RS Pro 20 mm, 25 mm Dia HSS Round Dies
sku-leadTime Ships within 15 days
RS Pro 20 mm, 25 mm Dia HSS Round Dies
By RS PRO
₹21,239  
Professional quality conduits, stock & dies for the repair and creation of uniform threads.Overall Length : 417 mmDie Diameter : 20 mm, 25 mmMaterial : HSS
Disclaimer: The above item is non-refundable. Industrybuying does not bear any responsibility for any operational concerns you may experience with the purchased item.
RS PRO HSS M10 Straight Flute Second Threading Tap, 152097
sku-leadTime Ships within 15 days
RS PRO HSS M10 Straight Flute Second Threading Tap, 152097
By RS PRO
₹1,415  
The RS PRO HSS M10 Straight Flute, Second Threading Tap 152097 is a premium-grade cutting tool meticulously engineered for professional threading applications in metalworking and machining. Crafted from high-speed steel (HSS), this threading tap exhibits exceptional hardness, wear resistance, and heat resilience, ensuring prolonged tool life and superior cutting performance even in the most demanding industrial environments. Designed with precision and efficiency in mind, the spiral flute configuration of this threading tap allows for efficient chip evacuation, minimizing the risk of chip clogging and promoting smooth material removal during threading operations. The second threading style further enhances its versatility, making it suitable for creating threads with high accuracy and finish in through holes. The threading tap features precisely ground cutting flutes with sharp and well-defined cutting edges, facilitating precise thread formation and dimensional accuracy. The advanced spiral flute design also reduces cutting forces, minimizing the risk of tap breakage and ensuring consistent thread quality. The HSS material composition equips the RS PRO Spiral Flute, Second Threading Tap with excellent heat resistance, enabling it to withstand elevated cutting speeds without compromising its cutting edge. This characteristic significantly enhances productivity and reduces machining cycle times. Each RS PRO HSS Spiral Flute, Second Threading Tap undergoes stringent quality control measures, adhering to industry standards, and ensuring consistent performance and reliability. Its robust construction and capability to handle various metals, alloys, and composites make it a valuable tool for professionals seeking precise and efficient threading solutions. This threading tap is an essential asset for machinists, engineers, and craftsmen seeking superior thread cutting performance. With its cutting-edge features and durable performance, the RS PRO HSS Spiral Flute, Second Threading Tap stands as a top-tier choice for achieving accurate and reliable threads in the industrial environment.
RS PRO HSS 5/16-18 Spiral Point Threading Tap 72 mm Length, 455914
sku-leadTime Ships within 15 days
RS PRO HSS 5/16-18 Spiral Point Threading Tap 72 mm Length, 455914
By RS PRO
₹837  
The RS PRO HSS 5/16-18 Spiral Point Threading Tap, 72 mm Length 455914 is a high-performance cutting tool meticulously designed for professional threading applications in metalworking and machining. Constructed from high-speed steel (HSS), this threading tap exemplifies exceptional hardness, wear resistance, and heat resilience, ensuring prolonged tool life and superior cutting performance even in the most demanding industrial environments. The spiral point design of this threading tap features a sharp and forward-facing cutting edge, enabling efficient chip evacuation during threading operations. This design reduces cutting forces and torque requirements, resulting in smoother and faster threading, particularly in through-hole applications. Precisely ground cutting flutes equipped with the threading tap facilitate precise thread formation and dimensional accuracy. The advanced spiral point geometry also ensures consistent thread quality, making it well-suited for high-precision threading tasks. The HSS material composition bestows the RS PRO HSS Spiral Point Threading Tap with excellent heat resistance, enabling it to withstand elevated cutting speeds without compromising its cutting edge. This characteristic significantly enhances productivity and reduces machining cycle times. Each RS PRO HSS Spiral Point Threading Tap undergoes rigorous quality control measures, ensuring compliance with industry standards and guaranteeing reliability and consistent performance. Its sturdy construction and ability to handle various metals, alloys, and composites make it an indispensable tool for professionals seeking precise and efficient threading solutions.
RS PRO HSS 1/4 UNC Spiral Point Threading Tap 66 mm Length, 455968
sku-leadTime Ships within 15 days
RS PRO HSS 1/4 UNC Spiral Point Threading Tap 66 mm Length, 455968
By RS PRO
₹660  
The RS PRO HSS 1/4 UNC Spiral Point Threading Tap, 66 mm Length 455968 is a high-performance cutting tool meticulously designed for professional threading applications in metalworking and machining. Constructed from high-speed steel (HSS), this threading tap exemplifies exceptional hardness, wear resistance, and heat resilience, ensuring prolonged tool life and superior cutting performance even in the most demanding industrial environments. The spiral point design of this threading tap features a sharp and forward-facing cutting edge, enabling efficient chip evacuation during threading operations. This design reduces cutting forces and torque requirements, resulting in smoother and faster threading, particularly in through-hole applications. Precisely ground cutting flutes equipped with the threading tap facilitate precise thread formation and dimensional accuracy. The advanced spiral point geometry also ensures consistent thread quality, making it well-suited for high-precision threading tasks. The HSS material composition bestows the RS PRO HSS Spiral Point Threading Tap with excellent heat resistance, enabling it to withstand elevated cutting speeds without compromising its cutting edge. This characteristic significantly enhances productivity and reduces machining cycle times. Each RS PRO HSS Spiral Point Threading Tap undergoes rigorous quality control measures, ensuring compliance with industry standards and guaranteeing reliability and consistent performance. Its sturdy construction and ability to handle various metals, alloys, and composites make it an indispensable tool for professionals seeking precise and efficient threading solutions.
RS PRO HSS M12 Spiral Point Tap Set, 427963 (Pack of 7 pcs)
sku-leadTime Ships within 15 days
RS PRO HSS M12 Spiral Point Tap Set, 427963 (Pack of 7 pcs)
By RS PRO
Pack of 7 piece
₹6,371  
The RS PRO HSS M12 Spiral Point Tap Set 427963 (Pack of 7 Piece) is a comprehensive and high-quality tool kit meticulously designed for professional threading applications in metalworking and machining. Crafted from high-speed steel (HSS), this set exemplifies exceptional hardness, wear resistance, and heat resilience, ensuring prolonged tool life and superior cutting performance even in the most demanding industrial environments. The set includes a range of precision ground taps in various sizes and thread pitches, offering versatility and flexibility to address a wide array of threading requirements. Each tap features sharp cutting edges and advanced flute designs, facilitating efficient chip evacuation and precise thread formation. The HSS material composition ensures durability and resistance to heat buildup during threading operations, enabling prolonged and reliable use. The RS PRO HSS Tap Set undergoes rigorous quality control measures to meet or exceed industry standards, guaranteeing reliability and consistent performance across all the taps in the set. The sturdy construction and capability to handle various metals, alloys, and composites make it an indispensable asset for professionals seeking precise and efficient threading solutions. The set is presented in a durable and organized storage case, providing convenient storage and transportation for the taps while keeping them protected and easily accessible. This feature enhances the overall usability and longevity of the tools, reducing the risk of damage or misplacement.
RS PRO HSS 1/2 BSPF Straight Flute Tap Set, 152378 (Pack of 2 pcs)
sku-leadTime Ships within 15 days
RS PRO HSS 1/2 BSPF Straight Flute Tap Set, 152378 (Pack of 2 pcs)
By RS PRO
Pack of 2 piece
₹5,545  
The RS PRO HSS 1/2 BSPF Straight Flute Tap Set 152378 (Pack of 2 Piece) is a comprehensive and high-quality tool kit specifically designed for professional threading applications in metalworking and machining. Crafted from high-speed steel (HSS), this tap set exemplifies exceptional hardness, wear resistance, and heat resilience, ensuring prolonged tool life and superior cutting performance in demanding industrial environments. The straight flute design of the taps in this set allows for efficient chip evacuation, minimizing the risk of chip clogging and promoting smooth material removal during threading operations. The precisely ground cutting flutes with sharp cutting edges facilitate precise thread formation and dimensional accuracy, ensuring consistent thread quality across various materials. The RS PRO HSS Straight Flute Tap Set includes multiple taps with varying sizes, offering versatility and flexibility to address a wide range of threading requirements. Each tap is carefully designed to meet different thread pitch standards, providing a comprehensive solution for professionals seeking precise threading capabilities. Crafted with precision engineering, the HSS material composition endows the taps in the set with excellent heat resistance, enabling them to withstand elevated cutting speeds without compromising their cutting edges. This characteristic significantly enhances productivity and reduces machining cycle times. The RS PRO HSS Straight Flute Tap Set undergoes stringent quality control measures to meet or exceed industry standards, ensuring reliability and consistent performance. The set's sturdy construction and ability to handle various metals, alloys, and composites make it an invaluable asset for professionals seeking precise and efficient threading solutions.
RS PRO HSS M20 Second, Straight Flute Threading Tap, 112 mm Length Model No 5227654
sku-leadTime Ships within 15 days
RS PRO HSS M20 Second, Straight Flute Threading Tap, 112 mm Length Model No 5227654
By RS PRO
₹6,961  
RS PRO HSS M20 Second, Straight Flute Threading Tap, 112 mm Length Model No 5227654 is a cutting tool used to create internal threads in pre-drilled holes or nuts. It is an essential tool in metalworking, woodworking, and various manufacturing processes where threaded connections are required.
The tap typically consists of a cylindrical shank with helical flutes running along its length. These flutes have cutting edges that gradually taper or decrease in diameter towards the tip of the tap. There are three main types of taps: taper tap, plug tap, and second tap (also known as a bottoming tap).
The taper tap, also called the starting tap, has a more pronounced taper at the end of the flutes, allowing it to ease into the hole gradually. It is used to create the initial threads in a hole, and its tapered design helps to prevent the tap from binding or breaking.
The plug tap, on the other hand, has a shorter taper and is used for threading to a specified depth. It is suitable for through-holes and stops when it reaches the desired depth.
The second tap, as mentioned earlier, is also called the bottoming tap. It has a consistent diameter along its length, with a short chamfer at the starting end. This design allows it to cut threads close to the bottom of a hole, making it ideal for threading holes that have already been partially threaded by the taper tap.
When using a threading tap, the material must be securely held in place, and the tap is rotated clockwise into the hole. The cutting edges of the flutes remove material, forming the internal threads that match the external threads of a corresponding screw, bolt, or nut.
Threading taps come in various sizes and thread pitches to accommodate a wide range of applications. They are made from high-speed steel (HSS) or carbide to withstand the cutting forces and maintain their sharpness over prolonged use.
Proper lubrication is essential during the tapping process to reduce friction and heat generation, improving the tool's lifespan and ensuring accurate thread formation.
In summary, threading taps are indispensable tools for creating internal threads in holes, enabling secure and reliable connections between various components in industries ranging from manufacturing and construction to automotive and electronics.
RS PRO HSS M2 Straight Flute, Plug Threading Tap Model No 152120
sku-leadTime Ships within 15 days
RS PRO HSS M2 Straight Flute, Plug Threading Tap Model No 152120
By RS PRO
₹778  
RS PRO HSS M2 Straight Flute, Plug Threading Tap Model No 152120 is a cutting tool used to create internal threads in pre-drilled holes or nuts. It is an essential tool in metalworking, woodworking, and various manufacturing processes where threaded connections are required.
The tap typically consists of a cylindrical shank with helical flutes running along its length. These flutes have cutting edges that gradually taper or decrease in diameter towards the tip of the tap. There are three main types of taps: taper tap, plug tap, and second tap (also known as a bottoming tap).
The taper tap, also called the starting tap, has a more pronounced taper at the end of the flutes, allowing it to ease into the hole gradually. It is used to create the initial threads in a hole, and its tapered design helps to prevent the tap from binding or breaking.
The plug tap, on the other hand, has a shorter taper and is used for threading to a specified depth. It is suitable for through-holes and stops when it reaches the desired depth.
The second tap, as mentioned earlier, is also called the bottoming tap. It has a consistent diameter along its length, with a short chamfer at the starting end. This design allows it to cut threads close to the bottom of a hole, making it ideal for threading holes that have already been partially threaded by the taper tap.
When using a threading tap, the material must be securely held in place, and the tap is rotated clockwise into the hole. The cutting edges of the flutes remove material, forming the internal threads that match the external threads of a corresponding screw, bolt, or nut.
Threading taps come in various sizes and thread pitches to accommodate a wide range of applications. They are made from high-speed steel (HSS) or carbide to withstand the cutting forces and maintain their sharpness over prolonged use.
Proper lubrication is essential during the tapping process to reduce friction and heat generation, improving the tool's lifespan and ensuring accurate thread formation.
In summary, threading taps are indispensable tools for creating internal threads in holes, enabling secure and reliable connections between various components in industries ranging from manufacturing and construction to automotive and electronics.
RS PRO HSS PG11-18 Straight Flute Threading Tap, 80 mm Length Model No 427947
sku-leadTime Ships within 15 days
RS PRO HSS PG11-18 Straight Flute Threading Tap, 80 mm Length Model No 427947
By RS PRO
₹5,073  
RS PRO HSS PG11-18 Straight Flute Threading Tap, 80 mm Length Model No 427947 is a cutting tool used to create internal threads in pre-drilled holes or nuts. It is an essential tool in metalworking, woodworking, and various manufacturing processes where threaded connections are required.
The tap typically consists of a cylindrical shank with helical flutes running along its length. These flutes have cutting edges that gradually taper or decrease in diameter towards the tip of the tap. There are three main types of taps: taper tap, plug tap, and second tap (also known as a bottoming tap).
The taper tap, also called the starting tap, has a more pronounced taper at the end of the flutes, allowing it to ease into the hole gradually. It is used to create the initial threads in a hole, and its tapered design helps to prevent the tap from binding or breaking.
The plug tap, on the other hand, has a shorter taper and is used for threading to a specified depth. It is suitable for through-holes and stops when it reaches the desired depth.
The second tap, as mentioned earlier, is also called the bottoming tap. It has a consistent diameter along its length, with a short chamfer at the starting end. This design allows it to cut threads close to the bottom of a hole, making it ideal for threading holes that have already been partially threaded by the taper tap.
When using a threading tap, the material must be securely held in place, and the tap is rotated clockwise into the hole. The cutting edges of the flutes remove material, forming the internal threads that match the external threads of a corresponding screw, bolt, or nut.
Threading taps come in various sizes and thread pitches to accommodate a wide range of applications. They are made from high-speed steel (HSS) or carbide to withstand the cutting forces and maintain their sharpness over prolonged use.
Proper lubrication is essential during the tapping process to reduce friction and heat generation, improving the tool's lifespan and ensuring accurate thread formation.
In summary, threading taps are indispensable tools for creating internal threads in holes, enabling secure and reliable connections between various components in industries ranging from manufacturing and construction to automotive and electronics.
RS PRO HSS M4 Straight Flute, Plug Threading Tap Model No 152299
sku-leadTime Ships within 15 days
RS PRO HSS M4 Straight Flute, Plug Threading Tap Model No 152299
By RS PRO
₹612  
RS PRO HSS M4 Straight Flute, Plug Threading Tap Model No 152299 is a cutting tool used to create internal threads in pre-drilled holes or nuts. It is an essential tool in metalworking, woodworking, and various manufacturing processes where threaded connections are required.
The tap typically consists of a cylindrical shank with helical flutes running along its length. These flutes have cutting edges that gradually taper or decrease in diameter towards the tip of the tap. There are three main types of taps: taper tap, plug tap, and second tap (also known as a bottoming tap).
The taper tap, also called the starting tap, has a more pronounced taper at the end of the flutes, allowing it to ease into the hole gradually. It is used to create the initial threads in a hole, and its tapered design helps to prevent the tap from binding or breaking.
The plug tap, on the other hand, has a shorter taper and is used for threading to a specified depth. It is suitable for through-holes and stops when it reaches the desired depth.
The second tap, as mentioned earlier, is also called the bottoming tap. It has a consistent diameter along its length, with a short chamfer at the starting end. This design allows it to cut threads close to the bottom of a hole, making it ideal for threading holes that have already been partially threaded by the taper tap.
When using a threading tap, the material must be securely held in place, and the tap is rotated clockwise into the hole. The cutting edges of the flutes remove material, forming the internal threads that match the external threads of a corresponding screw, bolt, or nut.
Threading taps come in various sizes and thread pitches to accommodate a wide range of applications. They are made from high-speed steel (HSS) or carbide to withstand the cutting forces and maintain their sharpness over prolonged use.
Proper lubrication is essential during the tapping process to reduce friction and heat generation, improving the tool's lifespan and ensuring accurate thread formation.
In summary, threading taps are indispensable tools for creating internal threads in holes, enabling secure and reliable connections between various components in industries ranging from manufacturing and construction to automotive and electronics.
RS PRO HSS M3 Straight Flute, Plug Threading Tap Model No 152069
sku-leadTime Ships within 15 days
RS PRO HSS M3 Straight Flute, Plug Threading Tap Model No 152069
By RS PRO
₹719  
RS PRO HSS M3 Straight Flute, Plug Threading Tap Model No 152069 is a cutting tool used to create internal threads in pre-drilled holes or nuts. It is an essential tool in metalworking, woodworking, and various manufacturing processes where threaded connections are required.
The tap typically consists of a cylindrical shank with helical flutes running along its length. These flutes have cutting edges that gradually taper or decrease in diameter towards the tip of the tap. There are three main types of taps: taper tap, plug tap, and second tap (also known as a bottoming tap).
The taper tap, also called the starting tap, has a more pronounced taper at the end of the flutes, allowing it to ease into the hole gradually. It is used to create the initial threads in a hole, and its tapered design helps to prevent the tap from binding or breaking.
The plug tap, on the other hand, has a shorter taper and is used for threading to a specified depth. It is suitable for through-holes and stops when it reaches the desired depth.
The second tap, as mentioned earlier, is also called the bottoming tap. It has a consistent diameter along its length, with a short chamfer at the starting end. This design allows it to cut threads close to the bottom of a hole, making it ideal for threading holes that have already been partially threaded by the taper tap.
When using a threading tap, the material must be securely held in place, and the tap is rotated clockwise into the hole. The cutting edges of the flutes remove material, forming the internal threads that match the external threads of a corresponding screw, bolt, or nut.
Threading taps come in various sizes and thread pitches to accommodate a wide range of applications. They are made from high-speed steel (HSS) or carbide to withstand the cutting forces and maintain their sharpness over prolonged use.
Proper lubrication is essential during the tapping process to reduce friction and heat generation, improving the tool's lifespan and ensuring accurate thread formation.
In summary, threading taps are indispensable tools for creating internal threads in holes, enabling secure and reliable connections between various components in industries ranging from manufacturing and construction to automotive and electronics.
RS PRO HSS M20 Straight Flute, Taper Threading Tap Model No 152255
sku-leadTime Ships within 15 days
RS PRO HSS M20 Straight Flute, Taper Threading Tap Model No 152255
By RS PRO
₹1,887  
RS PRO HSS M20 Straight Flute, Taper Threading Tap Model No 152255 is a cutting tool used to create internal threads in pre-drilled holes or nuts. It is an essential tool in metalworking, woodworking, and various manufacturing processes where threaded connections are required.
The tap typically consists of a cylindrical shank with helical flutes running along its length. These flutes have cutting edges that gradually taper or decrease in diameter towards the tip of the tap. There are three main types of taps: taper tap, plug tap, and second tap (also known as a bottoming tap).
The taper tap, also called the starting tap, has a more pronounced taper at the end of the flutes, allowing it to ease into the hole gradually. It is used to create the initial threads in a hole, and its tapered design helps to prevent the tap from binding or breaking.
The plug tap, on the other hand, has a shorter taper and is used for threading to a specified depth. It is suitable for through-holes and stops when it reaches the desired depth.
The second tap, as mentioned earlier, is also called the bottoming tap. It has a consistent diameter along its length, with a short chamfer at the starting end. This design allows it to cut threads close to the bottom of a hole, making it ideal for threading holes that have already been partially threaded by the taper tap.
When using a threading tap, the material must be securely held in place, and the tap is rotated clockwise into the hole. The cutting edges of the flutes remove material, forming the internal threads that match the external threads of a corresponding screw, bolt, or nut.
Threading taps come in various sizes and thread pitches to accommodate a wide range of applications. They are made from high-speed steel (HSS) or carbide to withstand the cutting forces and maintain their sharpness over prolonged use.
Proper lubrication is essential during the tapping process to reduce friction and heat generation, improving the tool's lifespan and ensuring accurate thread formation.
In summary, threading taps are indispensable tools for creating internal threads in holes, enabling secure and reliable connections between various components in industries ranging from manufacturing and construction to automotive and electronics.
RS PRO M4 HSS Rethreader Model No 456923
sku-leadTime Ships within 15 days
RS PRO M4 HSS Rethreader Model No 456923
By RS PRO
₹671  
RS PRO M4 HSS Rethreader Model No 456923 is a specialized tool used to repair damaged or worn-out threads on bolts, screws, studs, or other threaded components. Threads can become damaged due to wear, cross-threading, or other factors, leading to problems with assembly and disassembly or compromising the strength and integrity of the fastened joint. Rethreaders are designed to restore the damaged threads, extending the lifespan and usability of the threaded part.
There are two main types of rethreaders: internal and external. An internal rethreader is used to repair damaged threads inside a hole or threaded bore, while an external rethreader is used to repair threads on the outside of a cylindrical object, such as a bolt or stud.
The rethreader typically consists of a series of cutting teeth or flutes that match the pitch and profile of the original threads. The user applies the rethreader to the damaged area and turns it in the same direction as the original thread, gradually removing the damaged material and recreating the proper thread profile. Some rethreaders may have adjustable or replaceable cutting blades to accommodate different thread sizes or pitches.
Rethreaders come in various styles and sizes to match different thread standards, such as metric, UNC (Unified National Coarse), UNF (Unified National Fine), and others. Some rethreaders are designed for specific industries or applications, such as automotive rethreaders for repairing spark plug threads or pipe thread rethreaders for plumbing repairs.
Using a rethreader is a cost-effective alternative to replacing the entire threaded component, especially for critical or hard-to-replace parts. It is essential to use the correct size and type of rethreader to avoid further damaging the threads or creating mismatched threads that could lead to more significant issues.
In summary, a rethreather is a valuable tool for repairing damaged threads on bolts, screws, studs, or other threaded components. By restoring the original thread profile, it allows for smooth assembly and disassembly, prolonging the life of the threaded part and avoiding the need for expensive replacements. Proper selection and use of the rethreader are crucial to ensure successful thread repair and maintain the integrity of the fastened joint.
RS PRO M3.5 High Speed Steel Rethreader Model No 1253090
sku-leadTime Ships within 15 days
RS PRO M3.5 High Speed Steel Rethreader Model No 1253090
By RS PRO
₹1,769  
RS PRO M3.5 High Speed Steel Rethreader Model No 1253090 is a specialized tool used to repair damaged or worn-out threads on bolts, screws, studs, or other threaded components. Threads can become damaged due to wear, cross-threading, or other factors, leading to problems with assembly and disassembly or compromising the strength and integrity of the fastened joint. Rethreaders are designed to restore the damaged threads, extending the lifespan and usability of the threaded part.
There are two main types of rethreaders: internal and external. An internal rethreader is used to repair damaged threads inside a hole or threaded bore, while an external rethreader is used to repair threads on the outside of a cylindrical object, such as a bolt or stud.
The rethreader typically consists of a series of cutting teeth or flutes that match the pitch and profile of the original threads. The user applies the rethreader to the damaged area and turns it in the same direction as the original thread, gradually removing the damaged material and recreating the proper thread profile. Some rethreaders may have adjustable or replaceable cutting blades to accommodate different thread sizes or pitches.
Rethreaders come in various styles and sizes to match different thread standards, such as metric, UNC (Unified National Coarse), UNF (Unified National Fine), and others. Some rethreaders are designed for specific industries or applications, such as automotive rethreaders for repairing spark plug threads or pipe thread rethreaders for plumbing repairs.
Using a rethreader is a cost-effective alternative to replacing the entire threaded component, especially for critical or hard-to-replace parts. It is essential to use the correct size and type of rethreader to avoid further damaging the threads or creating mismatched threads that could lead to more significant issues.
In summary, a rethreather is a valuable tool for repairing damaged threads on bolts, screws, studs, or other threaded components. By restoring the original thread profile, it allows for smooth assembly and disassembly, prolonging the life of the threaded part and avoiding the need for expensive replacements. Proper selection and use of the rethreader are crucial to ensure successful thread repair and maintain the integrity of the fastened joint.
RS PRO Black Polyester Tool Roll, 580 mm x 380 mm Model No 7077274
sku-leadTime Ships within 15 days
RS PRO Black Polyester Tool Roll, 580 mm x 380 mm Model No 7077274
By RS PRO
₹2,241  
The RS PRO Black Polyester Tool Roll, 580 mm x 380 mm Model No 7077274, Tool Roll, a practical and organized solution for storing and carrying your essential tools. Meticulously designed with precision and durability in mind, this tool roll offers a seamless combination of efficiency and convenience, making it an indispensable accessory for both professionals and DIY enthusiasts. The Tool Roll features a compact and portable design, typically made from high-quality materials such as canvas or durable fabric. These materials ensure the tool roll can withstand the rigors of daily use, providing reliable protection for your tools while on the go. The primary function of the Tool Roll is to keep your tools organized and easily accessible. It consists of a series of pockets or compartments that securely hold various tools, preventing them from clattering together and reducing the risk of damage or loss. The tool roll's roll-up design allows for easy storage and transport. Once your tools are in place, simply roll up the tool roll and fasten it with straps or buckles, creating a compact and tidy package that fits neatly in your toolbox, backpack, or car. The Tool Roll is available in various sizes and configurations, catering to different tool sets and requirements. Whether you need a small tool roll for a few essentials or a larger one to accommodate an extensive toolkit, there is a suitable option for every need. With its efficient organization and portability, the Tool Roll is an excellent solution for professionals who need to carry their tools to different job sites or for DIY enthusiasts working on projects at home or on the go. Beyond tools, the Tool Roll finds utility in various other applications. It can also be used to organize and carry art supplies, crafting materials, or any other items that require a neat and secure storage solution. In conclusion, the Tool Roll is an essential accessory that provides efficient organization and easy portability for your essential tools. Its durable materials, compact design, and versatile configurations make it a must-have for professionals and hobbyists alike. Invest in the Tool Roll to experience the convenience and efficiency of a well-organized toolkit, ensuring that your tools are always within reach and in perfect condition. Trust in the reliability of this tool roll to be your go-to accessory for keeping your tools safe, organized, and ready for any task, whether on the job site or in your workshop.
RS PRO Black Nylon Tool Roll, 380 mm x 200 mm Model No 7077278
sku-leadTime Ships within 15 days
RS PRO Black Nylon Tool Roll, 380 mm x 200 mm Model No 7077278
By RS PRO
₹1,002  
The RS PRO Black Nylon Tool Roll, 380 mm x 200 mm Model No 7077278, Tool Roll, a practical and organized solution for storing and carrying your essential tools. Meticulously designed with precision and durability in mind, this tool roll offers a seamless combination of efficiency and convenience, making it an indispensable accessory for both professionals and DIY enthusiasts. The Tool Roll features a compact and portable design, typically made from high-quality materials such as canvas or durable fabric. These materials ensure the tool roll can withstand the rigors of daily use, providing reliable protection for your tools while on the go. The primary function of the Tool Roll is to keep your tools organized and easily accessible. It consists of a series of pockets or compartments that securely hold various tools, preventing them from clattering together and reducing the risk of damage or loss. The tool roll's roll-up design allows for easy storage and transport. Once your tools are in place, simply roll up the tool roll and fasten it with straps or buckles, creating a compact and tidy package that fits neatly in your toolbox, backpack, or car. The Tool Roll is available in various sizes and configurations, catering to different tool sets and requirements. Whether you need a small tool roll for a few essentials or a larger one to accommodate an extensive toolkit, there is a suitable option for every need. With its efficient organization and portability, the Tool Roll is an excellent solution for professionals who need to carry their tools to different job sites or for DIY enthusiasts working on projects at home or on the go. Beyond tools, the Tool Roll finds utility in various other applications. It can also be used to organize and carry art supplies, crafting materials, or any other items that require a neat and secure storage solution. In conclusion, the Tool Roll is an essential accessory that provides efficient organization and easy portability for your essential tools. Its durable materials, compact design, and versatile configurations make it a must-have for professionals and hobbyists alike. Invest in the Tool Roll to experience the convenience and efficiency of a well-organized toolkit, ensuring that your tools are always within reach and in perfect condition. Trust in the reliability of this tool roll to be your go-to accessory for keeping your tools safe, organized, and ready for any task, whether on the job site or in your workshop.
RS PRO Black, Red Polyester Tool Roll, 580 mm x 510 mm Model No 7077287
sku-leadTime Ships within 15 days
RS PRO Black, Red Polyester Tool Roll, 580 mm x 510 mm Model No 7077287
By RS PRO
₹6,135  
The RS PRO Black, Red Polyester Tool Roll, 580 mm x 510 mm Model No 7077287, Tool Roll, a practical and organized solution for storing and carrying your essential tools. Meticulously designed with precision and durability in mind, this tool roll offers a seamless combination of efficiency and convenience, making it an indispensable accessory for both professionals and DIY enthusiasts. The Tool Roll features a compact and portable design, typically made from high-quality materials such as canvas or durable fabric. These materials ensure the tool roll can withstand the rigors of daily use, providing reliable protection for your tools while on the go. The primary function of the Tool Roll is to keep your tools organized and easily accessible. It consists of a series of pockets or compartments that securely hold various tools, preventing them from clattering together and reducing the risk of damage or loss. The tool roll's roll-up design allows for easy storage and transport. Once your tools are in place, simply roll up the tool roll and fasten it with straps or buckles, creating a compact and tidy package that fits neatly in your toolbox, backpack, or car. The Tool Roll is available in various sizes and configurations, catering to different tool sets and requirements. Whether you need a small tool roll for a few essentials or a larger one to accommodate an extensive toolkit, there is a suitable option for every need. With its efficient organization and portability, the Tool Roll is an excellent solution for professionals who need to carry their tools to different job sites or for DIY enthusiasts working on projects at home or on the go. Beyond tools, the Tool Roll finds utility in various other applications. It can also be used to organize and carry art supplies, crafting materials, or any other items that require a neat and secure storage solution. In conclusion, the Tool Roll is an essential accessory that provides efficient organization and easy portability for your essential tools. Its durable materials, compact design, and versatile configurations make it a must-have for professionals and hobbyists alike. Invest in the Tool Roll to experience the convenience and efficiency of a well-organized toolkit, ensuring that your tools are always within reach and in perfect condition. Trust in the reliability of this tool roll to be your go-to accessory for keeping your tools safe, organized, and ready for any task, whether on the job site or in your workshop.
RS PRO Black Polyester Tool Roll, 650 mm x 270 mm Model No 7077271
sku-leadTime Ships within 15 days
RS PRO Black Polyester Tool Roll, 650 mm x 270 mm Model No 7077271
By RS PRO
₹1,887  
The RS PRO Black Polyester Tool Roll, 650 mm x 270 mm Model No 7077271, Tool Roll, a practical and organized solution for storing and carrying your essential tools. Meticulously designed with precision and durability in mind, this tool roll offers a seamless combination of efficiency and convenience, making it an indispensable accessory for both professionals and DIY enthusiasts. The Tool Roll features a compact and portable design, typically made from high-quality materials such as canvas or durable fabric. These materials ensure the tool roll can withstand the rigors of daily use, providing reliable protection for your tools while on the go. The primary function of the Tool Roll is to keep your tools organized and easily accessible. It consists of a series of pockets or compartments that securely hold various tools, preventing them from clattering together and reducing the risk of damage or loss. The tool roll's roll-up design allows for easy storage and transport. Once your tools are in place, simply roll up the tool roll and fasten it with straps or buckles, creating a compact and tidy package that fits neatly in your toolbox, backpack, or car. The Tool Roll is available in various sizes and configurations, catering to different tool sets and requirements. Whether you need a small tool roll for a few essentials or a larger one to accommodate an extensive toolkit, there is a suitable option for every need. With its efficient organization and portability, the Tool Roll is an excellent solution for professionals who need to carry their tools to different job sites or for DIY enthusiasts working on projects at home or on the go. Beyond tools, the Tool Roll finds utility in various other applications. It can also be used to organize and carry art supplies, crafting materials, or any other items that require a neat and secure storage solution. In conclusion, the Tool Roll is an essential accessory that provides efficient organization and easy portability for your essential tools. Its durable materials, compact design, and versatile configurations make it a must-have for professionals and hobbyists alike. Invest in the Tool Roll to experience the convenience and efficiency of a well-organized toolkit, ensuring that your tools are always within reach and in perfect condition. Trust in the reliability of this tool roll to be your go-to accessory for keeping your tools safe, organized, and ready for any task, whether on the job site or in your workshop.
RS PRO Left Hand Thread Thread Die M4 x 0.7 mm Pitch 20.63 mm od, 6680753
sku-leadTime Ships within 15 days
RS PRO Left Hand Thread Thread Die M4 x 0.7 mm Pitch 20.63 mm od, 6680753
By RS PRO
₹1,014  
RS PRO Left Hand Thread Thread Die, M4 x 0.7mm Pitch, 20.63mm od Model No 6680753 is a cutting tool used in metalworking and machining processes to create external threads on cylindrical workpieces. It is an essential tool in the process of threading, which involves cutting or forming screw threads on the surface of a workpiece to facilitate the mating of threaded fasteners.
Thread dies are typically made of high-speed steel or tungsten carbide, which are durable and can withstand the cutting forces involved in the threading process. They come in various shapes and sizes to produce different thread types and pitches.
The thread die consists of a cylindrical body with cutting edges or teeth on the inside surface. These cutting edges are designed to match the profile of the desired thread. To use the thread die, it is mounted on a holder or die stock, which provides a means of turning and guiding the die over the workpiece.
During the threading process, the workpiece is secured in a lathe or held in a vise, and the thread die is applied to the surface at the desired location. As the die is rotated, the cutting edges engage with the workpiece material, gradually removing material to form the external thread.
Thread dies are available in different configurations, such as solid thread dies and adjustable thread dies. Solid thread dies have a fixed thread size and pitch and are typically used for high-volume production of threads with consistent specifications. Adjustable thread dies, on the other hand, can be adjusted to produce threads of various sizes and pitches, providing greater flexibility in threading tasks.
Thread dies are commonly used in various industries, including manufacturing, automotive, aerospace, and construction. They are instrumental in producing threaded fasteners, such as bolts, screws, and studs, which are widely used for joining components together in mechanical assemblies.
In conclusion, a thread die is a cutting tool used in metalworking to create external threads on cylindrical workpieces. It is a crucial tool in the process of threading and is commonly used in industries that require the production of threaded fasteners and components. With their durable construction and various configurations, thread dies offer a versatile and efficient solution for threading tasks, contributing to the creation of precision threads in a wide range of applications.
RS PRO HSS 10-24 Spiral Point Threading Tap 58 mm Length, 455924
sku-leadTime Ships within 15 days
RS PRO HSS 10-24 Spiral Point Threading Tap 58 mm Length, 455924
By RS PRO
₹376  
The RS PRO HSS #10-24 Spiral Point Threading Tap, 58 mm Length 455924 is a high-performance cutting tool meticulously designed for professional threading applications in metalworking and machining. Constructed from high-speed steel (HSS), this threading tap exemplifies exceptional hardness, wear resistance, and heat resilience, ensuring prolonged tool life and superior cutting performance even in the most demanding industrial environments. The spiral point design of this threading tap features a sharp and forward-facing cutting edge, enabling efficient chip evacuation during threading operations. This design reduces cutting forces and torque requirements, resulting in smoother and faster threading, particularly in through-hole applications. Precisely ground cutting flutes equipped with the threading tap facilitate precise thread formation and dimensional accuracy. The advanced spiral point geometry also ensures consistent thread quality, making it well-suited for high-precision threading tasks. The HSS material composition bestows the RS PRO HSS Spiral Point Threading Tap with excellent heat resistance, enabling it to withstand elevated cutting speeds without compromising its cutting edge. This characteristic significantly enhances productivity and reduces machining cycle times. Each RS PRO HSS Spiral Point Threading Tap undergoes rigorous quality control measures, ensuring compliance with industry standards and guaranteeing reliability and consistent performance. Its sturdy construction and ability to handle various metals, alloys, and composites make it an indispensable tool for professionals seeking precise and efficient threading solutions.
RS PRO HSS M5 Hexagon Drive Tap Threading Tap Model No 828151
sku-leadTime Ships within 15 days
RS PRO HSS M5 Hexagon Drive Tap Threading Tap Model No 828151
By RS PRO
₹884  
RS PRO HSS M5 Hexagon Drive Tap Threading Tap Model No 828151 is a cutting tool used to create internal threads in pre-drilled holes or nuts. It is an essential tool in metalworking, woodworking, and various manufacturing processes where threaded connections are required.
The tap typically consists of a cylindrical shank with helical flutes running along its length. These flutes have cutting edges that gradually taper or decrease in diameter towards the tip of the tap. There are three main types of taps: taper tap, plug tap, and second tap (also known as a bottoming tap).
The taper tap, also called the starting tap, has a more pronounced taper at the end of the flutes, allowing it to ease into the hole gradually. It is used to create the initial threads in a hole, and its tapered design helps to prevent the tap from binding or breaking.
The plug tap, on the other hand, has a shorter taper and is used for threading to a specified depth. It is suitable for through-holes and stops when it reaches the desired depth.
The second tap, as mentioned earlier, is also called the bottoming tap. It has a consistent diameter along its length, with a short chamfer at the starting end. This design allows it to cut threads close to the bottom of a hole, making it ideal for threading holes that have already been partially threaded by the taper tap.
When using a threading tap, the material must be securely held in place, and the tap is rotated clockwise into the hole. The cutting edges of the flutes remove material, forming the internal threads that match the external threads of a corresponding screw, bolt, or nut.
Threading taps come in various sizes and thread pitches to accommodate a wide range of applications. They are made from high-speed steel (HSS) or carbide to withstand the cutting forces and maintain their sharpness over prolonged use.
Proper lubrication is essential during the tapping process to reduce friction and heat generation, improving the tool's lifespan and ensuring accurate thread formation.
In summary, threading taps are indispensable tools for creating internal threads in holes, enabling secure and reliable connections between various components in industries ranging from manufacturing and construction to automotive and electronics.
RS PRO HSS M8 Straight Flute Second Threading Tap, 152104
sku-leadTime Ships within 15 days
RS PRO HSS M8 Straight Flute Second Threading Tap, 152104
By RS PRO
₹553  
RS PRO HSS M8 Straight Flute, Second Threading Tap Model No 152104 is a cutting tool used to create internal threads in pre-drilled holes or nuts. It is an essential tool in metalworking, woodworking, and various manufacturing processes where threaded connections are required.
The tap typically consists of a cylindrical shank with helical flutes running along its length. These flutes have cutting edges that gradually taper or decrease in diameter towards the tip of the tap. There are three main types of taps: taper tap, plug tap, and second tap (also known as a bottoming tap).
The taper tap, also called the starting tap, has a more pronounced taper at the end of the flutes, allowing it to ease into the hole gradually. It is used to create the initial threads in a hole, and its tapered design helps to prevent the tap from binding or breaking.
The plug tap, on the other hand, has a shorter taper and is used for threading to a specified depth. It is suitable for through-holes and stops when it reaches the desired depth.
The second tap, as mentioned earlier, is also called the bottoming tap. It has a consistent diameter along its length, with a short chamfer at the starting end. This design allows it to cut threads close to the bottom of a hole, making it ideal for threading holes that have already been partially threaded by the taper tap.
When using a threading tap, the material must be securely held in place, and the tap is rotated clockwise into the hole. The cutting edges of the flutes remove material, forming the internal threads that match the external threads of a corresponding screw, bolt, or nut.
Threading taps come in various sizes and thread pitches to accommodate a wide range of applications. They are made from high-speed steel (HSS) or carbide to withstand the cutting forces and maintain their sharpness over prolonged use.
Proper lubrication is essential during the tapping process to reduce friction and heat generation, improving the tool's lifespan and ensuring accurate thread formation.
In summary, threading taps are indispensable tools for creating internal threads in holes, enabling secure and reliable connections between various components in industries ranging from manufacturing and construction to automotive and electronics.
RS PRO HSS M18 Second, Straight Flute Threading Tap 97 mm Length, 5227632
sku-leadTime Ships within 15 days
RS PRO HSS M18 Second, Straight Flute Threading Tap 97 mm Length, 5227632
By RS PRO
₹5,545  
The RS PRO HSS M18 Second, Straight Flute Threading Tap, 97 mm Length 5227632 is a high-performance cutting tool meticulously engineered for professional threading applications in metalworking and machining. Crafted from high-speed steel (HSS), this threading tap exhibits exceptional hardness, wear resistance, and heat resilience, ensuring prolonged tool life and superior cutting performance even in the most demanding industrial environments. Designed with precision and efficiency in mind, the threading tap features sharp and well-defined cutting edges, facilitating precise thread formation and dimensional accuracy. The advanced flute design enables efficient chip evacuation, minimizing the risk of chip clogging and promoting smooth material removal during threading operations. The HSS material composition endows the RS PRO HSS Threading Tap with excellent heat resistance, enabling it to withstand high temperatures during threading processes without compromising its cutting edge. This characteristic enhances durability and ensures consistent performance during prolonged use. The threading tap is available in various sizes and thread pitches, offering versatility and adaptability to address diverse threading requirements. Each tap in the RS PRO HSS Threading Tap set undergoes rigorous quality control measures, ensuring reliability and consistent performance, making it an indispensable asset for professionals seeking precise and efficient threading solutions.
RS PRO HSS M18 Second, Straight Flute Threading Tap 111 mm Length, 5227648
sku-leadTime Ships within 15 days
RS PRO HSS M18 Second, Straight Flute Threading Tap 111 mm Length, 5227648
By RS PRO
₹5,545  
The RS PRO HSS M18 Second, Straight Flute Threading Tap, 111 mm Length 5227648 is a high-performance cutting tool meticulously engineered for professional threading applications in metalworking and machining. Crafted from high-speed steel (HSS), this threading tap exhibits exceptional hardness, wear resistance, and heat resilience, ensuring prolonged tool life and superior cutting performance even in the most demanding industrial environments. Designed with precision and efficiency in mind, the threading tap features sharp and well-defined cutting edges, facilitating precise thread formation and dimensional accuracy. The advanced flute design enables efficient chip evacuation, minimizing the risk of chip clogging and promoting smooth material removal during threading operations. The HSS material composition endows the RS PRO HSS Threading Tap with excellent heat resistance, enabling it to withstand high temperatures during threading processes without compromising its cutting edge. This characteristic enhances durability and ensures consistent performance during prolonged use. The threading tap is available in various sizes and thread pitches, offering versatility and adaptability to address diverse threading requirements. Each tap in the RS PRO HSS Threading Tap set undergoes rigorous quality control measures, ensuring reliability and consistent performance, making it an indispensable asset for professionals seeking precise and efficient threading solutions.
RS PRO HSS M16 Straight Flute Plug Threading Tap, 152249
sku-leadTime Ships within 15 days
RS PRO HSS M16 Straight Flute Plug Threading Tap, 152249
By RS PRO
₹1,167  
The RS PRO HSS M16 Straight Flute, Plug Threading Tap 152249 is a high-quality cutting tool meticulously designed for professional threading applications in metalworking and machining. Crafted from high-speed steel (HSS), this threading tap exemplifies exceptional hardness, wear resistance, and heat resilience, ensuring prolonged tool life and superior cutting performance even in the most demanding industrial environments. The straight flute design of this threading tap allows for smooth chip evacuation, reducing the risk of chip clogging and promoting efficient material removal during threading operations. The plug threading style further enhances its versatility, enabling it to create threads to the bottom of blind holes with precision and accuracy. The threading tap features precisely ground cutting flutes with sharp and accurate cutting edges, facilitating precise thread formation and dimensional accuracy. This advanced cutting geometry reduces cutting forces, minimizing the risk of tap breakage and ensuring consistent thread quality. The HSS material composition endows the RS PRO Straight Flute, Plug Threading Tap with excellent heat resistance, enabling it to withstand elevated cutting speeds and maintain its cutting edge under heavy workloads. This capability significantly enhances productivity and reduces machining cycle times. Each RS PRO HSS Straight Flute, Plug Threading Tap undergoes stringent quality control measures to meet or exceed industry standards, assuring users of its reliability and performance consistency. Its robust construction and ability to handle various metals, alloys, and composites make it an invaluable tool for professionals seeking precise and efficient threading solutions. This threading tap is an essential asset for machinists, engineers, and craftsmen seeking superior thread cutting performance. With its cutting-edge features and durable performance, the RS PRO HSS Straight Flute, Plug Threading Tap stands as a top-tier choice for achieving accurate and reliable threads in the industrial environment.
RS PRO HSS M14 Second, Straight Flute Threading Tap 95 mm Length, 5227610
sku-leadTime Ships within 15 days
RS PRO HSS M14 Second, Straight Flute Threading Tap 95 mm Length, 5227610
By RS PRO
₹3,893  
The RS PRO HSS M14 Second, Straight Flute Threading Tap, 95 mm Length 5227610 is a high-performance cutting tool meticulously engineered for professional threading applications in metalworking and machining. Crafted from high-speed steel (HSS), this threading tap exhibits exceptional hardness, wear resistance, and heat resilience, ensuring prolonged tool life and superior cutting performance even in the most demanding industrial environments. Designed with precision and efficiency in mind, the threading tap features sharp and well-defined cutting edges, facilitating precise thread formation and dimensional accuracy. The advanced flute design enables efficient chip evacuation, minimizing the risk of chip clogging and promoting smooth material removal during threading operations. The HSS material composition endows the RS PRO HSS Threading Tap with excellent heat resistance, enabling it to withstand high temperatures during threading processes without compromising its cutting edge. This characteristic enhances durability and ensures consistent performance during prolonged use. The threading tap is available in various sizes and thread pitches, offering versatility and adaptability to address diverse threading requirements. Each tap in the RS PRO HSS Threading Tap set undergoes rigorous quality control measures, ensuring reliability and consistent performance, making it an indispensable asset for professionals seeking precise and efficient threading solutions.
RS PRO HSS M12 Straight Flute Plug Threading Tap, 152211
sku-leadTime Ships within 15 days
RS PRO HSS M12 Straight Flute Plug Threading Tap, 152211
By RS PRO
₹1,651  
The RS PRO HSS M12 Straight Flute, Plug Threading Tap 152211 is a high-quality cutting tool meticulously designed for professional threading applications in metalworking and machining. Crafted from high-speed steel (HSS), this threading tap exemplifies exceptional hardness, wear resistance, and heat resilience, ensuring prolonged tool life and superior cutting performance even in the most demanding industrial environments. The straight flute design of this threading tap allows for smooth chip evacuation, reducing the risk of chip clogging and promoting efficient material removal during threading operations. The plug threading style further enhances its versatility, enabling it to create threads to the bottom of blind holes with precision and accuracy. The threading tap features precisely ground cutting flutes with sharp and accurate cutting edges, facilitating precise thread formation and dimensional accuracy. This advanced cutting geometry reduces cutting forces, minimizing the risk of tap breakage and ensuring consistent thread quality. The HSS material composition endows the RS PRO Straight Flute, Plug Threading Tap with excellent heat resistance, enabling it to withstand elevated cutting speeds and maintain its cutting edge under heavy workloads. This capability significantly enhances productivity and reduces machining cycle times. Each RS PRO HSS Straight Flute, Plug Threading Tap undergoes stringent quality control measures to meet or exceed industry standards, assuring users of its reliability and performance consistency. Its robust construction and ability to handle various metals, alloys, and composites make it an invaluable tool for professionals seeking precise and efficient threading solutions. This threading tap is an essential asset for machinists, engineers, and craftsmen seeking superior thread cutting performance. With its cutting-edge features and durable performance, the RS PRO HSS Straight Flute, Plug Threading Tap stands as a top-tier choice for achieving accurate and reliable threads in the industrial environment.
Recommended Items
sku-leadTime Ships within 10 days
WD-40 Multipurpose Cleaning Spray 420 ml
14
₹312
oos-available Ships within 24 hrs
Nataraj Classic Use & Throw Ball Pens Blue (Pack of 40)
17
Pack of 40 piece
₹150
oos-available Ships within 24 hrs
Silverton 65 GSM A4 Copier Paper (Pack of 10 Ream)
13
Pack of 10 ream
₹1,886
oos-available Ships within 24 hrs
Generic 5 L Rose Fragrance Liquid Soap Hand Wash
1
Can of 1 piece
₹296
oos-available Ships within 24 hrs
Generic BOPP Packaging Brown Tape 50.8mm(2 Inch) x 50 m (Pack of 6)
13
Pack of 6 piece
₹173
oos-available Ships within 24 hrs
Generic Floor Cleaner Lemon Fragrance Yellow, (5 L)
Can of 1 piece
₹271
oos-available Ships within 24 hrs
POWERWASH 40X40 cm 600 GSM Microfiber Cloth (Pack of 4)
11
Pack of 4 piece
₹184
oos-available Ships within 24 hrs
Luxor 1223 Whiteboard Marker Pens Black (Pack of 10)
Pack of 10 piece
₹152
oos-available Ships within 24 hrs
Duracell Chhota Power AAA Alkaline Batteries (Pack of 12)
15
Pack of 12 piece
₹214
oos-available Ships within 24 hrs
Allen Cooper Steel Toe Safety Shoes Low Ankle PU Sole Size 8 UK/India Black & Grey, ACL-1156
4
₹1,519
oos-available Ships within 24 hrs
Silverton 70 GSM A4 Copier Paper (Pack of 10 Ream)
17
Pack of 10 ream
₹1,999
oos-available Ships within 24 hrs
IB BASICS 555 GSM Box Index File With Lamination Legal A4 Size Assorted Color (Pack of 4)
Pack of 4 piece
₹269
oos-available Ships within 24 hrs
GENERIC 10x12 inch Plastic Tamper Resistant Courier Bag with POD, 51 Micron (Pack of 100)
2
Pack of 100 piece
₹185
oos-available Ships within 24 hrs
IB BASICS 310 GSM Cobra File (Spring Clip) Assorted Color A4 Size (Pack of 10)
Pack of 10 piece
₹150
oos-available Ships within 24 hrs
Safari Pro Steel Toe Derby Safety Shoes Low Ankle Size UK 8 Black Model Power
6
₹194
oos-available Ships within 24 hrs
ABRO PU Foam Insulation Sealant Off White, 750 ml
₹393
oos-available Ships within 24 hrs
GENERIC Steel Toe Safety Shoes High Ankle PVC Sole Size UK 9 Black, Power-9
12
₹299
oos-available Ships within 24 hrs
GENERIC 12A Compatible Toner Cartridge Black for HP LaserJet 1010 and 1020 Printer series, HP LaserJet 3015, 3020, 3030, 3050, 3050z, 3052, and 3055 All-in-One Printer series, and HP LaserJet M1005 mfp
14
₹412
Browsing History
sku-leadTime Ships within 5 days
NVK CULTIVATOR 9 - TYNES
₹37,799
sku-leadTime Ships within 7 days
Kisankraft Agricultural Inter Cultivator KK-IC-250D
₹99,749
sku-leadTime Ships within 3 days
RBD Mini Harvester Petrol Type with ISI Honda Engine RBD-RPR
₹1,67,999
sku-leadTime Ships within 7 days
Kisankraft Diesel Intercultivator KK-IC-256D
₹93,449
sku-leadTime Ships within 10 days
Stihl 7 HP Petrol Operated Power Tiller, MH-710
₹82,949
sku-leadTime Ships within 3 days
RBD Mini Harvester Diesel Type with ISI Greaves Cotton Engine RBD-RDR
₹1,78,499
sku-leadTime Ships within 3 days
Texas 306 cc 4 stroke Power Weeder Pro Trac 950D with Self Start
₹1,78,499
sku-leadTime Ships within 6 days
Neptune NC-100 380 RPM Red Weeder
₹44,099 ₹54,600
19.23% OFF
sku-leadTime Ships within 7 days
KISANKRAFT Agricultural Inter Cultivator/Power Weeder 208 cc 4 Stroke Petrol Engine, KK-IC-208P
₹86,139
Helpline Number
Helpline Number Call: +91 9650660070 (Mon-Sun: 9am-8pm)
Return within 7 days
Return within 7 days of receiving your order
100% Safe & Secure Payments
100% Safe & Secure Payments Pay using secure payment methods
100% ORIGINAL
100% ORIGINAL guarantee for all products
Complete products
Complete products 20,00,000+ products from 12,000+ Brands
Buyer Protection
Buyer Protection Committed to buyer interests to provide a smooth shopping experience.
Experience Industrybuying App
play store app store
Follow us on
facebook twitter instagram pinterest linkedin

Company

Sister Site

Help

Copyright ©industrybuying.com 2013-2026 All Right Reserved
payment options