call
Have a question? Call us now at +91 9650660070
category menu Categories
search

Filter

Categories
Price Range
Min Price:
Max Price:
₹
-
₹
Discount
Type of Product

Salzer Ac Relay

Showing 10 out of 10 products

Sort by
Salzer Relay M SERIES - MKP 240V AC 2 Pole, MKP 2P 240A (Pack of 10)
sku-leadTime Ships within 45 days
Salzer 2 Pole Transparent AC Relay MKP Series (Pack of 10)
By Salzer
Pack of 10 piece
₹4,483 - ₹6,961
Salzer 2 Pole Transparent AC Relay MKP Series is an electrical device or component that is used to control or switch an electrical circuit by mechanically or magnetically opening or closing electrical contacts. Relays are commonly used to control high-voltage and high-current electrical devices with a low-voltage control signal.Input: A relay typically has an input side and an output side. The input side is where you provide a low-voltage control signal, usually from a switch, sensor, or some other control device. This signal can be as low as a few volts. Coil: The input side of the relay includes a coil of wire. When the control signal is applied to the coil, it creates a magnetic field around it. Contacts: The output side of the relay has one or more sets of electrical contacts that are mechanically connected to the coil. These contacts can be in one of two states: normally open (NO) or normally closed (NC). Normally Open (NO): In this state, the relay contacts are open, and no electrical current can flow through the circuit. Normally Closed (NC): In this state, the relay contacts are closed, allowing electrical current to flow through the circuit. Activation: When the control signal energizes the coil by creating a magnetic field, it causes the relay's contacts to change state. If the relay was initially in the NO state, it will switch to the NC state, and vice versa. This effectively opens or closes the electrical circuit on the output side of the relay. Relays serve various purposes, including: Switching high-power loads: Relays are often used to control devices that require high voltage or high current, such as motors, lights, heaters, or solenoids. Isolation: Relays can provide electrical isolation between the control circuit and the load circuit. This helps protect sensitive control components from voltage spikes or interference in the load circuit. Signal amplification: Relays can amplify a weak control signal to switch a more substantial load. Remote control: Relays allow for remote control of electrical devices by using a low-voltage control signal. Automation and control systems: They are a fundamental component in automation and control systems, allowing for the sequencing and control of various devices and processes
green checkType of Product : AC Relay
green checkNo. of Pole : 2 Pole
green checkSeries : MKP Series
green checkMounting Type : PCB mounted
Salzer Relay M SERIES - MSP 12V AC 4 Pole, MSP 4P 12A (Pack of 20)
sku-leadTime Ships within 45 days
Salzer Relay M SERIES - MSP 12V AC 4 Pole, MSP 4P 12A (Pack of 20)
By Salzer
Pack of 20 piece
₹8,141  
The Salzer M SERIES - MSP (Equivalent to MY) 12 V AC 4P Relay, MSP4P12A ,(Pack of 20) is an electrical device or component that is used to control or switch an electrical circuit by mechanically or magnetically opening or closing electrical contacts. Relays are commonly used to control high-voltage and high-current electrical devices with a low-voltage control signal.Input: A relay typically has an input side and an output side. The input side is where you provide a low-voltage control signal, usually from a switch, sensor, or some other control device. This signal can be as low as a few volts. Coil: The input side of the relay includes a coil of wire. When the control signal is applied to the coil, it creates a magnetic field around it. Contacts: The output side of the relay has one or more sets of electrical contacts that are mechanically connected to the coil. These contacts can be in one of two states: normally open (NO) or normally closed (NC). Normally Open (NO): In this state, the relay contacts are open, and no electrical current can flow through the circuit. Normally Closed (NC): In this state, the relay contacts are closed, allowing electrical current to flow through the circuit. Activation: When the control signal energizes the coil by creating a magnetic field, it causes the relay's contacts to change state. If the relay was initially in the NO state, it will switch to the NC state, and vice versa. This effectively opens or closes the electrical circuit on the output side of the relay. Relays serve various purposes, including: Switching high-power loads: Relays are often used to control devices that require high voltage or high current, such as motors, lights, heaters, or solenoids. Isolation: Relays can provide electrical isolation between the control circuit and the load circuit. This helps protect sensitive control components from voltage spikes or interference in the load circuit. Signal amplification: Relays can amplify a weak control signal to switch a more substantial load. Remote control: Relays allow for remote control of electrical devices by using a low-voltage control signal. Automation and control systems: They are a fundamental component in automation and control systems, allowing for the sequencing and control of various devices and processes
Salzer Relay M SERIES - MKP 240V AC 3 Pole, MKP 3P 240A (Pack of 10)
sku-leadTime Ships within 45 days
Salzer 3 Pole Transparent AC Relay MKP Series (Pack of 10)
By Salzer
Pack of 10 piece
₹4,719 - ₹8,023
Salzer 3 Pole Transparent AC Relay MKP Series is an electrical device or component that is used to control or switch an electrical circuit by mechanically or magnetically opening or closing electrical contacts. Relays are commonly used to control high-voltage and high-current electrical devices with a low-voltage control signal.Input: A relay typically has an input side and an output side. The input side is where you provide a low-voltage control signal, usually from a switch, sensor, or some other control device. This signal can be as low as a few volts. Coil: The input side of the relay includes a coil of wire. When the control signal is applied to the coil, it creates a magnetic field around it. Contacts: The output side of the relay has one or more sets of electrical contacts that are mechanically connected to the coil. These contacts can be in one of two states: normally open (NO) or normally closed (NC). Normally Open (NO): In this state, the relay contacts are open, and no electrical current can flow through the circuit. Normally Closed (NC): In this state, the relay contacts are closed, allowing electrical current to flow through the circuit. Activation: When the control signal energizes the coil by creating a magnetic field, it causes the relay's contacts to change state. If the relay was initially in the NO state, it will switch to the NC state, and vice versa. This effectively opens or closes the electrical circuit on the output side of the relay. Relays serve various purposes, including: Switching high-power loads: Relays are often used to control devices that require high voltage or high current, such as motors, lights, heaters, or solenoids. Isolation: Relays can provide electrical isolation between the control circuit and the load circuit. This helps protect sensitive control components from voltage spikes or interference in the load circuit. Signal amplification: Relays can amplify a weak control signal to switch a more substantial load. Remote control: Relays allow for remote control of electrical devices by using a low-voltage control signal. Automation and control systems: They are a fundamental component in automation and control systems, allowing for the sequencing and control of various devices and processes
green checkType of Product : AC Relay
green checkNo. of Pole : 3 Pole
green checkSeries : MKP Series
green checkMounting Type : PCB mounted
Salzer Relay M SERIES - MKG 24V AC 5A 3 Pole, MKG 3P 30 (Pack of 10)
sku-leadTime Ships within 45 days
Salzer 3 Pole Transparent AC Relay MKG Series (Pack of 10)
By Salzer
Pack of 10 piece
₹4,247 - ₹5,073
Salzer 3 Pole Transparent AC Relay MKG Series is an electrical device or component that is used to control or switch an electrical circuit by mechanically or magnetically opening or closing electrical contacts. Relays are commonly used to control high-voltage and high-current electrical devices with a low-voltage control signal.Input: A relay typically has an input side and an output side. The input side is where you provide a low-voltage control signal, usually from a switch, sensor, or some other control device. This signal can be as low as a few volts. Coil: The input side of the relay includes a coil of wire. When the control signal is applied to the coil, it creates a magnetic field around it. Contacts: The output side of the relay has one or more sets of electrical contacts that are mechanically connected to the coil. These contacts can be in one of two states: normally open (NO) or normally closed (NC). Normally Open (NO): In this state, the relay contacts are open, and no electrical current can flow through the circuit. Normally Closed (NC): In this state, the relay contacts are closed, allowing electrical current to flow through the circuit. Activation: When the control signal energizes the coil by creating a magnetic field, it causes the relay's contacts to change state. If the relay was initially in the NO state, it will switch to the NC state, and vice versa. This effectively opens or closes the electrical circuit on the output side of the relay. Relays serve various purposes, including: Switching high-power loads: Relays are often used to control devices that require high voltage or high current, such as motors, lights, heaters, or solenoids. Isolation: Relays can provide electrical isolation between the control circuit and the load circuit. This helps protect sensitive control components from voltage spikes or interference in the load circuit. Signal amplification: Relays can amplify a weak control signal to switch a more substantial load. Remote control: Relays allow for remote control of electrical devices by using a low-voltage control signal. Automation and control systems: They are a fundamental component in automation and control systems, allowing for the sequencing and control of various devices and processes
green checkType of Product : AC Relay
green checkNo. of Pole : 3 Pole
green checkSeries : MKG Series
green checkMounting Type : PCB mounted
Salzer Relay M SERIES - MSC 240V AC 5A 2 Pole, MSC 2P 240A (Pack of 10)
sku-leadTime Ships within 45 days
Salzer Transparent AC Relay MSC Series (Pack of 10)
By Salzer
Pack of 10 piece
₹5,073 - ₹5,191
Salzer Transparent AC Relay MSC Series is an electrical device or component that is used to control or switch an electrical circuit by mechanically or magnetically opening or closing electrical contacts. Relays are commonly used to control high-voltage and high-current electrical devices with a low-voltage control signal.Input: A relay typically has an input side and an output side. The input side is where you provide a low-voltage control signal, usually from a switch, sensor, or some other control device. This signal can be as low as a few volts. Coil: The input side of the relay includes a coil of wire. When the control signal is applied to the coil, it creates a magnetic field around it. Contacts: The output side of the relay has one or more sets of electrical contacts that are mechanically connected to the coil. These contacts can be in one of two states: normally open (NO) or normally closed (NC). Normally Open (NO): In this state, the relay contacts are open, and no electrical current can flow through the circuit. Normally Closed (NC): In this state, the relay contacts are closed, allowing electrical current to flow through the circuit. Activation: When the control signal energizes the coil by creating a magnetic field, it causes the relay's contacts to change state. If the relay was initially in the NO state, it will switch to the NC state, and vice versa. This effectively opens or closes the electrical circuit on the output side of the relay. Relays serve various purposes, including: Switching high-power loads: Relays are often used to control devices that require high voltage or high current, such as motors, lights, heaters, or solenoids. Isolation: Relays can provide electrical isolation between the control circuit and the load circuit. This helps protect sensitive control components from voltage spikes or interference in the load circuit. Signal amplification: Relays can amplify a weak control signal to switch a more substantial load. Remote control: Relays allow for remote control of electrical devices by using a low-voltage control signal. Automation and control systems: They are a fundamental component in automation and control systems, allowing for the sequencing and control of various devices and processes
green checkType of Product : AC Relay
green checkSeries : MSC Series
green checkCoil Voltage : 240 V AC
green checkMounting Type : PCB mounted
Salzer Relay MSP - Test Button 24V AC 7A 4 Pole, MSP4P024A07TNE (Pack of 20)
sku-leadTime Ships within 45 days
Salzer 4 Pole Transparent AC Relay MSP - Test Button (Pack of 20)
By Salzer
Pack of 20 piece
₹9,321 - ₹10,265
Salzer 4 Pole Transparent AC Relay MSP - Test Button is an electrical device or component that is used to control or switch an electrical circuit by mechanically or magnetically opening or closing electrical contacts. Relays are commonly used to control high-voltage and high-current electrical devices with a low-voltage control signal.Input: A relay typically has an input side and an output side. The input side is where you provide a low-voltage control signal, usually from a switch, sensor, or some other control device. This signal can be as low as a few volts. Coil: The input side of the relay includes a coil of wire. When the control signal is applied to the coil, it creates a magnetic field around it. Contacts: The output side of the relay has one or more sets of electrical contacts that are mechanically connected to the coil. These contacts can be in one of two states: normally open (NO) or normally closed (NC). Normally Open (NO): In this state, the relay contacts are open, and no electrical current can flow through the circuit. Normally Closed (NC): In this state, the relay contacts are closed, allowing electrical current to flow through the circuit. Activation: When the control signal energizes the coil by creating a magnetic field, it causes the relay's contacts to change state. If the relay was initially in the NO state, it will switch to the NC state, and vice versa. This effectively opens or closes the electrical circuit on the output side of the relay. Relays serve various purposes, including: Switching high-power loads: Relays are often used to control devices that require high voltage or high current, such as motors, lights, heaters, or solenoids. Isolation: Relays can provide electrical isolation between the control circuit and the load circuit. This helps protect sensitive control components from voltage spikes or interference in the load circuit. Signal amplification: Relays can amplify a weak control signal to switch a more substantial load. Remote control: Relays allow for remote control of electrical devices by using a low-voltage control signal. Automation and control systems: They are a fundamental component in automation and control systems, allowing for the sequencing and control of various devices and processes
green checkType of Product : AC Relay
green checkNo. of Pole : 4 Pole
green checkSeries : MSP - Test Button
green checkMounting Type : PCB mounted
Salzer Relay M SERIES - MSP 110V AC 3 Pole, MSP 3P 110A (Pack of 20)
sku-leadTime Ships within 45 days
Salzer 3 Pole Transparent AC Relay MSP Series (Pack of 20)
By Salzer
Pack of 20 piece
₹8,023 - ₹8,731
Salzer 3 Pole Transparent AC Relay MSP Series is an electrical device or component that is used to control or switch an electrical circuit by mechanically or magnetically opening or closing electrical contacts. Relays are commonly used to control high-voltage and high-current electrical devices with a low-voltage control signal.Input: A relay typically has an input side and an output side. The input side is where you provide a low-voltage control signal, usually from a switch, sensor, or some other control device. This signal can be as low as a few volts. Coil: The input side of the relay includes a coil of wire. When the control signal is applied to the coil, it creates a magnetic field around it. Contacts: The output side of the relay has one or more sets of electrical contacts that are mechanically connected to the coil. These contacts can be in one of two states: normally open (NO) or normally closed (NC). Normally Open (NO): In this state, the relay contacts are open, and no electrical current can flow through the circuit. Normally Closed (NC): In this state, the relay contacts are closed, allowing electrical current to flow through the circuit. Activation: When the control signal energizes the coil by creating a magnetic field, it causes the relay's contacts to change state. If the relay was initially in the NO state, it will switch to the NC state, and vice versa. This effectively opens or closes the electrical circuit on the output side of the relay. Relays serve various purposes, including: Switching high-power loads: Relays are often used to control devices that require high voltage or high current, such as motors, lights, heaters, or solenoids. Isolation: Relays can provide electrical isolation between the control circuit and the load circuit. This helps protect sensitive control components from voltage spikes or interference in the load circuit. Signal amplification: Relays can amplify a weak control signal to switch a more substantial load. Remote control: Relays allow for remote control of electrical devices by using a low-voltage control signal. Automation and control systems: They are a fundamental component in automation and control systems, allowing for the sequencing and control of various devices and processes
green checkType of Product : AC Relay
green checkNo. of Pole : 3 Pole
green checkSeries : MSP Series
green checkMounting Type : PCB mounted
Salzer Relay M SERIES - MKG 110V AC 5A 2 Pole, MKG 2P 06A (Pack of 10)
sku-leadTime Ships within 45 days
Salzer Relay M SERIES - MKG 110V AC 5A 2 Pole, MKG 2P 06A (Pack of 10)
By Salzer
Pack of 10 piece
₹5,073  
The Salzer M SERIES - MKG 110 V AC 2P 5 Amps Relay, MKG2P06A ,(Pack of 10) is an electrical device or component that is used to control or switch an electrical circuit by mechanically or magnetically opening or closing electrical contacts. Relays are commonly used to control high-voltage and high-current electrical devices with a low-voltage control signal.Input: A relay typically has an input side and an output side. The input side is where you provide a low-voltage control signal, usually from a switch, sensor, or some other control device. This signal can be as low as a few volts. Coil: The input side of the relay includes a coil of wire. When the control signal is applied to the coil, it creates a magnetic field around it. Contacts: The output side of the relay has one or more sets of electrical contacts that are mechanically connected to the coil. These contacts can be in one of two states: normally open (NO) or normally closed (NC). Normally Open (NO): In this state, the relay contacts are open, and no electrical current can flow through the circuit. Normally Closed (NC): In this state, the relay contacts are closed, allowing electrical current to flow through the circuit. Activation: When the control signal energizes the coil by creating a magnetic field, it causes the relay's contacts to change state. If the relay was initially in the NO state, it will switch to the NC state, and vice versa. This effectively opens or closes the electrical circuit on the output side of the relay. Relays serve various purposes, including: Switching high-power loads: Relays are often used to control devices that require high voltage or high current, such as motors, lights, heaters, or solenoids. Isolation: Relays can provide electrical isolation between the control circuit and the load circuit. This helps protect sensitive control components from voltage spikes or interference in the load circuit. Signal amplification: Relays can amplify a weak control signal to switch a more substantial load. Remote control: Relays allow for remote control of electrical devices by using a low-voltage control signal. Automation and control systems: They are a fundamental component in automation and control systems, allowing for the sequencing and control of various devices and processes
Salzer Relay MSP - Test Button 240V AC 12A 2 Pole, MSP2P240A12TNE (Pack of 20)
sku-leadTime Ships within 45 days
Salzer 2 Pole Transparent AC Relay MSP - Test Button (Pack of 20)
By Salzer
Pack of 20 piece
₹8,023 - ₹8,495
Salzer 2 Pole Transparent AC Relay MSP - Test Button is an electrical device or component that is used to control or switch an electrical circuit by mechanically or magnetically opening or closing electrical contacts. Relays are commonly used to control high-voltage and high-current electrical devices with a low-voltage control signal.Input: A relay typically has an input side and an output side. The input side is where you provide a low-voltage control signal, usually from a switch, sensor, or some other control device. This signal can be as low as a few volts. Coil: The input side of the relay includes a coil of wire. When the control signal is applied to the coil, it creates a magnetic field around it. Contacts: The output side of the relay has one or more sets of electrical contacts that are mechanically connected to the coil. These contacts can be in one of two states: normally open (NO) or normally closed (NC). Normally Open (NO): In this state, the relay contacts are open, and no electrical current can flow through the circuit. Normally Closed (NC): In this state, the relay contacts are closed, allowing electrical current to flow through the circuit. Activation: When the control signal energizes the coil by creating a magnetic field, it causes the relay's contacts to change state. If the relay was initially in the NO state, it will switch to the NC state, and vice versa. This effectively opens or closes the electrical circuit on the output side of the relay. Relays serve various purposes, including: Switching high-power loads: Relays are often used to control devices that require high voltage or high current, such as motors, lights, heaters, or solenoids. Isolation: Relays can provide electrical isolation between the control circuit and the load circuit. This helps protect sensitive control components from voltage spikes or interference in the load circuit. Signal amplification: Relays can amplify a weak control signal to switch a more substantial load. Remote control: Relays allow for remote control of electrical devices by using a low-voltage control signal. Automation and control systems: They are a fundamental component in automation and control systems, allowing for the sequencing and control of various devices and processes
green checkType of Product : AC Relay
green checkNo. of Pole : 2 Pole
green checkSeries : MSP - Test Button
green checkMounting Type : PCB mounted
Salzer Relay M SERIES - MSP 12V AC 2 Pole, MSP 2P 12A (Pack of 20)
sku-leadTime Ships within 45 days
Salzer Relay M SERIES - MSP 12V AC 2 Pole, MSP 2P 12A (Pack of 20)
By Salzer
Pack of 20 piece
₹6,725  
The Salzer M SERIES - MSP (Equivalent to MY) 12 V AC 2P Relay, MSP2P12A ,(Pack of 20) is an electrical device or component that is used to control or switch an electrical circuit by mechanically or magnetically opening or closing electrical contacts. Relays are commonly used to control high-voltage and high-current electrical devices with a low-voltage control signal.Input: A relay typically has an input side and an output side. The input side is where you provide a low-voltage control signal, usually from a switch, sensor, or some other control device. This signal can be as low as a few volts. Coil: The input side of the relay includes a coil of wire. When the control signal is applied to the coil, it creates a magnetic field around it. Contacts: The output side of the relay has one or more sets of electrical contacts that are mechanically connected to the coil. These contacts can be in one of two states: normally open (NO) or normally closed (NC). Normally Open (NO): In this state, the relay contacts are open, and no electrical current can flow through the circuit. Normally Closed (NC): In this state, the relay contacts are closed, allowing electrical current to flow through the circuit. Activation: When the control signal energizes the coil by creating a magnetic field, it causes the relay's contacts to change state. If the relay was initially in the NO state, it will switch to the NC state, and vice versa. This effectively opens or closes the electrical circuit on the output side of the relay. Relays serve various purposes, including: Switching high-power loads: Relays are often used to control devices that require high voltage or high current, such as motors, lights, heaters, or solenoids. Isolation: Relays can provide electrical isolation between the control circuit and the load circuit. This helps protect sensitive control components from voltage spikes or interference in the load circuit. Signal amplification: Relays can amplify a weak control signal to switch a more substantial load. Remote control: Relays allow for remote control of electrical devices by using a low-voltage control signal. Automation and control systems: They are a fundamental component in automation and control systems, allowing for the sequencing and control of various devices and processes
Recommended Items
sku-leadTime Ships within 10 days
WD-40 Multipurpose Cleaning Spray 420 ml
14
₹353
sku-leadTime Ships within 10 days
Nataraj Classic Use & Throw Ball Pens Blue (Pack of 40)
19
Pack of 40 piece
₹110 ₹110
0.01% OFF
sku-leadTime Ships within 2 days
Sillverton 65 GSM A4 Copier Paper (Pack of 10 Ream)
14
Pack of 10 ream
₹2,005
oos-available Ships within 24 hrs
Generic 5 L Rose Fragrance Liquid Soap Hand Wash
1
Can of 1 piece
₹296
oos-available Ships within 24 hrs
Generic BOPP Packaging Brown Tape 50.8mm(2 Inch) x 50 m (Pack of 6)
13
Pack of 6 piece
₹254
oos-available Ships within 24 hrs
Generic Floor Cleaner Lemon Fragrance Yellow, (5 L)
Can of 1 piece
₹271
oos-available Ships within 24 hrs
POWERWASH 40X40 cm 600 GSM Microfiber Cloth (Pack of 4)
11
Pack of 4 piece
₹184
oos-available Ships within 24 hrs
Luxor 1223 Whiteboard Marker Pens Black (Pack of 10)
1
Pack of 10 piece
₹164
oos-available Ships within 24 hrs
Duracell Chhota Power AAA Alkaline Batteries (Pack of 12)
17
Pack of 12 piece
₹214
oos-available Ships within 24 hrs
Allen Cooper Steel Toe Safety Shoes Low Ankle PU Sole Size 8 UK/India Black & Grey, ACL-1156
4
₹1,509
oos-available Ships within 24 hrs
IB BASICS 555 GSM Box Index File With Lamination Legal A4 Size Assorted Color (Pack of 4)
Pack of 4 piece
₹269
sku-leadTime Ships within 2 days
Sillverton 70 GSM A4 Copier Paper (Pack of 10 Ream)
18
Pack of 10 ream
₹1,864
sku-leadTime Ships within 10 days
GENERIC 10x12 inch Plastic Tamper Resistant Courier Bag with POD, 51 Micron (Pack of 100)
3
Pack of 100 piece
₹231
oos-available Ships within 24 hrs
IB BASICS 310 GSM Cobra File (Spring Clip) Assorted Color A4 Size (Pack of 10)
1
Pack of 10 piece
₹150
oos-available Ships within 24 hrs
Safari Pro Steel Toe Derby Safety Shoes Low Ankle Size UK 8 Black Model Power
6
₹219
ABRO PU Foam Insulation Sealant Off White, 750 ml
₹683
sku-leadTime Ships within 10 days
GENERIC Steel Toe Safety Shoes High Ankle PVC Sole Size UK 9 Black, Power-9
12
₹289
oos-available Ships within 24 hrs
GENERIC 12A Compatible Toner Cartridge Black for HP LaserJet 1010 and 1020 Printer series, HP LaserJet 3015, 3020, 3030, 3050, 3050z, 3052, and 3055 All-in-One Printer series, and HP LaserJet M1005 mfp
14
₹412
Browsing History
sku-leadTime Ships within 5 days
NVK CULTIVATOR 9 - TYNES
₹37,799
sku-leadTime Ships within 7 days
Kisankraft Agricultural Inter Cultivator KK-IC-250D
₹99,749
sku-leadTime Ships within 3 days
RBD Mini Harvester Petrol Type with ISI Honda Engine RBD-RPR
₹1,67,999
sku-leadTime Ships within 7 days
Kisankraft Diesel Intercultivator KK-IC-256D
₹93,449
sku-leadTime Ships within 10 days
Stihl 7 HP Petrol Operated Power Tiller, MH-710
₹82,949
sku-leadTime Ships within 3 days
RBD Mini Harvester Diesel Type with ISI Greaves Cotton Engine RBD-RDR
₹1,78,499
sku-leadTime Ships within 3 days
Texas 306 cc 4 stroke Power Weeder Pro Trac 950D with Self Start
₹1,78,499
sku-leadTime Ships within 6 days
Neptune NC-100 380 RPM Red Weeder
₹44,099 ₹54,600
19.23% OFF
sku-leadTime Ships within 7 days
KISANKRAFT Agricultural Inter Cultivator/Power Weeder 208 cc 4 Stroke Petrol Engine, KK-IC-208P
₹86,139

Top Selling Salzer Ac Relay Products Price List for June 2026

Product Name Expected Price Dispatch Time Discount
RMG GSM Gate/Door Opener Relay Switch ₹4,719 30 days 42.85% OFF
Omron MY2N AC12 12 V AC Relay ₹825 24 hrs --
Omron MY2N AC48 48 V AC Relay ₹636 24 hrs --
Omron MY4N AC48 48 V AC Relay ₹1,297 24 hrs --
Omron MY4N AC110 110 V AC Relay ₹707 24 hrs --
This data was last updated on 29/06/2026
Helpline Number
Helpline Number Call: +91 9650660070 (Mon-Sun: 9am-8pm)
Return within 7 days
Return within 7 days of receiving your order
100% Safe & Secure Payments
100% Safe & Secure Payments Pay using secure payment methods
100% ORIGINAL
100% ORIGINAL guarantee for all products
Complete products
Complete products 20,00,000+ products from 12,000+ Brands
Buyer Protection
Buyer Protection Committed to buyer interests to provide a smooth shopping experience.
Experience Industrybuying App
play store app store
Follow us on
facebook twitter instagram pinterest linkedin

Company

Sister Site

Help

Copyright ©industrybuying.com 2013-2026 All Right Reserved
payment options