Showing 40 out of 238 products
Type of Product : Stainless Steel Steam Trap
Material : Stainless Steel
Model No : IC-3
Body Test Pressure : 63.3 kg/cm² 900 Psig. (Hyd.)
End Connection Type : Screwed
Working Pressure : Suitable for 450 Psig. (31.65 kg/cm²)
Trim : AISI 420
Maximum Temperature : 400ºC (750ºF)
Model No : WM 7
Type of Product : Electromagnetic Flow Meter
End Connection Type : DIN PN 1.6
Class : PN 1.6
Pattern Type : Electro Magnetic Type IP 65, Voltage 85 to 240v(AC)
Type of Product : Air Vent Valve
Material : Brass
Model No : AV
End Connection Type : Spring Loaded
Temperature : 100°C Max.
Class : PN 1.6
Related Searches
Model No : FBV 5
Body Material : Forged Brass
End Connection Type : Screwed
Body Test Pressure : 1.05 MPa
Temperature : Temperature of Water 45°C Max.
Type of Product : Water Meter
Model No : WM 1
Pattern Type : Dry Dial, Fan Wheel, Multijet, Magnetic drive type
Body Material : Brass
Product Standard : ISO 4064 Class-B
End Details : Screwed female BSP Parallel Hose Union ends
Body Test Pressure : 1.5MPa Hyd.
Maximum Working Pressure : 1 MPa
Type of Product : Gun Metal Foot Valve
Model No : IS 21
End Connection Type : Screwed
Seat Type : Integral seat
Test Pressure : 300 Psig. Hyd
Type of Product : Pressure Reducing Valve
Model No : PRV
Material : Forged Brass
Body Test Pressure : 16barg Hyd. (232Psig. Hyd.)
Max. Inlet Pressure P1(bar) : 16 barg
Outlet Pressure : P2 Range (Bar) 1:6
Fluid : Water, compressed air
Type of Product : Ball Valve
Port Opening : Full Bore
Body Material : Stainless Steel
Stem : SS 316
Seat Type : Renewable PTFE Seat
Model No : SSBVS
Body Material cum standard : SS CF 8 M
End Details : Screwed Female BSP Taper Threads
Type of Ball : CF-8M/SS 316
Body Test Pressure : 100kg/cm²g Hyd.
Temperature : 45ºC Max
Material : Cast Iron
Type of Product : Water Meter
End Connection Type : Flanged
Body Test Pressure : 1.5 MPa Hyd.
Seat Test Pressure : 1.0 MPa Hyd.
Type of Product : Bronze Safety Valve
Disc Type : Renewable Disc
Seat Type : Integral
Trim : Cu-Alloy
Body Material : Bronze
Type of Product : Butterfly Valve with Electric Actuator
End Connection Type : Wafer Type
Body Test Pressure : 1.5 MPa (220Psig.) Hyd.
Model No : CIBFE
Pattern Type : Water Type
Body Material : Cast Iron
Class : PN 1.0
End Details : Suitable insertion between flanges as ASME B 16.1
Stem : AISI-410
Disc Material : Stainless Steel 304
Working Pressure : PN 16
Lining Material : EPDM
Seat Test Pressure : 1.10 MPa 160Psig.). Hyd
Type of Product : Electromagnetic Flow Meter
End Connection Type : Flanged
Flow Rate : 1m³/h=220
Pressure : PN 16
Type of Product : Single Plate Check Valve
Body Material : Ductile Iron
Disc Type : Carbon Steel + Ni Plate
Class : PN-16
Disc Material : Carbon Steel
Seat Type : EPDM
End Connection Type : Wafer Type
Body Test Pressure : 24kg/cm²g (Hyd.)
Seat Test Pressure : 16kg/cm²g (Hyd.)
Type of Product : Butterfly Valve with Pneumatic Actuator
End Connection Type : Wafer Type
Body Test Pressure : 1.5 MPa (220Psig.) Hyd.
Model No : CIBFP
Pattern Type : Water Type
Body Material : Cast Iron
Class : PN 1.0
End Details : Suitable insertion between flanges as per BS 10 Table
Stem : AISI-410
Disc Material : Stainless Steel 304
Working Pressure : PN 16
Lining Material : Nitrile/EPDM
Seat Test Pressure : 1.10 MPa 160Psig.). Hyd.
Type of Product : Ball Foot Valve
Strainer : Cast Iron to IS:210 FG 260
Body Material : Cast Iron
Class : PN16
Pattern Type : Y Type Pattern
Body Material cum standard : Cast Iron to IS:210 FG 200
Seat Ring : Nitrile Rubber
Type of Ball : MS Rubber Coated
Body Test Pressure : 2.4MPa (Hyd.)
Seat Test Pressure : 1.6MPa (Hyd.)
Working Pressure : 10.54kg/cm²g (150Psig.) Hyd.(For Water Lines)
Test Pressure : 21.09kg/cm²g (300Psig.) Hyd
Body Material : Cast Iron
Pattern Type : Y Type
End Details : Screwed female BSP Parallel threads to BS-21
Material : Cast Iron
Type of Product : Y Strainer
Trim : SS 304 Screen having 1.2mm perforation
Model No : CI 16
End Connection Type : Screwed
Type of Product : Butterfly Valve
Body Test Pressure : 3.0 MPa Hyd.
Model No : CR 27A
Pattern Type : Wafer Type
Body Material : Cast Iron
Class : PN20
End Details : Suitable insertion between Flanges as per BS-10 Table D/E or ASME B 16.1, Class-125
Stem : SS AISI-410
Operated By : Lever Operated
Disc Material : Stainless Steel 304
Lining Material : Nitrile/EPDM
Seat Test Pressure : 2.2 MPa Hyd
Type of Product : Check Valve
Body Material : Ductile Iron
Disc Type : SS 304 (CF-8)
Class : PN-25
Seat Type : EPDM Rubber Lining
Trim : Spring & Pins SS
Product Sub Type : Wafer Type
Body Test Pressure : 3.8 MPa Hyd
Seat Test Pressure : 2.7 MPa Hyd
Working Pressure : 20 Kg/cm²g Hyd.
Body Material : ASTM A106 Gr. B
End Details : Flanges Ends as per ASME B 16.5 CL-150 R.F.
Material : Mild Steel
Pressure : CL-150
Type of Product : Fabricated Y-Strainer Flanged
Model No : CI 16 D
Body Test Pressure : 30 Kg/cm²g Hyd.
Class : CL-150
Product Type : M.S. Fabricated Y-Strainer
Product Description : Bolted Bonnet
Screen : 40 Mesh SS 304
Type of Product : Butterfly Valve Wafer Type (Gear Operated)
Body Material : Cast Iron
End Details : Flanges As Asme B 16.1 Or Class -125
Pressure : PN16
Lining Material : EPDM
Seat Test Pressure : 1.8 MPa (Hyd.)
Type of Product : Butterfly Valve
Body Test Pressure : 2.4 MPa Hyd. (348 Psig.)
Model No : CR 28C
Pattern Type : Short Pattern
Body Material : Cast Iron
Class : PN 1.6
End Details : Suitable insertion between Flanges as per BS-10 Table D/E CI-125
Stem : AISI-304 Stainless Steel
Operated By : Lever Operated
Disc Material : CF-8M Stainless Steel
Seat Test Pressure : 1.6 MPa Hyd. (232 Psig.)
Seat Type : Renewable Seat
Disc Type : Renewable Disc
Type of Product : Single Post Full Lift Safety Valve
Trim : SS to AISI 304
Model No : CS 12
Pattern Type : Right Angle
Material : Cast Steel
Body Test Pressure : 53kg/cm²g Hyd
Outlet Flange : BS 10 Table-E
Inlet Flange : BS 10 Table-H
Maximum Working Temperature : 425°C
Maximum Working Pressure : 26.5kg/cm²g
Type of Product : Gate Valve
Disc Type : Solid Wedge
Seat Type : Integral Seat
Trim : Cu-Alloy
Pattern Type : Peglar Type PN-20
Body Material : Bronze
End Details : Screwed female BSP threads to BS-21
Body Test Pressure : 30.06kg/cm²g Hyd
Body Material cum standard : GM IS 318 Gr. LTB 2
Seat Test Pressure : 20.40kg/cm²g Hyd.
Temperature : < 50°C
Type of Product : Water Meter
Model No : WM 4
Pattern Type : Dry Dial, Fan Wheel, Multijet, Magnetic Drive Type
Body Material : Brass
Product Standard : Conforming to ISO 4064 Class-B
End Details : Screwed Female BSP Parallel Hose Union Ends
Body Test Pressure : 1.5 MPa Hyd.
Maximum Working Pressure : 1 MPa
Type of Product : Filter Valve (Y-Type Strainer)
Model No : BF
Working Pressure : 1.6 MPa (232 Psig.) Max.
Body Test Pressure : 2.4 MPa (348Psig.) Hyd.
Body Material : Forged Brass
Type of Product : Balancing Valve
Material : Cast Iron
Model No : SCBV
Trim : DI+EPDM
Maximum Operating Temperature : 120ºC
Body Material : Cast Iron IS: 200 Gr. FG 200
End Details : Flanged as per (PN 16/BS:EN-1092)
Stem : AISI 410
Pressure : PN-16
Body Test Pressure : 2.4 MPa Hyd (348 Psig). Hyd.
Seat Test Pressure : 1.6 MPa Hyd (232Psig). Hyd.
Type of Product : Bronze Globe Steam Stop Valve
Disc Type : Renewable Disc
Seat Type : Renewable Seat
Trim : SS AISI-410
Body Material : Bronze
Gland Packing : Graphited Asbestos
Type of Product : Brass Bib Tap
Test Pressure : 1.5MPa Hyd
Product Standard : IS-781
End Details : Male threads as per IS-554 (Parallel)
Type of Product : Steam Trap
Material : Bronze
Model No : IBR 20
End Connection Type : Screwed
Test Pressure : Tested to 500Psig. Hyd. (35.15 kg/cm² (Hyd.)
Working Pressure : Max. BOP 250Psig.(17.58kg/cm²) at 435ºF(225ºC)
End Details : Screwed female BSP Taper threads to BS-21
Trim : Stainless Steel AISI-410
Type of Product : Wedge Gate Sluice Valve
Model No : CR 19
Seat Test Pressure : 1.0 MPa Hyd
Trim : Cu-Alloy Seats, Stem SS AISI 410
Body Test Pressure : 1.5 MPa Hyd
Product Standard : Face to Face, flange dimensions as per IS-780
Seat Type : Renewable
Class : PN 1.0
End Details : Flanges as per IS-780/IS-1538 FF Drilled
Body Material : Cast Iron
Temperature : Temperature of water is not above 45° C
Type of Product : Water Meter
Class : Magnetic drive type
Model No : WM 2
Pattern Type : Dry Dial, Removable Machanism
Product Standard : Conforming to ISO 4064 Class-B
End Details : Flanges as per DIN 2533 RF(PN-16) Drilled
Body Test Pressure : 1.5 MPa Hyd.
Maximum Working Pressure : 1 MPa
Seat Type : Integral
Disc Type : Renewable Disc
Type of Product : Relief Valve
Trim : Cu-Alloy
Model No : IBR 21
Material : Gun metal
Seat Type : Integral
Disc Type : Renewable Disc
Type of Product : Safety Valve
Trim : Cu alloy
Model No : IBR 5
Material : Bronze
Type of Product : Wheel Operated Globe Valve
Seat Type : Integral seat
Trim : Cu-Alloy
Class : Class-2
Product Standard : IS-778
Material : Gun Metal
End Connection Type : Screwed
Body Test Pressure : 2.4MPa Hyd.
Seat Test Pressure : 1.6MPa Hyd.
Type of Product : Globe Valve
Seat Type : Integral seat
Trim : Cu-Alloy
Class : Class-1
Product Standard : IS-778
End Details : Screwed female threads IS-554 Parallel
End Connection Type : Screwed
Body Test Pressure : 1.5MPa Hyd.
Seat Test Pressure : 1.0MPa Hyd
Type of Product : Wheel Operated Gate Valve
Model No : IS 5
Seat Test Pressure : 1.6MPa Hyd
Trim : Cu-Alloy
Body Test Pressure : 2.4MPa Hyd
Product Standard : IS-778
Seat Type : Integral seat
Class : Class-2
Body Material : Gun Metal
Type of Product : Gun Metal Right Angle Globe Valve No. 4
Seat Type : Integral Seat
Trim : Cu-Alloy
Pattern Type : Angle Type
End Details : Screwed female threads BSP (Parallel
Body Test Pressure : 300 Psig. Hyd
Seat Test Pressure : 200 Psig. Hyd
Page 1 of 6 results
| Product Name | Specifications | Expected Price | Dispatch Time | Discount |
|---|---|---|---|---|
| Sant 40mm Forged Brass Float Valve FBV 5 | -- | ₹3,893 | 4 days | 1.72% OFF |
| Sant 15mm Brass Single Jet Water Meter WM 6 | Body Material Brass | End Details Screwed female BSP Parallel Hose Union Ends | ₹1,262 | 5 days | -- |
| Sant 3/4 Inch, 20 mm Forged Brass Ball Valve FBV 2 | Body Material Forged Brass | Body Test Pressure 40kg/cmg Hyd. | ₹754 | 4 days | 3.21% OFF |
| Sant 25mm Brass Water Meter WM 1 | -- | ₹6,843 | 4 days | 3.81% OFF |
| SANT 1/4 inch (8 mm) Stainless Steel Ball Valve, SSBVS | Body Material Stainless Steel | Body Material Cum Standard SS CF 8 M | ₹1,002 | 4 days | 13.25% OFF |
| Sant 12.7 mm (1/2 Inch), 15 mm Forged Brass Ball Valve FBV 2 | Body Material Forged Brass | Body Test Pressure 40kg/cmg Hyd. | ₹530 | 4 days | 3.46% OFF |
| Sant 15mm Brass Air Vent Valve AV | Class PN 1.6 | End Connection Type Spring Loaded | ₹730 | 4 days | 3.82% OFF |
| Sant 1 Inch, 25 mm Forged Brass Ball Valve FBV 2 | Body Material Forged Brass | Body Test Pressure 40kg/cmg Hyd. | ₹1,155 | 4 days | 4.07% OFF |
| Sant 25mm Forged Brass Filter Valve (Y-Type Strainer) BF | Body Material Forged Brass | Body Test Pressure 2.4 MPa (348Psig.) Hyd. | ₹1,277 | 4 days | -- |
| Sant 15 mm Stainless Steel Stainless Steel Steam Trap IC-3 | Body Test Pressure 63.3 kg/cm 900 Psig. (Hyd.) | End Connection Type Screwed | ₹2,241 | 4 days | 3.82% OFF |
Subscribe to Newsletter
Sign up to get exclusive offers from our favorite brands and to be well up in the news
