Showing 40 out of 225 products
Type of Product : Ball Valve
Port Opening : Full Bore
Body Material : Stainless Steel
Stem : SS 316
Seat Type : Renewable PTFE Seat
Model No : SSBVS
Body Material cum standard : SS CF 8 M
End Details : Screwed Female BSP Taper Threads
Type of Ball : CF-8M/SS 316
Body Test Pressure : 100kg/cm²g Hyd.
Type of Product : Pressure Reducing Valve
Model No : PRV
Material : Forged Brass
Body Test Pressure : 16barg Hyd. (232Psig. Hyd.)
Max. Inlet Pressure P1(bar) : 16 barg
Outlet Pressure : P2 Range (Bar) 1:6
Fluid : Water, compressed air
Type of Product : Stainless Steel Steam Trap
Material : Stainless Steel
Model No : IC-3
Body Test Pressure : 63.3 kg/cm² 900 Psig. (Hyd.)
End Connection Type : Screwed
Working Pressure : Suitable for 450 Psig. (31.65 kg/cm²)
Trim : AISI 420
Maximum Temperature : 400ºC (750ºF)
Type of Product : Air Vent Valve
Material : Brass
Model No : AV
End Connection Type : Spring Loaded
Temperature : 100°C Max.
Class : PN 1.6
Related Searches
Type of Product : Gun Metal Foot Valve
Model No : IS 21
End Connection Type : Screwed
Seat Type : Integral seat
Test Pressure : 300 Psig. Hyd
Model No : FBV 5
Body Material : Forged Brass
End Connection Type : Screwed
Body Test Pressure : 1.05 MPa
Type of Product : Butterfly Valve with Pneumatic Actuator
End Connection Type : Wafer Type
Body Test Pressure : 1.5 MPa (220Psig.) Hyd.
Model No : CIBFP
Pattern Type : Water Type
Body Material : Cast Iron
Class : PN 1.0
End Details : Suitable insertion between flanges as per BS 10 Table
Stem : AISI-410
Disc Material : Stainless Steel 304
Working Pressure : PN 16
Lining Material : Nitrile/EPDM
Seat Test Pressure : 1.10 MPa 160Psig.). Hyd.
Type of Product : Butterfly Valve with Electric Actuator
End Connection Type : Wafer Type
Body Test Pressure : 1.5 MPa (220Psig.) Hyd.
Model No : CIBFE
Pattern Type : Water Type
Body Material : Cast Iron
Class : PN 1.0
End Details : Suitable insertion between flanges as ASME B 16.1
Stem : AISI-410
Disc Material : Stainless Steel 304
Working Pressure : PN 16
Lining Material : EPDM
Seat Test Pressure : 1.10 MPa 160Psig.). Hyd
Type of Product : Ball Foot Valve
Strainer : Cast Iron to IS:210 FG 260
Body Material : Cast Iron
Class : PN16
Pattern Type : Y Type Pattern
Body Material cum standard : Cast Iron to IS:210 FG 200
Seat Ring : Nitrile Rubber
Type of Ball : MS Rubber Coated
Body Test Pressure : 2.4MPa (Hyd.)
Seat Test Pressure : 1.6MPa (Hyd.)
Type of Product : Balancing Valve
Material : Cast Iron
Model No : SCBV
Trim : DI+EPDM
Maximum Operating Temperature : 120ºC
Body Material : Cast Iron IS: 200 Gr. FG 200
End Details : Flanged as per (PN 16/BS:EN-1092)
Stem : AISI 410
Pressure : PN-16
Body Test Pressure : 2.4 MPa Hyd (348 Psig). Hyd.
Seat Test Pressure : 1.6 MPa Hyd (232Psig). Hyd.
Type of Product : Butterfly Valve Wafer Type (Gear Operated)
Body Material : Cast Iron
End Details : Flanges As Asme B 16.1 Or Class -125
Pressure : PN16
Lining Material : EPDM
Seat Test Pressure : 1.8 MPa (Hyd.)
Type of Product : Bronze Safety Valve
Disc Type : Renewable Disc
Seat Type : Integral
Trim : Cu-Alloy
Body Material : Bronze
Type of Product : Butterfly Valve
Body Test Pressure : 3.0 MPa Hyd.
Model No : CR 27A
Pattern Type : Wafer Type
Body Material : Cast Iron
Class : PN20
End Details : Suitable insertion between Flanges as per BS-10 Table D/E or ASME B 16.1, Class-125
Stem : SS AISI-410
Operated By : Lever Operated
Disc Material : Stainless Steel 304
Lining Material : Nitrile/EPDM
Seat Test Pressure : 2.2 MPa Hyd
Type of Product : Single Plate Check Valve
Body Material : Ductile Iron
Disc Type : Carbon Steel + Ni Plate
Class : PN-16
Disc Material : Carbon Steel
Seat Type : EPDM
End Connection Type : Wafer Type
Body Test Pressure : 24kg/cm²g (Hyd.)
Seat Test Pressure : 16kg/cm²g (Hyd.)
Working Pressure : 20 Kg/cm²g Hyd.
Body Material : ASTM A106 Gr. B
End Details : Flanges Ends as per ASME B 16.5 CL-150 R.F.
Material : Mild Steel
Pressure : CL-150
Type of Product : Fabricated Y-Strainer Flanged
Model No : CI 16 D
Body Test Pressure : 30 Kg/cm²g Hyd.
Class : CL-150
Product Type : M.S. Fabricated Y-Strainer
Product Description : Bolted Bonnet
Screen : 40 Mesh SS 304
Type of Product : Brass Bib Tap
Test Pressure : 1.5MPa Hyd
Product Standard : IS-781
End Details : Male threads as per IS-554 (Parallel)
Type of Product : Butterfly Valve
Body Test Pressure : 2.4 MPa Hyd. (348 Psig.)
Model No : CR 28C
Pattern Type : Short Pattern
Body Material : Cast Iron
Class : PN 1.6
End Details : Suitable insertion between Flanges as per BS-10 Table D/E CI-125
Stem : AISI-304 Stainless Steel
Operated By : Lever Operated
Disc Material : CF-8M Stainless Steel
Seat Test Pressure : 1.6 MPa Hyd. (232 Psig.)
Working Pressure : Max. BOP 350 Psig. at 400ºC
Test Pressure : 700 Psig. Hyd. 49.23kg/cm²g
Body Material : Cast Steel
Pattern Type : Y-Type
End Details : Flanges as per BS 10 Table J FF undrilled
Material : Cast Steel
Type of Product : Y Strainer
Trim : SS (Type 304) Screen having 1.2mm dia perforation
Model No : CS 3
End Connection Type : Flanged
Type of Product : Gate Valve
Disc Type : Solid Wedge
Seat Type : Integral Seat
Trim : Cu-Alloy
Pattern Type : Peglar Type PN-20
Body Material : Bronze
End Details : Screwed female BSP threads to BS-21
Body Test Pressure : 30.06kg/cm²g Hyd
Body Material cum standard : GM IS 318 Gr. LTB 2
Seat Test Pressure : 20.40kg/cm²g Hyd.
Type of Product : Bronze Globe Steam Stop Valve
Disc Type : Renewable Disc
Seat Type : Renewable Seat
Trim : SS AISI-410
Body Material : Bronze
Gland Packing : Graphited Asbestos
Type of Product : Globe Valve
Seat Type : Integral seat
Trim : Cu-Alloy
Class : Class-1
Product Standard : IS-778
End Details : Screwed female threads IS-554 Parallel
End Connection Type : Screwed
Body Test Pressure : 1.5MPa Hyd.
Seat Test Pressure : 1.0MPa Hyd
Type of Product : Steam Trap
Material : Bronze
Model No : IBR 20
End Connection Type : Screwed
Test Pressure : Tested to 500Psig. Hyd. (35.15 kg/cm² (Hyd.)
Working Pressure : Max. BOP 250Psig.(17.58kg/cm²) at 435ºF(225ºC)
End Details : Screwed female BSP Taper threads to BS-21
Trim : Stainless Steel AISI-410
Type of Product : Stop Cum Non Return Valve
Working Pressure : Max BOP 13kgf/cm²g at 220ºC Steam
Body Material : Cast Iron
Product Standard : BS-5152
Disc Type : Renewable Disc
Pattern Type : Straight Type / Right Angle
Seat Type : Renewable
Trim : AISI-410 Stainless Steel
Type of Product : Ball Valve
Trim : AISI 410 Stem Stainless Steel AISI 304 Ball
Body Material : Cast Iron
Product Standard : IS-9890 -1981 Class-125
Seat Type : Renewable Teflon Seat
Model No : CI 18
Body Test Pressure : 21barg 300Psig. Hyd.
Seat Test Pressure : 220Psig.(15.4barg) Hyd. & 100Psig. (6.9 bar)
End Connection Type : Flanged
Type of Product : Check Valve
Body Material : Ductile Iron
Disc Type : SS 304 (CF-8)
Class : PN-25
Seat Type : EPDM Rubber Lining
Trim : Spring & Pins SS
Product Sub Type : Wafer Type
Body Test Pressure : 3.8 MPa Hyd
Seat Test Pressure : 2.7 MPa Hyd
Seat Type : Integral
Disc Type : Renewable Disc
Type of Product : Relief Valve
Trim : Cu-Alloy
Model No : IBR 21
Material : Gun metal
Seat Type : Integral
Disc Type : Renewable Disc
Type of Product : Safety Valve
Trim : Cu alloy
Model No : IBR 5
Material : Bronze
Type of Product : Wheel Operated Gate Valve
Model No : IS 5
Seat Test Pressure : 1.6MPa Hyd
Trim : Cu-Alloy
Body Test Pressure : 2.4MPa Hyd
Product Standard : IS-778
Seat Type : Integral seat
Class : Class-2
Body Material : Gun Metal
Type of Product : Gun Metal Ferrule
Test Pressure : 1.5MPa Hyd,1.0MPa Hyd.
Product Standard : IS-2692
End Details : Screwed male BSP Taper to IS-554
Type of Product : Wheel Operated Globe Valve
Seat Type : Integral seat
Trim : Cu-Alloy
Class : Class-2
Product Standard : IS-778
Material : Gun Metal
End Connection Type : Screwed
Body Test Pressure : 2.4MPa Hyd.
Seat Test Pressure : 1.6MPa Hyd.
Type of Product : Gun Metal Right Angle Globe Valve No. 4
Seat Type : Integral Seat
Trim : Cu-Alloy
Pattern Type : Angle Type
End Details : Screwed female threads BSP (Parallel
Body Test Pressure : 300 Psig. Hyd
Seat Test Pressure : 200 Psig. Hyd
Type of Product : Ball Valve
Trim : Stem SS AISI 410 Ball SS 304/CF8
Port Opening : Standard Bore
Body Material : Gun Metal
Seat Type : Renewable PTFE Seats
Model No : IS 20
Body Test Pressure : 500Psig. Hyd
Seat Test Pressure : 500Psig. Hyd.
End Connection Type : Screwed
Type of Product : Wheel Operated Globe Valve
Disc Type : Renewable Disc
Seat Type : Renewable
Trim : SS-410
Working Pressure : Max BOP 13kg/cm²g at 220°C Steam
Pattern Type : Straight Pattern
Class : PN-16
Product Standard : BS 5152/ DIN 86251
Material : Cast Iron
End Connection Type : Flanged
Body Test Pressure : 26kg/cm²g
Seat Test Pressure : 17kg/cm²g Hyd
Type of Product : Bronze Fusible Plug
Test Pressure : Tested to 500Psig. Hyd. (35.15 kg/cm² (Hyd.)
Working Pressure : Max. BOP 250Psig.(17.58kg/cm²) at 435ºF(225ºC)
Pattern Type : Two piece design
End Details : Screwed male BSP Taper thread to BS-21
Working Pressure : 10.54kg/cm²g (150Psig.) Hyd.(For Water Lines)
Test Pressure : 21.09kg/cm²g (300Psig.) Hyd
Body Material : Cast Iron
Pattern Type : Y Type
End Details : Screwed female BSP Parallel threads to BS-21
Material : Cast Iron
Type of Product : Y Strainer
Trim : SS 304 Screen having 1.2mm perforation
Model No : CI 16
End Connection Type : Screwed
Body Material : Cast Iron
Pattern Type : Y Type
End Details : Flanges as per BS 10 Table F undrilled
Material : Cast Iron
Type of Product : Y Strainer
Trim : S.S. Screen/SS 304 having 1.2mm perforation
Model No : CI 16B
Body Test Pressure : 21.09kg/cm²g (300Psig.) Hyd.(For Water Line)
End Connection Type : Flanged
Type of Product : Ball Valve
Trim : Stem, Ball Stainless Steel AISI-304
Body Material : Stainless Steel 304
Class : PN-40
Seat Type : Renewable Teflon
Model No : IC-1
Body Test Pressure : 60kg/cm² Hyd
Seat Test Pressure : 40kg/cm² Hyd
End Connection Type : Screwed
Page 1 of 6 results
| Product Name | Expected Price | Dispatch Time | Discount |
|---|---|---|---|
| Chubu Corporation SUS Floor Drain Trap for Waterproof Layer, T5B-A(SU)-75 | ₹51,919 | 30 days | -- |
| Chubu Corporation Floor Cleaning Port for Non Waterproof Layer 45398309, COA-A 150 | ₹31,859 | 30 days | -- |
| Chubu Corporation Floor Cleaning Port for Waterproof Layer, COB-A 100 | ₹22,419 | 30 days | -- |
| Finolex 203.2 mm (8 Inch) PVC, EPDM Wafer Type Butterfly Valve, 2316 | ₹9,675 | 4 days | 12.27% OFF |
| DKC Size 150 VP PVC Straight Pipe Single Screw 45414829, VPS-150-L500 | ₹8,495 | 30 days | -- |
| Zoloto 80 mm Flanged Cast Iron Sluice Valve 1079 B | ₹13,637 | 7 days | -- |
| Chubu Corporation Floor Cleaning Port for Non-waterproof Layer, COA-A-100 | ₹14,159 | 30 days | -- |
| Chubu Corporation SUS Floor Drain Trap for Non Waterproof Layer 45398318, T5A-A(SU)-75 | ₹46,019 | 30 days | -- |
| DKC RL-4S Type Roof Drain Size 150 for Outdoor Use 58184917, RL-4S-K | ₹33,039 | 30 days | -- |
Subscribe to Newsletter
Sign up to get exclusive offers from our favorite brands and to be well up in the news
