Filter

Categories
Price Range
Min Price:
Max Price:
₹
-
₹
Discount
Express Shipping

Spac Hydraulic Pneumatic Cylinder

Showing 40 out of 4865 products

Sort by
₹5,899   ₹9,447
You save ₹3,548!
37.56% OFF
Spac Double Ended Non Magnetic Cylinder 900x32 mm is a mechanical device that transfers power from one place to another. The pneumatic cylinder is powered by compressed gas and moves a piston inside the cylinder in a back-and-forth motion. These devices are used in many different areas of industry but are most commonly used to open or close a door. This is because pneumatic cylinders have a high force output, even when compared to other types of cylinders. The simplest type of pneumatic cylinder uses an unbalanced piston to create the force needed to move the device to it is attached. This type of cylinder is not very efficient because much more energy is required to compress the gas than is produced by the device itself. This type of air cylinder should be avoided whenever possible due to the overall inefficiency of this system. More advanced cylinders use linear motors or solenoids to create pressure inside the cylinder, moving a piston connected by a rod or cables. These cylinders are more efficient than their unbalanced counterparts, as they only require as much power as needed to move the desired object. General applications for these cylinders include construction equipment such as cranes, presses, and lifts. Features Conforms to ISO:15552 (Previously ISO:6431) Configuration with or without magnet Available in single and double acting configuration Available in single and through the rod configuration Wide variety of seals available (NBR) Polyurethane, (Viton) Non-corrosive stainless steel piston rod Extensive range of accessories for mounting the cylinder in various positions Low friction operation, hence longer service life
₹3,067   ₹4,942
You save ₹1,875!
37.94% OFF
Spac Double Ended Non Magnetic Cylinder 200x32 mm are mechanical devices used for transferring power from one place to another. The pneumatic cylinder is powered by compressed gas and moves a piston inside the cylinder in a back-and-forth motion. These devices are used in many different areas of industry but are most commonly used as a means of opening or closing a door. This is due to the fact that pneumatic cylinders have a high force output, even when compared to other types of cylinders. The simplest type of pneumatic cylinder uses an unbalanced piston to create the force needed to move the device to it is attached. This type of cylinder is not very efficient, due to the fact that much more energy is required to compress the gas than is produced by the device itself. This type of air cylinder should be avoided whenever possible, due to the overall inefficiency of this system. More advanced cylinders use linear motors or solenoids to create pressure inside the cylinder, which then moves a piston connected by a rod or cables. These cylinders are more efficient than their unbalanced counterparts, as they only require as much power as needed to actually move the desired object. General applications for these types of cylinders include construction equipment such as cranes, presses, and lifts. Features Conforms to ISO:15552 (Previously ISO:6431) Configuration with or without magnet Available in single and double acting configuration Available in single and through the rod configuration Wide variety of seals available (NBR) Polyurethane, (Viton) Non-corrosive stainless steel piston rod Extensive range of accessories for mounting the cylinder in various positions Low friction operation, hence longer service life
₹3,421   ₹5,508
You save ₹2,087!
37.89% OFF
Spac Double Ended Non Magnetic Cylinder 300x32 mm are mechanical devices used for transferring power from one place to another. The pneumatic cylinder is powered by compressed gas and moves a piston inside the cylinder in a back-and-forth motion. These devices are used in many different areas of industry but are most commonly used as a means of opening or closing a door. This is due to the fact that pneumatic cylinders have a high force output, even when compared to other types of cylinders. The simplest type of pneumatic cylinder uses an unbalanced piston to create the force needed to move the device to it is attached. This type of cylinder is not very efficient, due to the fact that much more energy is required to compress the gas than is produced by the device itself. This type of air cylinder should be avoided whenever possible, due to the overall inefficiency of this system. More advanced cylinders use linear motors or solenoids to create pressure inside the cylinder, which then moves a piston connected by a rod or cables. These cylinders are more efficient than their unbalanced counterparts, as they only require as much power as needed to actually move the desired object. General applications for these types of cylinders include construction equipment such as cranes, presses, and lifts. Features Conforms to ISO:15552 (Previously ISO:6431) Configuration with or without magnet Available in single and double acting configuration Available in single and through the rod configuration Wide variety of seals available (NBR) Polyurethane, (Viton) Non-corrosive stainless steel piston rod Extensive range of accessories for mounting the cylinder in various positions Low friction operation, hence longer service life
₹12,979   ₹20,633
You save ₹7,654!
37.1% OFF
Spac Double Ended Non Magnetic Cylinder 700x80 mm is a mechanical device that transfers power from one place to another. The pneumatic cylinder is powered by compressed gas and moves a piston inside the cylinder in a back-and-forth motion. These devices are used in many different areas of industry but are most commonly used to open or close a door. This is because pneumatic cylinders have a high force output, even when compared to other types of cylinders. The simplest type of pneumatic cylinder uses an unbalanced piston to create the force needed to move the device to it is attached. This type of cylinder is not very efficient because much more energy is required to compress the gas than is produced by the device itself. This type of air cylinder should be avoided whenever possible due to the overall inefficiency of this system. More advanced cylinders use linear motors or solenoids to create pressure inside the cylinder, moving a piston connected by a rod or cables. These cylinders are more efficient than their unbalanced counterparts, as they only require as much power as needed to move the desired object. General applications for these cylinders include construction equipment such as cranes, presses, and lifts. Features Conforms to ISO:15552 (Previously ISO:6431) Configuration with or without magnet Available in single and double acting configuration Available in single and through the rod configuration Wide variety of seals available (NBR) Polyurethane, (Viton) Non-corrosive stainless steel piston rod Extensive range of accessories for mounting the cylinder in various positions Low friction operation, hence longer service life
₹7,315   ₹12,116
You save ₹4,801!
39.63% OFF
Spac Non-Magnetic Cylinder 63 x 750 mm is a mechanical device that transfers power from one place to another. The pneumatic cylinder is powered by compressed gas and moves a piston inside the Cylinder in a back-and-forth motion. These devices are used in many different areas of industry but are most commonly used to open or close a door. This is because pneumatic Cylinders have a high force output, even when compared to other Cylinders. The simplest type of pneumatic cylinder uses an unbalanced piston to create the force needed to move the device to it is attached. This type of cylinder is inefficient because more energy is required to compress the gas than the machine produces. This type of air cylinder should be avoided whenever possible due to the overall inefficiency of this system. More advanced Cylinders use linear motors or solenoids to create pressure inside the cylinder, moving a piston connected by a rod or cables. These Cylinders are more efficient than their unbalanced counterparts, as they only require as much power as needed to move the desired object. General applications for these Cylinders include construction equipment such as cranes, presses, and lifts. Features Conforms to ISO:15552 (Previously ISO:6431) Configuration with or without magnet Available in single and double acting configuration Available in single and through the rod configuration Wide variety of seals available (NBR) Polyurethane (Viton) Non-corrosive stainless steel piston rod Extensive range of accessories for mounting The Cylinder in various positions Low friction operation, hence longer service life
₹14,159   ₹22,230
You save ₹8,071!
36.31% OFF
Spac Double Ended Non Magnetic Cylinder 125x125 mm are mechanical devices used for transferring power from one place to another. The pneumatic cylinder is powered by compressed gas and moves a piston inside the cylinder in a back-and-forth motion. These devices are used in many different areas of industry but are most commonly used as a means of opening or closing a door. This is due to the fact that pneumatic cylinders have a high force output, even when compared to other types of cylinders. The simplest type of pneumatic cylinder uses an unbalanced piston to create the force needed to move the device to it is attached. This type of cylinder is not very efficient, due to the fact that much more energy is required to compress the gas than is produced by the device itself. This type of air cylinder should be avoided whenever possible, due to the overall inefficiency of this system. More advanced cylinders use linear motors or solenoids to create pressure inside the cylinder, which then moves a piston connected by a rod or cables. These cylinders are more efficient than their unbalanced counterparts, as they only require as much power as needed to actually move the desired object. General applications for these types of cylinders include construction equipment such as cranes, presses, and lifts. Features Conforms to ISO:15552 (Previously ISO:6431) Configuration with or without magnet Available in single and double acting configuration Available in single and through the rod configuration Wide variety of seals available (NBR) Polyurethane, (Viton) Non-corrosive stainless steel piston rod Extensive range of accessories for mounting the cylinder in various positions Low friction operation, hence longer service life
₹14,159   ₹23,670
You save ₹9,511!
40.18% OFF
Spac Double Ended Non Magnetic Cylinder 150x125 mm are mechanical devices used for transferring power from one place to another. The pneumatic cylinder is powered by compressed gas and moves a piston inside the cylinder in a back-and-forth motion. These devices are used in many different areas of industry but are most commonly used as a means of opening or closing a door. This is due to the fact that pneumatic cylinders have a high force output, even when compared to other types of cylinders. The simplest type of pneumatic cylinder uses an unbalanced piston to create the force needed to move the device to it is attached. This type of cylinder is not very efficient, due to the fact that much more energy is required to compress the gas than is produced by the device itself. This type of air cylinder should be avoided whenever possible, due to the overall inefficiency of this system. More advanced cylinders use linear motors or solenoids to create pressure inside the cylinder, which then moves a piston connected by a rod or cables. These cylinders are more efficient than their unbalanced counterparts, as they only require as much power as needed to actually move the desired object. General applications for these types of cylinders include construction equipment such as cranes, presses, and lifts. Features Conforms to ISO:15552 (Previously ISO:6431) Configuration with or without magnet Available in single and double acting configuration Available in single and through the rod configuration Wide variety of seals available (NBR) Polyurethane, (Viton) Non-corrosive stainless steel piston rod Extensive range of accessories for mounting the cylinder in various positions Low friction operation, hence longer service life
₹3,893   ₹6,304
You save ₹2,411!
38.24% OFF
Spac Double Ended Non Magnetic Cylinder 125x50 mm are mechanical devices used for transferring power from one place to another. The pneumatic cylinder is powered by compressed gas and moves a piston inside the cylinder in a back-and-forth motion. These devices are used in many different areas of industry but are most commonly used as a means of opening or closing a door. This is due to the fact that pneumatic cylinders have a high force output, even when compared to other types of cylinders. The simplest type of pneumatic cylinder uses an unbalanced piston to create the force needed to move the device to it is attached. This type of cylinder is not very efficient, due to the fact that much more energy is required to compress the gas than is produced by the device itself. This type of air cylinder should be avoided whenever possible, due to the overall inefficiency of this system. More advanced cylinders use linear motors or solenoids to create pressure inside the cylinder, which then moves a piston connected by a rod or cables. These cylinders are more efficient than their unbalanced counterparts, as they only require as much power as needed to actually move the desired object. General applications for these types of cylinders include construction equipment such as cranes, presses, and lifts. Features Conforms to ISO:15552 (Previously ISO:6431) Configuration with or without magnet Available in single and double acting configuration Available in single and through the rod configuration Wide variety of seals available (NBR) Polyurethane, (Viton) Non-corrosive stainless steel piston rod Extensive range of accessories for mounting the cylinder in various positions Low friction operation, hence longer service life
₹4,247   ₹6,992
You save ₹2,745!
39.25% OFF
Spac Magnetic Cylinder 32x800 mm is a mechanical device that transfers power from one place to another. The pneumatic Cylinder is powered by compressed gas and moves a piston inside the Cylinder in a back-and-forth motion. These devices are used in many different areas of industry but are most commonly used to open or close a door. This is because pneumatic Cylinders have a high force output, even when compared to other Cylinders. The simplest type of pneumatic Cylinder uses an unbalanced piston to create the force needed to move the device to it is attached. This type of Cylinder is inefficient because more energy is required to compress the gas than the machine produces. This type of air Cylinder should be avoided whenever possible due to the overall inefficiency of this system. More advanced Cylinders use linear motors or solenoids to create pressure inside the Cylinder, moving a piston connected by a rod or cables. These Cylinders are more efficient than their unbalanced counterparts, as they only require as much power as needed to move the desired object. General applications for these Cylinders include construction equipment such as cranes, presses, and lifts. Features Conforms to ISO:15552 (Previously ISO:6431) Configuration with or without magnet Available in single and double acting configuration Available in single and through the rod configuration Wide variety of seals available (NBR) Polyurethane, (Viton) Non-corrosive stainless steel piston rod Extensive range of accessories for mounting the Cylinder in various positions Low friction operation, hence longer service life
Recommended Items
sku-leadTime Ships within 10 days
oos-available Ships within 24 hrs
oos-available Ships within 24 hrs
oos-available Ships within 24 hrs
oos-available Ships within 24 hrs
oos-available Ships within 24 hrs
oos-available Ships within 24 hrs
oos-available Ships within 24 hrs
oos-available Ships within 24 hrs
oos-available Ships within 24 hrs
oos-available Ships within 24 hrs
oos-available Ships within 24 hrs
oos-available Ships within 24 hrs
Browsing History
sku-leadTime Ships within 5 days
sku-leadTime Ships within 7 days
sku-leadTime Ships within 3 days
sku-leadTime Ships within 7 days
sku-leadTime Ships within 10 days
sku-leadTime Ships within 3 days
sku-leadTime Ships within 6 days
₹44,099 ₹54,600
19.23% OFF