Have a question? Call us now at +91 9650660070

Uxcell Metal Pipe Fittings

Showing 27 out of 27 products

Sort by

Uxcell 3/4 X 1/2 Inch Nipple,Reducer Connector

Ships within 2 days

Uxcell 3/4 X 1/2 Inch Nipple,Reducer Connector

By Uxcell

₹247

The Uxcell 3/4 X 1/2 Inch Connector is a quick-release connector with an integrated pin that is used to connect two rods that are 3/4 inch in diameter or smaller. It has a single hole on the side of the body through which a pin can be secured with a bolt or screw.It is easy to connect and disconnect, can be used to join two pipes together. It has a wide range of applications such as in building, automotive and hardware repair. This standard-size connector fits a number of applications, including cell phones, computers, and other electronics. It is made of nickel plated brass for its durability and has a threaded hex nut for easy installation. The product has an inside diameter of 0.75 inches (1.905 cm) and outside diameter of 0.847 inches (2.135 cm). It weighs about 0.12 pounds (0.05 kg). It features a zinc-plated finish, which protects it from corrosion and other forms of degradation. This connector is designed to connect two pieces of steel tubing together, creating a durable and structurally sound pipe. The black band indicates that the hole inside is 1/2" while the white one indicates that it will fit a 3/4" connection. The product is made out of polypropylene, which is a thermoplastic polymer commonly used in plumbing fittings, like washers and connectors. The plastic it is made out of makes it flexible and easy to use, but also durable so that it can withstand harsh environments.

Uxcell 1 X 1/2 Inch Reducer Hex Nipple-Pack of 4 Pieces

Ships within 2 days

Uxcell 1 X 1/2 Inch Reducer Hex Nipple-Pack of 4 Pieces

By Uxcell

₹766

Uxcell 1 X 1/2 Inch Reducer Hex Nipple-Pack of 4 is a good product with an end use of a machine that uses highly compressed air. It has a great purpose, and also a good quality. This is a self-locking type reducer that can be used with the ground rod or pipe fittings. The material is made from brass that provides high strength and durability. It has a nickel plating that makes it corrosion resistant and provide long lasting protection against rust and corrosion. Its adapter allows you to change the size of 3/4 inch threaded pipe to 1 inch threaded pipe, making it perfect for connecting two pieces of pipe, or attaching a faucet to a sink. It has a hexagonal shape and its body is made of brass. It has a male thread on one end and female thread on the other end, allowing you to connect it to pipes with either style of thread. The brass material allows it to fit securely into both PVC and CPVC pipes without the need for primer or cement. Each piece has an outside diameter of 1/2 inch and an inside diameter of 1/2 inch. The material itself is resistant to rust and corrosion and can withstand temperatures up to 315 degrees fahrenheit, making it resistant to everything from exposure to salt water to high temperatures.

Uxcell 3/8 X 1/4 Inch Reducer Hex Nipple-Pack of 10

Ships within 2 days

Uxcell 3/8 X 1/4 Inch Reducer Hex Nipple-Pack of 10

By Uxcell

₹719

Uxcell 3/8 X 1/4 Inch Reducer Hex Nipple-Pack of 10 These are designed for connecting 3/8 inch standard threaded PVC or CPVC pipes to form a smooth transition between two different sizes of piping. They are made from durable zinc for long lasting performance.They are used in plumbing systems, irrigation systems, and solar water heating systems. These uxcell reducing pipe fittings are made of high-quality zinc alloy and they will not corrode or rust. These are used for connecting two pieces of pipe together to reduce the size of the pipe, and each nipple is made of stainless steel and will not rust. t is made of steel and is coated in red oxide. The threading on the outside measures 1/4 inch, while the inside diameter is 3/8 inch. The nipple has a hexagonal base that firmly screws into the pipe while keeping the threads tight. e product weighs around 1.95 pounds and has a shipping weight of 4 pounds, making it easy to handle and move around. It has a package quantity of 10. The overall length for this product is 0.01 inches, with a maximum diameter of 0.01 inches and a minimum diameter of 0.01 inches. This reducer nipple is designed to fit a 3/8" outside diameter pipe, and has a 1/4" inside diameter. This nipple is compatible with standard hex nuts and can be coupled with other male or female threaded components from Uxcell such as insert nuts.

Uxcell 1/8 X 3/8 Inch Reducer Hex Nipple-Pack of 10

Ships within 2 days

Uxcell 1/8 X 3/8 Inch Reducer Hex Nipple-Pack of 10

By Uxcell

₹848

This item is the Reducer Hex Nipple - 1/8" x 3/8" BSP Male Connector Zinc Finish Plating 10Pcs. It can be used to connect two pipes of the same diameter and different length. The inner diameter of this connector is 0.188", and it's made from zinc alloy. his reducer hex nipple is 1/8 inches x 3/8 inches, making it perfect for projects requiring a 1/4 inch hex nipple with a 3/8 inch diameter. Its zinc finish provides corrosion resistance and an attractive look. It is a reducing pipe fitting, which is used to connect two pipes of different size. Made of zinc alloy, this reducer hex nipple is plating with zinc finish and has a sturdy structure. With its large diameter, it can effectively prevent leakage. Moreover, it can be fitted to the pipe without using a gasket. The product is zinc plated and has a male BSP connection on both sides. The size of the pipe is measured by the outside diameter (pipes measure their inside diameter differently). The threading on the outside of this fitting is G1/8 BSP, meaning it has a 19mm male thread with a 24mm female thread, while the inside threading measures 1/8 X 3/8.

Uxcell 3/4 X 1/2 Inch Reducer Hex Nipple-Pack of 4

Ships within 2 days

Uxcell 3/4 X 1/2 Inch Reducer Hex Nipple-Pack of 4

By Uxcell

₹624

Uxcell 3/4 X 1/2 Inch Reducer Hex Nipple-Pack of 4 is a good product with an end use of a machine that uses highly compressed air. It has a great purpose, and also a good quality. This is a self-locking type reducer that can be used with the ground rod or pipe fittings. The material is made from brass that provides high strength and durability. It has a nickel plating that makes it corrosion resistant and provide long lasting protection against rust and corrosion. Its adapter allows you to change the size of 3/4 inch threaded pipe to 1/2 inch threaded pipe, making it perfect for connecting two pieces of pipe, or attaching a faucet to a sink. It has a hexagonal shape and its body is made of brass. It has a male thread on one end and female thread on the other end, allowing you to connect it to pipes with either style of thread. The brass material allows it to fit securely into both PVC and CPVC pipes without the need for primer or cement. Each piece has an outside diameter of 3/4 inch and an inside diameter of 1/2 inch. The material itself is resistant to rust and corrosion and can withstand temperatures up to 315 degrees fahrenheit, making it resistant to everything from exposure to salt water to high temperatures.

Uxcell 3/8 Inch Hose Fitting Connector-Pack of 3

Ships within 3 days

Uxcell 3/8 Inch Hose Fitting Connector-Pack of 3

By Uxcell

₹1,415

Uxcell 3/8 Inch Hose Fitting Connector-Pack of 3 is a connector that enables you to connect two pieces of flexible tubing together. The Uxcell 3/8 Inch Hose Fitting Connector is made out of brass and is designed to connect two sections of hose. It features a 9/16-inch outer diameter and a 7/8-inch inner diameter, as well as a coarse thread that will work with most standard plumbing applications. This hose fitting connector is made from strong and durable plastic that will last for years. It features a standard female garden hose thread size, so you can easily attach your hose to it and get straight to watering your plants. It also comes with an easy-on and easy-off design for quick and simple installation. Plus, the connector has an anti-leak seal that prevents water from leaking through the joint, which reduces waste and helps save water. This item can be used in both cold and hot water applications and is made of PVC plastic. They're made of durable plastic and fit easily onto standard 3/8" garden hoses. . The connectors are made of brass material, and the fittings are made of nickel plated brass. The connectors and fittings are connected by a hexagonal shape, which helps them fit tightly together. These connectors have a wide variety of uses, including for gardening, watering plants, and for spraying water.

Uxcell 1/4 Inch Hose Fitting Connector-Pack of 2

Ships within 3 days

Uxcell 1/4 Inch Hose Fitting Connector-Pack of 2

By Uxcell

₹719

Uxcell 1/4 Inch Hose Fitting Connector-Pack of 2 is a water hose connector. It can be used to connect different sizes or types of garden hoses. The product includes one male connector and one female connector. Both connectors are made of brass material to ensure strength and durability. The connectors have plastic housing that prevents rusting and ensures smooth operation. he connector is compatible with 3/4 inch female thread, 1/4 inch male thread and 5/8 inch male thread. It has a nickel finish for enhanced aesthetics. his Uxcell 1/4 inch hose fitting connector pack of 2 can be used with a variety of equipment and is perfect for home or office. The ability to connect two hoses together makes this a versatile option that can be used in many different ways around the house or office. The leak-proof design ensures that you can rely on this piece for a long time to come without worrying about it bursting or leaking at any point. The connector is made from metal and the threading has a nice smooth finish. With just a quarter inch of space between two connectors, this one works well and gives you the flexibility to get the whole hose system working.

Ships within 2 days

Uxcell 10mm Fitting Connector-Pack of 4

By Uxcell

₹2,005

The Uxcell 10mm Fitting Connector-Pack of 4 is used for connecting flexible tubing to a variety of air, water and fluid handling devices. They are constructed of durable plastic and have a stainless steel insert that provides a fluid tight seal. The connectors may be used with straight or angled type tubes It includes four different types of fittings that you can use with 10mm tubing. These are commonly used as adapters in industries such as plumbing, HVAC, and hydroponics. The fittings are constructed from nickel-plated brass, so they're durable and long-lasting. hese connectors are chrome-plated brass for easy use and long-term durability. This product ensures that you can safely hook up your shower to your plumbing without leaks or damage to user home. A reducer, also known as an adapter, allows the smaller diameter hose to connect to a larger diameter hose. A coupler connects two tubes with the same diameter. Pipe fittings are used in plumbing and in fluid power systems to make and repair pipe lines, fluid lines and tubing systems. They are not used to distribute fluids or gases in commercial or manufacturing applications. Hose fittings provide a comfortable grip for easy connections and disconnections as well as preventing leaks from occurring during operation.

Uxcell 1 X 3/4 Inch Reducer Hex Nipple-Pack of 4

Ships within 2 days

Uxcell 1 X 3/4 Inch Reducer Hex Nipple-Pack of 4

By Uxcell

₹695

The Uxcell 1/4" x 3/4" HEX Nipple is a hexagonal pipe fitting with a 1/4" female thread on one end and a 3/4" male thread on the other end. It is made from high quality brass and plated with zinc and is used for reducing the size of pipe. The most common use of these reducers is to attach 2 pieces of PVC pipe together. When user have a connection that needs to be air-tight and liquid-tight, this part will come in handy. The inside diameter of the reducer is smaller than the outside diameter of the pipe it's attached to, so it takes up some space, but this allows for great versatility. They're suitable for use in PVC or CPVC pipes and are made from PVC. They work with CPVC pipes that have a P trap. The reducer hex nipple is designed for use with threaded pipe fittings, solvent weld fittings, and other types of pipe fittings, making them versatile in terms of the different types of pipes. esigned for PVC pipes, these reducer nipples will fit pipes with 1 inch outside diameter and a 3/4 inch inside diameter. This reducer nipple features a hex design for easy coupling and reduced installation time, and can be used for air conditioners, refrigeration systems, gas lines and more. It is made from brass for long-lasting durability and corrosion resistance.

Ships within 2 days

Uxcell 1/2x1/2Inch Brass Connector

By Uxcell

₹388

The Uxcell 1/2x1/2Inch Brass Connector is a brass fitting that's typically used to join two lengths of plumbing pipe. The fitting has a female thread on both sides and includes two O-rings for sealing. This 3-way brass connector with male threads on all sides is a great component for building custom fittings for your plumbing projects. It's precision-machined for a tight fit and includes one knurled nut for simplicity of assembly. Has a durable, attractive finish. It features a 1/2-inch female threaded port on one side, and 1/2-inch male threaded port on the other, which allows it to connect two separate pieces of copper piping together. The connector has two 1/2-inch openings on either side and can be used with another Uxcell 1/2x1/2Inch Brass Connector to create a longer piece of cable to work with—this can be useful if you need to run wires from one location to another. It can connect any combination of copper, brass, or galvanized steel pipe, and should be pre-flared before use. The connector is 2" long and 1/2" wide. t has many uses, such as connecting a pipe to a water fountain , or connecting parts on electrical equipment . It is a structural mechanical connector that has been designed for joining of wood, wood-based panels, drywall, and other similar materials. It's easy to install and can be utilized in various applications. It's made of brass material and has a zinc-plated finish.

Uxcell 1/4x1/2 Inch Reducing Hex Nipple-Pack of 4

Ships within 2 days

Uxcell 1/4x1/2 Inch Reducing Hex Nipple-Pack of 4

By Uxcell

₹754

Uxcell 1/4x1/2 Inch Reducing Hex Nipple-Pack of 4 The fitting is made from brass and features a gold tone that gives off a shiny and elegant look.It is a reducing fitting that connects two pipes of different sizes. The design of the fitting allows it to fit into the receiving pipe in order to create a water-tight seal. This nipple fitting will fit securely onto any ½ inch pipe and has an outside diameter of ½ inch. The brass material is extremely durable, making it ideal for use in both residential and commercial settings. These nipples are simple to install, simply push them onto the pipe, then secure with a crescent wrench. It is compatible with the G 1/4 male fitting and the G 1/2 male fitting. This product is suitable for use with water, gas, oil, and other chemicals in both residential and commercial applications. It is commonly used to connect a pipe to a ball valve. The material is made of brass, which can resist corrosion. This item is specifically designed for these situations, with a male thread on one side and a female thread on the other, each of which is 1/4" in size. The nipples are 4-inches long and made of brass.

Ships within 3 days

Uxcell 10mm Hose Fitting Tee-Pack of 5

By Uxcell

₹695

Uxcell's 10mm Hose Fitting Tee pack of 5 is ideal for connecting two hoses together for purposes such as water supply, gas supply, and more. Made from high-quality brass, this tee is durable and long-lasting. It features a 90° swivel which prevents kinking and damage to the hose. The product measures approximately 6" x 3" x 2". The fitting can be installed with either brass or stainless steel threaded hose. The fitting and all of its components are made from 304 stainless steel for superior corrosion resistance. This fitting is made of nickel plated brass and has an inside diameter of 5/8", with a 3/8" maximum opening. The hose fitting has a standard female thread, so it will fit any similarly threaded male connector. These are well-made, solid brass fittings that are extremely useful if you have a lot of stuff that needs hooking up to a water supply. Each fitting has two T's on each side and one straight connector, which allows for more versatility than the usual T-fitting. The material is durable and high quality, and the pack comes with five so you can have enough for a multi-nozzle sprayer or to set up something like a watering system for your garden. With the right tools, you can also fit these fittings onto a variety of things like PVC pipes, so you can create your own custom set-up.

Ships within 2 days

Uxcell 1/2x1/2Inch Brass Connector

By Uxcell

₹565

Uxcell 1/2x1/2Inch Brass Connector is an adapter that is used to connect 1/2" male pipe threads to 1/2" female pipe threads. The adapter is brass made with a smooth finish and standard size that fits both male and female threads. The brass connector is a pipe fitting, adapter, 1/2 PT male x 1/2 PT female connector that is commonly used in industrial and commercial applications. The product is made of high quality brass which is resistant to corrosion and is designed to be used in a variety of industries including oil and gas, textile, pharmaceutical, and medical industries. The brass connector is a fitting that is used in plumbing. It is manufactured from brass and has a male thread on one side and a female thread on the other. The male thread connects to another tube or pipe and the female thread connects to another tube or pipe. This product is designed to connect two male threaded pipe parts together. The material used should make this product perform well as a gasket, keeping the connection airtight. is brass adapter uses compression-to-fit connections. It is made of brass and has nickel plated finish. This brass pipe fitting features nickel plated finish and its male stud to female thread adapter allows you to connect two pieces of threaded pipe together.

Ships within 2 days

Uxcell 3/4x1/2Inch Connector-Pack of 2

By Uxcell

₹353

Uxcell 3/4x1/2Inch Connector-Pack of 2 is a connector, used to connect parts of pipes or tubes. It is made of zinc alloy material. It comes with red color. This connector has a hexagonal shape, and inner diameter of 3/4", outer diameter of 1/2", and height of 4-7/8". It has a bolt hole design, and flange at the bottom. Its pipe fittings can be used to join two pieces of copper, PVC, CPVC, steel, cast iron and other types of pipes with a maximum working pressure of 250 PSI. A nickel-plated washer is included to ensure a leak-proof connection, while an O-ring works as an additional seal to ensure that the parts stay tight and do not leak. This reducing pipe fitting is durable and perfect for outdoor use, such as in fountains, ponds, pools, spas and water features, where it can help conduct water in a more efficient manner. The pipe fitting is used to make a male thread upon installation. This reducing pipe fitting has a hexagonal shape. The product has zinc plating, and is made from stainless steel. This is a fitting that can connect two pipes at different sizes. The zinc plating on this fitting makes it good for using in outdoor or marine environments and the hex-shaped head on this fitting makes it easy to turn while connecting two pipes.

Uxcell 1/8 X 1/4Inch Connector-Pack of 4

Ships within 2 days

Uxcell 1/8 X 1/4Inch Connector-Pack of 4

By Uxcell

₹294

Uxcell 1/8 X 1/4Inch Connector-Pack of 4 are molded of durable, long-lasting nylon and have a male BSP (British standard pipe) thread. This part is commonly used in hot and cold water plumbing systems in commercial, industrial and residential buildings. Brass is easy to be machined and casted, so it was widely used in the industry. Brass is an excellent choice for a plumbing system as it has a high structural strength, low density and high corrosion resistance. The connection between them can easily make a tight seal with each other with no leakage of water. It can be widely used in many fields such as plumbing, construction, industry and agriculture. It is designed to form a leak proof seal when installed. This product has a hexagonal nut that fits into a hexagonal plug and is easy to install and remove. The hexagonal plug can be rotated after installation and has a pipe thread that can be screwed into a matching female thread on another fitting. he connector is used for reducing pipe sizes in plumbing systems, such as for reducing the size of a gas or fuel line. The pipe fitting has hexagonal shape, so you can use a wrench to tighten or loosen the pipe. This uxcell fitting is designed for reducing the 1/8 inch BSP male connector to 1/4 inch BSP male connector or reducing the 1/4 inch BSP male connector to 1/8 inch BSP male connector.

Ships within 2 days

Uxcell 3/4x3/4Inch Connector

By Uxcell

₹329

Uxcell 3/4x3/4Inch Connector are manufactured from premium grade brass. It is in a black finish and has a hex shape with an internal thread of 3/4 inches. The pipe fitting is ideal for connecting two pipes or tubes of the same size. It can also be used as an adapter to connect a tube with a different size of threads or to connect two pipes of different sizes. Used in many plumbing applications, these brass fittings are designed to connect two pieces of pipe with a threaded interior and exterior. The material of the uxcell Brass Pipe Fitting Hex Nipple 3/4 BSP Male x 3/4 BSP Male Thread Connectors is brass, which has good corrosion resistance. The uxcell Brass Pipe Fitting Hex Nipple 3/4 BSP Male x 3/4 BSP Male Thread Connectors has a hexagonal shape, which can help tighten the pipe and make the joints more secure. The brass body is made of superior-quality material, ensuring a long lifespan. The streamlined design reduces the risk of leakage and damage to the pipe. It can be used in industrial environments such as chemical plants or manufacturing facilities, as well as residential applications such as plumbing projects at home. They are made of brass, which is highly resistant to corrosion and will also help prevent any water leaks from occurring. These threaded connectors are used for joining two pipes together and allow for a male thread to connect together with a female thread. These can be used in residential or commercial applications.

Uxcell 1/8 X 1/4 Inch Connector-Pack of 10

Ships within 2 days

Uxcell 1/8 X 1/4 Inch Connector-Pack of 10

By Uxcell

₹471

Uxcell 1/8 X 1/4 Inch Connector-Pack of 10 are used to connect two lengths of wire together. The pack includes 10 connectors in one color. They are made of plastic and are black in color. They can be used with many household electrical devices, such as lamps, fans, etc. There are four ridges on each connector; one acts as an insulating barrier to separate the top and bottom halves of the connector for added safety and stability. The second ridge has a raised metal post at its center, so that you can easily attach wires or cables to it for soldering purposes. This is a 10-piece set of reducing pipe fittings that connects 1/8" female threads to 1/4" female threads. The zinc finish adds durability and years of use. The reducing pipe fitting allows you to connect the two pipes in a straight line without having to turn any corners. This reduces resistance and helps increase water flow. It has a zinc plating finish. The pipe fitting has an outside diameter of 1/8" and an internal diameter of 3/16". This fitting is designed to reduce the flow of water between two different pipes. This reducer is also helpful when connecting a water line for fixtures such as hand showers or bath spouts.

Ships within 2 days

Uxcell 1 X 1/2Inch Connector

By Uxcell

₹199

The Uxcell 1 X 1/2Inch Connector is a 2-inch long connector with a slightly rounded, rectangular shape. It has two holes on each end that are 3/8 of an inch wide and 1/8 of an inch deep and it's made of metal. This connector has a large bore, ensuring that there is minimal restriction on water flow. The material used in this connector is made of top-quality brass, which makes it very durable and corrosion resistant. This connector can be easily connected with PVC and other kinds of plastic pipes. his plastic connector is made of high quality PVC and has a standard male thread on both ends, so it will fit into any standard female thread. The connector is easy to install and can be used for indoor or outdoor connections. Carbon steel is a very sturdy material, and the thickness of this piece lends to that. The bolt on its end allows the connector to be screwed into place; it fits over the end of the pipe even if there are fittings already in place. It's also useful for connecting together two pieces of pipe that don't fit together otherwise, like if you have some 3/4 inch pipe and need to connect it to 1 inch.

Uxcell 1/2 X 1/4Inch Connector-Pack of 4

Ships within 2 days

Uxcell 1/2 X 1/4Inch Connector-Pack of 4

By Uxcell

₹270

These Uxcell 1/2" X 1/4" Connector-Pack of 4 are machined out of surgical stainless steel or nickel plated brass. The connectors are used to join pipe and tube fittings.It is a combination of 4 connectors, which are used with other multi-meter accessories. It is made of high quality material and is convenient to use. It can help in testing the cable and measuring the resistor's resistance or continuity. The connectors are made from carbon steel and have a nickel plating. They come in a pack of four that includes three male connectors and one female connector. The connectors are made of high quality stainless steel so that they can be used in harsh environment. The connectors are easy to connect and disconnect, which can avoid the frequent plugging and unplugging. It is used on vehicles to hold the bumper cover and the fender together. They come with a pre-drilled hole on one end to make installation easier. The connectors fit together firmly. For more intensive uses (like attaching shelving to a wall or building temporary structures) you should look into metal braces that are designed specifically for those purposes instead. The push on quick connector will connect two plastic or metal pipe or tubing at a 90 degree angle, without the use of tools or glue.

Uxcell 1/2 X 3/8Inch Connector-Pack of 4

Ships within 2 days

Uxcell 1/2 X 3/8Inch Connector-Pack of 4

By Uxcell

₹353

The Uxcell 1/2 X 3/8Inch Connector Pack of 4 is used to make connections between two separate objects. It is composed of a metal rod with a small, plastic connector at the end for connecting to another rod. This product can be used in many machines, including various weapons and tools. The connector has a pair of holes on each side that can be used to secure it in place with zip ties, as well as a flat surface on its bottom that allows it to be sturdy when placed directly on a surface. The connector comes in two separate pieces, which are each slightly more than 1/2 inch long and about 3/8 inch wide. They have a small hole in the center to allow for the insertion of a nail or screw, and the total thickness of the two pieces together is just under 1/4 inch. These connectors come in a pack of four, and are constructed from zinc alloy. Each connector measures 1/2 inch by 3/8 inch, which is the industry standard size for wood screws and bolts. While it is intended for use with wood, it can also be used with other materials that are not very abrasive, such as plastic or vinyl. The connector has a smooth exterior and is made from a solid piece of plastic that won't bend or twist when you're trying to fit it onto a pipe. It's great for projects like connecting drain pipes or ventilation lines to plumbing vents.

Ships within 2 days

Uxcell 1/8x1/4Inch Coupling-Pack of 2

By Uxcell

₹648

Uxcell 1/8x1/4Inch Coupling-Pack of 2 is a brass pipe fitting for connecting two pieces of copper or CPVC water pipes. The connection will be tight enough to resist leaking under normal water pressure. It is used for both hot and cold water lines. They Consist of1/8 PT Male x 1/4 PT Female Coupling, is a product that can be used to join two pipes together. This fitting is made of brass and the diameter of this fitting is 1/8"PT Male x 1/4"PT Female. The male end of the fitting has a 1/8 inch outside diameter, and the female end has a 1/4 inch outside diameter. The inside diameters of both ends are 3/16 inches. The length of the pipe is 1 inch. The adapter features check valves that prevent backflow and easy operation. It features a long metal tube that threads into any 1/8" pipe and then screws into a 1/4" female pipe. The opposite end also features a male 1/8" thread that can be screwed directly into another fitting or pipe. They are also useful for connecting flexible plastic tubing to rigid metal pipe. The brass material is both sturdy and lightweight, and the smooth surface ensures easy installation and long-lasting functionality.

Ships within 2 days

Uxcell 1/4Inch Coupler Connector-Black

By Uxcell

₹388

Uxcell 1/4Inch Coupler Connector-Black is a connector that can be used to connect two pipes of the same diameter. The surface of the Uxcell 1/4Inch Coupler Connector-Black is smooth and glossy, which makes it resistant to rust, anti-corrosion, rust and deformation. The connectors are designed with dual O-ring seal and four metal latches to ensure a reliable tight connection with excellent hermetic performance. It has a rubber seal that helps to keep out dust and moisture and offers long-lasting performance. The connector features a 1/4 inch female pipe thread on one end, and a 1/4 inch male pipe thread on the other. This coupler connector is ideal for connecting two quarter-inch threaded pipes together. The coupler has a half-inch female thread on one end and a quarter-inch male thread on the other end. It is made of stainless steel, and it is resistant to corrosion and rust. This fitting is used to connect the female side of a hose to a male side of another hose. The fitting has an O-ring seal to prevent air leaks. The inside diameter is 1/4" and the outside diameter is 5/16". his product is ideal for connecting two end pieces of 1/4-inch pipe together, or for creating a custom length pipe extension.

Ships within 2 days

Uxcell 1/4Inch Coupler Connector-Red

By Uxcell

₹388

Uxcell 1/4Inch Coupler Connector-Red is a connector that can be used to connect two pipes of the same diameter. The surface of the Uxcell 1/4Inch Coupler Connector-Red is smooth and glossy, which makes it resistant to rust, anti-corrosion, rust and deformation. The connectors are designed with dual O-ring seal and four metal latches to ensure a reliable tight connection with excellent hermetic performance. It has a rubber seal that helps to keep out dust and moisture and offers long-lasting performance. The connector features a 1/4 inch female pipe thread on one end, and a 1/4 inch male pipe thread on the other. This coupler connector is ideal for connecting two quarter-inch threaded pipes together. The coupler has a half-inch female thread on one end and a quarter-inch male thread on the other end. It is made of stainless steel, and it is resistant to corrosion and rust. This fitting is used to connect the female side of a hose to a male side of another hose. The fitting has an O-ring seal to prevent air leaks. The inside diameter is 1/4" and the outside diameter is 5/16". his product is ideal for connecting two end pieces of 1/4-inch pipe together, or for creating a custom length pipe extension.

Uxcell 1/2x3/4 Inch Reducer Hex Nipple-Pack of 10

Ships within 2 days

Uxcell 1/2x3/4 Inch Reducer Hex Nipple-Pack of 10

By Uxcell

₹1,415

p style="margin:0in 0in 8pt">Uxcell 1/2x3/4 Inch Reducer Hex Nipple-Pack of 10 are used to reduce the size of a pipe opening. They are used where you need to connect two pipes of different sizes. They are constructed of steel and have an inner thread diameter of 3/4 inch and an outer thread diameter of 1/2 inch. The body is hexagonal in shape, with an overall length of 1.5 inch and a wall thickness of 0.085 inch. The nipple has a red paint finish for corrosion resistance and identification purposes. The nipples will fit pipes with an inside diameter from 0.75 to 1 inch. The size is measured by the male thread, which means the female thread is 3/4" less in size. This reducer allows you to connect two pieces with differing sizes. The reducer has a hexagonal shape that ensures a secure connection between pipes. The size is measured by the male thread, which means the female thread is 3/4" less in size. This reducer allows you to connect two pieces with differing sizes. The reducer has a hexagonal shape that ensures a secure connection between pipes. When not reducing the size of the pipe, these reducers can also be used as a flex joint. Flex joints are often used to make connections between lengths of pneumatic tubing in order to minimize vibration and noise.

Uxcell 1/4x1/4 Inch Pipe Fitting-Pack of 5

Ships within 2 days

Uxcell 1/4x1/4 Inch Pipe Fitting-Pack of 5

By Uxcell

₹683

Uxcell 1/4x1/4 Inch Pipe Fitting-Pack of 5 is Made of brass material, durable and easy to install. The pipe fitting has the 90 degree angle between the input and output. The pipe fitting is used for connecting the pipes in plumbing, which very convenient and quick installation. This 1/4 inch elbow can connect 1/2 inch or 3/8 inch pipe, fitting the 1/4 inch standard. The 1/4 inch male to 1/4 inch female pipe fitting is made from brass and is corrosion resistant. This particular product is a brass pipe fitting 90 degree elbow 1/4 BSP Male to 1/4 BSP Female. It's made of brass, which is a metal alloy that generally adds durability, heat resistance, and corrosion resistance to whatever it's used in. The elbow is designed to connect two pieces of pipe at a right angle, which can be used to redirect water flow or change the direction of a stream of water. The 1/4-inch inside diameter (ID) connects to standard 1/4-inch OD (outside diameter) piping and tubing for simple installation. The inside surface of the elbow is slightly tapered to allow for a more streamlined flow of water through it. This taper is gradual enough that there should be little pressure drop when using this fitting in plumbing applications. The outside surface of the elbow has been sanded down for smoothness, with no sharp edges or burrs left over from manufacturing

Uxcell 3/8x3/8 Inch Pipe Fitting-Pack of 2

Ships within 2 days

Uxcell 3/8x3/8 Inch Pipe Fitting-Pack of 2

By Uxcell

₹353

UXcell brass pipe fitting 90 degree elbow 3/8 BSP male x 3/8 BSP female 2pcs is made of brass and zinc plated surface, designed for the piping system in home, office, factory etc. features two female threaded ports that can be screwed onto the incoming and outgoing pipes respectively, and has a male threaded port on the side to which another pipe can be connected. The brass material used in this elbow is resistant to corrosion and is durable for long-term use. This fitting has a standard size of 1/2", so it will be able to fit most standard pipes and shower hoses without any problem. It is easy to install and durable enough to withstand years of regular use. This is an elbow fitting that goes between the two ends of a pipe. It's made of brass, which is a soft metal, so this part might need to be replaced occasionally if it's used in an environment with a lot of wear and tear. It has 3/8" male threads on one side and 3/8" female threads on the other, so it can connect together pieces of copper pipe with those thread sizes. The fitting is made of brass, measures 1.5 inches long and weighs 0.11 pounds. This item requires no additional hardware for installation, however applicable clamps may be necessary depending upon the application.

Uxcell 1/2x1/4 Inch Hex Bushing Adapter-Pack of 5

Ships within 2 days

Uxcell 1/2x1/4 Inch Hex Bushing Adapter-Pack of 5

By Uxcell

₹707

Uxcell 1/2x1/4 Inch Hex Bushing Adapter-Pack of 5 are used to connect two or more pieces of threaded rods together so that they can be used as a single piece of threaded rod. They are typically made from bronze. This is a pack of five Uxcell 1/2 inch hex bushing adapters, which are 6mm in diameter and approximately 20mm long. The adapter has a total length of 1.12" and extends 0.7". It has a gray finish and weighs 0.08 lbs. The material used to make this product is steel, which makes it sturdy and durable. This adapter can be used with a variety of tools and equipment with 1/2" hex shafts. The bushings ensure smooth operation over time and provide a tight fit to prevent leaks. The two sides are set at a 90 degree angle, and the outer surface is flat. This adapter can be used with a range of threaded items, from long bolts to short screws and everything between. . It is used to connect two or more objects that would otherwise not be able to do so. These are available in various sizes, allowing you to use it with larger objects as well. The adapter is manufactured using high quality material, making it durable and long lasting. e bushing has three bolt holes and a hexagonal shank with a 1/2 inch diameter. The bushing is made of steel and has a black oxide finish.

Page 1 of 1 results

Product Name	Expected Price	Dispatch Time	Discount
Lovely L2901 100 mm Support Split Pipe Clamp	₹83	30 days	--
Unik 32 mm Galvanized Iron 3 Way Elbow	₹329	8 days	21.68% OFF
B K JAGAN & CO Round Type 152.4 mm (6 Inch) Pipe Chili Clamp (Pack of 5 pcs)	₹1,415	4 days	0.01% OFF
Lintas 12.7 mm(1/2") Male Plug Grade 304	₹129	7 days	--
Unik Galvanized Iron 20 mm M.I.G.I Flange	₹258	24 hrs	--
Leader GM 058 Gun Metal H Ferrule Cock Jcswr 32 mm PN - 16	₹5,781	8 days	6.97% OFF
Unik 40 mm Galvanized Iron 3 Way Elbow	₹412	8 days	22.06% OFF

Uxcell Metal Pipe Fittings

Top Selling Uxcell Metal Pipe Fittings Products Price List for March 2026