View
View
View
View
| Type of Product | Clamp-On Sensor |
| Model No | CT6500 |
| Temperature coefficient | ±0.05%rdg./℃ |
| Applicable Standard | Safety: EN61010, EMC: EN61326 (Class A) |
Type of Product |
Clamp-On Sensor |
Model No |
CT6500 |
Temperature coefficient |
±0.05%rdg./℃ |
Applicable Standard |
Safety: EN61010, EMC: EN61326 (Class A) |
Measurable conductor diameter (Φmm) |
46 or less |
Cable Length (m) |
About 3 |
Input Current (A) |
[Maximum] 600 continuous (45Hz to 66Hz, ambient temperature 50℃) |
Rated Voltage |
[To ground/Maximum] AC 600Vrms or less, Measurement Category III (Expected transient overvoltage 6000V) |
Output Voltage |
AC 1 mV/A |
Rated Primary Current (A) |
AC 500 |
Output Terminal |
BNC terminal |
Country of Origin |
Japan |
Amplitude Accuracy |
±1.5% rdg. ±0.03%fs (fs is measured at 500 A, 50 Hz/60 Hz, centered on the jaw) |
Monotaro ID |
37622155 |
Included Components |
Instruction manual |
Name of Manufacturer/Packer/Importer |
HIOKI E.E. CORPORATION |
Import Country |
Direct Import from Japan |
Mass (g) |
About 360 |
Dimension (WxDxH) |
Approximately 78 x 152 x 42 mm (excluding protrusions) |
RoHS Directive |
Correspondence |
Specifications |
Product warranty period: 1 year |
Operating Temperature / Humidity Range |
0 to 50°C, 80% RH or less (non-condensing) |
Frequency Characteristic |
40Hz to 1kHz ±5% (deviation from amplitude accuracy) [Amplitude] |
Storage Temperature/Humidity Range |
-10 to 60°C, 80% RH or less (non-condensing) |
Withstand Voltage |
AC 70-60Vrms (sensitivity current 1mA), 50Hz/60Hz, 1 minute, between jaw and output connector. |
Where to Use |
Up to an altitude of 2000m, contamination level 2, indoors |
Rated Input Current (A) |
AC 500 |
Accuracy Guaranteed Range of Temperature / Humidity |
23±5℃, 80% rh or less |
Effective |
Within ±3% (deviation from the center) |
Opening & Closing Time |
[Joe Club] Up to 10,000 times |
Guarantee |
1 year, [adjusted] 1 year |
Looking for bulk pricing or different specifications?