View
View
View
View
| Type of Product | Digital Multimeters |
| Model No | KEW1061 |
| Measurement Functions | DC voltage, AC voltage, DCV + ACV, DC current, AC current, DCA + ACA, resistance, frequency, temperature, capacitance, duty cycle, decibel calculation, continuity check, diode test |
| Country of Origin | Japan |
Type of Product |
Digital Multimeters |
Model No |
KEW1061 |
Measurement Functions |
DC voltage, AC voltage, DCV + ACV, DC current, AC current, DCA + ACA, resistance, frequency, temperature, capacitance, duty cycle, decibel calculation, continuity check, diode test |
Country of Origin |
Japan |
Current (AC/DC) |
500.00 / 5000.0μA / 50.000 / 500.00mA / 5.00 / 10.000A, ± 1.5% rdg ± 10dgt (basic accuracy) |
Power Supply |
AA batteries LR6 / R6 (1.5V) x 4 |
Capacitance (F) |
5.000 / 50.00 / 500.0n / 5.000 / 50.00 / 500.0μ / 5.000 / 50.00m, ± 1% rdg ± 5dgt (basic accuracy) |
Frequency |
2.000 to 9.999 / 9.00 to 99.99 / 90.0 to 999.9Hz / 0.900 to 9.999 / 9.00 to 99.99kHz, ± 0.02% rdg ± 1dgt (basic accuracy) |
Resistance (Ω) |
500.00 / 5.0000 / 50.000 / 500.00k / 5.0000 / 50.000M, ± 0.1% rdg ± 2dgt (basic accuracy) |
AC Current Range |
[RMS] 500.00 / 5000.0μA / 50.000 / 500.00mA / 5.00 / 10.000A, ± 1% rdg ± 20dgt (basic accuracy) |
Diode Test |
2.4000V, ± 1% rdg ± 2dgt, open circuit voltage: <5V (approx. 0.5mA measured current) |
Applicable Standard |
IEC 61010-1 CAT.IV 600V, CAT.III 1000V Pollution Degree 2, IEC 61010-031, IEC 61326-1 (EMC) |
Voltage (Dc) |
50.000 V / 500.00 V / 2400.0 mV / 5.0000 V / 50.000 V / 500.00 V / 1000.0 V (input impedance: approx. 100MΩ [50/500 / 2400mV], 10MΩ [5/50/500 / 1000V]), ± 0.02% rdg ± 2dgt (basic accuracy) |
Continuity |
500.0Ω (Buzzer ON when 100 ± 50Ω or less) |
Voltage (AC/DC) |
5.0000 / 50.000 / 500.00 / 1000.0V (input impedance: 11MΩ <50pF [5V], 10MΩ <50pF [50/500 / 1000V]), ± 1% rdg ± 10dgt (basic accuracy) |
Duty |
10 to 90%, ±1%rdg |
AC Voltage (Volts) |
[RMS] 500.00m / 5.0000 / 50.000 / 500.00 / 1000.0 (Input impedance: 11MΩ <50pF [50 / 500mV / 5V], 10MΩ <50pF [50/500 / 1000V]), ± 0.7% rdg ± 30dgt (basic accuracy) |
Included Components |
7220A (measurement code), 8926 (fuse [440mA / 1000V]) x 1 <built-in main unit>, 8927 (fuse [10A / 1000V]) x 1 <built-in main unit>, AA batteries x 4, instruction manual |
Monotaro ID |
5372447 |
Import Country |
Direct Import from Japan |
Name of Manufacturer/Packer/Importer |
Kyoritsu Electrical Instruments Co., Ltd. |
Height (mm) |
192 |
Length (mm) |
49 |
Width (mm) |
90 |
Mass (g) |
Approximately 560 (including batteries) |
Wave Detection |
Effective value |
RoHS Directive |
Correspondence |
Suitable Battery |
AA battery x 4 |
Dimension (WxDxH) |
90x192x49 mm |
Dimensions, Length L x Width W x Depth D (mm) |
192x90x49 |
Trusco Part No. |
479-6420 |
Temperature (℃) |
-200 to 1372, ± 1% rdg ± 1.5 (using K-type temperature probe) |
Additional Functions |
Data hold / auto hold, range hold, maximum / minimum / average, resistance / capacitance zero, deviation / calculation, manual memory, logging memory, auto power off, backlight (white LED) |
Auto Power-Off |
About 20 minutes |
Looking for bulk pricing or different specifications?