View
View
View
View
| Type of Product | Torque Tester |
| Model No | I-80 |
| Data Output | ASCII format (baud rate 19200) |
| Country of Origin | Japan |
Type of Product |
Torque Tester |
Model No |
I-80 |
Data Output |
ASCII format (baud rate 19200) |
Country of Origin |
Japan |
Name of Manufacturer/Packer/Importer |
IMADA Co., Ltd. |
Import Country |
Direct Import from Japan |
Monotaro ID |
9287918 |
Included Components |
Measuring joint OW-20/OW-60, attaché case, dedicated charger, inspection report, calibration certificate, traceability system diagram |
Specifications |
●Auto-clear time: The display is automatically set to zero every 0.1 to 3.0 seconds (0.5 second intervals), and manual zero clear is achieved by setting it to 0.0 seconds●Socket fitting (detection part shape): □20 /□9.5●Real-time output: The applied load torque is output as data approximately every 1/180 seconds●One-touch zero adjustment: Zero adjustment is automatic and one-touch●Maximum, minimum, and average value display: Displays the maximum, minimum, and average values and number of data points of the measured values saved in the memory●Accuracy ±0.5% (reading value) However, ±3 digits for values below 499 digits●Display: LCD 4-digit digital display, |
Recharging Time(hours) |
About 3 |
Admission decision |
You can check the pass/fail result within the measured range (in PP mode). The lamp lights up to confirm: GOOD (pass) - Green light, NG (fail) - Red flashing |
Torque Measurement Range |
0.02 to 8 Nm (2 to 800c N-m) |
Measuring Direction |
CW-CCW (right/left direction) |
Upper / Lower Limits of Setting |
Both upper and lower limits can be set within the measurement range |
Data Memory |
Measured value 800 data |
Continuous Operating Time (hrs) |
About 12 |
Auto Power-Off |
Power off after standing for 10 minutes |
Battery |
Nickel-metal hydride battery can be charged over 300 times |
Measurement Modes |
PP (peak), TR (track), PD (peak down), C (real-time data output) |
Looking for bulk pricing or different specifications?