Have a question? Call us now at +91 9650660070

Filter Regulator & Air Lubricator (Frl)

Showing 40 out of 898 products

Sort by

Raja Rubbers 6.35 mm (1/4 inch) Filter Regulator Lubricator Unit without Guard AFRL306

Ships within 3 days

Raja Rubbers 6.35 mm (1/4 inch) Filter Regulator Lubricator Unit without Guard AFRL306

By Raja Rubbers

₹1,651

Application
· Air Filter Regulator and Lubricator FRL Use for Paper & Pulp, Food & Beverage, Pharmaceutical.
· Air Filter Regulator and Lubricator FRL Use for Automotive.
Filter - Airline Filter
An airline filter cleans compressed air. It strains the air, traps solid particles (dust, dirt, rust) and separates liquids entrained in the compressed air. Filters are installed in the air line upstream of regulators, lubricators, directional control valves, and air driven devices such as cylinders and air motors.
Because airline filters remove contaminants from pneumatic systems, they prevent damage to equipment and reduce production losses due to contaminant-related downtime. Selecting the proper size of filter for any application should be done by determining the maximum allowable pressure drop, which can be caused by the filter. The pressure drop can be determined by referring to flow curves provided by the manufacturer. There are three general types of air filters: General purpose Coalescing (oil removal) Vapor removal General Purpose, are used to remove water and particles, while Coalescing filters remove oil, and Vapor Removal filters remove oil vapor and odor.
Regulators - Pressure regulators
Pressure regulators Pressure regulators reduce and control air pressure in compressed air systems, including rotary screw air compressors. Regulators are also frequently referred to as PRVs (pressure reducing valves). Optimally, a pressure regulator maintains a constant output pressure regardless of variations in the input pressure and downstream flow requirements. In practice, output pressure is influenced to some degree by variations in primary pressure and flow. Pressure regulators are used to control pressure to: Air tools Blow guns Air gauging equipment Air cylinders Air bearings Air motors Spraying devices Fluidic systems Air logic valves Aerosol lubrication system Most other fluid power applications General purpose regulators are available in relieving or non-relieving types. Relieving regulators can be adjusted from a high pressure to a low pressure. Even in a dead-end situation, relieving regulators will allow the excess downstream pressure to be exhausted. This causes a loud hissing sound which is perfectly normal. Non-relieving regulators that are similarly adjusted will not allow the downstream pressure to escape. Instead, the trapped air will need to be released in some other way—for example, by operating a downstream valve. Downstream equipment flow and pressure requirements must be determined to properly size the correct regulator for the application.
Lubricator
Lubricator A lubricator adds controlled quantities of tool oil into a compressed air system to reduce the friction of moving components. Most air tools, cylinders, valves, air motors, and other air driven equipment require lubrication to extend their useful life. The use of an airline lubricator solves the problems of too much or too little lubrication that arise with conventional lubrication methods such as a grease gun or oil. Airline lubricators also supply the right kind of lubricant for the tools being used. Once the lubricator is adjusted, an accurately metered quantity of lubricant is supplied to the air-operated equipment and the only maintenance required is a periodic refill of the lubricator reservoir. Adding lubrication to a system also “washes away” compressor oils that travel through the system in vapor form.. When lubricators are not used in a system, a coalescing filter should be installed to remove compressor oil aerosols.
Mineral oils added to the system prevent synthetic compressor oil build-up on system components. When lubricators are not used in a system, a coalescing filter should be installed to remove compressor oil aerosols. Lubricators are sized by downstream flow requirements. An analysis of air flow use must be made. After determining how much air flow is needed, a lubricator can be chosen. Manufacturers’ curves will be similar to the one shown.

Techno 12.7 mm (1/2 Inch) Airtech FRL with Gauge, BFC4000

Ships within 24 hrs

TECHNO FRL with Gauge Airtech Type (Size 1/2-1/4 Inch)

By TECHNO

₹754 - ₹1,887

The TECHNO FRL with Gauge Airtech Type, available in size 1/2-1/4 inch, is a comprehensive solution designed to maintain optimal air quality and pressure in pneumatic systems. FRL stands for Filter, Regulator, and Lubricator, and this device integrates all three functions into a single unit, along with a gauge for precise pressure monitoring. Engineered for efficiency and reliability, the TECHNO FRL with Gauge Airtech Type ensures clean, dry, and regulated air supply to pneumatic tools and equipment. Its compact and integrated design saves space and simplifies installation, making it suitable for various industrial and manufacturing applications. The filter element of the FRL effectively removes contaminants, dirt, and moisture from compressed air, preventing damage to pneumatic components and ensuring smooth operation of machinery. The regulator function allows users to adjust and maintain desired air pressure levels with precision, while the lubricator function provides necessary lubrication to reduce friction and wear. Equipped with a gauge, this FRL unit allows for easy monitoring of air pressure levels, ensuring that pneumatic systems operate within specified parameters. Whether used in factories, workshops, or other industrial settings, the TECHNO FRL with Gauge Airtech Type is a reliable solution for maintaining efficient pneumatic systems and enhancing productivity.

Type of Product : FRL with Gauge Airtech Type

Application : Industrial

Return Policy : Non Returnable

Akari 12.7 mm (1/2 Inch) AC Series FRL with Gauge & Metal Guard AC-4010-04

Ships within 24 hrs

Akari 12.7 mm (1/2 Inch) AC Series FRL with Gauge & Metal Guard AC-4010-04

By AKARI

₹2,477 ~~₹3,835~~

You save ₹1,358!

35.41% OFF

An FRL combines a filter, regulator, and lubricator into one component to keep air compressor systems in optimal working condition. FRL Components An FRL has three primary components: Airline filter Pressure regulator Lubricator Each of these individual components has its role, supporting the larger air compressor system.Note :-Non Returnable "

Janatics Polycarbonate Filter 10Bar F13613

Ships within 24 hrs

Janatics Polycarbonate Filter 10 Bar with Manual Drain

By Janatics

₹719 - ₹3,893

The Janatics Polycarbonate Filter, rated for a maximum pressure of 10 Bar, is a crucial component in pneumatic systems, meticulously engineered to ensure the purity and integrity of compressed air streams in industrial applications. Crafted with precision and durability, this filter offers reliable performance and contributes to the seamless operation of pneumatic equipment. Operating within a pressure range suitable for most pneumatic systems, the Janatics Polycarbonate Filter effectively removes contaminants such as dust, oil droplets, and moisture from the compressed air stream. This helps safeguard downstream pneumatic equipment, prolonging their lifespan and minimizing maintenance requirements. Constructed from high-quality polycarbonate material, this filter boasts durability and resistance to corrosion, making it suitable for use in demanding industrial environments. Its robust design ensures long-term reliability and performance, minimizing downtime and ensuring consistent operation of pneumatic systems. Installation of the Janatics Polycarbonate Filter is straightforward, facilitated by its user-friendly design and standardized fittings. This simplifies setup processes, reducing installation time and effort while ensuring a secure and precise fit within pneumatic systems. In summary, the Janatics Polycarbonate Filter rated for 10 Bar offers reliability, efficiency, and durability in maintaining the purity of compressed air in pneumatic systems. With its precise filtration capabilities and robust construction, this filter provides operators with a dependable solution for ensuring optimal performance and productivity across various industrial applications.

Type of Product : Filter

Thread Type : BSP

Bowl material : Polycarbonate

Temperature : 5°Cto50°C

Drain Arrangement : Manual Drain

Maximum Working Pressure : 10Bar

TECHNO 6.35 mm (1/4 inch) FRL with Metal Guard & Gauge, TC 2010-02

Ships within 24 hrs

TECHNO 6.35 mm (1/4 inch) FRL with Metal Guard & Gauge, TC 2010-02

By TECHNO

₹1,533 ~~₹1,888~~

You save ₹355!

18.8% OFF

Note :-Non Returnable "" "

Akari 9.50 mm(3/8 Inch) Air Lubricator With Metal Guard AL3000-03

Ships within 24 hrs

Akari Air Lubricator With Metal Guard (Port Size 1/4 inch to 1 inch)

By AKARI

₹589 - ₹1,533

You save ₹231!

28.18% OFF

The Akari Filter Regulator & Air Lubricator (FRL) is an essential component for maintaining the performance and longevity of pneumatic systems. This unit integrates three critical functions into one compact device: filtration, regulation, and lubrication. The **filter** component effectively removes contaminants such as dust, dirt, and moisture from the compressed air, ensuring clean air flow that helps prevent damage to downstream equipment. The **regulator** allows precise control of air pressure, which is crucial for optimizing the performance of pneumatic tools and machinery. By adjusting the pressure settings, users can ensure consistent operation and protect sensitive components from over-pressurization. The **lubricator** adds a controlled amount of oil to the compressed air, providing necessary lubrication to moving parts and reducing wear and tear on the system. This helps in extending the service life of pneumatic tools and improving their efficiency. Designed for durability and ease of maintenance, the Akari FRL unit features a clear bowl for easy monitoring of filter condition and an adjustable pressure gauge for accurate readings. Its robust construction and user-friendly design make it an ideal choice for industrial applications where reliable air quality management is critical.

Type of Product : Air Lubricator With Metal Guard

Series : AL

Country of Origin : China

Pressure Range : 2 to 8 Bar

Return Policy : Non Returnable

Name of Manufacturer/Packer/Importer : Akari Pneumatics

Ships within 24 hrs

JELPC 12.7 mm (1/2 Inch) FRL AC4000-04

By JELPC

₹4,365 ~~₹4,838~~

You save ₹473!

9.78% OFF

OLD JIT

SMC 6.35 mm (1/4 inch) FR Unit AW20-02BG1-B

Ships within 24 hrs

SMC FR Unit (Air Fluid Type)

By SMC

₹2,477 - ₹8,023

The SMC FR Unit (Air Fluid Type) is a high-performance Filter-Regulator (FR) unit designed to ensure clean and regulated air supply in pneumatic systems. This unit combines air filtration and pressure regulation, improving the efficiency and longevity of connected pneumatic components. With a compact and lightweight design, the FR unit is easy to install and maintain, making it ideal for industrial automation, assembly lines, and compressed air systems. The filter removes contaminants such as dust, oil, and moisture from compressed air, while the regulator maintains stable pressure, preventing system fluctuations. The FR unit supports air as the working fluid and comes with adjustable pressure settings for flexibility in various applications. The high-quality construction ensures durability, corrosion resistance, and long service life. Suitable for robotics, manufacturing, and pneumatic control systems, this unit enhances system reliability and efficiency by delivering clean, controlled air flow.

Type of Product : FR Unit

Maximum Operating Pressure : 1 Mpa

Fluid Type : Air

SMC Rc 6.35 mm (1/4 inch) 24 V DC 2000 Type Electro-Pneumatic Regulator, ITV2050-312L3

Ships within 24 hrs

SMC Rc 6.35 mm (1/4 inch) 24 V DC 2000 Type Electro-Pneumatic Regulator, ITV2050-312L3

By SMC

₹27,139

SMC Rc 1/4 inch 24 V DC 2000 Type Electro-Pneumatic Regulator, designated as the ITV2050-312L3. Crafted with precision engineering by SMC, this electro-pneumatic regulator ensures precise control and accuracy in pneumatic systems.Operating seamlessly on a 24 V DC power supply, the ITV2050-312L3 provides reliable and consistent performance across various industrial applications. Its Rc 1/4 inch size offers efficient air regulation while maintaining space optimization, making it suitable for installations requiring medium-sized connections.With a maximum pressure rating of 2000 kPa, this electro-pneumatic regulator delivers precise control over air pressure levels, ensuring optimal system operation and performance. Its advanced design allows for easy adjustment and fine-tuning of pressure settings, providing precise control tailored to specific requirements.Equipped with cutting-edge electro-pneumatic technology, the ITV2050-312L3 ensures rapid response and accurate pressure regulation, enhancing system efficiency and productivity. Whether in manufacturing, automation, or any industry reliant on pneumatic systems, this regulator is a trusted solution for achieving consistent and reliable performance.Trust in SMC's legacy of excellence and innovation in pneumatic technology, and equip your systems with the ITV2050-312L3 electro-pneumatic regulator for superior control and peace of mind. Experience precise pressure regulation like never before, backed by the reliability and accuracy of SMC's advanced regulator technology.FeaturesStepless control of air pressure in proportion to electric signalsSensitivity: 0.2 kPa (100 kPa specification)Linearity: ±1% or less (F.S.)Hysteresis: 0.5% or less (F.S.)Communication: CC-Link, DeviceNetTM, PROFIBUS DP, RS-232C

Janatics BSP Metal 5 Microns Filter 6.35 mm (1/4 inch), F13611

Ships within 24 hrs

Janatics BSP Metal 5 Microns Filter

By Janatics

₹966 - ₹1,049

The Janatics BSP Metal 5 Microns Filter is an indispensable component in pneumatic systems, meticulously designed to ensure the purity and integrity of compressed air streams in industrial applications. Crafted with precision and durability, this filter offers reliable performance and contributes to the seamless operation of pneumatic equipment. Operating within a pressure range suitable for pneumatic systems, the Janatics BSP Metal Filter effectively removes contaminants from compressed air, ensuring optimal performance and longevity of downstream pneumatic components. With a filtration rating of 5 microns, it efficiently captures fine particles, oil droplets, and other impurities, safeguarding sensitive equipment from damage and minimizing maintenance requirements. Constructed from high-quality metal materials, this filter boasts durability and resistance to corrosion, making it suitable for use in demanding industrial environments. Its robust design ensures long-term reliability and performance, minimizing downtime and ensuring consistent operation of pneumatic systems. Installation of the Janatics BSP Metal Filter is straightforward, facilitated by its user-friendly design and standardized fittings. This simplifies setup processes, reducing installation time and effort while ensuring a secure and precise fit within pneumatic systems.

Type of Product : Filter

Thread Type : BSP

Bowl material : Metal

Filtration : 5 Microns

Techno 6.35 mm (1/4 inch) Festo Type Regulator DR-2000-02

Ships within 5 days

TECHNO Festo Type Regulator

By TECHNO

₹1,073 - ₹2,241

You save ₹579!

35.05% OFF

The TECHNO Festo Type Regulator, available in size 1/2-1/4 inch, is an essential component for precise control and management of air pressure in pneumatic systems. Designed to regulate the flow of compressed air, this device ensures consistent and reliable operation of pneumatic tools and equipment. With its durable construction and precise engineering, the TECHNO Festo Type Regulator offers accurate pressure control, allowing users to adjust and maintain desired pressure levels with ease. Its compact size and versatile sizing make it suitable for a wide range of pneumatic setups and applications. Whether used in industrial facilities, workshops, or manufacturing environments, this regulator helps optimize the performance of pneumatic systems, enhancing productivity and efficiency. By ensuring proper pressure regulation, it also helps prevent damage to pneumatic components and prolongs their lifespan. With the TECHNO Festo Type Regulator, users can achieve precise control over air pressure, leading to improved operation and performance of pneumatic machinery. This essential component is a reliable choice for maintaining optimal air pressure in various pneumatic systems, ultimately contributing to smoother operation and reduced downtime.

Type of Product : Festo Type Regulator

Operating Temperature : 5 to 50 °C

Port size : 2.845 mm

Working Medium : 40 micron

Color : Multi Color

Application : Industrial

Working Pressure : 10 kgf/cm²

Return Policy : Non Returnable

GENERIC 6.35 mm (1/4 inch) Air Regulator Filter Water Trap with Gauge, AFC2000

Ships within 5 days

GENERIC 6.35 mm (1/4 inch) Air Regulator Filter Water Trap with Gauge, AFC2000

By GENERIC

₹1,415

The Generic 1/4 inch Air Regulator Filter Water Trap with Gauge, model AFC2000, is an essential tool for anyone using compressed air systems, offering precise control, filtration, and moisture removal to ensure optimal performance of air-powered tools and equipment. This all-in-one unit is designed to maintain the quality of your compressed air, prolonging the life of your tools and improving overall efficiency. The AFC2000 combines three key functions: air regulation, filtration, and moisture trapping, all within a compact and durable design. The 1/4 inch NPT connection size makes it compatible with a wide range of air compressors and pneumatic tools, allowing for easy integration into existing systems. Whether you’re working in an automotive shop, an industrial setting, or a home garage, this air regulator filter is built to meet the demands of various applications. The air regulator allows for precise control of air pressure, ensuring that your tools receive the correct amount of air pressure for optimal operation. This feature is crucial for maintaining consistency in tasks like spray painting, airbrushing, and using pneumatic tools, where even slight variations in pressure can affect the quality of the work. The built-in gauge provides a clear, easy-to-read display of the current pressure, allowing for quick adjustments as needed. In addition to regulation, the AFC2000 includes a high-efficiency filter that removes contaminants such as dirt, dust, and particulates from the compressed air. This filtration process helps prevent damage to your tools and ensures that only clean, dry air reaches the equipment, which is particularly important for sensitive applications like painting or precision machining. The water trap, another critical component of this unit, effectively captures and removes moisture from the compressed air. Moisture can be a significant issue in compressed air systems, leading to corrosion, reduced efficiency, and potential damage to tools. The AFC2000’s water trap ensures that moisture is separated from the air before it reaches your tools, thus protecting them from the harmful effects of water vapor. Durability and ease of maintenance are key features of the AFC2000. The housing is made from robust materials that can withstand the rigors of industrial use, while the transparent bowl allows for easy monitoring of water and contaminants. The unit is also designed for quick disassembly, making it easy to clean or replace components when necessary. In conclusion, the Generic 1/4 inch Air Regulator Filter Water Trap with Gauge, AFC2000, is a versatile and reliable solution for anyone using compressed air systems. Its combination of precise air pressure control, effective filtration, and moisture removal ensures that your tools operate at their best, reducing downtime and extending their lifespan. Whether you’re a professional in need of a dependable air regulator or a DIY enthusiast looking to improve your workshop setup, the AFC2000 offers the performance and durability you need to keep your projects running smoothly.

Janatics Metal Filter Regulator Combination 20Bar FRC136134-MM

Ships within 4 days

Janatics Metal Filter Regulator Combination 20Bar FRC136134-MM

By Janatics

₹2,123

FESTO 6.35 mm (1/4 inch) 40 m filter LFR-1/4-D-MINI 159631

Ships within 3 days

FESTO D Series 40 µm Air Filter Regulator With Pressure Gauge (0.5-12 bar)

By FESTO

₹4,601 - ₹20,059

You save ₹270!

5.54% OFF

The FESTO D Series Air Filter Regulator with Pressure Gauge, featuring a 40 µm filtration capability for optimal air quality. This versatile unit operates within a pressure range of 0.5-12 bar, ensuring precise control and regulation of your pneumatic systems. The integrated pressure gauge provides clear and accurate pressure readings, facilitating easy monitoring and adjustment. Designed for durability and reliability, this air filter regulator effectively removes particulates to protect downstream equipment and enhance system performance. Upgrade your air preparation setup with the FESTO D Series Air Filter Regulator, where efficient filtration meets precise regulation for superior pneumatic control.

Type of Product : Air Filter Regulator

Series : D Series

Grade Of Filteration : 40 µm

Pressure Regulation Range : 0.5-12 bar

FESTO 1/2 Inch 40 m filter FRC-1/2-D-MIDI 159590

Ships within 3 days

FESTO D Series 40 μm Air Preparation Unit with Metal Bowl (0.5-12 bar)

By FESTO

₹7,787 - ₹28,319

The FESTO D Series Air Preparation Unit with Metal Bowl, featuring a 40 μm filter for optimal air quality. Designed to operate within a pressure range of 0.5-12 bar, this unit is perfect for ensuring clean and regulated air supply in various industrial applications. The robust metal bowl offers enhanced durability and long service life, even in demanding environments. With its precise filtration capability, the FESTO D Series Air Preparation Unit effectively removes particulates, ensuring efficient operation and protection of downstream equipment. Enhance your pneumatic system's performance and reliability with the FESTO D Series Air Preparation Unit, where superior air quality meets robust design.

Type of Product : Air Preparation Unit

Series : D Series

Operating Temperature : -10-60°C

Material : Metal

Bowl Guard : Metal Bowl Guard

Mounting position : Vertical +/- 5°

Grade Of Filteration : 40 µm

Pressure Regulation Range : 0.5-12 bar

Techno 12.7 mm (1/2 Inch) Air Filter with Auto Drain AF 4000-04D

Ships within 5 days

Techno 12.7 mm (1/2 Inch) Air Filter with Auto Drain AF 4000-04D

By TECHNO

₹1,651 ~~₹2,006~~

You save ₹355!

17.7% OFF

The Techno 1/2 inch Air Filter with Auto Drain AF 4000-04D, the ultimate solution for efficient air filtration in hydraulic and pneumatic systems. Designed with precision engineering and superior craftsmanship, this high-performance air filter element is specifically tailored to meet the demands of hydraulic and pneumatic applications, ensuring clean and reliable operation. With its compact size of 2-1/2 inches, this air filter element seamlessly integrates into a wide range of hydraulic and pneumatic systems, making it an ideal choice for industrial, automotive, and machinery applications. Whether you need to protect sensitive equipment or maintain optimal performance in your hydraulic or pneumatic systems, the Techno 2-1/2 inch Air Filter Element is the perfect solution. Equipped with advanced filtration technology, this filter element effectively removes contaminants from the air, such as dust, dirt, debris, and moisture. By keeping these harmful particles at bay, it prevents clogging and wear-and-tear on sensitive components, prolonging the lifespan of your equipment and ensuring smooth operation. Crafted with durability and longevity in mind, the Techno 2-1/2 inch Air Filter Element is built to withstand demanding industrial environments. It features a robust construction, utilizing high-quality materials that can endure high pressures, vibrations, and temperature fluctuations. This ensures reliable performance and protection for your hydraulic and pneumatic systems. Installation is quick and straightforward, thanks to the user-friendly design of this filter element. Simply connect it to your existing hydraulic or pneumatic system, and experience an immediate improvement in filtration efficiency and system performance. Routine maintenance and regular replacement of the filter element are recommended to optimize filtration effectiveness and maximize equipment longevity.

Techno 12.7 mm(1/2") Filter FRL Airtech Type QSL15

Ships within 5 days

TECHNO Filter FRL Airtech Type

By TECHNO

₹931 - ₹3,303

You save ₹308!

24.86% OFF

The TECHNO Filter FRL Airtech Type is an essential component designed to ensure clean and high-quality air supply in pneumatic systems. As part of an FRL (Filter, Regulator, Lubricator) unit following the Airtech Type specifications, this filter effectively removes contaminants, dirt, and moisture from compressed air, ensuring smooth and reliable operation of pneumatic tools and equipment. Ideal for various industrial and manufacturing applications, the TECHNO Filter FRL Airtech Type offers comprehensive air treatment solutions, maintaining clean and dry air supply to pneumatic components. Its compact design and versatile sizing make it suitable for a wide range of pneumatic setups, allowing for seamless integration and reliable operation. Equipped with a transparent housing, this filter enables easy monitoring of filter element condition, ensuring timely replacements for optimal performance. The filter effectively captures and traps airborne particles, preventing damage to pneumatic components and ensuring smooth operation of machinery. With its reliable air filtration mechanisms and durable construction, the TECHNO Filter FRL Airtech Type contributes to improved productivity and reduced maintenance costs in pneumatic systems. Whether used in factories, workshops, or other industrial settings, this filter ensures clean and high-quality air supply, enhancing the performance and longevity of pneumatic equipment.

Type of Product : Filter FRL Airtech Type

Series : Q

Application : Industrial

Return Policy : Non Returnable

Mercury Filter Lubricator With Gauge MFR+L04

Ships within 3 days

Mercury Filter Lubricator With Gauge MFR+L04

By Mercury

₹3,700

Airmax Air F+R+L (Filter+Regulator+Lubricator) Set - Standard with P.C. Bowl 50.8mm(2 Inch), AFRL-S-08

Ships within 4 days

Airmax Air F+R+L (Filter+Regulator+Lubricator) Set - Standard with Metal Bowl, AFRL-S Series

By Airmax

₹4,483 - ₹15,339

The Airmax Air F+R+L (Filter+Regulator+Lubricator) Set - Standard, AFRL-S Series, is a comprehensive solution for optimizing the performance and reliability of pneumatic systems. Designed for industrial applications, this set combines three essential components—an air filter, regulator, and lubricator—into one cohesive unit. Each component is housed in a durable pressure die-cast aluminum body with a robust metal, ensuring long-lasting performance and resistance to harsh industrial conditions. The air filter component effectively removes contaminants such as dust, dirt, and moisture from the compressed air, protecting downstream equipment and ensuring smooth operation. This filtration process helps prevent wear and tear on pneumatic tools and components, extending their service life and maintaining efficiency. The regulator in the AFRL-S Series provides precise control over air pressure, stabilizing fluctuations and delivering consistent output to the pneumatic system. This accurate regulation is crucial for maintaining optimal performance and safety in various applications, from manufacturing processes to automation systems. The regulator's easy-to-read gauge and conveniently placed adjustment knob allow for quick and precise pressure settings, enhancing user convenience and operational efficiency. The lubricator ensures that the air delivered to the system is adequately lubricated, reducing friction and wear on moving parts. This lubrication is vital for maintaining the longevity and reliability of pneumatic tools and machinery. The metal of the lubricator offers superior durability compared to plastic alternatives, providing enhanced protection against high-pressure environments and potential impacts.

Type of Product : Air F+R+L (Filter+Regulator+Lubricator) Set - Standard

Operating Pressure : Upto 10 Kg/cm²

Temperature : Up to 50˚C

Body Material : Aluminium Pressure Die Cast

Media : Compressed Air

Element : 25 Micron

RIH 12.7 mm (1/2 Inch) OilWater Separator Air Filter Pressure Regulator Combo, BFC-4000

Ships within 2 days

RIH 12.7 mm (1/2 Inch) OilWater Separator Air Filter Pressure Regulator Combo, BFC-4000

By RIH

Pack of 1 kit

₹1,651 ~~₹2,006~~

You save ₹355!

17.7% OFF

RIH 1/2inch Oil‑Water Separator Air Filter Pressure Regulator Combo Air Filter, BFC-4000 Filter regulators and air lubricators are integral components in pneumatic systems, each serving specific functions to ensure the efficiency, reliability, and longevity of the system. Filter regulators are multifaceted devices designed to perform two key roles: filtration and pressure regulation. They are installed in pneumatic systems to eliminate impurities and contaminants present in the compressed air. The filtration process involves passing the air through various filtration elements, such as mesh screens or porous materials, removing particles like dust, oil residue, moisture, and other pollutants that could potentially damage the system components. Simultaneously, the pressure regulator function maintains a consistent and controlled air pressure, crucial for optimal performance in pneumatic tools and equipment. Air lubricators, on the other hand, are responsible for adding a fine mist of lubricating oil into the compressed air stream. This lubrication process ensures smooth operation and extends the lifespan of pneumatic components by reducing friction and wear. The lubricator dispenses oil in precise proportions, creating a mist that uniformly coats the internal moving parts of pneumatic tools and machinery. Proper lubrication not only reduces maintenance requirements but also enhances the efficiency and reliability of the entire pneumatic system. Both filter regulators and air lubricators are typically combined into a single unit known as an FRL (Filter, Regulator, Lubricator) unit. This integration streamlines installation, maintenance, and operation, providing a comprehensive solution for managing compressed air quality, pressure, and lubrication in pneumatic systems. These components, working in tandem, contribute significantly to the performance, longevity, and efficiency of pneumatic systems across various industries, ensuring clean, regulated, and well-lubricated air for the optimal functioning of pneumatic tools, machinery, and automated processes. Regular maintenance and periodic checks are essential to guarantee their continued effectiveness and the sustained operation of pneumatic systems.

Techno 1 1/2" Regulator without Guage FRL Airtech Type QTY40

Ships within 5 days

TECHNO Regulator without Guage FRL Airtech Type

By TECHNO

₹978 - ₹3,067

You save ₹591!

16.16% OFF

The TECHNO Regulator without Gauge FRL Airtech Type is an essential component designed to regulate air pressure in pneumatic systems. As part of the FRL (Filter, Regulator, Lubricator) Airtech Type series, this regulator ensures consistent and precise control over air pressure without the inclusion of a gauge for pressure monitoring. Ideal for various industrial and manufacturing applications, the TECHNO Regulator without Gauge FRL Airtech Type maintains optimal air pressure levels to enhance the performance and longevity of pneumatic equipment. Its compact and efficient design simplifies installation and integration into pneumatic setups, offering reliable operation in a space-saving package. The regulator function of this device allows users to adjust and maintain desired air pressure levels accurately, ensuring consistent operation of pneumatic machinery. While it lacks a gauge for direct pressure monitoring, the regulator's robust construction and precise engineering guarantee reliable pressure regulation without the need for additional instrumentation. The TECHNO Regulator without Gauge FRL Airtech Type is suitable for use in factories, workshops, and other industrial environments where consistent air pressure control is critical. By maintaining stable air pressure, this regulator helps prevent damage to pneumatic components and ensures smooth operation of machinery, ultimately contributing to improved productivity and efficiency.

Type of Product : Regulator without Guage FRL Airtech Type

Series : Q

Application : Industrial

Return Policy : Non Returnable

Akari 19.05 mm (3/4 Inch) FR+L With Gauge and Metal Guard AC4010-06

Ships within 4 days

Akari FRL With Gauge and Metal Guard (Port Size 1/4 to 1 inch)

By AKARI

₹1,297 - ₹4,719

You save ₹933!

22.66% OFF

Type of Product : FRL With Gauge and Metal Guard

Series : AC

Features : Lightweight, Low Profile, Variety of Bowls and Drains, Compact Size

Country of Origin : China

Pressure Range : 2 to 8 Bar

Return Policy : Non Returnable

Name of Manufacturer/Packer/Importer : Akari Pneumatics

Aerotac 6.35 mm (1/4 inch) FR+L with Gauge with Guard AFC 2000

Ships within 4 days

Aerotac 6.35 mm (1/4 inch) FR+L with Gauge with Guard AFC 2000

By Aerotac

₹931 ~~₹1,239~~

You save ₹308!

24.86% OFF

Janatics Polycarbonate Filter Regulator Combination 10Bar FRC156334-A

Ships within 4 days

Janatics Polycarbonate Filter Regulator Combination 10Bar FRC156334-A

By Janatics

₹4,011

The Janatics Pneumatic Filter Regulator is a great addition to your pneumatic system. This filter regulator combines a filter and regulator together in one unit, ensuring that there are no leaks in your system. The Janatics Polycarbonate Filter Regulator Combination comes with an internal auto drain that will keep your system clean and free of debris. This high quality design and construction allows it to last for a long time, making it perfect for any pneumatic system. Additionally, this filter has an ambient temperature of 5 to 50 degrees Celsius and a drain type of auto, making it perfect for any pneumatic system. This Janatics Polycarbonate Filter Regulator Combination 10Bar FRC156334-A is a combination of a filter and regulator. It uses 100% polycarbonate material, which has excellent anti-corrosion properties, high temperature resistance and long service life. This filter also has an ambient temperature range from -50 degrees Celsius to 100 degrees Celsius. The regulator is equipped with a rotary valve for easy installation and use. The Janatics Polycarbonate Filter Regulator Combination 10Bar FRC156334-A is used in industrial applications where high purity air is required. The Janatics Polycarbonate Filter Regulator Combination 10Bar FRC156334-A has been designed for long life and high performance in harsh environments. This combination unit is comprised of a filter and a regulator valve with flow control capability. The combination unit is available in a variety of sizes and connecter configurations including: NPT, BSPT and BSPP. The Janatics Polycarbonate Filter Regulator Combination 10Bar FRC156334-A can be used for both positive or negative pressure applications depending on your needs.

Techno 12.7 mm (1/2 Inch) Filter and Regulator GFR3000-15

Ships within 5 days

TECHNO Filter and Regulator

By TECHNO

₹1,533 - ₹2,005

You save ₹591!

22.77% OFF

The TECHNO Filter and Regulator, available in size 1/2-1/4 inch, is a versatile and indispensable component designed to ensure optimal performance and reliability in pneumatic systems. Combining the functions of both a filter and a regulator in a single unit, this device effectively removes contaminants and moisture from compressed air while simultaneously regulating air pressure. With its compact and integrated design, the TECHNO Filter and Regulator offers a space-saving solution for pneumatic setups, making it suitable for various industrial and manufacturing applications. Its precise sizing ensures compatibility with a range of pneumatic systems, allowing for easy installation and seamless integration. The filter element of this device helps to remove dirt, debris, and moisture from the compressed air, ensuring clean and dry air supply to pneumatic tools and equipment. Meanwhile, the regulator function enables users to adjust and maintain desired air pressure levels with precision, ensuring consistent and reliable operation of pneumatic machinery. Whether used in factories, workshops, or other industrial settings, the TECHNO Filter and Regulator plays a crucial role in optimizing the performance and efficiency of pneumatic systems. By providing clean and regulated air supply, it helps prevent damage to pneumatic components and prolongs their lifespan, ultimately contributing to improved productivity and reduced downtime.

Type of Product : Filter and Regulator

Series : Airtech

Operating Temperature : 5 to 50 °C

Port size : 2.845 mm

Working Medium : 40 micron

Application : Industrial

Working Pressure : 10 kgf/cm²

Return Policy : Non Returnable

Hydint FP Series Air Filter & Regulator with Pressure Gauge 3/8 inch Aluminum Pressure Die Cast, FPFRC-14B

Ships within 3 days

Hydint FP Series Air Filter & Regulator with Pressure Gauge 3/8 inch Aluminum Pressure Die Cast, FPFRC-14B

By Hydint

₹1,651

The Hydint FP Series Air Filter & Regulator with Pressure Gauge 3/8 inch Aluminum Pressure Die Cast, FPFRC-14B is a comprehensive solution for managing air quality and pressure in pneumatic systems. Combining the functions of an air filter, regulator, and pressure gauge into a single unit, it ensures clean, regulated air supply while providing real-time pressure monitoring. The device typically consists of a sturdy housing that houses the integrated components: the air filter, regulator, and pressure gauge. The air filter portion employs a porous material or fibrous mesh to capture contaminants such as dust, pollen, and debris from the incoming air stream. This helps prevent damage to downstream equipment and ensures clean air circulation within the system. Simultaneously, the regulator function controls the output air pressure, maintaining it at a consistent level regardless of fluctuations in the input pressure. This regulation is crucial for optimizing the performance of pneumatic tools and equipment, ensuring smooth operation and preventing over-pressurization. Integrated into the unit is a pressure gauge, providing operators with real-time feedback on the air pressure within the system. This allows for precise adjustments to the pressure settings, ensuring they align with the requirements of specific applications or equipment. The combination of air filtration, pressure regulation, and monitoring offered by this device simplifies installation and maintenance, as operators only need to deal with a single unit rather than multiple separate components. Regular maintenance, including filter replacement and pressure adjustments, helps ensure consistent performance and prolongs the service life of pneumatic systems. In summary, an air filter & regulator with a pressure gauge provides comprehensive air management capabilities for pneumatic systems, offering filtration, regulation, and pressure monitoring in a single, convenient package. By maintaining clean, regulated air supply, it contributes to the efficient and reliable operation of pneumatic equipment across various industrial applications.

Techno 12.7 mm (1/2 Inch) Festo Type FR+L, DC-4001-04

Ships within 5 days

TECHNO FRL Festo Type (Size 1/2-1/4 Inch)

By TECHNO

₹2,477 - ₹4,011

You save ₹1,889!

32.02% OFF

The TECHNO FRL Festo Type, available in size 1/2-1/4 inch, is an essential component designed to ensure optimal air quality, pressure regulation, and lubrication in pneumatic systems. As part of an FRL (Filter, Regulator, Lubricator) unit, this device integrates three vital functions into a single compact package, following the renowned Festo type specifications. Ideal for various industrial and manufacturing applications, the TECHNO FRL Festo Type offers comprehensive air treatment solutions, maintaining clean, dry, and regulated air supply to pneumatic tools and equipment. Its compact design and versatile sizing make it suitable for a wide range of pneumatic setups, allowing for seamless integration and reliable operation. The filter element of the FRL effectively removes contaminants, dirt, and moisture from compressed air, preventing damage to pneumatic components and ensuring smooth operation of machinery. The regulator function allows users to adjust and maintain desired air pressure levels with precision, while the lubricator function provides necessary lubrication to reduce friction and wear. Equipped with transparent housings for the filter and lubricator, this FRL unit enables easy monitoring of filter and lubricant levels, ensuring timely replacements and refills for optimal performance. With its reliable air treatment mechanisms and durable construction, the TECHNO FRL Festo Type contributes to improved productivity and reduced maintenance costs in pneumatic systems, making it a preferred choice for Festo type applications in various industries.

Type of Product : FRL Festo Type

Application : Industrial

Return Policy : Non Returnable

Hydint FP Series Air Filter & Regulator with Pressure Gauge 25.4 mm (1 Inch) Aluminum Pressure Die Cast, FPFRC-17

Ships within 3 days

Hydint FP Series Air Filter & Regulator with Pressure Gauge 25.4 mm (1 Inch) Aluminum Pressure Die Cast, FPFRC-17

By Hydint

₹3,657

The Hydint FP Series Air Filter & Regulator with Pressure Gauge 1 inch Aluminum Pressure Die Cast, FPFRC-17 is a comprehensive solution for managing air quality and pressure in pneumatic systems. Combining the functions of an air filter, regulator, and pressure gauge into a single unit, it ensures clean, regulated air supply while providing real-time pressure monitoring. The device typically consists of a sturdy housing that houses the integrated components: the air filter, regulator, and pressure gauge. The air filter portion employs a porous material or fibrous mesh to capture contaminants such as dust, pollen, and debris from the incoming air stream. This helps prevent damage to downstream equipment and ensures clean air circulation within the system. Simultaneously, the regulator function controls the output air pressure, maintaining it at a consistent level regardless of fluctuations in the input pressure. This regulation is crucial for optimizing the performance of pneumatic tools and equipment, ensuring smooth operation and preventing over-pressurization. Integrated into the unit is a pressure gauge, providing operators with real-time feedback on the air pressure within the system. This allows for precise adjustments to the pressure settings, ensuring they align with the requirements of specific applications or equipment. The combination of air filtration, pressure regulation, and monitoring offered by this device simplifies installation and maintenance, as operators only need to deal with a single unit rather than multiple separate components. Regular maintenance, including filter replacement and pressure adjustments, helps ensure consistent performance and prolongs the service life of pneumatic systems. In summary, an air filter & regulator with a pressure gauge provides comprehensive air management capabilities for pneumatic systems, offering filtration, regulation, and pressure monitoring in a single, convenient package. By maintaining clean, regulated air supply, it contributes to the efficient and reliable operation of pneumatic equipment across various industrial applications.

Mercury Lubricator ML04 12.7 mm(1/2") BSP

Ships within 3 days

Mercury Lubricator ML0

By Mercury

₹754 - ₹2,949

The Mercury ML0 Lubricator is a high-performance pneumatic component designed to maintain optimal lubrication in compressed air systems, ensuring smooth operation and extended equipment life. By automatically mixing oil with the airflow, this lubricator reduces friction and wear in pneumatic tools, cylinders, and machinery, improving efficiency and durability. Built with high-quality, corrosion-resistant materials, the Mercury ML0 Lubricator offers long-lasting performance even in harsh industrial environments. Its transparent oil reservoir allows for easy oil level monitoring, while the precision-adjustable oil flow control ensures consistent lubrication tailored to your system's needs. Designed for quick installation and integration, the ML0 Lubricator is compatible with various compressed air systems and can be easily maintained for trouble-free operation. The leak-proof design prevents oil wastage, improving cost efficiency and system reliability. Ideal for use in manufacturing, automation, workshops, and air-powered systems, the Mercury ML0 Lubricator helps reduce maintenance downtime, increase equipment longevity, and enhance overall pneumatic performance.

Type of Product : Lubricator

Port size : 6.35 mm

Fluid : Air

Techno 6.35 mm (1/4 inch) FR with Plastic Guard & Gauge KAW 2000-02

Ships within 5 days

Techno 6.35 mm (1/4 inch) FR with Plastic Guard & Gauge KAW 2000-02

By TECHNO

₹778 ~~₹1,092~~

You save ₹314!

28.72% OFF

The Techno 1/4 inch FR with Plastic Guard & Gauge KAW 2000-02, a high-quality pneumatic component designed to provide efficient filtration and precise pressure regulation in various industrial applications. Meticulously engineered and crafted with precision, this versatile FR unit ensures optimal performance and reliable operation of your pneumatic systems. The Techno 1/4 inch FR with Plastic Guard & Gauge KAW 2000-02 is specifically designed to meet the demands of pneumatic systems requiring 1/4 inch fittings. It seamlessly integrates into automation, robotics, and machinery applications, offering essential functionality to enhance system performance. Equipped with advanced filtration technology, the FR unit effectively removes contaminants such as dust, dirt, and moisture from the compressed air. This ensures a clean air supply, preventing potential damage and clogging of pneumatic components, and increasing their lifespan. The efficient filtration also contributes to improved system performance and reduced maintenance requirements. The regulator feature of the Techno FR unit allows for precise pressure control within your pneumatic system. It enables you to set and maintain the desired pressure levels, ensuring optimal performance and efficiency. This precise pressure regulation is crucial in applications that require accurate control, positioning, and actuation. The plastic guard provides an additional layer of protection, shielding the unit from external impacts and ensuring the integrity of its components. It helps maintain the longevity of the FR unit and reduces the risk of damage or malfunction caused by accidental contact or environmental factors. The gauge provides accurate and real-time pressure monitoring, allowing for easy visual indication of the pressure levels within your system. This enables you to quickly identify any deviations or abnormalities, facilitating prompt troubleshooting and ensuring smooth operation. Crafted with durability and reliability in mind, the Techno FR unit features a robust construction and utilizes high-quality materials that resist corrosion and provide long-lasting performance. It is designed to withstand demanding industrial environments, ensuring reliable operation and minimizing downtime. Installation and adjustment are hassle-free, thanks to the user-friendly design of the unit. It can be easily integrated into your pneumatic system using standard fittings, facilitating quick and seamless setup. The gauge and plastic guard enhance usability and protection, respectively, adding convenience and reliability to your operations.

Techno 1" FRL with Metal Guard with Gauge AC 5010-10

Ships within 5 days

TECHNO Diaphragm for FRL

By TECHNO

₹1,297 - ₹5,073

You save ₹1,358!

21.12% OFF

The TECHNO FRL with Metal Guard and Gauge is a comprehensive air treatment unit designed to ensure efficient and reliable operation of pneumatic systems. Combining a Filter, Regulator, and Lubricator (FRL) with a metal guard for added protection and a gauge for precise pressure monitoring, this device offers complete air treatment solutions in a single package. Ideal for various industrial and manufacturing applications, the TECHNO FRL with Metal Guard and Gauge effectively filters out contaminants, regulates air pressure, and provides lubrication to pneumatic components. The metal guard enhances durability and protection, making it suitable for harsh operating environments where equipment is exposed to mechanical damage. Equipped with a gauge, this FRL unit allows users to monitor air pressure levels easily, ensuring that pneumatic systems operate within specified parameters. The transparent housings for the filter and lubricator enable visual inspection of filter and lubricant levels, facilitating timely replacements and refills for optimal performance. With its reliable air treatment mechanisms, durable metal guard, and precise pressure monitoring capabilities, the TECHNO FRL with Metal Guard and Gauge ensures smooth and efficient operation of pneumatic machinery. Whether used in factories, workshops, or other industrial settings, this comprehensive air treatment unit contributes to improved productivity and reduced maintenance costs in pneumatic systems.

Type of Product : DIAPHRAGM For FRL

Operating Temperature : 5 to 50 °C

Application : Industrial

Working Pressure : 10 kgf/cm2

Return Policy : Non Returnable

Techno 1 1/2" Lubricator FRL Airtech Type QIU 40

Ships within 5 days

TECHNO Lubricator FRL Airtech Type

By TECHNO

₹931 - ₹2,595

You save ₹1,063!

29.06% OFF

The TECHNO Lubricator FRL Airtech Type is an essential component designed to provide precise lubrication to pneumatic systems as part of an FRL (Filter, Regulator, Lubricator) unit. Engineered to enhance the performance and longevity of pneumatic tools and equipment, this lubricator ensures smooth and efficient operation by delivering a controlled amount of lubricant to pneumatic components. Ideal for various industrial and manufacturing applications, the TECHNO Lubricator FRL Airtech Type integrates seamlessly into FRL units, offering a comprehensive solution for air filtration, pressure regulation, and lubrication. Its compact and efficient design saves space and simplifies installation, making it suitable for a wide range of pneumatic setups. Equipped with adjustable drip rate settings, this lubricator allows users to customize lubrication according to specific requirements, providing flexibility and efficiency in lubrication management. The transparent housing enables easy monitoring of lubricant levels, ensuring timely refills and optimal performance. With its reliable lubrication mechanism and durable construction, the TECHNO Lubricator FRL Airtech Type offers consistent and reliable lubrication support for pneumatic components, contributing to improved productivity and reduced maintenance costs in pneumatic systems. Whether used in factories, workshops, or other industrial settings, this lubricator ensures smooth and efficient operation of pneumatic machinery in Airtech Type FRL applications.

Type of Product : Lubricator FRL Airtech Type

Series : Q

Application : Industrial

Return Policy : Non Returnable

Techno 12.7 mm(1/2") Lubricator with Metal Guard AL 4000-04

Ships within 5 days

TECHNO Lubricator with Metal Guard

By TECHNO

₹671 - ₹1,769

You save ₹190!

16.1% OFF

The TECHNO Lubricator with Metal Guard is an essential component designed to provide lubrication to pneumatic systems, ensuring smooth and efficient operation of pneumatic tools and equipment. Equipped with a durable metal guard, this lubricator offers enhanced protection and durability in demanding industrial environments. Ideal for various industrial and manufacturing applications, the TECHNO Lubricator with Metal Guard delivers a precise and controlled amount of lubricant to pneumatic components, reducing friction and wear for prolonged equipment lifespan. Its robust construction and reliable performance make it suitable for use in harsh operating conditions where protection against external elements is essential. The lubricator's metal guard provides added protection against impacts, debris, and other hazards, ensuring the integrity and longevity of the lubrication system. This feature makes the lubricator particularly well-suited for use in environments where equipment is subject to rough handling or exposure to mechanical damage. With its efficient lubrication mechanism and durable metal guard, the TECHNO Lubricator with Metal Guard offers reliable performance and extended service life, contributing to improved productivity and reduced maintenance costs in pneumatic systems. Whether used in factories, workshops, or other industrial settings, this lubricator provides essential lubrication support with enhanced protection for critical pneumatic components.

Type of Product : Lubricator with Metal Guard

Operating Temperature : 5 to 50 °C

Application : Industrial

Working Pressure : 10 kgf/cm2

Return Policy : Non Returnable

Aerotac 12.7 mm (1/2 Inch) Air Lubricator With Guard AL 4000-04

Ships within 4 days

Aerotac 12.7 mm (1/2 Inch) Air Lubricator With Guard AL 4000-04

By Aerotac

₹907 ~~₹1,180~~

You save ₹273!

23.14% OFF

Air Lubricator With Guard

Ships within 4 days

Janatics Metal Filter 20Bar F15633-MM

By Janatics

₹2,005

Ships within 4 days

Janatics Metal Lubricator 20Bar L1563-M

By Janatics

₹2,123

FESTO Filter Regulator 0-16Bar LOE-1-D-MAXI

Ships within 5 days

FESTO LOE Lubricator with Metal Bowl Guard (0-16 bar)

By FESTO

₹2,949 - ₹9,085

The FESTO LOE Lubricator with Metal Bowl Guard, designed to ensure optimal performance and longevity of your pneumatic systems. Operating within a pressure range of 0-16 bar, this lubricator precisely adds oil to the compressed air stream, reducing friction and wear on moving parts. The robust metal bowl guard provides enhanced protection and durability, making it suitable for demanding industrial environments. By maintaining proper lubrication, the FESTO LOE Lubricator helps improve efficiency and reduce maintenance costs. Enhance your pneumatic system's reliability with the FESTO LOE Lubricator, where superior lubrication meets robust protection for seamless operation.

Type of Product : Lubricator

Series : LOE

Material : PC

Operating Pressure : 0-16 bar

Bowl Guard : Metal Bowl Guard

Mounting position : Vertical +/-5°

Ambient Temperature : -10 °C to 60 °C

RIH Air Regulator Filter Lubricator Combination 1/2 Pneumatic Air Filter Regulator, AC 4010-04

Ships within 2 days

RIH Air Regulator Filter Lubricator Combination 1/2 Pneumatic Air Filter Regulator, AC 4010-04

By RIH

₹2,713 ~~₹3,442~~

You save ₹729!

21.18% OFF

RIH Air Regulator Filter Lubricator Combination 1/2 Pneumatic Air Filter Regulator, AC 4010-04 Filter regulators and air lubricators are integral components in pneumatic systems, each serving specific functions to ensure the efficiency, reliability, and longevity of the system. Filter regulators are multifaceted devices designed to perform two key roles: filtration and pressure regulation. They are installed in pneumatic systems to eliminate impurities and contaminants present in the compressed air. The filtration process involves passing the air through various filtration elements, such as mesh screens or porous materials, removing particles like dust, oil residue, moisture, and other pollutants that could potentially damage the system components. Simultaneously, the pressure regulator function maintains a consistent and controlled air pressure, crucial for optimal performance in pneumatic tools and equipment. Air lubricators, on the other hand, are responsible for adding a fine mist of lubricating oil into the compressed air stream. This lubrication process ensures smooth operation and extends the lifespan of pneumatic components by reducing friction and wear. The lubricator dispenses oil in precise proportions, creating a mist that uniformly coats the internal moving parts of pneumatic tools and machinery. Proper lubrication not only reduces maintenance requirements but also enhances the efficiency and reliability of the entire pneumatic system. Both filter regulators and air lubricators are typically combined into a single unit known as an FRL (Filter, Regulator, Lubricator) unit. This integration streamlines installation, maintenance, and operation, providing a comprehensive solution for managing compressed air quality, pressure, and lubrication in pneumatic systems. These components, working in tandem, contribute significantly to the performance, longevity, and efficiency of pneumatic systems across various industries, ensuring clean, regulated, and well-lubricated air for the optimal functioning of pneumatic tools, machinery, and automated processes. Regular maintenance and periodic checks are essential to guarantee their continued effectiveness and the sustained operation of pneumatic systems.

Akari 6.35 mm (1/4 inch) FR+L With Gauge and Without Guard AC2010-02

Ships within 4 days

Akari 6.35 mm (1/4 inch) FR+L With Gauge and Without Guard AC2010-02

By AKARI

₹1,132 ~~₹1,617~~

You save ₹485!

29.98% OFF

Akari AC2010-02 (Port Size 1/4" AC Series) FR+L With Gauge & Without Guard
Features :-
Light weight, Low Profile
Variety of Bowls and Drains, Compact SizeNote :-Non Returnable "

Ships within 3 days

Spac 25.4 mm (1 Inch) BSP FRL AC5010-10

By Spac

₹7,433 ~~₹10,896~~

You save ₹3,463!

31.78% OFF

Modular and compact type for easy and fast maintenanceSuitable for panel mountingNeed small installation spaceSuitable for those pneumatic systems which requires less spaceLubricator-fog/mist type lubricator for fine adjustment and propositional lubricationDrain Valve: Manual

Page 1 of 23 results

Product Name	Specifications	Expected Price	Dispatch Time	Discount
TECHNO 6.35 mm (1/4 inch) FRL with Metal Guard & Gauge, TC 2010-02	Operating Temperature 5 to 50 C \| Size 1/4 Inch	₹1,533	24 hrs	18.8% OFF
Techno 6.35 mm (1/4 inch) Festo Type Regulator DR-2000-02	Color Multi Color \| Operating Temperature 5 to 50 C	₹1,073	5 days	35.05% OFF
Techno 1 1/2" Filter FRL Airtech Type QSL40	Series Q \| Size 1-1/2 Inch	₹3,185	5 days	20.61% OFF
JELPC AFC2010-02 1/4 Inch FRL	Filtration U (Micron) 25m \| Operating Pressure (Bar) 2 to 8	₹1,096	3 days	22.6% OFF
Techno 6.35 mm (1/4") FR+L with Gauge Airtech Type AFC2000	Cup Capacity Water Filter Cup Capacity :15CC\nWater Cup Capacity: 25CC \| Display Analog	₹754	24 hrs	--
Techno 12.7 mm (1/2 Inch) Airtech FRL with Gauge, BFC4000	Size 1/2 Inch \| Size (Cm) 1.27 cm	₹1,651	24 hrs	--
Janatics Polycarbonate Filter 10Bar F13613	Bowl Material Polycarbonate \| Drain Arrangement Manual Drain	₹719	24 hrs	--
Aerotac 6.35 mm (1/4 inch) FR+L with Gauge with Guard AFC 2000	Port Size 6.35 mm \| Type FR+L with Gauge with Guard	₹931	4 days	24.86% OFF
Techno 12.7 mm(1/2") FRL with Gauge Airtech Type BFC-4000	Indiamart TRUE \| Size 1/2 Inch	₹1,887	24 hrs	1.29% OFF
GENERIC 6.35 mm (1/4 inch) Air Regulator Filter Water Trap with Gauge, AFC2000	Ensured Pressure Resistance 1.5MPa/p> \| Material Aluminum Alloy	₹1,415	5 days	--

Filter Regulator & Air Lubricator (Frl)

Top Selling Filter Regulator & Air Lubricator (Frl) Products Price List for January 2026