• Home /
• Hydraulics and Pneumatics /
• Hydraulic & Pneumatic Equipment /
• Hydraulic Machinery /
• Hydraulic Oil Filtration Machine

Have a question? Call us now at +91 9650660070

Hydraulic Oil Filtration Machine

Showing 32 out of 32 products

Sort by

Recommended New Price : Low to High Price : High to Low

Ships within 3 days

Kleenoil India MOBILE MFS-4*SDU/9788 125 kg Industrial Oil Filteration

By Kleenoil India

₹3,53,999  

Technical Features :
Electricals Motors=3phase 1450rpm,Flow rate =600lph,Tank Capacity=6000ltr, Dimension=1100*600*950
Key Features :
Removes contaminant particles down to less than 0.5 microns ,The filter act both bith by "Absoption and Adsoption process", Removes water up to capacity of cartridge in the same time the catridge, minute carbon,wear metal, and silicon are extracted from the oil ,Rare Earth Magnet" fitted in the Filter cartridge removes Ferrous Contamination,No machine downtime as oil is cleaned continuously while machine is in operation.Particulate contamination in accordance with BS5540 Part4: 1981 and ISO/DIS 4406 14/9, Equivalent to NAS1638 CLASS6 (hydraulic oil specification)
Prevents corrosion of component,Reduces component wear (seals, piston rods, pumps etc.) ,Reduces the incidence of sticking & worn value components , End to the need to change hydraulic fluids ,All properties of oil being cleaned are maintaine
There is no storage tank and oil is cleaned instantly , The only consumables are the filter cartridges which can be changed within minutes,Easy to operate, No expensive transformers,Can be used with virtually any petroleum/synthetic based oil.

Add to Cart Buy Now

Ships within 3 days

Matrix Industrial oil Filtration System Magnetic Filtration MN-150

By Matrix Filtration System

₹1,53,399  

MATRIX MAGNETIC FILTER Magnetic Filter uses high-intensity ‘rare earth’ Neodymium Magnet with 12,500 Gauss which is designed to remove sub-micron contamination like- ferrous, stainless steel, tungsten carbide, from industrial fluids such as coolants & oils can be use as a Coolant Filtration System. Removal of such particles results in increased fluid life ,improves the surface finish of your products, enhance component accuracy and reduces wear on your machinery and tools. Its uses permanent magnet so does not require any consumables and power to operate. it is available in three sizes and can we customized as per customer requirements, standard version available with a core of either three or five. How It Works Contaminated fluid enters the matrix magnetic filter via the inlet port and flow upside through the high intensity magnetic rods which attract and hold the contamination. Clean fluid comes out via outlet port. Unique Flow Technology The magnetic circuit is designed in such a manner that create unique flow path to flow the fluid when the filter is fully contaminated with particles and no Back pressure, generated. How to Clean To clean the filter first open the clamp then lift-out the contaminated magnetic rods and remove the contamination from the rods using the specially designed cleaning tool. Product data Suitable for Inline/offline filtration. Manually cleaned Full stainless steel construction-304 12,500 Gauss, high-intensity Neodymium magnet Temp range: 5°C to 80°C.

Add to Cart Buy Now

Ships within 3 days

Kleenoil India MOBILE MFS-8*SDU/9788 170 kg Industrial Oil Filteration

By Kleenoil India

₹5,39,912  

Technical Features :
Electricals Motors=3phase 1450rpm,Flow rate =600lph,Tank Capacity=10000ltr, Dimension=1100*600*1450
Key Features :
Removes contaminant particles down to less than 0.5 microns ,The filter act both bith by "Absoption and Adsoption process", Removes water up to capacity of cartridge in the same time the catridge, minute carbon,wear metal, and silicon are extracted from the oil ,Rare Earth Magnet" fitted in the Filter cartridge removes Ferrous Contamination,No machine downtime as oil is cleaned continuously while machine is in operation.Particulate contamination in accordance with BS5540 Part4: 1981 and ISO/DIS 4406 14/9, Equivalent to NAS1638 CLASS6 (hydraulic oil specification)
Prevents corrosion of components ,Reduces component wear (seals, piston rods, pumps etc.) ,Reduces the incidence of sticking & worn value components , End to the need to change hydraulic fluids ,All properties of oil being cleaned are maintaine
There is no storage tank and oil is cleaned instantly , The only consumables are the filter cartridges which can be changed within minutes,Easy to operate, No expensive transformers,Can be used with virtually any petroleum/synthetic based oil

Add to Cart Buy Now

Ships within 3 days

Kleenoil India MOBILE MFS-6*SDU/9788 150 kg Industrial Oil Filteration

By Kleenoil India

₹4,36,368  

Technical Features :
Electricals Motors=3phase 1450rpm,Flow rate =600lph,Tank Capacity=8000ltr, Dimension=1100*600*1200
Key Features :
Removes contaminant particles down to less than 0.5 microns ,The filter act both bith by "Absoption and Adsoption process", Removes water up to capacity of cartridge in the same time the catridge, minute carbon,wear metal, and silicon are extracted from the oil ,Rare Earth Magnet" fitted in the Filter cartridge removes Ferrous Contamination,No machine downtime as oil is cleaned continuously while machine is in operation.Particulate contamination in accordance with BS5540 Part4: 1981 and ISO/DIS 4406 14/9, Equivalent to NAS1638 CLASS6 (hydraulic oil specification)
Prevents corrosion of components,Reduces component wear (seals, piston rods, pumps etc.) ,Reduces the incidence of sticking & worn value components , End to the need to change hydraulic fluids ,All properties of oil being cleaned are maintaine
There is no storage tank and oil is cleaned instantly , The only consumables are the filter cartridges which can be changed within minutes,Easy to operate, No expensive transformers,Can be used with virtually any petroleum/synthetic based oil

Add to Cart Buy Now

Ships within 3 days

Kleenoil India MOBILE MFS-2*SDU/9788 100 kg Industrial Oil Filteration

By Kleenoil India

₹2,59,599  

Technical Features :
Electricals Motors=3phase 1450rpm,Flow rate =600lph,Tank Capacity=4000ltr, Dimension=1100*600*700
Key Features :
Removes contaminant particles down to less than 0.5 microns ,The filter act both bith by "Absoption and Adsoption process", Removes water up to capacity of cartridge in the same time the catridge, minute carbon,wear metal, and silicon are extracted from the oil ,Rare Earth Magnet" fitted in the Filter cartridge removes Ferrous Contamination,No machine downtime as oil is cleaned continuously while machine is in operation.Particulate contamination in accordance with BS5540 Part4: 1981 and ISO/DIS 4406 14/9, Equivalent to NAS1638 CLASS6 (hydraulic oil specification)
Prevents corrosion of components ,Reduces component wear (seals, piston rods, pumps etc.) ,Reduces the incidence of sticking & worn value components , End to the need to change hydraulic fluids ,All properties of oil being cleaned are maintaine
There is no storage tank and oil is cleaned instantly , The only consumables are the filter cartridges which can be changed within minutes,Easy to operate, No expensive transformers,Can be used with virtually any petroleum/synthetic based oil

Add to Cart Buy Now

Ships within 3 days

Kleenoil India MOBILE MFS-1*SDU/9788 80 kg Industrial Oil Filteration

By Kleenoil India

₹2,00,599  

Technical Features :
Electricals Motors=3phase 1450rpm,Flow rate =600lph,Tank Capacity=1500ltr, Dimension=1100*600*700
Key Features :
Removes contaminant particles down to less than 0.5 microns ,The filter act both bith by "Absoption and Adsoption process", Removes water up to capacity of cartridge in the same time the catridge, minute carbon,wear metal, and silicon are extracted from the oil ,Rare Earth Magnet" fitted in the Filter cartridge removes Ferrous Contamination,No machine downtime as oil is cleaned continuously while machine is in operation.Particulate contamination in accordance with BS5540 Part4: 1981 and ISO/DIS 4406 14/9, Equivalent to NAS1638 CLASS6 (hydraulic oil specification)
Prevents corrosion of components ,Reduces component wear (seals, piston rods, pumps etc.) ,Reduces the incidence of sticking & worn value components , End to the need to change hydraulic fluids ,All properties of oil being cleaned are maintaine
There is no storage tank and oil is cleaned instantly , The only consumables are the filter cartridges which can be changed within minutes,Easy to operate, No expensive transformers,Can be used with virtually any petroleum/synthetic based oil

Add to Cart Buy Now

Ships within 3 days

Matrix Industrial Oil Filtration System MFS-Single Filter

By Matrix Filtration System

₹1,88,799  

MATRIX FILTRATION SYSTEM Matrix Filtration System is a multi-purpose semi-automated Oil Cleaning Machine. This machine is designed to filter and maintain the industrial oils. Also can be used as a Hydraulic Oil Filtration Machine, Lube Oil Filtration Machine, Gear Oil Cleaning Machine and Turbine Oil Cleaning Machine, Oil Flushing Machine, and diesel type fuels. This machine can be permanently connected to large oil reservoirs and used as a mobile skid for small size oil tanks. With a wide range of filtration flow rates, it is suitable for various applications in different industries. Features Matrix Filtration System maintains the lube oil including hydraulic and turbine oils at NAS 6 or better. Removes contaminations down to less than 1 Micron. Maintains the rate of contamination removal higher than it is getting generated and is applicable to various viscosity grades upto 680 CST in different applications. Prevents contamination related failures of bearing and servo valves. This filtration system helps Extends oil life and maintained all oil properties. Its retards regeneration of continuous wears and hence improves machine Reliability and Productivity. Matrix Filtration System can also be used for recycling oil used in flushing applications.

Add to Cart Buy Now

Ships within 3 days

Hydax Atom-D Coolant Filteration Machine

By HYDAX

₹1,23,899   ₹5,52,240

You save ₹428,341!

77.56% OFF

Features : Size Width = 700 mm , Depth = 400 mm, Height = 1200 mm Weight 70 Kgs Electrical Single Phase , 230V 50 Hz , 2 KW during drying. Drying Action Drying action is cause by vacuum suction at the bottom and air blowing from the top. The whole system is to avoid an debris to fly out. Coolant collection Coolant or media cleaned out from the part is collected in the tank which can be drained out.There is a auto cut off when coolant tank gets filled up Cycle time Cycle time is settable from 0 to 999 seconds.

Add to Cart Buy Now

Ships within 3 days

Hydax Atom-Sr. Coolant Filteration Machine

By HYDAX

₹5,97,458   ₹8,74,380

You save ₹276,922!

31.67% OFF

Features : Atom-Sr. is designed to remove coolant, swarf and oil form machine tool sumps, separates particles, and returns cleanfiltered coolant back to the tank. This process is done continuously by using a power module for suction and an independent pump for return. Atom-Sr. can be used as a maintenance machine, where one can wheel it around between machines an clean coolant from its tanks. Atom-Sr. can be used for coolant disposal. Atom-Sr. can be used on any type of media which is not corrosive. Continuous Suction Filter : The suction rate of the machine is over 2 liters per second with continuous discharge as mentioned below. Independent Filter : Atom-Sr. independent filter enables 37 liters of swarf to be collected and easily removed. Advantages : Avoid contamination of coolant after grinding. Better accuracy and consistency of grinding process and machining process. Longer coolant life as coolant gets aeriated, kills bacteria and improves tool life.

Add to Cart Buy Now

Ships within 12 days

Hydax Atom Coolant Filteration Machine

By HYDAX

₹83,779   ₹3,37,480

You save ₹253,701!

75.18% OFF

Features : Elimination of paper band filter and magnetic separator. Avoid contamination of coolant after grinding. Better accuracy and consistency of grinding process and machining process Longer coolant life as coolant gets aeriated, kills bacteria and improves tool life Atom can be used as a maintenance machine, where one can wheel it around between machines an clean coolant from its tanks. Atom can be used on any type of media which is not corrosive. Continuous Suction filter : The suction rate of the machine is over 3 liters per second with continuous discharge as mentioned below. Independent Filter : Atom's independent filter enables 37 liters of swarfto be collected and easily removed.

Add to Cart Buy Now

Ships within 30 days

Kleenoil India STATIC SMFS-1*SDU/9788 60 kg Industrial Oil Filteration

By Kleenoil India

0 of null undefined

₹1,41,599  

Technical Features :
Electricals Motors=3phase 1450rpm,Flow rate =600lph,Tank Capacity=1500ltr, Dimension=750*600*400
Key Features :
Removes contaminant particles down to less than 0.5 microns ,The filter act both bith by "Absoption and Adsoption process", Removes water up to capacity of cartridge in the same time the catridge, minute carbon,wear metal, and silicon are extracted from the oil ,Rare Earth Magnet" fitted in the Filter cartridge removes Ferrous Contamination,No machine downtime as oil is cleaned continuously while machine is in operation.Particulate contamination in accordance with BS5540 Part4: 1981 and ISO/DIS 4406 14/9, Equivalent to NAS1638 CLASS6 (hydraulic oil specification)
Prevents corrosion of components ,Reduces component wear (seals, piston rods, pumps etc.) ,Reduces the incidence of sticking & worn value components , End to the need to change hydraulic fluids ,All properties of oil being cleaned are maintaine.
There is no storage tank and oil is cleaned instantly , The only consumables are the filter cartridges which can be changed within minutes,Easy to operate, No expensive transformers,Can be used with virtually any petroleum/synthetic based oil.

Add to Cart Buy Now

Ships within 30 days

Kleenoil India LASER PARTICLE COUNTER 3 kg INDUSTRIAL OIL

By Kleenoil India

0 of null undefined

₹3,18,599   ₹3,32,951

You save ₹14,352!

4.31% OFF

Technical Features :
500 bar pressure , Flow rate: 0.5 l/min , Alarm indication with relay for controlling systems ,Live ISO, NAS and SAE readings ,Accuracy is +/- half an ISO code. , Software runs on a standard PC with an RS232 port , Software compatible with Windows 7 , The software can handle up to 5 inputs via RS232 or up to 249 when used an RS485 converter
Key Features :
Used for proactive maintenance and on-line monitoring, the PC9001 is a continuous particle counter with instant LED readout, computer interface and software. It is simple to use, accurate and can be used as an alarm to notify you of any changes in contamination levels. The PC9001 software is ideal for finished component test results and reports for quality control, on-line flushing to report when clean levels have been reached, reporting and logs for archiving.

Add to Cart Buy Now

Ships within 30 days

Kleenoil India MM10/HP/50 MICROMAG HP50 20 kg Magnetic Filtration

By Kleenoil India

0 of null undefined

₹2,00,599   ₹2,11,781

You save ₹11,182!

5.28% OFF

Technical Features :
Flow Rate(ltrs /min)=100,Contamination Capacity(kgs)=2,Max.operating pressure(Bar)=50, Temperature range (°C)=0-140,Gauss=4500
Key Features :
Made up of Aluminium construction, Longer lasting Fluids,Easy clean,Compact.
Minimal Fluid loss, No disposal cost, Minimum running cost,Rapid return on investment, Maintain flow rate, No back pressure.

Add to Cart Buy Now

Ships within 30 days

Kleenoil India MM5/HP/50 MICROMAG HP50 15 kg Magnetic Filtration

By Kleenoil India

0 of null undefined

₹1,41,599   ₹1,47,821

You save ₹6,222!

4.21% OFF

Technical Features :
Flow Rate(ltrs /min)=70,Contamination Capacity(kgs)=1,Max.operating pressure(Bar)=50, Temperature range (°C)=0-140,Gauss=4500
Key Features :
Made up of Aluminium construction, Longer lasting Fluids,Easy clean,Compact.
Minimal Fluid loss, No disposal cost, Minimum running cost,Rapid return on investment, Maintain flow rate, No back pressure.

Add to Cart Buy Now

Ships within 30 days

Kleenoil India MM20 MICROMAG 11 kg Magnetic Filtration

By Kleenoil India

0 of null undefined

₹1,88,799   ₹1,96,203

You save ₹7,404!

3.77% OFF

Technical Features :
Flow Rate(ltrs /min)=100,Contamination Capacity(kgs)=2,Max.operating pressure(Bar)=12, Temperature range (°C)=5-50,Gauss=4500
Key Features :
Made up of SAN Plastic Bowl and aluminium lid Longer lasting Fluids,Easy clean,Compact.
Minimal Fluid loss, No disposal cost, Minimum running cost,Rapid return on investment, Maintain flow rate, No back pressure.

Add to Cart Buy Now

Ships within 30 days

Kleenoil India MM10 MICROMAG 8 kg Magnetic Filtration

By Kleenoil India

0 of null undefined

₹1,41,599  

Technical Features :
Flow Rate(ltrs /min)=100,Contamination Capacity(kgs)=2,Max.operating pressure(Bar)=12, Temperature range (°C)=5-50,Gauss=4500
Key Features :
Made up of SAN Plastic Bowl and aluminium lid Longer lasting Fluids,Easy clean,Compact.
Minimal Fluid loss, No disposal cost, Minimum running cost,Rapid return on investment, Maintain flow rate, No back pressure.

Add to Cart Buy Now

Ships within 30 days

Kleenoil India MM5 MICROMAG 7 kg Magnetic Filtration

By Kleenoil India

0 of null undefined

₹81,419  

Technical Features :
Flow Rate(ltrs /min)=70,Contamination Capacity(kgs)=1,Max.operating pressure(Bar)=12, Temperature range (°C)=5-50=,Gauss=4500
Key Features :
Made up of SAN Plastic Bowl and aluminium lid Longer lasting Fluids,Easy clean,Compact.
Minimal Fluid loss, No disposal cost, Minimum running cost,Rapid return on investment, Maintain flow rate, No back pressure.

Add to Cart Buy Now

Ships within 30 days

Kleenoil India HDU/9778 8 kg Industrial Oil Filteration

By Kleenoil India

0 of null undefined

₹54,279   ₹57,969

You save ₹3,690!

6.37% OFF

Technical Features :
TANK CAPACITY=UPTO 540,WATER RETENTION=.56lts,
Key Features :
The Kleenoil 'High Pressure' oil filter can be fitted on the 'by -pass 'basis to any hydraulic system or any equipment with oil at pressure upto 3000psi/200bar.
The flow through the Kleenoil filters is controlled to approximately 4lpm at 4psi. A flow rate which is low enough to have negligible effect on most 'system pressure',yet high enough to ensure that oil is being kept in 'as new 'condition 24/7
At a low speed ,it is possible to remove particles down to 1 micron (3 absolute) , remove 99.95% of all wtaer, greatly reducing machine and components wear.

Add to Cart Buy Now

Ships within 30 days

Kleenoil India FM-2.0(PLUS)-11000(GAUSS) 35 kg Magnetic Filtration

By Kleenoil India

0 of null undefined

₹6,13,940   ₹6,56,984

You save ₹43,044!

6.55% OFF

Technical Features :
Flow Rate(ltrs /min)=500,Contamination Capacity(kgs)=6,Max.operating pressure(Bar)=20, Temperature range (°C)=0-80,Gauss= 11000
Key Features :
Made up of fully stainless steel construction,high flow capability,Removes both magnetic and non magnetic contamination-optional mesh stainer,Dual flow technology suitable for application like griding and washing.
Minimal pressure drop, In line connection, ideal for use in harsh chemical environment

Add to Cart Buy Now

Ships within 30 days

Kleenoil India FM-2.0(PLUS)-4500(GAUSS) 35 kg Magnetic Filtration

By Kleenoil India

0 of null undefined

₹5,67,061   ₹6,06,818

You save ₹39,757!

6.55% OFF

Technical Features :
Flow Rate(ltrs /min)=500,Contamination Capacity(kgs)=6,Max.operating pressure(Bar)=20, Temperature range (°C)=0-80,Gauss=4500
Key Features :
Made up of fully stainless steel construction,high flow capability,Removes both magnetic and non magnetic contamination-optional mesh stainer,Dual flow technology.
Minimal pressure drop, In line connection, ideal for use in harsh chemical environment

Add to Cart Buy Now

Ships within 30 days

Kleenoil India FM-1.5(PLUS)-11000(GAUSS) 30 kg Magnetic Filtration

By Kleenoil India

0 of null undefined

₹4,47,259  

Technical Features :
Flow Rate(ltrs /min)=250,Contamination Capacity(kgs)=3,Max.operating pressure(Bar)=20, Temperature range (°C)=0-80,Gauss=11000
Key Features :
Made up of fully stainless steel construction,high flow capability,Removes both magnetic and non magnetic contamination-optional mesh stainer,Dual flow technology.
Minimal pressure drop, In line connection, ideal for use in harsh chemical environment

Add to Cart Buy Now

Ships within 30 days

Kleenoil India FM-1.5(PLUS)-4500(GAUSS) Magnetic Filtration

By Kleenoil India

0 of null undefined

₹4,24,799  

Technical Features :
Flow Rate(ltrs /min)=250,Contamination Capacity(kgs)=3,Max.operating pressure(Bar)=20, Temperature range (°C)=0-80, Gauss=4500
Key Features :
Made up of fully stainless steel construction,high flow capability,Removes both magnetic and non magnetic contamination-optional mesh stainer,Dual flow technology.
Minimal pressure drop, In line connection, ideal for use in harsh chemical environment

Add to Cart Buy Now

Ships within 30 days

Kleenoil India FM 2.5 FILTRAMAG 23 kg Magnetic Filtration

By Kleenoil India

0 of null undefined

₹3,18,599   ₹3,39,491

You save ₹20,892!

6.15% OFF

Technical Features :
Flow Rate(ltrs /min)=500,Contamination Capacity(kgs)=6,Max.operating pressure(Bar)=10, Temperature range (°C)=0-80,Gauss =11000
Key Features :
Made up of fully stainless steel construction,Higher flow, higher contamination.
Inline/offline filtration,Manually Cleaned,11000 Gauss high -intensity magnets

Add to Cart Buy Now

Ships within 30 days

Kleenoil India FM 1.5 FILTRAMAG 17 kg Magnetic Filtration

By Kleenoil India

0 of null undefined

₹2,35,999  

Technical Features :
Flow Rate(ltrs /min)=250,Contamination Capacity(kgs)=3,Max.operating pressure(Bar)=10, Temperature range (°C)=0-80,Gauss =11000
Key Features :
Made up of fully stainless steel construction,Higher flow, higher contamination.
Inline/offline filtration,Manually Cleaned,11000 Gauss high -intensity magnets

Add to Cart Buy Now

Ships within 30 days

Kleenoil India MM20/HP/80 MICROMAG HP80 25 kg Magnetic Filtration

By Kleenoil India

0 of null undefined

₹4,12,999  

Technical Features :
Flow Rate(ltrs /min)=150,Contamination Capacity(kgs)=4,Max.operating pressure(Bar)=80, Temperature range (°C)=0-140,Gauss=4500
Key Features :
Made up of stainless steel, Longer lasting Fluids,Easy clean.
Minimal Fluid loss, No disposal cost, Minimum running cost,Rapid return on investment, Maintain flow rate, No back pressure.

Add to Cart Buy Now

Ships within 30 days

Kleenoil India MM10/HP/80 MICROMAG HP80 20 kg Magnetic Filtration

By Kleenoil India

0 of null undefined

₹2,94,999  

Technical Features :
Flow Rate(ltrs /min)=100,Contamination Capacity(kgs)=2,Max.operating pressure(Bar)=80, Temperature range (°C)=0-140,Gauss=4500
Key Features :
Made up of stainless steel, Longer lasting Fluids,Easy clean.
Minimal Fluid loss, No disposal cost, Minimum running cost,Rapid return on investment, Maintain flow rate, No back pressure.

Add to Cart Buy Now

Ships within 30 days

Kleenoil India MM5/HP/80 MICROMAG HP80 15 kg Magnetic Filtration

By Kleenoil India

0 of null undefined

₹1,88,799  

Technical Features :
Flow Rate(ltrs /min)=70,Contamination Capacity(kgs)=1,Max.operating pressure(Bar)=80, Temperature range (°C)=0-140,Gauss=4500
Key Features :
Made up of stainless steel, Longer lasting Fluids,Easy clean.
Minimal Fluid loss, No disposal cost, Minimum running cost,Rapid return on investment, Maintain flow rate, No back pressure.

Add to Cart Buy Now

Ships within 30 days

Kleenoil India MM20/HP/50 MICROMAG HP50 25 kg Magnetic Filtration

By Kleenoil India

0 of null undefined

₹3,53,999  

Technical Features :
Flow Rate(ltrs /min)=150,Contamination Capacity(kgs)=4,Max.operating pressure(Bar)=50, Temperature range (°C)=0-140,Gauss=4500
Key Features :
Made up of Aluminium construction, Longer lasting Fluids,Easy clean,Compact.
Minimal Fluid loss, No disposal cost, Minimum running cost,Rapid return on investment, Maintain flow rate, No back pressure.

Add to Cart Buy Now

Ships within 30 days

Kleenoil India OIL PATCH TESTING KIT TESTING KIT 20 kg INDUSTRIAL OIL

By Kleenoil India

0 of null undefined

₹27,139  

Oil Patch Testing Kit is an oil analysis equipment. Now a days, oil analysis is not just important for the oil and lubricant industry, but also used in other industries like automotive, aerospace, energy supply etc. Previous studies shows that nearly 80% of all machine failures are related to oil contamination. Oil analysis is a proactive method that can save these industries considerable costs year on year. Oil analysis measures the contamination from surface degradation caused by mechanical wear and corrosion from integrated components such as hydraulic motors, piston, housing, etc. You can minimize your downtime and maximize your uptime with oil contamination control.
It comprises of:
Vacuum pump with flexible pipe
Conical flask, Funnel
Sintered glass membrane holder
Pincette; Metallic Clamp
500 ml plastic Benzene bottle
0.8 micron membrane filter paper(1 Box – 100Nos.)
100 X Microscope(Optional)

Add to Cart Buy Now

Ships within 30 days

Kleenoil India SDU/9778 10 kg Industrial Oil Filteration

By Kleenoil India

0 of null undefined

₹62,539   ₹66,888

You save ₹4,349!

6.5% OFF

Technical Features :
TANK CAPACITY=UPTO 1350,WATER RETENTION=1.20lts,
Key Features :
The Kleenoil 'High Pressure' oil filter can be fitted on the 'by -pass 'basis to any engine system or any equipment with oil at pressure upto 3000psi/200bar.
The flow through the Kleenoil filters is controlled to approximately 4lpm at 4psi. A flow rate which is low enough to have negligible effect on most 'system pressure',yet high enough to ensure that oil is being kept in 'as new 'condition 24/7
At a low speed ,it is possible to remove particles down to 1 micron (3 absolute) , remove 99.95% of all wtaer, greatly reducing engine and components wear.

Add to Cart Buy Now

Ships within 30 days

Kleenoil India KU/95 10 kg Industrial Oil Filteration

By Kleenoil India

0 of null undefined

₹58,999   ₹62,428

You save ₹3,429!

5.49% OFF

Technical Features :
TANK CAPACITY=UPTO 1000,WATER RETENTION=.95lts,
Key Features :
The Kleenoil 'High Pressure' oil filter can be fitted on the 'by -pass 'basis to any engine system or any equipment with oil at pressure upto 3000psi/200bar.
The flow through the Kleenoil filters is controlled to approximately 4lpm at 4psi. A flow rate which is low enough to have negligible effect on most 'system pressure',yet high enough to ensure that oil is being kept in 'as new 'condition 24/7
At a low speed ,it is possible to remove particles down to 1 micron (3 absolute) , remove 99.95% of all wtaer, greatly reducing engine and components wear.

Add to Cart Buy Now

Ships within 19 days

RS PRO 10 unit Box Oil Test Kit and Analysis Service for Automotive, Industrial Machinery and Manufacturing, Marine, 2214799

By RS PRO

₹612  

RS PRO 10 unit Box Oil Test Kit and Analysis Service for Automotive, Industrial Machinery and Manufacturing, Marine, 2214799The RS PRO Oil Test Kit is an indispensable diagnostic tool designed to assess and analyze the condition of lubricating oil in various industrial and mechanical applications. Renowned for its accuracy, reliability, and comprehensive testing capabilities, this kit is an essential asset for maintenance professionals and organizations seeking to ensure the health and longevity of machinery and equipment. Crafted with meticulous precision, the RS PRO Oil Test Kit includes a range of testing equipment and reagents tailored for evaluating key oil parameters, including viscosity, acidity, contamination, and wear particles. It is engineered to provide timely and actionable insights into oil quality and machinery health. This oil test kit is suitable for a wide array of industries, from manufacturing and transportation to power generation and heavy machinery maintenance. It enables users to proactively monitor oil conditions, detect issues early, and implement maintenance or oil change schedules to prevent equipment breakdowns and reduce operational costs. The user-friendly design of the RS PRO Oil Test Kit often includes clear instructions, easy-to-use testing equipment, and compact storage options for convenient field or laboratory use. Its precision testing capabilities empower professionals to make informed decisions about oil change intervals, component wear, and maintenance requirements. Whether you're a maintenance engineer, reliability specialist, or machinery operator, the RS PRO Oil Test Kit delivers consistent quality and performance. It is a trusted choice for professionals and organizations, offering reliability, versatility, and peace of mind for all your oil analysis needs. When you require a comprehensive and dependable oil testing solution for optimizing machinery performance and minimizing downtime, the RS PRO Oil Test Kit is the ideal choice for ensuring equipment longevity and operational efficiency.

Add to Cart Buy Now

Previous Next

Page 1 of 1 results