Have a question? Call us now at +91 9650660070

Motor Drivers

Showing 19 out of 19 products

Sort by

Invento 7V to 30V Driver Stepper Motor Driver Board ISC 1619-2

Ships within 3 days

Invento 7V to 30V Driver Stepper Motor Driver Board ISC 1619

By Invento

Pack of 5 piece

₹530 - ₹1,887

You save ₹1,653!

46.69% OFF

The Invento 7V to 30V Driver Stepper Motor Driver Board is an essential component for controlling stepper motors in various precision motion control applications. This driver board is designed to efficiently regulate and drive stepper motors within a wide voltage range of 7V to 30V, making it suitable for a diverse range of projects and systems.The driver board incorporates built-in protection features to safeguard the board and connected components from potential damage due to electrical faults or overloading. These protection features may include overcurrent protection, overtemperature protection, and reverse polarity protection, enhancing the reliability and safety of the motor control system

Type of Product : Driver Stepper Motor Driver Board

Voltage : 7V to 30V

Current Range : 150mA / phase to 750mA /Phase

Invento 2 Channel 2V-10V Motor Drive Module ISC 1618-5

Ships within 3 days

Invento 1.5 -2.5 A 2 Phase Motor Drive Module ISC 1618

By Invento

Pack of 10 piece

₹365 - ₹1,533

You save ₹827!

35.04% OFF

The Invento Motor Drive Module is a versatile and essential component for controlling the speed and direction of DC motors in various robotics, automation, and DIY electronics projects. This module acts as an interface between microcontrollers or other control systems and DC motors, providing convenient and efficient motor control capabilities.The motor drive module incorporates built-in protection features, such as overcurrent protection and reverse polarity protection, to safeguard the module and connected components from damage due to electrical faults or misconnections. These protection features enhance the reliability and safety of the motor control system.

Type of Product : Motor Drive Module

Current : 1.5 to 2.5A

Phase : 2 Phase

Channel : 2 Channel

Voltage : 2V-10V

EASY ELECTRONICS L298 Motor Driver Module

Ships within 3 days

EASY ELECTRONICS L298 Motor Driver Module

By EASY ELECTRONICS

₹294 ~~₹499~~

You save ₹205!

41.08% OFF

The Easy Electronics L298 Motor Driver Module, a versatile and reliable solution for controlling DC motors and stepper motors in your robotics, automation, and DIY projects. This module provides efficient motor control with its dual H-bridge configuration and compatibility with a wide range of microcontrollers. The Easy Electronics L298 Motor Driver Module features the popular L298N chip, known for its robust performance and high power handling capabilities. It can control two DC motors or one stepper motor, allowing you to drive your motors with precision and control. The module supports a wide input voltage range, making it compatible with various power sources. With its easy-to-use interface, this motor driver module simplifies the process of controlling your motors. It features four input pins for controlling the direction and speed of the motors. By providing appropriate control signals from your microcontroller, you can achieve smooth and precise motor movements. The module also incorporates built-in protection features, including over-temperature and over-current protection, ensuring the longevity of your motors and the safety of your circuitry. The Easy Electronics L298 Motor Driver Module is designed for easy integration into your projects. It features convenient screw terminals for secure and reliable connections to your motors and power supply. The compact size of the module allows for flexible placement and compatibility with various project enclosures. This motor driver module is suitable for a wide range of applications, including robotics, automation, CNC machines, 3D printers, and more. Its versatility allows you to control motors of different types and sizes, providing flexibility in your project designs. The Easy Electronics L298 Motor Driver Module and unlock the potential of precise motor control in your projects. With its reliable performance, ease of use, and wide compatibility, this module is a valuable addition to any electronics enthusiast's toolkit. Drive your motors with confidence using the Easy Electronics L298 Motor Driver Module.

Vishay Motor Driver 8 Pin Count 2.5 Amp Maximum Output Current, VO3120 (Pack of 5)

Ships within 15 days

Vishay Motor Driver 8 Pin Count 2.5 Amp Maximum Output Current, VO3120 (Pack of 5)

By Vishay

Pack of 5 piece

₹1,297

Vishay Motor Driver 8 Pin Count 500 mA Maximum Output Current, VO3150A (Pack of 50)

Ships within 15 days

Vishay Motor Driver 8 Pin Count 500 mA Maximum Output Current, VO3150A (Pack of 50)

By Vishay

Pack of 50 piece

₹9,321

Vishay Motor Driver 8 Pin Count 500 mA Maximum Output Current, VO3150A

Ships within 15 days

Vishay Motor Driver 8 Pin Count 500 mA Maximum Output Current, VO3150A

By Vishay

₹223

MPS Brushless DC Motor Gate Driver Module 28-Pin, TSSOP-28 EP, MP6531AGF-P

Ships within 15 days

MPS Brushless DC Motor Gate Driver Module 28-Pin, TSSOP-28 EP, MP6531AGF-P

By MPS

₹376

MPS Brushless DC Motor Gate Driver Module 28-Pin, TSSOP-28 EP, MP6531AGF-P (Pack of 500)

Ships within 15 days

MPS Brushless DC Motor Gate Driver Module 28-Pin, TSSOP-28 EP, MP6531AGF-P (Pack of 500)

By MPS

Pack of 500 piece

₹1,53,399

MPS Brushed DC Motor Gate Driver Module 28-Pin, QFN-28, MP6528GR-P

Ships within 15 days

MPS Brushed DC Motor Gate Driver Module 28-Pin, QFN-28, MP6528GR-P

By MPS

₹341

MPS Brushed DC Motor Gate Driver Module 28-Pin, QFN-28, MP6528GR-P (Pack of 500)

Ships within 15 days

MPS Brushed DC Motor Gate Driver Module 28-Pin, QFN-28, MP6528GR-P (Pack of 500)

By MPS

Pack of 500 piece

₹1,29,799

Autonics Stepping Driver 24 - 35 VDC MD2U-MD20

Ships within 16 days

Autonics Stepping Driver 24 - 35 VDC MD2U-MD20

By Autonics

₹7,905 ~~₹12,051~~

You save ₹4,146!

34.41% OFF

Autonics AK-B Series A16K-G268 5-Phase stepper Motor Driver

Ships within 30 days

Autonics AK-B Series A16K-G268 5-Phase stepper Motor Driver

By Autonics

₹8,731

Stepper motor drivers receive pulse-width modulated (PWM) signals from a controlling unit such as a motion controller and transmits electric currents to stepper motors.Modern motor drivers provide the power and torque needed to drive unipolar or bipolar stepper motors. A computer or motion controller drives the driver which then sends signals to the motor.

Autonics Stepping Driver 100-220VAC MD5-HF28

Ships within 26 days

Autonics Stepping Driver 100-220VAC MD5-HF28

By Autonics

₹28,319

Siemens Motor Mechanism 6 A Current Rating, 3WA9111-0AF02

Ships within 45 days

Siemens Motorised Operating Mechanism

By Siemens

₹93,219 - ₹94,399

You save ₹52,753!

36.14% OFF

The Siemens Motorized Operating Mechanism is a sophisticated component used in electrical distribution systems to remotely operate high-voltage circuit breakers. It plays a crucial role in ensuring the reliable and efficient operation of power distribution networks by allowing operators to open and close circuit breakers remotely, reducing the need for manual intervention in hazardous environments.
Key features of the Siemens Motorized Operating Mechanism include:
Remote Operation: Enables operators to open and close circuit breakers from a safe distance, enhancing personnel safety during maintenance or emergency situations.
Precision Control: Offers precise control over the operation of circuit breakers, ensuring smooth and accurate switching to protect electrical equipment and prevent disruptions in power supply.
Integrated Safety Features: Equipped with safety interlocks and monitoring systems to detect abnormalities and automatically shut down the mechanism in case of faults, enhancing system reliability.
Compatibility: Designed to be compatible with a wide range of Siemens circuit breakers, providing versatility and ease of integration into existing electrical infrastructure.
Durable Construction: Built with robust materials and engineering to withstand harsh operating conditions, ensuring long-term reliability and minimal maintenance requirements.

Type of Product : Motor Mechanism

Series : ACB: SENTRON 3WA

Frequency : 50-60 Hz

Color : Silver

Ambient Temperature : -40 °C to 70 °C

TECHDELIVERS L298n Motor Driver Module for Arduino Raspberry Pi Electronics DIY Projects

Ships within 60 days

TECHDELIVERS L298n Motor Driver Module for Arduino Raspberry Pi Electronics DIY Projects

By TECHDELIVERS

₹317 ~~₹339~~

You save ₹22!

6.49% OFF

The TECHDELIVERS L298n Motor Driver Module for Arduino Raspberry Pi Electronics DIY Projects, short for Direct Current motor, is an electrical device that converts electrical energy into mechanical energy to produce rotational motion. It operates based on the principle of electromagnetic induction, where a current-carrying conductor placed in a magnetic field experiences a force that causes it to move. Key components and features of a typical DC motor include: 1. Armature: The armature is the rotating part of the DC motor, usually made of a coil of wire wound around a core. It is mounted on a shaft and rotates within the magnetic field. 2. Commutator: The commutator is a split ring attached to the shaft of the motor. It reverses the direction of the current flowing through the armature coil each time it completes half a rotation, which helps maintain the rotational motion in a single direction. 3. Brushes: Brushes are conductive contacts that press against the commutator, allowing the current to flow into the armature coil. They provide electrical connection between the power source and the rotating armature. 4. Permanent Magnets or Field Coils: The magnetic field in a DC motor is created either by permanent magnets or field coils. In permanent magnet DC motors, the magnets are fixed, while in field wound DC motors, the magnetic field is generated by field coils energized by the current. 5. Housing: The motor housing encloses and protects the internal components of the motor. It is usually made of metal or plastic. 6. Shaft: The motor shaft is the output shaft of the motor on which the load or mechanical device is connected. When the motor rotates, it drives the connected load. DC motors are used in a wide range of applications, such as robotics, industrial machinery, electric vehicles, fans, pumps, and various other devices requiring controlled rotational motion. The choice of the appropriate type of DC motor depends on the specific requirements of the application, including torque, speed, and efficiency considerations.

TECHDELIVERS L293D Motor Driver IC (Pack of 2 Piece)

Ships within 60 days

TECHDELIVERS L293D Motor Driver IC (Pack of 2 Piece)

By TECHDELIVERS

Pack of 2 piece

₹188 ~~₹269~~

You save ₹81!

30.11% OFF

The TECHDELIVERS L293D Motor Driver IC (Pack of 2 Piece), short for Direct Current motor, is an electrical device that converts electrical energy into mechanical energy to produce rotational motion. It operates based on the principle of electromagnetic induction, where a current-carrying conductor placed in a magnetic field experiences a force that causes it to move. Key components and features of a typical DC motor include: 1. Armature: The armature is the rotating part of the DC motor, usually made of a coil of wire wound around a core. It is mounted on a shaft and rotates within the magnetic field. 2. Commutator: The commutator is a split ring attached to the shaft of the motor. It reverses the direction of the current flowing through the armature coil each time it completes half a rotation, which helps maintain the rotational motion in a single direction. 3. Brushes: Brushes are conductive contacts that press against the commutator, allowing the current to flow into the armature coil. They provide electrical connection between the power source and the rotating armature. 4. Permanent Magnets or Field Coils: The magnetic field in a DC motor is created either by permanent magnets or field coils. In permanent magnet DC motors, the magnets are fixed, while in field wound DC motors, the magnetic field is generated by field coils energized by the current. 5. Housing: The motor housing encloses and protects the internal components of the motor. It is usually made of metal or plastic. 6. Shaft: The motor shaft is the output shaft of the motor on which the load or mechanical device is connected. When the motor rotates, it drives the connected load. DC motors are used in a wide range of applications, such as robotics, industrial machinery, electric vehicles, fans, pumps, and various other devices requiring controlled rotational motion. The choice of the appropriate type of DC motor depends on the specific requirements of the application, including torque, speed, and efficiency considerations.

TECHDELIVERS L293d Motor Driver IC with Base (Pack of 2 Piece)

Ships within 60 days

TECHDELIVERS L293d Motor Driver IC with Base (Pack of 2 Piece)

By TECHDELIVERS

Pack of 2 piece

₹211 ~~₹599~~

You save ₹388!

64.77% OFF

The TECHDELIVERS L293d Motor Driver IC with Base (Pack of 2 Piece), short for Direct Current motor, is an electrical device that converts electrical energy into mechanical energy to produce rotational motion. It operates based on the principle of electromagnetic induction, where a current-carrying conductor placed in a magnetic field experiences a force that causes it to move. Key components and features of a typical DC motor include: 1. Armature: The armature is the rotating part of the DC motor, usually made of a coil of wire wound around a core. It is mounted on a shaft and rotates within the magnetic field. 2. Commutator: The commutator is a split ring attached to the shaft of the motor. It reverses the direction of the current flowing through the armature coil each time it completes half a rotation, which helps maintain the rotational motion in a single direction. 3. Brushes: Brushes are conductive contacts that press against the commutator, allowing the current to flow into the armature coil. They provide electrical connection between the power source and the rotating armature. 4. Permanent Magnets or Field Coils: The magnetic field in a DC motor is created either by permanent magnets or field coils. In permanent magnet DC motors, the magnets are fixed, while in field wound DC motors, the magnetic field is generated by field coils energized by the current. 5. Housing: The motor housing encloses and protects the internal components of the motor. It is usually made of metal or plastic. 6. Shaft: The motor shaft is the output shaft of the motor on which the load or mechanical device is connected. When the motor rotates, it drives the connected load. DC motors are used in a wide range of applications, such as robotics, industrial machinery, electric vehicles, fans, pumps, and various other devices requiring controlled rotational motion. The choice of the appropriate type of DC motor depends on the specific requirements of the application, including torque, speed, and efficiency considerations.

TECHDELIVERS Motor Driver| Module| Board Shield for Arduino Raspberry| Pi Electronics DIY Projects L293d

Ships within 60 days

TECHDELIVERS Motor Driver| Module| Board Shield for Arduino Raspberry| Pi Electronics DIY Projects L293d

By TECHDELIVERS

₹211 ~~₹399~~

You save ₹188!

47.12% OFF

The TECHDELIVERS Motor Driver| Module| Board Shield for Arduino Raspberry| Pi Electronics DIY Projects L293d, short for Direct Current motor, is an electrical device that converts electrical energy into mechanical energy to produce rotational motion. It operates based on the principle of electromagnetic induction, where a current-carrying conductor placed in a magnetic field experiences a force that causes it to move. Key components and features of a typical DC motor include: 1. Armature: The armature is the rotating part of the DC motor, usually made of a coil of wire wound around a core. It is mounted on a shaft and rotates within the magnetic field. 2. Commutator: The commutator is a split ring attached to the shaft of the motor. It reverses the direction of the current flowing through the armature coil each time it completes half a rotation, which helps maintain the rotational motion in a single direction. 3. Brushes: Brushes are conductive contacts that press against the commutator, allowing the current to flow into the armature coil. They provide electrical connection between the power source and the rotating armature. 4. Permanent Magnets or Field Coils: The magnetic field in a DC motor is created either by permanent magnets or field coils. In permanent magnet DC motors, the magnets are fixed, while in field wound DC motors, the magnetic field is generated by field coils energized by the current. 5. Housing: The motor housing encloses and protects the internal components of the motor. It is usually made of metal or plastic. 6. Shaft: The motor shaft is the output shaft of the motor on which the load or mechanical device is connected. When the motor rotates, it drives the connected load. DC motors are used in a wide range of applications, such as robotics, industrial machinery, electric vehicles, fans, pumps, and various other devices requiring controlled rotational motion. The choice of the appropriate type of DC motor depends on the specific requirements of the application, including torque, speed, and efficiency considerations.

Ships within 90 days

Dayton Input/Output Module, 13E672

By Dayton

₹28,319

Dayton brand products are synonymous with reliability and innovation, catering to a diverse range of industrial and commercial needs worldwide. Renowned for their robust construction and precision engineering, Dayton offerings encompass solutions across various categories including electric motors, pumps, HVAC equipment, material handling tools, safety products, cleaning equipment, and electrical components. Each Dayton product exemplifies a commitment to quality and performance, ensuring they meet stringent industry standards and exceed customer expectations. Whether enhancing efficiency in manufacturing processes, maintaining optimal conditions in HVAC systems, or ensuring workplace safety, Dayton products are trusted for their durability, versatility, and ability to deliver consistent results in demanding environments.

Page 1 of 1 results

Product Name	Expected Price	Dispatch Time	Discount
EASY ELECTRONICS L298 Motor Driver Module	₹294	3 days	41.08% OFF
TECHDELIVERS L298n Motor Driver Module for Arduino Raspberry Pi Electronics DIY Projects	₹317	60 days	6.49% OFF

Motor Drivers

Top Selling Motor Drivers Products Price List for December 2025