View
View
View
View
| Output Voltage (V) | Maximum: three-phase 200/208/220/230/240 (supports input voltage) |
| Country of Origin | Japan |
| Output Frequency (Hz) | Maximum: Supports up to 400 with constant setting |
| Display | Display during charging: Displayed until the main circuit DC voltage drops to approximately 50 V or less |
Output Voltage (V) |
Maximum: three-phase 200/208/220/230/240 (supports input voltage) |
Country of Origin |
Japan |
Output Frequency (Hz) |
Maximum: Supports up to 400 with constant setting |
Display |
Display during charging: Displayed until the main circuit DC voltage drops to approximately 50 V or less |
Storage Temperature |
-20 to +60 ℃ (short term temperature during transportation) |
Type of Product |
Inverter G7 200V closed wall hanging type |
Protection Class |
Closed wall hanging type |
Model No |
CIMR-G7A20P41 |
Frequency Tolerance |
±5% |
Monotaro ID |
32010424 |
Import Country |
Direct Import from Japan |
Name of Manufacturer/Packer/Importer |
Yaskawa Electric Corporation |
Vibration |
Vibration Frequency: it is less than 10 to 20 Hz permissible to <sup>9.8m / s 2, 20 to 5.9m</sup> / s 2 at 55HZ |
Specifications |
[Power High Frequency Countermeasures] DC reactor: Optional, 12-phase rectification: Not applicable |
Control |
Sine wave PWM control [Vector control with PG, Vector 1 control without PG, Vector 2 control 1 without PG, V / f control without PG, V / f control with PG (switching by constant)] |
Protective Function |
Motor: Protection by electronic thermal, Undervoltage: 200V class: Stops when main circuit DC voltage is about 190V or less, 400V class: Stops when main circuit DC voltage is about 380V or less, Instantaneous power failure compensation: Stops after 15ms Setting), constant setting allows operation to continue after power failure recovery within about 2 seconds, heat sink overheat: protection with thermistor, ground fault protection: protection with electronic circuit |
Acceleration / Braking Time |
0.01 to 6000.0 seconds (Acceleration / deceleration individual setting: 4 types can be switched) |
Rated Input Current (A) |
3.8 |
Accuracy |
Torque: ± 5% |
Frequency Control range |
0.01 to 400Hz |
Braking Torque |
About 20% (about 125% using braking resistor option), 200 / 400V15kW or less has built-in braking transistor |
Response Speed |
10Hz (Vector control without PG), 40Hz (Vector control with PG) |
Control Function |
Instantaneous power failure restart, speed search, overtorque detection, torque limit, 17-speed operation (maximum), acceleration / deceleration time switching, S-shaped acceleration / deceleration, 3-wire sequence, auto tuning (rotary type, stop type), DWELL (dwell type) ) Function, cooling fan ON / OFF function, slip correction, torque compensation, frequency jump, frequency command upper and lower limit setting, DC braking at start / stop, high slip braking, PID control (with sleep function), energy saving control, memo bus communication (RS-485 / 422 maximum 19.2kbps), abnormal retry, constant copy, droop control, torque control, speed control / torque control switching operation, etc. |
Overload Withstand |
150% of rated output current for 1 minute, 200% for 0.5 seconds |
Rated Output Current (A) |
3.2 |
Rated Voltage (V) |
Three-phase AC power supply: 200/208/220/230/240 (50 / 60Hz), DC power supply: 270-340 |
3 options, 3 price levels
Volume discounts
Price locked 30 days