Have a question? Call us now at +91 9650660070

Mq135 Gas Sensor

Showing 40 out of 59785 products

Sort by

Generic MQ-6 Combustible Gas Propane/LPG Detector Sensor Module - SCPHPGC

Ships within 3 days

Generic MQ-6 Combustible Gas Propane/LPG Detector Sensor Module - SCPHPGC

By GENERIC

₹2,005

This sensor module utilizes an MQ-6 as the sensitive component and has a protection resistor and an adjustable resistor on board. The MQ-6 gas sensor is highly sensitive to LPG, iso-butane, propane and less sensitive to alcohol, cooking fume and cigarette smoke. It could be used in gas leakage detecting equipment in family and industry. The resistance of the ensitive component changes as the concentration of the target gas changes.
Features
Continuous Analog output
3-pin interlock connector
Low cost and compact size
Specification
High quality double panel design, with power and TTL signal output indicator
With DO switch signal (TTL) output and AO analog signal output
TTL output effective signal for low level (when output lower than usually the signal light, can be directly meet SCM or relay module)
Analog output voltage: 0~5V, the higher concentration, the higher voltage
High sensitivity for the propane and butane, LPG, LNG detection
There are four screw holes for positioning
Product size: 32mm (L) x 20mm (W) x 22mm (H)
Long service life and reliable stability, fast response and recovery characteristics
Suitable for home / industry LPG, propane, butane, LNG detection using
Before use, please heat the board for about 20 seconds

Generic MQ-135 Air Quality Sensor Module - MSDS

Ships within 3 days

Generic MQ-135 Air Quality Sensor Module - MSDS

By GENERIC

₹2,123

Features: good sensitivity of harmful gases with wide range of concentration, long life, low cost, simple driving circuit. High sensibility over ammonia gas, sulfide, benzene series vapor, also ideal for smoke and other harmful substance detection. This sensor can detect various harmful gases.
1 3 5 M Q is a low-cost sensor suitable for many applications.
Application:
Household air pollution alarm
Industrial air pollution controller
Portable air pollution detector
Attentions in using:
After power up, we need to rotate the varister to a proper area, normally the tipping point of on and off of light, remerber is in off state. At this moment, the sensor is in high sensitivity, even if there is only a little amount of harmful gas being detected, there will be signal from indicator light. Of course, you can adjust the sensitivity according to specific need.

Generic MQ-8 Hydrogen Gas Sensor Module H2 Alarm Detection - CPVKMCCWN3310CP

Ships within 3 days

Generic MQ-8 Hydrogen Gas Sensor Module H2 Alarm Detection - CPVKMCCWN3310CP

By GENERIC

₹1,179

MQ-8 gas sensor sensitive material used in clean air conductivity is lower tin dioxide (SnO2). When the sensor is present in the environment in which the combustible gas, the sensor's conductivity increases with the concentration of combustible gases in air increases. Using a simple circuit can be converted to the change in conductivity of the gas concentration with the corresponding output signal. MQ-8 hydrogen gas sensor of high sensitivity, the monitoring of the other hydrogen-containing gas is also very satisfactory. The sensor can detect a variety of hydrogen-containing gas, in particular, city gas, is a low-cost sensors for a variety of applications.
Module Applications:
Suitable for domestic or industrial hydrogen leak on a monitoring device. Are not subject to ethanol vapor, soot, carbon monoxide and other gases interference.
Module Features:
Using high-quality dual-panel design, with power indicator and TTL signal output instructions
With a DO switch signal (TTL) output and AO analog signal output
TTL output valid signal is low. (When the output low signal light can be directly connected microcontroller or relay module)
The analog output voltage, the higher the concentration the higher the voltage.
The hydrogen gas detection with better sensitivity.
There are four screw holes for easy positioning
Product Dimensions: 32 (L) * 20 (W) * 22 (H)
With a long service life and reliable stability
Rapid response and recovery characteristics
Electrical properties:
Input voltage: DC5V power (current): 150mA
DO output: TTL digital 0 and 1 (0.1 and 5V)
AO output :0.1-0 .3 V (relatively clean), the highest concentration of voltage around 4V
Special note: The sensor is powered, needs to warm up around 20S, measured data becomes stable, the sensor fever is a normal phenomenon, because the internal heating wire, if hot is not normal.

Generic MQ-2 Smoke Gas LPG Butane Hydrogen Sensor Module - SPCYI

Ships within 3 days

Generic MQ-2 Smoke Gas LPG Butane Hydrogen Sensor Module - SPCYI

By GENERIC

₹1,297

Two-way signal output (analog output and TTL level output)
TTL output, low level for valid signal.(when output low level, signal light is on, can directly connect MCU)
Analog output 0 ~ 5V voltage, the higher the concentration, the higher the voltage.
Good sensitivity for liquefied petroleum gas, natural gas and city gas.

Related Searches

omron cylindrical proximity sensor

as one plates

as one general laboratory equipments

molex sensor & relay

as one handle joint & bar

Greystone CO2 Sensor Concealed 0-2000ppm without Display CDD4A100

Ships within 5 days

Greystone CO2 Sensor Concealed 0-2000ppm without Display CDD4A100

By Greystone

₹24,779

The CDD4 series uses a highly accurate and reliable Non-dispersive Infrared (NDIR) sensor combined with state-of-the-art digital linearization and temperature compensated circuitry in an attractive, low profile enclosure for room applications to monitor room CO 2,levels. A linear analog signal output of 4-20 mA, 0-5 or 0-10 Vdc is provided for connection to a building automation system. Optional features such as temperaure sensor, setpoint adjustment, manual override and adjustible relay output are available.

Walnut Innovations Fire Smoke Sensor Detection Alert Alarm System

Ships within 3 days

Walnut Innovations Fire Smoke Sensor Detection Alert Alarm System

By Walnut Innovations

₹1,297

Walnut Innovations Fire Smoke Sensor Detection Alert Alarm System
1 year + 2 months extended warranty exclusively on IB
A smoke detector is a device that senses smoke, typically as an indicator of fire. Commercial security devices issue a signal to a fire alarm control panel as part of a fire alarm system, while household smoke detectors, also known as smoke alarms, generally issue a local audible or visual alarm from the detector itself.
Features
Battery Operated
Photoelectric Sensor
Low battery warning
Test Button
Sound & Flash Alarm
Loud 85dB alarm signal
Photoelectric Smoke Detector, Properly installed and maintained. Residential smoke alarms, are one of the best and least expensive ways to provide an early warning when a fire begins. Smoke alarms save lives, prevent injuries and minimize property damage by alerting resident early to a fire hazard.
9VDC battery operated Smoke Detector
Photoelectric Sensor, detecting from all directions
Low battery waring
Test button for easy recommended monthly testing
Ceiling or wall mounting
Flash alarm indicator (red LED)

Generic MQ7 - Carbon Monoxide Module - MQ7 co sensor

Ships within 3 days

Generic MQ7 - Carbon Monoxide Module - MQ7 co sensor

By GENERIC

₹1,179

This is a simple-to-use compressed natural gas (CNG) sensor, suitable for sensing natural gas (composed of mostly Methane [CH4]) concentrations in the air. The MQ-4 can detect natural gas concentrations anywhere from 200 to 10000ppm. This sensor has a high sensitivity and fast response time. The sensor's output is an analog resistance.
Good sensitivity to Combustible gas in wide range
High sensitivity to Natural gas
Long life and low cost
Simple drive circuit
The drive circuit is very simple; all you need to do is power the heater coil with 5V, add a load resistance, and connect the output to an ADC .This sensor comes in a package similar to our MQ-3 alcohol sensor.
Technical parameters:
Ambient temperature: -20 ~ + 55
Humidity: <=95%RH
Measure the voltage <=24V
Characteristics of gas: 5000 PPMM methane

Ships within 3 days

Generic LPG Sensor-MQ6 - CPVKARGC

By GENERIC

₹1,297

This is a simple-to-use liquefied petroleum gas (LPG)sensor, suitable for sensing LPG (composed of mostly propane and butane) concentrations in the air. The MQ-6 can detect gas concentrations anywhere from 200 to 10000ppm.
This sensor has a high sensitivity and fast response time. The sensor’s output is an analog resistance. The drive circuit is very simple; all you need to do is power the heater coil with 5V, add a load resistance, and connect the output to an ADC.

Ships within 3 days

Generic Alcohol Sensor MQ3 - ASMQ3

By GENERIC

₹1,415

This alcohol sensor is suitable for detecting alcohol concentration on your breath, just like your common breathalyzer. It has a high sensitivity and fast response time. Sensor provides an analog resistive output based on alcohol concentration. The drive circuit is very simple, all it needs is one resistor. A simple interface could be a 0-3.3V ADC.
Features:
5V DC or AC circuit
Requires heater voltage
Operation Temperature: -10 to 70 degrees C
Heater consumption: less than 750mW
Dimensions:
16.8mm diameter
9.3 mm height without the pins

Generic MQ-9 CO Carbon Monoxide methane liquefied Gas Sensor - CBLT

Ships within 3 days

Generic MQ-9 CO Carbon Monoxide methane liquefied Gas Sensor - CBLT

By GENERIC

₹2,359

MQ-9 Sensor Description:
Sensitive material MQ-9 gas sensor is used to clean the air in the lower conductivity of tin dioxide (SnO2). Detection method using low temperature cycling (1.5V heating ) to detect carbon monoxide, conductivity sensors with carbon monoxide in the air increased with increasing gas concentration , spurious adsorption at high temperatures (5.0V heating ) detection of combustible gases methane, propane and cryogenic cleaning gases. Simple circuit can be used to change the conductivity , concentration of the gas is converted to the corresponding output signal. MQ-9 high gas sensor for carbon monoxide, methane , liquefied petroleum gas sensitivity , the sensor can detect a variety of gases containing carbon monoxide and flammable , is a low-cost sensors for a variety of applications
Module Applications:
Suitable for home or factory gas leakage monitoring devices , monitoring devices suitable for carbon monoxide and other combustible gases , carbon monoxide can be tested 10 to 1000ppm CO, combustible gas range 100 to 10000ppm
Module Features :
Using high-quality dual-panel design, with power indicator and TTL signal output instructions
The switching signal having a DO (TTL) output and analog output AO
TTL output valid signal is low . ( Low-level signal when the output light can be directly connected to the microcontroller or relay module )
The higher the voltage of the analog output voltage with concentration higher
For the carbon monoxide detector has good sensitivity.
There are four screw holes for easy positioning
Product dimensions : 32 (L) * 20 (W) * 22 (H)
Has a long life and reliable stability
Rapid response and recovery characteristics
Electrical properties:
Input voltage : DC5V Power consumption ( current ): 150mA
DO output : TTL digital 0 and 1 ( 0.1 and 5V)
AO output :0.1-0 .3 V ( relative to pollution ) , the maximum concentration of a voltage of about 4V
Special note: After the sensor is powered , needs to warm up around 20S, measured data was stable , heat sensor is a normal phenomenon , because the internal heating wire , if hot is not normal

Generic MQ-5 liquefied gas Methane Gas Sensor Module - DCM

Ships within 3 days

Generic MQ-5 liquefied gas Methane Gas Sensor Module - DCM

By GENERIC

₹1,179

The gas sensing material used in MQ-5 gas sensor is two tin oxide (SnO2), which is lower in clean air.. When there is combustible gas in the environment, the electrical conductivity of the sensor increases with the increase of the combustible gas concentration in the air

Generic MQ-6 Liquefied Isobutane Propane Sensor Module - DCGMHG750RPM

Ships within 3 days

Generic MQ-6 Liquefied Isobutane Propane Sensor Module - DCGMHG750RPM

By GENERIC

₹1,533

MQ6 Liquefied Petroleum Gas Sensor isobutane propane gas module
100% Brand New and High Build Quality
Indication of the signal output
Dual signal output (analog output, and TTL level output)
TTL output signal is low. (When low output signal light, and can be connected directly to the microcontroller)
0 ~ 5V analog output voltage, the higher the concentration, the higher the voltage
High sensitivity to hydrogen
Can be resistant to ethanol steam, LPG (petroleum), smoke interference
Has a long life and reliable stability
Fast response and recovery characteristics

Ships within 3 days

Generic MQ3 Module

By GENERIC

₹1,533

Generic MQ-7 CO Carbon Monoxide Coal Gas Sensor Module - HTEC5M

Ships within 3 days

Generic MQ-7 CO Carbon Monoxide Coal Gas Sensor Module - HTEC5M

By GENERIC

₹2,005

Technical Data:
Heater Voltage: 5 ±0.2V（AC or DC）
Loop Voltage: 10V(≤15V DC)
Load Resistance: 10K(Adjustable)
Recovery Time: ≤ 30S
Features:
Signal output light indicator
Analog and level signal output
High and low level signal output signal for low level effectively, can be directly by single chip microcomputer
On carbon monoxide gas has high sensitivity and good selectivity
Has a long service life and reliable stability
Rapid response recovery features
Applications:
Mainly used in homes, factories, underground work indoor carbon monoxide gas detection

Generic MQ-4 Natural Gas Methane Gas Sensor Module - EC50V10UF

Ships within 3 days

Generic MQ-4 Natural Gas Methane Gas Sensor Module - EC50V10UF

By GENERIC

₹1,179

MQ4 Methane Gas Sensor Natural Coal Co methane detector for Arduino
100% Brand New and High Build Quality
Indication of the signal output
Dual signal output (analog output, and TTL level output)
TTL output signal is low. (When low output signal light, and can be connected directly to the microcontroller)
0 ~ 5V analog output voltage, the higher the concentration, the higher the voltage
Mainly used for testing for Methane Gas.
Has a long life and reliable stability
Fast response and recovery characteristics

Generic MQ-3 Alcohol Ethanol Sensor Module - SPCYP

Ships within 3 days

Generic MQ-3 Alcohol Ethanol Sensor Module - SPCYP

By GENERIC

₹1,415

Features:
High quality double panel design, with power indicator and TTL output signal.
Have DO switch signal(TTL) output and AO analog signal output.
TTL output signal for low level effectively. (when the low output electric signal lights at ordinary times, can be directly connect single chip microcomputer or relay module)
Analog output voltage with concentration, the higher concentration, the higher voltage.
Has better sensitivity with the liquefied petroleum gas, natural gas, city gas, smoke.
Has long service life and reliable stability
Rapid response recovery features
Specifications
Input voltage: DC5V
Power consumption (current) : 150 mA
DO output: TTL digital 1 and 0 (0.1 and 5 V)
AO output: 0.1-0.3 V (pollution-free)
Highest concentration of voltage: Approx 4 V
Detection range of alcohol: detection range of 10 ~ 1000 PPM
Connection mode:
VCC: Positive (5 v)
GND: Connect power negative
DO: TTL switch signal output
AO: Analog signal output

Greystone CO2 Sensor Viewable 0-2000ppm with Display CDD4B101

Ships within 5 days

Greystone CO2 Sensor Viewable 0-2000ppm with Display CDD4B101

By Greystone

₹48,379 ~~₹48,846~~

You save ₹467!

0.96% OFF

Greystone CO2 Sensor Concealed 0-2000ppm without Display CDD4B100

Ships within 5 days

Greystone CO2 Sensor Concealed 0-2000ppm without Display CDD4B100

By Greystone

₹33,039

Greystone CO2 Sensor Viewable 0-2000ppm with Display CDD4A101

Ships within 5 days

Greystone CO2 Sensor Viewable 0-2000ppm with Display CDD4A101

By Greystone

₹29,499

Ships within 5 days

Generic MQ2 Gas Sensor

By GENERIC

₹483

Generic MQ2 gas sensor is a device that can be used to detect and measure small amounts of volatile organic compounds. These sensors operate on the principle of chemical vapor sensing and are compatible with most microcontrollers. The sensors are also inexpensive and easy to use, making them a viable option for your next project.The MQ2 is a gas sensor that can be used to detect volatile organic compounds (VOCs). It is intended for commercial and industrial use, though hobbyists can also find ways to adapt it in their own creative projects.Generic MQ2 Gas Sensor is a type of sensor module. It is basically an electrochemical gas sensor that consists of a field effect transistor (FET) that has been modified by coating it with a specific chemical substance known as a sensing layer. This layer is capable of detecting the presence and concentration of certain gases by changing its electrical resistance in response to the concentration of these gases.The Generic MQ2 Gas Sensor is a sensor that can detect concentrations of volatile organic compounds (VOCs) in the air. Its electronics are enclosed in a durable aluminum housing, and an electrochemical sensor is housed inside. The sensor is designed to be easy to use with a simple serial interface, and it features an LED status indicator on top of its housing to communicate warnings and errors.

Generic MQ303A Semiconductor Type Alcohol Sensor

Ships within 5 days

Generic MQ303A Semiconductor Type Alcohol Sensor

By GENERIC

₹388

These days, a lot of people are using alcohol sensors to make sure that they can keep track of how much alcohol they drink or to see if a driver is under the influence of alcohol. A lot of these sensors come with an LCD screen that can be used to display the level of alcohol in your blood. It's important to note that if you're seeing colorful lines on the screen, you'll need to recalibrate it before you use it for its intended purposes.The Generic MQ303A Alcohol Sensor is a compact, easy to use device that allows you to quickly and easily measure alcohol levels in the air or on an object. It can also be used to measure the alcohol concentration of a liquid.To start using this device, you will need some sort of microcontroller with analog-to-digital conversion capability, like the Arduino Uno. This offers an easy way to integrate this alcohol sensor with your project. You will also need two 1.5 V batteries and some wire to connect the two terminals of the sensor to your Arduino Uno.The Generic MQ303A Alcohol Sensor uses Electrochemical Oxidation Method (ECO) to detect alcohol vapor level in the air and output a voltage value based on that level. When no alcohol is detected, the output voltage of the device is ~0 V. When there is around 10 ppm of alcohol in the air, it produces ~1 V out, and when there are 100 ppm of alcohol in the air, it makes ~2 V out.

OKOS Smart PIR Motion Sensors: WiFi Motion Detector , Works on 2xAAA Batteries

Ships within 30 days

OKOS Smart PIR Motion Sensors: WiFi Motion Detector , Works on 2xAAA Batteries

By OKOS

₹1,769

OKOS Smart PIR Motion Sensors. These advanced motion detectors utilize WiFi connectivity and operate on 2xAAA batteries, with the added convenience of USB charge support. Compatible with Alexa and Google Home, these motion sensors seamlessly integrate into your smart home ecosystem, providing reliable detection and automation for a more connected and efficient living experience. The OKOS Smart PIR Motion Sensors are designed to detect motion in your home and trigger actions based on movement. Whether you want to automate your lighting, activate security cameras, or receive notifications when someone enters a room, these motion sensors provide a reliable and responsive solution. With their WiFi connectivity, they offer instant detection and real-time alerts, keeping you informed and in control of your home's security. Powered by 2xAAA batteries, the OKOS Smart PIR Motion Sensors provide long-lasting operation without the need for frequent battery changes. However, for added convenience, these motion sensors also support USB charging, allowing you to easily recharge the batteries when needed. This ensures continuous operation and eliminates the hassle of constantly replacing batteries, saving you time and money in the long run. The compatibility of the OKOS Smart PIR Motion Sensors with popular voice assistants like Alexa and Google Home adds a new level of convenience and automation to your smart home. With voice commands, you can easily control and manage the motion sensors, as well as integrate them with other smart devices in your home. Activate your security system, adjust the lighting, or create custom routines that respond to specific motion triggers. The possibilities are endless, and the control is in your hands. The setup and installation of the OKOS Smart PIR Motion Sensors are quick and straightforward. With their WiFi connectivity, you can easily connect the sensors to your home network and configure them through the accompanying mobile app. The app provides a user-friendly interface for customizing detection settings, creating automation rules, and receiving real-time notifications. Whether you're at home or away, you can have peace of mind knowing that your smart home is actively monitoring for any motion.

OKOS WiFi Gas Leak Sensor Smart Home Safety Smoke Fire Methane Leak Detector

Ships within 30 days

OKOS WiFi Gas Leak Sensor Smart Home Safety Smoke Fire Methane Leak Detector

By OKOS

₹3,657

OKOS WiFi Gas Leak Sensor Smart Home Safety Smoke Fire Methane Leak Detector. This intelligent device is designed to provide early detection of gas leaks, smoke, and fire hazards, ensuring the safety and well-being of your household. With its inbuilt display and WiFi connectivity, it offers real-time monitoring and instant alerts, giving you peace of mind. The OKOS WiFi Gas Leak Sensor is a versatile and reliable safety device that detects the presence of dangerous gases such as methane, commonly found in natural gas. It also detects smoke and potential fire hazards, allowing for comprehensive monitoring of your home's safety. By promptly detecting these hazards, the sensor enables quick action, reducing the risk of accidents and potential damage to your property. Featuring an inbuilt display, the OKOS WiFi Gas Leak Sensor provides clear and real-time information about the detected gas levels, smoke, and fire status. The display allows for easy monitoring and instant awareness of any potential dangers. You can conveniently check the status of your home's safety without relying solely on notifications from your smartphone or other devices. The WiFi connectivity of the OKOS Gas Leak Sensor ensures that you stay connected and informed at all times. When connected to your home's WiFi network, the sensor can send instant alerts and notifications to your smartphone or other connected devices in case of any gas leaks, smoke, or fire hazards. This allows for quick response and appropriate action, whether you're at home or away. The OKOS WiFi Gas Leak Sensor is designed to be reliable and user-friendly. It is easy to install and requires connection with a power adapter for continuous operation. Once installed, it provides continuous monitoring, ensuring round-the-clock protection. The sensor is equipped with advanced technology and sensors that can detect even small traces of gas or smoke, providing an added layer of safety for your home. With the OKOS Smart app, you can have complete control over the OKOS WiFi Gas Leak Sensor. The app allows you to customize settings, set up alerts, and view historical data for monitoring and analysis. You can also integrate the sensor with other smart home devices and automation systems to create a comprehensive safety network tailored to your needs.

OKOS WiFi Gas Detector Security Alarm White, Black for Home and Office

Ships within 30 days

OKOS WiFi Gas Detector Security Alarm White, Black for Home and Office

By OKOS

₹4,483

OKOS WiFi Gas Detector Security Alarm in a sleek white or black design is an essential safety device for both home and office environments. This intelligent alarm system provides reliable detection and real-time alerts for potential gas leaks, ensuring the safety of you and your loved ones. With the OKOS WiFi Gas Detector Security Alarm, you can rest easy knowing that it continuously monitors the air for the presence of harmful gases such as natural gas or carbon monoxide. Upon detecting a gas leak, the alarm will sound a loud siren to alert occupants and trigger real-time notifications to your smartphone via WiFi connectivity. This allows for immediate action to be taken, preventing potential accidents or health hazards. The WiFi connectivity of the OKOS Gas Detector Security Alarm enables remote monitoring and control through a dedicated mobile app. You can check the status of the alarm, monitor gas levels, and receive alerts even when you're away from home or office. This provides peace of mind and allows for quick response and necessary precautions to be taken, no matter where you are. Installation of the OKOS WiFi Gas Detector Security Alarm is simple and straightforward. It can be easily mounted on a wall or placed on a tabletop, ensuring optimal coverage of the area. The sleek design blends seamlessly with your decor, without compromising on functionality. The OKOS WiFi Gas Detector Security Alarm also offers additional features such as battery backup, ensuring uninterrupted protection even during power outages, and a built-in sensor to monitor the device's operating condition, providing a reliable and accurate gas detection performance. The OKOS WiFi Gas Detector Security Alarm is a crucial component of any comprehensive home or office safety system. Upgrade your space with this intelligent alarm system and enjoy the peace of mind that comes with reliable gas leak detection and timely alerts. Protect your loved ones and valuable assets with the OKOS WiFi Gas Detector Security Alarm, and prioritize safety in your home or office environment.

OKOS Smart Switch Dimmer White for Home and Office

Ships within 30 days

OKOS Smart Switch Dimmer White for Home and Office

By OKOS

₹3,185

OKOS Smart Switch Dimmer in an elegant white design, designed to enhance your home and office lighting experience. This innovative device combines smart technology with user-friendly controls, providing you with ultimate convenience and customization. With the OKOS Smart Switch Dimmer, you have complete control over the brightness of your lights. Adjust the intensity to create the perfect ambiance for any occasion, whether it's a cozy evening at home or a productive work environment in the office. Dim or brighten your lights effortlessly with just a touch. Designed for seamless integration, this smart switch dimmer is compatible with popular voice assistants such as Amazon Alexa and Google Assistant. Simply use your voice commands to turn your lights on or off, adjust the brightness, or even set specific lighting scenes. Experience the future of lighting control at your fingertips. The OKOS Smart Switch Dimmer offers enhanced scheduling options, allowing you to automate your lighting based on your daily routines. Set timers to turn lights on or off at specific times, making it appear as if you're home even when you're away. Save energy by ensuring lights are only on when needed, reducing electricity costs. Installation is a breeze with the OKOS Smart Switch Dimmer. It fits seamlessly into standard electrical wall boxes, replacing your existing switches without any additional wiring required. Enjoy a hassle-free upgrade to smart lighting technology and transform your space instantly. The OKOS Smart Switch Dimmer in white is a stylish and functional addition to any home or office. Embrace the convenience of smart lighting control, elevate your ambiance, and optimize energy consumption. Experience the future of lighting with the OKOS Smart Switch Dimmer and enjoy a smarter, more comfortable environment.

OKOS Smart Smoke Sensor WiFi White for Home and Office

Ships within 30 days

OKOS Smart Smoke Sensor WiFi White for Home and Office

By OKOS

₹3,185

OKOS Smart Smoke Sensor in crisp white is a crucial device for ensuring the safety of your home or office. This smart sensor is designed to detect smoke and alert you immediately, providing you with early warning in the event of a fire. With its WiFi connectivity, the OKOS Smart Smoke Sensor offers real-time notifications and remote monitoring capabilities. When smoke is detected, it sends instant alerts to your smartphone, allowing you to take prompt action even when you're away. This feature is particularly valuable for protecting your property and loved ones, giving you peace of mind no matter where you are. The installation of the OKOS Smart Smoke Sensor is quick and easy. It can be mounted on the ceiling or wall, and the included mounting bracket ensures a secure fit. The sensor is powered by long-lasting batteries, eliminating the need for complicated wiring or access to electricity. This smart sensor goes beyond basic smoke detection. It also features advanced functionality such as self-testing and monitoring. The OKOS Smart Smoke Sensor regularly checks its own status and battery life, providing you with reliable and accurate performance at all times. Additionally, it has a built-in sounder to provide audible alerts in case of emergency. Integration with other smart home devices is seamless with the OKOS Smart Smoke Sensor. It can be connected to your existing smart home ecosystem, allowing for automated actions when smoke is detected. For example, it can trigger the activation of smart lights or the unlocking of doors to facilitate a safe exit. Ensure the safety of your home or office with the OKOS Smart Smoke Sensor. Experience the convenience, reliability, and peace of mind that this intelligent device brings to your space. Don't compromise on safety - invest in the OKOS Smart Smoke Sensor for comprehensive fire detection and protection.

OKOS Wi-Fi Touch Switch Black for Home and Office

Ships within 30 days

OKOS Wi-Fi Touch Switch Black for Home and Office

By OKOS

₹3,185

OKOS Wi-Fi Touch Switch in sleek black, the ultimate smart solution for both home and office environments. This innovative switch combines modern design with cutting-edge technology to enhance your space and simplify your daily routines.
With its Wi-Fi connectivity, the OKOS Touch Switch allows you to control your lights and devices effortlessly from anywhere using your smartphone or voice commands. Whether you're at home or away, you can easily turn lights on or off, adjust brightness levels, and create customized schedules to suit your needs. Imagine arriving home to a welcoming, well-lit environment or ensuring your office lights are turned off after hours with just a few taps on your phone.
The touch-sensitive panel adds a touch of elegance to any room, providing a seamless and intuitive user experience. With a gentle tap, you can activate or deactivate connected devices, making it a breeze to control your lighting, fans, or other appliances. The sleek black finish enhances the aesthetics of any space, blending seamlessly with your existing decor.
Installation is quick and straightforward, requiring minimal wiring and no additional hubs or complicated setups. The OKOS Touch Switch fits seamlessly into standard wall switch boxes, making it an ideal choice for both new construction and retrofit projects.
In addition to its smart features, the OKOS Touch Switch also offers energy-saving capabilities. By intelligently managing your lighting and devices, you can reduce energy consumption and lower your utility bills.

OKOS Smart Wi-Fi Smoke Detector White for Home and Office

Ships within 30 days

OKOS Smart Wi-Fi Smoke Detector White for Home and Office

By OKOS

₹3,657

OKOS Smart Wi-Fi Smoke Detector in White is a crucial safety device for your home and office. This smart smoke detector is designed to detect the presence of smoke and alert you immediately, providing early warning in the event of a fire. With its smart features and Wi-Fi connectivity, this smoke detector offers convenience, reliability, and enhanced safety. The white color of the OKOS Smart Wi-Fi Smoke Detector blends seamlessly with any interior decor. Its clean and neutral appearance ensures that it does not stand out, maintaining the overall aesthetic of your space while providing essential protection. This smoke detector connects to your Wi-Fi network, allowing you to receive real-time alerts and notifications directly on your smartphone. In the event of a smoke detection, you will be instantly notified, enabling you to take immediate action to ensure the safety of yourself, your family, or your colleagues. Installation of the OKOS Smart Wi-Fi Smoke Detector is simple and hassle-free. It can be easily mounted on the ceiling or wall using screws or adhesive tape, providing a secure and stable connection. The smoke detector is battery-operated, ensuring continuous operation even during power outages. The OKOS Smart Wi-Fi Smoke Detector is equipped with advanced sensors that can quickly and accurately detect the presence of smoke. When smoke is detected, the detector emits a loud and distinctive alarm, alerting everyone in the vicinity to evacuate the premises immediately. With its smart capabilities, the OKOS Smart Wi-Fi Smoke Detector offers additional convenience and functionality. It can be integrated with other smart home devices and voice assistants, allowing for a synchronized and interconnected safety system. You can also control the smoke detector remotely through a dedicated smartphone app, enabling you to check its status or silence false alarms from anywhere. The OKOS Smart Wi-Fi Smoke Detector undergoes rigorous testing to ensure reliable and accurate performance. It meets the highest safety standards and is designed to provide early warning and maximum protection in the event of a fire.

Schneider 34036 Electric External Sensor For Neutral Or Earth Flt

Ships within 60 days

Schneider 34036 Electric External Sensor For Neutral Or Earth Flt

By Schneider Electric

₹70,799

External sensor (NCT) for neutral of 3 Phase-4 Wire systems. EasyPact MVS is compliant with international standards (IEC 60947, CE, EAC and RoHS). The dimension is 127mm x 295mm x 102mm (H x W x D).

KUSAM-MECO Portable Gas Detector for Combustable 0-100% - KM 840-LEL

Ships within 24 hrs

KUSAM-MECO Portable Gas Detector KM Series

By KUSAM-MECO

₹14,159 - ₹24,779

The KUSAM-MECO Portable Gas Detector KM Series is an advanced and reliable solution for detecting and monitoring various gases in industrial, commercial, and environmental settings. Designed to provide accurate and real-time gas detection, this series of portable detectors offers essential safety features and functionality for a wide range of applications.One of the key features of the KM Series gas detectors is their ability to detect multiple types of gases, including combustible gases, toxic gases, and oxygen levels. This versatility makes them suitable for use in industries such as oil and gas, chemical plants, manufacturing facilities, wastewater treatment plants, and confined space entry operations.Equipped with high-sensitivity sensors and advanced detection technology, the KM Series detectors can quickly and accurately identify gas leaks or presence, allowing users to take immediate action to mitigate risks and ensure safety. The detectors provide visual and audible alarms to alert users to the presence of hazardous gases, helping to prevent accidents and potential harm to personnel and property.The KM Series gas detectors are designed for ease of use and portability, featuring compact and lightweight designs that make them convenient for field use and on-site inspections. They are equipped with intuitive interfaces, easy-to-read displays, and user-friendly controls, allowing operators to navigate settings, view gas levels, and monitor alarm status with ease.Furthermore, the KM Series gas detectors are built to withstand harsh environmental conditions and rugged use, with durable housing and reliable components that ensure long-term performance and durability. They may also include features such as data logging capabilities, adjustable alarm thresholds, and rechargeable batteries for added convenience and functionality.Overall, the KUSAM-MECO Portable Gas Detector KM Series provides essential gas detection capabilities in a portable and user-friendly package. Whether used for routine safety checks, leak detection, or emergency response, these detectors offer peace of mind and reliable performance for professionals working in gas-related industries and applications.

Sensor Type : Electrochemical sensor

Operating Humidity : 0-95%RH (non-condensing)

Display Information : Gas types, Concentration value, Concentration unit, Time, Battery status, Alarm status, etc.

Power Supply : 3.7V, 1800mAh rechargeable lithium battery

IP Rating : IP65

Display : Large Screen LCD

Operating Temperature : -20°C～50°C

Type of Product : Portable Gas Detector

Body Material : ABS and PC

B K JAGAN & CO Brass Valve Chutki Gas Industry 1-4 inch 8 mm

Ships within 4 days

B K JAGAN & CO Brass Valve Chutki Gas Industry

By B K JAGAN & CO

₹754 - ₹860

You save ₹245!

24.56% OFF

The B K Jagan & Co Brass Valve Chutki is a high-quality, reliable valve designed for use in the gas industry. Crafted from durable brass, this valve is built to withstand high pressure and provide excellent resistance to corrosion, making it ideal for gas distribution systems and other industrial applications. The Chutki valve features a compact, easy-to-operate design, ensuring efficient control of gas flow. Its precision engineering allows for smooth and secure operation, preventing leaks and ensuring safety in gas pipelines, cylinders, and other gas-related equipment. The brass construction offers both strength and longevity, making it a durable solution for long-term use in harsh conditions. Perfect for use in industrial, commercial, and residential gas systems, the B K Jagan & Co Brass Valve Chutki ensures reliable performance, safety, and durability, making it an essential component in gas-related installations and maintenance.

Type of Product : Brass Valve Chutki

End Connection Type : Male

Material : Brass

Color : Golden

Height : 5 cm

AKARI Brass Gas Valve 6.35 mm (1/4 inch)

Ships within 4 days

Akari Brass Gas Valve (Size 1/4 to 3/4)

By AKARI

₹341 - ₹365

You save ₹107!

22.67% OFF

The Akari Brass Gas Valve is a specialized component designed for controlling the flow of gas in various applications. Crafted from high-quality brass, this valve offers durability, corrosion resistance, and suitability for gas handling. Key features of the Akari Brass Gas Valve may include: 1. **Gas Compatibility:** Designed specifically for use with gas, this valve is compatible with various types of gases commonly used in residential, commercial, and industrial settings. 2. **Reliable Shut-Off:** The valve provides a reliable shut-off mechanism to control the flow of gas, ensuring safety and preventing leaks. 3. **Durable Construction:** Constructed from brass, a robust and corrosion-resistant material, the valve offers long-lasting performance and reliability even in harsh environments. 4. **Ease of Operation:** The valve may feature a simple lever or handle for easy manual operation, allowing users to adjust the flow of gas as needed. 5. **Wide Range of Applications:** The Akari Brass Gas Valve is suitable for a wide range of applications, including gas appliances, heating systems, gas pipelines, and more. Overall, the Akari Brass Gas Valve provides a reliable and efficient solution for controlling the flow of gas in various residential, commercial, and industrial applications, ensuring safety and optimal performance.

Type of Product : Gas Valve

Return Policy : Non Returnable

Usage/Application : Industrial

Media : Water

Finish Type : Polished

Material : Brass

B K JAGAN & CO Brass Valve Threaded Gas Industry 1-4 inch, Size 7x3x7 cm

Ships within 4 days

B K JAGAN & CO Brass Valve Threaded Gas Industry

By B K JAGAN & CO

₹683 - ₹801

The B K Jagan & Co Brass Valve Threaded is a high-performance valve designed for use in the gas industry. Made from premium-grade brass, it offers superior durability, corrosion resistance, and reliability, making it ideal for gas distribution systems, pipeline installations, and gas-powered equipment. The threaded design ensures a secure, leak-proof connection, making it suitable for both high and low-pressure gas applications. Its smooth operation allows for precise control over gas flow, ensuring safety and efficiency in industrial, commercial, and residential gas systems. The robust brass construction enhances longevity and ensures the valve will withstand the rigors of long-term use in demanding environments. Perfect for various gas-related applications, the B K Jagan & Co Brass Valve Threaded is an essential component for reliable and safe gas management. Its durability, ease of use, and excellent sealing capabilities make it a trusted solution for professionals in the gas industry.

Type of Product : Brass Valve Threaded

End Connection Type : Female

Material : Brass

Color : White

HTC GD-03 0.0% - 99.9 % RH GAS LEAK DETECTOR

Ships within 24 hrs

HTC GD-03 0.0% - 99.9 % RH GAS LEAK DETECTOR

By HTC

₹2,005

HTC GD-03 0.0% - 99.9 % RH GAS LEAK DETECTOR is based on Hot Wire Ionization (HWI) principle of sensing gases by means of an electrically heated filament which ionizes the gas molecules in contact with it into ions and electrons which are detected by a sensitive electronic ionization detector. The output signal from the sensor is an electric current (approx 250A) proportional to concentration of detected gas within range of 0 ppm to 10 % Volume (v/v) in air at room temperature (approx 25C). It can detect a variety of natural and man-made gases, including propane, methane, carbon monoxide, butane and more. The device relies on a chemical reaction between the gas and an internal substance to alert the user that gas is present. It offers users a wide measurement range, fast response time, and an audible alarm that can be silenced. The device is ideal for detecting low concentrations of combustible gases such as methane, propane, butane, and natural gas; toxic gases such as carbon monoxide; and corrosive gases such as hydrochloric acid. This handheld device is easy to use because it\\'s designed to detect the presence or concentration of gases quickly with a quick response time. Its display also shows users both the level of concentration and the type of gas detected. Its audible alarm makes it easy for users to detect gas leaks even when they\\'re not looking at the device. They can simply listen for the alarm instead of having to keep checking the readout on the screen.

G-Tech GT-6000 <+-5% FS PORTABLE MULTI-GAS DETECTOR

Ships within 24 hrs

G-Tech GT-6000 <+-5% FS PORTABLE MULTI-GAS DETECTOR

By G-Tech

₹22,419 ~~₹22,715~~

You save ₹296!

1.3% OFF

G-Tech GT-6000 +/-5% FS Portable Multi-Gas Detectors are continuous gas monitors with a wide range of applications. They are extremely portable and require virtually no maintenance. The units are available in several models to meet your specific needs: stationary and mobile applications, long term pipeline operation, digital display or analog output indicators, remote probe options and wireless communication module. It is a multi-gas detector that also detects percent concentration of surrounding air (FS). With its fast response, it has been specially designed for professional users in industries such as chemical, pharmaceutical and food production, steel mills and natural gas supply companies. It is a portable multi-gas detector that provides real-time detection and verification of hazardous gases at ranges from 0 ppm through to 10,000 ppm by means of an integrated microprocessor. The GT-6000 was specifically designed for safety professionals such as electricians, contractors or surveyors who need the ability to monitor for the presence of combustible materials or other hazards in areas where it is difficult or unsafe. Its easy-to-use interface makes it ideal for detecting toxic, combustible and oxygen deficient gases in a variety of environments—from high-temperature ovens to confined spaces. Designed with an intuitive LCD display, this unit provides visual indication of detector status and alarm icons that tell you how severe the hazard is.

Motherson Left/Right Side Dicky Boot Shocker for Maruti Suzuki Alto 800 GS-MS018RC

Ships within 24 hrs

Motherson Left/Right Side Dicky Boot Shocker for Maruti Suzuki Alto 800 GS-MS018RC

By Motherson

₹387

Features:- Simple to install – no special tools necessary Nitro-carburized rod withstands rust Piston assembly equipped with anti-leak protection for optimal lift Heavy-duty plastic rod guide prevents wear and tear Limiting groove and stop collar precision-engineered for perfect extended length Tight seal secures pressurized gas Extra-strength steel body pressure cylinder

Motherson Left/Right Side Dicky Boot Shocker for Ford Figo GS-FO037RC

Ships within 24 hrs

Motherson Left/Right Side Dicky Boot Shocker for Ford Figo GS-FO037RC

By Motherson

₹387

Features:- Best quality and heavy duty Speed and unique damping properties High performance Standard size

Motherson Left/Right Side Dicky Boot Shocker for Renault Duster GS-RN061RC

Flash Deal

Ships within 24 hrs

Motherson Left/Right Side Dicky Boot Shocker for Renault Duster GS-RN061RC

By Motherson

₹240 ~~₹341~~

You save ₹101!

29.67% OFF

Ships within 24 hrs

G-Tech Gas Detectors Black and Red

By G-Tech

₹9,203 - ₹11,327

The G-Tech Gas Detectors in Black and Red are portable safety instruments designed to detect the presence of combustible and toxic gases in industrial and commercial environments. These detectors provide precise gas concentration readings, helping to ensure safe working conditions in confined spaces, laboratories, and production areas. Suitable for various gas detection applications, they assist in identifying potential leaks and maintaining air quality standards. Featuring a digital display and sturdy construction, the G-Tech Gas Detectors offer clear visibility of readings and reliable performance under demanding conditions. Their ergonomic design allows comfortable handling, while the durable housing enhances protection during field use. Compact, efficient, and easy to operate, these detectors serve as essential tools for continuous gas monitoring and workplace safety management.

Country of Origin : India

Application : Industrial

Weight : 111.9 g

Color : Black&Red

Dimension : 67.98x28.47x119.98mm

Name of Manufacturer/Packer/Importer : ASHUTOSH ENTERPRISES

Motherson Left/Right Side Dicky Boot Shocker for Nissan,Renault Micra,Pulse GS-NS083RC

Ships within 24 hrs

Motherson Left/Right Side Dicky Boot Shocker for Nissan,Renault Micra,Pulse GS-NS083RC

By Motherson

₹429

Page 1 of 1495 results