• Home /
• Hydraulics and Pneumatics /
• servo pride 40

Have a question? Call us now at +91 9650660070

servo pride 40

Showing 40 out of 79385 products

Sort by

Recommended New Price : Low to High Price : High to Low

Ships within 5 days

Servo SYSTEM 32 Circulating Oil (210 L)

By Servo

Can of 210 litre

₹58,999  

Servosystem oils are anti-wear hydraulic and circulation oils specially formulated for efficient lubrication of a wide variety of industrial equipment. Servosystem oils are blended from highly refined base stocks and carefully selected antioxidant, anti-wear, anti-rust and anti-foam additives.
Performance Benefits :-
Provide good wear- protection, thereby prolonging service life of moving parts
Possess high film strength properties which help minimise friction and wear
Provide rust-protection, to reduce the incidence of corrosion
Have excellent resistance to oxidation thereby giving long service life
Have reduced tendency to foam thereby minimise the chance of noisy operation and erratic actuator response
Applicaion :-
Servosystem oils are recommended as fluid media for hydraulic systems and hydraulic pumps even under severe operating conditions in stationary and mobile equipment.
These oils are also recommended for circulation, splash, bath and ring oiling systems of the bearings (both plain and anti-friction) and gears of industrial machinery that require a ong life lubricant.
These oils can be used for chain drives and compressor crankcase lubrication.
Note: No door step delivery is avaiable on this product. Customer have to pick the barrel from his nearest transport office depending upon the pincode provided.

Add to Cart Buy Now

Ships within 5 days

Servo Hydraulic Brake Fluid Super Hd (0.25 Ltr)

By Servo

Can of 250 ml

₹164  

This item is non-returnable.
Servo Brake Fluid Super HD is heavy duty hydraulic brake fluid which ensures long service life of the brake fluid and components of brake mechanism. It remains clear and uniform fluid under extreme cold climatic conditions, enabling satisfactory operation of brake systems. It is fully compatible with rubber seals used in Hydraulic Brake Systems. It also lubricates the moving parts of the brake system very effectively.
PERFORMANCE STANDARDS:
Servo Brake Fluid Super HD meets the following specification:
SAE J 1703
FMVSS 116 DOT 3
IS:8654-1986 (reaffirmed 1991)
MANUFACTURERS APPROVAL:
Servo Brake Fluid Super HD is approved by TELCO, Maruti, Daewoo Motors, etc.
Specifications:
Appearance: Clear Homogeneous Red Liquid
Equilibrium Reflex Boiling Point, °C Min: 205
pH Value: 7.0-11.5

Add to Cart Buy Now

Ships within 5 days

Servo Hydraulic Brake Fluid Super Hd (0.5 Ltr)

By Servo

Can of 500 ml

₹247  

This item is non-returnable.
Servo Brake Fluid Super HD is heavy duty hydraulic brake fluid which ensures long service life of the brake fluid and components of brake mechanism. It remains clear and uniform fluid under extreme cold climatic conditions, enabling satisfactory operation of brake systems. It is fully compatible with rubber seals used in Hydraulic Brake Systems. It also lubricates the moving parts of the brake system very effectively.
PERFORMANCE STANDARDS:
Servo Brake Fluid Super HD meets the following specification:
SAE J 1703
FMVSS 116 DOT 3
IS:8654-1986 (reaffirmed 1991)
MANUFACTURERS APPROVAL:
Servo Brake Fluid Super HD is approved by TELCO, Maruti, Daewoo Motors, etc.
Specifications:
Appearance: Clear Homogeneous Red Liquid
Equilibrium Reflex Boiling Point, °C Min: 205
pH Value: 7.0-11.5

Add to Cart Buy Now

Ships within 3 days

Servo Super MG 20W-40 Multigrade Oil (210 L)

By Servo

Can of 210 litre

₹88,499  

Servo Super Multigrade Oils are blended from highly refined base stocks and balanced additive package containing shear stable VI improver, metallic detergent dispersant and anti-oxidant. These oils are formulated to meet lubrication requirements of both gasoline and diesel engines. Servo Super Multigrade Oils are red in colour and suitable for all seasons.
Performance Benefits :-
Enable easy low temperature starting
Minimise fuel and oil consumption
Give longer battery life
Provide maximum protection to engine parts against rust and corrosion
Give good high and low temperature performance in the engine
Minimise wear of engine parts
Ensure system cleanliness by holding contaminants in finely dispersed state
Applicaion :-
Modern passenger cars
Naturally aspirated diesel engines operating under severe conditions.
Supercharged diesel engines
Vehicles encountering continuous start-stop operation.
Note: No door step delivery is avaiable on this product. Customer have to pick the barrel from his nearest transport office depending upon the pincode provided.

Add to Cart Buy Now

Related Searches

panasonic cables

analog devices integrated circuits

mitsuboshi pulleys

koganei pneumatic cylinders

sanyo denki servo motors

Ships within 3 days

Servo SYSTEM 68 Hydraulic Oil (210 L)

By Servo

Can of 210.00 litre

₹55,459  

Servosystem oils are premium quality anti- wear type lubricants formulated with superior quality of hydro treated base stock. They provide long service life and are recommended for hydraulic and circulation systems of wide variety of equipments. These oils are also used for compressor crankcase lubrication, but are not recommended for lubrication of turbines and equipments having silver-coated components.
Note: No door step delivery is avaiable on this product. Customer have to pick the barrel from his nearest transport office depending upon the pincode provided.

Add to Cart Buy Now

Ships within 8 days

Servo 4T 20W-40 Engine Oil 900 ml Capacity (Pack of 20)

By Servo

Pack of 20 piece

₹7,669  

Servo 4T Green 20W-40 Engine Oil 900 ml Capacity is designed for four-stroke motorcycles and provides dependable lubrication for regular riding conditions. Its 20W-40 viscosity grade helps maintain proper oil flow and lubrication across essential engine components, supporting smooth and consistent operation. The formulation helps reduce friction and wear caused by continuous movement, contributing to improved engine protection during everyday use. The convenient 900 ml pack is suitable for routine oil changes and regular maintenance requirements. It is an ideal choice for compatible motorcycles used for daily commuting, helping maintain efficient engine functioning and reliable performance over regular service intervals. Servo 4T Green 20W-40 Engine Oil 900 ml Capacity supports effective lubrication of vital engine parts and helps promote smoother motorcycle performance. Its balanced viscosity assists in maintaining a protective oil layer under varying operating conditions, helping reduce component wear and friction. Suitable for scheduled servicing, the oil can be used according to the motorcycle manufacturer's recommendations for compatible four-stroke engines. The compact pack allows convenient handling and application during maintenance. Designed to support regular engine care, this motorcycle engine oil helps maintain smooth operation, dependable lubrication and consistent performance for everyday commuting and routine riding applications.

Add to Cart Buy Now

Ships within 8 days

Servo 4T 20W-40 Engine Oil 1 L Capacity (Pack of 20)

By Servo

Pack of 20 piece

₹8,377  

Servo 4T 20W-40 Engine Oil 1 L Capacity is formulated for four-stroke motorcycles requiring dependable lubrication and smooth engine performance. Its 20W-40 viscosity grade helps provide effective lubrication across varying operating conditions while supporting proper engine protection during regular riding. The oil is suitable for helping reduce friction between moving engine components, promoting smoother operation and maintaining consistent performance. The convenient 1 L pack size makes it suitable for routine engine oil replacement and maintenance. Designed for everyday motorcycle applications, this engine oil supports efficient lubrication and helps maintain reliable engine functioning over regular service intervals. Servo 4T 20W-40 Engine Oil 1 L Capacity is a practical choice for motorcycle owners seeking an appropriate lubricant for regular maintenance requirements. The formulation helps protect vital engine parts against wear caused by continuous movement and operating temperatures. Its balanced viscosity supports oil flow and lubrication, contributing to smooth engine operation and dependable riding performance. Suitable for use during scheduled oil changes, this 1 litre engine oil pack offers convenient handling and application for compatible four-stroke motorcycles. Regular use according to the vehicle manufacturer's recommendations can help maintain proper lubrication and support consistent engine performance.

Add to Cart Buy Now

Ships within 10 days

Servo SYSTEM 46 Hydraulic Oil Viscosity 210 L for Commercial Vehicles

By Servo

Barrel of 210 litre

₹49,559  

The Servo SYSTEM 46 Hydraulic Oil 46 mm²/s Viscosity 210 L for Commercial Vehicles by Soudal is a trusted solution for a wide range of applications in construction, automotive, and DIY projects. Engineered for durability and ease of use, this product delivers reliable performance under various environmental conditions. Whether sealing, bonding, or coating, it provides a strong, long-lasting finish that professionals and homeowners can rely on.With its user-friendly application and fast curing time, the Servo SYSTEM 46 Hydraulic Oil 46 mm²/s Viscosity 210 L for Commercial Vehicles is ideal for demanding tasks requiring strength and precision. Choose Soudal for premium-quality adhesives, sealants, and sprays that combine technical innovation with consistent results across multiple surfaces.

Add to Cart Buy Now

Ships within 46 days

Panasonic LIQI Series Servo Drive 3000 rpm

By Panasonic

₹34,219 - ₹44,839

Introducing the Panasonic LIQI Series Servo Drive with a speed of 3000 RPM, a cutting-edge solution designed to optimize performance and precision in industrial automation. Engineered by Panasonic, this servo drive offers exceptional speed, accuracy, and reliability to meet the demands of modern manufacturing processes. The Panasonic LIQI Series Servo Drive is specifically engineered to deliver rapid rotation speeds of up to 3000 revolutions per minute (RPM), making it ideal for applications requiring fast and precise motion control. Whether utilized in robotics, CNC machining, or packaging equipment, this servo drive provides the speed and precision necessary for efficient operation. Equipped with advanced servo technology, the LIQI Series Servo Drive ensures precise control over speed, torque, and position. This enables smooth and accurate motion, enhancing productivity and quality in industrial processes. Constructed with durability in mind, the Panasonic LIQI Series Servo Motor Drive is built using high-quality materials and undergoes rigorous testing to ensure long-term reliability in demanding industrial environments. Its robust design ensures consistent performance, minimizing downtime and maximizing productivity. Whether you're upgrading existing machinery or designing new automation systems, the Panasonic LIQI Series Servo Motor Drive with 3000 RPM speed offers a dependable and advanced solution. With its high-speed capabilities, precise control, and durable construction, this servo motor drive drives efficiency and success in industrial automation applications.

Series : LIQI Series

Type : Servo Drive

Input Power Supply : Single Phase / 3 Phase 200 V

Explore other Variants (2)

Ships within 24 hrs

Schneider Electric Emergency switching off push button Turn To Release Red mushroom Ø 40 mm, XB5AS542N

By Schneider Electric

₹353   ₹425

You save ₹72!

16.94% OFF

Schneider Electric mushroom latching 2-way door and window locks provides quick access by turning to release the lock. This means that neither a key nor a combination are needed, so you can unlock the door or window quickly when necessary. These locks are ideal for checkout counters, hotel rooms or laboratories where you want to be able to unlock the door with one hand while holding an object in the other.

Add to Cart Buy Now

Ships within 4 days

DELTA Servo Motor B2/Without Brake ECMA-E21/F21

By DELTA

₹83,779 - ₹83,779

The DELTA B2 Servo Motor, rated at 3000W and without a brake, is a powerful and efficient component designed for industrial automation applications. Developed as part of the ECMA series by Delta Electronics, a leading provider of power and thermal management solutions, this servo motor integrates advanced technology to deliver superior performance and reliability. With its impressive power rating of 3000W, the DELTA B2 Servo Motor offers high torque and speed capabilities, making it well-suited for a wide range of motion control tasks across diverse industries. Whether it's precision positioning in CNC machining, dynamic motion in robotics, or material handling applications, this servo motor provides the necessary power and precision to optimize automation processes. One of the notable features of the DELTA B2 Servo Motor is its efficient design without a brake mechanism. This design choice ensures precise control and rapid responsiveness, enhancing operational efficiency while maintaining high levels of safety. By eliminating the need for a brake, installation and system complexity are reduced, simplifying integration into existing setups. Furthermore, the DELTA B2 Servo Motor is engineered to withstand the demanding conditions of industrial environments. Its robust construction and durable components ensure reliable performance over extended periods, minimizing downtime and maintenance costs for manufacturers. In terms of integration, the DELTA B2 Servo Motor supports various communication protocols, facilitating seamless connectivity with different control systems. This versatility enables easy integration into existing automation setups, further enhancing its usability. Overall, the DELTA B2 Servo Motor rated at 3000W without a brake represents a pinnacle of engineering excellence and practical innovation. With its exceptional performance, reliability, and precision, it empowers businesses to optimize their automation processes, improve productivity, and maintain competitiveness in today's industrial landscape.

Type of Product : Brake Servo Motor

Power : 3000 W

Operating Temperature : 0°C - 40°C

Encoder Type : Incremental

Motor Frame : 130 mm

Mounting Type : Flange Mount

Explore other Variants (1)

Ships within 2 days

Panasonic 3000 RPM LIQI Series Servo Motor

By Panasonic

₹30,679 - ₹36,579

Introducing the Panasonic LIQI Series Servo Motor Drive with a speed of 3000 RPM, a cutting-edge solution designed to optimize performance and precision in industrial automation. Engineered by Panasonic, this servo motor drive offers exceptional speed, accuracy, and reliability to meet the demands of modern manufacturing processes. The Panasonic LIQI Series Servo Motor Drive is specifically engineered to deliver rapid rotation speeds of up to 3000 revolutions per minute (RPM), making it ideal for applications requiring fast and precise motion control. Whether utilized in robotics, CNC machining, or packaging equipment, this servo motor drive provides the speed and precision necessary for efficient operation. Equipped with advanced servo technology, the LIQI Series Servo Motor Drive ensures precise control over speed, torque, and position. This enables smooth and accurate motion, enhancing productivity and quality in industrial processes. Constructed with durability in mind, the Panasonic LIQI Series Servo Motor Drive is built using high-quality materials and undergoes rigorous testing to ensure long-term reliability in demanding industrial environments. Its robust design ensures consistent performance, minimizing downtime and maximizing productivity. Whether you're upgrading existing machinery or designing new automation systems, the Panasonic LIQI Series Servo Motor Drive with 3000 RPM speed offers a dependable and advanced solution. With its high-speed capabilities, precise control, and durable construction, this servo motor drive drives efficiency and success in industrial automation applications.

Series : LIQI Series

Speed (RPM) : 3000.0

Brake : Without Brake

Type : Servo Motor

Input Power Supply : Single Phase / 3 Phase 200 V

Explore other Variants (2)

Ships within 4 days

Mitsubishi Servo Amplifier for Linear Motor, MR-J4-A-RJJ051

By Mitsubishi

₹57,819 - ₹73,159

You save ₹25,135!

25.57% OFF

The Mitsubishi Servo Amplifier for Linear Motor, MR-J4-A-RJJ051, is designed to deliver high-precision control and stable performance in linear motion applications. Engineered as part of the MELSERVO-J4 series, this amplifier supports advanced servo control with high-speed response and accurate positioning capabilities. It is optimized for use with linear servo motors, enabling smooth motion, reduced vibration, and consistent thrust performance across demanding industrial operations. Built to operate within 200 V class systems, the MR-J4-A-RJJ051 supports flexible integration with compatible linear motor configurations. It features advanced functions such as auto-tuning and built-in positioning, allowing efficient setup and reliable operation. Designed for durability and precision, this servo amplifier ensures consistent performance in applications requiring accurate linear motion control, including semiconductor equipment, precision assembly systems, and automated production machinery.

Type of Product : Servo amplifier for linear motor

Power Supply : 200 VAC - 240 VAC

Series : MELSERVO-J4

Cooling Method : Natural cooling

Explore other Variants (2)

Ships within 7 days

Oriental Reversible Motors 90 mm Frame Size, 5RK40GN-CW2L2

By Oriental

₹7,315  

The Oriental Reversible Motor 5RK40GN-CW2L2 is a high-performance motor designed for applications requiring precise forward and reverse operation. With a 90 mm frame size, this motor provides a compact yet powerful solution for various industrial and automation systems. It delivers a rated output of 40W, ensuring efficient performance in speed and torque control. Built for durability, the 5RK40GN-CW2L2 features a high-quality construction that ensures reliable operation and long service life. Its reversible functionality allows for quick directional changes, making it ideal for conveyors, packaging machines, and automated equipment. This motor integrates seamlessly with compatible gearheads, enhancing versatility and efficiency in motion control applications. Whether for industrial automation, robotics, or material handling, the Oriental Reversible Motor 5RK40GN-CW2L2 is a trusted choice for smooth, consistent, and precise operation.

Add to Cart Buy Now

Ships within 6 days

Invento SG90S Mini Micro Servo Motor 3-7.2 V Operating Voltage 1 Kg/cm Stall Torque 22x11.5x22.5 mm, ISC 136 (Pack of 4 Kit)

By Invento

Pack of 4 kit

₹801   ₹1,100

You save ₹299!

27.17% OFF

Invento SG90S Mini Micro Servo Motor 3-7.2 V Operating Voltage 1 Kg/cm Stall Torque 22x11.5x22.5 mm, ISC 136 (Pack of 4 Kit) is designed to deliver reliable performance and efficient usability for a wide range of technical and professional applications. Developed with precision and durability in mind, this product supports consistent operation while maintaining stability and ease of use. Its robust construction ensures long-lasting service, making it suitable for engineers, technicians, and hobbyists working on demanding tasks. Invento SG90S MiniMicro Servo Motor 3-7.2 V Operating Voltage 1 Kg/cm Stall Torque 22x11.5x22.5 mm, ISC 136 (Pack of 4 Kit) offers a balanced combination of quality materials and practical functionality, helping users achieve dependable results across various setups. Invento SG90S Mini Micro Servo Motor 3-7.2 V Operating Voltage 1 Kg/cm Stall Torque 22x11.5x22.5 mm, ISC 136 (Pack of 4 Kit) is an ideal choice for users seeking durability, performance, and convenience in one solution. It is well suited for workshops, laboratories,

Add to Cart Buy Now

Ships within 6 days

Invento SG90S Mini Micro Servo Motor 3-7.2 V Operating Voltage 1 Kg/cm Stall Torque 22x11.5x22.5 mm, ISC 135-1 (Pack of 2 Kit)

By Invento

Pack of 2 kit

₹601   ₹750

You save ₹149!

19.92% OFF

Invento SG90S Mini Micro Servo Motor 3-7.2 V Operating Voltage 1 Kg/cm Stall Torque 22x11.5x22.5 mm, ISC 135-1 (Pack of 2 Kit) is designed to deliver reliable performance and efficient usability for a wide range of technical and professional applications. Developed with precision and durability in mind, this product supports consistent operation while maintaining stability and ease of use. Its robust construction ensures long-lasting service, making it suitable for engineers, technicians, and hobbyists working on demanding tasks. Invento SG90S MiniMicro Servo Motor 3-7.2 V Operating Voltage 1 Kg/cm Stall Torque 22x11.5x22.5 mm, ISC 135-1 (Pack of 2 Kit) offers a balanced combination of quality materials and practical functionality, helping users achieve dependable results across various setups. Invento SG90S Mini Micro Servo Motor 3-7.2 V Operating Voltage 1 Kg/cm Stall Torque 22x11.5x22.5 mm, ISC 135-1 (Pack of 2 Kit) is an ideal choice for users seeking durability, performance, and convenience in one solution. It is well suited for workshops, laboratories,

Add to Cart Buy Now

Ships within 6 days

Invento SG90S Mini Micro Servo Motor 3-7.2 V Operating Voltage 1 Kg/cm Stall Torque 22x11.5x22.5 mm, ISC 134-1

By Invento

₹612   ₹700

You save ₹88!

12.54% OFF

Invento SG90S Mini Micro Servo Motor 3-7.2 V Operating Voltage 1 Kg/cm Stall Torque 22x11.5x22.5 mm, ISC 134-1 is designed to deliver reliable performance and efficient usability for a wide range of technical and professional applications. Developed with precision and durability in mind, this product supports consistent operation while maintaining stability and ease of use. Its robust construction ensures long-lasting service, making it suitable for engineers, technicians, and hobbyists working on demanding tasks. Invento SG90S Mini Micro Servo Motor 3-7.2V Operating Voltage 1 Kg/cm Stall Torque 22x11.5x22.5 mm, ISC 134-1 offers a balanced combination of quality materials and practical functionality, helping users achieve dependable results across various setups. Invento SG90S Mini Micro Servo Motor 3-7.2 V Operating Voltage 1 Kg/cm Stall Torque 22x11.5x22.5 mm, ISC 134-1 is an ideal choice for users seeking durability, performance, and convenience in one solution. It is well suited for workshops, laboratories, and DIY projects where consistent output and reliable operation are essential. The

Add to Cart Buy Now

Ships within 6 days

Invento 48-72 V Metal Geared Servo Motor for Plane, Helicopter, Boat, Car and Quadcopter - ISC013/ISC014

By Invento

Pack of 2 piece

₹837 - ₹1,651

The "Invento 48-72 V Metal Geared Servo Motor for Plane, Helicopter, Boat, Car, and Quadcopter - ISC013/ISC014" refers to a high-performance servo motor designed for various remote-controlled (RC) and autonomous vehicles, including planes, helicopters, boats, cars, and quadcopters. This servo motor is specifically engineered to operate within a voltage range of 48 to 72 volts, providing robust and precise control of movement for these types of vehicles. The ISC013/ISC014 labeling serves as a unique identifier for the specific models within this servo motor series, facilitating easy identification, selection, and compatibility matching for hobbyists, RC enthusiasts, DIY builders, and professionals in the field of robotics and vehicle automation. Constructed with high-quality materials and featuring a durable metal gearing system, the "Invento 48-72 V Metal Geared Servo Motor for Plane, Helicopter, Boat, Car, and Quadcopter - ISC013/ISC014" ensures reliable and efficient performance, high torque output, and smooth movement control. The motor's robust design and compatibility with various RC and autonomous vehicle platforms make it a versatile choice for a wide range of applications and projects. Whether used for steering, throttle control, wing flaps, rudder adjustments, or other motion control functions in RC planes, helicopters, boats, cars, or quadcopters, the "Invento 48-72 V Metal Geared Servo Motor - ISC013/ISC014" offers a practical and high-performance solution for integrating precise and responsive servo motor control into custom-built or upgraded vehicle systems. In summary, the "Invento 48-72 V Metal Geared Servo Motor for Plane, Helicopter, Boat, Car, and Quadcopter - ISC013/ISC014" represents a high-quality and specialized servo motor tailored for demanding applications in RC and autonomous vehicle control. With its durable construction, high torque output, precise control, and broad compatibility, this innovative servo motor series caters to the diverse needs of users seeking reliable and efficient motion control solutions for their vehicle projects and automation applications.

Type of Product : Metal Gear Servo Motor

Usage For : Plane, Helicopter, Boat, Car and Quadcopter

Explore other Variants (2)

Ships within 6 days

Invento ISC012 15 kg-cm Metal Geared Servo Motor for Plane, Helicopter, Boat, Car and Quadcopter

By Invento

Pack of 2 piece

₹1,651 - ₹6,135

The "Invento ISC012 15 kg-cm Metal Geared Servo Motor for Plane, Helicopter, Boat, Car, and Quadcopter" is a high-torque servo motor specifically designed for a wide range of remote-controlled (RC) and autonomous vehicles. With a torque rating of 15 kg-cm, this servo motor offers robust and precise movement control suitable for various applications in planes, helicopters, boats, cars, and quadcopters. The ISC012 labeling serves as a unique identifier for this particular model of metal-geared servo motor, facilitating easy identification, selection, and compatibility matching for hobbyists, RC enthusiasts, DIY builders, and professionals engaged in robotics and vehicle automation projects. Constructed with high-quality materials and featuring a durable metal gearing system, the "Invento ISC012 15 kg-cm Metal Geared Servo Motor" ensures reliable performance, high torque output, and smooth movement control. Its robust design, combined with its compatibility with various RC and autonomous vehicle platforms, makes it a versatile choice for a broad range of applications and projects requiring precise and powerful servo motor control. Whether used for steering, throttle control, wing flaps, rudder adjustments, or other motion control functions in RC planes, helicopters, boats, cars, or quadcopters, the "Invento ISC012 15 kg-cm Metal Geared Servo Motor" provides a practical and high-performance solution for integrating reliable and responsive servo motor control into custom-built or upgraded vehicle systems. In summary, the "Invento ISC012 15 kg-cm Metal Geared Servo Motor for Plane, Helicopter, Boat, Car, and Quadcopter" represents a high-quality and specialized servo motor tailored for demanding applications in RC and autonomous vehicle control. With its durable construction, high torque output, precise control, and broad compatibility, this innovative servo motor caters to the diverse needs of users seeking efficient and reliable motion control solutions for their vehicle projects and automation applications.

Type of Product : Metal Gear Servo Motor

Usage For : Plane, Helicopter, Boat, Car and Quadcopter

Explore other Variants (4)

Ships within 6 days

Invento Metal Geared Servo Motor for Plane, Helicopter, Boat, Car and Quadcopter 4.8V to 7.2V

By Invento

₹695 - ₹931

The "Invento Metal Geared Servo Motor for Plane, Helicopter, Boat, Car, and Quadcopter 4.8V to 7.2V" refers to a versatile servo motor designed for a variety of remote-controlled (RC) and autonomous vehicles. This servo motor is engineered to operate within a voltage range of 4.8V to 7.2V, providing reliable and precise movement control for different vehicle systems. The servo motor's compatibility with a voltage range of 4.8V to 7.2V makes it suitable for a wide range of applications in planes, helicopters, boats, cars, and quadcopters. Its adaptability to different voltage levels allows for flexible integration into various electronic systems and projects. Constructed with high-quality materials and featuring a durable metal gearing system, the "Invento Metal Geared Servo Motor for Plane, Helicopter, Boat, Car, and Quadcopter" ensures reliable performance, high torque output, and smooth movement control. The motor's robust design and compatibility with various RC and autonomous vehicle platforms make it a versatile choice for a broad range of applications and projects. Whether used for steering, throttle control, wing flaps, rudder adjustments, or other motion control functions in RC planes, helicopters, boats, cars, or quadcopters, the "Invento Metal Geared Servo Motor" offers a practical and high-performance solution for integrating precise and responsive servo motor control into custom-built or upgraded vehicle systems. In summary, the "Invento Metal Geared Servo Motor for Plane, Helicopter, Boat, Car, and Quadcopter 4.8V to 7.2V" represents a high-quality and versatile servo motor tailored for demanding applications in RC and autonomous vehicle control. With its durable construction, adaptability to different voltage levels, precise control, and broad compatibility, this innovative servo motor caters to the diverse needs of users seeking efficient and reliable motion control solutions for their vehicle projects and automation applications.

Type of Product : Metal Gear Servo Motor

Usage For : Plane, Helicopter, Boat, Car and Quadcopter

Explore other Variants (2)

Ships within 6 days

Invento ISC010 1.8kg-cm Metal Geared Servo Motor for Plane, Helicopter, Boat, Car and Quadcopter

By Invento

Pack of 2 piece

₹1,096 - ₹4,719

The "Invento ISC010 1.8kg-cm Metal Geared Servo Motor for Plane, Helicopter, Boat, Car, and Quadcopter" refers to a specialized servo motor designed for a variety of remote-controlled (RC) and autonomous vehicles, including planes, helicopters, boats, cars, and quadcopters. This servo motor is engineered to deliver a torque of 1.8kg-cm, providing precise and responsive movement control for different vehicle systems. The ISC010 labeling serves as a unique identifier for this specific model of the metal-geared servo motor, facilitating easy identification, selection, and compatibility matching for hobbyists, RC enthusiasts, DIY builders, and professionals involved in robotics and vehicle automation projects. Constructed with high-quality materials and featuring a durable metal gearing system, the "Invento ISC010 1.8kg-cm Metal Geared Servo Motor for Plane, Helicopter, Boat, Car, and Quadcopter" ensures reliable and efficient performance, high torque output, and smooth movement control. The motor's compact design, robust construction, and compatibility with various RC and autonomous vehicle platforms make it a versatile choice for a wide range of applications and projects. Whether used for steering, throttle control, wing flaps, rudder adjustments, or other motion control functions in RC planes, helicopters, boats, cars, or quadcopters, the "Invento ISC010 1.8kg-cm Metal Geared Servo Motor" offers a practical and high-performance solution for integrating precise and responsive servo motor control into custom-built or upgraded vehicle systems. In summary, the "Invento ISC010 1.8kg-cm Metal Geared Servo Motor for Plane, Helicopter, Boat, Car, and Quadcopter" represents a high-quality and specialized servo motor tailored for demanding applications in RC and autonomous vehicle control. With its durable construction, high torque output, precise control, and broad compatibility, this innovative servo motor caters to the diverse needs of users seeking reliable and efficient motion control solutions for their vehicle projects and automation applications.

Type of Product : Metal Gear Servo Motor

Usage For : Plane, Helicopter, Boat, Car and Quadcopter

Explore other Variants (4)

Ships within 6 days

Invento ISC 011 -1 15 kg-cm Metal Geared Servo Motor for Plane, Helicopter, Boat, Car and Quadcopter

By Invento

₹1,014  

Add to Cart Buy Now

Ships within 6 days

Invento ISC 009 -1 1.8kg-cm Metal Geared Servo Motor for Plane, Helicopter, Boat, Car and Quadcopter

By Invento

₹695  

Add to Cart Buy Now

Ships within 7 days

Fuji Electric 0.75 Kw Servo Motor RYH751F5-VV2

By Fuji Electric

₹40,119  

A servo motor RYH751F5-VV2 (often just called a servomotor) is a specific type of electric motor that is used to actuate a mechanism in response to the application of an input signal. Most commonly, this mechanism is a part of an electromechanical system such as an actuator, a valve, or a pump. Most servo motors contain multiple windings that are used to provide the required torque and rotational speed in response to the input signal being received. In its most basic form, a servo motor consists of two windings: one primary winding and one secondary winding. The primary winding provides current to the motor's rotor so that it can spin freely when power is not applied. The secondary winding provides current only when it receives an input signal from the controller, allowing it to affect the rotor's position. The secondary winding is typically used to provide feedback on the position of the rotor; however, other types of signals can be sent to control it as well. When receiving an input signal from the controller, at least some current must be supplied by the secondary winding for the motor to rotate. When this happens, a phase difference between voltages applied simultaneously to both windings results in motion of the rotor. This motion is proportional to both.

Add to Cart Buy Now

Ships within 7 days

Fuji Electric 400W Servo Motor GYB401D5-RC2

By Fuji Electric

₹40,119  

A servo motor GYB401D5-RC2 (often just called a servomotor) is a specific type of electric motor that is used to actuate a mechanism in response to the application of an input signal. Most commonly, this mechanism is a part of an electromechanical system such as an actuator, a valve, or a pump. Most servo motors contain multiple windings that are used to provide the required torque and rotational speed in response to the input signal being received. In its most basic form, a servo motor consists of two windings: one primary winding and one secondary winding. The primary winding provides current to the motor's rotor so that it can spin freely when power is not applied. The secondary winding provides current only when it receives an input signal from the controller, allowing it to affect the rotor's position. The secondary winding is typically used to provide feedback on the position of the rotor; however, other types of signals can be sent to control it as well. When receiving an input signal from the controller, at least some current must be supplied by the secondary winding for the motor to rotate. When this happens, a phase difference between voltages applied simultaneously to both windings results in motion of the rotor. This motion is proportional to both.

Add to Cart Buy Now

Ships within 7 days

Fuji Electric 3-Phase Fujiu Servo Amplifier, RYH202F5-VV2

By Fuji Electric

₹60,179  

The Fuji Electric 3-Phase Fujiu Servo Amplifier, exemplified by the RYH202F5-VV2 model, stands as a sophisticated and reliable component in the realm of industrial automation. Tailored for precision control in three-phase servo motor systems, this amplifier offers advanced features that elevate its performance in various applications. The RYH202F5-VV2 is designed to complement Fuji Electric's servo motors, providing seamless integration for applications demanding precise speed, position, and torque control. One notable feature of the RYH202F5-VV2 is its versatility in handling a range of motion control requirements. The amplifier supports dynamic response times and high-frequency operation, making it suitable for applications where rapid and accurate adjustments are crucial. Its compatibility with various feedback devices enhances its adaptability to different servo motor configurations, contributing to a broad spectrum of industrial automation scenarios. The user-friendly interface of the RYH202F5-VV2 facilitates straightforward setup and configuration, streamlining the integration process into existing control systems. The amplifier's advanced control algorithms contribute to the optimization of motor performance, ensuring precise and efficient operation. Additionally, the robust construction of the amplifier, consistent with Fuji Electric's quality standards, enhances its reliability in demanding industrial environments. In summary, the Fuji Electric 3-Phase Fujiu Servo Amplifier RYH202F5-VV2 represents a technological advancement in the realm of motion control. Its compatibility with Fuji Electric servo motors, versatile control features, and robust construction make it a valuable component in applications such as robotics, CNC machinery, and automated manufacturing where precision and reliability are paramount. The RYH202F5-VV2 stands as a testament to Fuji Electric's commitment to delivering high-performance solutions for industrial automation challenges.

Add to Cart Buy Now

Ships within 7 days

Fuji Electric 3-Phase Servo Amplifier, RYH201F5-VV2

By Fuji Electric

₹29,499  

The Fuji Electric 3-Phase Servo Amplifier, model RYH201F5-VV2, stands as a pinnacle of advanced servo control technology, offering unparalleled precision and performance in industrial automation applications. Engineered for 3-phase systems, this servo amplifier excels in providing dynamic and responsive control over servo motors, enabling precise and efficient motion control in a variety of industrial processes. The RYH201F5-VV2 boasts a high level of versatility, accommodating a wide range of applications due to its adaptability to different servo motor types and sizes. Its sophisticated control algorithms and feedback mechanisms ensure optimal torque and speed control, allowing for seamless integration into applications where precision and reliability are paramount. One noteworthy feature of the RYH201F5-VV2 is its ability to deliver smooth and precise motion profiles, resulting in enhanced machine performance and productivity. This is particularly beneficial in applications such as robotics, CNC machinery, and other motion-intensive processes where accuracy and repeatability are critical. Furthermore, the servo amplifier is designed with user-friendly interfaces and intuitive programming options, simplifying the setup and configuration process. This ease of use contributes to a reduction in installation time and ensures that operators can harness the full capabilities of the servo amplifier without extensive training. In terms of durability and reliability, Fuji Electric's commitment to quality is evident in the RYH201F5-VV2. Its robust construction and adherence to industry standards for performance and safety make it a dependable component for demanding industrial environments. In conclusion, the Fuji Electric 3-Phase Servo Amplifier, RYH201F5-VV2, represents a pinnacle of servo control technology, offering precision, versatility, and reliability for industrial automation applications. Whether applied in manufacturing, robotics, or other motion control scenarios, this servo amplifier is a powerful solution for achieving precise and efficient control over servo motors in 3-phase systems.

Add to Cart Buy Now

Ships within 7 days

Fuji Electric 3-Phase AC Servo Motor without Brake, GYG202C5-RG2

By Fuji Electric

₹54,279  

The Fuji Electric 3-Phase AC Servo Motor, specifically the GYG202C5-RG2 model, represents a high-performance component designed for precision and dynamic control in industrial automation applications. This servo motor, devoid of a brake mechanism, is tailored to deliver reliable and efficient motion control in scenarios where braking is not a primary requirement. With a focus on responsiveness and accuracy, the GYG202C5-RG2 is well-suited for tasks such as positioning, speed regulation, and torque control in diverse industrial settings. This servo motor's three-phase design aligns with the requirements of sophisticated motion control systems, catering to the demands of industrial machinery and robotics. The absence of a brake simplifies its integration into applications where braking functionality is either unnecessary or provided by an external system. The GYG202C5-RG2 exhibits a robust construction, ensuring durability and reliability under varying operational conditions. Fuji Electric's commitment to precision is evident in the GYG202C5-RG2's performance characteristics, which include high torque density and rapid response times. These attributes make it suitable for applications demanding precise and swift movements, such as in CNC machinery, robotics, and automated manufacturing processes. The motor's design reflects a balance between power and efficiency, contributing to energy savings and operational optimization. In conclusion, the Fuji Electric 3-Phase AC Servo Motor GYG202C5-RG2, crafted without a brake, emerges as a specialized solution for applications where dynamic and precise motion control is paramount. Its three-phase design, reliability, and performance characteristics position it as a valuable component in industrial automation, contributing to enhanced efficiency and accuracy in a variety of motion control scenarios.

Add to Cart Buy Now

Ships within 7 days

Fuji Electric 3-Phase Servo Motor, GYG152C5-RG2

By Fuji Electric

₹46,019  

The Fuji Electric 3-Phase Servo Motor, represented by the GYG152C5-RG2 model, is a high-performance and precision-engineered component designed to meet the demanding requirements of industrial motion control systems. This servo motor exemplifies Fuji Electric's commitment to delivering advanced technology for dynamic and accurate motion applications. With a three-phase configuration, the GYG152C5-RG2 excels in providing robust and efficient power to drive machinery and equipment with precision. This servo motor stands out for its impressive performance characteristics, including high torque density, rapid response times, and exceptional positioning accuracy. Such attributes make it an ideal choice for applications demanding precise control, such as robotics, CNC machinery, and automated manufacturing processes. The GYG152C5-RG2's advanced design incorporates features like rare-earth magnets and precision engineering, ensuring not only high performance but also durability in demanding operational environments. Fuji Electric places a strong emphasis on user-friendly integration, and the GYG152C5-RG2 is no exception. The motor is designed to seamlessly integrate with Fuji Electric's servo drive systems, allowing for simplified setup and optimization. This synergy between motor and drive enhances the overall efficiency and effectiveness of the motion control system, providing users with a reliable and adaptable solution for their diverse industrial automation needs. In summary, the Fuji Electric 3-Phase Servo Motor GYG152C5-RG2 is a testament to the company's commitment to delivering cutting-edge technology for precision motion control. Its combination of high performance, accuracy, and user-friendly integration makes it a valuable asset for industries requiring sophisticated motion control solutions, ultimately contributing to increased productivity and operational efficiency.

Add to Cart Buy Now

Ships within 7 days

Omron Black Ac Servo Motors, R88M-KE75030H-S2

By Omron

₹56,639  

Omron Black Ac Servo Motors, R88M-KE75030H-S2 AC servo motors with EtherCAT communication capability, often integrated with absolute encoders for precise and reliable motion control in industrial applications. EtherCAT is a real-time industrial Ethernet protocol, and its integration with AC servo motors enhances communication speed and accuracy in automation systems. Omron's AC servo motors equipped with EtherCAT communication are designed to deliver high-performance motion control in demanding environments. The integration of EtherCAT facilitates rapid and synchronized communication between the servo motor and other devices on the network, ensuring precise and coordinated motion in real-time. The inclusion of an absolute encoder in these servo motors is a critical feature. Absolute encoders provide position feedback without the need for a homing routine upon power-up. This means that the servo system instantly knows the rotor position, allowing for quick and accurate positioning, even after a power interruption. Absolute encoders contribute to the reliability and efficiency of the motion control system, particularly in applications where precision and repeatability are paramount. Omron's AC servo motors often come with a range of motor sizes and power ratings, catering to diverse application requirements. The absolute encoder's resolution and accuracy contribute to the overall precision of the motor's positioning and speed control. Users can typically configure and monitor Omron's AC servo motors with EtherCAT through user-friendly software tools provided by Omron. These tools may offer features for parameter setting, tuning, and real-time monitoring, ensuring ease of integration and maintenance.

Add to Cart Buy Now

Ships within 7 days

Omron Black G5-Series Pulse Train Input Type Ac Servomotors, R88M-KE75030H-BS2

By Omron

₹89,679  

Omron Black G5-Series Pulse Train Input Type Ac Servomotors, R88M-KE75030H-BS2 AC servo motors with EtherCAT communication capability, often integrated with absolute encoders for precise and reliable motion control in industrial applications. EtherCAT is a real-time industrial Ethernet protocol, and its integration with AC servo motors enhances communication speed and accuracy in automation systems. Omron's AC servo motors equipped with EtherCAT communication are designed to deliver high-performance motion control in demanding environments. The integration of EtherCAT facilitates rapid and synchronized communication between the servo motor and other devices on the network, ensuring precise and coordinated motion in real-time. The inclusion of an absolute encoder in these servo motors is a critical feature. Absolute encoders provide position feedback without the need for a homing routine upon power-up. This means that the servo system instantly knows the rotor position, allowing for quick and accurate positioning, even after a power interruption. Absolute encoders contribute to the reliability and efficiency of the motion control system, particularly in applications where precision and repeatability are paramount. Omron's AC servo motors often come with a range of motor sizes and power ratings, catering to diverse application requirements. The absolute encoder's resolution and accuracy contribute to the overall precision of the motor's positioning and speed control. Users can typically configure and monitor Omron's AC servo motors with EtherCAT through user-friendly software tools provided by Omron. These tools may offer features for parameter setting, tuning, and real-time monitoring, ensuring ease of integration and maintenance.

Add to Cart Buy Now

Ships within 7 days

Omron 0.4Kw Ac Servo Motor, R88M-KE40030H-S2

By Omron

₹40,119  

Omron 0.4Kw Ac Servo Motor, R88M-KE40030H-S2 AC servo motors with EtherCAT communication capability, often integrated with absolute encoders for precise and reliable motion control in industrial applications. EtherCAT is a real-time industrial Ethernet protocol, and its integration with AC servo motors enhances communication speed and accuracy in automation systems. Omron's AC servo motors equipped with EtherCAT communication are designed to deliver high-performance motion control in demanding environments. The integration of EtherCAT facilitates rapid and synchronized communication between the servo motor and other devices on the network, ensuring precise and coordinated motion in real-time. The inclusion of an absolute encoder in these servo motors is a critical feature. Absolute encoders provide position feedback without the need for a homing routine upon power-up. This means that the servo system instantly knows the rotor position, allowing for quick and accurate positioning, even after a power interruption. Absolute encoders contribute to the reliability and efficiency of the motion control system, particularly in applications where precision and repeatability are paramount. Omron's AC servo motors often come with a range of motor sizes and power ratings, catering to diverse application requirements. The absolute encoder's resolution and accuracy contribute to the overall precision of the motor's positioning and speed control. Users can typically configure and monitor Omron's AC servo motors with EtherCAT through user-friendly software tools provided by Omron. These tools may offer features for parameter setting, tuning, and real-time monitoring, ensuring ease of integration and maintenance.

Add to Cart Buy Now

Ships within 7 days

Omron Black 1S Ac Servo Motor 750 W Absolute Encoder, R88M-1M75030T-S2

By Omron

₹1,12,099  

Omron Black 1S Ac Servo Motor 750 W Absolute Encoder
, R88M-1M75030T-S2 AC servo motors with EtherCAT communication capability, often integrated with absolute encoders for precise and reliable motion control in industrial applications. EtherCAT is a real-time industrial Ethernet protocol, and its integration with AC servo motors enhances communication speed and accuracy in automation systems. Omron's AC servo motors equipped with EtherCAT communication are designed to deliver high-performance motion control in demanding environments. The integration of EtherCAT facilitates rapid and synchronized communication between the servo motor and other devices on the network, ensuring precise and coordinated motion in real-time. The inclusion of an absolute encoder in these servo motors is a critical feature. Absolute encoders provide position feedback without the need for a homing routine upon power-up. This means that the servo system instantly knows the rotor position, allowing for quick and accurate positioning, even after a power interruption. Absolute encoders contribute to the reliability and efficiency of the motion control system, particularly in applications where precision and repeatability are paramount. Omron's AC servo motors often come with a range of motor sizes and power ratings, catering to diverse application requirements. The absolute encoder's resolution and accuracy contribute to the overall precision of the motor's positioning and speed control. Users can typically configure and monitor Omron's AC servo motors with EtherCAT through user-friendly software tools provided by Omron. These tools may offer features for parameter setting, tuning, and real-time monitoring, ensuring ease of integration and maintenance.

Add to Cart Buy Now

Ships within 7 days

Omron Black 1S Ac Servo Motor 400 W Absolute Encoder, R88M-1M40030T-S2

By Omron

₹89,679  

Omron Black 1S Ac Servo Motor 400 W Absolute Encoder
, R88M-1M40030T-S2 AC servo motors with EtherCAT communication capability, often integrated with absolute encoders for precise and reliable motion control in industrial applications. EtherCAT is a real-time industrial Ethernet protocol, and its integration with AC servo motors enhances communication speed and accuracy in automation systems. Omron's AC servo motors equipped with EtherCAT communication are designed to deliver high-performance motion control in demanding environments. The integration of EtherCAT facilitates rapid and synchronized communication between the servo motor and other devices on the network, ensuring precise and coordinated motion in real-time. The inclusion of an absolute encoder in these servo motors is a critical feature. Absolute encoders provide position feedback without the need for a homing routine upon power-up. This means that the servo system instantly knows the rotor position, allowing for quick and accurate positioning, even after a power interruption. Absolute encoders contribute to the reliability and efficiency of the motion control system, particularly in applications where precision and repeatability are paramount. Omron's AC servo motors often come with a range of motor sizes and power ratings, catering to diverse application requirements. The absolute encoder's resolution and accuracy contribute to the overall precision of the motor's positioning and speed control. Users can typically configure and monitor Omron's AC servo motors with EtherCAT through user-friendly software tools provided by Omron. These tools may offer features for parameter setting, tuning, and real-time monitoring, ensuring ease of integration and maintenance.

Add to Cart Buy Now

Ships within 7 days

Omron Black 1S Ac Servo Motor 400 Vac Absolute EncoderWith Brake, R88M-1M3K010C-BS2

By Omron

₹3,77,599  

Omron Black 1S Ac Servo Motor 400 Vac Absolute EncoderWith Brake, R88M-1M3K010C-BS2 AC servo motors with EtherCAT communication capability, often integrated with absolute encoders for precise and reliable motion control in industrial applications. EtherCAT is a real-time industrial Ethernet protocol, and its integration with AC servo motors enhances communication speed and accuracy in automation systems. Omron's AC servo motors equipped with EtherCAT communication are designed to deliver high-performance motion control in demanding environments. The integration of EtherCAT facilitates rapid and synchronized communication between the servo motor and other devices on the network, ensuring precise and coordinated motion in real-time. The inclusion of an absolute encoder in these servo motors is a critical feature. Absolute encoders provide position feedback without the need for a homing routine upon power-up. This means that the servo system instantly knows the rotor position, allowing for quick and accurate positioning, even after a power interruption. Absolute encoders contribute to the reliability and efficiency of the motion control system, particularly in applications where precision and repeatability are paramount. Omron's AC servo motors often come with a range of motor sizes and power ratings, catering to diverse application requirements. The absolute encoder's resolution and accuracy contribute to the overall precision of the motor's positioning and speed control. Users can typically configure and monitor Omron's AC servo motors with EtherCAT through user-friendly software tools provided by Omron. These tools may offer features for parameter setting, tuning, and real-time monitoring, ensuring ease of integration and maintenance.

Add to Cart Buy Now

Ships within 7 days

Omron Black 1S Ac Servo Motor200 W, R88M-1M20030T-S2

By Omron

₹76,699  

Omron Black 1S Ac Servo Motor200 W, R88M-1M20030T-S2 AC servo motors with EtherCAT communication capability, often integrated with absolute encoders for precise and reliable motion control in industrial applications. EtherCAT is a real-time industrial Ethernet protocol, and its integration with AC servo motors enhances communication speed and accuracy in automation systems. Omron's AC servo motors equipped with EtherCAT communication are designed to deliver high-performance motion control in demanding environments. The integration of EtherCAT facilitates rapid and synchronized communication between the servo motor and other devices on the network, ensuring precise and coordinated motion in real-time. The inclusion of an absolute encoder in these servo motors is a critical feature. Absolute encoders provide position feedback without the need for a homing routine upon power-up. This means that the servo system instantly knows the rotor position, allowing for quick and accurate positioning, even after a power interruption. Absolute encoders contribute to the reliability and efficiency of the motion control system, particularly in applications where precision and repeatability are paramount. Omron's AC servo motors often come with a range of motor sizes and power ratings, catering to diverse application requirements. The absolute encoder's resolution and accuracy contribute to the overall precision of the motor's positioning and speed control. Users can typically configure and monitor Omron's AC servo motors with EtherCAT through user-friendly software tools provided by Omron. These tools may offer features for parameter setting, tuning, and real-time monitoring, ensuring ease of integration and maintenance.

Add to Cart Buy Now

Ships within 7 days

Omron Black 1S Ac Servo Motor Absolute Encoder, R88M-1M1K520T-S2

By Omron

₹1,05,019  

Omron Black 1S Ac Servo Motor Absolute Encoder, R88M-1M1K520T-S2 AC servo motors with EtherCAT communication capability, often integrated with absolute encoders for precise and reliable motion control in industrial applications. EtherCAT is a real-time industrial Ethernet protocol, and its integration with AC servo motors enhances communication speed and accuracy in automation systems. Omron's AC servo motors equipped with EtherCAT communication are designed to deliver high-performance motion control in demanding environments. The integration of EtherCAT facilitates rapid and synchronized communication between the servo motor and other devices on the network, ensuring precise and coordinated motion in real-time. The inclusion of an absolute encoder in these servo motors is a critical feature. Absolute encoders provide position feedback without the need for a homing routine upon power-up. This means that the servo system instantly knows the rotor position, allowing for quick and accurate positioning, even after a power interruption. Absolute encoders contribute to the reliability and efficiency of the motion control system, particularly in applications where precision and repeatability are paramount. Omron's AC servo motors often come with a range of motor sizes and power ratings, catering to diverse application requirements. The absolute encoder's resolution and accuracy contribute to the overall precision of the motor's positioning and speed control. Users can typically configure and monitor Omron's AC servo motors with EtherCAT through user-friendly software tools provided by Omron. These tools may offer features for parameter setting, tuning, and real-time monitoring, ensuring ease of integration and maintenance.

Add to Cart Buy Now

Ships within 7 days

Omron Black 1S Ac Servo Motor Absolute Encoder With Brake, R88M-1M1K520T-BS2

By Omron

₹1,53,399  

Omron Black 1S Ac Servo Motor Absolute Encoder With Brake, R88M-1M1K520T-BS2 AC servo motors with EtherCAT communication capability, often integrated with absolute encoders for precise and reliable motion control in industrial applications. EtherCAT is a real-time industrial Ethernet protocol, and its integration with AC servo motors enhances communication speed and accuracy in automation systems. Omron's AC servo motors equipped with EtherCAT communication are designed to deliver high-performance motion control in demanding environments. The integration of EtherCAT facilitates rapid and synchronized communication between the servo motor and other devices on the network, ensuring precise and coordinated motion in real-time. The inclusion of an absolute encoder in these servo motors is a critical feature. Absolute encoders provide position feedback without the need for a homing routine upon power-up. This means that the servo system instantly knows the rotor position, allowing for quick and accurate positioning, even after a power interruption. Absolute encoders contribute to the reliability and efficiency of the motion control system, particularly in applications where precision and repeatability are paramount. Omron's AC servo motors often come with a range of motor sizes and power ratings, catering to diverse application requirements. The absolute encoder's resolution and accuracy contribute to the overall precision of the motor's positioning and speed control. Users can typically configure and monitor Omron's AC servo motors with EtherCAT through user-friendly software tools provided by Omron. These tools may offer features for parameter setting, tuning, and real-time monitoring, ensuring ease of integration and maintenance.

Add to Cart Buy Now

Ships within 7 days

Omron Black 1S Ac Servo Motor Absolute Encoder With Brake, R88M-1M1K020T-S2

By Omron

₹87,319  

Omron Black 1S Ac Servo Motor Absolute Encoder With Brake, R88M-1M1K020T-S2 AC servo motors with EtherCAT communication capability, often integrated with absolute encoders for precise and reliable motion control in industrial applications. EtherCAT is a real-time industrial Ethernet protocol, and its integration with AC servo motors enhances communication speed and accuracy in automation systems. Omron's AC servo motors equipped with EtherCAT communication are designed to deliver high-performance motion control in demanding environments. The integration of EtherCAT facilitates rapid and synchronized communication between the servo motor and other devices on the network, ensuring precise and coordinated motion in real-time. The inclusion of an absolute encoder in these servo motors is a critical feature. Absolute encoders provide position feedback without the need for a homing routine upon power-up. This means that the servo system instantly knows the rotor position, allowing for quick and accurate positioning, even after a power interruption. Absolute encoders contribute to the reliability and efficiency of the motion control system, particularly in applications where precision and repeatability are paramount. Omron's AC servo motors often come with a range of motor sizes and power ratings, catering to diverse application requirements. The absolute encoder's resolution and accuracy contribute to the overall precision of the motor's positioning and speed control. Users can typically configure and monitor Omron's AC servo motors with EtherCAT through user-friendly software tools provided by Omron. These tools may offer features for parameter setting, tuning, and real-time monitoring, ensuring ease of integration and maintenance.

Add to Cart Buy Now

Ships within 7 days

Omron Black 1S Ac Servo Motor Absolute Encoder With Brake, R88M-1M10030T-BS2

By Omron

₹1,03,839  

Omron Black 1S Ac Servo Motor Absolute Encoder With Brake, R88M-1M10030T-BS2 AC servo motors with EtherCAT communication capability, often integrated with absolute encoders for precise and reliable motion control in industrial applications. EtherCAT is a real-time industrial Ethernet protocol, and its integration with AC servo motors enhances communication speed and accuracy in automation systems. Omron's AC servo motors equipped with EtherCAT communication are designed to deliver high-performance motion control in demanding environments. The integration of EtherCAT facilitates rapid and synchronized communication between the servo motor and other devices on the network, ensuring precise and coordinated motion in real-time. The inclusion of an absolute encoder in these servo motors is a critical feature. Absolute encoders provide position feedback without the need for a homing routine upon power-up. This means that the servo system instantly knows the rotor position, allowing for quick and accurate positioning, even after a power interruption. Absolute encoders contribute to the reliability and efficiency of the motion control system, particularly in applications where precision and repeatability are paramount. Omron's AC servo motors often come with a range of motor sizes and power ratings, catering to diverse application requirements. The absolute encoder's resolution and accuracy contribute to the overall precision of the motor's positioning and speed control. Users can typically configure and monitor Omron's AC servo motors with EtherCAT through user-friendly software tools provided by Omron. These tools may offer features for parameter setting, tuning, and real-time monitoring, ensuring ease of integration and maintenance.

Add to Cart Buy Now

Previous Next

Page 1 of 1985 results