Have a question? Call us now at +91 9650660070

Union Fittings Under 500

Showing 40 out of 1321 products

Sort by

Ships within 4 days

JELPC Stop Fitting Equal Union 10x10

By JELPC

₹695

Features:-
Fluid Admitted : Air, Vaccum.
Working Pressure: 0-1.0Mpa 0-150psi.
Working Temperature- 0-60°C.

Ships within 4 days

JELPC Stop Fitting Equal Union 8x8

By JELPC

₹612

Features:-
Fluid Admitted : Air, Vaccum.
Working Pressure: 0-1.0Mpa 0-150psi.
Working Temperature- 0-60°C.

Ships within 4 days

JELPC Stop Fitting Equal Union 6x6

By JELPC

₹518

Features:-
Fluid Admitted : Air, Vaccum.
Working Pressure: 0-1.0Mpa 0-150psi.
Working Temperature- 0-60°C.

Generic 1Inchx1Inch Olive Union Pipe Fitting

Ships within 2 days

Generic 1Inchx1Inch Olive Union Pipe Fitting

By GENERIC

₹211

The Generic 1Inchx1Inch Olive Union Pipe Fitting Connector is a pipe connector. The connector can be used with PVC, CPVC and other types of plastic pipe. It is made up of brass and is used to connect two pipes together. This connector has male threading on both ends and one end has female threading. The other end has male threading. The Generic 1Inchx1Inch Olive Union Pipe Fitting Connector, made of metal and plastic, is used to create a hard connection between two pieces of pipe. It's used for plumbing purposes and is ideal for residential and commercial use. Olive Union Fittings are a type of elbow that can be used to connect two pipes using an internal pipe thread, although it may be used in conjunction with various other fittings. This fitting was originally designed for use with oil piping systems, but is commonly used with water piping systems as well. It consists of a pipe that has been threaded on both ends, such that one end will screw into a pipe while the other end screws into another fitting or into a section of pipe. In some cases, such as with the tee connector, it will have multiple ports to be attached to in order to make a larger connection.

Related Searches

inder construction fittings

plain construction fittings

inder plain construction fittings

inder construction fittings plain

kobmax pneumatic fittings

TECHNO GPZA 12 Brass Cross Union Fitting

Ships within 5 days

TECHNO Brass Cross Union Fitting GPZA Series

By TECHNO

₹45 - ₹111

You save ₹16!

12.9% OFF

The TECHNO Cross Union Fitting is a specialized component designed for fluid distribution systems, offering a reliable and efficient solution for routing fluids in multiple directions. Shaped like a cross, this fitting allows for the connection of four pipes or hoses at right angles, facilitating the creation of complex fluid distribution networks. Crafted from high-quality materials such as durable plastics or metals, the TECHNO Cross Union Fitting ensures dependable performance and longevity in various industrial applications. Its precision engineering guarantees a secure and leak-proof connection, minimizing the risk of fluid loss and ensuring uninterrupted operation. Whether used in water distribution, chemical processing, or pneumatic systems, this fitting provides a versatile and effective solution for fluid routing needs. Easy to install and maintain, the TECHNO Cross Union Fitting offers seamless integration into existing systems, making it a preferred choice among professionals seeking reliable fluid distribution solutions.

Working Pressure : 10 kgf/cm²

Return Policy : Non Returnable

Material : Brass

Series : GPZA

Type of Product : Cross Union Fitting

Working Medium : 40 micron filtered lubricated air

Applicable Temperature : 5-50°C

Cap Type : Black Cap

AS ONE One-Touch Pipe Fitting Union Tee Union Tea, 1-497-02

Ships within 19 days

AS ONE One-Touch Pipe Fitting Union Tee Union Tea, 1-497-02

By AS ONE

Pack of 1 piece

₹506

The AS ONE AS ONE One-Touch Pipe Fitting Union Tee Union Tea, 1-497-02 is a specialized plumbing component designed to facilitate the connection of three separate tubes or pipes in a fluid or gas handling system. This union tee is part of the broader family of one-touch or push-to-connect fittings, which are known for their ease of installation and reliability.The key feature of the AS ONE AS ONE One-Touch Pipe Fitting Union Tee Union Tea, 1-497-02 is its simplicity and convenience in assembly. It is engineered for a tool-free installation, eliminating the need for complex tools or specialized skills. This makes it an ideal choice for both professional plumbers and DIY enthusiasts who require a quick and hassle-free way to create branch connections in a pipe system.The union tee consists of three ports, typically of the same size, arranged in a T-shaped configuration. Each port is equipped with a one-touch or push-to-connect mechanism, which securely grips the pipe or tubing when inserted. This creates a leak-free and dependable connection that can withstand varying pressures and fluid or gas types, depending on the material and specifications of the fitting.One of the advantages of the AS ONE AS ONE One-Touch Pipe Fitting Union Tee Union Tea, 1-497-02 is its versatility. It can be used in a wide range of applications, including compressed air systems, water supply lines, pneumatic systems, and various industrial processes. Its robust construction ensures that it can handle demanding conditions and remain leak-free for extended periods.The use of high-quality materials, such as durable plastics or metals, ensures the fitting's longevity and resistance to corrosion or wear. This means that once installed, the union tee requires minimal maintenance and can provide reliable performance over time.In summary, the AS ONE AS ONE One-Touch Pipe Fitting Union Tee Union Tea, 1-497-02 is a practical and user-friendly plumbing component that simplifies the process of creating branch connections in fluid or gas handling systems. Its ease of installation, versatility, and reliability make it a valuable choice for professionals and DIY enthusiasts alike who seek efficient and dependable plumbing solutions.

Janatics Union Multi Distributor Fitting 12 mm, WD2101210

Ships within 15 days

Janatics Union Multi Distributor Fitting 12 mm

By Janatics

₹601 - ₹754

Janatics Union Multi Distributor Fitting represents a pinnacle of efficiency and reliability in pneumatic systems. Crafted with precision engineering and cutting-edge technology, this fitting serves as the linchpin for connecting multiple pneumatic components seamlessly, optimizing performance across industrial applications. Its design incorporates robust materials, ensuring durability under rigorous operational conditions, making it a trusted choice for various industries worldwide. With its versatility, it accommodates a range of tube sizes, offering flexibility in system design without compromising on functionality. One of the standout features of the Janatics Union Multi Distributor Fitting is its ease of installation. Its intuitive design simplifies assembly, reducing downtime and streamlining maintenance procedures. This user-friendly approach enhances operational efficiency, allowing businesses to focus on productivity.

Tube Outer Diameter D1 : 12 mm

Design Type : Standard

Janatics Union Multi Distributor Fitting 10 mm, WD2101008

Ships within 15 days

Janatics Union Multi Distributor Fitting 10 mm

By Janatics

₹506 - ₹589

Tube Outer Diameter D1 : 10 mm

Design Type : Standard

Janatics Union Multi Distributor Fitting 8 mm, WD2100806

Ships within 15 days

Janatics Union Multi Distributor Fitting 8 mm

By Janatics

₹376 - ₹435

Tube Outer Diameter D1 : 8 mm

Design Type : Standard

Usage/Application : Pneumatic Fitting , Push In Fitting , Push Fitting

Janatics Union Multi Distributor Fitting 6 mm, WD2100604

Ships within 15 days

Janatics Union Multi Distributor Fitting 6 mm, WD2100604

By Janatics

₹341

Janatics Union Multi Distributor 6 mm, WD2100604 Pneumatic fittings with a union multi-distributor feature multiple outlets or ports that allow for the distribution of pneumatic (compressed air) flow to various branches or lines. These fittings are commonly used in pneumatic systems where the need arises to split a single line into several lines, facilitating the operation of various pneumatic components or devices Pneumatic fittings with a union multi-distributor have a central body or hub with multiple outlets or ports extending from it. These outlets serve as connection points for pneumatic tubing or hoses, enabling compressed air distribution to various locations The central body often features a union-style connection that allows for easy assembly and disassembly of the fitting. This feature is handy when maintenance, repairs, or modifications are required, enabling the disconnection of specific branches without affecting the entire system These fittings are typically made from materials suitable for pneumatic applications, such as brass or plastic. The choice of material depends on factors such as compatibility with compressed air, durability, and corrosion resistance Pneumatic fittings with union multi-distributors can come with various connection types, including threaded connections, push-to-connect fittings, or other pneumatic-specific connectors, depending on the system requirements and tubing/hose types used To ensure leak-free connections, these fittings may incorporate sealing mechanisms, such as O-rings or gaskets, at each outlet or port The outlets or ports can be arranged in different configurations, such as T-shaped (branching), cross-shaped, or custom designs, to suit the specific distribution needs of the pneumatic system These fittings are commonly used in pneumatic systems found in various industries, including manufacturing, automation, robotics, and industrial machinery. They are ideal for splitting compressed air lines to power multiple pneumatic actuators, cylinders, or tools Pneumatic fittings with union multi-distributors are available in various sizes to accommodate different pneumatic tubing or hose diameters and flow rates Consider the pressure rating of the fitting to ensure it can handle the operating pressure of your pneumatic system Regular inspection and maintenance are essential to ensure the integrity of the fittings and the reliability of the pneumatic connections

Panacea Technology 10 mm Dia Union Push Fitting , PY10

Ships within 14 days

Panacea Technology Union Push Fitting Y Shape Thermoplastic Polymer & Brass Material (Diameter 4 to 16 mm)

By Panacea Technology

₹34 - ₹199

Panacea Technology Union Push Fitting Y Shape Thermoplastic Polymer & Brass Material is a pneumatic connection component designed for creating a three-way tubing arrangement in compressed-air systems. Its Y-shaped configuration enables one line to branch into two directions, helping organize tubing routes within pneumatic assemblies and equipment. The fitting is constructed using thermoplastic polymer and brass material, combining lightweight structural elements with a metal component for the connection assembly. As a Pneumatic Fitting, it is suited to applications where multiple tubing paths need to be arranged from a common connection point while maintaining a compact installation layout.The Panacea Technology Union Push Fitting Y Shape Thermoplastic Polymer & Brass Material incorporates a push-fit design that facilitates tube connection without requiring a separate threaded joining process for the compatible tubing interface. Its three-way union format can be used in pneumatic circuits, automation equipment, air-control assemblies, and machinery with branching tube configurations. The Y profile provides an alternative to conventional straight connectors when airflow lines need to divide into separate routes. With its combination of thermoplastic polymer and brass components, this fitting offers a practical solution for structured pneumatic tubing arrangements where space, routing direction, and connection configuration are important considerations.

Shape : Y Shape

Material : Thermoplastic Polymer & Brass

Type of Product : Union Push Fitting

Color : Black

Kobmax KX-PUC Push In Fitting Equal Union 10 mm Size (Pack of 100)

Ships within 4 days

Kobmax KX-PUC Push In Fitting Equal Union 10 mm Size (Pack of 100)

By Kobmax

Pack of 100 piece

₹1,025 ~~₹1,711~~

You save ₹686!

40.09% OFF

Kobmax KX-PUC Push In Fitting Equal Union 10 mm Size (Pack of 100) is designed to connect two compatible 10 mm pneumatic tubes in a straight-line arrangement. This equal union fitting provides matching connection sizes at both ends and can be considered for suitable compressed-air circuits, industrial machinery, and pneumatic automation systems. The push-in connection style is intended to support convenient tubing assembly and servicing when used according to the manufacturer's instructions. Its 10 mm size helps identify the required tube dimension, while the pack of 100 is useful for bulk procurement and routine maintenance inventory. Confirm tube compatibility and operating pressure before installation. For pneumatic installations that use matching 10 mm tubing, Kobmax KX-PUC Push In Fitting Equal Union 10 mm Size (Pack of 100) offers a practical straight connection solution. The equal union configuration allows two compatible tubes of the same nominal size to be joined together. Its push-in design is intended to simplify assembly and support maintenance work in suitable systems. Before use, check that the tube material and dimensions match the fitting requirements, and ensure that each tube is properly prepared and fully inserted. Consult the manufacturer's technical specifications for operating limits and inspect connections as part of regular maintenance.

FITVIT Union 76.20 mm (3 Inch) CPVC Fitting WB

Ships within 30 days

FITVIT Union CPVC Fitting WB Off White

By FITVIT

₹990 - ₹3,303

The FITVIT CPVC Transaction Bush Pipes & Fitting Off White (Pack of 100) is designed to provide a secure and efficient transition between CPVC pipes of different diameters. Made from premium-quality CPVC material, these transaction bushes ensure durability, corrosion resistance, and long-lasting performance in residential, commercial, and industrial plumbing systems. The off-white finish delivers a clean and professional appearance while allowing easy identification during installation. Each fitting is precision-engineered to create leak-free connections, maintaining consistent water flow and system integrity across varying pipe sizes. Suitable for both hot and cold water distribution, the FITVIT CPVC Transaction Bush supports easy installation and minimal maintenance. Its robust construction ensures stable performance under varying pressure conditions, while the smooth internal surface reduces turbulence and optimizes water flow. Packaged in a set of 100, these fittings provide uniform quality for multiple installations or replacements, making them ideal for large-scale plumbing projects. With the FITVIT CPVC Transaction Bush Pipes & Fitting Off White, users can achieve durable, reliable, and efficient piping connections, enhancing the overall performance and longevity of CPVC plumbing systems.

Type of Product : Union

Material : CPVC

Application : Plumbing

Suitable For : Pipes & Fittings

Color : Off White

Country of Origin : India

Fitting Type : CPVC Fitting WB

Name of Manufacturer/Packer/Importer : Shubh Polymers

AS ONE Pipe Fitting Union Elbow, 1-515-02

Ships within 19 days

AS ONE Pipe Fitting Union Elbow, 1-515-02

By AS ONE

Pack of 1 piece

₹518

The AS ONE Pipe Fitting Union Elbow Union Elbow, 1-515-02, your dependable solution for easy and efficient pipe connections. This union elbow is meticulously designed and engineered to provide leak-free and hassle-free pipe fitting in various applications.The AS ONE Pipe Fitting Union Elbow Union Elbow, 1-515-02 simplifies the process of connecting pipes, whether for liquid transport, gas distribution, or pneumatic systems. Its one-touch design allows for quick and secure connections without the need for complex tools or extensive training. Simply push the pipe into the fitting, and you're ready to go.What sets this union elbow apart is its reliability and ease of use. It features a secure locking mechanism that ensures a leak-free connection, preventing costly fluid or gas leaks. Additionally, it is designed for durability, with materials that can withstand a wide range of pressures and temperatures.Quality and dependability are core principles at AS ONE, and the One-Touch Pipe Fitting Union Elbow embodies that commitment. It is constructed using high-quality materials and precise engineering, ensuring both its longevity and performance.Upgrade your pipe connection experience with the AS ONE Pipe Fitting Union Elbow Union Elbow, 1-515-02, where simplicity meets reliability and quality. Whether you're in plumbing, industrial piping, or any application requiring secure and leak-free connections, this union elbow is your trusted choice for efficient pipe fitting.

AS ONE Pipe Fitting Union Straight, 1-516-02

Ships within 19 days

AS ONE Pipe Fitting Union Straight, 1-516-02

By AS ONE

Pack of 1 piece

₹518

The AS ONE Pipe Fitting Union Straight Union Straight, 1-516-02, your reliable and efficient solution for seamless pipe connections. This union straight fitting is meticulously designed and engineered to provide leak-free and hassle-free pipe fitting in various applications.The AS ONE Pipe Fitting Union Straight Union Straight, 1-516-02 simplifies the process of connecting pipes, whether for liquid transport, gas distribution, or pneumatic systems. Its one-touch design allows for quick and secure connections without the need for complex tools or extensive training. Simply push the pipe into the fitting, and you're ready to go.What sets this union straight fitting apart is its reliability and ease of use. It features a secure locking mechanism that ensures a leak-free connection, preventing costly fluid or gas leaks. Additionally, it is designed for durability, with materials that can withstand a wide range of pressures and temperatures.Quality and dependability are core principles at AS ONE, and the One-Touch Pipe Fitting Union Straight embodies that commitment. It is constructed using high-quality materials and precise engineering, ensuring both its longevity and performance.Upgrade your pipe connection experience with the AS ONE Pipe Fitting Union Straight Union Straight, 1-516-02, where simplicity meets reliability and quality. Whether you're in plumbing, industrial piping, or any application requiring secure and leak-free connections, this union straight fitting is your trusted choice for efficient pipe fitting.

Kobmax KX-PUC Push In Fitting Equal Union 6 mm Size (Pack of 100)

Ships within 4 days

Kobmax KX-PUC Push In Fitting Equal Union 6 mm Size (Pack of 100)

By Kobmax

Pack of 100 piece

₹671 ~~₹1,121~~

You save ₹450!

40.14% OFF

Kobmax KX-PUC Push In Fitting Equal Union 6 mm Size (Pack of 100) is intended for connecting two compatible 6 mm pneumatic tubes in a straight line. The equal union configuration supports consistent tube sizing at both connection points and can be used in suitable industrial pneumatic circuits, automation equipment, and compressed-air installations. Its push-in style is designed to simplify tubing connections during assembly and routine maintenance when installed according to the manufacturer's instructions. The 6 mm size helps identify the correct tube dimension, while the pack of 100 supports bulk purchasing for workshops and maintenance operations. Verify pressure ratings and tube compatibility before installation. For applications requiring a connection between two matching 6 mm air tubes, Kobmax KX-PUC Push In Fitting Equal Union 6 mm Size (Pack of 100) provides a practical fitting option. Its straight union design allows compatible tubing to be joined without changing the nominal tube size between ends. The push-in connection format can make assembly more convenient in suitable pneumatic systems. Before fitting, ensure the tubing is clean, correctly cut, and securely inserted. Check the operating conditions against the manufacturer's specifications, and inspect the assembled connection for leakage or looseness before putting the system into service.

Kobmax KX-PZA Push In Fitting Union Cross 6 mm Size (Pack of 100)

Ships within 4 days

Kobmax KX-PZA Push In Fitting Union Cross 6 mm Size (Pack of 100)

By Kobmax

Pack of 100 piece

₹2,005 ~~₹3,186~~

You save ₹1,181!

37.07% OFF

Kobmax KX-PZA Push In Fitting Union Cross 6 mm Size (Pack of 100) is designed to connect four compatible 6 mm pneumatic tubes through a cross-shaped connection. Its union cross configuration provides four connection points for suitable pneumatic line arrangements where tubing needs to connect in multiple directions. This fitting can be considered for compatible industrial equipment, automation systems, and compressed-air circuits. The push-in connection design is intended to support convenient tubing installation and servicing when used with compatible tubes and installed according to the manufacturer's instructions. The 6 mm size identifies the required tube dimension, while the pack of 100 supports bulk procurement and maintenance inventory. Verify operating pressure and tube compatibility before installation. For pneumatic installations requiring a four-way tube connection, Kobmax KX-PZA Push In Fitting Union Cross 6 mm Size (Pack of 100) offers a practical cross fitting option. Its four-port arrangement allows compatible 6 mm tubing to connect within a suitable pneumatic layout. The push-in style can simplify assembly and maintenance when the correct tubing is used and fitted properly. Before applying pressure, ensure that all tube ends are cleanly cut and fully inserted into their respective ports. Review the manufacturer's specifications for pressure limits, material compatibility, and installation guidance, then inspect each connection for leakage before putting the system into operation.

Kobmax KX-PUC Push In Fitting Equal Union 4 mm Size (Pack of 100)

Ships within 4 days

Kobmax KX-PUC Push In Fitting Equal Union 4 mm Size (Pack of 100)

By Kobmax

Pack of 100 piece

₹742 ~~₹1,239~~

You save ₹497!

40.11% OFF

Kobmax KX-PUC Push In Fitting Equal Union 4 mm Size (Pack of 100) is designed to connect two compatible 4 mm pneumatic tubes in a straight line. This equal union fitting provides a practical connection solution for pneumatic circuits used in industrial equipment, automation systems, and general air line installations. Its push-in connection design supports convenient tube insertion and removal during assembly and maintenance, when performed according to the manufacturer's instructions. The 4 mm size helps identify the required tube compatibility, while the pack of 100 is suitable for workshops, maintenance teams, and bulk purchasing requirements. Confirm operating pressure, tube compatibility, and material specifications before installation. For pneumatic tube connection tasks, Kobmax KX-PUC Push In Fitting Equal Union 4 mm Size (Pack of 100) offers a straightforward way to join two matching tubes. The equal union configuration maintains the same connection size on both sides, making it useful when extending or reconnecting compatible air lines. Its push-in style can help simplify installation in suitable pneumatic applications without requiring a complex connection arrangement. Before use, ensure the tubing is cut cleanly and inserted securely, and verify that the fitting meets the system's operating conditions. Follow the manufacturer's recommendations for installation, inspection, and maintenance.

Kobmax KX-PUC Push In Fitting Equal Union 8 mm Size (Pack of 100)

Ships within 4 days

Kobmax KX-PUC Push In Fitting Equal Union 8 mm Size (Pack of 100)

By Kobmax

Pack of 100 piece

₹671 ~~₹1,121~~

You save ₹450!

40.14% OFF

Kobmax KX-PUC Push In Fitting Equal Union 8 mm Size (Pack of 100) is designed to join two compatible 8 mm pneumatic tubes in a straight-line connection. This equal union fitting is suitable for consideration in pneumatic circuits, industrial machinery, automation equipment, and compressed-air line assemblies where matching tube dimensions are required. Its push-in connection style is intended to support convenient tube installation and removal in accordance with the manufacturer's instructions. The 8 mm size helps identify the intended tubing dimension, while the pack of 100 can support inventory needs for maintenance teams and industrial workshops. Verify tube type and pressure compatibility before use. For joining two matching 8 mm pneumatic tubes, Kobmax KX-PUC Push In Fitting Equal Union 8 mm Size (Pack of 100) provides a practical straight union option. The same-size connections at both ends help maintain a consistent tube dimension through the joint. Its push-in format is designed to simplify assembly in compatible pneumatic installations and maintenance tasks. Ensure the tubing is correctly prepared and inserted securely before applying pressure. Review the manufacturer's specifications for operating limits and compatible tube materials, and inspect the completed connection for leaks or movement as part of routine system checks.

Kobmax KX-PG Push In Fitting Unequal Union 12-10 Size (Pack of 100)

Ships within 4 days

Kobmax KX-PG Push In Fitting Unequal Union 12-10 Size (Pack of 100)

By Kobmax

Pack of 100 piece

₹1,415 ~~₹2,336~~

You save ₹921!

39.44% OFF

Kobmax KX-PG Push In Fitting Unequal Union 12-10 Size (Pack of 100) is designed to join two compatible pneumatic tubes of different outside diameters within a compressed air system. Its unequal union configuration provides a convenient connection between tubing lines, supporting pneumatic equipment assembly, maintenance, and servicing. The 12-10 size designation identifies the specified tube-size combination and should be checked against the manufacturer's technical documentation before ordering. Supplied in a pack of 100, these fittings are useful for industrial applications, workshop maintenance, production equipment, and installations requiring multiple tube connections. Before selecting the fitting, verify both tube outside diameters, tubing material compatibility, working pressure, and temperature limits. Correct sizing helps support secure installation and dependable operation in suitable pneumatic systems. Kobmax KX-PG Push In Fitting Unequal Union 12-10 Size (Pack of 100) supports pneumatic assemblies where two different tube sizes must be connected. Prepare both tube ends with clean, square cuts and check that the surfaces are free from damage. Insert each tube fully into its designated push-in port, following the manufacturer's instructions. Ensure both tubes are properly seated and avoid applying excessive bending or pulling force to the assembled connection. Before operating the equipment, inspect the fitting for air leakage and confirm that both tubes remain secure. The pack of 100 is suitable for bulk installation, maintenance work, and replacement inventory. Confirm tube dimensions, pressure limits, and operating temperature requirements before use to help maintain safe and reliable performance in the intended pneumatic circuit.

Kobmax KX-PG Push In Fitting Unequal Union 12-8 Size (Pack of 100)

Ships within 4 days

Kobmax KX-PG Push In Fitting Unequal Union 12-8 Size (Pack of 100)

By Kobmax

Pack of 100 piece

₹1,415 ~~₹2,336~~

You save ₹921!

39.44% OFF

Kobmax KX-PG Push In Fitting Unequal Union 12-8 Size (Pack of 100) is intended to join compatible pneumatic tubes with different outside diameters in compressed air installations. The unequal union design creates a practical connection between tubing lines and supports pneumatic equipment assembly, maintenance, and servicing. The 12-8 size designation identifies the specified tube-size combination and should be confirmed against the manufacturer's technical information before ordering. Supplied in a pack of 100, these fittings are suitable for industrial workshops, production equipment, pneumatic machinery, and applications requiring multiple connections. To ensure a suitable fit, verify both tube dimensions, tubing material, operating pressure, and temperature limits. Correct component selection helps support secure connections and reliable operation in compatible pneumatic systems. Kobmax KX-PG Push In Fitting Unequal Union 12-8 Size (Pack of 100) can be used where two compatible pneumatic tubes of different sizes need to be connected. Before installation, check that both tube ends are clean, undamaged, and cut squarely. Insert each tube fully into its corresponding push-in port, following the manufacturer's guidance. Ensure the tubing is seated correctly and avoid twisting or pulling the tubes after assembly. Inspect both connection points for leakage and confirm secure tube retention before operating the compressed air system. The pack of 100 supports planned installations, equipment maintenance, and replacement stock requirements. Always verify tube outside diameters, pressure ratings, and operating temperature limits before use to help ensure suitability and dependable performance in the intended application.

Kobmax KX-PG Push In Fitting Unequal Union 12-6 Size (Pack of 100)

Ships within 4 days

Kobmax KX-PG Push In Fitting Unequal Union 12-6 Size (Pack of 100)

By Kobmax

Pack of 100 piece

₹1,651 ~~₹2,596~~

You save ₹945!

36.4% OFF

Kobmax KX-PG Push In Fitting Unequal Union 12-6 Size (Pack of 100) is designed to connect two compatible pneumatic tubes with different outside diameters. Its unequal union configuration provides a convenient joining point for tubing lines in compressed air systems, helping simplify equipment assembly and maintenance. The 12-6 size designation identifies the specified tube-size combination and should be verified against the manufacturer's product documentation before use. Supplied in a pack of 100, these fittings are useful for industrial applications, pneumatic equipment servicing, workshop installations, and bulk maintenance requirements. Before purchase, check the dimensions of both tubes, tubing material compatibility, pressure rating, and temperature limits. Selecting a correctly sized fitting helps support secure connections and dependable operation in compatible pneumatic circuits. Kobmax KX-PG Push In Fitting Unequal Union 12-6 Size (Pack of 100) supports pneumatic systems that require joining two different tube sizes. Prepare both tube ends with clean, square cuts and ensure they are free from damage or contamination. Insert each tube fully into its corresponding push-in port according to the manufacturer's installation instructions. Check that both tubes are seated properly and avoid placing excessive force on the connection. Before operating the equipment, verify tube retention and inspect both ports for air leakage. The pack of 100 is suitable for bulk installations, maintenance teams, and replacement inventory. Confirm the required tube diameters, operating pressure, and temperature limits before use. Following the manufacturer's specifications helps support safe installation and reliable performance in the intended pneumatic application.

Kobmax KX-PG Push In Fitting Unequal Union 10-8 Size (Pack of 100)

Ships within 4 days

Kobmax KX-PG Push In Fitting Unequal Union 10-8 Size (Pack of 100)

By Kobmax

Pack of 100 piece

₹1,132 ~~₹1,888~~

You save ₹756!

40.04% OFF

Kobmax KX-PG Push In Fitting Unequal Union 10-8 Size (Pack of 100) is intended for connecting two compatible pneumatic tubes with different outside diameters in compressed air systems. The unequal union design provides a practical joining point between tubing lines and can simplify assembly, servicing, and replacement work. Its 10-8 size designation identifies the specified tube-size combination, which should be checked against the manufacturer's specifications before ordering. Supplied in a pack of 100, these fittings are suitable for industrial workshops, pneumatic machinery, maintenance operations, and installations requiring multiple connections. Before selecting the fitting, confirm both tube outside diameters, tubing material compatibility, operating pressure, and temperature limits. Matching the fitting to the system's requirements helps support secure connections and dependable use in compatible pneumatic applications. Kobmax KX-PG Push In Fitting Unequal Union 10-8 Size (Pack of 100) can be used to connect two compatible pneumatic tubes of different sizes. Ensure both tube ends are clean, undamaged, and cut squarely before installation. Insert each tube fully into its designated push-in port, following the manufacturer's instructions for proper seating. Avoid excessive bending, pulling, or twisting that may stress the connection. After assembly, check the retention of both tubes and inspect the fitting for air leakage before putting the system into operation. The pack of 100 supports bulk installation projects, routine maintenance, and replacement stock management. Verify the exact tube dimensions, working pressure, and operating temperature requirements before use. Correct installation and regular inspection help maintain reliable connections in suitable compressed air circuits.

Kobmax KX-PG Push In Fitting Unequal Union 10-6 Size (Pack of 100)

Ships within 4 days

Kobmax KX-PG Push In Fitting Unequal Union 10-6 Size (Pack of 100)

By Kobmax

Pack of 100 piece

₹1,108 ~~₹1,864~~

You save ₹756!

40.57% OFF

Kobmax KX-PG Push In Fitting Unequal Union 10-6 Size (Pack of 100) is designed to join two compatible pneumatic tubes with different specified outside diameters. Its unequal union configuration helps create a connection between tubing lines in compressed air circuits, supporting equipment assembly and maintenance. The 10-6 size designation identifies the model's tube-size combination, which should be confirmed using the manufacturer's technical documentation before selection. Supplied in a pack of 100, these fittings are useful for industrial maintenance, pneumatic machinery, workshop installations, and production environments where multiple connections are needed. To ensure compatibility, verify both tube diameters, tubing material, working pressure, and operating temperature. Correct fitting selection helps support secure tube connections and dependable operation in suitable pneumatic systems. Kobmax KX-PG Push In Fitting Unequal Union 10-6 Size (Pack of 100) supports pneumatic installations requiring a connection between two different tube sizes. Before fitting, inspect both tubes and cut their ends cleanly and squarely. Insert each tube fully into its corresponding push-in port according to the manufacturer's instructions. Make sure the tubes are correctly seated and avoid twisting or pulling them during installation. Once assembled, check that both tubes are held securely and inspect the connection points for air leakage before operating the system. The pack of 100 is suitable for maintenance inventory, workshop use, and multi-point pneumatic installations. Confirm the specified tube dimensions, pressure limits, and temperature requirements before use to help maintain reliable performance under the intended operating conditions.

Kobmax KX-PG Push In Fitting Unequal Union 8-6 Size (Pack of 100)

Ships within 4 days

Kobmax KX-PG Push In Fitting Unequal Union 8-6 Size (Pack of 100)

By Kobmax

Pack of 100 piece

₹813 ~~₹1,357~~

You save ₹544!

40.09% OFF

Kobmax KX-PG Push In Fitting Unequal Union 8-6 Size (Pack of 100) is intended for joining two compatible pneumatic tubes of different sizes within compressed air systems. Its unequal union design provides a convenient way to connect tubing lines, supporting pneumatic equipment assembly, servicing, and routine maintenance. The 8-6 size designation represents the specified tube-size combination and should be verified against the manufacturer's product specifications to ensure correct selection. Supplied in a pack of 100, these fittings are suitable for industrial workshops, pneumatic machinery, production equipment, and applications requiring multiple tube connections. Before purchase, check the outside diameters of both tubes, material compatibility, working pressure, and temperature limits. Choosing the correct fitting helps support proper installation and dependable performance in compatible pneumatic applications. Kobmax KX-PG Push In Fitting Unequal Union 8-6 Size (Pack of 100) can be used where two compatible pneumatic tubes with different outside diameters must be connected. Prepare both tubes with clean, square cuts and ensure their surfaces are free from damage that could affect sealing. Push each tube fully into its designated port, following the manufacturer's installation instructions. Ensure the tubing is correctly seated and avoid applying unnecessary side loads to the assembled connection. Before placing the pneumatic system into service, inspect both ends for leakage and confirm that the tubes remain securely held. The pack of 100 supports bulk installation, equipment servicing, and maintenance stock requirements. Always verify tube dimensions, pressure ratings, and operating temperature limits before use to help ensure suitability for the intended application.

Kobmax KX-PG Push In Fitting Unequal Union 8-4 Size (Pack of 100)

Ships within 4 days

Kobmax KX-PG Push In Fitting Unequal Union 8-4 Size (Pack of 100)

By Kobmax

Pack of 100 piece

₹1,025 ~~₹1,711~~

You save ₹686!

40.09% OFF

Kobmax KX-PG Push In Fitting Unequal Union 8-4 Size (Pack of 100) is designed to connect two compatible pneumatic tubes with different outside diameters in compressed air systems. Its unequal union configuration provides a practical connection between tubing lines, helping simplify pneumatic circuit assembly, equipment installation, and maintenance. The 8-4 size designation identifies the specified tube-size combination and should be checked against the manufacturer's technical documentation before ordering. Supplied in a pack of 100, these fittings are suitable for industrial applications, pneumatic machinery, workshop maintenance, and installations requiring multiple tube connections. Before selecting the product, verify both tube dimensions, tubing material compatibility, operating pressure, and temperature limits. Correct sizing and suitable application selection help support secure connections and dependable operation in compatible pneumatic systems. Kobmax KX-PG Push In Fitting Unequal Union 8-4 Size (Pack of 100) supports pneumatic installations where two different tube sizes need to be joined. Before installation, ensure both tube ends are clean, undamaged, and cut squarely. Insert each tube fully into its corresponding push-in port according to the manufacturer's instructions. Avoid excessive bending, twisting, or pulling that could place unnecessary stress on the connection. After assembly, check tube retention and inspect both connection points for air leakage before operating the equipment. The pack of 100 is useful for maintenance departments, bulk installations, and replacement inventory. Confirm the specified tube outside diameters, pressure ratings, and operating temperature requirements before use. Following the manufacturer's installation guidance helps maintain reliable connections in suitable compressed air circuits.

Kobmax KX-PG Push In Fitting Unequal Union 6-4 Size (Pack of 100)

Ships within 4 days

Kobmax KX-PG Push In Fitting Unequal Union 6-4 Size (Pack of 100)

By Kobmax

Pack of 100 piece

₹884 ~~₹1,475~~

You save ₹591!

40.07% OFF

Kobmax KX-PG Push In Fitting Unequal Union 6-4 Size (Pack of 100) is designed to join two compatible pneumatic tubes of different specified sizes within a compressed air system. Its unequal union configuration provides a convenient connection between tubing lines, helping simplify pneumatic circuit assembly and maintenance. The 6-4 size designation identifies the model's specified tube-size combination, which should be verified against the manufacturer's product documentation before ordering. Supplied in a pack of 100, these fittings are suitable for industrial maintenance teams, workshop applications, pneumatic equipment assembly, and installations requiring multiple tube connections. Confirm the compatible tube outside diameters, material requirements, pressure rating, and temperature limits to ensure the fitting suits the intended application. Correct component selection helps support reliable connections in suitable pneumatic systems. Kobmax KX-PG Push In Fitting Unequal Union 6-4 Size (Pack of 100) can be used where two compatible pneumatic tubes with different sizes need to be connected. Before installation, check the specified tube dimensions and ensure both tubing ends are clean, undamaged, and cut squarely. Insert each tube fully into its respective push-in port, following the manufacturer's installation instructions. Avoid twisting, pulling, or applying excessive force that could affect the connection. After fitting, check tube retention and inspect both connection points for air leakage before operating the pneumatic system. The pack of 100 supports bulk installation, maintenance, and replacement stock requirements. Verify tubing compatibility, pressure limits, and operating temperature before use. Always follow the manufacturer's technical guidance to help achieve a secure connection and dependable operation in the intended pneumatic circuit.

Panacea Technology 10 mm Dia Union Straight Push Fitting, PU10

Ships within 5 days

Panacea Technology Union Straight Push Fitting Round Thermoplastic Polymer & Brass Material (Diameter 4 to 16 mm)

By Panacea Technology

₹25 - ₹112

You save ₹1!

1.94% OFF

Panacea Technology Union Straight Push Fitting Round Thermoplastic Polymer & Brass Material is a practical component designed for pneumatic air-line connections where a straight union arrangement is required. Listed under the Pneumatic Fittings category, this fitting provides a direct joining point between compatible pneumatic tubes while maintaining a compact round profile. Its thermoplastic polymer and brass construction combines a lightweight outer body with a metal connection component, making it suitable for use in organised pneumatic assemblies. The union-style configuration allows two tube sections to be connected in a straight path, helping maintain a neat routing layout within equipment and systems.The Panacea Technology Union Straight Push Fitting Round Thermoplastic Polymer & Brass Material is suited to applications involving pneumatic tubing in machinery, automation setups, control systems, and general air circuits. Its push-fitting design supports straightforward tube insertion and removal during installation or maintenance, while the union configuration provides a convenient connection between separate tubing lengths. The round form factor helps accommodate the fitting within compact assembly spaces. With its clearly defined connection purpose and combination of thermoplastic polymer and brass materials, this Panacea Technology pneumatic fitting can be selected for tube joining requirements where a straight, space-conscious connection is needed.

Shape : Round

Material : Thermoplastic Polymer & Brass

Type of Product : Union Straight Push Fitting

Color : Black

Janatics Union Multi Distributor Fitting Male 10 mm, WD211100652

Ships within 15 days

Janatics Union Multi Distributor Fitting Male 10 mm

By Janatics

₹530 - ₹542

Janatics Union Multi Distributor Fitting Male is a vital component in pneumatic systems, meticulously engineered to ensure seamless connectivity and optimal performance. Crafted with precision and durability in mind, this fitting serves as the cornerstone for efficient air distribution in various industrial applications. Designed to withstand rigorous conditions, the Janatics Union Multi Distributor Fitting Male is constructed from high-quality materials such as brass or stainless steel, guaranteeing longevity and resistance to corrosion. Its robust build ensures reliability even in demanding environments, offering peace of mind to operators and engineers alike. Featuring a male-threaded connection, this fitting effortlessly integrates into pneumatic circuits, facilitating the smooth transfer of compressed air or gases. Its versatile design enables easy installation and compatibility with a wide range of pneumatic components, including valves, cylinders, and actuators.

Thread Type : BSP

Tube Outer Diameter D1 : 10 mm

Design Type : Standard

Usage/Application : Pneumatic Fitting , Push In Fitting , Push Fitting

Tube Outer Diameter D2 : 6 mm

Janatics Union Multi Distributor Fitting Male 8 mm, WD211080652

Ships within 15 days

Janatics Union Multi Distributor Fitting Male 8 mm

By Janatics

₹412 - ₹471

Thread Type : BSP

Tube Outer Diameter D1 : 8 mm

Design Type : Standard

Usage/Application : Pneumatic Fitting , Push In Fitting , Push Fitting

Janatics Union Multi Distributor Fitting Male 6 mm, WD211060452

Ships within 15 days

Janatics Union Multi Distributor Fitting Male 6 mm

By Janatics

₹376 - ₹494

Thread Type : BSP

Tube Outer Diameter D1 : 6 mm

Design Type : Standard

Usage/Application : Pneumatic Fitting , Push In Fitting , Push Fitting

Tube Outer Diameter D2 : 4 mm

Panacea Technology 10 mm Dia Union Tee Push Fitting, PE010

Ships within 14 days

Panacea Technology Union Tee Push Fitting T Shape Thermoplastic Polymer & Brass Material (Diameter 4 to 16 mm)

By Panacea Technology

₹35 - ₹199

You save ₹1!

1.25% OFF

Panacea Technology Union Tee Push Fitting T Shape Thermoplastic Polymer & Brass Material is a three-way pneumatic connection component designed for branching air tubing into different directions. Falling under the Pneumatic Fittings category, its T-shaped configuration provides one inlet and two outlet paths for creating a branched pneumatic circuit. The fitting combines thermoplastic polymer with brass material, offering a functional construction for use with compatible pneumatic tubes. Its push-type connection format allows tubing to be positioned directly into the fitting, making it suitable for pneumatic assemblies where multiple lines need to be arranged from a common connection point. The compact profile also supports orderly tube routing within equipment and installation areas.Panacea Technology Union Tee Push Fitting T Shape Thermoplastic Polymer & Brass Material can be used in pneumatic machinery, automation equipment, air-control arrangements, and other systems requiring a three-way tube connection. The T-shaped design helps divide or redirect an air line without requiring separate fittings for each branch. Its combination of polymer and brass components provides a practical solution for organised pneumatic layouts. This Panacea Technology fitting is particularly relevant where tubing needs to be connected in a branching pattern while keeping the assembly compact and clearly arranged.

Shape : T Shape

Material : Thermoplastic Polymer & Brass

Type of Product : Union Tee Push Fitting

Color : Black

Panacea Technology 10 mm Dia Union Elbow Push Fitting, PV10

Ships within 14 days

Panacea Technology Union Elbow Push Fitting L Shape Thermoplastic Polymer & Brass Material (Diameter 4 to 16 mm)

By Panacea Technology

₹25 - ₹112

Panacea Technology Union Elbow Push Fitting L Shape Thermoplastic Polymer & Brass Material is a practical pneumatic fitting designed to connect tubing sections while providing a convenient change in direction. Its L-shaped union elbow configuration supports a 90-degree routing arrangement, making it suitable for pneumatic assemblies where tubing needs to be redirected within a compact layout. The fitting combines thermoplastic polymer with brass material, providing a balanced construction for use in compatible compressed-air connections. As a part of the Pneumatic Fittings category, it can be incorporated into air lines, control circuits, and equipment assemblies that require organized tube routing.The Panacea Technology Union Elbow Push Fitting L Shape Thermoplastic Polymer & Brass Material features a push-fit connection style that helps simplify tubing installation and removal during assembly or maintenance. Its union design allows tubing to be connected from both ends, while the elbow profile helps manage directional changes without requiring an additional angled tube arrangement. The combination of polymer and brass components makes this fitting suitable for pneumatic setups requiring a compact connection point. It can be used in machinery, automation systems, pneumatic panels, and other compatible air-line applications where efficient tubing orientation is required.

Shape : L Shape

Material : Thermoplastic Polymer & Brass

Type of Product : Union Elbow Push Fitting

Color : Black

PISCO 1.3 Φmm Orifice Dia -100 kPa Stainless Steel Tightening Fitting Union Tee, NSE0420

Ships within 19 days

PISCO 1.3 Φmm Orifice Dia -100 kPa Stainless Steel Tightening Fitting Union Tee, NSE0420

By PISCO

₹4,483

Introducing the PISCO 1.3 Φmm Orifice Dia -100 kPa Stainless Steel Tightening Fitting Union Tee, NSE0420, an advanced solution engineered to enhance fluid control systems in diverse industrial applications. Meticulously crafted with precision engineering and durability in mind, this fitting exemplifies PISCO's commitment to delivering top-tier solutions that seamlessly integrate into complex systems. Constructed from premium stainless steel, the PISCO Tightening Fitting Union Tee ensures robust durability and resilience, making it an ideal choice for environments where exposure to corrosive elements is a concern. The union tee configuration adds an extra layer of versatility to fluid systems, facilitating efficient branching and connectivity in multiple directions. This adaptability makes it an excellent choice for applications requiring precise control and distribution of fluids in pneumatic and hydraulic setups, ensuring optimal performance and reliability. With a unique -100 kPa pressure rating, this fitting is precisely engineered for low-pressure fluid systems, providing a secure and efficient solution for pneumatic and hydraulic setups. PISCO places a strong emphasis on performance and reliability, subjecting each Stainless Steel Tightening Fitting Union Tee to rigorous testing to meet or exceed industry standards. This commitment to quality ensures that the fitting consistently delivers secure connections and dependable performance, instilling confidence in critical industrial processes. Installation is streamlined with precisely machined threads, enabling a secure and leak-free connection. The polished finish not only adds an aesthetic touch but also reinforces the fitting's resistance to corrosion, contributing to an extended service life. Elevate your fluid control systems with confidence — choose the PISCO 1.3 Φmm Orifice Dia -100 kPa Stainless Steel Tightening Fitting Union Tee, NSE0420 for an exceptional blend of durability, adaptability, and precision engineering. Trust PISCO to provide a fitting that exceeds industry expectations, ensuring reliability and longevity in challenging industrial environments.

PISCO 7.5 Φmm Orifice Dia -100 kPa Stainless Steel Tightening Fitting Union Tee, NSE1290

Ships within 19 days

PISCO 7.5 Φmm Orifice Dia -100 kPa Stainless Steel Tightening Fitting Union Tee, NSE1290

By PISCO

₹7,079

Introducing the PISCO 7.5 Φmm Orifice Dia -100 kPa Stainless Steel Tightening Fitting Union Tee, NSE1290, an advanced solution engineered to enhance fluid control systems in diverse industrial applications. Meticulously crafted with precision engineering and durability in mind, this fitting exemplifies PISCO's commitment to delivering top-tier solutions that seamlessly integrate into complex systems. Constructed from premium stainless steel, the PISCO Tightening Fitting Union Tee ensures robust durability and resilience, making it an ideal choice for environments where exposure to corrosive elements is a concern. The union tee configuration adds an extra layer of versatility to fluid systems, facilitating efficient branching and connectivity in multiple directions. This adaptability makes it an excellent choice for applications requiring precise control and distribution of fluids in pneumatic and hydraulic setups, ensuring optimal performance and reliability. With a unique -100 kPa pressure rating, this fitting is precisely engineered for low-pressure fluid systems, providing a secure and efficient solution for pneumatic and hydraulic setups. PISCO places a strong emphasis on performance and reliability, subjecting each Stainless Steel Tightening Fitting Union Tee to rigorous testing to meet or exceed industry standards. This commitment to quality ensures that the fitting consistently delivers secure connections and dependable performance, instilling confidence in critical industrial processes. Installation is streamlined with precisely machined threads, enabling a secure and leak-free connection. The polished finish not only adds an aesthetic touch but also reinforces the fitting's resistance to corrosion, contributing to an extended service life. Elevate your fluid control systems with confidence — choose the PISCO 7.5 Φmm Orifice Dia -100 kPa Stainless Steel Tightening Fitting Union Tee, NSE1290 for an exceptional blend of durability, adaptability, and precision engineering. Trust PISCO to provide a fitting that exceeds industry expectations, ensuring reliability and longevity in challenging industrial environments.

PISCO 6 Φmm Orifice Dia -100 kPa Stainless Steel Tightening Fitting Union Tee, NSE1075

Ships within 19 days

PISCO 6 Φmm Orifice Dia -100 kPa Stainless Steel Tightening Fitting Union Tee, NSE1075

By PISCO

₹6,371

Introducing the PISCO 6 Φmm Orifice Dia -100 kPa Stainless Steel Tightening Fitting Union Tee, NSE1075, an advanced solution engineered to enhance fluid control systems in diverse industrial applications. Meticulously crafted with precision engineering and durability in mind, this fitting exemplifies PISCO's commitment to delivering top-tier solutions that seamlessly integrate into complex systems. Constructed from premium stainless steel, the PISCO Tightening Fitting Union Tee ensures robust durability and resilience, making it an ideal choice for environments where exposure to corrosive elements is a concern. The union tee configuration adds an extra layer of versatility to fluid systems, facilitating efficient branching and connectivity in multiple directions. This adaptability makes it an excellent choice for applications requiring precise control and distribution of fluids in pneumatic and hydraulic setups, ensuring optimal performance and reliability. With a unique -100 kPa pressure rating, this fitting is precisely engineered for low-pressure fluid systems, providing a secure and efficient solution for pneumatic and hydraulic setups. PISCO places a strong emphasis on performance and reliability, subjecting each Stainless Steel Tightening Fitting Union Tee to rigorous testing to meet or exceed industry standards. This commitment to quality ensures that the fitting consistently delivers secure connections and dependable performance, instilling confidence in critical industrial processes. Installation is streamlined with precisely machined threads, enabling a secure and leak-free connection. The polished finish not only adds an aesthetic touch but also reinforces the fitting's resistance to corrosion, contributing to an extended service life. Elevate your fluid control systems with confidence — choose the PISCO 6 Φmm Orifice Dia -100 kPa Stainless Steel Tightening Fitting Union Tee, NSE1075 for an exceptional blend of durability, adaptability, and precision engineering. Trust PISCO to provide a fitting that exceeds industry expectations, ensuring reliability and longevity in challenging industrial environments.

PISCO 1.4 Φmm Orifice Dia -100 kPa Stainless Steel Tightening Fitting Union Tee, NSE0425

Ships within 19 days

PISCO 1.4 Φmm Orifice Dia -100 kPa Stainless Steel Tightening Fitting Union Tee, NSE0425

By PISCO

₹4,129

Introducing the PISCO 1.4 Φmm Orifice Dia -100 kPa Stainless Steel Tightening Fitting Union Tee, NSE0425, an advanced solution engineered to enhance fluid control systems in diverse industrial applications. Meticulously crafted with precision engineering and durability in mind, this fitting exemplifies PISCO's commitment to delivering top-tier solutions that seamlessly integrate into complex systems. Constructed from premium stainless steel, the PISCO Tightening Fitting Union Tee ensures robust durability and resilience, making it an ideal choice for environments where exposure to corrosive elements is a concern. The union tee configuration adds an extra layer of versatility to fluid systems, facilitating efficient branching and connectivity in multiple directions. This adaptability makes it an excellent choice for applications requiring precise control and distribution of fluids in pneumatic and hydraulic setups, ensuring optimal performance and reliability. With a unique -100 kPa pressure rating, this fitting is precisely engineered for low-pressure fluid systems, providing a secure and efficient solution for pneumatic and hydraulic setups. PISCO places a strong emphasis on performance and reliability, subjecting each Stainless Steel Tightening Fitting Union Tee to rigorous testing to meet or exceed industry standards. This commitment to quality ensures that the fitting consistently delivers secure connections and dependable performance, instilling confidence in critical industrial processes. Installation is streamlined with precisely machined threads, enabling a secure and leak-free connection. The polished finish not only adds an aesthetic touch but also reinforces the fitting's resistance to corrosion, contributing to an extended service life. Elevate your fluid control systems with confidence — choose the PISCO 1.4 Φmm Orifice Dia -100 kPa Stainless Steel Tightening Fitting Union Tee, NSE0425 for an exceptional blend of durability, adaptability, and precision engineering. Trust PISCO to provide a fitting that exceeds industry expectations, ensuring reliability and longevity in challenging industrial environments.

PISCO 11.5 Φmm Orifice Dia -100 kPa Stainless Steel Tightening Fitting Union Tee, NSE1613

Ships within 19 days

PISCO 11.5 Φmm Orifice Dia -100 kPa Stainless Steel Tightening Fitting Union Tee, NSE1613

By PISCO

₹8,259

Introducing the PISCO 11.5 Φmm Orifice Dia -100 kPa Stainless Steel Tightening Fitting Union Tee, NSE1613, an advanced solution engineered to enhance fluid control systems in diverse industrial applications. Meticulously crafted with precision engineering and durability in mind, this fitting exemplifies PISCO's commitment to delivering top-tier solutions that seamlessly integrate into complex systems. Constructed from premium stainless steel, the PISCO Tightening Fitting Union Tee ensures robust durability and resilience, making it an ideal choice for environments where exposure to corrosive elements is a concern. The union tee configuration adds an extra layer of versatility to fluid systems, facilitating efficient branching and connectivity in multiple directions. This adaptability makes it an excellent choice for applications requiring precise control and distribution of fluids in pneumatic and hydraulic setups, ensuring optimal performance and reliability. With a unique -100 kPa pressure rating, this fitting is precisely engineered for low-pressure fluid systems, providing a secure and efficient solution for pneumatic and hydraulic setups. PISCO places a strong emphasis on performance and reliability, subjecting each Stainless Steel Tightening Fitting Union Tee to rigorous testing to meet or exceed industry standards. This commitment to quality ensures that the fitting consistently delivers secure connections and dependable performance, instilling confidence in critical industrial processes. Installation is streamlined with precisely machined threads, enabling a secure and leak-free connection. The polished finish not only adds an aesthetic touch but also reinforces the fitting's resistance to corrosion, contributing to an extended service life. Elevate your fluid control systems with confidence — choose the PISCO 11.5 Φmm Orifice Dia -100 kPa Stainless Steel Tightening Fitting Union Tee, NSE1613 for an exceptional blend of durability, adaptability, and precision engineering. Trust PISCO to provide a fitting that exceeds industry expectations, ensuring reliability and longevity in challenging industrial environments.

PISCO 8.5 Φmm Orifice Dia -100 kPa Stainless Steel Tightening Fitting Union Tee, NSE1210

Ships within 19 days

PISCO 8.5 Φmm Orifice Dia -100 kPa Stainless Steel Tightening Fitting Union Tee, NSE1210

By PISCO

₹8,023

Introducing the PISCO 8.5 Φmm Orifice Dia -100 kPa Stainless Steel Tightening Fitting Union Tee, NSE1210, an advanced solution engineered to enhance fluid control systems in diverse industrial applications. Meticulously crafted with precision engineering and durability in mind, this fitting exemplifies PISCO's commitment to delivering top-tier solutions that seamlessly integrate into complex systems. Constructed from premium stainless steel, the PISCO Tightening Fitting Union Tee ensures robust durability and resilience, making it an ideal choice for environments where exposure to corrosive elements is a concern. The union tee configuration adds an extra layer of versatility to fluid systems, facilitating efficient branching and connectivity in multiple directions. This adaptability makes it an excellent choice for applications requiring precise control and distribution of fluids in pneumatic and hydraulic setups, ensuring optimal performance and reliability. With a unique -100 kPa pressure rating, this fitting is precisely engineered for low-pressure fluid systems, providing a secure and efficient solution for pneumatic and hydraulic setups. PISCO places a strong emphasis on performance and reliability, subjecting each Stainless Steel Tightening Fitting Union Tee to rigorous testing to meet or exceed industry standards. This commitment to quality ensures that the fitting consistently delivers secure connections and dependable performance, instilling confidence in critical industrial processes. Installation is streamlined with precisely machined threads, enabling a secure and leak-free connection. The polished finish not only adds an aesthetic touch but also reinforces the fitting's resistance to corrosion, contributing to an extended service life. Elevate your fluid control systems with confidence — choose the PISCO 8.5 Φmm Orifice Dia -100 kPa Stainless Steel Tightening Fitting Union Tee, NSE1210 for an exceptional blend of durability, adaptability, and precision engineering. Trust PISCO to provide a fitting that exceeds industry expectations, ensuring reliability and longevity in challenging industrial environments.

PISCO 6.5 Φmm Orifice Dia -100 kPa Stainless Steel Tightening Fitting Union Tee, NSE1080

Ships within 19 days

PISCO 6.5 Φmm Orifice Dia -100 kPa Stainless Steel Tightening Fitting Union Tee, NSE1080

By PISCO

₹6,843

Introducing the PISCO 6.5 Φmm Orifice Dia -100 kPa Stainless Steel Tightening Fitting Union Tee, NSE1080, an advanced solution engineered to enhance fluid control systems in diverse industrial applications. Meticulously crafted with precision engineering and durability in mind, this fitting exemplifies PISCO's commitment to delivering top-tier solutions that seamlessly integrate into complex systems. Constructed from premium stainless steel, the PISCO Tightening Fitting Union Tee ensures robust durability and resilience, making it an ideal choice for environments where exposure to corrosive elements is a concern. The union tee configuration adds an extra layer of versatility to fluid systems, facilitating efficient branching and connectivity in multiple directions. This adaptability makes it an excellent choice for applications requiring precise control and distribution of fluids in pneumatic and hydraulic setups, ensuring optimal performance and reliability. With a unique -100 kPa pressure rating, this fitting is precisely engineered for low-pressure fluid systems, providing a secure and efficient solution for pneumatic and hydraulic setups. PISCO places a strong emphasis on performance and reliability, subjecting each Stainless Steel Tightening Fitting Union Tee to rigorous testing to meet or exceed industry standards. This commitment to quality ensures that the fitting consistently delivers secure connections and dependable performance, instilling confidence in critical industrial processes. Installation is streamlined with precisely machined threads, enabling a secure and leak-free connection. The polished finish not only adds an aesthetic touch but also reinforces the fitting's resistance to corrosion, contributing to an extended service life. Elevate your fluid control systems with confidence — choose the PISCO 6.5 Φmm Orifice Dia -100 kPa Stainless Steel Tightening Fitting Union Tee, NSE1080 for an exceptional blend of durability, adaptability, and precision engineering. Trust PISCO to provide a fitting that exceeds industry expectations, ensuring reliability and longevity in challenging industrial environments.

Page 1 of 34 results