Chat
Ships within 25 days
View
View
View
View
| Type of Product | Range Sensor |
| Model No | UST-30LCN |
| Material | Optical window: Polycarbonate, Body: Aluminum |
| Light Source | Semiconductor laser (wavelength 905nm) FDA Laser Safety Class 1 (IEC60825-1:2014) |
Type of Product |
Range Sensor |
Model No |
UST-30LCN |
Material |
Optical window: Polycarbonate, Body: Aluminum |
Light Source |
Semiconductor laser (wavelength 905nm) FDA Laser Safety Class 1 (IEC60825-1:2014) |
Response Time |
OFF/66msec to 3241msec, ON/66msec to 3241msec *The default setting is 66ms. The ON/OFF delay function can be switched from the application's function settings. When switching areas, there will be an additional delay of up to one scan. |
Monotaro ID |
58767725 |
Accuracy |
Distance measurement: ±40* *Distance accuracy is based on the reference reflector under the standard environment at the time of shipment. In a low temperature environment of -11°C or below, the detection distance is as follows: 90% reflectivity white Kent paper: 0.05m to 25m, 10% reflectivity black paper: 0.05m to 8m |
Mass (g) |
130 (excluding cable) |
Protection Class |
IP67* *The power cable and Ethernet cable ends (connector parts) do not have an IP67 protective structure. |
Country of Origin |
Japan |
Import Country |
Direct Import from Japan |
Interface |
Ethernet 100BASE-TX |
Output Type |
NPN type |
Power Consumption (W) |
3.6 or less (steady state) |
Resolution |
0.125 degrees |
Output |
5 outputs (photocoupler/open collector output DC30V 50mA MAX.) / Output 1: Output OFF when inside area is detected, Output 2: Output OFF when inside area is detected, Output 3: Output OFF when inside area is detected, Output 4: Fault output (output ON under normal conditions), Output 5: Synchronous output (Note) When a fault output is issued, outputs 1 to 3 will indicate the presence of an obstacle. |
Name of Manufacturer/Packer/Importer |
Hokuyo Electric Co., Ltd. |
Power Supply Voltage |
DC12/DC24 (operating voltage range 10 to 30, ripple within 10%) |
Current Consumption (mA) |
Typ. 150 or less (DC 24V) However, an inrush current of approximately 450 is required at startup. *Please use a power supply with sufficient current capacity. |
Function |
Synchronous operation mode (set by Area Designer), synchronous master (0°), synchronous slave (90°), synchronous slave (180°), synchronous slave (270°) *The factory setting is synchronous master. When using the synchronization function, refer to the synchronization wiring in Section 9 to make the connections, and set the synchronous slave from the application. |
Specifications |
Detection distance and detection object: [Guaranteed detection value] 0.05m to 30m* (white Kent paper with 90% reflectivity), 0.05m to 12m* (black paper with 10% reflectivity) *Distance accuracy is based on the reference reflector under the standard environment at the time of shipment. In low-temperature environments of -11°C or below, the detection distance is as follows: white Kent paper with 90% reflectivity: 0.05m to 25m, black paper with 10% reflectivity: 0.05m to 8m [Maximum detection distance] 60m (output limit value) [Minimum detectable object] 90mm (10m), 180mm (20m), 260mm (30m) |
Insulation Resistance (MOhm) |
10DC500V Megger |
Outer Dimensions |
50x50x70 mm (main unit only) |
Time |
Scanning: 25ms (motor rotation speed 2400rpm) *When using measurement commands other than MD, MS, and ME, the response speed may be slower depending on the surrounding environment. |
Offset Angle |
Scans: 270° |
Repeatability (mm) |
*Distance accuracy is based on the reference reflector under the standard environment at the time of shipment. In a low temperature environment of -11°C or below, the detection distance is as follows: 90% reflectivity white Kent paper: 0.05m to 25m, 10% reflectivity black paper: 0.05m to 8m |
Subscribe to Newsletter
Sign up to get exclusive offers from our favorite brands and to be well up in the news
