Chat
Ships within 25 days
View
View
View
View
| Response Time | Output: [Normal operation mode] 189 ms or less (scan time 100 ms/1 rotation) [Low speed scan mode] 200 ms or less (scan time 110 ms/1 rotation), in 2 scan operation mode, the above plus each scan time. Note: When switching areas, there will be an additional delay of up to 1 scan time. Input capture cycle / 1 scan time (100 ms or 110 ms) (However, when the emission stop state is selected from an external input, the input capture cycle is 1 ms) |
| Output | Photocoupler NPN/open collector output (DC30V 50mA or less), Output 1, 2, 3: Output OFF when detected within the area, Fault output: Output ON under normal conditions* *When a fault output is issued, all outputs 1 to 3 will indicate detection. |
| Material | Case front: Polycarbonate, Case back: ABS resin |
| Type of Product | Photoelectric Sensor |
Response Time |
Output: [Normal operation mode] 189 ms or less (scan time 100 ms/1 rotation) [Low speed scan mode] 200 ms or less (scan time 110 ms/1 rotation), in 2 scan operation mode, the above plus each scan time. Note: When switching areas, there will be an additional delay of up to 1 scan time. Input capture cycle / 1 scan time (100 ms or 110 ms) (However, when the emission stop state is selected from an external input, the input capture cycle is 1 ms) |
Output |
Photocoupler NPN/open collector output (DC30V 50mA or less), Output 1, 2, 3: Output OFF when detected within the area, Fault output: Output ON under normal conditions* *When a fault output is issued, all outputs 1 to 3 will indicate detection. |
Material |
Case front: Polycarbonate, Case back: ABS resin |
Type of Product |
Photoelectric Sensor |
Vibration Resistance |
10 to 55Hz, double amplitude 1.5mm, 2 hours each in X, Y, and Z directions |
Shock Resistance |
490m/s2 (10 times each in X, Y, and Z directions) |
Power Supply Voltage |
DC24 (operating voltage range 18 to 30, ripple within 10%) |
Light Source |
Infrared LED |
Protection Class |
IP64 (IEC standard) |
Operation Mode |
[2-scan operation mode (specify outputs 1 to 3 individually when setting each detection area)] Detects the presence of an obstacle with two consecutive scans, while normal operation requires one scan. [Mirror reflection avoidance mode (specify when setting each detection area)] Prevents false detection of highly reflective objects up to 20 m away. However, the minimum detection width at 3 m is increased to 400 mm. [Slow scan mode (set by software switch)] Scan time 110 ms (100 ms during normal operation). Response delays due to mutual interference with the PBS during normal operation are kept to within one scan. |
Model No |
PBS-03JN |
Mass (g) |
About 500 |
Ambient Illumination to Use (Lx) |
Halogen/mercury lamps: 10,000 or less, fluorescent lamps: 6,000 or less (Note) If exposed to strong light such as sunlight directly, erroneous output may occur. |
Current Consumption (mA) |
250 or less (100 or less when light emission is stopped), excluding input/output terminal current and inrush current (500) |
Monotaro ID |
58766901 |
Indicator Lamp |
[Power supply indicator (green)] Flashes when a fault is detected, Output 1, 2, 3 [Indicator (orange)] Lights up when detected within the area |
Country of Origin |
Japan |
Import Country |
Direct Import from Japan |
Connector |
1m pull-out cable |
Name of Manufacturer/Packer/Importer |
Hokuyo Electric Co., Ltd. |
Specifications |
●Area setting: [Output 1 setting] Freely set from 0 to 6m in the optical axis direction with up to 7 pointers. [Output 2 and 3 setting] Set in a straight line in the front direction, in a fan shape in the optical axis direction, or set as a percentage of the Output 1 pointer. ●Hysteresis: 10% or less of the detection distance (cannot be smaller than 60mm). ●Detection area setting: Set the area number using inputs 1, 2, 3, and 4. Turning inputs 1, 2, 3, and 4 all ON stops light emission (OFF/H level input, ON/L level input). ●Detection object and detection range: White Kent paper 300mm square (installed parallel to the sensor's light-emitting surface), 0.2 to 3mx2m (origin is at the center of the scan). However, the scan angle must be within 180°. ●Inputs (inputs 1 to 4): Photocoupler input (anode common, each input current 4mA or more). Switches the set detection area. |
Operating Temperature / Humidity Range |
-10 to +50°C, 85% RH or less (no condensation or freezing) |
Motor |
5 Year |
Subscribe to Newsletter
Sign up to get exclusive offers from our favorite brands and to be well up in the news
