View
View
View
View
| Type | Analog output type |
| Material | Case material: PC, Lens: PMMA |
| Protection Circuit | Reverse connection protection, overcurrent protection |
| Type of Product | Photoelectric/Laser Sensor |
Type |
Analog output type |
Material |
Case material: PC, Lens: PMMA |
Protection Circuit |
Reverse connection protection, overcurrent protection |
Type of Product |
Photoelectric/Laser Sensor |
Standard |
[EMC]EMC Directive (2014/30/EU) |
Power Supply Voltage |
DC12 to 30, including ripple (PP) 10% *For analog output types, use a power supply voltage of DC12.0 or higher to ensure normal output. |
Light Source |
[Medium/Wavelength] Red laser diode (wavelength: 650 nm, maximum output: 64 mW, light emission pulse: 7 ns, light emission period: 11.11 MHz) [Average output] 390 μW or less |
Protection Class |
IP67 |
Operation Mode |
Light (when light is received) ON, Dark (when light is blocked) ON Switchable by setting |
Control Output |
NPN/PNP setting switch, open collector 30V/100mA, residual voltage 1.8V or lessx1 point |
Model No |
LX2-257AG |
Mass (g) |
About 88 |
Ambient Illumination to Use (Lx) |
[Sunlight] Light receiving surface illuminance 4000 or less [Fluorescent lamp] Light receiving surface illuminance 3000 or less |
Current Consumption (mA) |
60 or less *Control output charge current not included. |
Monotaro ID |
58766806 |
Applicable Standard |
EN 60947-5-7 /IEC 60825-1 |
Detection Distance (m) |
0.25 to 2.5 (reflectance 6% black paper / 18% gray paper / 90% white paper) |
Laser Spot Diameter |
Φ10mm / 2.5m *Defined at the maximum detection distance with a center intensity of 1/e(2 13.5%). If there is light leakage other than the specified spot size and there is an object with high reflectivity near the detection distance, it may be affected. |
Distance Setting |
Teaching, fine adjustment with +/- buttons |
Country of Origin |
Japan |
Import Country |
Direct Import from Japan |
Included Components |
Mounting screws (M3x20 mm), mounting bracket |
Display Type |
Output indicator: Orangex1 (2 locations on the left and right), Stability indicator: Green, Unstable indicator: Red, Laser OFF: Off |
Name of Manufacturer/Packer/Importer |
Hokuyo Electric Co., Ltd. |
Specifications |
●Sampling cycle/response speed: 200μs/0.5ms or less (when moving average count is 1)●Differential distance *Reflectivity/black paper 6% / gray paper 18% / white paper 90%: 3% or less (moving average count: 64 times / 256 times, distance: 1m to 2.5m) Representative example●Mutual interference prevention: Up to 2 units |
Operating Temperature / Humidity Range |
-10 to 50°C/35 to 85% RH (no freezing or condensation) |