Showing 40 out of 5079 products
Type of Product : Bronze Asbestos Packed Water Level Gauge
Test Pressure : Tested to 300Psig. Hyd. (21.09 kg/cm² (Hyd.)
Working Pressure : Max. BOP 150Psig.(10.54kg/cm²) at 435ºF(225ºC)
Product Standard : Standard Pattern
End Details : Screwed Male BSP Parallel threads to BS-21
Type of Product : Bronze Pressure Gauge Valve
Test Pressure : Tested to 500Psig. Hyd. (35.15 kg/cm² (Hyd.)
Seat Type : Plug Type
Working Pressure : Max. BOP 250Psig.(17.58kg/cm²) at 435ºF(225ºC)
End Details : Screwed female BSP Parallel threads to BS-21
Type of Product : Bronze Combined Feed Check Valve
Test Pressure : Tested to 500Psig. Hyd. (35.15 kg/cm² (Hyd.)
Disc Type : Renewable Disc
Seat Type : Integral
Trim : Cu-Alloy
Working Pressure : Max. BOP 250Psig.(17.58kg/cm²) at 435ºF(225ºC)
Pattern Type : Right Angle Pattern
End Details : Flanges as per BS 10 Table-H F.F. undrilled
Seat Type : Renewable Seat
Disc Type : Renewable Disc
Type of Product : Pilot Operated R Type Reducing Valve
Trim : Stainless Steel AISI 410/Monel
Model No : CI 10
Pattern Type : Straight Type
Material : Cast Iron
Body Test Pressure : 21.09kg/cm²g (300Psig.) Hyd.
Working Pressure : Max BOP 10.54kgf/cm²g (150Psig.) at 220ºC Steam
End Details : Flanges as per BS 10 Table F, FF (Drilled)
Seat Type : Renewable Seat
Disc Type : Renewable Disc
Type of Product : Double Post Hi Lift Safety Valve
Model No : CI 9
Material : Cast Iron
Body Test Pressure : Shell Test 21.09kg/cm²g (300Psig.) Hyd.
Working Pressure : Max BOP 150Psig. (10.54kgf/cm²g) at 220ºC Steam
Outlet Flange : BS 10 Table D
Inlet Flange : BS 10 Table F
Seat Type : Renewable Seat
Disc Type : Renewable Disc
Type of Product : Single Post Hi Lift Safety Valve
Trim : Stainless Steel AISI 410/Monel
Model No : CI 8
Pattern Type : Right Angle
Material : Cast Iron
Body Test Pressure : Shell Test 21.09kg/cm²g (300Psig.) Hyd
Working Pressure : Max BOP (10.54kgf/cm²g) 150Psig. at 220ºC Steam
Outlet Flange : BS 10 Table D undrilled
Inlet Flange : BS 10 Table F undrilled
Type of Product : Ball Valve
Trim : AISI 410 Stem Stainless Steel AISI 304 Ball
Body Material : Cast Iron
Product Standard : IS-9890 -1981 Class-125
Seat Type : Renewable Teflon Seat
Model No : CI 18
Body Test Pressure : 21barg 300Psig. Hyd.
Seat Test Pressure : 220Psig.(15.4barg) Hyd. & 100Psig. (6.9 bar)
End Connection Type : Flanged
Type of Product : Ball Valve
Trim : AISI 410 Stem, Stainless Steel AISI 304 Ball
Body Material : Cast Iron
Product Standard : IS-9890 -1981 Class-125
Pattern Type : Straight
Seat Type : Renewable Teflon
Model No : CI 17
Body Test Pressure : 21barg 300Psig. Hyd
Seat Test Pressure : 220Psig.(15.4barg) Hyd. & 100Psig. (6.9 bar)
End Connection Type : Screwed
Type of Product : Check Valve
Body Material : Stainless Steel 304
Disc Type : Stainless Steel CF-8
Class : PN-40
Disc Material : Stainless Steel 304
End Connection Type : Wafer Type
Body Test Pressure : 60 Barg Hyd
Seat Test Pressure : 40 Barg Hyd.
Type of Product : Stainless Steel Steam Trap
Material : Stainless Steel
Model No : IC-3
Body Test Pressure : 63.3 kg/cm² 900 Psig. (Hyd.)
End Connection Type : Screwed
Working Pressure : Suitable for 450 Psig. (31.65 kg/cm²)
Trim : AISI 420
Maximum Temperature : 400ºC (750ºF)
Type of Product : Wedge Gate Sluice Valve
Model No : CR 19B
Seat Test Pressure : 1.6MPa Hyd. (232Psig.) Hyd
Trim : Cu-Alloy Seats, Stem SS AISI 410
Body Test Pressure : 2.4MPa Hyd. (348Psig.) Hyd
Seat Type : Renewable
Class : PN 1.6 PD Type
End Details : Flanges Drilled as per IS-1538 FF Drilled
Body Material : Cast Iron
Type of Product : Wedge Gate Sluice Valve
Model No : CR 19A
Seat Test Pressure : 1.6MPa Hyd. (232 Psig. Hyd.)
Trim : Cu-Alloy Seats, Stem SS AISI 410
Body Test Pressure : 2.4MPa Hyd. (348 Psig. Hyd.)
Seat Type : Renewable
Class : PN 1.6 PD Type
End Details : Flanges as per IS-1538 FF Drilled
Body Material : Cast Iron
Type of Product : Wedge Gate Sluice Valve
Model No : CR 32B
Seat Test Pressure : 1.6 MPa Hyd. (232 Psig)
Trim : Cu-Alloy, Stem SS (12 Cr. 12)
Body Test Pressure : 2.4 MPa Hyd. (348 Psig)
Product Standard : IS-14846 duly ISI Marked
Seat Type : Renewable
Class : PN 1.6 PD Type
End Details : Flanges as per IS 1538 F/F Drilled
Body Material : Cast Iron
Type of Product : Wedge Gate Sluice Valve
Model No : CR 32A
Seat Test Pressure : 1.0 MPa (Hyd.)
Trim : Cu-Alloy, Stem SS AISI-410
Body Test Pressure : 1.5 MPa (Hyd.)
Seat Type : Renewable
Class : PN 1.0 PD Type
End Details : Flanges as per IS 1538 F/F Drilled
Body Material : Cast Iron
Type of Product : Butterfly Valve
Body Test Pressure : 2.4 MPa (348 Psig Hyd.)
Model No : CR 21B
Pattern Type : Medium Pattern
Body Material : Cast Iron
Stem : AISI-410 Stainless Steel
Disc Material : SG Iron
Lining Material : Nitrile/EPDM Rubber Lining
Type of Product : Butterfly Valve
End Connection Type : Short Wafer Type
Body Test Pressure : 2.4 MPa (348 Psig Hyd.)
Model No : CR 21A
Pattern Type : Short Pattern
Body Material : Cast Iron
Class : PN-16
End Details : Suitable insertion between Flanges as per BS-10 Table D/E
ANSI B 16.1 CI-125
Disc Material : SG Iron
Working Pressure : PN 16
Lining Material : Nitrile/EPDM
Seat Test Pressure : 1.6 MPa (200 Psig Hyd.)
Type of Product : Butterfly Valve
Body Test Pressure : 3.0 MPa Hyd.
Model No : CR 27A
Pattern Type : Wafer Type
Body Material : Cast Iron
Class : PN20
End Details : Suitable insertion between Flanges as per BS-10 Table D/E or ASME B 16.1, Class-125
Stem : SS AISI-410
Operated By : Lever Operated
Disc Material : Stainless Steel 304
Lining Material : Nitrile/EPDM
Seat Test Pressure : 2.2 MPa Hyd
Type of Product : Lever Operated Butterfly Valve
Body Test Pressure : 1.5MPa Hyd.
Model No : CR 24
Pattern Type : Short Pattern
Body Material : Cast Iron
Class : PN10
End Details : Suitable insertion between Flanges as per BS-10 Table D/E & B 16.1 CI-125
Stem : AISI-410
Operated By : Lever Operated
Disc Material : Stainless Steel
Lining Material : Nitrile/EPDM
Seat Test Pressure : 1.10MPa Hyd.
Type of Product : Lever Operated Butterfly Valve
Body Test Pressure : 1.5MPa Hyd.
Model No : CR 23
Pattern Type : Short Pattern
Body Material : Cast Iron
Class : PN10
End Details : Suitable insertion between Flanges as per BS-10 Table D/E & B 16.1 CI-125
Stem : AISI-410
Operated By : Lever Operated
Disc Material : SG Iron
Lining Material : Nitrile/EPDM
Seat Test Pressure : 1.10 MPa Hyd
Type of Product : Butterfly Valve
Body Test Pressure : 2.4 MPa (348 Psig Hyd.)
Model No : CR 22B
Pattern Type : Medium Pattern
Body Material : Cast Iron
Class : PN16
End Details : Suitable insertion between Flanges as per BS-10 Table D/E ANSI B 16.1 CI-125
Stem : AISI-410 Stainless Steel
Disc Material : CF 8 Stainless Steel
Type of Product : Butterfly Valve
Body Test Pressure : 2.4 MPa Hyd. (348 Psig.)
Model No : CR 28C
Pattern Type : Short Pattern
Body Material : Cast Iron
Class : PN 1.6
End Details : Suitable insertion between Flanges as per BS-10 Table D/E CI-125
Stem : AISI-304 Stainless Steel
Operated By : Lever Operated
Disc Material : CF-8M Stainless Steel
Seat Test Pressure : 1.6 MPa Hyd. (232 Psig.)
Type of Product : Reflux Valve
Body Material : Cast Iron
Seat Type : Integral Seat / Renewable
Product Standard : IS 5312
Pattern Type : Straight Type
Class : PN-1.6
Trim : Body Seat Ring Gun Metal & Seat Ring Rubber
Body Test Pressure : 2.4MPa (348Psig. Hyd.)
Seat Test Pressure : 1.6MPa (232Psig. Hyd.)
Model No : CR 31 A
End Details : Flanges as per IS-1538
Disc Type : Renewable
Type of Product : Horizontal Check Valve
Body Material : Cast Steel
Product Standard : BS 5160/DIN 2401
Disc Type : Renewable Disc
Class : PN-40
Disc Material : Renewable Disc
Seat Type : Renewable Seat
Trim : Stainless Steel AISI-410
End Connection Type : Flanged
Body Test Pressure : 76barg (1100 Psig.) Hyd
Seat Test Pressure : 40barg (580 Psig.) Hyd.
Type of Product : Reflux Valve
Body Material : Cast Iron
Seat Type : Integral Seat / Renewable
Product Standard : IS 5312 PN-1.0
Trim : Body Seat Ring Gun Metal & Seat Ring Rubber
Body Test Pressure : 1.5 MPa Hyd
Seat Test Pressure : 1.0 MPa Hyd
Model No : CR 31
End Details : Flanges as per IS:1538
Disc Type : Renewable
Type of Product : Butterfly Valve
Body Test Pressure : 3.8 MPa Hyd.
Model No : CR 28D
Pattern Type : Wafer Type
Body Material : SG Iron
Class : PN25
End Details : Suitable insertion between Flanges as per BS-10 Table D/E or ASME B 16.1, Class-125
Stem : SS AISI-410
Disc Material : Stainless Steel 304
Lining Material : Nitrile/EPDM
Seat Test Pressure : 2.7 MPa Hyd
Type of Product : Parallel Slide Blow Off Valve
Working Pressure : Max. BOP 350 Psig. 24.61kg/cm²g at 400ºC
Test Pressure : 700Psig. Hyd. 49.23kg/cm²g
Body Material : Cast Steel
Stem : SS AISI 410/Monel
Seat Type : Renewable Seat
Model No : CS 4
Disc Type : Renewable Disc
End Details : Flanges as per BS10 Table J F.F. Undrilled
Type of Product : Gate Valve
Model No : CS 7A
Seat Test Pressure : 56barg(815Psig.) Hyd. 6.9barg AIR (100Psig.)
Trim : SS AISI-410 with Aluminum Bronze Sleeve
Body Test Pressure : 76barg Hyd. (1110 Psig)
Product Standard : Conforming to BS 1414/API-600
Seat Type : Renewable Seat
Class : Class-300
Pattern Type : Straight
Body Material : Cast Steel
Type of Product : Horizontal Check Valve
Body Material : Cast Steel
Product Standard : BS 1868
Disc Type : Renewable Disc
Class : Class 300
Seat Type : Renewable Seat
Trim : SS AISI-410
Body Test Pressure : 76 Barg (1102 Psig.) Hyd
Seat Test Pressure : 56 Barg (815 Psig.) Hyd. 6.9 Barg (100 Psig.) AIR
Type of Product : Gate Valve
Disc Type : Solid Wedge
Seat Type : Renewable Seat
Trim : SS AISI 410
Pattern Type : Standard Bore
Body Material : Forged Steel
Class : Class-800
Product Standard : BS 5352/API 602
End Details : Screwed female NPT threads
Gasket : Spiral wound SS 304/(CAF/Graphite Filled)
Body Test Pressure : 207 barg Hyd.(3000 Psig)
Seat Test Pressure : 152 barg (2200Psig.) Hyd. (6.9barg (100Psig.) AIR
Fastener : Alloy Steel (Gr. B7/2H)
Type of Product : Globe Valve
Disc Type : Renewable Disc
Seat Type : Renewable Seat
Trim : AISI-410
Body Material : Forged Steel
Class : Class 600
Product Standard : API 602
End Details : Flanges as ASME B 16.5 Class 600 RF Undrilled
Body Test Pressure : 153 Barg (2220Psig.) Hyd
Seat Test Pressure : 112 Barg (1630Psig.) Hyd. 6.9 Barg (100 Psig) AIR
Type of Product : Globe Valve
Disc Type : Renewable Disc
Seat Type : Renewable Seat
Trim : SS AISI-410
Body Material : Forged Steel
Class : Class 1500
Product Standard : Conforming to BS-5352/API 602
End Details : Socket Welded ends as per ASME B 16.11
Body Test Pressure : 384 barg Hyd.
Seat Test Pressure : 281 barg Hyd., 6.9 barg (100 Psig) AIR
Type of Product : Globe Valve
Disc Type : Renewable Disc
Seat Type : Renewable Seat
Trim : Type 410
Pattern Type : Stardard Bore
Body Material : Forged Steel
Class : Class-800
Product Standard : conforming to BS 5352/API 602
End Details : Socket Welded Ends as per ASME B 16.11
Gasket : Spiral wound SS 304/(CAF/Graphite Filled)
Body Test Pressure : 207 barg (3000Psig.) Hyd.
Seat Test Pressure : 152 barg(2200Psig.) Hyd. 6.9barg (100Psig.) AIR
Fastener : Alloy Steel (Gr. B7/2H)
Type of Product : Globe Valve
Disc Type : Renewable Disc
Seat Type : Renewable Seat
Trim : Type 410
Pattern Type : Stardard Bore
Body Material : Forged Steel
Class : Class-800
Product Standard : conforming to BS 5352/API 602
End Details : Screwed Female NPT Threads
Gasket : Spiral wound SS 304/(CAF/Graphite Filled)
Body Test Pressure : 207 barg (3000Psig.) Hyd.
Seat Test Pressure : 152 barg(2200Psig.) Hyd. 6.9barg (100Psig.) AIR
Fastener : Alloy Steel (Gr. B7/2H)
Type of Product : Horizontal Check Valve
Body Material : Forged Steel
Product Standard : Conforming to BS-5352/API 602
Disc Type : Renewable Disc
Class : Class 1500
Seat Type : Renewable Seat
Trim : SS AISI-410
Body Test Pressure : 384 barg Hyd
Seat Test Pressure : 281 barg Hyd., 6.9 barg (100 Psig) AIR
Type of Product : Horizontal Lift Check Valve
Fastener : Alloy Steel (Gr. B7/2H)
Body Material : Forged Steel
Product Standard : BS 5352/API 602
Disc Type : Renewable Disc
Class : Class-800
Pattern Type : Stardard Bore
Gasket : Spiral wound SS 304/(CAF/Graphite Filled)
Seat Type : Renewable Seat
Trim : SS AISI 410
Body Test Pressure : 207 barg (3000Psig.) Hyd.
Seat Test Pressure : 152 barg (2200Psig.) Hyd.
Type of Product : Horizontal Lift Check Valve
Fastener : Alloy Steel (Gr. B7/2H)
Body Material : Forged Steel
Product Standard : BS 5352/API 602
Disc Type : Renewable Disc
Class : Class-800
Pattern Type : Stardard Bore
Gasket : Spiral Wound SS 304 with CAF/Graphite Filled
Seat Type : Renewable Seat
Trim : SS AISI 410
Body Test Pressure : 207 barg Hyd. (3000 Psig)
Seat Test Pressure : 152 barg (2200Psig.) Hyd.
Type of Product : Globe Valve No. 9
Disc Type : Renewable Disc
Seat Type : Integral Seat
Trim : Cu-Alloy
Pattern Type : Standard Pattern
Body Material : Bronze
End Details : Flanges as per BS 10 Table F Undrilled
Body Test Pressure : 35.15kg/cm²g (500Psig.) Hyd.
Body Material cum standard : GM IS 318 Gr. LTB 2
Seat Test Pressure : 21.09kg/cm²g (300Psig.) Hyd
Type of Product : Globe Valve No. 5
Disc Type : Renewable Disc
Seat Type : Integral Seat
Trim : Cu-Alloy
Pattern Type : Standard Pattern
Body Material : Bronze
End Details : Screwed female BSP threads to BS-21
Body Test Pressure : 35.15kg/cm²g (500Psig.) Hyd
Body Material cum standard : GM IS 318 Gr. LTB 2
Seat Test Pressure : 21.09kg/cm²g (300Psig.) Hyd
Type of Product : Globe Valve No. 8
Disc Type : Renewable Disc
Seat Type : Integral Seat
Trim : Cu-Alloy
Pattern Type : Medium Pattern
Body Material : Bronze
End Details : Flanges as per BS 10 Table D
Body Test Pressure : 21.09kg/cm²g (300Psig.) Hyd.
Body Material cum standard : GM IS 318 Gr. LTB 2
Seat Test Pressure : 14.06kg/cm²g (200Psig.) Hyd.
Page 16 of 127 results
| Product Name | Specifications | Expected Price | Dispatch Time | Discount |
|---|---|---|---|---|
| Aerotac 2W-160-15 Size 12.7 mm (1/2 Inch) Brass Diapharam Valve | Material Brass | No. Of Way 2/2 Way | ₹1,533 | 3 days | 16.18% OFF |
| Mercury NR5 Non-Return Valve | Material Aluminium | Port Size 19.05 mm | ₹697 | 2 days | -- |
| RN 6.35 mm (1/4 inch) Forged Brass Male & Female Mini Ball Valve, RN220008MF | -- | ₹247 | 24 hrs | 69.09% OFF |
| Drp 3/4 Inch, 20 mm Bronze Pressure Reducing Valve | End Connection Type Screwed | Material Bronze | ₹1,482 | 4 days | -- |
| Alto 20mm Cast Iron No.4 SCD Wheel Valve with Brass / G.M. Working Part | -- | ₹518 | 90 days | -- |
| Damor 1/8 Inch Non Return Valve CV01 | Color Silver | Finishing Polished | ₹199 | 3 days | 0.21% OFF |
| Zoloto 25 mm Brass Ball Valve 1008B | Body Material Brass | Bore Full | ₹884 | 24 hrs | -- |
| Valson 1/2 Inch SS 304 Ball Float Valve Screwed BSP | Ball Diameter (Mm) 100 mm | Body Material Stainless Steel 304 | ₹1,593 | 24 hrs | -- |
| Prayag 25 mm Ball Cock Body - Cat No. 163 | Size (Cm) 2.54 cm | Size (Inch) 1 Inch | ₹221 | 24 hrs | -- |
| Kartar 5 Inch,125 mm Cast Iron Reflux Valve (Non-Return Valve) K 515 | Body Material Cast Iron | Color Black | ₹14,500 | 5 days | -- |
Subscribe to Newsletter
Sign up to get exclusive offers from our favorite brands and to be well up in the news
