View
View
View
View
| Model No | HT2401T4R4-E1C2 |
| Resolution | Analog output/output: 16bit (50000 or more) |
| Display | Indicator: 1 LED, set via power supply/control input, Numerical display/5 digits: 7-segment LED, character height 9mm, red LED, Display range/-19999 to 99999, Over display/OL, Zero display/leading zero suppression, Display update time/0.3 seconds (can be set within the range of 0.1 to 9.9 seconds), Display accuracy/20 ppm ± 1 digit at 23°C |
| Type of Product | Digital Panel Meter |
Model No |
HT2401T4R4-E1C2 |
Resolution |
Analog output/output: 16bit (50000 or more) |
Display |
Indicator: 1 LED, set via power supply/control input, Numerical display/5 digits: 7-segment LED, character height 9mm, red LED, Display range/-19999 to 99999, Over display/OL, Zero display/leading zero suppression, Display update time/0.3 seconds (can be set within the range of 0.1 to 9.9 seconds), Display accuracy/20 ppm ± 1 digit at 23°C |
Type of Product |
Digital Panel Meter |
Country of Origin |
Japan |
Monotaro ID |
66272547 |
Import Country |
Direct Import from Japan |
Operation Type |
Delta-sigma integration method |
Input Signal |
Thermistor |
Measurement Range |
40 KΩ |
Load Resistance |
Analog output: Voltage output -4.7 KΩ or more, current output -300Ω or less |
Name of Manufacturer/Packer/Importer |
COCO RESEARCH |
Input Power |
DC 12-30 V |
Specifications |
●Isolation: Power supply/thermistor input/other input/output●Analog: 0-10V●Analog output/D/A conversion method: DAC conversion method●Analog output/output scaling: Full scale and zero scale can be set to any scaling possible●Analog output/output update time/output response time: 1ms to 9999ms settable in 1ms increments, 0-90% response time less than 1ms●Analog output/output accuracy/temperature fluctuation: Voltage output to ±0.1% of FS@23°C, current output to ±0.1% of FS@23°C / ±200ppm/°C or less●Comparator/output type: Isolated non-contact output (photoMOS relay), no polarity. When the comparator operating condition is ON, the resistance between COMP and COM is 50Ω or less.●Comparator/output load voltage/output logic/update time: Peak AC/DC 280V 100mA (resistive load), ON resistance maximum 50Ω or less, comparison is performed with polarity (negative to 0 (large) Response time: 1 ms (max) depending on analog output update time setting. Digital: None. Calculation unit/moving average: 1999/01/01. Update time (ms): 1. Setting value storage: Non-volatile memory (EEPROM). Resistance measurement error rate: ±0.02% FS @23°C. Conversion accuracy example: [Calculation formula 1] 0°C to 100°C within ±0.5% rdg / 100°C to 150°C within ±3% rdg [Calculation formula 2] 0°C to 150°C within ±0.05% rdg (Calculation formulas 1 and 2 are based on the Shibaura Electronics PB43 factory settings. Resistance measurement error is not included.) |
Power Consumption (W) |
3 or less |
Open Voltage (V) |
3.3 Measurement current 50uA |
Withstand voltage (V) |
Between power supply/thermistor input/other input/output terminals DC500 for 1 minute |
Operating Temperature / Humidity Range |
-10℃ to +50℃ 35 to 85%RH (non-condensing) |
Tip Shape |
Input response action: None or 1 point (depending on model) [D2] Option adds 2 points |
Output update time |
1ms - 9999ms Can be set in 1ms increments |
Comparator |
2 points |
Communication Function |
USB: Reading and writing of setting values / continuous output of measured values |
USB |
Communication specifications: USB 2.0 (USB virtual COM serial port communication 230.4 kbps) |
3 options, 3 price levels
Volume discounts
Price locked 30 days