Ships within 19 days
View
View
View
View
| Model No | SPD-2401W-R1S03C2 |
| Resolution | Analog output: 16-bit (over 50,000), input: approx. 10.4 ns (96 MHz) |
| Power Supply | Sensor: None |
| Display | Numerical display: Display range: -199999 to 999999, Polarity display: - lights up when rotating in reverse, Over display: OL, Zero display: Leading zero suppression |
Model No |
SPD-2401W-R1S03C2 |
Resolution |
Analog output: 16-bit (over 50,000), input: approx. 10.4 ns (96 MHz) |
Power Supply |
Sensor: None |
Display |
Numerical display: Display range: -199999 to 999999, Polarity display: - lights up when rotating in reverse, Over display: OL, Zero display: Leading zero suppression |
Type of Product |
Digital Panel Meter |
Function |
Low cut: Stop detection occurs when the speed is below the set value |
Country of Origin |
Japan |
Input Method |
A/B phase |
Operating Temperature Range |
-10 to +50 ℃ (non-condensing) |
Monotaro ID |
66272739 |
Import Country |
Direct Import from Japan |
Input Signal |
General purpose, 5V logic, zero cross, NPN open collector, 12V logic, input customization signal |
Load Resistance |
Analog output: Voltage output -4.7 KΩ or more, current output -300Ω or less |
Name of Manufacturer/Packer/Importer |
COCO RESEARCH |
Input Power |
DC 12-30 V |
Analog Output |
±10 V |
Specifications |
●Isolation: Power supply/other input/output●Analog output/D/A conversion method: DAC conversion method●Analog output/output scaling: Arbitrary scaling possible using full scale and zero scale settings●Analog output/output update time: 0.1ms - 9999.9ms settable in 0.1ms increments●Analog output/output accuracy/temperature fluctuation: Voltage output - ±0.1% of FS@23℃, current output - ±0.1% of FS@23℃ / ±200ppm/℃ or less●Analog output/input/output delay time: Output update time + analog rise time 150μs or less●Comparator/update time: Response time depends on the analog output update time setting 1ms (max)●Comparator/output form: Isolated non-contact output (photoMOS relay), no polarity. When the comparator operating condition is ON, the resistance between COMP and COM is [C2] (2 points) 50Ω or less / [C1] (1 point) 100Ω or less. ● Comparator/output load voltage: Peak AC/DC 280V 100mA (resistive load) ON resistance maximum 50Ω or less ● Comparator/output logic: Comparison is performed with polarity (0 is greater than negative) ● Dynamic prediction TM: 8 levels (including continuous prediction and stop prediction) ● Digital communication: RS-485 ● Calculation rate: Set the reference pulse number, reference change amount, and speed unit time for the input frequency. ● Output moving average: 1999/01/01 ● Division ratio: 1 to 60000 |
Power Consumption (W) |
3 or less |
Withstand voltage (V) |
Power supply/other input/output - between each terminal DC500 for 1 minute |
Output update time |
1ms - 9999.9ms Settable in 0.1ms increments |
Comparator |
2 points |
Communication Function |
USB: Reading and writing of setting values / continuous output of measured values |
Number of Input Points |
1 |
Operating Humidity Range |
35 to 85% RH (non-condensing) |
Measurement Modes |
Speedometer / Frequency meter / Period meter (second unit only) / Totalizer [switchable] |
Input Frequency (Hz) |
0.0006- 1.0M |
Looking for bulk pricing or different specifications?
Subscribe to Newsletter
Sign up to get exclusive offers from our favorite brands and to be well up in the news
