View
View
View
View
| Model No | CAN-2401-R1C2 |
| Resolution | Analog output/output: 16bit (50000 or more) |
| Display | Indicator: 1 LED, power supply, Numerical display / 5 digits: 7-segment LED character height 9mm, red LED, Display range / -19999 to 99999, Over display / OL, Zero display / Leading zero suppression, Display update time / 0.3 seconds (can be set in the range of 0.1 to 9.9 seconds), Display accuracy / 20 ppm ± 1 digit at 23°C |
| Type of Product | Digital Panel Meter |
Model No |
CAN-2401-R1C2 |
Resolution |
Analog output/output: 16bit (50000 or more) |
Display |
Indicator: 1 LED, power supply, Numerical display / 5 digits: 7-segment LED character height 9mm, red LED, Display range / -19999 to 99999, Over display / OL, Zero display / Leading zero suppression, Display update time / 0.3 seconds (can be set in the range of 0.1 to 9.9 seconds), Display accuracy / 20 ppm ± 1 digit at 23°C |
Type of Product |
Digital Panel Meter |
Function |
Data interruption detection: A detection function when data reception is interrupted. Data reception interval can be set from 1s to 999s. The interruption detection can be set to an alarm output on COM1 (output when the interruption detection time has elapsed). |
Country of Origin |
Japan |
Monotaro ID |
66272565 |
Import Country |
Direct Import from Japan |
Input Signal |
CAN |
Load Resistance |
Analog output: Voltage output -4.7 KΩ or more, current output -300Ω or less |
Name of Manufacturer/Packer/Importer |
COCO RESEARCH |
Input Power |
DC 12-30 V |
Specifications |
●CAN BPS: Selectable from 10k / 20k / 50k / 100k / 250k / 500k / 1Mbps●CAN FORMAT: Selectable from INTEL (Little Endian) / MOTOROLA (Big Endian)●CAN FRAME: Selectable from Standard (11-bit ID) / Extended (29-bit ID)●Isolation: Power supply/other input/output●Analog: ±10V●Analog output/D/A conversion method: DAC conversion method●Analog output/output scaling: Arbitrary scaling possible by setting full scale or zero scale●Analog output/output update time/output response time: 1ms to 9999ms, selectable in 1ms increments; 0-90% response time of less than 1ms●Analog output/output accuracy/temperature fluctuation: Voltage output to ±0.1% of FS@23℃, current output to ±0.1% of FS@23℃ / ±200ppm/℃ As follows: ● Comparator/output type: Insulated non-contact output (photoMOS relay), no polarity. When the comparator operating condition is ON, the resistance between COMP and COM is 50Ω or less. ● Comparator/output load voltage, output logic, and update time: Peak AC/DC 280V 100mA (resistive load). ON resistance is 50Ω or less maximum. Comparison is performed with polarity (0 is greater than negative). Depends on the analog output update time setting. Response time: 1ms (max). ● Data frame: 8 bytes. Set the receive data type and start read byte. ● Digital: None. ● Bit reception: Bit arrangement (numbering). Receive 1-bit data from 0 to 63 bits (specify the read byte and bit position). ● Extended ID upper 5-bit mask: Mask the upper 5 bits of the extended ID (29 bits). Function: Receive judgment is possible excluding the upper 5 bits. ● Update time (m): 1. ● Receive data type: FLOAT, DOUBLE, U32, S32, U16, S16, U8, S8, 1 bit Setting value storage: Non-volatile memory (EEPROM) |
Power Consumption (W) |
3 or less |
Withstand voltage (V) |
Power supply/other input/output between each terminal DC500 for 1 minute |
Operating Temperature / Humidity Range |
-10℃ to +50℃ 35 to 85%RH (non-condensing) |
Output update time |
1ms - 9999ms Can be set in 1ms increments |
Comparator |
2 points |
Communication Function |
USB: Reading and writing of setting values / continuous output of measured values |
USB |
Communication specifications: USB 2.0 (USB virtual COM serial port communication 230.4 kbps) |
Number of Input Points |
1point |
Input Connector |
Spring lock type plug connector / Optional M2 screw type plug connector |
Communication Standard |
CAN2.0B |
Unit Type |
CAN integer data / rate between two points |
3 options, 3 price levels
Volume discounts
Price locked 30 days